®
Designed for use as a recovery heater having its own storage tank or booster for supplying sanitizing rinse water for dish washing.
MEETS THE THERMAL EFFICIENCY AND
OR STANDBY LOSS REQUIREMENTS
OF THE U.S. DEPARTMENT OF ENERGY
AND CURRENT EDITION OF ASHRAE/
ISENA 90.1.
ADVANCED ELECTRONIC CONTROL
• Plain English text and animated icons display detailed operational and diagnostic information.
Fault or Alert messages appear if an operational issue occurs.
• Immersion temperature control adjustable through a range of 90°F to 190°F.
STANDARD VOLTAGES
• 208, 240 and 480V single-phase and three phase delta. Convertible from three-phase to singlephase (in field) and vice versa (except 208/54 kW).
277V single-phase also available.
TERMINAL BLOCK
• Factory installed. Allows for easy service connection to block.
MAGNETIC CONTACTORS
• Heavy duty; UL rated 100,000 cycles.
ICOMM ™ COMPATIBLE
• Call 1.888.WATER02 for more information. Receive heater updates by text or email and monitor from any internet access point.
THREE YEAR LIMITED TANK
WARRANTY
• For complete warranty information, consult written warranty or go to statewaterheaters.com.
ECONOMY MODE OPERATION
• Control system automatically lowers the Operating
Set Point by a programmed value during userdefined time periods. Helps reduce operating costs during unoccupied or off - peak demand periods.
LINEAR SEQUENCING
• Banks of heating elements (3 elements per bank) are energized according to adjustable (1 to 20°) differential set points for each bank. First bank on is the last bank off. Helps reduce current surge and provides accurate water temperature control.
OTHER STANDARD FEATURES
• Immersion style thermostats
• Simplified circuitry, color coded for ease of service
• Hinged control compartment door for quick, easy access
• Two anode rods for maximum corrosion protection
• Cabinet has bonderized undercoat with baked enamel finish
• Top outlet, side inlet and relief valve openings
• Nipple and brass drain valve
• CSA certified and ASME rated T&P relief valve.
GOLDENROD ELEMENTS
• All DVE models ship standard with patented
Goldenrod 24K gold plated elements. Goldenrod elements provide long life with superior scaling resistance.
GLASS-LINED TANK
• Three sizes; 50, 80 and 119 gallon capacity. Tank interior is coated with glass specially developed by State for water heater use. Tanks rated at
150 psi working pressure; tested at 300 psi.
Foam insulation reduces costly heat loss. ASME
(optional) maximum working pressure is 150 psi.
POWER CIRCUIT FUSING
• Protects elements and contactors from short circuits, overloading or line surges. Meets National
Electric Code requirements (fusing required when current draw exceeds 48 amps).
© September 2015 State Water Heaters. All Rights Reserved statewaterheaters.com | 800-365-0024 Toll-Free USA | State Water Heaters | 500 Tennessee Waltz Parkway | Ashland City, TN 37015
OPTIONAL
Page 1 of 4
SCESS00608
OPTIONS:
WATER
OUTLET
MANIFOLD KITS WITH ISOLATION VALVES
• Available for multiple installations. Two heaters 9003429205. Three heaters 9003430205. Four heaters 9003431205.
INTERNATIONAL VOLTAGES
• 220, 380, 400, 415, 480, 575 and 600 volts three-phase available with Y connected elements.
3/4” NPT
OPENING
WATER
OUTLET
A C
CONDUIT
OPENING
INLET
OPENING
DRAIN
VALVE
3/4” NPT
OPENING
5.25
B
Model Number
CSB 52
CSB 80
CSB 120
Tank Capacity gal.
50
80
119 litre
189
300
450
Inches
55-3/4
60-1/4
62-1/4
A cm
142
153
158.1
Inches
21-3/4
Dimensions
B cm
55.2
25-1/2 64.8
29-1/2 75
A
Inches
27
31
35
C cm
68.6
78.7
88.9
Inlet/Outlet (NPT
Inches
1-1/4
1-1/4
1-1/4 cm
3.2
3.2
3.2
DRAIN
VALVE
© September 2015 State Water Heaters. All Rights Reserved statewaterheaters.com | 800-365-0024 Toll-Free USA | State Water Heaters | 500 Tennessee Waltz Parkway | Ashland City, TN 37015
Approx. Shipping Weight lbs
265
280
390 kG
120
127
177
INLET
OPENING
5.25
Page 2 of 4
SCESS00608
B
Standard kW Input
6
9
12
13.5
15
18
24
27
30
36
40.5
45
54
BTU/
Hour
20,478
30,717
40,956
46,075
51,195
61,434
81,912
92,151
102,390
122,868
138,226
153,585
184,302
410
1551
492
1861
328
1241
369
1396
554
2094
615
184
698
205
775
246
930
123
465
164
620
30°F
17°C
82
310
2326
738
2791
307
1163
369
1396
246
930
276
1047
418
1570
461
138
523
154
582
184
698
92
349
123
465
40°F
22°C
62
233
1745
554
2094
246
930
295
1117
197
744
221
938
332
1256
369
111
419
123
465
148
558
74
279
98
372
50°F
28°C
49
166
1398
443
1675
205
775
246
930
164
620
185
609
277
1047
307
92
349
102
388
123
465
62
223
82
310
60°F
33°C
41
155
1163
359
1396
176
665
211
798
140
532
158
509
237
897
263
79
299
88
332
105
399
53
199
70
266
70°F
39°C
35
133
997
316
1196
154
582
184
698
123
465
138
523
208
785
230
69
262
77
291
92
349
46
174
61
233
80°F
45°C
31
116
872
277
1047
137
517
164
620
109
414
123
465
185
698
205
62
233
68
258
82
310
41
155
55
207
90°F
50°C
27
103
755
246
930
102
388
123
465
82
310
92
340
138
582
154
46
174
51
194
62
233
31
116
41
155
120°F
67°C
21
78
582
185
696
112
423
134
508
90
338
101
391
151
634
168
50
190
56
211
67
254
34
127
45
169
110°F
61°C
22
85
634
20
761
123
465
148
556
98
372
111
410
166
628
184
55
209
61
233
74
279
37
140
49
186
100°F
56°C
25
93
698
221
837
88
332
105
399
70
266
79
299
119
498
132
40
150
44
166
53
199
26
100
35
133
140°F
78°C
18
66
498
158
598
95
358
113
429
76
286
85
322
128
537
142
43
161
47
149
57
215
28
107
38
143
130°F
72°C
19
72
537
170
644
© September 2015 State Water Heaters. All Rights Reserved statewaterheaters.com | 800-365-0024 Toll-Free USA | State Water Heaters | 500 Tennessee Waltz Parkway | Ashland City, TN 37015
Page 3 of 4
SCESS00608
6
27
30
18
24
9
12
13.5
15
36
40.5
45
54
kW Input
Model Numbers Tank Capacity in Gallons
50
CSB 52 6
CSB 52 9
CSB 52 12
CSB 52 13.5
CSB 52 15
CSB 52 18
CSB 52 24
CSB 52 27
CSB 52 30
CSB 52 36
CSB 52 40.5
CSB 52 45
CSB 52 54
80
CSB 80 6
CSB 80 9
CSB 80 12
CSB 80 13.5
CSB 80 15
CSB 80 18
CSB 80 24
CSB 80 27
CSB 80 30
CSB 80 36
CSB 80 40.5
CSB 80 45
CSB 80 54
119
CSB 120 6
CSB 120 9
CSB 120 12
CSB 120 13.5
CSB 120 15
CSB 120 18
CSB 120 24
CSB 120 27
CSB 120 30
CSB 120 36
CSB 120 40.5
CSB 120 45
CSB 120 54
Number of
Elements
6
6
3
3*
3
3
3
3
6
6*
9
9
9
Element
Wattage
5,000
6,000
4,000
4,500
2,000
3,000
4,000
4,500
5,000
6,000
4,500
5,000
6,000
64.9
72.1
86.5
115.4
208V
28.8
43.3
57.7
129.8
144.2
173.1
194.7
216.3
N/A
100
112.5
125
150
168.8
50
56.3
62.5
75
Full Load Current in Amperes
Single Phase
240V 277V 480V 208V
25
37.5
21.7
**32.5
12.5
18.8
16.7
25
43.3
**48.7
**54.2
65
25
28.1
31.3
37.5
33.3
37.5
41.6
50
86.6
**97.5
**108.3
130
**146.2
50
56.3
62.5
75
84.4
66.6
74.9
83.3
99.9
112.4
187.5
225
**162.5
194.9
93.8
112.5
124.9
149.9
Three Phase
240V
14.4
21.7
28.9
32.5
36.1
43.3
57.7
65
72.2
86.6
97.4
108.3
129.9
16.2
18
21.7
28.9
480V
7.2
10.8
14.4
32.5
36.1
43.3
48.7
54.1
65
SUGGESTED SPECIFICATION
The heater(s) shall be Sandblaster ® Commercial Electric Model Number_________________as manufactured by State Water Heaters or equivalent. Heater(s) shall be rated at______________kW ________V _____________phase, 60 cycle AC as listed by Underwriters’ Laboratories. All models meet National Sanitation Foundation
NSF-5 requirements. Water heater shall have LCD display with built-in diagnostic and troubleshooting information. Tank(s) shall be (50, 80 or 119) gallon capacity with
150 psi working pressure and equipped with dual extruded high density anodes. All internal surfaces of the heater(s) exposed to water shall be glass-lined with an alkaline borosilicate composition that has been fused to steel by firing at a temperature range of 1400°F to 1600°F. Electric heating elements shall be 24K Goldenrod medium watt density screw-in type with Incoloy sheath and ceramic terminal block. Internal power circuit fusing shall be provided. Element operation shall be linear sequencing through individual magnetic contactors. Control circuit shall be factory fused and include an immersion thermistor temperature probe with built in ECO control. Control cabinet and jacket shall be of baked enamel finish and shall provide full size control and element compartment for complete service and maintenance performance through front hinged compartment door, and enclose tank with foam insulation. 1 1/4” inlet and outlet connection shall be provided. The heater tank shall have a three year limited warranty and controls and accessories shall have a one year limited warranty as outlined in the written warranty. Fully illustrated instruction manual to be included. For multiple installation, factory built manifold kits for__________heater installation (maximum of 4 heaters) shall be provided. Meets or exceeds the thermal efficiency and standby loss requirements of the U.S. Department of Energy and current edition of ASHRAE/IESNA 90.1. Water heater should incorporate the iCOMM ™ system for remote monitoring, leak detection and fault alert.
DIMENSIONS AND SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE IN ACCORDANCE WITH OUR POLICY OF CONTINUOUS PRODUCT IMPROVEMENT.
© September 2015 State Water Heaters. All Rights Reserved statewaterheaters.com | 800-365-0024 Toll-Free USA | State Water Heaters | 500 Tennessee Waltz Parkway, Ashland City TN, 37015
Page 4 of 4
SCESS00608