SimpleLine
1.5, 2.5 or 3.0
Type:
Ordering
Shipping
C
H
L
Ship Complete Fixture
Ship Housing and Driver
Ship LED and Lens
Series
S15
S25
S30
Simple line LED 1.5 inch width
Simple line LED 2.5 inch width
Simple line LED 3.0 inch width
Mounting
MC5
New or Cut-in construction 5/8”
drywall or thicker
Lamping
1ML
2ML
Standard Output LED 4.9w/ft (16w/m)
High Output LED 9.8w/ft (32w/m)
Color
27
30
35
2700K, 85+ CRI
3000K, 85+ CRI
3500K, 85+ CRI
Luminous Length per Specifier
1.5”, 2.5” or 3.0”
1.5”, 2.5” or 3.0” narrow decorative lines of light
Smooth flush installation in plaster and drywall
Continuous seamless lens
Socket shadow free illumination
Zero cavity construction-no special framing required
Unit fits within the thickness of the finished wall material
LED panels are easily replaced through lens opening
5/8” New or Cut-In Construction
2.655”
(68mm)
3.0”
1.5”
2.5”
(38mm) (64mm) (76mm)
Wire Harness 1
Single
Lens
W
White
Driver
R
Remote
Start End
M
S
ST
ALxx
ARxx
AP
RHC
R4C
xx
xxFC
Mud in End
Straight End
Straight Translucent End
Angle cut Left (degrees 1° to 45°)
Angle cut Right (degrees 1° to 45°)
Arrow Point End
Half Circle Radius End
1/2” Radius Corner End
xx is distance in inch or mm
Allows housing to be field cut for exact fit
(must use H shipping option)
5/8”
(16mm)
6.625”
(168mm)
ALxx
ARxx
x
x
......................
AP
Adds .060” to end
RHC
“xx” 45° Shown length to longest side of lens
Transition
R4C
(Only if lens
changes
direction)
xx
LTxxx
RTxx
Length
......................
Adds .627” to end
x
ICxx
LTxx
Left Turn same plane (degrees 90° to 179°)
RTxx Right Turn same plane (degrees 90° to 179°)
ICxx
Inside Corner (degrees 90° to 179°)
OC90 Outside Corner (degrees 90°)
(Add Lengths & Transitions to form pattern)
Finish End
M
S
ST
ALxx
ARxx
AP
RHC
R4C
Mud in End
Straight End
Straight Translucent End
Angle cut Left (degrees 45° to 90°)
Angle cut Right (degrees 45° to 90°)
Arrow Point End
Half Circle Radius End
1/2” Radius Corner End
Units
mm
in
mm
inches
Options
CP
Chicago Plenum
OC90
Specify Power Supply on next page or Power Supplies sheet
Environmental Data
For Standard Output lamping at 3000k:
W: 4.9W/ft (16W/m)
LLD: 50,000hrs @ 70%lm
20ft (6M) on one 100w driver
For High Output lamping at 3000k:
W: 9.8W/ft (32W/m)
LLD: 50,000hrs @ 70%lm
10ft (3M) on one 100w driver
Specifications and dimensions subject to change without notice. Protected under U.S. Pat. 8109659 and other patents pending.
1002 11092014
S & ST
M
3/4”
(19mm)
Overlap
7.125”
(181mm)
x
5.625”
(143mm)
Temp range: 0° ~ 90°F (-20 ~ 30°C)
No Mercury, No UV, No Flicker
Warranty: 5 years
ETL Listed
info@dadolighting.com
v/f 877.323.6584
SimpleLine
Housing
All aluminum housing mounts just like drywall to framing and hat
channel to create a monolithic heat sink.
Housing lip is mudded into surface to provide a trimless installation.
Housing ships with 15ft CL2P cable attached to reach remote power
supply (feeds at “Start End” of run and every 20 feet in longer runs).
For longer lengths, contractor can add 50ft of 12awg wire or consult
factory.
Multiple housings tab & couple together for straightness.
Class 2 wiring from remote driver for easy installation & safety.
ETL listed, damp location, IC rated (including polyurethane insulation).
See companion spec sheets for 1/2” drywall, “dead side” and
“hardside” housings.
Various Ends for different starting and stopping conditions:
“M” when mid field
“S” when against hard stops (walls, floor, baseboard)
“ST” translucent stop, allows light to bridge across control joints
“AL” & “AR” angle cut (1° to 45°)
“AP” arrow point
“RHC” half circle radius
“R4C” 1/2” radius corners
Modifications
1.5, 2.5 or 3.0
Transitions
When lens changes directions on same plane or to a 2nd plane. (Minimum
length 3.875” or 98mm per side).
“LT” Left Turn same plane (degrees 90° to 179°); pre-assembled at factory
“RT” Right Turn same plane (degrees 90° to 179°); pre-assembled at factory
“IC” inside corner between two planes (adjusts +/- 5° in field)
“OC” outside corner around two planes; pre-assembled at factory. 90°
standard, consult factory for other angles.
LED
Low wattage white light LED produces even distribution with no shadows.
Binned within 3 MacAdam ellipses.
Blending and overlap keep color and light output uniform.
May select Standard or High Output versions when ordering. See companion
spec sheets for RGB & RGB+W color fixtures.
Optics
Light guide panel diffuses multiple LED sources.
Panel plugs into housing via DC barrel connects & is secured with clear poly
screws for quick & easy replacement.
Snap-in high transmission acrylic lens, up to 24ft per section, provides
a matte white finish & even distribution for a dimensionless appearance.
Lens fits flush with finished wall surface.
Shallow & rigid housing ensures constant lens retention along length.
Runs can be provided to the nearest 1/16” or 1mm.
Options
“FC” Field cutting option reduces lead time for perfect architectural fit
“CP” Chicago Plenum rated housing with two-position junction box for
Housings may be cut on-site up to 6” parallel to straigh or factory
mitered end. Then LED panels are made in factory to fit installed length. attachment of 1/2” conduit.
For unique custom work, such as corners and patterns, see additional
spec sheet or consult factory for shop drawings.
Driver
Remotely located power supply with 24Vdc Constant Voltage
output for simple class 2 installation.
Electronic Drivers 50/60 Hz, 120 thru 277 input.
Choice of 0-10V dimming.
Type A Sound Rating,
Non IC installations standard; consult factory for IC installation.
May be surface mounted or recessed.
Housing is die formed 16ga
CRS with White painted after fabrication finish.
Listed for 90°C conductors with 1⁄2” trade size Knock Outs.
A single 100W driver will power 20ft of low output or 10ft of high output
LED modules; additional drivers allow for infinite lengths.
Driver*
R
Drive Qty Per X
Power Supply
1, 2, 3, or x (factory determined)
(2 max. with D010 type)
Type
D010
N100
Dimming via 0-10Vdc, 100W
Non dim 100W
Voltage
UNV
Universal 120-277V
* See Power Supplies spec sheet for additional versions and details
Non-Dimming - R-1N100-UNV
REMOTE POWER SUPPLY
R-XXX-UNV SERIES
FIELD CONNECTIONS
(BY INSTALLER)
2.65”
(68mm)
10”
LINE
NEUTRAL
GRD
24VDC CLASS 2 WIRING
(100W MAX PER CIRCUIT)
INTERNAL FIXTURE WIRING
120-277 VAC
(254mm)
Remote
(+) 24V DC
N100
(-) 24V DC
Qty 1, 2 or 3
LED MODULE
IN HOUSING
LED MODULE
IN HOUSING
CL2P CABLE
(CLASS 2 PLENUM RATED, WHITE SHEATH)
13.50”
(343mm)
(POWER SUPPLY MAY BE MOUNTED ABOVE ACCESSIBLE CEILING)
Dimming - R-1DO10-UNV
12”
(305mm)
120-277 VAC
LINE
NEUTRAL
GRD
24VDC CLASS 2 WIRING
(100W MAX PER CIRCUIT)
FIELD CONNECTIONS
(BY INSTALLER)
INTERNAL FIXTURE WIRING
N100
DIMMER - D010
Qty 1 or 2
+
-
(+) 24V DC
(-) 24V DC
(-) GREY (0-10V DIM)
LED MODULE
IN HOUSING
LED MODULE
IN HOUSING
CL2P CABLE
(CLASS 2 PLENUM RATED, WHITE SHEATH)
(+) PURPLE (0-10V DIM)
11.50”
(292mm)
(POWER SUPPLY MAY BE MOUNTED ABOVE ACCESSIBLE CEILING)
0-10V CONTROL/SENSOR (BY OTHERS)
UL APPROVED (SINKING CONTROLLER)
SimpleLine
Photometric Data
BALLabs
Independent Test No. 17940.0
1.5, 2.5 or 3.0
Cat No.: S25-MC5-2ML-35-1-W-R-S-24-S-in*
Meanwell Driver No.: LPV-20-24 operating at 120v
Total Lumens: 701
* Multiply all data by .50 for 1ML lamping
Candlepower Distribution (cd)
1. Mount and Level Housing.
Cable to Remote Power Supply.
Angle
Along
45°
Across
0°
5°
10°
15°
20°
25°
30°
35°
40°
45°
50°
55°
60°
65°
70°
75°
80°
85°
90°
259
262
256
252
240
230
219
202
186
166
149
128
107
85
65
43
25
9
0
259
259
252
247
236
225
214
199
180
163
144
124
105
84
54
42
24
7
0
259
256
251
246
234
225
211
197
179
162
145
125
104
82
64
40
26
10
0
2. Install Drywall, Tape, Mud & Finish.
This is an absolute test
per LM-79-08
Luminous Length: 24”
Width: 2.5”
Zonal Lumen Summary
Zone
Lumen
0-30°
0-40°
0-60°
60-90°
90-180°
0-180°
198
322
560
139
0
699
% Luminaire
28.4%
46.1%
80.2%
19.8%
0%
100%
Luminance Data (cd/m2)
Angle
45°
55°
65°
75°
85°
Along
6017
5713
5128
4288
2729
45°
5905
5529
5065
4186
2122
Across
5868
5575
5003
3982
3032
3. Plug in LED Module & snap in lens.
SimpleLine
1.5, 2.5 or 3.0
OC90
S
IC90
Ex. Cat. #(4)
DLMIC *
(Dead
Side)
AL4 5
R T90
Ex. Cat.
#(2)
IC90
AL4 5
S
M
S33”
(StepLine)
LT33
M
AP
Ex. C
at. #(
1)
Ex .
Cat.
R T33
#(3)
RHC
DLH* (Dead Side)
Ex. Cat #s (xx denotes lengths)
Denotes the start & power feed point of each run. Can be at
either end; whichever is closest to remote power supply.
Longer runs may require additional feed points
(1) Straight Line
C-S25-MC5-1ML-30-1-W-R-M-xx-RHC-in
(2) Line from Wall to Ceiling (for sloped ceiling, covert pitch to degrees & change IC90 as needed)
C-S30-MC5-1ML-30-1-W-R-S-xx-IC90-xx-M-in
(3) Linear Pattern to Follow a Stairwell
C-S25-MC5-1ML-30-1-W-R-AP-xx-L33-xx-R33-xx-M-in
(4) Square Pattern
C-S30-MC5-2ML-35-1-W-R-LT90-xx-LT90-xx-LT90-xx-LT90-xx-LT90-mm
Notes:
• * Not all options shown are contained on this spec sheet; see website for additional widths, housing styles and colored LEDs.
• Consult factory for help with applications not shown or assistance with specifying & ordering.
• Shop drawings will be prepared for all patterns and straight runs upon request.