DAKOTA™ 2006 TURF TENDER ILLUSTRATED PARTS MANUAL Copyright 2005 Dakota Peat and Equipment, Inc. p/n 14137 1 INTRODUCTION To ensure optimum performance and safety, always purchase genuine DAKOTA replacement parts and accessories. NEVER USE “WILL-FIT” REPLACEMENT PARTS AND ACCESSORIES MADE BY OTHER MANUFACTURERS. Using either inappropriate or unapproved replacement parts and accessories may result in progressive damage to the Turf Tender and voids the warranty of the DAKOTA Turf Tender. This manual provides a listing to the parts and assemblies that are available as replacement parts. For the most part, common hardware is not listed in this manual. Be sure, however, that when replacement of hardware is necessary, to replace with the same length, diameter, and grade. The illustrations used in this Parts manual are for reference to replacement parts only. This manual is not to be used for assembly. If in need of replacement parts or in need of a replacement part not called out in this manual, contact an authorized Dakota dealer. To locate a local dealer, go to www.dakotapeat.com. TABLE OF CONTENTS Introduction .............................................................................................................................................2 Full Machine 440, 420 ............................................................................................................................3 Frame Assembly 440, 420 .......................................................................................................................4 Axle Assembly 440, 420 .........................................................................................................................5 Hopper Assembly 440, 420 .....................................................................................................................6 Drive Rollers 440, 420 ...........................................................................................................................7 Main Conveyor 440, 420 .........................................................................................................................8 Valve Assembly 440, 420 ........................................................................................................................9 Spinner Assembly 440, 420 .................................................................................................................. 10 Spinner 440, 420 ................................................................................................................................... 11 Side Conveyor Assembly 440, 420 ....................................................................................................... 12 Side Conveyor Saddle 440, 420............................................................................................................ 13 Side Conveyor Tail Roller 440, 420 ..................................................................................................... 14 Box Scraper 440, 420 ........................................................................................................................... 15 Debridger 440, 420 .............................................................................................................................. 16 Electric Front Door 440, 420 ............................................................................................................... 17 Optional Dump Door 440, 420 ............................................................................................................. 18 Control Box and Mount 440, 420 ......................................................................................................... 19 Full Machine 414, 412, 411 ................................................................................................................. 20 Frame Assembly 414, 412, 411 ............................................................................................................ 21 Axle Assembly 414, 412, 411 ............................................................................................................... 22 Hopper Assembly 414, 412, 411 .......................................................................................................... 23 Drive Rollers 414, 412, 411 ................................................................................................................. 24 Conveyor 414, 412, 411 ....................................................................................................................... 25 Spinner Assembly 414, 412, 411 .......................................................................................................... 26 Spinner 414, 412, 411 .......................................................................................................................... 27 Control Box and Mount 414, 412, 411 ................................................................................................. 28 Full Machine 410 ................................................................................................................................. 29 Frame Assembly 410 ............................................................................................................................ 30 Wheel Hub 410 .................................................................................................................................... 31 Hopper Assembly 410 .......................................................................................................................... 32 Drive Rollers 410 ................................................................................................................................. 33 Conveyor 410 ....................................................................................................................................... 34 Spinner Assembly 410 .......................................................................................................................... 35 Spinner 410 .......................................................................................................................................... 36 Hood Assembly 410 ............................................................................................................................. 37 Engine Package 410 ............................................................................................................................. 38 2 FULL MACHINE 440, 420 2 4 9 5 8 10 11 12 7 13 1 14 3 Ref. Description 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Frame Assembly Hopper Assembly Axle Assembly Spinner Assembly Side Conveyor Box Scraper Left Fender Right Fender Vibrator Valve Assy Spinner Motor Rear Shield U-Bolt Nut, Flange Head 440 p/n 420 p/n See page 4 See page 4 See page 6 See page 6 See page 5 See page 5 See page 10 See page 10 See page 12 See page 12 See page 15 See page 15 13870 14185 13871 14012 11397 11397 See page 9 See page 9 11051 11051 10936 10009 11889 12361 89D10 89D10 6 3 FRAME ASSEMBLY 440, 420 14 15 17 4 3 19 1 6 21 5 20 2 11 9 7 12 13 8 4 10 18 Ref. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 Description Main Frame Screw, Countersunk Bumper Mount Side Conveyor Rest Wear Strip Screw, Countersunk Screw, Flange Head Tow Bar Plate, Stacker Shoe Nut, Flange Head Screw, Flange Head Nut, Flange Head Hitch, Clevis Screw, Flange Head Bumper Stop Nut, Flange Head Side Conveyor Rest Jack Screw, Flange Head Valve, Lock Screw, Flange Head 440 p/n 10722 10G0812 14300 10715 11719 9G0412 35C1072 10698 11720 89D10 35C0820 89D08 12078 35C0512 14299 89D06 11395 10003 35C0816 11073 35C0436 420 p/n 14000 10G0812 11408 13165 11719 9G0412 35C1072 11407 11720 89D10 35C0620 89D06 10004 35C0512 11100 89D06 14070 10003 35C0816 11073 35C0436 AXLE ASSEMBLY 440, 420 26 1 2 5 4 7 11 3 6 24 12 25 9 17 28 13 18 10 15 14 23 16 20 19 7 21 22 12 8 17 18 27 420 brake hub and drum Ref. Description 1 2 3 4 5 6 7 8 9a 9b 10a 10b 11 12 13 440 p/n 420 p/n Axle 13469 Axle Pivot 10685 Pivot Stop 10691 Nut, Flange Head 89D08 Right Side Brake Assy 11150 Left Side Brake Assy 11149 Brake Hub Assy 13437 Idler Hub Assy 13434 Wheel 13472 Wheel 20" (Optional) 13473 Tire 11538 Tire 20" (Optional) 11384 Screw, Flange Head 35C0616 Stud, Brake Hub 13438 Stud, Idler Hub 12202 11417 11415 10691 89D08 11420 11419 12335 10050 10051 N/A 10052 N/A 35C0616 10209 10209 Ref. Description 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 Bearing, Inner Cup, Inner Cup, Outer Bearing, Outer Washer, Hardened Cotter Pin Nut, Castellated Nut, Self Centering Hub Grease Cap Grease Seal Nut, Flange Head Grease Fitting Screw, Flange Head Brake Drum Screw, Socket Head 440 p/n 420 p/n 13427 13428 13426 13425 13431 1F528 13429 12201 13430 13432 89D06 10H25 350824 N/A N/A 10205 10203 10204 10206 27E14 1F528 4D14 12201 10207 10208 89D06 10H25 350824 11416 74G0816 5 HOPPER ASSEMBLY 440, 420 2 31 1 34 20 35 5 17 3 15 7 10 6 9 4 12 13 29 23 11 22 8 24 30 18 21 14 36 16 19 25 37 28 26 33 Ref. Description 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 6 Hopper Rivnut Door Seal Screw, Hex Head Nut, Flange Head Door Track - RH Motor Door Track - LH Screw, Flange Head Panel, Door Roller Assembly Knob, Door Lock Bolt, Carrage Plate, Motor Mount Screw, Flange Head Nut, Flange Head Motor Mount Screw, Flange Head Nut, Nylock 440 p/n 420 p/n 13841 11570 13553 1C0824 89D08 13367 10201 13368 35C0516 12319 10290 10012 10C0816 13769 35C0512 89D05 10007 35C0528 59D08 13999 11570 13553 1C0824 89D08 13367 10201 13368 35C0516 12319 10290 10012 10C0816 13769 35C0512 89D05 10007 35C0528 59D08 7 32 Ref. Description 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 27 440 p/n 420 p/n Support, Motor Mount 10008 Roller Assembly 13889 Nut 10015 Adjustment Screw 10016 Nut, Jam 7D12 Bracket, Rear Shield RH 10935 Screw, Flange Head 35C0612 Nut, Flange Head 89D06 Bracket, Rear Shield LH 10934 Wiper 13575 Strip, Wiper Back 13576 Screw. Thread Rolling 84G2512 Conveyor Floor 10992 Return Wiper Assembly 14166 Shield, Conveyor Front 11019 Rivet, Pop, 10289 Belt, Main Conveyor 13589 Spring,Return Wiper 10302 10008 13889 10015 10016 7D12 N/A 35C0612 N/A N/A 11692 14092 84G2512 10265 14166 11019 10289 13588 10302 DRIVE ROLLERS 440, 420 8 REAR ROLLER 2 5 3 14 4 17 1 10 18 6 7 20 19 15 9 FRONT ROLLER 16 Ref. Description 11 13 12 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 440 p/n 420 p/n Bearing Mount 13887 Screw, Countersunk 9G0512 Plate, Bearing Mount 13768 Bearing 13255 Insert, Rear Roller 13212 Magnetic Wheel Assembly 14216 Screw, Flange Head 35C0616 Roller, Main Conveyor 13211 Roller, Main Conveyor 13211 Bearing Assembly 13035 Coupler, Drive Roller 10036 Guard, Coupler 10037 Chain, Coupler 10035 Fitting, Grease 10H25 Insert, Front Roller 13243 Insert, Front Roller 13215 Key 7J3016 Set Screw 15G606 Screw 14097 Cover 13706 13887 9G0512 13768 13255 13212 14216 35C0616 13211 13211 13035 10036 10037 10035 10H25 13243 13215 7J3016 15G606 14097 13706 7 MAIN CONVEYOR 440, 420 6 5 1 Ref. Description 1 2 3 4 5 6 8 Panel, Conveyor Floor Strip, Rub Strip, Rub Strip, Rub Rivnut Rivet 440 p/n 420 p/n 10988 10989 10990 10991 11569 10289 10027 10235 10028 10029 11569 10289 2 3 4 VALVE ASSEMBLY 440, 420 7 4 6 2 3 1 5 9 8 Ref. Description 1 2 3 4 5 6 7 8 9 10 Valve, Outlet Screw, Flange Head Valve, Center Section Plate, Extension Valve, Inlet Nut, Hex Flange Mount Hydraulic Tube Assembly Coil Valve, Flow Regulator 10 440 p/n 420 p/n 10910 35C0412 10908 11140 10909 89D04 11141 11454 12198 13729 10910 35C0412 10908 11140 10909 89D04 11141 11454 12198 13729 9 SPINNER ASSEMBLY 440, 420 18 1 11 6 4 9 3 10 8 2 7 14 22 16 19 17 20 12 5 13 21 15 Ref. Description 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 10 Spinner Chute Spinner Shaft Bypass Valve Assy, Disk White RH Assy, Disk White LH Assy, Brush Brace, Spinner Shield Shield Mount Screw, Socket Head Screw, Flange Head Screw, Flange Head Nut, Flange Head Spinner Shield Screw, Flange Head Nut, Flange Head Holder, Spinner Motor Bearing Screw, Flange Head Tube, Spinner Bearing Screw, Flange Head Plate, Filler Shield LH Plate, Filler Shield RH 440 p/n 420 p/n 13802 10020 10019 12546 12545 11645 12194 10379 73G0540 35C0412 45C616 89D04 14100 35C0512 55D05 13251 13255 35C0516 13256 35C0620 14101 10361 13802 10020 10019 12546 12545 11645 12194 10379 73G0540 35C0412 45C616 89D04 14100 35C0512 55D05 13251 13255 35C0516 13256 35C0620 14101 10361 SPINNER 440, 420 3 2 1 LEFT AND RIGHT SPINNER DISK ASSEMBLIES USE THE SAME COMPONENTS. LEFT SHOWN 5 4 Ref. Description 1 2 3 4 5 Spinner Disk Blade, Spinner Bolt, Carrage Nut, Flange Head Hub 440 p/n 420 p/n 12543 12543 12539 12539 10C0512 10C0512 55D05 55D05 13954 13954 11 SIDE CONVEYOR ASSEMBLY 440, 420 37 44 29 38 40 36 46 45 43 39 31 24 42 27 41 28 CHUTE ASSEMBLY 25 30 22 23 16 10 19 8 A 11 12 10 31 24 3 9 2 5 4 17 26 6 34 23 6 18 14 9 21 12 33 7 35 21 26 20 Ref. Description 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 12 32 15 DETAIL A 13 1 440 p/n 420 p/n Side Conveyor 14125 Nut, Belt Adjuster 10015 Take Up Bearing Assy 13035 Adjustment Screw 10016 Jam Nut 7D12 Motor Mount 10791 Rivet 10289 Screw, Thread Rolling 84G2510 Mount, Motor 14143 Motor 10668 Roller, Drive 13360 Adjustment Scrw 11277 Tail Roller Assembly 10787 Extension, Hopper 14334 Side Conveyor Mount 10787 Strip, Belt Support 14103 Pin, Clevis 2F8127 Pin, Cotter 1F416 Screw, Flange Head 35C0516 Washer 25E22 Nut, Flanged 89D08 Nut, Flanged 89D05 Screw, Flanged Head 35C0512 14130 10015 13035 10016 7D12 10791 10289 84G2510 14143 10668 13360 11277 10787 14334 10787 14159 2F8127 1F416 35C0516 25E22 89D08 89D05 35C0512 Ref. Description 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 Actuator, Electric Screw, Flange Head Motor Mount Screw, Flange Head Wiper, Side Conveyor Strip, Wiper Backer Chute Screw, Flange Head Strip, Seal - Side Strip, Seal - Retainer Cylinder Cylinder Strap, Chute Sheet, Rubber Bracket, Motor Mount Rivet Washer Bushing, Outer Bushing, Inner Bushing, Inner Screw, Flange Head Nut, Flanged Bushing, Outer 440 p/n 420 p/n 14156 35C0616 14292 35C0840 14297 14298 13974 35C0520 14335 14336 11775 10793 14007 14152 14293 10289 10381 14329 14328 14188 35C0516 89D05 14330 14156 35C0616 14292 35C0840 14301 14302 13974 35C0520 14335 14336 11775 10793 14007 14152 14293 10289 10381 14329 14328 14188 35C0516 89D05 14330 SIDE CONVEYOR SADDLE 440, 420 9 5 3 2 11 4 10 8 1 7 6 Ref. Description 1 2 3 4 5 6 7 8 9 10 11 440 p/n 420 p/n Saddle 11265 Side Plate 10799 Crossmember 10802 Hinge 10818 Hinge Pin 10816 Adjustable Shoe Angle 11721 Screw, Flange Head 35C0832 Nut, Flange Head 89D08 Grease Fitting 10H25 Snap Ring, External 5JM26 Screw, Flange Head 35C0816 11265 10799 10802 10818 10816 11721 35C0832 89D08 10H25 5JM26 35C0816 13 SIDE CONVEYOR TAIL ROLLER 440, 420 2 1 3 Ref. Description 1 2 3 14 Roller, Tail Bearing Shaft, Tail Roller 440 p/n 420 p/n 10785 10788 10786 10785 10788 10786 BOX SCRAPER 440, 420 5 1 3 4 14 13 2 24 6 26 12 23 25 9 15 17 7 11 16 18 8 19 10 Ref. Description 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 Box Clevis Pin Blade Plow Bolt Nut, Flange Head Cylinder Bolt, Flange Head Hanger Wheel And Tire Assy Swing Support Pin Pin, Hitch Clip Pin, Hitch Pin Screw, Flange Head Nut, Nylock Plate, Clamp Screw, Flange Head Wheel Mount Block, Spindle Mount Spindle Pin, Straight Nut, Capped Nut Adjuster Screw Cotter Pin Jam Nut 440 p/n 420 p/n 12498 2F8127 11651 39C0620 89D06 10986 35C0612 10954 12197 10955 10984 10301 13169 35C0860 59D08 10957 35C0524 11845 10981 10980 14J2524 47D10 10015 10978 1F0628 7D12 12498 2F8127 11651 39C0620 89D06 10986 35C0612 11656 12197 10955 10984 10301 13169 35C0860 59D08 10957 35C0524 11845 10981 10980 14J2524 47D10 10015 10978 1F0628 7D12 20 21 22 15 DEBRIDGER 440, 420 8 3 2 4 5 6 Ref. Description 1 2 3 4 5 6 7 8 16 440 p/n Tube 11002 Cylinder 11001 Cylinder 11009 Indicator 11015 Tube, Indicator Guide 11011 Pin, Clevis 2F8127 Pin, Hitch 13169 Clamp, Hose 11014 420 p/n N/A N/A N/A N/A N/A N/A N/A N/A 7 1 ELECTRIC FRONT DOOR 440, 420 4 2 8 7 3 5 1 6 Ref. Description 1 2 3 4 5 6 7 8 Control Door Actuator Bracket, Mount - RH Bracket, Mount - LH Screw, Flange Head Nut, Nylock Nut, Flanged Screw, Flange Head 440 p/n 420 p/n 11027 11393 11289 11288 35C0832 59D08 89D06 35C0616 11027 11393 11433 11432 35C0832 59D08 89D06 35C0616 17 OPTIONAL DUMP DOOR 440, 420 17 16 15 19 3 5 9 6 4 18 7 8 20 1 14 13 12 2 10 Ref. Description 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 18 11 440 p/n 420 p/n Hopper W/Dump Door 14322 Dump Door 13833 Hinge Pin 11020 Hinge Pin 11021 Grease Fitting 10H25 Snap Ring 5JM26 Cylinder Mount 10995 Screw, Flange Head 35C0616 Nut 89D06 Panel, Rear Flow Door 11477 Lock Knob 10012 Cylinder, Dump Door 11775 Pin, Clevis 2F8127 Pin, Cotter 1F416 Seal, Dump Door 11040 Strip, Seal Retainer 14327 Rivet 10289 Tube, Guide 11011 Clamp 11014 Indicator 11012 14323 11695 11020 11020 10H25 5JM26 10995 35C0616 89D06 11477 10012 11664 2F8127 1F416 12325 12324 10289 11011 11014 12287 CONTROL BOX AND MOUNT 440, 420 19 21 20 13 11 14 16 DETAIL A 15 9 7 9 8 8 8 5 6 10 A 6 4 18 3 2 1 22 17 23 12 Ref. Description 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 440 p/n 420 p/n Box, Control 13685 Plug, Cannon 11168 Plug, Cannon 11169 Clamp, Strain Relief 11154 Block, Fuse 10319 Nut 12D08 Fuse - 30 Amp 12119 Fuse - 10 Amp 11804 Circuit Breaker - 20A 11162 Controller, Brake 11157 Switch 11171 Screw, Machine 87G0816 Switch 11176 Switch 11167 Switch 11178 Switch 11170 Screw, Machine 87G0810 Screw, Machine 87G0808 Plug, Plastic 13063 Boot, Switch 11175 Boot, Switch 10192 Bracket, Control Box 14023 Mount, Control Box 12031 13685 11168 11169 11154 10319 12D08 12119 11804 11162 11157 11171 87G0816 11176 11167 11178 11170 87G0810 87G0808 13063 11175 10192 14023 12031 19 FULL MACHINE 414, 412, 411 4 3 17 13 19 14 7 15 11 18 9 12 8 6 15 5 10 20 1 2 Ref. Description 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 20 Frame Assy Axle Assy Auxillary Control Box Hopper Assy U-Bolt Nut, Flange Head Hydraulic Motor Spinner Assembly Control Box Fender Seal Screw, Thread Rolling Screw, Flange Head Bracket, Box Mount Screw, Flange Head Valve Assy Screw, Flange Head Screw, Flange Head Rear Shield Brake Control Box 414 p/n 412 p/n 411 p/n See page 21 See page 22 13846 See page 23 11889 89D10 11051 See page 26 See page 28 13870 10677 84G2510 35C0516 14094 35C0508 14043 35C0512 35C0516 10936 14304 See page 21 See page 22 13846 See page 23 12361 89D08 11051 See page 26 See page 28 14185 10677 84G2510 35C0516 14094 35C0508 14043 35C0512 35C0516 10009 14304 See page 21 See page 22 13846 See page 23 10189 89D08 10018 See page 26 See page 28 14185 10374 84G2510 35C0516 14094 35C0508 14043 35C0512 35C0516 13115 14304 FRAME ASSEMBLY 414, 412, 411 1 8 4 6 4 6 2 7 5 3 Ref. Description 1 2 3 4 5 6 7 8 9 Main Frame Bolt, Flange Head Nut, Flanged Screw, Flanged Head Tow Bar Nut, Flanged Head Hitch, Clevis Rivnut Jack, Side Swivel 9 414 p/n 412 p/n 411 p/n 13581 35C1072 89D10 35C0828 10698 55D08 12078 11569 10003 13781 35C1072 89D10 35C0620 11407 55D06 10004 N/A 10003 13891 35C1072 89D10 35C0620 11582 55D06 10004 N/A 10003 21 AXLE ASSEMBLY 414, 412, 411 12 1 26 5 2 4 A 14 7 9 6 11 24 25 3 23 13 DETAIL A 15 10 8 28 16 17 27 18 20 22 7 19 21 12 412 & 411 BRAKE HUB AND DRUM 22 Ref. Description 414 p/n 412 p/n 411 p/n 1 2 3 4 5 6 7 8 9a 9b 10a 10b 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 13469 10685 10691 899D08 11150 11149 13437 13434 13472 13473 11538 13473 35C0616 13438 12202 13427 13428 13426 13425 13431 1F528 13429 12201 13430 13432 89D06 10H25 35C0824 N/A N/A 11417 1415 10691 899D08 11420 11419 12335 10050 10051 N/A 10052 N/A 35C0616 10209 10029 10205 10203 10204 10206 27E14 1F528 4D14 12201 10207 10208 89D06 10H25 35C0824 11416 74G0816 11417 1415 10691 899D08 N/A N/A N/A 10050 10051 N/A 10052 N/A 35C0616 N/A 10029 10205 10203 10204 10206 27E14 1F528 4D14 12201 10207 10208 89D06 10H25 35C0824 11416 74G0816 Axle Axle Pivot Pivot Stop Nut, Flange Head Right Side Brake Assy Left Side Brake Assy Brake Hub Assy Idler Hub Assy Wheel Wheel 20" (Optional) Tire Tire 20" (Optional) Screw, Flange Head Stud, Brake Hub Stud, Idler Hub Bearing, Inner Cup, Inner Cup, Outer Bearing, Outer Washer, Hardened Cotter Pin Nut, Castellated Nut, Self Centering Hub, Grease Cap Grease Seal Nut, Flange Head Grease Fitting Screw, Flange Head Brake Drum Screw, Socket Head HOPPER ASSEMBLY 414, 412, 411 17 20 6 22 7 1 9 12 30 13 14 4 15 5 16 24 2 26 29 10 8 23 11 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 3 25 21 27 Ref. Description 28 414 p/n 412 p/n 411 p/n Hopper 13946 13780 13892 Jam Nut 7D12 7D12 7D12 Adjustment Screw 10016 10016 10016 Nut 89D05 89D05 89D05 Nut, Belt Adjustment 10015 10015 10015 Wiper Retainer 13504 13534 13534 Screw, Flange Head 35C0510 35C0510 35C0510 Nut, Nylock 59D08 59D08 59D08 Front Shield 11615 11615 11615 Conveyor Motor 10201 10201 10201 Screw, Flange Head 35C0824 35C0824 35C0824 Front Roller Assy 10290 10291 10291 Nut, Flanged 89D04 89D04 89D04 Seal, Backer Plate 13478 13478 13478 Seal, Front End 13479 13479 13479 18 19 Ref. Description 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 414 p/n 412 p/n 411 p/n Bolt, Carriage 10C0412 Screw 84G0410 Screw, Flanged Head 35C0512 Conveyor Pan Assy 13586 Wiper 13503 Rivnut 11570 Belt 13634 Seal, Rear Door 13553 Door Track RH 13367 Door Track LH 13368 Screw, Flange Head 35C0516 Plate, Motor Mount 13769 Panel, Door 12319 Knob, Rear Door Lock 10012 Roller Assy 13889 10C0412 84G0410 35C0512 10876 13535 11570 13587 13553 13367 13368 35C0516 13769 12319 10012 13889 10C0412 84G0410 35C0512 10876 13535 11570 13587 13553 13367 13368 35C0516 13769 12319 10012 13889 23 DRIVE ROLLERS 414, 412, 411 8 2 5 3 10 4 1 15 6 8 7 14 16 19 10 11 10 13 9 12 17 15 8 18 15 10 Ref. Description 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 24 Bearing Mount Screw, Countersunk Plate, Bearing Mount Bearing Roller Insert Magnetic Wheel Screw, Flange Head Roller, Main Conveyor Set Screw Bearing Assy Coupler, Drive Roller Guard Chain Coupler Grease Fitting Roller Insert Roller Insert Key Set Screw Screw Cover 414 p/n 412 p/n 411 p/n 13887 13887 13887 9G0512 9G0512 9G0512 13768 13768 13768 13255 13255 13255 13212 13212 13212 14216 14216 14216 35C0616 35C0616 35C0616 13211 13211 13211 15G0606 15G0606 15G0606 13035 13035 13035 10036 10036 10036 10037 10037 10037 10035 10035 10035 10H25 10H25 10H25 13243 13243 13243 13215 13215 13215 7J3016 7J3016 7J3016 15G606 15G606 15G606 14097 14097 14097 13706 13706 13706 20 CONVEYOR 414, 412, 411 2 6 4 5 3 Ref. Description 1 2 3 4 5 6 Panel, Conveyor Floor Strip, Belt Support Strip, Belt Support Strip, Belt Support Rivnut Rivet 414 p/n 412 p/n 411 p/n 13582 13583 13584 13585 11569 10289 10877 11610 10880 10879 11569 10289 1 10877 11610 10880 10879 11569 10289 25 SPINNER ASSEMBLY 414, 412, 411 1 11 6 4 9 18 3 2 10 8 7 14 22 16 19 17 20 5 12 13 21 15 Ref. Description 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 26 Spinner Chute Spinner Shaft Bypass Valve Assy, Disk White RH Assy, Disk White LH Assy, Brush Brace, Spinner Shield Shield Mount Screw, Socket Head Screw, Flange Head Screw, Flange Head Nut, Flange Head Spinner Shield Screw, Flange Head Nut, Flange Head Holder, Spinner Motor Bearing Screw, Flange Head Tube, Spinner Bearing Screw, Flange Head Plate, Filler Shield LH Plate, Filler Shield RH 414 p/n 412 p/n 411 p/n 13802 10020 10019 12546 12545 11645 12194 10379 73G0540 35C0412 45C616 89D04 14100 35C0512 55D05 13251 13255 35C0516 13256 35C0620 14101 10361 13802 10020 10019 12546 12545 11645 12194 10379 73G0540 35C0412 45C616 89D04 14100 35C0512 55D05 13251 13255 35C0516 13256 35C0620 14101 10361 13802 10020 10019 12546 12545 11645 12194 10379 73G0540 35C0412 45C616 89D04 14100 35C0512 55D05 13251 13255 35C0516 13256 35C0620 14101 10361 SPINNER 414, 412, 411 3 2 1 LEFT AND RIGHT SPINNER DISK ASSEMBLIES USE THE SAME COMPONENTS. LEFT SHOWN 5 4 Ref. Description 1 2 3 4 5 Spinner Disk Blade, Spinner Bolt, Carrage Nut, Flange Head Hub 414 p/n 412 p/n 411 p/n 12543 12543 12543 12539 12539 12539 10C0512 10C0512 10C0512 55D05 55D05 55D05 13954 13954 13954 27 CONTROL BOX AND MOUNT 414, 412, 411 4 3 2 5 1 6 Ref. Description 1 2 3 4 5 6 28 Bracket, Control Box Plate, Extension Control Box Auxiliary Control Box Brake Box And Relay Controller 414 p/n 412 p/n 411 p/n 14023 14105 14309 14113 14304 13846 14023 14105 14309 14113 14304 13846 14023 14105 14309 14113 14304 13846 FULL MACHINE 410 14 28 15 26 8 12 16 9 31 23 11 29 18 21 20 24 25 DETAIL A 27 13 3 A 5 22 29 23 11 21 10 4 20 25 2 18 9 7 6 1 30 Ref. Description 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Frame Assembly Hub, Idler Assembly Power Package Nut, Castle Hood Assembly Nut, Flanged Wheel Hopper Screw, Flange Head U-Bolt Screw, Flange Head Strip, Filler Control Box Auxillary Control Box Screw, Flange Head Bracket, Box Mount Tire Pin, Hitch Clip U-Bolt Bracket, Mount Mount, Control Box Bolt, Flange Head Screw, Flange Head Fender - Left Side Nut, Flanged Motor, Hydraulic Screw, Flange Head Fender - Right Side Front Shield Screw, Flange Head Spinner Assembly 17 19 13 410 p/n 410 (JD) p/n 410 (TORO) p/n 14305 10050 14022 4D14 13937 89D08 10051 14062 35C0412 10189 35C0612 10374 14039 13846 35C0616 14094 10052 10301 10186 14023 10317 35C0516 35C0412 13805 89D04 10018 35C0510 13806 11615 35C0848 13804 14314 N/A N/A N/A N/A 89D08 N/A 14062 35C0412 10189 35C0612 10374 14309 13846 35C0616 14094 N/A 10301 N/A 14023 10317 N/A 35C0412 13811 89D04 10018 35C0510 13812 11033 35C0848 13804 14315 N/A N/A N/A N/A 89D08 N/A 14062 35C0412 10189 35C0612 10374 14309 13846 35C0616 14094 N/A 10301 N/A 14023 10317 N/A 35C0412 13811 89D04 10018 35C0510 13812 11033 35C0848 13804 29 FRAME ASSEMBLY 410 5 7 6 1 A DETAIL A 4 2 11 8 3 9 1 10 JD 1 TORO Ref. Description 1 2 3 4 5 6 7 8 9 10 11 30 410 p/n 410 (JD) p/n 410 (TORO) p/n Frame 13772 Tow Bar 11582 Hitch, Clevis 10004 Jack, Side Swivel 10003 Bracket, Mount 11840 Nut, Speed 11841 Screw, Flange Head 35C0516 Screw, Flange Head 35C0620 Nut, Flanged 89D06 Bolt, Flange Head 35C1072 Nut, Flanged 89D10 14013 N/A N/A N/A 11840 11841 35C0516 N/A N/A N/A N/A 13815 N/A N/A N/A 11840 11841 35C0516 N/A N/A N/A N/A WHEEL HUB 410 5 6 1 8 9 4 7 3 2 Ref. Description 1 2 3 4 5 6 7 8 9 Hub Cup, Inner Bearing, Inner Seal Cup, Outer Washer Hub Cap Lug Bolt Bearing, Outer 410 p/n 410 (JD) p/n 410 (TORO) p/n 12659 10203 10205 10208 10204 27E14 10207 10209 10206 N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A 31 HOPPER ASSEMBLY 410 21 1 15 7 33 8 13 23 16 2 18 22 14 10 32 29 24 9 26 11 27 17 6 31 12 28 25 19 30 4 5 Ref. Description 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 32 Hopper Roller Assembly Screw, Flange Head Plate, Motor Mount Nut Conveyor Pan Assembly Front Roller Assembly Screw, Flange Head Nut, Belt Adjuster Adjustment Screw Nut, Jam Panel, Belly Pan Seal, Front End Plate, Seal Backer Bolt Nut, Flange Shield, Rear Cap Screw, Hex Head Wiper, Rubber Retainer, Wiper Bolt Seal, Rear Door Rivnut Track, Rear Door RH Track, Rear Door LH Bolt Knob, Rear Door Lock Motor, Conveyor Valve Assembly Screw, Flange Head Nut, Nylock Panel, Rear Flow Door Belt 20 3 410 p/n 410 (JD) p/n 410 (TORO) p/n 13709 13889 35C0512 13769 89D05 10876 13414 35C0616 10015 10016 7D12 11637 13479 13478 10C0412 89D04 10009 35C0508 13535 13534 84G0410 13553 11570 13367 13368 35C0516 10012 10201 14043 35C0824 59D08 10014 13587 13709 13889 35C0512 13769 89D05 10876 13414 35C0616 10015 10016 7D12 11637 13479 13478 10C0412 89D04 10009 35C0508 13535 13534 84G0410 13553 11570 13367 13368 35C0516 10012 10201 14043 35C0824 59D08 10014 13587 13709 13889 35C0512 13769 89D05 10876 13414 35C0616 10015 10016 7D12 11637 13479 13478 10C0412 89D04 10009 35C0508 13535 13534 84G0410 13553 11570 13367 13368 35C0516 10012 10201 14043 35C0824 59D08 10014 13587 DRIVE ROLLERS 410 8 2 5 3 4 10 1 6 15 7 18 14 8 9 16 17 15 10 Ref. Description 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 Bearing Mount Screw, Countersunk Plate, Bearing Mount Bearing Roller Insert Magnetic Wheel Screw, Flange Head Roller, Main Conveyor Set Screw Bearing Assembly Coupler, Drive Roller Guard Chain Coupler Grease Fitting Roller Insert Key Screw Cover 410 p/n 410 (JD) p/n 410 (TORO) p/n 13887 9G0512 13768 13255 13212 14216 35C0616 13211 15G0606 13035 10036 10037 10035 10H25 13243 7J3016 14097 13706 13887 9G0512 13768 13255 13212 14216 35C0616 13211 15G0606 13035 10036 10037 10035 10H25 13243 7J3016 14097 13706 13887 9G0512 13768 13255 13212 14216 35C0616 13211 15G0606 13035 10036 10037 10035 10H25 13243 7J3016 14097 13706 33 CONVEYOR 410 6 2 3 4 5 1 Ref. Description 1 2 3 4 5 6 34 Panel, Conveyor Floor Strip, Belt Support Strip, Belt Support Strip, Belt Support Rivnut Rivet 410 p/n 410 (JD) p/n 410 (TORO) p/n 13582 13583 13584 13585 11569 10289 10877 11610 10880 10879 11569 11683 10877 11610 10880 10879 11569 102891 SPINNER ASSEMBLY 410 18 1 11 6 4 10 9 8 3 7 14 22 2 16 19 17 20 12 13 5 21 15 Ref. Description 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 Spinner Chute Spinner Shaft Bypass Valve Assy, Disk White RH Assy, Disk White LH Assy, Brush Brace, Spinner Shield Shield Mount Screw, Socket Head Screw, Flange Head Screw, Flange Head Nut, Flange Head Spinner Shield Screw, Flange Head Nut, Flange Head Holder, Spinner Motor Bearing Screw, Flange Head Tube, Spinner Bearing Screw, Flange Head Plate, Filler Shield LH Plate, Filler Shield RH 410 p/n 13802 10020 10019 12546 12545 11645 12194 10379 73G0540 35C0412 45C616 89D04 14100 35C0512 55D05 13251 13255 35C0516 13256 35C0620 14101 10361 410 (JD) p/n 410 (TORO) p/n 13802 10020 10019 12546 12545 11645 12194 10379 73G0540 35C0412 45C616 89D04 14100 35C0512 55D05 13251 13255 35C0516 13256 35C0620 14101 10361 13802 10020 10019 12546 12545 11645 12194 10379 73G0540 35C0412 45C616 89D04 14100 35C0512 55D05 13251 13255 35C0516 13256 35C0620 14101 10361 35 SPINNER 410 3 2 1 LEFT AND RIGHT SPINNER DISK ASSEMBLIES USE THE SAME COMPONENTS. LEFT SHOWN 5 4 Ref. Description 1 2 3 4 5 36 410 p/n 410 (JD) p/n 410 (TORO) p/n Spinner Disk 12543 Blade, Spinner 12539 Bolt, Carrage 10C0512 Nut, Flange Head 55D05 Hub 13954 12543 12539 10C0512 55D05 13954 12543 12539 10C0512 55D05 13954 HOOD ASSEMBLY 410 7 8 A 3 6 5 DETAIL A 2 4 1 Ref. Description 1 2 3 4 5 6 7 8 Hood Cam, Hood Hood Latch Spring, Extension Snap Ring Snap Ring Bumper, Rubber Spring, Extension 410 p/n 410 (JD) p/n 410 (TORO) p/n 13936 12063 12065 12072 12069 12070 12068 7D05 13936 12063 12065 12072 12069 12070 12068 7D05 13936 12063 12065 12072 12069 12070 12068 7D05 37 ENGINE PACKAGE 410 14 15 12 18 19 13 1 7 3 20 8 4 2 A 21 16 11 10 6 17 9 Ref. Description 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 38 Honda Engine Nut Washer, Lock Screw, Flange Head Bolt Nut Bolt Mount, Pump Screw, Flange Head Nut Engine Frame Coupler, Half Screw, Flange Head Insert Hydraulic Tank Plug, End Cap Bracket, Battery Box Coupler Box, Battery Pump Rectifier 5 410 p/n 410 (JD) p/n 410 (TORO) p/n 11729 89D05 26E06 35C0420 35C0540 89D06 1C0620 10202 35C0532 83D04 11728 11731 35C0620 10590 11669 11730 11621 10589 11661 11673 11944 11729 89D05 26E06 35C0420 35C0540 89D06 1C0620 10202 35C0532 83D04 11728 11731 35C0620 10590 11669 11730 11621 10589 11661 11673 11944 11729 89D05 26E06 35C0420 35C0540 89D06 1C0620 10202 35C0532 83D04 11728 11731 35C0620 10590 11669 11730 11621 10589 11661 11673 11944 DETAIL A WARRANTY DAKOTA PEAT & EQUIPMENT is hereinafter called DAKOTA™. (A) Warranty. DAKOTA™ warrants all products manufactured by it to be free from defects in material and manufactured at the time of shipment and for twelve (12) months from date of delivery to customer. DAKOTA™ will furnish to the dealer, without charge, f.o.b. East Grand Forks, Minnesota, replacements for such parts as DAKOTA™ finds to have been defective at the time of shipment; or at DAKOTA™’s option, will make or authorize repairs to such parts, provided that, upon request, such parts are returned, transportation prepaid, to the factory at East Grand Forks, Minnesota. This warranty shall not apply to any product that has been subjected to misuse, misapplication, neglect (including but not limited to improper maintenance), accident, improper installation, modification (including but not limited to use of unauthorized parts or attachments), adjustment, or repair. Engines, motors, and any accessories furnished with DAKOTA™’s products, but which are not manufactured by DAKOTA™, are not warranted by DAKOTA™ but are sold only with the express warranty, if any, of the manufacturers thereof. THE FOREGOING IS IN LIEU OF ALL OTHER WARRANTIES, WHETHER EXPRESS OR IMPLIED (INCLUDING THOSE OF MERCHANTABILITY AND FITNESS OF ANY PRODUCT FOR A PARTICULAR PURPOSE), AND OF ANY OTHER OBLIGATION OF LIABILITY ON THE PART OF DAKOTA. (B) Limitation of Liability. It is expressly understood that DAKOTA™’s liability for its products, whether due to breach of warranty, negligence, strict liability, or otherwise, is limited to the furnishing of such replacement parts, and DAKOTA™ will not be liable for any other injury, loss, damage, or expense, whether direct or consequential, including but not limited to loss of use, income, profit, or production, or increased cost of operation, or spoilage of or damage to material, arising in connection with the sale, installation, use, or inability to use, or the repair or replacement of, DAKOTA™’s products. Any operation expressly prohibited in the operating instructions or manuals furnished with the machine, or any adjustment, or assembly procedure not recommended or authorized in the operating or service instructions shall void such warranty. (C) Registration. THIS WARRANTY IS VOID UNLESS YOUR DEALER COMPLETED AND RETURNED A “NEW PRODUCT REGISTRATION AND WARRANTY” CARD TO DAKOTA™ WITHIN 30 DAYS AFTER DELIVERY OF UNIT TO CUSTOMER. No Parts shall be returned under warranty unless a Return Goods Authorization (RGA) is obtained from DAKOTA™. ALWAYS GIVE PART NAME, NUMBER AND MACHINE SERIAL NUMBER WHEN ORDERING PARTS. NOTE: DAKOTA reserves the right to make changes to design or construction without obligation to incorporate such changes in equipment previously sold. The tire manufacturer’s warranty supplied with your Turf Tender may not apply outside the U.S. YOUR DEALER IS RESPONSIBLE FOR COMPLETION OF THE PRODUCT REGISTRATION CARD AND RETURNING IT TO DAKOTA AS SOON AS YOU TAKE DELIVERY OF YOUR TURF TENDER. D) Parts, Service, and Warranty Contact your local dealer for parts, service, and warranty. ion t a str n 30 i g re ithi e th in w f i ed sent i n de not e l b rd is l i w ca . y t n anty very a r r arr li a e d W w er and s aft day 39 NOTES 40