4Post™
Commercial and GSA Price
Book and Specification Guide
Version 5.0
Effective February 1, 2012
4Post™ Shelving General Information & Specifications
Letter
Media: Size
2-2 1/2
pounds
per filin
g inch
GENERAL INFORMATION
Legal Si
ze M
2 1/2 -3 edia:
po
per filin unds
g inch
Product Description: Datum Standard, Heavy, and Heavy Duty Plus Shelving offers exceptional
strength and durability for a variety of storage applications. ­4Post shelving incorporates both “L” &
“T” shaped uprights allowing for a variety of shelving configurations. Interlocking keyhole uprights­­ ­combined with double
rivet shelf supports are designed to offer maximum strength and durability with exceptional versatility. All shelf units are
­assembled without the use of nuts, bolts, or clips and are available for both single entry (wall unit) and double entry (back
to back storage) allowing for maximum filing/storage capacity with minimal floor intrusion. Shelves are available slotted
to accept adjustable file dividers. All shelf units are designed for expansion and are available as mobile ready for easy
conversion to Datum TrakSlider Systems. Datum 4Post Shelving is ready to assemble with no special tools required. Available
depths make it an ideal choice for letter, legal, binder, and book storage applications.
SPECIFICATIONS
Open Uprights: Are 18 gauge cold rolled steel, roll formed into a 2" wide “T” upright with keyhole slot holes punched on
1-1/2" centers on inner wall of upright only. There are no holes on the exterior portion of the upright. Front and rear posts
are joined together with a minimum of three 3" high 18 gauge spacers maintaining proper upright spacing along the entire
length of the upright and adds rigidity and strength. The open “L” upright is ­typically used for row ends with Open “T”
uprights used as a common upright between shelf units. All uprights include an identifiable pair of punched holes every 6"
on center allowing a visual confirmation for proper shelf spacing.
Closed Uprights: Includes same specifications as the Open Uprights except welded spacers are replaced with a welded 24
gauge full height closure sheet incorporating a 5/8" wide stiffener flange at the bottom of the closure sheet.
Standard Duty Shelves: Shelves are formed of 22 gauge cold rolled steel with a 3/4" flange on all sides. Front and Back
shelf sides to include a 9/32" stiffener flange for added strength. Shelves are available plain or with slots punched on 2"
centers to accept adjustable file dividers.
Heavy Duty Shelves: Include same specification as Standard Duty Shelving except shelves are formed of 18 gauge cold
rolled steel.
Heavy Duty Plus Shelves: Include the same specification as Heavy Duty Shelving, except shelves include a 1-1/8" flange
on all sides.
TrakSlider Standard Duty Tops: Tops are formed of 22 gauge cold rolled steel with a 3/4" flange on all sides. Front and
Back top sides to include a 9/32" stiffener flange for added strength. All tops are prepunched with knock-outs to accept
TrakSlider overhead anti-tip mounting hardware.
Shelf Support: Shelf supports are formed of 14 gauge (11 gauge for 42" and 48" widths) hot rolled pickled steel 3/4" high.
Each ­support end is formed flat and includes two shoulder rivets with 7/16" diameter heads for attachment to corresponding
keyholes in upright. Shelf supports are ­available with single or double rivets. All single rivet shelf supports are designed
to sit flush with bottom of shelf upright and are prepunched to align with holes on Datum TrakSlider carriages for easy
attachment.
Shelf Reinforcement: Shelf reinforcements are formed of 13 gauge hot rolled, pickled steel and formed into a channel
shape. Shelf ­reinforcements are notched on each end and align with respective shelf support.
Back Stops: Back stops are formed of 18 gauge cold rolled steel with a 7/16" channel at the top and similar bend at the
bottom and are slotted on the face. Slots on Back stops are punched on same centers as the shelf and are used to accept
back tab of adjustable file divider. Ends of Back stop include one shoulder rivet with 7/16" diameter head for attachment to
corresponding keyholes in upright. Back stops are used for single entry shelving only.
Center Stops: Center stops are formed of 20 gauge cold rolled steel with a 9/16" formed channel on the top and a 9/16"
return bend on the bottom. Formed channels on the top are punched on same centers as the shelf and are used for back to
back support of adjustable divider. The overall height of center stop is 4" and includes mounting holes on bottom flange for
easy assembly using 1/4" nuts and bolts. Center stops are used for double entry shelving only.
Kick Plate: Kick Plates are formed of 14 or 16 gauge cold rolled steel formed with a stiffener flange on top and bottom
edge. Kick Plates are available in 2" and 4" heights.
Adjustable File Dividers: File dividers are formed from 20 gauge cold rolled steel. Dividers are punched to include two
tabs on the base and one ­located on the rear. File dividers can only be used with Back or Center stops.
Sectional Backs: Sectional backs are formed of 20 gauge cold rolled steel, positioned on the inner rear post, and are
securely held in place by a formed retainer flange positioned between the shelf support and post. Each back section will
include a formed channel on the top and bottom and include punched holes for joining sections together.
Backs of 40" high are one-piece, 64" high are two-piece, and up to 97" are of three-piece construction.
Sectional back panels will add 3/8" to overall depth of shelving.
Pull Out Reference Shelves: Pull out reference shelves shall be formed of 20 gauge cold rolled steel
and attach to underside of shelf supports. Pull out reference shelves operate on full extension ball bearing
suspensions and are available to mount on single or double entry shelving.
Finish: All steel parts are thoroughly cleaned using a three-stage iron phosphate washer and then coated with an EpoxyHybrid powder coat finish using a state-of-the-art electrostatic paint system. Powder coating is more environmentally friendly
than liquid paint and provides a durable uniform finish that is scratch and corrosion resistant.
FOR ADDITIONAL INFORMATION ON ORDERING, TERMS AND CONDITIONS,
PRICING AND SHIPPING, REFER TO PAGE i.
TEL: 800-828-8018
www.datumfiling.com • sales@datumfiling.com
1
EFFECTIVE FEBRUARY 1, 2012
Prices and specifications subject to change without notice.
Preconfigured 64-1/4" High, 22 Gauge
Letter
Media: Size
2-2 1/2
pounds
per filin
g inch
ALL PRECONFIGURED UNITS DO NOT INCLUDE DIVIDERS. PLEASE REFER TO
PAGE 44 FOR DIVIDER INFORMATION.
All shelves are placed on 10-1/2" centers for 9-3/4" clear vertical height. Shelf supports are adjustable on 1-1/2"
centers. The following units are only available as Mobile Ready Shelving (see “For Mobile Ready Shelving” notes
below). Utilizing reference shelves on the following units will result in the loss of clear vertical height within one
shelf opening.
7 Shelves,
6 Openings
STARTER
L
E
T
T
E
R
L
E
G
A
L
Item #
D
W
H
641224-S6M
641230-S6M
641236-S6M
641242-S6M
641248-S6M
642424-S6M*
642430-S6M*
642436-S6M*
642442-S6M**
642448-S6M**
641524-S6M
641530-S6M
641536-S6M
641542-S6M
641548-S6M
643024-S6M**
643030-S6M**
643036-S6M**
643042-S6M**
643048-S6M**
12”
12”
12”
12”
12”
24”
24”
24”
24”
24”
15”
15”
15”
15”
15”
30”
30”
30”
30”
30”
24”
30”
36”
42”
48”
24”
30”
36”
42”
48”
24”
30”
36”
42”
48”
24”
30”
36”
42”
48”
64-1/4”
64-1/4”
64-1/4”
64-1/4”
64-1/4”
64-1/4”
64-1/4”
64-1/4”
64-1/4”
64-1/4”
64-1/4”
64-1/4”
64-1/4”
64-1/4”
64-1/4”
64-1/4”
64-1/4”
64-1/4”
64-1/4”
64-1/4”
6 Shelves,
5 Openings
L
E
G
A
L
Est.
Lbs.
67
78
91
114
130
117
130
145
184
204
79
90
103
127
141
141
161
183
203
242
List
Price
382.30
387.80
394.10
462.70
500.50
555.90
562.20
572.70
692.10
752.50
434.60
442.50
449.80
517.30
563.00
671.90
679.20
688.60
803.90
871.20
ADDER
Starter
Adder
Item #
D
W
H
641224-A6M
641230-A6M
641236-A6M
641242-A6M
641248-A6M
642424-A6M*
642430-A6M*
642436-A6M*
642442-A6M**
642448-A6M**
641524-A6M
641530-A6M
641536-A6M
641542-A6M
641548-A6M
643024-A6M**
643030-A6M**
643036-A6M**
643042-A6M**
643048-A6M**
12”
12”
12”
12”
12”
24”
24”
24”
24”
24”
15”
15”
15”
15”
15”
30”
30”
30”
30”
30”
24”
30”
36”
42”
48”
24”
30”
36”
42”
48”
24”
30”
36”
42”
48”
24”
30”
36”
42”
48”
64-1/4”
64-1/4”
64-1/4”
64-1/4”
64-1/4”
64-1/4”
64-1/4”
64-1/4”
64-1/4”
64-1/4”
64-1/4”
64-1/4”
64-1/4”
64-1/4”
64-1/4”
64-1/4”
64-1/4”
64-1/4”
64-1/4”
64-1/4”
Est.
Lbs.
56
66
78
101
117
95
108
123
162
182
63
74
87
112
125
118
137
158
178
207
List
Price
314.60
319.90
326.20
394.60
432.60
454.00
460.50
471.00
590.40
650.90
356.30
363.80
371.10
438.70
484.60
544.20
551.50
561.20
676.00
743.40
All shelves are placed on 12" centers for 11-1/4" clear vertical height. Shelf supports are adjustable on 1-1/2"
centers. When ordering ­reference shelves for the following units, Mobile Ready Shelving must be ordered. Not
specifying Mobile Ready Shelving will result in loss of clear vertical height within one shelf opening.
STARTER
L
E
T
T
E
R
Legal Si
ze M
2 1/2 -3 edia:
po
per filin unds
g inch
Item #
D
W
H
641224-S5
641230-S5
641236-S5
641242-S5
641248-S5
642424-S5*
642430-S5*
642436-S5*
642442-S5**
642448-S5**
641524-S5
641530-S5
641536-S5
641542-S5
641548-S5
643024-S5**
643030-S5**
643036-S5**
643042-S5**
643048-S5**
12”
12”
12”
12”
12”
24”
24”
24”
24”
24”
15”
15”
15”
15”
15”
30”
30”
30”
30”
30”
24”
30”
36”
42”
48”
24”
30”
36”
42”
48”
24”
30”
36”
42”
48”
24”
30”
36”
42”
48”
64-1/4”
64-1/4”
64-1/4”
64-1/4”
64-1/4”
64-1/4”
64-1/4”
64-1/4”
64-1/4”
64-1/4”
64-1/4”
64-1/4”
64-1/4”
64-1/4”
64-1/4”
64-1/4”
64-1/4”
64-1/4”
64-1/4”
64-1/4”
Est.
Lbs.
61
70
81
103
115
106
117
130
162
183
72
81
92
114
127
132
145
160
183
208
ADDER
List Price
Item #
D
W
H
352.20
356.90
362.80
422.00
455.10
506.70
512.50
522.40
625.00
677.60
398.80
405.50
412.30
470.60
510.70
610.40
617.20
625.90
724.80
783.20
641224-A5
641230-A5
641236-A5
641242-A5
641248-A5
642424-A5*
642430-A5*
642436-A5*
642442-A5**
642488-A5**
641524-A5
641530-A5
641536-A5
641542-A5
641548-A5
643024-A5**
643030-A5**
643036-A5**
643042-A5**
643048-A5**
12”
12”
12”
12”
12”
24”
24”
24”
24”
24”
15”
15”
15”
15”
15”
30”
30”
30”
30”
30”
24”
30”
36”
42”
48”
24”
30”
36”
42”
48”
24”
30”
36”
42”
48”
24”
30”
36”
42”
48”
64-1/4”
64-1/4”
64-1/4”
64-1/4”
64-1/4”
64-1/4”
64-1/4”
64-1/4”
64-1/4”
64-1/4”
64-1/4”
64-1/4”
64-1/4”
64-1/4”
64-1/4”
64-1/4”
64-1/4”
64-1/4”
64-1/4”
64-1/4”
Starter
Adder
TEL: 800-828-8018
List
Price
284.10
289.00
294.80
354.30
387.20
405.10
410.90
420.60
523.40
575.90
320.10
327.00
333.60
392.10
432.00
482.60
489.40
498.10
597.30
655.50
FOR MOBILE READY SHELVING
Add “M” to the end of the model number when ordering mobile ready shelving. For
example: 641224-A5M
Single rivet shelf supports replace front Kick Plate and standard support on bottom shelf
allowing for easy attachment to mobile carriages.
Holes are prepunched into single rivet support to match up with corresponding holes on
Datum TrakSlider carriages.
When ordering mobile ready shelving to be used in conjunction with Datum TrakSlider
Systems please refer to page 65 for additional hardware needs.
All units ship knocked down and bulk packed.
**Includes one shelf reinforcement per shelf.
**Includes two shelf reinforcements per shelf.
Shelf reinforcements are not included for top shelf.
Top shelves are unslotted and include prepunched knockout holes for TrakSlider hardware attachment.
All starter units include 2 closed “L” uprights and all adder units include 1 open “T” upright.
All units include 64-1/4" high uprights, and 2" high front base.
Shelves are 22 gauge designed for record storage. 18 gauge shelves are available, contact factory for
more information.
www.datumfiling.com • sales@datumfiling.com
Est.
Lbs.
42
57
74
90
104
84
95
108
140
161
56
65
76
99
111
111
122
135
157
182
2
EFFECTIVE FEBRUARY 1, 2012
Prices and specifications subject to change without notice.
Preconfigured 64-1/4" High, 22 Gauge
Letter
Media: Size
2-2 1/2
pounds
per filin
g inch
ALL PRECONFIGURED UNITS DO NOT INCLUDE DIVIDERS. PLEASE REFER TO PAGE 44
FOR DIVIDER INFORMATION.
All shelves are placed on 13-1/2" centers for 12-3/4" clear vertical height. Shelf supports are
adjustable on 1-1/2" centers.
5 Shelves, 4 Openings
STARTER
L
E
T
T
E
R
L
E
G
A
L
Legal Si
ze M
2 1/2 -3 edia:
po
per filin unds
g inch
Item #
D
W
H
641224-S4
641230-S4
641236-S4
641242-S4
641248-S4
642424-S4*
642430-S4*
642436-S4*
642442-S4**
642448-S4**
641524-S4
641530-S4
641536-S4
641542-S4
641548-S4
643024-S4**
643030-S4**
643036-S4**
643042-S4**
643048-S4**
12”
12”
12”
12”
12”
24”
24”
24”
24”
24”
15”
15”
15”
15”
15”
30”
30”
30”
30”
30”
24”
30”
36”
42”
48”
24”
30”
36”
42”
48”
24”
30”
36”
42”
48”
24”
30”
36”
42”
48”
64-1/4”
64-1/4”
64-1/4”
64-1/4”
64-1/4”
64-1/4”
64-1/4”
64-1/4”
64-1/4”
64-1/4”
64-1/4”
64-1/4”
64-1/4”
64-1/4”
64-1/4”
64-1/4”
64-1/4”
64-1/4”
64-1/4”
64-1/4”
Est.
Lbs.
56
63
71
90
101
95
105
115
141
162
65
73
81
100
112
118
129
141
158
182
List
Price
314.00
318.20
322.90
373.10
400.10
449.00
453.20
461.80
546.90
593.90
355.10
360.70
366.60
415.00
448.40
534.60
540.60
548.10
634.70
683.20
ADDER
Starter
Starter
Adder
Item #
D
W
H
641224-A4
641230-A4
641236-A4
641242-A4
641248-A4
642424-A4*
642430-A4*
642436-A4*
642442-A4**
642448-A4**
641524-A4
641530-A4
641536-A4
641542-A4
641548-A4
643024-A4**
643030-A4**
643036-A4**
643042-A4**
643048-A4**
12”
12”
12”
12”
12”
24”
24”
24”
24”
24”
15”
15”
15”
15”
15”
30”
30”
30”
30”
30”
24”
30”
36”
42”
48”
24”
30”
36”
42”
48”
24”
30”
36”
42”
48”
24”
30”
36”
42”
48”
64-1/4”
64-1/4”
64-1/4”
64-1/4”
64-1/4”
64-1/4”
64-1/4”
64-1/4”
64-1/4”
64-1/4”
64-1/4”
64-1/4”
64-1/4”
64-1/4”
64-1/4”
64-1/4”
64-1/4”
64-1/4”
64-1/4”
64-1/4”
Est.
Lbs.
37
50
64
77
90
73
83
93
119
140
49
57
65
85
96
97
106
116
132
156
List
Price
246.30
250.30
255.20
305.00
332.10
347.30
351.30
360.30
445.20
492.20
276.50
282.30
287.90
336.60
369.70
407.00
413.10
420.30
507.00
555.80
Adder
All units ship knocked down and bulk packed.
**Includes one shelf reinforcement per shelf.
**Includes two shelf reinforcements per shelf.
Shelf reinforcements are not included for top shelf.
Top shelves are unslotted and include prepunched knockout holes for TrakSlider hardware attachment.
All starter units include 2 closed “L” uprights and all adder units include 1 open “T” upright.
All units include 64-1/4" high uprights, and 2" high front base.
Shelves are 22 gauge designed for record storage. 18 gauge shelves are available, contact
factory for more information.
TEL: 800-828-8018
www.datumfiling.com • sales@datumfiling.com
FOR MOBILE READY SHELVING
Add “M” to the end of the model number when ordering mobile ready shelving. For example:
641224-A5M
Single rivet shelf supports replace front Kick Plate and standard support on bottom shelf allowing
for easy attachment to mobile carriages.
Holes are prepunched into single rivet support to match up with corresponding holes on Datum
TrakSlider carriages.
When ordering mobile ready shelving to be used in conjunction with Datum TrakSlider Systems
please refer to page 65 for additional hardware needs.
3
EFFECTIVE FEBRUARY 1, 2012
Prices and specifications subject to change without notice.
Preconfigured 76-1/4" High, 22 Gauge
Letter
Media: Size
2-2 1/2
pounds
per filin
g inch
ALL PRECONFIGURED UNITS DO NOT INCLUDE DIVIDERS. PLEASE REFER TO
PAGE 44 FOR DIVIDER INFORMATION.
8 Shelves,
7 Openings
All shelves are placed on 10-1/2" centers for 9-3/4" clear vertical height. Shelf supports are adjustable on 1-1/2"
centers. When ordering ­reference shelves for the following units, Mobile Ready Shelving must be ordered. Not
specifying Mobile Ready Shelving will result in loss of clear vertical height within one shelf opening.
STARTER
L
E
T
T
E
R
L
E
G
A
L
Item #
D
W
H
761224-S7
761230-S7
761236-S7
761242-S7
761248-S7
762424-S7*
762430-S7*
762436-S7*
762442-S7**
762448-S7**
761524-S7
761530-S7
761536-S7
761542-S7
761548-S7
763024-S7**
763030-S7**
763036-S7**
763042-S7**
763048-S7**
12”
12”
12”
12”
12”
24”
24”
24”
24”
24”
15”
15”
15”
15”
15”
30”
30”
30”
30”
30”
24”
30”
36”
42”
48”
24”
30”
36”
42”
48”
24”
30”
36”
42”
48”
24”
30”
36”
42”
48”
76-1/4”
76-1/4”
76-1/4”
76-1/4”
76-1/4”
76-1/4”
76-1/4”
76-1/4”
76-1/4”
76-1/4”
76-1/4”
76-1/4”
76-1/4”
76-1/4”
76-1/4”
76-1/4”
76-1/4”
76-1/4”
76-1/4”
76-1/4”
7 Shelves, 6 Openings
Est.
List
Lbs. Price
75
433.30
90
440.50
107 447.80
139 527.20
158 571.20
135 646.00
153 655.10
173 667.70
218 806.50
248 877.00
84
491.10
101 500.60
120 509.50
153 587.30
171 640.60
171 779.00
191 789.50
213 800.70
249 934.80
283 1,013.40
ADDER
Starter
Adder
L
E
G
A
L
Item #
D
W
H
761224-A7
761230-A7
761236-A7
761242-A7
761248-A7
762424-A7*
762430-A7*
762436-A7*
762442-A7**
762448-A7**
761524-A7
761530-A7
761536-A7
761542-A7
761548-A7
763024-A7**
763030-A7**
763036-A7**
763042-A7**
763048-A7**
12”
12”
12”
12”
12”
24”
24”
24”
24”
24”
15”
15”
15”
15”
15”
30”
30”
30”
30”
30”
24”
30”
36”
42”
48”
24”
30”
36”
42”
48”
24”
30”
36”
42”
48”
24”
30”
36”
42”
48”
76-1/4”
76-1/4”
76-1/4”
76-1/4”
76-1/4”
76-1/4”
76-1/4”
76-1/4”
76-1/4”
76-1/4”
76-1/4”
76-1/4”
76-1/4”
76-1/4”
76-1/4”
76-1/4”
76-1/4”
76-1/4”
76-1/4”
76-1/4”
ADDER
Item #
D
W
H
761224-S6
761230-S6
761236-S6
761242-S6
761248-S6
762424-S6*
762430-S6*
762436-S6*
762442-S6**
762448-S6**
761524-S6
761530-S6
761536-S6
761542-S6
761548-S6
763024-S6**
763030-S6**
763036-S6**
763042-S6**
763048-S6**
12”
12”
12”
12”
12”
24”
24”
24”
24”
24”
15”
15”
15”
15”
15”
30”
30”
30”
30”
30”
24”
30”
36”
42”
48”
24”
30”
36”
42”
48”
24”
30”
36”
42”
48”
24”
30”
36”
42”
48”
76-1/4”
76-1/4”
76-1/4”
76-1/4”
76-1/4”
76-1/4”
76-1/4”
76-1/4”
76-1/4”
76-1/4”
76-1/4”
76-1/4”
76-1/4”
76-1/4”
76-1/4”
76-1/4”
76-1/4”
76-1/4”
76-1/4”
76-1/4”
Est.
Lbs.
61
75
91
123
143
109
126
145
190
220
70
84
100
133
151
136
157
180
216
250
List
Price
363.40
370.70
378.00
457.30
501.30
532.80
542.00
554.60
693.30
763.90
411.00
420.90
429.50
507.40
560.50
637.90
648.50
659.70
793.80
872.20
All shelves are placed on 12" centers for 11-1/4" clear vertical height. Shelf supports are adjustable on 1-1/2" centers.
STARTER
L
E
T
T
E
R
Legal Si
ze M
2 1/2 -3 edia:
po
per filin unds
g inch
Est.
Lbs.
70
83
98
126
143
123
139
157
197
223
77
93
111
139
155
155
173
193
225
255
List
Price
395.30
401.60
408.20
477.50
516.20
588.30
596.50
607.20
728.30
790.10
447.30
456.00
463.60
531.80
578.30
709.00
718.20
727.90
844.50
913.30
Starter
Adder
TEL: 800-828-8018
D
W
H
761224-A6
761230-A6
761236-A6
761242-A6
761248-A6
762424-A6*
762430-A6*
762436-A6*
762442-A6**
762448-A6**
761524-A6
761530-A6
761536-A6
761542-A6
761548-A6
763024-A6**
763030-A6**
763036-A6**
763042-A6**
763048-A6**
12”
12”
12”
12”
12”
24”
24”
24”
24”
24”
15”
15”
15”
15”
15”
30”
30”
30”
30”
30”
24”
30”
36”
42”
48”
24”
30”
36”
42”
48”
24”
30”
36”
42”
48”
24”
30”
36”
42”
48”
76-1/4”
76-1/4”
76-1/4”
76-1/4”
76-1/4”
76-1/4”
76-1/4”
76-1/4”
76-1/4”
76-1/4”
76-1/4”
76-1/4”
76-1/4”
76-1/4”
76-1/4”
76-1/4”
76-1/4”
76-1/4”
76-1/4”
76-1/4”
Est.
Lbs.
54
67
82
110
128
95
111
129
169
195
64
76
90
119
135
121
139
159
191
221
List
Price
325.50
331.90
338.30
407.60
446.30
475.00
483.30
494.00
615.10
677.00
367.40
376.10
383.70
452.00
498.40
567.80
577.20
587.00
703.70
772.40
FOR MOBILE READY SHELVING
Add “M” to the end of the model number when ordering mobile ready shelving. For
example: 761224-A6M
Single rivet shelf supports replace front Kick Plate and standard support on bottom shelf
allowing for easy attachment to mobile carriages.
Holes are prepunched into single rivet support to match up with corresponding holes on
Datum TrakSlider carriages.
When ordering mobile ready shelving to be used in conjunction with Datum TrakSlider
Systems please refer to page 65 for additional hardware needs.
All units ship knocked down and bulk packed.
**Includes one shelf reinforcement per shelf.
**Includes two shelf reinforcements per shelf.
Shelf reinforcements are not included for top shelf.
Top shelves are unslotted and include prepunched knockout holes for TrakSlider hardware attachment.
All starter units include 2 closed “L” uprights and all adder units include 1 open “T” upright.
All units include 76-1/4" high uprights, and 2" high front base.
Shelves are 22 gauge designed for record storage. 18 gauge shelves are available, contact factory for
more information.
www.datumfiling.com • sales@datumfiling.com
Item #
4
EFFECTIVE FEBRUARY 1, 2012
Prices and specifications subject to change without notice.
Preconfigured 76-1/4" High, 22 Gauge
Letter
Media: Size
2-2 1/2
pounds
per filin
g inch
ALL PRECONFIGURED UNITS DO NOT INCLUDE DIVIDERS. PLEASE REFER TO PAGE 44
FOR DIVIDER INFORMATION.
6 Shelves, 5 Openings
All shelves are placed on 13-1/2" centers for 12-3/4" clear vertical height. Shelf supports are adjustable on
1-1/2" centers.
STARTER
L
E
T
T
E
R
L
E
G
A
L
Legal Si
ze M
2 1/2 -3 edia:
po
per filin unds
g inch
Item #
D
W
H
761224-S5
761230-S5
761236-S5
761242-S5
761248-S5
762424-S5*
762430-S5*
762436-S5*
762442-S5**
762448-S5**
761524-S5
761530-S5
761536-S5
761542-S5
761548-S5
763024-S5**
763030-S5**
763036-S5**
763042-S5**
763048-S5**
12”
12”
12”
12”
12”
24”
24”
24”
24”
24”
15”
15”
15”
15”
15”
30”
30”
30”
30”
30”
24”
30”
36”
42”
48”
24”
30”
36”
42”
48”
24”
30”
36”
42”
48”
24”
30”
36”
42”
48”
76-1/4”
76-1/4”
76-1/4”
76-1/4”
76-1/4”
76-1/4”
76-1/4”
76-1/4”
76-1/4”
76-1/4”
76-1/4”
76-1/4”
76-1/4”
76-1/4”
76-1/4”
76-1/4”
76-1/4”
76-1/4”
76-1/4”
76-1/4”
Est.
Lbs.
65
76
88
113
129
112
127
142
176
202
70
85
100
125
140
141
157
174
200
229
List
Price
357.40
363.00
368.40
428.30
461.10
530.70
537.10
547.10
650.10
706.50
403.70
411.10
417.60
476.20
516.20
633.20
641.80
650.10
754.50
813.50
ADDER
Starter
Starter
Adder
Item #
D
W
H
761224-A5
761230-A5
761236-A5
761242-A5
761248-A5
762424-A5*
762430-A5*
762436-A5*
762442-A5**
762448-A5**
761524-A5
761530-A5
761536-A5
761542-A5
761548-A5
763024-A5**
763030-A5**
763036-A5**
763042-A5**
763048-A5**
12”
12”
12”
12”
12”
24”
24”
24”
24”
24”
15”
15”
15”
15”
15”
30”
30”
30”
30”
30”
24”
30”
36”
42”
48”
24”
30”
36”
42”
48”
24”
30”
36”
42”
48”
24”
30”
36”
42”
48”
76-1/4”
76-1/4”
76-1/4”
76-1/4”
76-1/4”
76-1/4”
76-1/4”
76-1/4”
76-1/4”
76-1/4”
76-1/4”
76-1/4”
76-1/4”
76-1/4”
76-1/4”
76-1/4”
76-1/4”
76-1/4”
76-1/4”
76-1/4”
Est.
Lbs.
49
60
72
97
114
84
99
114
148
174
57
68
79
105
120
107
123
140
166
195
List
Price
287.60
293.20
298.50
358.70
391.10
417.40
423.90
434.00
537.10
593.50
323.90
331.30
337.90
396.40
436.20
492.10
500.70
509.30
613.50
672.50
Adder
All units ship knocked down and bulk packed.
**Includes one shelf reinforcement per shelf.
**Includes two shelf reinforcements per shelf.
Shelf reinforcements are not included for top shelf.
Top shelves are unslotted and include prepunched knockout holes for TrakSlider hardware
attachment.
All starter units include 2 closed “L” uprights and all adder units include 1 open “T” upright.
All units include 64-1/4" high uprights, and 2" high front base.
Shelves are 22 gauge designed for record storage. 18 gauge shelves are available, contact
factory for more information.
TEL: 800-828-8018
www.datumfiling.com • sales@datumfiling.com
FOR MOBILE READY SHELVING
Add “M” to the end of the model number when ordering mobile ready shelving. For example:
641224-A5M
Single rivet shelf supports replace front Kick Plate and standard support on bottom shelf allowing
for easy attachment to mobile carriages.
Holes are prepunched into single rivet support to match up with corresponding holes on Datum
TrakSlider carriages.
When ordering mobile ready shelving to be used in conjunction with Datum TrakSlider Systems
please refer to page 65 for additional hardware needs.
5
EFFECTIVE FEBRUARY 1, 2012
Prices and specifications subject to change without notice.
Preconfigured 85-1/4" High, 22 Gauge
Letter
Media: Size
2-2 1/2
pounds
per filin
g inch
ALL PRECONFIGURED UNITS DO NOT INCLUDE DIVIDERS. PLEASE REFER TO
PAGE 44 FOR DIVIDER INFORMATION.
9 Shelves, 8 Openings
STARTER
L
E
T
T
E
R
L
E
G
A
L
Item #
D
W
H
851224-S8M
851230-S8M
851236-S8M
851242-S8M
851248-8SM
852424-S8M*
852430-S8M*
852436-S8M*
852442-S8M**
852448-S8M**
851524-S8M
851530-S8M
851536-S8M
851542-S8M
851548-S8M
853024-S8M**
853030-S8M**
853036-S8M**
853042-S8M**
853048-S8M**
12”
12”
12”
12”
12”
24”
24”
24”
24”
24”
15”
15”
15”
15”
15”
30”
30”
30”
30”
30”
24”
30”
36”
42”
48”
24”
30”
36”
42”
48”
24”
30”
36”
42”
48”
24”
30”
36”
42”
48”
85-1/4”
85-1/4”
85-1/4”
85-1/4”
85-1/4”
85-1/4”
85-1/4”
85-1/4”
85-1/4”
85-1/4”
85-1/4”
85-1/4”
85-1/4”
85-1/4”
85-1/4”
85-1/4”
85-1/4”
85-1/4”
85-1/4”
85-1/4”
8 Shelves, 7 Openings
STARTER
L
E
T
T
E
R
L
E
G
A
L
Item #
D
W
H
851224-S7M
851230-S7M
851236-S7M
851242-S7M
851248-S7M
852424-S7M*
852430-S7M*
852436-S7M*
852442-S7M**
852448-S7M**
851524-S7M
851530-S7M
851536-S7M
851542-S7M
851548-S7M
853024-S7M**
853030-S7M**
853036-S7M**
853042-S7M**
853048-S7M**
12”
12”
12”
12”
12”
24”
24”
24”
24”
24”
15”
15”
15”
15”
15”
30”
30”
30”
30”
30”
24”
30”
36”
42”
48”
24”
30”
36”
42”
48”
24”
30”
36”
42”
48”
24”
30”
36”
42”
48”
85-1/4”
85-1/4”
85-1/4”
85-1/4”
85-1/4”
85-1/4”
85-1/4”
85-1/4”
85-1/4”
85-1/4”
85-1/4”
85-1/4”
85-1/4”
85-1/4”
85-1/4”
85-1/4”
85-1/4”
85-1/4”
85-1/4”
85-1/4”
Legal Si
ze M
2 1/2 -3 edia:
po
per filin unds
g inch
All shelves are placed on 10-1/2" centers for 9-3/4" clear vertical height. Shelf supports are adjustable on 1-1/2" centers.
The following units are only available as Mobile Ready Shelving (see “For Mobile Ready Shelving” as noted below).
Utilizing reference shelves on the following units will result in the loss of clear vertical height within one shelf opening.
Est
List
Lbs. Price
83
488.70
101 496.70
121 505.20
157 594.10
180 644.00
149 744.20
171 754.40
195 768.60
247 931.40
281 1,011.00
100 553.40
117 564.20
136 574.00
173 661.70
194 721.70
188 871.80
212 883.60
238 896.20
279 1,047.60
318 1,135.80
ADDER
Starter
Adder
Item #
D
W
H
851224-A8M
851230-A8M
851236-A8M
851242-A8M
851248-8AM
852424-A8M*
852430-A8M*
852436-A8M*
852442-A8M**
852448-A8M**
851524-A8M
851530-A8M
851536-A8M
851542-A8M
851548-A8M
853024-A8M**
853030-A8M**
853036-A8M**
853042-A8M**
853048-A8M**
12”
12”
12”
12”
12”
24”
24”
24”
24”
24”
15”
15”
15”
15”
15”
30”
30”
30”
30”
30”
24”
30”
36”
42”
48”
24”
30”
36”
42”
48”
24”
30”
36”
42”
48”
24”
30”
36”
42”
48”
85-1/4”
85-1/4”
85-1/4”
85-1/4”
85-1/4”
85-1/4”
85-1/4”
85-1/4”
85-1/4”
85-1/4”
85-1/4”
85-1/4”
85-1/4”
85-1/4”
85-1/4”
85-1/4”
85-1/4”
85-1/4”
85-1/4”
85-1/4”
Est
Lbs.
66
83
102
137
160
121
141
163
215
249
75
94
113
132
151
135
169
203
237
271
List
Price
408.30
416.20
424.70
513.80
563.50
602.40
612.50
626.60
789.60
869.20
461.60
472.40
482.50
570.20
629.90
714.50
726.10
738.80
890.20
978.40
All shelves are placed on 12" centers for 11-1/4" clear vertical height. Shelf supports are adjustable on 1-1/2" centers.
The following units are only available as Mobile Ready Shelving (see “For Mobile Ready Shelving” as noted below).
Utilizing reference shelves on the following units will result in the loss of clear vertical height within one shelf opening.
Est
List
Lbs. Price
81
443.10
93
449.90
111 457.00
143 535.50
163 579.20
139 677.00
158 685.90
179 697.40
225 840.50
255 910.70
94
502.10
108 511.70
124 520.00
157 597.30
175 649.70
160 793.20
195 803.00
217 813.50
254 946.20
288 1,024.30
ADDER
Starter
Adder
TEL: 800-828-8018
D
W
H
851224-A7M
851230-A7M
851236-A7M
851242-A7M
851248-A7M
852424-A7M*
852430-A7M*
852436-A7M*
852442-A7M**
852448-A7M**
851524-A7M
851530-A7M
851536-A7M
851542-A7M
851548-A7M
853024-A7M**
853030-A7M**
853036-A7M**
853042-A7M**
853048-A7M**
12”
12”
12”
12”
12”
24”
24”
24”
24”
24”
15”
15”
15”
15”
15”
30”
30”
30”
30”
30”
24”
30”
36”
42”
48”
24”
30”
36”
42”
48”
24”
30”
36”
42”
48”
24”
30”
36”
42”
48”
85-1/4”
85-1/4”
85-1/4”
85-1/4”
85-1/4”
85-1/4”
85-1/4”
85-1/4”
85-1/4”
85-1/4”
85-1/4”
85-1/4”
85-1/4”
85-1/4”
85-1/4”
85-1/4”
85-1/4”
85-1/4”
85-1/4”
85-1/4”
Est
Lbs.
61
75
91
124
144
109
127
147
193
223
68
84
102
135
153
140
160
182
219
253
List
Price
362.80
369.60
376.40
455.10
498.60
535.20
544.10
555.80
698.80
768.80
410.60
419.80
428.10
505.50
557.90
635.70
645.90
656.10
788.80
866.70
FOR MOBILE READY SHELVING
Add “M” to the end of the model number when ordering mobile ready shelving. For
example: 851224-A6M
Single rivet shelf supports replace front Kick Plate and standard support on bottom shelf
allowing for easy attachment to mobile carriages.
Holes are prepunched into single rivet support to match up with corresponding holes on
Datum TrakSlider carriages.
When ordering mobile ready shelving to be used in conjunction with Datum TrakSlider
Systems please refer to page 65 for additional hardware needs.
All units ship knocked down and bulk packed.
**Includes one shelf reinforcement per shelf.
**Includes two shelf reinforcements per shelf.
Shelf reinforcements are not included for top shelf.
Top shelves are unslotted and include prepunched knockout holes for TrakSlider hardware attachment.
All starter units include 2 closed “L” uprights and all adder units include 1 open “T” upright.
All units include 85-1/4" high uprights, and 2" high front base.
Shelves are 22 gauge designed for record storage. 18 gauge shelves are available, contact factory for
more information.
www.datumfiling.com • sales@datumfiling.com
Item #
6
EFFECTIVE FEBRUARY 1, 2012
Prices and specifications subject to change without notice.
Preconfigured 85-1/4" High, 22 Gauge
ALL PRECONFIGURED UNITS DO NOT INCLUDE DIVIDERS. PLEASE REFER TO PAGE 44
FOR DIVIDER INFORMATION.
7 Shelves, 6 Openings
L
E
G
A
L
Legal Si
ze M
2 1/2 -3 edia:
po
per filin unds
g inch
All shelves are placed on 13-1/2" centers for 12-3/4" clear vertical height. Shelf supports are
adjustable on 1-1/2" centers.
STARTER
L
E
T
T
E
R
Letter
Media: Size
2-2 1/2
pounds
per filin
g inch
Item #
D
W
H
851224-S6
851230-S6
851236-S6
851242-S6
851248-S6
852424-S6*
852430-S6*
852436-S6*
852442-S6**
852448-S6**
851524-S6
851530-S6
851536-S6
851542-S6
851548-S6
853024-S6**
853030-S6**
853036-S6**
853042-S6**
853048-S6**
12”
12”
12”
12”
12”
24”
24”
24”
24”
24”
15”
15”
15”
15”
15”
30”
30”
30”
30”
30”
24”
30”
36”
42”
48”
24”
30”
36”
42”
48”
24”
30”
36”
42”
48”
24”
30”
36”
42”
48”
85-1/4”
85-1/4”
85-1/4”
85-1/4”
85-1/4”
85-1/4”
85-1/4”
85-1/4”
85-1/4”
85-1/4”
85-1/4”
85-1/4”
85-1/4”
85-1/4”
85-1/4”
85-1/4”
85-1/4”
85-1/4”
85-1/4”
85-1/4”
Est
Lbs.
75
86
101
130
149
120
146
164
205
233
86
100
113
143
160
146
179
200
229
262
List
Price
390.10
411.10
417.30
485.90
524.00
619.40
627.50
639.80
766.70
820.60
458.60
466.80
474.00
541.70
587.30
716.30
726.90
737.30
855.90
924.20
ADDER
Starter
Starter
Adder
Item #
D
W
H
851224-A6
851230-A6
851236-A6
851242-A6
851248-A6
852424-A6*
852430-A6*
852436-A6*
852442-A6**
852448-A6**
851524-A6
851530-A6
851536-A6
851542-A6
851548-A6
853024-A6**
853030-A6**
853036-A6**
853042-A6**
853048-A6**
12”
12”
12”
12”
12”
24”
24”
24”
24”
24”
15”
15”
15”
15”
15”
30”
30”
30”
30”
30”
24”
30”
36”
42”
48”
24”
30”
36”
42”
48”
24”
30”
36”
42”
48”
24”
30”
36”
42”
48”
85-1/4”
85-1/4”
85-1/4”
85-1/4”
85-1/4”
85-1/4”
85-1/4”
85-1/4”
85-1/4”
85-1/4”
85-1/4”
85-1/4”
85-1/4”
85-1/4”
85-1/4”
85-1/4”
85-1/4”
85-1/4”
85-1/4”
85-1/4”
Est
Lbs.
55
68
81
111
130
98
115
132
173
201
60
76
91
121
153
127
144
165
194
227
List
Price
332.20
337.40
346.30
414.90
454.30
477.50
485.80
497.90
624.80
678.70
373.80
375.00
449.80
462.40
495.10
559.90
569.40
579.90
698.60
766.80
Adder
All units ship knocked down and bulk packed.
**Includes one shelf reinforcement per shelf.
**Includes two shelf reinforcements per shelf.
Shelf reinforcements are not included for top shelf.
Top shelves are unslotted and include prepunched knockout holes for TrakSlider hardware
attachment.
All starter units include 2 closed “L” uprights and all adder units include 1 open “T” upright.
All units include 85-1/4" high uprights, and 2" high front base.
Shelves are 22 gauge designed for record storage. 18 gauge shelves are available, contact
factory for more information.
TEL: 800-828-8018
www.datumfiling.com • sales@datumfiling.com
FOR MOBILE READY SHELVING
Add “M” to the end of the model number when ordering mobile ready shelving. For
example: 851224-A6M
Single rivet shelf supports replace front Kick Plate and standard support on bottom shelf
allowing for easy attachment to mobile carriages.
Holes are prepunched into single rivet support to match up with corresponding holes on
Datum TrakSlider carriages.
When ordering mobile ready shelving to be used in conjunction with Datum TrakSlider
Systems please refer to page 65 for additional hardware needs.
7
EFFECTIVE FEBRUARY 1, 2012
Prices and specifications subject to change without notice.
Preconfigured 88-1/4" High, 22 Gauge
Letter
Media: Size
2-2 1/2
pounds
per filin
g inch
ALL PRECONFIGURED UNITS DO NOT INCLUDE DIVIDERS. PLEASE REFER TO
PAGE 44 FOR DIVIDER INFORMATION.
9 Shelves, 8 Openings
All shelves are placed on 10-1/2" centers for 9-3/4" clear vertical height. Shelf supports are adjustable on 1-1/2" centers.
STARTER
L
E
T
T
E
R
L
E
G
A
L
Legal Si
ze M
2 1/2 -3 edia:
po
per filin unds
g inch
ADDER
Item #
D
W
H
881224-S8
881230-S8
881236-S8
881242-S8
881248-S8
882424-S8*
882430-S8*
882436-S8*
882442-S8**
882448-S8**
881524-S8
881530-S8
881536-S8
881542-S8
881548-S8
883024-S8**
883030-S8**
883036-S8**
883042-S8**
883048-S8**
12”
12”
12”
12”
12”
24”
24”
24”
24”
24”
15”
15”
15”
15”
15”
30”
30”
30”
30”
30”
24”
30”
36”
42”
48”
24”
30”
36”
42”
48”
24”
30”
36”
42”
48”
24”
30”
36”
42”
48”
88-1/4”
88-1/4”
88-1/4”
88-1/4”
88-1/4”
88-1/4”
88-1/4”
88-1/4”
88-1/4”
88-1/4”
88-1/4”
88-1/4”
88-1/4”
88-1/4”
88-1/4”
88-1/4”
88-1/4”
88-1/4”
88-1/4”
88-1/4”
Est
Lbs.
84
102
122
158
181
150
172
196
248
282
101
118
137
174
195
189
213
239
280
318
List
Price
488.70
496.70
505.20
594.10
644.00
744.20
754.40
768.60
931.40
1,011.00
553.40
564.20
574.00
661.70
721.70
871.80
883.60
896.20
1,047.60
1,135.80
Starter
Item #
D
W
H
881224-A8
881230-A8
881236-A8
881242-A8
881248-A8
882424-A8*
882430-A8*
882436-A8*
882442-A8**
882448-A8**
881524-A8
881530-A8
881536-A8
881542-A8
881548-A8
883024-A8**
883030-A8**
883036-A8**
883042-A8**
883048-A8**
12”
12”
12”
12”
12”
24”
24”
24”
24”
24”
15”
15”
15”
15”
15”
30”
30”
30”
30”
30”
24”
30”
36”
42”
48”
24”
30”
36”
42”
48”
24”
30”
36”
42”
48”
24”
30”
36”
42”
48”
88-1/4”
88-1/4”
88-1/4”
88-1/4”
88-1/4”
88-1/4”
88-1/4”
88-1/4”
88-1/4”
88-1/4”
88-1/4”
88-1/4”
88-1/4”
88-1/4”
88-1/4”
88-1/4”
88-1/4”
88-1/4”
88-1/4”
88-1/4”
Est
Lbs.
67
84
103
139
161
122
142
164
216
250
76
95
114
133
152
136
170
204
238
272
List
Price
408.30
416.20
424.70
513.80
563.50
602.40
612.50
626.60
789.60
869.20
461.60
472.40
482.50
570.20
629.90
714.50
726.10
738.80
890.20
978.40
Adder
8 Shelves, 7 Openings
All shelves are placed on 12" centers for 11-1/4" clear vertical height. Shelf supports
are adjustable on 1-1/2" centers.
STARTER
L
E
T
T
E
R
L
E
G
A
L
ADDER
Item #
D
W
H
881224-S7
881230-S7
881236-S7
881242-S7
881248-S7
882424-S7*
882430-S7*
882436-S7*
882442-S7**
882448-S7**
881524-S7
881530-S7
881536-S7
881542-S7
881548-S7
883024-S7**
883030-S7**
883036-S7**
883042-S7**
883048-S7**
12”
12”
12”
12”
12”
24”
24”
24”
24”
24”
15”
15”
15”
15”
15”
30”
30”
30”
30”
30”
24”
30”
36”
42”
48”
24”
30”
36”
42”
48”
24”
30”
36”
42”
48”
24”
30”
36”
42”
48”
88-1/4”
88-1/4”
88-1/4”
88-1/4”
88-1/4”
88-1/4”
88-1/4”
88-1/4”
88-1/4”
88-1/4”
88-1/4”
88-1/4”
88-1/4”
88-1/4”
88-1/4”
88-1/4”
88-1/4”
88-1/4”
88-1/4”
88-1/4”
Est
List
Lbs.
Price
82
443.10
94
449.90
112
457.00
144
535.50
164
579.20
140
677.00
159
685.90
180
697.40
226
840.50
256
910.70
95
502.10
109
511.70
125
520.00
158
597.30
176
649.70
176
793.20
196
803.00
218
813.50
255
946.20
289 1,024.30
Starter
Adder
TEL: 800-828-8018
D
W
H
881224-A7
881230-A7
881236-A7
881242-A7
881248-A7
882424-A7*
882430-A7*
882436-A7*
882442-A7**
882448-A7**
881524-A7
881530-A7
881536-A7
881542-A7
881548-A7
883024-A7**
883030-A7**
883036-A7**
883042-A7**
883048-A7**
12”
12”
12”
12”
12”
24”
24”
24”
24”
24”
15”
15”
15”
15”
15”
30”
30”
30”
30”
30”
24”
30”
36”
42”
48”
24”
30”
36”
42”
48”
24”
30”
36”
42”
48”
24”
30”
36”
42”
48”
88-1/4”
88-1/4”
88-1/4”
88-1/4”
88-1/4”
88-1/4”
88-1/4”
88-1/4”
88-1/4”
88-1/4”
88-1/4”
88-1/4”
88-1/4”
88-1/4”
88-1/4”
88-1/4”
88-1/4”
88-1/4”
88-1/4”
88-1/4”
Est
Lbs.
62
76
92
125
145
110
128
148
194
224
69
85
103
136
154
141
161
183
220
254
List
Price
362.80
369.60
376.40
455.10
498.60
535.20
544.10
555.80
698.80
768.80
410.60
419.80
428.10
505.50
557.90
635.70
645.90
656.10
788.80
866.70
FOR MOBILE READY SHELVING
Add “M” to the end of the model number when ordering mobile ready shelving. For
example: 881224-A6M
Single rivet shelf supports replace front Kick Plate and standard support on bottom shelf
allowing for easy attachment to mobile carriages.
Holes are prepunched into single rivet support to match up with corresponding holes on
Datum TrakSlider carriages.
When ordering mobile ready shelving to be used in conjunction with Datum TrakSlider
Systems please refer to page 65 for additional hardware needs.
All units ship knocked down and bulk packed.
**Includes one shelf reinforcement per shelf.
**Includes two shelf reinforcements per shelf.
Shelf reinforcements are not included for top shelf.
Top shelves are unslotted and include prepunched knockout holes for TrakSlider hardware attachment.
All starter units include 2 closed “L” uprights and all adder units include 1 open “T” upright.
All units include 88-1/4" high uprights, and 2" high front base.
Shelves are 22 gauge designed for record storage. 18 gauge shelves are available, contact factory for
more information.
www.datumfiling.com • sales@datumfiling.com
Item #
8
EFFECTIVE FEBRUARY 1, 2012
Prices and specifications subject to change without notice.
Preconfigured 88-1/4" High, 22 Gauge
Letter
Media: Size
2-2 1/2
pounds
per filin
g inch
ALL PRECONFIGURED UNITS DO NOT INCLUDE DIVIDERS. PLEASE REFER TO
PAGE 44 FOR DIVIDER INFORMATION.
7 Shelves, 6 Openings
All shelves are placed on 13-1/2" centers for 12-3/4" clear vertical height. Shelf supports are adjustable on 1-1/2" centers.
STARTER
L
E
T
T
E
R
L
E
G
A
L
Item #
D
W
H
881224-S6
881230-S6
881236-S6
881242-S6
881248-S6
882424-S6*
882430-S6*
882436-S6*
882442-S6**
882448-S6**
881524-S6
881530-S6
881536-S6
881542-S6
881548-S6
883024-S6**
883030-S6**
883036-S6**
883042-S6**
883048-S6**
12”
12”
12”
12”
12”
24”
24”
24”
24”
24”
15”
15”
15”
15”
15”
30”
30”
30”
30”
30”
24”
30”
36”
42”
48”
24”
30”
36”
42”
48”
24”
30”
36”
42”
48”
24”
30”
36”
42”
48”
88-1/4”
88-1/4”
88-1/4”
88-1/4”
88-1/4”
88-1/4”
88-1/4”
88-1/4”
88-1/4”
88-1/4”
88-1/4”
88-1/4”
88-1/4”
88-1/4”
88-1/4”
88-1/4”
88-1/4”
88-1/4”
88-1/4”
88-1/4”
Legal Si
ze M
2 1/2 -3 edia:
po
per filin unds
g inch
Est
Lbs.
75
87
102
131
150
129
147
165
205
235
75
101
114
144
161
162
180
199
230
263
List
Price
405.30
411.10
417.30
486.50
524.00
619.40
626.40
637.10
762.50
827.00
458.60
466.80
474.00
541.70
587.30
717.40
726.90
735.60
856.10
924.20
ADDER
Item #
881224-A6
881230-A6
881236-A6
881242-A6
881248-A6
882424-A6*
882430-A6*
882436-A6*
Starter
882442-A6**
Starter
882448-A6**
881524-A6
881530-A6
881536-A6
881542-A6
881548-A6
883024-A6**
883030-A6**
883036-A6**
883042-A6**
Adder
Adder883048-A6**
All units ship knocked down and bulk packed.
**Includes one shelf reinforcement per shelf.
**Includes two shelf reinforcements per shelf.
Shelf reinforcements are not included for top shelf.
Top shelves are unslotted and include prepunched knockout holes for TrakSlider hardware
attachment.
All starter units include 2 closed “L” uprights and all adder units include 1 open “T” upright.
All units include 88-1/4" high uprights, and 2" high front base.
Shelves are 22 gauge designed for record storage. 18 gauge shelves are available, contact factory
for more information.
TEL: 800-828-8018
www.datumfiling.com • sales@datumfiling.com
9
D
W
H
12”
12”
12”
12”
12”
24”
24”
24”
24”
24”
15”
15”
15”
15”
15”
30”
30”
30”
30”
30”
24”
30”
36”
42”
48”
24”
30”
36”
42”
48”
24”
30”
36”
42”
48”
24”
30”
36”
42”
48”
88-1/4”
88-1/4”
88-1/4”
88-1/4”
88-1/4”
88-1/4”
88-1/4”
88-1/4”
88-1/4”
88-1/4”
88-1/4”
88-1/4”
88-1/4”
88-1/4”
88-1/4”
88-1/4”
88-1/4”
88-1/4”
88-1/4”
88-1/4”
Est
Lbs.
57
69
82
112
131
99
116
133
173
203
55
77
92
122
139
127
145
164
195
228
List
Price
324.90
330.90
336.90
405.90
443.30
477.50
484.60
495.30
620.80
685.10
371.80
375.00
382.20
449.80
495.70
560.10
569.40
578.30
698.80
766.80
FOR MOBILE READY SHELVING
Add “M” to the end of the model number when ordering mobile ready shelving. For example:
881224-A6M
Single rivet shelf supports replace front Kick Plate and standard support on bottom shelf
allowing for easy attachment to mobile carriages.
Holes are prepunched into single rivet support to match up with corresponding holes on
Datum TrakSlider carriages.
When ordering mobile ready shelving to be used in conjunction with Datum TrakSlider
Systems please refer to page 65 for additional hardware needs.
EFFECTIVE FEBRUARY 1, 2012
Prices and specifications subject to change without notice.
Preconfigured 97-1/4" High, 22 Gauge
Letter
Media: Size
2-2 1/2
pounds
per filin
g inch
ALL PRECONFIGURED UNITS DO NOT INCLUDE DIVIDERS. PLEASE REFER TO PAGE 44
FOR DIVIDER INFORMATION.
10 Shelves,
9 Openings
All shelves are placed on 10-1/2" centers for 9-3/4" clear vertical height. Shelf supports are adjustable on 1-1/2"
centers. When ordering ­reference shelves for the following units, Mobile Ready Shelving must be ordered. Not
specifying Mobile Ready Shelving will result in loss of clear vertical height within one shelf opening.
ADDER
STARTER
L
E
T
T
E
R
L
E
G
A
L
Legal Si
ze M
2 1/2 -3 edia:
po
per filin unds
g inch
Item #
D
W
H
971224-S9
971230-S9
971236-S9
971242-S9
971248-S9
972424-S9*
972430-S9*
972436-S9*
972442-S9**
972448-S9**
971524-S9
971530-S9
971536-S9
971542-S9
971548-S9
973024-S9**
973030-S9**
973036-S9**
973042-S9**
973048-S9**
12”
12”
12”
12”
12”
24”
24”
24”
24”
24”
15”
15”
15”
15”
15”
30”
30”
30”
30”
30”
24”
30”
36”
42”
48”
24”
30”
36”
42”
48”
24”
30”
36”
42”
48”
24”
30”
36”
42”
48”
97-1/4”
97-1/4”
97-1/4”
97-1/4”
97-1/4”
97-1/4”
97-1/4”
97-1/4”
97-1/4”
97-1/4”
97-1/4”
97-1/4”
97-1/4”
97-1/4”
97-1/4”
97-1/4”
97-1/4”
97-1/4”
97-1/4”
97-1/4”
Est
Lbs.
98
114
132
168
192
171
191
213
266
300
95
131
169
186
207
214
237
262
299
341
List
Price
577.90
586.70
596.10
695.10
750.20
862.80
873.80
889.60
1,071.20
1,159.40
655.40
667.50
678.50
776.00
842.30
1,020.10
1,032.90
1,020.80
1,215.70
1,313.60
Starter
Item #
D
W
H
971224-A9
971230-A9
971236-A9
971242-A9
971248-A9
972424-A9*
972430-A9*
972436-A9*
972442-A9**
972448-A9**
971524-A9
971530-A9
971536-A9
971542-A9
971548-A9
973024-A9**
973030-A9**
973036-A9**
973042-A9**
973048-A9**
12”
12”
12”
12”
12”
24”
24”
24”
24”
24”
15”
15”
15”
15”
15”
30”
30”
30”
30”
30”
24”
30”
36”
42”
48”
24”
30”
36”
42”
48”
24”
30”
36”
42”
48”
24”
30”
36”
42”
48”
97-1/4”
97-1/4”
97-1/4”
97-1/4”
97-1/4”
97-1/4”
97-1/4”
97-1/4”
97-1/4”
97-1/4”
97-1/4”
97-1/4”
97-1/4”
97-1/4”
97-1/4”
97-1/4”
97-1/4”
97-1/4”
97-1/4”
97-1/4”
Est
Lbs.
76
92
110
146
170
139
158
179
232
266
89
106
125
162
183
176
199
224
260
303
List
Price
468.70
477.60
591.90
586.00
641.20
682.60
693.80
709.70
891.10
979.30
529.50
541.30
552.40
649.70
716.30
805.40
818.10
832.30
1,000.90
1,098.90
Adder
All shelves are placed on 12" centers for 11-1/4" clear vertical height. Shelf supports are adjustable on 1-1/2" centers.
The following units are only available as Mobile Ready Shelving (see “For Mobile Ready Shelving” notes below).
Utilizing reference shelves on the following units will result in the loss of clear vertical height within one shelf opening.
9 Shelves,
8 Openings
ADDER
STARTER
L
E
T
T
E
R
L
E
G
A
L
Item #
D
W
H
971224-S8M
971230-S8M
971236-S8M
971242-S8M
971248-S8M
972424-S8M*
972430-S8M*
972436-S8M*
972442-S8M**
972448-S8M**
971524-S8M
971530-S8M
971536-S8M
971542-S8M
971548-S8M
973024-S8M**
973030-S8M**
973036-S8M**
973042-S8M**
973048-S8M**
12”
12”
12”
12”
12”
24”
24”
24”
24”
24”
15”
15”
15”
15”
15”
30”
30”
30”
30”
30”
24”
30”
36”
42”
48”
24”
30”
36”
42”
48”
24”
30”
36”
42”
48”
24”
30”
36”
42”
48”
97-1/4”
97-1/4”
97-1/4”
97-1/4”
97-1/4”
97-1/4”
97-1/4”
97-1/4”
97-1/4”
97-1/4”
97-1/4”
97-1/4”
97-1/4”
97-1/4”
97-1/4”
97-1/4”
97-1/4”
97-1/4”
97-1/4”
97-1/4”
Est
Lbs.
92
106
122
153
173
160
177
196
241
272
108
122
138
169
188
200
220
242
273
310
List
Price
540.00
547.90
556.30
645.50
695.10
804.10
814.40
828.50
991.70
1,071.00
611.80
622.70
632.80
720.30
780.00
913.60
961.50
974.30
1,125.50
1,213.60
Starter
Adder
All units ship knocked down and bulk packed.
**Includes one shelf reinforcement per shelf.
**Includes two shelf reinforcements per shelf.
Shelf reinforcements are not included for top shelf.
Top shelves are unslotted and include prepunched knockout holes for TrakSlider hardware
attachment.
All starter units include 2 closed “L” uprights and all adder units include 1 open “T” upright.
All units include 97-1/4" high uprights, and 2" high front base.
Shelves are 22 gauge designed for record storage. 18 gauge shelves are available, contact factory
for more information.
TEL: 800-828-8018
www.datumfiling.com • sales@datumfiling.com
Item #
D
W
H
971224-A8M
971230-A8M
971236-A8M
971242-A8M
971248-A8M
972424-A8M*
972430-A8M*
972436-A8M*
972442-A8M**
972448-A8M**
971524-A8M
971530-A8M
971536-A8M
971542-A8M
971548-A8M
973024-A8M**
973030-A8M**
973036-A8M**
973042-A8M**
973048-A8M**
12”
12”
12”
12”
12”
24”
24”
24”
24”
24”
15”
15”
15”
15”
15”
30”
30”
30”
30”
30”
24”
30”
36”
42”
48”
24”
30”
36”
42”
48”
24”
30”
36”
42”
48”
24”
30”
36”
42”
48”
97-1/4”
97-1/4”
97-1/4”
97-1/4”
97-1/4”
97-1/4”
97-1/4”
97-1/4”
97-1/4”
97-1/4”
97-1/4”
97-1/4”
97-1/4”
97-1/4”
97-1/4”
97-1/4”
97-1/4”
97-1/4”
97-1/4”
97-1/4”
Est
Lbs.
70
84
100
131
151
126
143
162
208
239
82
97
114
145
164
161
181
203
234
272
List
Price
430.90
438.80
447.30
536.40
586.00
609.00
619.30
633.30
796.30
875.60
485.80
496.70
506.40
594.20
653.70
735.20
750.60
759.40
910.80
999.00
FOR MOBILE READY SHELVING
Add “M” to the end of the model number when ordering mobile ready shelving. For
example: 971224-A8M
Single rivet shelf supports replace front Kick Plate and standard support on bottom shelf
allowing for easy attachment to mobile carriages.
Holes are prepunched into single rivet support to match up with corresponding holes on
Datum TrakSlider carriages.
When ordering mobile ready shelving to be used in conjunction with Datum TrakSlider
Systems please refer to page 65 for additional hardware needs.
10
EFFECTIVE FEBRUARY 1, 2012
Prices and specifications subject to change without notice.
Preconfigured 97-1/4" High, 22 Gauge
Letter
Media: Size
2-2 1/2
pounds
per filin
g inch
ALL PRECONFIGURED UNITS DO NOT INCLUDE DIVIDERS. PLEASE REFER TO
PAGE 44 FOR DIVIDER INFORMATION.
All shelves are placed on 13" centers for 12" clear vertical height. Shelf supports are adjustable on 1-1/2" centers. When
ordering reference shelves for the following units, Mobile Ready Shelving must be ordered. Not specifying Mobile Ready
Shelving will result in loss of clear ­vertical height within one shelf opening.
8 Shelves,
7 Openings
STARTER
L
E
T
T
E
R
L
E
G
A
L
Legal Si
ze M
2 1/2 -3 edia:
po
per filin unds
g inch
Item #
D
W
H
971224-S7
971230-S7
971236-S7
971242-S7
971248-S7
972424-S7*
972430-S7*
972436-S7*
972442-S7**
972448-S7**
971524-S7
971530-S7
971536-S7
971542-S7
971548-S7
973024-S7**
973030-S7**
973036-S7**
973042-S7**
973048-S7**
12”
12”
12”
12”
12”
24”
24”
24”
24”
24”
15”
15”
15”
15”
15”
30”
30”
30”
30”
30”
24”
30”
36”
42”
48”
24”
30”
36”
42”
48”
24”
30”
36”
42”
48”
24”
30”
36”
42”
48”
97-1/4”
97-1/4”
97-1/4”
97-1/4”
97-1/4”
97-1/4”
97-1/4”
97-1/4”
97-1/4”
97-1/4”
97-1/4”
97-1/4”
97-1/4”
97-1/4”
97-1/4”
97-1/4”
97-1/4”
97-1/4”
97-1/4”
97-1/4”
Est
List
Lbs. Price
87
501.90
99
509.10
112 516.70
140 596.30
159 640.10
149 746.40
165 754.80
181 768.30
220 913.50
251 987.30
101 568.30
114 584.20
127 586.70
155 559.70
173 718.00
186 874.30
204 885.30
223 899.50
248 1,035.40
284 1,113.80
ADDER
Starter
Starter
Adder
Item #
D
W
H
971224-A7
971230-A7
971236-A7
971242-A7
971248-A7
972424-A7*
972430-A7*
972436-A7*
972442-A7**
972448-A7**
971524-A7
971530-A7
971536-A7
971542-A7
971548-A7
973024-A7**
973030-A7**
973036-A7**
973042-A7**
973048-A7**
12”
12”
12”
12”
12”
24”
24”
24”
24”
24”
15”
15”
15”
15”
15”
30”
30”
30”
30”
30”
24”
30”
36”
42”
48”
24”
30”
36”
42”
48”
24”
30”
36”
42”
48”
24”
30”
36”
42”
48”
97-1/4”
97-1/4”
97-1/4”
97-1/4”
97-1/4”
97-1/4”
97-1/4”
97-1/4”
97-1/4”
97-1/4”
97-1/4”
97-1/4”
97-1/4”
97-1/4”
97-1/4”
97-1/4”
97-1/4”
97-1/4”
97-1/4”
97-1/4”
Est
Lbs.
65
77
90
118
137
115
131
147
187
218
75
89
103
131
149
147
165
184
209
246
List
Price
393.10
400.20
407.50
487.20
531.00
566.40
575.00
588.20
733.30
807.20
442.10
451.80
460.60
538.70
591.70
659.40
670.50
681.60
820.70
899.10
Adder
All units ship knocked down and bulk packed.
**Includes one shelf reinforcement per shelf.
**Includes two shelf reinforcements per shelf.
Shelf reinforcements are not included for top shelf.
Top shelves are unslotted & include prepunched knockout holes for TrakSlider hardware
attachment.
All starter units include 2 closed “L” uprights and all adder units include 1 open “T” upright.
All units include 97-1/4" high uprights, and 2" high front base.
Shelves are 22 gauge designed for record storage. 18 gauge shelves are available, contact
factory for more information.
TEL: 800-828-8018
www.datumfiling.com • sales@datumfiling.com
FOR MOBILE READY SHELVING
Add “M” to the end of the model number when ordering mobile ready shelving. For example:
971224-A8M
Single rivet shelf supports replace front Kick Plate and standard support on bottom shelf
allowing for easy attachment to mobile carriages.
Holes are prepunched into single rivet support to match up with corresponding holes on
Datum TrakSlider carriages.
When ordering mobile ready shelving to be used in conjunction with Datum TrakSlider
Systems please refer to page 65 for additional hardware needs.
11
EFFECTIVE FEBRUARY 1, 2012
Prices and specifications subject to change without notice.
Library Shelving General Information & Specifications
GENERAL INFORMATION
Product Description: Datum Library Shelving offers exceptional strength and durability for a variety of storage
applications. 4Post shelving incorporates both “L” & “T” shaped uprights allowing for a variety of shelving configurations.
Interlocking keyhole uprights combined with double rivet shelf supports are designed to offer maximum strength and
durability with exceptional versatility. All shelf units are assembled without the use of nuts, bolts, or clips and are available
for both single entry (wall unit) and double entry (back to back storage) allowing for maximum filing/storage capacity
with minimal floor intrusion. Shelves are available slotted to accept adjustable file dividers. All shelf units are designed
for expansion and are available as mobile ready for easy conversion to Datum TrakSlider Systems. Datum 4Post Shelving
is ready to assemble with no special tools required. Available in a variety of depths making it an ideal choice for storage
applications.
SPECIFICATIONS
Closed Uprights: Are 18 gauge cold rolled steel, roll formed into a 1” wide “L” and 2” wide “T” uprights with keyhole slot
holes punched on 1-1/2” centers on inner wall of upright only. There are no holes on the exterior portion of the upright.
Front and rear posts are joined together with 24 gauge double wall fillers that maintains the proper upright spacing along
the entire length of the upright and adds rigidity and strength. The double wall construction of our uprights helps conceal
the keyhole slots presenting a clean and contemporary appearance, while preventing books from having there titles
obscured. All uprights include an identifiable pair of punched holes every 6” on center allowing a visual confirmation for
proper shelf spacing.
Library Shelves: Shelves are formed of 22 gauge cold rolled steel with a 3/4” flange on all sides. Front and Back shelf
sides to include a 9/32” stiffener flange for added strength. Shelves are available plain or with slots punched on 2” centers
to accept adjustable dividers.
TrakSlider Library Tops: Tops are formed of 22 gauge cold rolled steel with a 3/4” flange on all sides. Front and
Back top sides to include a 9/32” stiffener flange for added strength. All tops are prepunched with knock-outs to accept
TrakSlider overhead anti-tip mounting hardware.
Shelf Support: Shelf supports are formed of 14 gauge (11 gauge for 42” and 48” widths) hot rolled pickled steel 3/4”
high. Each support end is formed flat and includes two shoulder rivets with 7/16” diameter heads for attachment to
corresponding keyholes in upright. Shelf supports are available with single or double rivets. All single rivet shelf supports
are designed to sit flush with bottom of shelf upright and are prepunched to align with holes on Datum TrakSlider carriages
for easy attachment.
Shelf Reinforcement: Shelf reinforcements are formed of 13 gauge hot roll, pickled steel and formed into a channel
shape. Shelf reinforcements are notched on each end and align with respective shelf support.
Back Stops: Back stops are formed of 18 gauge cold rolled steel with a 7/16” channel at the top and similar bend at the
bottom and are slotted on the face. Slots on Back stops are punched on same centers as the shelf and are used to accept
back tab of adjustable divider. Ends of Back stop include one shoulder rivet with 7/16” diameter head for attachment to
corresponding keyholes in upright. Back stops are used for single entry shelving only.
Center Stops: Center stops are formed of 20 gauge cold rolled steel with a 9/16” formed channel on the top and a 9/16”
return bend on the bottom. Formed channels on the top are punched on same centers as the shelf and are used for back
to back support of adjustable divider. The overall height of center stop is 4” and includes mounting holes on bottom flange
for easy assembly using 1/4” nuts and bolts. Center stops are used for double entry shelving only.
Kick Plate: Kick Plates are formed of 14 or 16 gauge cold rolled steel formed with a stiffener flange on top and bottom
edge. Kick Plates are available in 2” and 4” heights.
Adjustable Dividers: Dividers are formed from 20 gauge cold rolled steel. Dividers are punched to include two tabs on
the base and one located on the rear. Dividers can only be used with Back or Center stops.
Sectional Backs: Sectional backs are formed of 22 gauge cold rolled steel, positioned on the inner rear post, and are
securely held in place by a formed retainer flange positioned between the shelf support and post. Each back section will
include a formed channel on the top and bottom and include punched holes for joining sections together. Backs of 40” high
are one-piece, 64” high are two-piece, and up to 97” are three-piece construction. Sectional back panels will add 3/8” to
overall depth of shelving.
Pull Out Reference Shelves: Pull out reference shelves shall be formed of 20 gauge cold rolled steel and attach to
underside of shelf supports. Pull out reference shelves operate on full extension ball bearing suspensions and are available
to mount on single or double entry shelving.
Finish: All steel parts are thoroughly cleaned using a three-stage iron phosphate washer and then coated
with an Epoxy-Hybrid powder coat finish using a state-of-the-art electrostatic paint system. Powder coating
provides a superior, attractive, uniform finish that is more durable, scratch and corrosion resistant, and
environmentally friendly than liquid paint.
FOR ADDITIONAL INFORMATION ON ORDERING, TERMS AND CONDITIONS,
PRICING AND SHIPPING, REFER TO PAGE i.
TEL: 800-828-8018
www.datumfiling.com • sales@datumfiling.com
12
EFFECTIVE FEBRUARY 1, 2012
Prices and specifications subject to change without notice.
Book Size
Media:
3-31/2
pounds per
filing inch
Book Size
Media:
3-31/2
Preconfigured 76-1/4" High Library, 22 Gauge
pounds per
filing inch
All preconfigured units do not include dividers. Please refer to page 44 for divider information.
7 Shelves, 6 Openings
All shelves are placed on 12" centers for 11-1/4" clear vertical height. Shelf supports are adjustable on 1-1/2" centers.
Shelves are unslotted and cannot accept dividers. Closed backs are sold separately, refer to page 43 for more information.
STARTER
U
N
S
L
O
T
T
E
D
S
H
E
L
V
E
S
S
I
N
G
L
E E
N
T
R
Y
D
O
U
B
L
E
E
N
T
R
Y
Item #
760924-S6L
760930-S6L
760936-S6L
760942-S6L
790948-S6L
761224-S6L
761230-S6L
761236-S6L
761242-S6L
761248-S6L
761524-S6L
761530-S6L
761536-S6L
761542-S6L
761548-S6L
761824-S6L*
761830-S6L*
761836-S6L*
761842-S6L**
761848-S6L**
762424-S6L*
762430-S6L*
762436-S6L*
762442-S6L**
762448-S6L**
763024-S6L*
763030-S6L*
763036-S6L*
763042-S6L**
763048-S6L**
ADDER
D
9”
9”
9”
9”
9”
12”
12”
12”
12”
12”
15”
15”
15”
15”
15”
18”
18”
18”
18”
18”
24”
24”
24”
24”
24”
30”
30”
30”
30”
30”
W
24”
30”
36”
42”
48”
24”
30”
36”
42”
48”
24”
30”
36”
42”
48”
24”
30”
36”
42”
48”
24”
30”
36”
42”
48”
24”
30”
36”
42”
48”
H
76”
76”
76”
76”
76”
76”
76”
76”
76”
76”
76”
76”
76”
76”
76”
76”
76”
76”
76”
76”
76”
76”
76”
76”
76”
76”
76”
76”
76”
76”
Est Lbs. List Price
72
426.70
83
432.90
94
439.30
121
507.20
128
542.10
83
462.70
94
469.00
105
475.40
132
548.00
139
588.50
94
514.70
105
520.70
116
527.30
143
595.80
150
636.80
110
603.90
122
612.20
150
620.80
177
703.20
197
760.20
135
712.50
146
720.70
157
729.30
191
819.40
211
897.60
169
805.50
176
813.80
196
822.50
223
909.20
256
1,000.20
7 Shelves, 6 Openings
Starter
Adder
S
L
O
T
T
E
D
S
H
E
L
V
E
S
D
9”
9”
9”
9”
9”
12”
12”
12”
12”
12”
15”
15”
15”
15”
15”
18”
18”
18”
18”
18”
24”
24”
24”
24”
24”
30”
30”
30”
30”
30”
W
24”
30”
36”
42”
48”
24”
30”
36”
42”
48”
24”
30”
36”
42”
48”
24”
30”
36”
42”
48”
24”
30”
36”
42”
48”
24”
30”
36”
42”
48”
H
76”
76”
76”
76”
76”
76”
76”
76”
76”
76”
76”
76”
76”
76”
76”
76”
76”
76”
76”
76”
76”
76”
76”
76”
76”
76”
76”
76”
76”
76”
Est Lbs. List Price
57
361.60
68
367.90
79
374.50
106
442.40
113
477.20
68
379.30
73
385.60
77
389.20
100
458.70
124
505.20
77
422.30
88
429.00
99
435.30
126
503.70
133
544.60
94
507.30
108
515.70
122
524.30
149
606.80
169
663.80
113
585.90
124
594.40
135
602.80
169
692.80
189
771.20
141
657.10
147
662.10
168
670.60
195
760.00
228
848.50
All shelves are placed on 12" centers for 11-1/4" clear vertical height. Shelf supports are adjustable on 1-1/2" centers.
Shelves are slotted to accept dividers. Closed backs are sold separately, refer to page 43 for more information.
STARTER
Item #
760924-S6LS
760930-S6LS
S
760936-S6LS
I
760942-S6LS
N
790948-S6LS
G
761224-S6LS
L
761230-S6LS
E 761236-S6LS
761242-S6LS
E
761248-S6LS
N
761524-S6LS
761530-S6LS
T
761536-S6LS
R
761542-S6LS
Y
761548-S6LS
761824-S6LS*
D 761830-S6LS*
O 761836-S6LS*
U 761842-S6LS**
B 761848-S6LS**
762424-S6LS*
L
762430-S6LS*
E
762436-S6LS*
762442-S6LS**
E 762448-S6LS**
N 763024-S6LS*
T 763030-S6LS*
R 763036-S6LS*
Y 763042-S6LS**
763048-S6LS**
Item #
760924-A6L
760930-A6L
760936-A6L
760942-A6L
790948-A6L
761224-A6L
761230-A6L
761236-A6L
761242-A6L
761248-A6L
761524-A6L
761530-A6L
761536-A6L
761542-A6L
761548-A6L
761824-A6L*
761830-A6L*
761836-A6L*
761842-A6L**
761848-A6L**
762424-A6L*
762430-A6L*
762436-A6L*
762442-A6L**
762448-A6L**
763024-A6L*
763030-A6L*
763036-A6L*
763042-A6L**
763048-A6L**
ADDER
D
9”
9”
9”
9”
9”
12”
12”
12”
12”
12”
15”
15”
15”
15”
15”
18”
18”
18”
18”
18”
24”
24”
24”
24”
24”
30”
30”
30”
30”
30”
W
24”
30”
36”
42”
48”
24”
30”
36”
42”
48”
24”
30”
36”
42”
48”
24”
30”
36”
42”
48”
24”
30”
36”
42”
48”
24”
30”
36”
42”
48”
H Est Lbs. List Price
76”
72
426.70
76”
83
432.90
76”
94
439.30
76”
121
507.20
76”
128
542.10
76”
83
462.70
76”
94
469.00
76”
105
475.40
76”
132
548.00
76”
139
588.50
76”
94
514.70
76”
105
520.70
76”
116
527.30
76”
143
595.80
76”
150
636.80
76”
110
603.90
76”
122
612.20
76”
150
620.80
76”
177
703.20
76”
197
760.20
76”
135
712.50
76”
146
720.70
76”
157
729.30
76”
191
819.40
76”
211
897.60
76”
169
805.50
76”
176
813.80
76”
196
822.50
76”
223
911.40
76”
256
1,000.20
All units ship knocked down and bulk packed.
**Includes one shelf reinforcement per shelf.
**Includes two shelf reinforcements per shelf.
Shelf reinforcements are not included for top shelf. Top shelves are unslotted and include
prepunched knockout holes for TrakSlider hardware attachment. All starter units include
2 closed “L” uprights and all adder units include 1 closed “T” upright. All units include
64-1/4" high uprights, and 2" high front base. Shelves are 22 gauge designed, but
not limited to, book storage. 18 gauge shelves are available, contact factory for more
information. Used FDB dividers to 9" deep shelving, FDL dividers for all other sizes.
TEL: 800-828-8018
www.datumfiling.com • sales@datumfiling.com
Starter
Adder
Item #
760924-A6LS
760930-A6LS
760936-A6LS
760942-A6LS
790948-A6LS
761224-A6LS
761230-A6LS
761236-A6LS
761242-A6LS
761248-A6LS
761524-A6LS
761530-A6LS
761536-A6LS
761542-A6LS
761548-A6LS
761824-A6LS*
761830-A6LS*
761836-A6LS*
761842-A6LS**
761848-A6LS**
762424-A6LS*
762430-A6LS*
762436-A6LS*
762442-A6LS**
762448-A6LS**
763024-A6LS*
763030-A6LS*
763036-A6LS*
763042-A6LS**
763048-A6LS**
D
9”
9”
9”
9”
9”
12”
12”
12”
12”
12”
15”
15”
15”
15”
15”
18”
18”
18”
18”
18”
24”
24”
24”
24”
24”
30”
30”
30”
30”
30”
W
24”
30”
36”
42”
48”
24”
30”
36”
42”
48”
24”
30”
36”
42”
48”
24”
30”
36”
42”
48”
24”
30”
36”
42”
48”
24”
30”
36”
42”
48”
H Est Lbs. List Price
76”
57
361.60
76”
68
367.90
76”
79
374.50
76”
106
442.40
76”
113
477.20
76”
68
379.30
76”
73
385.60
76”
77
389.20
76”
100
458.70
76”
124
505.20
76”
77
422.70
76”
88
429.00
76”
99
435.30
76”
126
503.70
76”
133
544.60
76”
94
507.30
76”
108
515.70
76”
122
524.30
76”
149
606.80
76”
169
663.80
76”
113
585.90
76”
124
594.40
76”
135
622.70
76”
169
692.80
76”
189
771.20
76”
141
653.80
76”
147
662.10
76”
168
670.60
76”
195
760.00
76”
228
848.50
FOR MOBILE READY SHELVING
Add “M” to the end of the model number when ordering mobile ready shelving. For example:
641224-A5M
Single rivet shelf supports replace front Kick Plate and standard support on bottom shelf allowing
for easy attachment to mobile carriages.
Holes are prepunched into single rivet support to match up with corresponding holes on Datum
TrakSlider carriages.
When ordering mobile ready shelving to be used in conjunction with Datum TrakSlider Systems
please refer to page 65 for additional hardware needs.
13
EFFECTIVE FEBRUARY 1, 2012
Prices and specifications subject to change without notice.
Book Size
Media:
3-31/2
Preconfigured 88-1/4" High Library, 22 Gauge
pounds per
filing inch
All preconfigured units do not include dividers. Please refer to page 44 for divider information.
8 Shelves, 7 Openings
All shelves are placed on 12" centers for 11-1/4" clear vertical height. Shelf supports are adjustable on 1-1/2" centers.
Shelves are unslotted and cannot accept dividers. Closed backs are sold separately, refer to page 43 for more information.
Includes Unslotted Center and/or Back Stops as needed.
STARTER
U
N
S
L
O
T
T
E
D
S
H
E
L
V
E
S
S
I
N
G
L
E E
N
T
R
Y
D
O
U
B
L
E
E
N
T
R
Y
Item #
880924-S7L
880930-S7L
880936-S7L
880942-S7L
880948-S7L
881224-S7L
881230-S7L
881236-S7L
881242-S7L
881248-S7L
881524-S7L
881530-S7L
881536-S7L
881542-S7L
881548-S7L
881824-S7L*
881830-S7L*
881836-S7L*
881842-S7L**
881848-S7L**
882424-S7L*
882430-S7L*
882436-S7L*
882442-S7L**
882448-S7L**
883024-S7L*
883030-S7L*
883036-S7L*
883042-S7L**
883048-S7L**
ADDER
D
9”
9”
9”
9”
9”
12”
12”
12”
12”
12”
15”
15”
15”
15”
15”
18”
18”
18”
18”
18”
24”
24”
24”
24”
24”
30”
30”
30”
30”
30”
W
24”
30”
36”
42”
48”
24”
30”
36”
42”
48”
24”
30”
36”
42”
48”
24”
30”
36”
42”
48”
24”
30”
36”
42”
48”
24”
30”
36”
42”
48”
H Est Lbs. List Price
88”
83
444.20
88”
96
444.20
88”
108
457.70
88”
140
535.80
88”
147
566.50
88”
90
482.70
88”
97
489.40
88”
122
496.10
88”
153
573.10
88”
161
615.80
88”
102
537.10
88”
109
543.70
88”
134
550.50
88”
173
666.10
88”
213
813.30
88”
127
630.50
88”
139
639.00
88”
149
602.40
88”
192
735.60
88”
215
795.90
88”
156
751.90
88”
163
760.50
88”
169
723.90
88”
220
864.80
88”
243
948.30
88”
197
857.00
88”
204
865.60
88”
216
828.80
88”
259
968.70
88”
297
1,063.30
8 Shelves, 7 Openings
STARTER
S
L
O
T
T
E
D
S
H
E
L
V
E
S
Item #
880924-S7LS
880930-S7LS
S
880936-S7LS
I
880942-S7LS
N
880948-S7LS
G
881224-S7LS
L
E 881230-S7LS
881236-S7LS
881242-S7LS
E
881248-S7LS
N
881524-S7LS
T
881530-S7LS
R
881536-S7LS
Y
881542-S7LS
881548-S7LS
881824-S7LS*
D 881830-S7LS*
O 881836-S7LS*
U 881842-S7LS**
B 881848-S7LS**
L 882424-S7LS*
882430-S7LS*
E
882436-S7LS*
882442-S7LS**
E 882448-S7LS**
N 883024-S7LS*
T 883030-S7LS*
R 883036-S7LS*
Y 883042-S7LS**
883048-S7LS**
Starter
Adder
Item #
880924-A7L
880930-A7L
880936-A7L
880942-A7L
880948-A7L
881224-A7L
881230-A7L
881236-A7L
881242-A7L
881248-A7L
881524-A7L
881530-A7L
881536-A7L
881542-A7L
881548-A7L
881824-A7L*
881830-A7L*
881836-A7L*
881842-A7L**
881848-A7L**
882424-A7L*
882430-A7L*
882436-A7L*
882442-A7L**
882448-A7L**
883024-A7L*
883030-A7L*
883036-A7L*
883042-A7L**
883048-A7L**
D
9”
9”
9”
9”
9”
12”
12”
12”
12”
12”
15”
15”
15”
15”
15”
18”
18”
18”
18”
18”
24”
24”
24”
24”
24”
30”
30”
30”
30”
30”
W
24”
30”
36”
42”
48”
24”
30”
36”
42”
48”
24”
30”
36”
42”
48”
24”
30”
36”
42”
48”
24”
30”
36”
42”
48”
24”
30”
36”
42”
48”
H Est Lbs. List Price
88”
72
404.10
88”
83
404.10
88”
93
419.10
88”
129
503.10
88”
139
536.30
88”
71
430.40
88”
78
437.40
88”
86
441.50
88”
112
521.00
88”
142
574.00
88”
81
478.80
88”
88
485.80
88”
113
493.40
88”
152
618.30
88”
192
777.30
88”
106
569.10
88”
116
578.30
88”
126
538.70
88”
169
682.70
88”
192
747.80
88”
130
673.50
88”
137
682.80
88”
143
643.10
88”
194
795.50
88”
217
885.60
88”
163
760.10
88”
173
769.20
88”
182
729.80
88”
225
880.70
88”
263
983.00
All shelves are placed on 12" centers for 11-1/4" clear vertical height. Shelf supports are adjustable on 1-1/2" centers.Shelves are slotted to accept dividers and includes Slotted Center and/or Back Stops as needed. Closed backs are sold separately, refer to page 43.
ADDER
D
9”
9”
9”
9”
9”
12”
12”
12”
12”
12”
15”
15”
15”
15”
15”
18”
18”
18”
18”
18”
24”
24”
24”
24”
24”
30”
30”
30”
30”
30”
W
24”
30”
36”
42”
48”
24”
30”
36”
42”
48”
24”
30”
36”
42”
48”
24”
30”
36”
42”
48”
24”
30”
36”
42”
48”
24”
30”
36”
42”
48”
H
88”
88”
88”
88”
88”
88”
88”
88”
88”
88”
88”
88”
88”
88”
88”
88”
88”
88”
88”
88”
88”
88”
88”
88”
88”
88”
88”
88”
88”
88”
Est Lbs. List Price
83
444.20
96
444.20
108
457.70
140
535.80
147
566.50
90
482.70
97
489.40
122
496.10
153
573.10
161
615.80
102
537.10
109
543.70
134
550.50
173
666.10
213
813.30
129
630.50
139
639.00
149
602.40
192
735.60
215
795.90
156
751.90
163
760.50
169
723.90
220
864.80
243
948.30
197
857.00
204
865.60
216
828.80
259
968.70
297
1,063.30
Item #
880924-A7LS
880930-A7LS
880936-A7LS
880942-A7LS
880948-A7LS
881224-A7LS
881230-A7LS
881236-A7LS
881242-A7LS
881248-A7LS
881524-A7LS
881530-A7LS
881536-A7LS
881542-A7LS
881548-A7LS
881824-A7LS*
881830-A7LS*
881836-A7LS*
881842-A7LS**
881848-A7LS**
882424-A7LS*
882430-A7LS*
882436-A7LS*
882442-A7LS**
882448-A7LS**
883024-A7LS*
883030-A7LS*
883036-A7LS*
883042-A7LS**
883048-A7LS**
Starter
Adder
All units ship knocked down and bulk packed.
**Includes one shelf reinforcement per shelf.
**Includes two shelf reinforcements per shelf.
Shelf reinforcements are not included for top shelf.
Top shelves are unslotted and include prepunched knockout holes for TrakSlider hardware attachment.
All starter units include 2 closed “L” uprights and all adder units include 1 closed “T” upright.
All units include 64-1/4" high uprights, and 2" high front base.
Shelves are 22 gauge designed, but not limited to, book storage. 18 gauge shelves are available, contact
factory for more information. Used FDB dividers to 9" deep shelving, FDL dividers for all other sizes.
TEL: 800-828-8018
www.datumfiling.com • sales@datumfiling.com
14
D
9”
9”
9”
9”
9”
12”
12”
12”
12”
12”
15”
15”
15”
15”
15”
18”
18”
18”
18”
18”
24”
24”
24”
24”
24”
30”
30”
30”
30”
30”
W
24”
30”
36”
42”
48”
24”
30”
36”
42”
48”
24”
30”
36”
42”
48”
24”
30”
36”
42”
48”
24”
30”
36”
42”
48”
24”
30”
36”
42”
48”
H Est Lbs. List Price
88”
72
404.10
88”
83
404.10
88”
93
419.10
88”
129
503.10
88”
136
536.30
88”
71
430.40
88”
78
437.40
88”
86
441.50
88”
112
521.00
88”
143
574.00
88”
81
478.80
88”
88
485.80
88”
113
493.40
88”
152
618.30
88”
192
777.30
88”
106
569.10
88”
116
578.30
88”
126
538.70
88”
169
682.70
88”
192
747.80
88”
130
673.50
88”
137
682.80
88”
143
643.10
88”
194
795.50
88”
217
885.60
88”
163
760.10
88”
173
769.20
88”
182
729.80
88”
225
880.70
88”
263
983.00
FOR MOBILE READY SHELVING
Add “M” to the end of the model number when ordering mobile ready shelving. For
example: 641224-A5M
Single rivet shelf supports replace front Kick Plate and standard support on bottom
shelf allowing for easy attachment to mobile carriages.
Holes are prepunched into single rivet support to match up with corresponding holes
on Datum TrakSlider carriages.
When ordering mobile ready shelving to be used in conjunction with Datum TrakSlider
Systems please refer to page 65 for additional hardware needs.
EFFECTIVE FEBRUARY 1, 2012
Prices and specifications subject to change without notice.
X-Ray Shelving General Information & Specifications
X-Ray Siz
e Media:
8 pound
s per filin
g
inch
GENERAL INFORMATION
Product Description: Datum X-Ray Storage Shelving offers exceptional strength and durability making it an ideal choice
for heavyweight X-Ray jacket applications. 4Post Shelving incorporates both “L” & “T” shaped uprights allowing for a
variety of shelving configurations. Interlocking key-hole uprights combined with double rivet shelf supports are designed
to offer maximum strength and durability with ­exceptional versatility. All shelf units are assembled without the use of
nuts, bolts, or clips and are available for both single entry (wall unit) and double entry (back to back storage) allowing
for maximum filing/storage capacity with minimal floor intrusion. Shelves are available ­slotted to accept adjustable file
dividers. All shelf units are designed for expansion and are available as mobile ready for easy conversion to Datum
TrakSlider Systems. Datum 4Post Shelving is ready to assemble with no special tools required.
SPECIFICATIONS
Open Uprights: Are 18 gauge cold rolled steel, roll formed into a 2" wide “T” upright with keyhole slot holes punched
on 1-1/2" centers on inner wall of upright only. There are no holes on the exterior portion of the upright. Front and rear
posts are joined together with a minimum of three 3" high 18 gauge spacers maintaining proper upright spacing along
the entire length of the upright and adds rigidity and strength. The open “L” upright is typically used for row ends with
Open “T” uprights used as a common upright between shelf units. All uprights include an identifiable pair of punched
holes every 6" on center allowing a visual confirmation for proper shelf spacing.
Closed Uprights: Includes same specifications as the Open Uprights except welded spacers are replaced with a welded
24 gauge full height closure sheet incorporating a 5/8" wide stiffener flange at the bottom of the closure sheet.
X-Ray Shelves: Shelves are formed of 18 gauge cold rolled steel with a 1-1/8" flange on all sides. Front and Back shelf
sides to include a 9/32"
stiffener flange for added strength. Shelves are available plain or with slots punched on 2" centers to accept adjustable
file dividers.
TrakSlider Standard Duty Tops: Tops are formed of 18 gauge cold rolled steel with a 1-1/8" flange on all sides. Front
and Back top sides to include a 9/32" stiffener flange for added strength. All tops are prepunched with knock-outs to
accept TrakSlider overhead anti-tip mounting hardware.
Heavy Duty Shelf Support: Shelf supports are formed of 11 or 14 gauge (11 gauge for 42" and 48" widths) hot rolled
pickled steel 1-1/8" high. Each support end is formed flat and includes two shoulder rivets with 7/16" diameter heads
for attachment to corresponding key holes in upright. Shelf supports are available with single or double rivets. All single
rivet shelf supports are designed to sit flush with bottom of shelf upright and are prepunched to align with holes on
Datum TrakSlider carriages for easy attachment.
Heavy Duty Shelf Reinforcement: Shelf reinforcements are formed of 13 gauge hot rolled, pickled steel and formed
into a channel shape. Shelf reinforcements are notched on each end and align with respective shelf support.
Slotted X-Ray Back Stops: Back stops are formed of 18 gauge cold rolled steel with a 7/16" channel at the top
and similar bend at the bottom and are slotted on the face. Slots on Back stops are punched on same centers as the
shelf and are used to accept back tab of adjustable file divider. Ends of Back stop include one shoulder rivet with 7/16"
diameter head for attachment to corresponding keyholes in upright. Back stops are used for single entry shelving only.
Slotted X-Ray Center Stops: Center stops are formed of 18 gauge cold rolled steel with a 9/16" formed channel on
the top and a 9/16" return bend on the bottom. Formed channels on the top are punched on same centers as the shelf
and are used for back to back support of adjustable divider. The overall height of center stop is 7" and includes mounting
holes on bottom flange for easy assembly using 1/4" nuts and bolts. Center stops are used for double entry shelving
only.
Kick Plate: Kick Plates are formed of 14 or 16 gauge cold rolled steel formed with a stiffener flange on top and bottom
edge. Kick Plates are available in 2" and 4" heights.
Adjustable File Dividers: X-Ray dividers are formed from 18 gauge cold rolled steel. Dividers are punched to include
two tabs on the base and one located on the rear. X-Ray file dividers can be used with X-Ray Back and Center stops only.
Sectional Backs: Sectional backs are formed of 22 gauge cold rolled steel, positioned on the inner rear post, and are
securely held in place by a formed retainer flange positioned between the shelf support and post. Each back section will
include a formed channel on the top and bottom and include punched holes for joining sections together. Backs of 40"
high are one-piece, 64" high are two-piece, and up to 97" are of three-piece construction. Sectional back panels will add
3/8" to overall depth of shelving.
Finish: All steel parts are thoroughly cleaned using a three-stage iron phosphate washer and then
coated with an Epoxy-Hybrid powder coat finish using a state-of-the-art electrostatic paint system.
Powder coating provides a superior, attractive, uniform finish that is more durable, scratch and
corrosion resistant, and environmentally friendly than liquid paint.
FOR ADDITIONAL INFORMATION ON ORDERING, TERMS AND CONDITIONS,
PRICING AND SHIPPING, REFER TO PAGE i.
TEL: 800-828-8018
www.datumfiling.com • sales@datumfiling.com
15
EFFECTIVE FEBRUARY 1, 2012
Prices and specifications subject to change without notice.
Preconfigured X-Ray
X-Ray Siz
e Media:
8 pound
s per filin
g
inch
ALL PRECONFIGURED UNITS DO NOT INCLUDE DIVIDERS. PLEASE REFER TO PAGE 44
FOR DIVIDER INFORMATION.
All units include 85-1/4" high uprights, and 2" high front base.
Starter
Adder
85" High, 6 Shelves, 5 Openings
All shelves are placed on 16-1/2" centers for 15-1/4" clear vertical height. Shelf supports
are adjustable on 1-1/2" centers.
STARTER
X
R
A
Y
Item #
851824-S5**
851830-S5**
851836-S5**
851842-S5**
851848-S5**
853624-S5**
853630-S5**
853636-S5**
853642-S5†
853648-S5§
ADDER
D
18”
18”
18”
18”
18”
36”
36”
36”
36”
36”
W
24”
30”
36”
42”
48”
24”
30”
36”
42”
48”
H
Est Lbs.
85-1/4”
95
85-1/4”
121
85-1/4”
147
85-1/4”
175
85-1/4”
194
85-1/4”
222
85-1/4”
260
85-1/4”
273
85-1/4”
314
85-1/4”
356
List Price
555.90
571.00
610.70
666.10
730.40
896.50
923.30
975.20
1,098.20
1,232.10
X
R
A
Y
Item #
851824-A5**
851830-A5**
851836-A5**
851842-A5**
851848-A5**
853624-A5**
853630-A5**
853636-A5**
853642-A5†
853648-A5§
D
18”
18”
18”
18”
18”
36”
36”
36”
36”
36”
W
24”
30”
36”
42”
48”
24”
30”
36”
42”
48”
H
Est Lbs. List Price
85-1/4”
82
479.20
85-1/4”
107
494.60
85-1/4”
132
540.10
85-1/4”
161
596.50
85-1/4”
179
653.80
85-1/4”
194
776.30
85-1/4”
232
802.90
85-1/4”
248
855.00
85-1/4”
284
977.80
85-1/4”
328
1,111.60
All units include 88-1/4" high uprights, and 2" high front base.
Starter
Adder
88" High, 6 Shelves, 5 Openings
All shelves are placed on 16-1/2" centers for 15-1/4" clear vertical height. Shelf supports
are adjustable on 1-1/2" centers.
STARTER
X
R
A
Y
Item #
881824-S5**
881830-S5**
881836-S5**
881842-S5**
881848-S5**
883624-S5**
883630-S5**
883636-S5**
883642-S5†
883648-S5§
ADDER
D
18”
18”
18”
18”
18”
36”
36”
36”
36”
36”
W
24”
30”
36”
42”
48”
24”
30”
36”
42”
48”
H
Est Lbs.
85-1/4”
97
85-1/4”
123
85-1/4”
149
85-1/4”
178
85-1/4”
198
85-1/4”
150
85-1/4”
221
85-1/4”
279
85-1/4”
318
85-1/4”
360
List Price
556.20
571.30
617.10
673.30
730.80
926.80
978.90
988.40
1,101.90
1,235.50
All units ship knocked down and bulk packed.
**Includes two shelf reinforcements per shelf.
†Includes three shelf reinforcements per shelf.
§Includes four shelf reinforcements per shelf.
Shelf reinforcements are not included for top shelf.
All starter units include 2 closed “L” uprights and all adder units include 1 closed “T” upright.
Shelves are 18 gauge designed for X-Ray file jacket storage.
Top shelves are unslotted and include prepunched knockout holes for TrakSlider hardware
attachment.
TEL: 800-828-8018
www.datumfiling.com • sales@datumfiling.com
X
R
A
Y
Item #
881824-A5**
881830-A5**
881836-A5**
881842-A5**
881848-A5**
883624-A5**
883630-A5**
883636-A5**
883642-A5†
883648-A5§
D
18”
18”
18”
18”
18”
36”
36”
36”
36”
36”
W
24”
30”
36”
42”
48”
24”
30”
36”
42”
48”
H
Est Lbs. List Price
85-1/4”
82
484.60
85-1/4”
108
494.90
85-1/4”
134
540.40
85-1/4”
162
596.70
85-1/4”
181
654.20
85-1/4”
174
779.20
85-1/4”
212
806.10
85-1/4”
250
857.90
85-1/4”
289
980.80
85-1/4”
331
1,114.80
FOR MOBILE READY SHELVING
Add “M” to the end of the model number when order mobile ready shelving. For example:
881824-A5M
Single rivet shelf supports replace front Kick Plate and standard support on bottom shelf
allowing for easy attachment to mobile carriages.
Holes are prepunched into single rivet support to match up with corresponding holes on
Datum TrakSlider carriages.
When ordering mobile ready shelving to be used in conjunction with Datum TrakSlider
Systems please refer to page 65 for additional hardware needs.
16
EFFECTIVE FEBRUARY 1, 2012
Prices and specifications subject to change without notice.
Heavy-Duty Plus General Information & Specifications
ALL PRECONFIGURED UNITS DO NOT INCLUDE DIVIDERS. PLEASE REFER
TO PAGE 80 FOR DIVIDER INFORMATION.
All-Purpose Storage
Archival Storage 40-45
pounds per box
(12"W x 15"D x 10-1/2"H)
GENERAL INFORMATION
Product Description: Datum Heavy Duty Shelving offers exceptional strength and durability for a variety of storage
applications. 4Post shelving incorporates both “L” & “T” shaped uprights allowing for a variety of shelving configurations.
Interlocking keyhole uprights ­combined with double rivet shelf supports are designed to offer maximum strength and
durability with exceptional versatility. All shelf units are assembled without the use of nuts, bolts, or clips and are
available for both single entry (wall unit) and double entry (back to back storage) allowing for maximum filing/storage
capacity with minimal floor intrusion. All shelf units are designed for expansion and are available as mobile ready for
easy conversion to Datum TrakSlider Systems. Datum 4Post Shelving is ready to assemble with no special tools required.
Available depths make it an ideal choice bulk storage application.
SPECIFICATIONS
Open Uprights: Are 18 gauge cold rolled steel, roll formed into a 2" wide “T” upright with keyhole slot holes punched
on 1-1/2" centers on inner wall of upright only. There are no holes on the exterior portion of the upright. Front and rear
posts are joined together with a minimum of three 3" high 18 gauge spacers maintaining proper upright spacing along
the entire length of the upright and adds rigidity and strength. The open “L” upright is typically used for row ends with
Open “T” uprights used as a common upright between shelf units. All uprights include an identifiable pair of punched
holes every 6" on center allowing a visual confirmation for proper shelf spacing.
Closed Uprights: Includes same specifications as the Open Uprights except welded spacers are replaced with a welded
24 gauge full height closure sheet incorporating a 5/8' wide stiffener flange at the bottom of the closure sheet.
Heavy Duty Shelves: Shelves are formed of 18 gauge cold rolled steel with a 1-1/8" flange on all sides. Front and Back
shelf sides to include a 9/32" stiffener flange for added strength. Shelves are available plain or with slots punched on 2"
centers to accept adjustable file dividers.
TrakSlider Standard Duty Tops: Tops are formed of 18 gauge cold rolled steel with a 1-1/8" flange on all sides. Front
and Back top sides to include a 9/32" stiffener flange for added strength. All tops are prepunched with knock-outs to
accept TrakSlider overhead anti-tip mounting hardware.
Heavy Duty Shelf Support: Shelf supports are formed of 11 or 14 gauge (11 gauge on 42" & 48" widths only) hot
rolled pickled steel 1-1/8" high. Each "support end is formed flat and includes two shoulder rivets with 7/16" diameter
heads for attachment to corresponding keyholes in upright. Shelf supports are available with single or double rivets. All
single rivet shelf supports are designed to sit flush with bottom of shelf upright and are prepunched to align with holes
on Datum TrakSlider carriages for easy attachment.
Heavy Duty Shelf Reinforcement: Shelf reinforcements are formed of 13 gauge hot rolled, pickled steel and formed
into a channel shape. Shelf reinforcements are notched on each end and align with respective shelf support.
Unslotted Center Divider: Unslotted center dividers are formed of 18 gauge cold rolled steel with a 9/16" formed
channel on the top and a 9/16" return bend on the bottom. The overall height of center stop is 4" and includes mounting
holes on bottom flange for easy assembly using 7/32" nuts and bolts. Center stops are used for unslotted double entry
shelving only. Kick Plate: Kick Plates are formed of 14 or 16 gauge cold rolled steel formed with a stiffener flange on top and bottom
edge. Kick Plates are available in 2" and 4" heights.
Sectional Backs: Sectional backs are formed of 20 gauge cold rolled steel, positioned on the inner rear post, and are
securely held in place by a formed retainer flange positioned between the shelf support and post. Each back section will
include a formed channel on the top and bottom and include punched holes for joining sections together. Backs of 40"
high are one-piece, 64" high are two-piece, and up to 97" are of three-piece construction. Sectional back panels will add
3/8" to overall depth of shelving.
Finish: All steel parts are thoroughly cleaned using a three-stage iron phosphate washer and then
coated with an Epoxy-Hybrid powder coat finish using a state-of-the-art electrostatic paint system.
Powder coating provides a superior, attractive, uniform finish that is more durable, scratch and
corrosion resistant, and environmentally friendly than liquid paint.
FOR ADDITIONAL INFORMATION ON ORDERING, TERMS AND CONDITIONS,
PRICING AND SHIPPING, REFER TO PAGE i.
TEL: 800-828-8018
www.datumfiling.com • sales@datumfiling.com
17
EFFECTIVE FEBRUARY 1, 2012
Prices and specifications subject to change without notice.
Preconfigured 88-1/4" High, 18 Gauge
All-Purpose Storage
ALL PRECONFIGURED UNITS BELOW HAVE UNSLOTTED SHELVING.
5 Shelves, 4 Openings
(19-3/4" clear height per opening)
ADDER
STARTER
Item #
881224-S4H
881230-S4H
881236-S4H
881242-S4H
881248-S4H
881524-S4H
881530-S4H
881536-S4H
881542-S4H
881548-S4H
881824-S4H
881830-S4H
881836-S4H
881842-S4H
881848-S4H
882424-S4H*
882430-S4H*
882436-S4H*
882442-S4H*
882448-S4H*
883024-S4H*
883030-S4H*
883036-S4H*
883042-S4H*
883048-S4H*
883624-S4H*
883630-S4H*
883636-S4H*
883642-S4H*
883648-S4H*
D
12”
12”
12”
12”
12”
15”
15”
15”
15”
15”
18”
18”
18”
18”
18”
24”
24”
24”
24”
24”
30”
30”
30”
30”
30”
36”
36”
36”
36”
36”
W
24”
30”
36”
42”
48”
24”
30”
36”
42”
48”
24”
30”
36”
42”
48”
24”
30”
36”
42”
48”
24”
30”
36”
42”
48”
24”
30”
36”
42”
48”
H
Est Lbs. List Price
88-1/4”
73
324.20
88-1/4”
89
330.00
88-1/4”
107
359.70
88-1/4”
127
397.30
88-1/4”
130
425.60
88-1/4”
100
394.60
88-1/4”
112
400.40
88-1/4”
126
427.00
88-1/4”
142
461.20
88-1/4”
155
508.10
88-1/4”
107
431.70
88-1/4”
121
437.20
88-1/4”
137
468.00
88-1/4”
155
510.90
88-1/4”
169
561.30
88-1/4”
130
537.10
88-1/4”
148
542.70
88-1/4”
168
573.40
88-1/4”
190
640.00
88-1/4”
203
700.70
88-1/4”
146
645.40
88-1/4”
168
651.10
88-1/4”
192
681.90
88-1/4”
218
742.70
88-1/4”
233
800.20
88-1/4”
173
722.90
88-1/4”
181
741.60
88-1/4”
198
760.20
88-1/4”
215
848.50
88-1/4”
240
928.00
6 Shelves, 5 Openings
Item #
881224-A4H
881230-A4H
881236-A4H
881242-A4H
881248-A4H
881524-A4H
881530-A4H
881536-A4H
881542-A4H
881548-A4H
881824-A4H
881830-A4H
881836-A4H
881842-A4H
881848-A4H
882424-A4H*
882430-A4H*
882436-A4H*
882442-A4H*
882448-A4H*
883024-A4H*
883030-A4H*
883036-A4H*
883042-A4H*
883048-A4H*
883624-A4H*
883630-A4H*
883636-A4H*
883642-A4H*
883648-A4H*
Starter
Adder
D
12”
12”
12”
12”
12”
15”
15”
15”
15”
15”
18”
18”
18”
18”
18”
24”
24”
24”
24”
24”
30”
30”
30”
30”
30”
36”
36”
36”
36”
36”
W
24”
30”
36”
42”
48”
24”
30”
36”
42”
48”
24”
30”
36”
42”
48”
24”
30”
36”
42”
48”
24”
30”
36”
42”
48”
24”
30”
36”
42”
48”
H
88-1/4”
88-1/4”
88-1/4”
88-1/4”
88-1/4”
88-1/4”
88-1/4”
88-1/4”
88-1/4”
88-1/4”
88-1/4”
88-1/4”
88-1/4”
88-1/4”
88-1/4”
88-1/4”
88-1/4”
88-1/4”
88-1/4”
88-1/4”
88-1/4”
88-1/4”
88-1/4”
88-1/4”
88-1/4”
88-1/4”
88-1/4”
88-1/4”
88-1/4”
88-1/4”
Est Lbs. List Price
34
266.80
46
272.50
60
302.00
76
339.80
85
368.10
58
329.50
66
335.20
76
361.80
88
396.10
97
443.00
65
355.00
74
360.60
85
391.40
98
434.40
108
484.70
79
439.30
93
445.10
109
475.90
127
542.30
135
603.10
92
544.30
110
549.80
130
580.70
152
641.60
162
699.00
149
601.90
157
620.80
174
639.20
191
727.50
216
806.90
D
12”
12”
12”
12”
12”
15”
15”
15”
15”
15”
18”
18”
18”
18”
18”
24”
24”
24”
24”
24”
30”
30”
30”
30”
30”
36”
36”
36”
36”
36”
W
24”
30”
36”
42”
48”
24”
30”
36”
42”
48”
24”
30”
36”
42”
48”
24”
30”
36”
42”
48”
24”
30”
36”
42”
48”
24”
30”
36”
42”
48”
H
Est Lbs.
88-1/4”
38
88-1/4”
53
88-1/4”
70
88-1/4”
89
88-1/4”
87
88-1/4”
64
88-1/4”
75
88-1/4”
88
88-1/4”
103
88-1/4”
113
88-1/4”
75
88-1/4”
86
88-1/4”
99
88-1/4”
114
88-1/4”
127
88-1/4”
92
88-1/4”
109
88-1/4”
128
88-1/4”
149
88-1/4”
159
88-1/4”
104
88-1/4”
127
88-1/4”
152
88-1/4”
179
88-1/4”
191
88-1/4”
173
88-1/4”
182
88-1/4”
202
88-1/4”
222
88-1/4”
252
(15-1/4" clear height per opening)
ADDER
STARTER
Item #
881224-S5H
881230-S5H
881236-S5H
881242-S5H
881248-S5H
881524-S5H
881530-S5H
881536-S5H
881542-S5H
881548-S5H
881824-S5H
881830-S5H
881836-S5H
881842-S5H
881848-S5H
882424-S5H*
882430-S5H*
882436-S5H*
882442-S5H*
882448-S5H*
883024-S5H*
883030-S5H*
883036-S5H*
883042-S5H*
883048-S5H*
883624-S5H*
883630-S5H*
883636-S5H*
883642-S5H*
883648-S5H*
Archival Storage 40-45
pounds per box
(12"W x 15"D x 10-1/2"H)
D
12”
12”
12”
12”
12”
15”
15”
15”
15”
15”
18”
18”
18”
18”
18”
24”
24”
24”
24”
24”
30”
30”
30”
30”
30”
36”
36”
36”
36”
36”
W
24”
30”
36”
42”
48”
24”
30”
36”
42”
48”
24”
30”
36”
42”
48”
24”
30”
36”
42”
48”
24”
30”
36”
42”
48”
24”
30”
36”
42”
48”
H
Est Lbs. List Price
88-1/4”
74
359.10
88-1/4”
94
365.90
88-1/4”
116
401.50
88-1/4”
140
446.80
88-1/4”
152
480.70
88-1/4”
106
441.00
88-1/4”
121
447.70
88-1/4”
138
479.90
88-1/4”
157
520.60
88-1/4”
171
577.10
88-1/4”
117
481.80
88-1/4”
133
488.60
88-1/4”
151
525.40
88-1/4”
171
577.10
88-1/4”
188
637.50
88-1/4”
143
601.20
88-1/4”
164
608.00
88-1/4”
187
644.70
88-1/4”
212
724.50
88-1/4”
227
797.60
88-1/4”
158
726.90
88-1/4”
185
733.60
88-1/4”
214
770.50
88-1/4”
245
843.60
88-1/4”
262
912.70
88-1/4”
197
813.40
88-1/4”
206
835.80
88-1/4”
226
858.10
88-1/4”
246
964.10
88-1/4”
276
1,059.30
TEL: 800-828-8018
www.datumfiling.com • sales@datumfiling.com
Item #
881224-A5H
881230-A5H
881236-A5H
881242-A5H
881248-A5H
881524-A5H
881530-A5H
881536-A5H
881542-A5H
881548-A5H
881824-A5H
881830-A5H
881836-A5H
881842-A5H
881848-A5H
882424-A5H*
882430-A5H*
882436-A5H*
882442-A5H*
882448-A5H*
883024-A5H*
883030-A5H*
883036-A5H*
883042-A5H*
883048-A5H*
883624-A5H*
883630-A5H*
883636-A5H*
883642-A5H*
883648-A5H*
Starter
Adder
18
List Price
301.80
308.40
344.00
389.20
423.20
375.80
382.40
414.60
455.50
511.90
405.30
412.10
449.00
500.50
560.70
503.40
510.30
547.20
627.00
699.90
625.70
632.50
669.50
742.50
811.40
692.40
714.70
737.20
843.00
938.60
EFFECTIVE FEBRUARY 1, 2012
Prices and specifications subject to change without notice.
Preconfigured 88-1/4" High, 18 Gauge
All-Purpose Storage
ALL PRECONFIGURED UNITS BELOW HAVE UNSLOTTED SHELVING.
7 Shelves, 6 Openings
Archival Storage 40-45
pounds per box
(12"W x 15"D x 10-1/2"H)
(12-1/4" clear height per opening)
STARTER
ADDER
Item #
881224-S6H
881230-S6H
881236-S6H
881242-S6H
881248-S6H
881524-S6H
881530-S6H
881536-S6H
881542-S6H
881548-S6H
881824-S6H
881830-S6H
881836-S6H
881842-S6H
881848-S6H
882424-S6H*
882430-S6H*
882436-S6H*
882442-S6H*
882448-S6H*
883024-S6H*
883030-S6H*
883036-S6H*
883042-S6H*
883048-S6H*
883624-S6H*
883630-S6H*
883636-S6H*
883642-S6H*
883648-S6H*
D
12”
12”
12”
12”
12”
15”
15”
15”
15”
15”
18”
18”
18”
18”
18”
24”
24”
24”
24”
24”
30”
30”
30”
30”
30”
36”
36”
36”
36”
36”
W
24”
30”
36”
42”
48”
24”
30”
36”
42”
48”
24”
30”
36”
42”
48”
24”
30”
36”
42”
48”
24”
30”
36”
42”
48”
24”
30”
36”
42”
48”
H
Est Lbs.
88-1/4”
96
88-1/4”
110
88-1/4”
126
88-1/4”
144
88-1/4”
154
88-1/4”
114
88-1/4”
131
88-1/4”
150
88-1/4”
171
88-1/4”
187
88-1/4”
127
88-1/4”
145
88-1/4”
165
88-1/4”
187
88-1/4”
206
88-1/4”
156
88-1/4”
180
88-1/4”
206
88-1/4”
234
88-1/4”
250
88-1/4”
173
88-1/4”
204
88-1/4”
237
88-1/4”
272
88-1/4”
291
88-1/4”
221
88-1/4”
231
88-1/4”
254
88-1/4”
277
88-1/4”
312
List Price
394.10
401.80
443.30
496.20
535.90
487.10
495.10
532.60
580.00
646.00
531.90
539.90
583.10
643.10
713.50
665.10
673.10
716.20
809.10
894.30
808.20
816.10
859.30
944.30
1,024.80
903.80
929.90
956.00
1,079.70
1,190.80
Starter
All units ship knocked down and bulk packed.
*Includes one shelf reinforcement per shelf.
Shelf reinforcements are not included for top shelf.
All starter units include 2 closed “L” uprights and all adder units include 1 closed “T”
upright.
All units include 88-1/4" high uprights.
Shelves are 18 gauge.
Top shelves are unslotted and include prepunched knockout holes for TrakSlider hardware attachment.
TEL: 800-828-8018
www.datumfiling.com • sales@datumfiling.com
Adder
Item #
881224-A6H
881230-A6H
881236-A6H
881242-A6H
881248-A6H
881524-A6H
881530-A6H
881536-A6H
881542-A6H
881548-A6H
881824-A6H
881830-A6H
881836-A6H
881842-A6H
881848-A6H
882424-A6H*
882430-A6H*
882436-A6H*
882442-A6H*
882448-A6H*
883024-A6H*
883030-A6H*
883036-A6H*
883042-A6H*
883048-A6H*
883624-A6H*
883630-A6H*
883636-A6H*
883642-A6H*
883648-A6H*
D
12”
12”
12”
12”
12”
15”
15”
15”
15”
15”
18”
18”
18”
18”
18”
24”
24”
24”
24”
24”
30”
30”
30”
30”
30”
36”
36”
36”
36”
36”
W
24”
30”
36”
42”
48”
24”
30”
36”
42”
48”
24”
30”
36”
42”
48”
24”
30”
36”
42”
48”
24”
30”
36”
42”
48”
24”
30”
36”
42”
48”
H
Est Lbs. List Price
88-1/4”
41
336.60
88-1/4”
59
344.40
88-1/4”
79
385.80
88-1/4”
101
438.70
88-1/4”
114
478.50
88-1/4”
72
421.80
88-1/4”
85
430.00
88-1/4”
100
467.10
88-1/4”
117
515.00
88-1/4”
129
580.70
88-1/4”
83
455.50
88-1/4”
97
463.30
88-1/4”
113
506.60
88-1/4”
131
566.70
88-1/4”
145
637.00
88-1/4”
105
567.40
88-1/4”
125
575.50
88-1/4”
147
618.60
88-1/4”
171
711.60
88-1/4”
183
796.50
88-1/4”
121
707.10
88-1/4”
147
714.90
88-1/4”
175
758.10
88-1/4”
205
843.00
88-1/4”
220
923.70
88-1/4”
197
783.00
88-1/4”
207
808.90
88-1/4”
230
835.20
88-1/4”
253
958.80
88-1/4”
288
1,069.80
FOR MOBILE READY SHELVING
Add “M” to the end of the model number when ordering mobile ready shelving.
For example: 881224-A6HM
Single rivet shelf supports replace standard supports on bottom shelf allowing for easy
attachment to mobile carriages.
Holes are prepunched into single rivet support to match up with corresponding holes on
Datum TrakSlider carriages.
When ordering mobile ready shelving to be used in conjunction with Datum TrakSlider
Systems please refer to page 65 for additional hardware needs.
19
EFFECTIVE FEBRUARY 1, 2012
Prices and specifications subject to change without notice.
Prepackaged 4Post-In-A-Box
Letter
Media: Size
2-2 1/2
pounds
per filin
g inch
Each 4POST ITEM # below ships in one, all encompassing box which includes all
uprights, shelves, shelf supports, reinforcements (if applicable) backstops
or center stops, front base, and 3 dividers per shelf opening. For additional
PRODUCT SPECIFICATIONS PLEASE REFER TO PAGE 1 (LETTER) AND PAGE 15 (X-RAY).
All
letter prepackaged starter kits include:
2 closed “L” uprights
slotted shelves
top shelf
shelf supports
reinforcements (as noted)
backstops or centerstops
dividers
2" front Kick Plate
All
ADDER
STARTER
All
Item #
LFI
D
W
H
Est
Lbs.
List
Price
761236-S7P
238
12”
36”
76-1/4”
123
598.00
762436-S7P*
476
24”
36”
76-1/4”
204
891.50
L
E
T
T
E
R
letter prepackaged starter kits include:
2 closed “L” uprights
slotted shelves
top shelf
shelf supports
reinforcements (as noted)
backstops or centerstops
dividers
2" front Kick Plate
Item #
LFI
D
W
H
Est
Lbs.
761236-A7P
238
12”
36”
76-1/4”
107
518.70
762436-A7P*
476
24”
36”
76-1/4”
176
753.60
All
STARTER
All
letter prepackaged adder kits include:
1 open “T” upright
slotted shelves
top shelf
shelf supports
reinforcements (as noted)
backstops or centerstops
dividers
2" front Kick Plate
ADDER
Item #
LFI
D
W
H
Est
Lbs.
List
Price
881236-S8P
272
12”
36”
88-1/4”
140
675.90
882436-S8P*
544
24”
36”
88-1/4”
232
1,001.70
L
E
T
T
E
R
X-Ray prepackaged starter kits include:
2 closed “L” uprights
slotted shelves
top shelf
shelf supports
reinforcements (as noted)
backstops or centerstops
dividers
2" front Kick Plate
Item #
LFI
D
W
H
Est
Lbs.
List
Price
881236-A8P
272
12”
36”
88-1/4”
121
591.50
882436-A8P*
544
24”
36”
88-1/4”
200
855.90
All
88-1/4" High, 6 Shelves, 5 Openings
X-Ray prepackaged adder kits include:
1 closed “T” upright
slotted shelves
top shelf
shelf supports
reinforcements (as noted)
backstops or centerstops
dividers
2" front Kick Plate
88-1/4" High, 6 Shelves, 5 Openings
ADDER
STARTER
X
R
A
Y
List
Price
88-1/4" High, 9 Shelves, 8 Openings
88-1/4" High, 9 Shelves, 8 Openings
L
E
T
T
E
R
letter prepackaged adder kits include:
1 open “T” upright
slotted shelves
top shelf
shelf supports
reinforcements (as noted)
backstops or centerstops
dividers
2" front Kick Plate
76-1/4" High, 8 Shelves, 7 Openings
76-1/4" High, 8 Shelves, 7 Openings
L
E
T
T
E
R
X-Ray Siz
e Media:
8 pound
s per filin
g
inch
Item #
LFI
D
881836-S5P**
175
18”
W
H
36” 88-1/4”
Est
Lbs.
List
Price
175
834.90
X
R
A
Y
Item #
LFI
881836-A5P** 175
D
18”
W
H
36” 88-1/4”
Est
Lbs.
List
Price
160
734.20
***Includes one shelf reinforcement per shelf.
***Includes two shelf reinforcements per shelf.
TEL: 800-828-8018
www.datumfiling.com • sales@datumfiling.com
20
EFFECTIVE FEBRUARY 1, 2012
Prices and specifications subject to change without notice.
Library, Component Parts - Closed L & T Uprights
Closed "T" Uprights
Closed "L" Uprights
Item #
W
D
H
4009LCL
4012LCL
4013LCL
4015LCL
4018LCL
4020LCL
4024LCL
4026LCL
4030LCL
6409LCL
6412LCL
6413LCL
6415LCL
6418LCL
6420LCL
6424LCL
6426LCL
6430LCL
7609LCL
7612LCL
7613LCL
7615LCL
7618LCL
7620LCL
7624LCL
7626LCL
7630LCL
8509LCL
8512LCL
8513LCL
8515LCL
8518LCL
8520LCL
8524LCL
8526LCL
8530LCL
8809LCL
8812LCL
8813LCL
8815LCL
8818LCL
8820LCL
8824LCL
8826LCL
8830LCL
9709LCL
9712LCL
9713LCL
9715LCL
9718LCL
9720LCL
9724LCL
9726LCL
9730LCL
1-1/8”
1-1/8”
1-1/8”
1-1/8”
1-1/8”
1-1/8”
1-1/8”
1-1/8”
1-1/8”
1-1/8”
1-1/8”
1-1/8”
1-1/8”
1-1/8”
1-1/8”
1-1/8”
1-1/8”
1-1/8”
1-1/8”
1-1/8”
1-1/8”
1-1/8”
1-1/8”
1-1/8”
1-1/8”
1-1/8”
1-1/8”
1-1/8”
1-1/8”
1-1/8”
1-1/8”
1-1/8”
1-1/8”
1-1/8”
1-1/8”
1-1/8”
1-1/8”
1-1/8”
1-1/8”
1-1/8”
1-1/8”
1-1/8”
1-1/8”
1-1/8”
1-1/8”
1-1/8”
1-1/8”
1-1/8”
1-1/8”
1-1/8”
1-1/8”
1-1/8”
1-1/8”
1-1/8”
9”
12”
13”
15”
18”
20”
24”
26”
30”
9”
12”
13”
15”
18”
20”
24”
26”
30”
9”
12”
13”
15”
18”
20”
24”
26”
30”
9”
12”
16”
15”
18”
20”
24”
26”
30”
9”
12”
13”
15”
18”
20”
24”
26”
30”
9”
12”
13”
15”
18”
20”
24”
26”
30”
40-1/4”
40-1/4”
40-1/4”
40-1/4”
40-1/4”
40-1/4”
40-1/4”
40-1/4”
40-1/4”
64-1/4”
64-1/4”
64-1/4”
64-1/4”
64-1/4”
64-1/4”
64-1/4”
64-1/4”
64-1/4”
76-1/4”
76-1/4”
76-1/4”
76-1/4”
76-1/4”
76-1/4”
76-1/4”
76-1/4”
76-1/4”
85-1/4”
85-1/4”
85-1/4”
85-1/4”
85-1/4”
85-1/4”
85-1/4”
85-1/4”
85-1/4”
88-1/4”
88-1/4”
88-1/4”
88-1/4”
88-1/4”
88-1/4”
88-1/4”
88-1/4”
88-1/4”
97-1/4”
97-1/4”
97-1/4”
97-1/4”
97-1/4”
97-1/4”
97-1/4”
97-1/4”
97-1/4”
TOP
BOTTOM
Pcs/
Ctn
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
4
2
2
2
2
2
2
2
2
4
2
2
2
2
2
2
2
2
4
2
2
2
2
2
2
2
2
4
2
2
2
2
2
2
2
Est
Lbs.
11
12
13
15
16
17
19
20
22
17
20
21
22
24
25
29
30
35
19
21
22
23
24
25
30
31
36
22
24
25
26
28
29
36
37
45
22
25
26
27
29
30
35
38
43
25
29
30
32
35
36
42
43
50
List
Price
77.70
83.70
84.70
92.00
94.80
97.00
118.30
121.60
140.80
94.20
104.80
105.80
115.00
126.50
132.10
150.30
155.80
172.90
97.40
108.90
111.10
121.40
134.40
139.90
163.60
174.60
192.80
107.50
119.60
124.30
133.00
146.30
155.10
177.10
186.00
208.40
107.50
120.40
124.80
134.50
148.90
159.90
185.50
196.60
222.60
141.90
147.90
158.00
172.60
197.10
204.60
231.80
239.40
266.60
Item #
W
D
H
4009TCL
4012TCL
4013TCL
4015TCL
4018TCL
4020TCL
4024TCL
4026TCL
4030TCL
6409TCL
6412TCL
6413TCL
6415TCL
6418TCL
6420TCL
6424TCL
6426TCL
6430TCL
7609TCL
7612TCL
7613TCL
7615TCL
7618TCL
7620TCL
7624TCL
7626TCL
7630TCL
8509TCL
8512TCL
8513TCL
8515TCL
8518TCL
8520TCL
8524TCL
8526TCL
8530TCL
8809TCL
8812TCL
8813TCL
8815TCL
8818TCL
8820TCL
8824TCL
8826TCL
8830TCL
9709TCL
9712TCL
9713TCL
9715TCL
9718TCL
9720TCL
9724TCL
9726TCL
9730TCL
2”
2”
2”
2”
2”
2”
2”
2”
2”
2”
2”
2”
2”
2”
2”
2”
2”
2”
2”
2”
2”
2”
2”
2”
2”
2”
2”
2”
2”
2”
2”
2”
2”
2”
2”
2”
2”
2”
2”
2”
2”
2”
2”
2”
2”
2”
2”
2”
2”
2”
2”
2”
2”
2”
9”
12”
13”
15”
18”
20”
24”
26”
30”
9”
12”
13”
15”
18”
20”
24”
26”
30”
9”
12”
13”
15”
18”
20”
24”
26”
30”
9”
12”
13”
15”
18”
20”
24”
26”
30”
9”
12”
13”
15”
18”
20”
24”
26”
30”
9”
12”
13”
15”
18”
20”
24”
26”
30”
40-1/4”
40-1/4”
40-1/4”
40-1/4”
40-1/4”
40-1/4”
40-1/4”
40-1/4”
40-1/4”
64-1/4”
64-1/4”
64-1/4”
64-1/4”
64-1/4”
64-1/4”
64-1/4”
64-1/4”
64-1/4”
76-1/4”
76-1/4”
76-1/4”
76-1/4”
76-1/4”
76-1/4”
76-1/4”
76-1/4”
76-1/4”
85-1/4”
85-1/4”
85-1/4”
85-1/4”
85-1/4”
85-1/4”
85-1/4”
85-1/4”
85-1/4”
88-1/4”
88-1/4”
88-1/4”
88-1/4”
88-1/4”
88-1/4”
88-1/4”
88-1/4”
88-1/4”
97-1/4”
97-1/4”
97-1/4”
97-1/4”
97-1/4”
97-1/4”
97-1/4”
97-1/4”
97-1/4”
TOP
BOTTOM
TEL: 800-828-8018
TOP
Custom sizes are available, consult
factory for more information.
All uprights are double keyhole
punched on 1-1/2" centers.
www.datumfiling.com • sales@datumfiling.com
21
Pcs/
Ctn
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
1
1
1
1
1
1
1
1
2
1
1
1
1
1
1
1
1
2
1
1
1
1
1
1
1
1
2
1
1
1
1
1
1
1
Est
Lbs.
15
17
21
20
21
22
25
26
30
21
26
27
29
32
33
37
38
43
23
27
28
29
32
33
38
39
44
28
30
31
32
35
36
48
49
60
29
32
32
33
35
36
44
45
52
31
37
38
42
44
45
52
53
61
List
Price
94.40
105.30
108.60
115.50
125.70
132.30
141.30
146.90
156.90
117.60
126.50
132.10
141.50
156.10
165.00
189.00
205.50
221.70
130.20
134.40
138.80
150.80
172.20
180.00
200.40
211.50
233.80
136.90
149.90
154.40
165.00
179.80
205.10
222.80
233.80
265.90
139.20
149.90
155.50
167.80
185.50
207.30
232.50
235.90
279.30
170.10
192.60
200.10
213.80
235.40
251.60
285.00
291.30
334.70
TOP
BOTTOM
BOTTOM
EFFECTIVE FEBRUARY 1, 2012
Prices and specifications subject to change without notice.
Component Parts - Closed L Uprights
Item #
Pcs/ Est
Ctn Lbs.
List
Price
W
D
H
Item #
4009LC
1-1/8”
9”
40-1/4”
6
7
41.60
8509LC
4012LC
1-1/8” 12” 40-1/4”
6
8
44.90
8512LC
W
Pcs/ Est
Ctn Lbs.
List
Price
D
H
1-1/8”
9”
85-1/4”
6
14
69.00
1-1/8”
12”
85-1/4”
6
15
74.90
4013LC
1-1/8” 13” 40-1/4”
6
9
46.30
8513LC
1-1/8”
13”
85-1/4”
6
16
77.10
4015LC
1-1/8” 15” 40-1/4”
6
9
48.80
8515LC
1-1/8”
15”
85-1/4”
6
17
81.60
4016LC
1-1/8” 16” 40-1/4”
6
10
52.90
8516LC
1-1/8”
16”
85-1/4”
6
18
89.40
4018LC
1-1/8” 18” 40-1/4”
4
10
53.60
8518LC
1-1/8”
18”
85-1/4”
4
19
89.90
4020LC
1-1/8” 20” 40-1/4”
4
11
55.80
8520LC
1-1/8”
20”
85-1/4”
4
20
95.30
4024LC
1-1/8” 24” 40-1/4”
4
12
59.10
8524LC
1-1/8”
24”
85-1/4”
4
23
106.60
4026LC
1-1/8” 26” 40-1/4”
4
13
62.40
8526LC
1-1/8”
26”
85-1/4”
4
24
111.40
4030LC
1-1/8” 30” 40-1/4”
4
14
69.80
8530LC
1-1/8”
30”
85-1/4”
4
27
121.10
4032LC
1-1/8” 32” 40-1/4”
4
15
74.40
8532LC
1-1/8”
32”
85-1/4”
4
29
136.30
4036LC
1-1/8” 36” 40-1/4”
4
16
75.20
8536LC
1-1/8”
36”
85-1/4”
4
30
137.00
6409LC
1-1/8”
6
11
57.10
8809LC
1-1/8”
9”
88-1/4”
6
15
71.00
9”
64-1/4”
6412LC
1-1/8” 12” 64-1/4”
6
12
62.30
8812LC
1-1/8”
12”
88-1/4”
6
16
75.10
6413LC
1-1/8” 13” 64-1/4”
6
13
64.50
8813LC
1-1/8”
13”
88-1/4”
6
17
77.30
6415LC
1-1/8” 15” 64-1/4”
6
14
68.60
8815LC
1-1/8”
15”
88-1/4”
6
17
81.70
6416LC
1-1/8” 16” 64-1/4”
6
15
73.10
8816LC
1-1/8”
16”
88-1/4”
6
19
89.60
6418LC
1-1/8” 18” 64-1/4”
4
16
73.70
8818LC
1-1/8”
18”
88-1/4”
4
20
90.20
6420LC
1-1/8” 20” 64-1/4”
4
16
77.10
8820LC
1-1/8”
20”
88-1/4”
4
21
96.80
6424LC
1-1/8” 24” 64-1/4”
4
19
82.40
8824LC
1-1/8”
24”
88-1/4”
4
24
110.60
6426LC
1-1/8” 26” 64-1/4”
4
20
86.80
8826LC
1-1/8”
26”
88-1/4”
4
25
115.00
6430LC
1-1/8” 30” 64-1/4”
4
21
97.10
8830LC
1-1/8”
30”
88-1/4”
4
27
122.10
6432LC
1-1/8” 32” 64-1/4”
4
23
108.20
8832LC
1-1/8”
32”
88-1/4”
4
30
138.20
6436LC
1-1/8” 36” 64-1/4”
4
24
108.90
8836LC
1-1/8”
36”
88-1/4”
4
31
138.70
7609LC
1-1/8”
76-1/4”
6
12
63.70
9709LC
1-1/8”
9”
97-1/4”
6
17
88.30
7612LC
1-1/8” 12” 76-1/4”
9”
6
14
66.40
9712LC
1-1/8”
12”
97-1/4”
6
18
96.60
7613LC
1-1/8” 13” 76-1/4”
6
15
68.60
9713LC
1-1/8”
13”
97-1/4”
6
19
100.40
7615LC
1-1/8” 15” 76-1/4”
6
15
72.50
9715LC
1-1/8”
15”
97-1/4”
6
21
106.70
7616LC
1-1/8” 16” 76-1/4”
6
16
78.80
9716LC
1-1/8”
16”
97-1/4”
6
22
115.20
7618LC
1-1/8” 18” 76-1/4”
4
17
79.50
9718LC
1-1/8”
18”
97-1/4”
4
23
115.90
7620LC
1-1/8” 20” 76-1/4”
4
18
84.00
9720LC
1-1/8”
20”
97-1/4”
4
24
119.70
7624LC
1-1/8” 24” 76-1/4”
4
21
93.60
9724LC
1-1/8”
24”
97-1/4”
4
27
135.20
7626LC
1-1/8” 26” 76-1/4”
4
22
99.10
9726LC
1-1/8”
26”
97-1/4”
4
28
139.00
7630LC
1-1/8” 30” 76-1/4”
4
24
110.60
9730LC
1-1/8”
30”
97-1/4”
4
31
154.60
7632LC
1-1/8” 32” 76-1/4”
4
27
122.90
9732LC
1-1/8”
32”
97-1/4”
4
34
173.40
7636LC
1-1/8” 36” 76-1/4”
4
28
123.70
9736LC
1-1/8”
36”
97-1/4”
4
35
174.30
TOP
BOTTOM
Custom sizes are available, consult factory for more information.
All uprights are double keyhole punched on 1-1/2" centers.
TEL: 800-828-8018
www.datumfiling.com • sales@datumfiling.com
22
EFFECTIVE FEBRUARY 1, 2012
Prices and specifications subject to change without notice.
Component Parts - Closed T Uprights
Item #
W
D
H
Pcs/
Ctn
Est
Lbs.
List
Price
Item #
W
D
H
Pcs/
Ctn
Est
Lbs.
List
Price
4009TC
2”
9”
40-1/4”
6
9
48.30
8509TC
2”
9”
85-1/4”
6
19
84.00
4012TC
2”
12”
40-1/4”
4
10
52.10
8512TC
2”
12”
85-1/4”
4
20
90.70
4013TC
2”
13”
40-1/4”
4
11
53.10
8513TC
2”
13”
85-1/4”
4
21
92.90
4015TC
2”
15”
40-1/4”
4
11
58.20
8515TC
2”
15”
85-1/4”
4
21
97.90
4016TC
2”
16”
40-1/4”
4
12
59.60
8516TC
2”
16”
85-1/4”
4
23
102.80
4018TC
2”
18”
40-1/4”
4
12
60.40
8518TC
2”
18”
85-1/4”
4
24
103.40
4020TC
2”
20”
40-1/4”
4
13
62.60
8520TC
2”
20”
85-1/4”
4
25
108.90
4024TC
2”
24”
40-1/4”
3
14
67.00
8524TC
2”
24”
85-1/4”
3
29
120.00
4026TC
2”
26”
40-1/4”
3
15
70.60
8526TC
2”
26”
85-1/4”
3
30
126.60
4030TC
2”
30”
40-1/4”
3
16
77.40
8530TC
2”
30”
85-1/4”
3
32
138.40
4032TC
2”
32”
40-1/4”
3
17
83.00
8532TC
2”
32”
85-1/4”
3
36
153.00
4036TC
2”
36”
40-1/4”
3
18
83.70
8536TC
2”
36”
85-1/4”
3
37
153.70
6409TC
2”
9”
64-1/4”
6
15
68.80
8809TC
2”
9”
88-1/4”
6
19
86.10
6412TC
2”
12”
64-1/4”
4
16
74.20
8812TC
2”
12”
88-1/4”
4
20
92.40
6413TC
2”
13”
64-1/4”
4
17
76.40
8813TC
2”
13”
88-1/4”
4
21
94.60
6415TC
2”
15”
64-1/4”
4
17
80.90
8815TC
2”
15”
88-1/4”
4
22
98.60
6416TC
2”
16”
64-1/4”
4
18
85.30
8816TC
2”
16”
88-1/4”
4
24
103.00
6418TC
2”
18”
64-1/4”
4
19
86.10
8818TC
2”
18”
88-1/4”
4
25
103.80
6420TC
2”
20”
64-1/4”
4
20
89.50
8820TC
2”
20”
88-1/4”
4
26
110.50
6424TC
2”
24”
64-1/4”
3
22
96.90
8824TC
2”
24”
88-1/4”
3
29
123.90
6426TC
2”
26”
64-1/4”
3
23
101.30
8826TC
2”
26”
88-1/4”
3
30
129.50
6430TC
2”
30”
64-1/4”
3
25
110.10
8830TC
2”
30”
88-1/4”
3
30
142.90
6432TC
2”
32”
64-1/4”
3
27
121.90
8832TC
2”
32”
88-1/4”
3
37
156.00
6436TC
2”
36”
64-1/4”
3
28
122.60
8836TC
2”
36”
88-1/4”
3
38
156.60
7609TC
2”
9”
76-1/4”
6
17
77.40
9709TC
2”
9”
97-1/4”
6
22
111.30
7612TC
2”
12”
76-1/4”
4
18
80.50
9712TC
2”
12”
97-1/4”
4
23
116.80
7613TC
2”
13”
76-1/4”
4
19
82.70
9713TC
2”
13”
97-1/4”
4
24
120.50
7615TC
2”
15”
76-1/4”
4
19
87.30
9715TC
2”
15”
97-1/4”
4
24
127.40
7616TC
2”
16”
76-1/4”
4
21
94.20
9716TC
2”
16”
97-1/4”
4
27
135.70
7618TC
2”
18”
76-1/4”
4
22
94.80
9718TC
2”
18”
97-1/4”
4
28
136.60
7620TC
2”
20”
76-1/4”
4
23
97.00
9720TC
2”
20”
97-1/4”
3
29
142.90
7624TC
2”
24”
76-1/4”
3
26
102.60
9724TC
2”
24”
97-1/4”
3
32
155.70
7626TC
2”
26”
76-1/4”
3
27
109.20
9726TC
2”
26”
97-1/4”
3
33
162.00
7630TC
2”
30”
76-1/4”
3
29
123.20
9730TC
2”
30”
97-1/4”
3
37
176.20
7632TC
2”
32”
76-1/4”
3
31
138.20
9732TC
2”
32”
97-1/4”
3
40
194.80
7636TC
2”
36”
76-1/4”
3
32
138.70
9736TC
2”
36”
97-1/4”
3
41
195.40
TOP
Custom sizes are available, consult factory for more information.
All uprights are double keyhole punched on 1-1/2" centers.
BOTTOM
TEL: 800-828-8018
www.datumfiling.com • sales@datumfiling.com
23
EFFECTIVE FEBRUARY 1, 2012
Prices and specifications subject to change without notice.
Component Parts - Open L Uprights
Item #
W
D
H
Pcs/
Ctn
Est
Lbs.
List
Price
Item #
W
D
H
Pcs/
Ctn
Est
Lbs.
List
Price
4009LO
1-1/8”
9”
40-1/4”
6
5
40.80
8509LO
1-1/8”
9”
85-1/4”
6
10
61.70
4012LO
1-1/8” 12”
40-1/4”
6
6
41.90
8512LO
1-1/8” 12”
85-1/4”
6
11
63.90
4013LO
1-1/8” 13”
40-1/4”
6
6
43.10
8513LO
1-1/8” 13”
85-1/4”
6
11
64.50
4015LO
1-1/8” 15”
40-1/4”
6
6
44.10
8515LO
1-1/8” 15”
85-1/4”
6
11
65.10
4016LO
1-1/8” 16”
40-1/4”
6
7
45.30
8516LO
1-1/8” 16”
85-1/4”
6
12
67.30
4018LO
1-1/8” 18”
40-1/4”
4
7
46.30
8518LO
1-1/8” 18”
85-1/4”
4
12
68.40
4020LO
1-1/8” 20”
40-1/4”
4
7
48.00
8520LO
1-1/8” 20”
85-1/4”
4
12
70.50
4024LO
1-1/8” 24”
40-1/4”
4
8
49.70
8524LO
1-1/8” 24”
85-1/4”
4
13
72.80
4026LO
1-1/8” 26”
40-1/4”
4
8
51.30
8526LO
1-1/8” 26”
85-1/4”
4
13
75.60
4030LO
1-1/8” 30”
40-1/4”
4
8
52.90
8530LO
1-1/8” 30”
85-1/4”
4
14
79.40
4032LO
1-1/8” 32”
40-1/4”
4
9
56.30
8532LO
1-1/8” 32”
85-1/4”
4
15
84.90
4036LO
1-1/8” 36”
40-1/4”
4
9
57.30
8536LO
1-1/8” 36”
85-1/4”
4
15
86.00
6409LO
1-1/8”
9”
64-1/4”
6
8
51.90
8809LO
1-1/8”
9”
88-1/4”
6
10
61.70
6412LO
1-1/8” 12”
64-1/4”
6
9
55.10
8812LO
1-1/8” 12”
88-1/4”
6
11
65.10
6413LO
1-1/8”
13’
64-1/4”
6
8
55.70
8813LO
1-1/8” 13”
88-1/4”
6
11
66.20
6415LO
1-1/8” 15”
64-1/4”
6
10
56.30
8815LO
1-1/8” 15”
88-1/4”
6
11
67.30
6416LO
1-1/8” 16”
64-1/4”
6
10
58.00
8816LO
1-1/8” 16”
88-1/4”
6
12
68.40
6418LO
1-1/8” 18”
64-1/4”
4
10
58.50
8818LO
1-1/8” 18”
88-1/4”
4
13
69.50
6420LO
1-1/8” 20”
64-1/4”
4
10
59.90
8820LO
1-1/8” 20”
88-1/4”
4
13
73.00
6424LO
1-1/8” 24”
64-1/4”
4
11
61.70
8824LO
1-1/8” 24”
88-1/4”
4
14
75.00
6426LO
1-1/8” 26”
64-1/4”
4
11
63.50
8826LO
1-1/8” 26”
88-1/4”
4
14
77.70
6430LO
1-1/8” 30”
64-1/4”
4
12
65.10
8830LO
1-1/8” 30”
88-1/4”
4
15
83.80
6432LO
1-1/8” 32”
64-1/4”
4
13
68.40
8832LO
1-1/8” 32”
88-1/4”
4
16
86.00
6436LO
1-1/8” 36”
64-1/4”
4
13
69.50
8836LO
1-1/8” 36”
88-1/4”
4
16
86.00
7609LO
1-1/8”
9”
76-1/4”
6
9
58.00
9709LO
1-1/8”
9”
97-1/4”
6
12
80.60
7612LO
1-1/8” 12”
76-1/4”
6
10
58.50
9712LO
1-1/8” 12”
97-1/4”
6
13
83.20
7613LO
1-1/8” 13”
76-1/4”
6
10
58.90
9713LO
1-1/8” 13”
97-1/4”
6
13
85.10
7615LO
1-1/8” 15”
76-1/4”
6
10
60.70
9715LO
1-1/8” 15”
97-1/4”
6
14
86.90
7616LO
1-1/8” 16”
76-1/4”
6
11
62.50
9716LO
1-1/8” 16”
97-1/4”
6
15
89.10
7618LO
1-1/8” 18”
76-1/4”
4
11
62.90
9718LO
1-1/8” 18”
97-1/4”
4
15
89.50
7620LO
1-1/8” 20”
76-1/4”
4
11
65.10
9720LO
1-1/8” 20”
97-1/4”
4
15
92.40
7624LO
1-1/8” 24”
76-1/4”
4
12
67.30
9724LO
1-1/8” 24”
97-1/4”
4
17
97.00
7626LO
1-1/8” 26”
76-1/4”
4
12
70.70
9726LO
1-1/8” 26”
97-1/4”
4
17
100.80
7630LO
1-1/8” 30”
76-1/4”
4
13
77.20
9730LO
1-1/8” 30”
97-1/4”
4
17
105.80
7632LO
1-1/8” 32”
76-1/4”
4
14
79.40
9732LO
1-1/8” 32”
97-1/4”
4
18
108.60
7636LO
1-1/8” 36”
76-1/4”
4
14
80.50
9736LO
1-1/8” 36”
97-1/4”
4
18
109.60
TOP
BOTTOM
TEL: 800-828-8018
www.datumfiling.com • sales@datumfiling.com
Open “L” uprights are not recommended
for X-Ray applications.
Custom sizes are available, consult factory
for more information.
All uprights are double keyhole punched
on 1-1/2" centers.
24
EFFECTIVE FEBRUARY 1, 2012
Prices and specifications subject to change without notice.
Component Parts - Open T Uprights
Item #
W
4009TO
4012TO
Pcs/ Est
Ctn Lbs.
List
Price
Item #
W
7
48.50
8509TO
8
50.70
8512TO
51.70
8513TO
2”
13”
52.90
8515TO
2”
15”
D
H
2”
9”
40-1/4”
6
2”
12”
40-1/4”
4
4013TO
2”
13”
40-1/4”
4
8
4015TO
2”
15”
40-1/4”
4
9
Pcs/ Est
Ctn Lbs.
List
Price
D
H
2”
9”
85-1/4”
6
14
79.40
2”
12”
85-1/4”
4
15
83.80
85-1/4”
4
15
84.50
85-1/4”
4
16
86.00
4016TO
2”
16”
40-1/4”
4
9
54.10
8516TO
2”
16”
85-1/4”
4
17
88.20
4018TO
2”
18”
40-1/4”
4
9
55.10
8518TO
2”
18”
85-1/4”
4
17
89.40
4020TO
2”
20”
40-1/4”
4
9
58.80
8520TO
2”
20”
85-1/4”
4
17
90.50
4024TO
2”
24”
40-1/4”
3
10
59.50
8524TO
2”
24”
85-1/4”
3
19
93.80
4026TO
2”
26”
40-1/4”
3
10
60.20
8526TO
2”
26”
85-1/4”
3
19
96.60
4030TO
2”
30”
40-1/4”
3
11
62.90
8530TO
2”
30”
85-1/4”
3
20
99.20
4032TO
2”
32”
40-1/4”
3
11
67.30
8532TO
2”
32”
85-1/4”
3
21
101.40
4036TO
2”
36”
40-1/4”
3
11
68.40
8536TO
2”
36”
85-1/4”
3
22
102.60
6409TO
2”
9”
64-1/4”
6
11
66.20
8809TO
2”
9”
88-1/4”
6
14
80.50
6412TO
2”
12”
64-1/4”
4
12
68.40
8812TO
2”
12”
88-1/4”
4
15
83.80
6413TO
2”
13”
64-1/4”
4
12
69.30
8813TO
2”
13”
88-1/4”
4
15
84.70
6415TO
2”
15”
64-1/4”
4
13
70.60
8815TO
2”
15”
88-1/4”
4
16
86.00
6416TO
2”
16”
64-1/4”
4
13
71.70
8816TO
2”
16”
88-1/4”
4
17
89.40
6418TO
2”
18”
64-1/4”
4
14
72.80
8818TO
2”
18”
88-1/4”
4
18
90.40
6420TO
2”
20”
64-1/4”
4
14
74.60
8820TO
2”
20”
88-1/4”
4
18
93.30
6424TO
2”
24”
64-1/4”
3
15
76.10
8824TO
2”
24”
88-1/4”
3
19
96.00
6426TO
2”
26”
64-1/4”
3
15
77.60
8826TO
2”
26”
88-1/4”
3
19
100.90
6430TO
2”
30”
64-1/4”
3
15
79.40
8830TO
2”
30”
88-1/4”
3
19
103.60
6432TO
2”
32”
64-1/4”
3
16
84.90
8832TO
2”
32”
88-1/4”
3
22
111.40
6436TO
2”
36”
64-1/4”
3
16
86.00
8836TO
2”
36”
88-1/4”
3
23
112.50
7609TO
2”
9”
76-1/4”
6
13
73.90
9709TO
2”
9”
97-1/4”
6
17
102.10
7612TO
2”
12”
76-1/4”
4
14
75.00
9712TO
2”
12”
97-1/4”
4
18
105.80
7613TO
2”
13”
76-1/4”
4
14
76.10
9713TO
2”
13”
97-1/4”
4
18
107.10
7615TO
2”
15”
76-1/4”
4
15
78.30
9715TO
2”
15”
97-1/4”
4
19
109.60
7616TO
2”
16”
76-1/4”
4
16
80.50
9716TO
2”
16”
97-1/4”
4
20
110.90
7618TO
2”
18”
76-1/4”
4
16
81.60
9718TO
2”
18”
97-1/4”
4
20
112.10
7620TO
2”
20”
76-1/4”
4
16
84.00
9720TO
2”
20”
97-1/4”
4
20
115.30
7624TO
2”
24”
76-1/4”
3
18
89.40
9724TO
2”
24”
97-1/4”
3
21
118.40
7626TO
2”
26”
76-1/4”
3
18
92.40
9726TO
2”
26”
97-1/4”
3
21
120.30
7630TO
2”
30”
76-1/4”
3
18
96.00
9730TO
2”
30”
97-1/4”
3
22
123.50
7632TO
2”
32”
76-1/4”
3
19
97.00
9732TO
2”
32”
97-1/4”
3
23
127.30
7636TO
2”
36”
76-1/4”
3
19
98.20
9736TO
2”
36”
97-1/4”
3
23
128.50
TOP
Open “T” uprights are not recommended for
X-Ray applications.
Custom sizes are available, consult factory for more
information.
All uprights are double keyhole punched on 1-1/2" centers.
BOTTOM
TEL: 800-828-8018
www.datumfiling.com • sales@datumfiling.com
25
EFFECTIVE FEBRUARY 1, 2012
Prices and specifications subject to change without notice.
Component Parts - Upright Extensions
4Post™ Upright Extension Kits extend the current height of the 4Post™ unit to increase usable vertical storage
space. Extension kits can be added to 4Post™ stationary units and/or units on MobileTrak5® Systems.
Extension Kits CANNOT be used with TrakSlider™ Systems.
“L” Upright Extension Conversion Chart
Proposed Upright Height
Current Upright Height
40-1/4” 64-1/4” 76-1/4” 85-1/4” 88-1/4” 97-1/4” 121-1/4”
40-1/4”
n/a
64-1/4”
n/a
n/a
n/a
76-1/4”
n/a
n/a
n/a
n/a
n/a
85-1/4”
n/a
n/a
n/a
n/a
n/a
n/a
36XX-ALC
88-1/4”
n/a
n/a
n/a
n/a
n/a
n/a
33XX-ALC
97-1/4”
n/a
n/a
n/a
n/a
n/a
n/a
24XX-ALC
24XX-ALC 36XX-ALC 45XX-ALC 48XX-ALC 57XX-ALC
n/a
21XX-ALC 24XX-ALC 33XX-ALC 57XX-ALC
21XX-ALC 45XX-ALC
For applications requiring upright heights greater that 121-1/2”, consult the factory.
All 4Post™ starter units require 2 “L” Upright Extension Kits.
Replace “XX” in each part number with the depth of the upright.
“T” Upright Extension Conversion Chart
Proposed Upright Height
Current Upright Height
40-1/4” 64-1/4” 76-1/4” 85-1/4” 88-1/4” 97-1/4” 121-1/4”
40-1/4”
n/a
64-1/4”
n/a
n/a
n/a
76-1/4”
n/a
n/a
n/a
n/a
n/a
85-1/4”
n/a
n/a
n/a
n/a
n/a
n/a
36XX-ATC
88-1/4”
n/a
n/a
n/a
n/a
n/a
n/a
33XX-ATC
97-1/4”
n/a
n/a
n/a
n/a
n/a
n/a
24XX-ATC
24XX-ATC 36XX-ATC 45XX-ATC 48XX-ATC 57XX-ATC
n/a
21XX-ATC 24XX-ATC 33XX-ATC 57XX-ATC
21XX-ATC 45XX-ATC
For applications requiring upright heights greater that 121-1/2”, consult the factory.
All 4Post™ adder units require 1 “T” Upright Extension Kit.
Replace “XX” in each part number with the depth of the upright.
TEL: 800-828-8018
www.datumfiling.com • sales@datumfiling.com
26
EFFECTIVE FEBRUARY 1, 2012
Prices and specifications subject to change without notice.
Upright Extension Kits
Allows for custom uprights up to 121-1/4" high. Simple assembly, includes all necessary mounting hardware.
Upright Extension Kits are only available as closed uprights. Upright Extension Kits can be used with open or
closed “L” and “T” uprights. Additional shelves and supports are sold separately.
Note: All 4Post™ starter units require 2 “L” Upright Extension Kits.
All 4Post™ adder units require 1 “T” Upright Extension Kit.
Not compatible with Library Closed "L" or "T" Uprights.
Closed “L”
Item#
D
H
Est Lbs.
List Price
Item#
D
H
Est Lbs.
List Price
2109-ALC
9”
21”
4
47.10
3609-ALC
9”
36”
7
66.70
2112-ALC
12”
21”
5
50.50
3612-ALC
12”
36”
8
72.20
2113-ALC
13”
21”
6
51.60
3613-ALC
13”
36”
9
74.00
2115-ALC
15”
21”
6
53.60
3615-ALC
15”
36”
9
77.60
2116-ALC
16”
21”
7
55.10
3616-ALC
16”
36”
10
80.50
2118-ALC
18”
21”
7
56.80
3618-ALC
18”
36”
11
83.00
2120-ALC
20”
21”
8
58.90
3620-ALC
20”
36”
12
86.50
2124-ALC
24”
21”
8
63.10
3624-ALC
24”
36”
13
93.80
2126-ALC
26”
21”
9
65.30
3626-ALC
26”
36”
15
97.30
2130-ALC
30”
21”
9
69.30
3630-ALC
30”
36”
16
104.50
2132-ALC
32”
21”
10
72.60
3632-ALC
32”
36”
17
110.00
2136-ALC
36”
21”
11
75.60
3636-ALC
36”
36”
18
115.40
2409-ALC
9”
24”
5
51.10
4509-ALC
9”
45”
9
78.50
2412-ALC
12”
24”
5
54.70
4512-ALC
12”
45”
10
85.30
2413-ALC
13”
24”
6
55.90
4513-ALC
13”
45”
11
87.50
2415-ALC
15”
24”
6
58.50
4515-ALC
15”
45”
11
92.10
2416-ALC
16”
24”
6
60.30
4516-ALC
16”
45”
12
95.30
2418-ALC
18”
24”
7
62.10
4518-ALC
18”
45”
13
98.70
2420-ALC
20”
24”
9
64.50
4520-ALC
20”
45”
15
103.20
2424-ALC
24”
24”
9
69.20
4524-ALC
24”
45”
16
112.20
2426-ALC
26”
24”
10
71.70
4526-ALC
26”
45”
18
116.80
2430-ALC
30”
24”
10
76.40
4530-ALC
30”
45”
19
125.70
2432-ALC
32”
24”
11
79.80
4532-ALC
32”
45”
21
132.40
2436-ALC
36”
24”
12
83.70
4536-ALC
36”
45”
23
139.20
3309-ALC
9”
33”
6
62.90
5709-ALC
9”
57”
11
94.20
3312-ALC
12”
33”
7
67.80
5712-ALC
12”
57”
13
102.70
3313-ALC
13”
33”
8
68.60
5713-ALC
13”
57”
14
104.80
3315-ALC
15”
33”
8
70.40
5715-ALC
15”
57”
14
108.80
3316-ALC
16”
33”
8
71.50
5716-ALC
16”
57”
15
114.30
3318-ALC
18”
33”
9
72.80
5718-ALC
18”
57”
17
119.70
3320-ALC
20”
33”
11
77.70
5720-ALC
20”
57”
19
125.50
3324-ALC
24”
33”
12
87.70
5724-ALC
24”
57”
21
136.80
3326-ALC
26”
33”
13
90.90
5726-ALC
26”
57”
22
142.60
3330-ALC
30”
33”
14
97.40
5730-ALC
30”
57”
25
153.90
3332-ALC
32”
33”
16
102.60
5732-ALC
32”
57”
27
162.40
3336-ALC
36”
33”
17
107.50
5736-ALC
36”
57”
29
171.00
TEL: 800-828-8018
www.datumfiling.com • sales@datumfiling.com
27
EFFECTIVE FEBRUARY 1, 2012
Prices and specifications subject to change without notice.
Upright Extension Kits
Allows for custom uprights up to 121-1/4" high. Simple assembly, includes all necessary mounting hardware.
Upright Extension Kits are only available as closed uprights. Upright Extension Kits can be used with open or
closed “L” and “T” uprights. Additional shelves and supports are sold separately.
Note: All 4Post™ starter units require 2 “L” Upright Extension Kits.
All 4Post™ adder units require 1 “T” Upright Extension Kit.
Not compatible with Library Closed "L" or "T" Uprights.
Closed “T”
Item#
D
H
Est Lbs.
List Price
Item#
D
H
Est Lbs.
List Price
2109-ATC
9”
21”
5
65.20
2112-ATC
12”
21”
6
68.10
3609-ATC
9”
3612-ATC
12”
36”
8
86.90
36”
10
92.40
2113-ATC
13”
21”
6
2115-ATC
15”
21”
6
69.20
3613-ATC
71.30
3615-ATC
13”
36”
11
94.20
15”
36”
11
97.80
2116-ATC
16”
21”
2118-ATC
18”
21”
7
72.90
3616-ATC
7
74.40
3618-ATC
16”
36”
11
100.60
18”
36”
12
103.20
2120-ATC
20”
21”
8
76.70
3620-ATC
20”
36”
14
106.80
2124-ATC
24”
2126-ATC
26”
21”
9
21”
10
81.00
3624-ATC
24”
36”
15
114.10
83.10
3626-ATC
26”
36”
16
117.70
2130-ATC
2132-ATC
30”
21”
32”
21”
10
87.20
3630-ATC
30”
36”
17
125.00
11
90.20
3632-ATC
32”
36”
19
130.40
2136-ATC
36”
2409-ATC
9”
21”
11
93.30
3636-ATC
36”
36”
20
135.80
24”
6
69.50
4509-ATC
9”
45”
11
100.20
2412-ATC
2413-ATC
12”
24”
6
73.10
4512-ATC
12”
45”
12
106.80
13”
24”
7
74.30
4513-ATC
13”
45”
13
109.00
2415-ATC
15”
24”
7
76.80
4515-ATC
15”
45”
13
113.70
2416-ATC
16”
24”
8
78.50
4516-ATC
16”
45”
14
117.00
2418-ATC
18”
24”
8
80.20
4518-ATC
18”
45”
15
120.40
2420-ATC
20”
24”
9
82.40
4520-ATC
20”
45”
17
125.00
2424-ATC
24”
24”
10
87.60
4524-ATC
24”
45”
18
133.90
2426-ATC
26”
24”
11
89.80
4526-ATC
26”
45”
19
138.30
2430-ATC
30”
24”
11
94.70
4530-ATC
30”
45”
21
147.50
2432-ATC
32”
24”
12
98.40
4532-ATC
32”
45”
23
154.10
2436-ATC
36”
24”
13
101.90
4536-ATC
36”
45”
24
161.00
3309-ATC
9”
33”
8
82.50
5709-ATC
9”
57”
13
117.60
3312-ATC
12”
33”
9
87.60
5712-ATC
12”
57”
15
126.20
3313-ATC
13”
33”
10
88.40
5713-ATC
13”
57”
16
129.40
3315-ATC
15”
33”
10
90.00
5715-ATC
15”
57”
16
134.80
3316-ATC
16”
33”
10
92.40
5716-ATC
16”
57”
17
138.60
3318-ATC
18”
33”
10
92.40
5718-ATC
18”
57”
19
143.40
3320-ATC
20”
33”
12
98.20
5720-ATC
20”
57”
21
149.30
3324-ATC
24”
33”
13
107.50
5724-ATC
24”
57”
23
160.40
3326-ATC
26”
33”
15
110.80
5726-ATC
26”
57”
25
166.20
3330-ATC
30”
33”
16
117.30
5730-ATC
30”
57”
27
177.60
3332-ATC
32”
33”
17
122.10
5732-ATC
32”
57”
29
186.20
3336-ATC
36”
33”
18
127.20
5736-ATC
36”
57”
31
194.80
TEL: 800-828-8018
www.datumfiling.com • sales@datumfiling.com
28
EFFECTIVE FEBRUARY 1, 2012
Prices and specifications subject to change without notice.
Component Parts - Standard Duty Shelves 22 Gauge
Slotted Standard Duty Shelf
Item #
0924SS*
1224SS
1324SS
1524SS
1824SS*
2024SS
2424SS
2624SS
3024SS
3624SS
0930SS*
1230SS
1330SS
1530SS
1830SS
2030SS
2430SS
2630SS
3030SS
3630SS
0936SS*
1236SS
1336SS
1536SS
1836SS*
2036SS
2436SS
2636SS
3036SS
3636SS
0942SS*
1242SS
1342SS
1542SS
1842SS*
2042SS
2442SS
2642SS
3042SS
3642SS
0948SS*
1248SS
1348SS
1548SS
1848SS*
2048SS
2448SS
2648SS
3048SS
3648SS
# of
Entries
Single
Single
Single
Single
Double
Double
Double
Double
Double
Double
Single
Single
Single
Single
Double
Double
Double
Double
Double
Double
Single
Single
Single
Single
Double
Double
Double
Double
Double
Double
Single
Single
Single
Single
Double
Double
Double
Double
Double
Double
Single
Single
Single
Single
Double
Double
Double
Double
Double
Double
W
D
H
24”
24”
24”
24”
24”
24”
24”
24”
24”
24”
30”
30”
30”
30”
30”
30”
30”
30”
30”
30”
36”
36”
36”
36”
36”
36”
36”
36”
36”
36”
42”
42”
42”
42”
42”
42”
42”
42”
42”
42”
48”
48”
48”
48”
48”
48”
48”
48”
48”
48”
9”
12”
13’
15”
18”
20”
24”
26”
30”
36”
9”
12”
13”
15”
18”
20”
24”
26”
30”
36”
9”
12”
13”
15”
18”
20”
24”
26”
30”
36”
9”
12”
13”
15”
18”
20”
24”
26”
30”
36”
9”
12”
13”
15”
18”
20”
24”
26”
30”
36”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
Pcs/ Est
Ctn Lbs.
16
2
16
2
16
2
16
4
8
5
8
5
8
6
8
7
8
8
8
10
16
3
16
4
16
4
16
5
8
6
8
6
8
7
8
8
8
10
8
11
16
4
16
5
16
5
16
6
8
7
8
7
8
8
8
9
8
11
8
14
16
5
16
5
16
6
16
6
8
8
8
9
8
10
8
10
8
14
8
18
16
6
16
6
16
7
16
7
8
9
8
10
8
11
8
12
8
15
8
19
List
Price
14.80
19.40
21.60
25.00
28.20
30.50
33.80
36.00
45.60
73.60
14.90
19.50
21.70
25.50
28.40
30.60
34.00
36.20
45.80
75.20
15.00
19.60
21.80
25.70
28.60
30.80
34.70
36.90
46.30
75.60
18.40
23.00
25.20
29.00
32.90
35.10
41.20
43.40
51.60
86.80
20.50
25.60
27.80
32.80
36.50
38.70
46.80
49.00
58.20
100.60
Unslotted Standard Duty Shelf
Item #
W
D
H
0924TS
1224TS
1324TS
1524TS
1824TS
2024TS
2424TS
2624TS
3024TS
3624TS
0930TS
1230TS
1330TS
1530TS
1830TS
2030TS
2430TS
2630TS
3030TS
3630TS
0936TS
1236TS
1336TS
1536TS
1836TS
2036TS
2436TS
2636TS
3036TS
3636TS
0942TS
1242TS
1342TS
1542TS
1842TS
2042TS
2442TS
2642TS
3042TS
3642TS
0948TS
1248TS
1348TS
1548TS
1848TS
2048TS
2448TS
2648TS
3048TS
3648TS
24”
24”
24”
24”
24”
24”
24”
24”
24”
24”
30”
30”
30”
30”
30”
30”
30”
30”
30”
30”
36”
36”
36”
36”
36”
36”
36”
36”
36”
36”
42”
42”
42”
42”
42”
42”
42”
42”
42”
42”
48”
48”
48”
48”
48”
48”
48”
48”
48”
48”
9”
12”
13”
15”
18”
20”
24”
26”
30”
36”
9”
12”
13”
15”
18”
20”
24”
26”
30”
36”
9”
12”
13”
15”
18”
20”
24”
26”
30”
36”
9”
12”
13”
15”
18”
20”
24”
26”
30”
36”
9”
12”
13”
15”
18”
20”
24”
26”
30”
36”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
Pcs/ Est
Ctn Lbs.
16
2
16
2
16
2
8
4
8
5
8
5
8
6
8
7
8
8
8
10
16
3
16
4
16
4
8
5
8
6
8
6
8
7
8
8
8
10
8
11
16
4
16
5
16
5
8
6
8
7
8
7
8
8
8
9
8
11
8
14
16
5
16
5
16
6
8
6
8
8
8
9
8
10
8
10
8
14
8
18
16
6
16
6
16
7
8
7
8
9
8
10
8
11
8
12
8
15
8
19
List
Price
14.80
19.40
21.60
25.00
28.20
30.50
33.80
36.00
45.60
73.60
14.90
19.50
21.70
25.50
28.40
30.60
34.00
36.20
45.80
75.20
15.00
19.60
21.80
25.70
28.60
30.80
34.70
36.90
46.30
75.60
18.40
23.00
25.20
29.00
32.90
35.10
41.20
43.40
51.60
86.80
20.50
25.60
27.80
32.80
36.50
38.70
46.80
49.00
58.20
100.60
*Specify FDB Dividers for 9" & 18" shelves, all other require FDL Dividers.
*For use with standard L&T Uprights found on pages 22-25 only.
For perforated shelving:
Change the SS suffix to VS and add 20% to the list price, rounded to the dime.
TEL: 800-828-8018
www.datumfiling.com • sales@datumfiling.com
29
EFFECTIVE FEBRUARY 1, 2012
Prices and specifications subject to change without notice.
Component Parts - Standard Duty Shelves 22 Gauge
Slotted Standard Archive Shelf
# of
Entries
W
D
H
1624SS
Single
24”
16”
3/4”
16
4
27.60
3224SS
Double
24”
32”
3/4”
8
9
46.30
1630SS
Single
30”
16”
3/4”
16
6
27.70
3230SS
Double
30”
32”
3/4”
8
11
46.50
1636SS
Single
36”
16”
3/4”
16
7
27.80
3236SS
Double
36”
32”
3/4”
8
12
46.90
1642SS
Single
42”
16”
3/4”
16
7
29.90
3242SS
Double
42”
32”
3/4”
8
15
52.20
1648SS
Single
48”
16”
3/4”
16
8
35.90
3248SS
Double
48”
32”
3/4”
8
16
59.00
Item #
Pcs/ Est
Ctn Lbs.
List
Price
Single/double entry.
3/4" high.
22 gauge.
All shelves require two SS-XXXX shelf supports.
SR-XX shelf reinforcement for additional weight capacity.
Requires FDL Dividers.
For use with standard L & T Uprights found on pages 22-25.
Unslotted Standard Archive Shelf
Item #
W
D
H
1624TS
24”
16”
3/4”
Pcs/ Est
Ctn Lbs.
16
List
Price
4
27.60
3224TS
24”
32”
3/4”
8
9
46.30
1630TS
30”
16”
3/4”
16
6
27.70
3230TS
30”
32”
3/4”
8
11
46.50
1636TS
36”
16”
3/4”
16
7
27.80
3236TS
36”
32”
3/4”
8
12
46.90
1642TS
42”
16”
3/4”
16
7
29.90
3242TS
42”
32”
3/4”
8
15
52.20
1648TS
48”
16”
3/4”
16
8
35.90
3248TS
48”
32”
3/4”
8
16
59.00
TEL: 800-828-8018
www.datumfiling.com • sales@datumfiling.com
3/4" high.
22 gauge.
All shelves require two SS-XXXX shelf supports.
SR-XX shelf reinforcement for additional weight capacity.
Double entry shelves include holes to accept
Unslotted Center Divider (CDXX) if needed.
30
EFFECTIVE FEBRUARY 1, 2012
Prices and specifications subject to change without notice.
Component Parts - Heavy Duty Shelves 18 Gauge
Unslotted Heavy Duty Shelf
Slotted Heavy Duty Shelf
Item #
0924SM*
1224SM
1324SM
1524SM
1824SM*
2024SM
2424SM
2624SM
3024SM
3624SM
0930SM*
1230SM
1330SM
1530SM
1830SM*
2030SM
2430SM
2630SM
3030SM
3630SM
0936SM*
1236SM
1336SM
1536SM
1836SM*
2036SM
2436SM
2636SM
3036SM
3636SM
0942SM*
1242SM
1342SM
1542SM
1842SM*
2042SM
2442SM
2642SM
3042SM
3642SM
0948SM*
1248SM
1348SM
1548SM
1848SM*
2048SM
2448SM
2648SM
3048SM
3648SM
# of
Entries
Single
Single
Single
Single
Double
Double
Double
Double
Double
Double
Single
Single
Single
Single
Double
Double
Double
Double
Double
Double
Single
Single
Single
Single
Double
Double
Double
Double
Double
Double
Single
Single
Single
Single
Double
Double
Double
Double
Double
Double
Single
Single
Single
Single
Double
Double
Double
Double
Double
Double
W
D
H
24”
24”
24”
24”
24”
24”
24”
24”
24”
24”
30”
30”
30”
30”
30”
30”
30”
30”
30”
30”
36”
36”
36”
36”
36”
36”
36”
36”
36”
36”
42”
42”
42”
42”
42”
42”
42”
42”
42”
42”
48”
48”
48”
48”
48”
48”
48”
48”
48”
48”
9”
12”
13”
15”
18”
20”
24”
26”
30”
36”
9”
12”
13”
15”
18”
20”
24”
26”
30”
36”
9”
12”
13”
15”
18”
20”
24”
26”
30”
36”
9”
12”
13”
15”
18”
20”
24”
26”
30”
36”
9”
12”
13”
15”
18”
20”
24”
26”
30”
36”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
Pcs/ Est
Ctn Lbs.
16
4
16
4
16
4
16
5
8
7
8
7
8
9
8
9
8
10
8
11
16
5
16
5
16
6
16
7
8
9
8
10
8
11
8
12
8
13
8
15
16
5
16
6
16
6
16
9
8
11
8
12
8
13
8
14
8
15
8
18
16
6
16
7
16
7
16
10
8
13
8
14
8
15
8
16
8
18
8
21
16
7
16
8
16
8
16
12
8
15
8
16
8
17
8
18
8
21
8
25
List
Price
17.70
21.80
24.00
30.30
35.80
38.00
43.20
47.60
59.20
74.10
17.90
22.20
24.40
30.70
36.10
40.50
43.60
48.00
59.50
74.10
18.10
22.50
24.70
31.00
36.40
40.80
43.80
48.20
59.70
77.50
21.40
28.40
30.60
37.80
41.70
46.10
56.00
60.40
68.60
88.40
23.50
32.60
35.80
43.60
46.40
50.80
60.90
65.30
75.90
102.30
Item #
0924TM
1224TM
1324TM
1524TM
1824TM
2024TM
2424TM
2624TM
3024TM
3624TM
0930TM
1230TM
1330TM
1530TM
1830TM
2030TM
2430TM
2630TM
3030TM
3630TM
0936TM
1236TM
1336TM
1536TM
1836TM
2036TM
2436TM
2636TM
3036TM
3636TM
0942TM
1242TM
1342TM
1542TM
1842TM
2042TM
2442TM
2642TM
3042TM
3642TM
0948TM
1248TM
1348TM
1548TM
1848TM
1848TM
2448TM
2648TM
3048TM
3648TM
# of
Entries
Single
Single
Single
Single
Double
Double
Double
Double
Double
Double
Single
Single
Single
Single
Double
Double
Double
Double
Double
Double
Single
Single
Single
Single
Double
Double
Double
Double
Double
Double
Single
Single
Single
Single
Double
Double
Double
Double
Double
Double
Single
Single
Single
Single
Double
Double
Double
Double
Double
Double
W
D
H
24”
24”
24”
24”
24”
24”
24”
24”
24”
24”
30”
30”
30”
30”
30”
30”
30”
30”
30”
30”
36”
36”
36”
36”
36”
36”
36”
36”
36”
36”
42”
42”
42”
42”
42”
42”
42”
42”
42”
42”
48”
48”
48”
48”
48”
48”
48”
48”
48”
48”
9”
12”
13”
15”
18”
20”
24”
26”
30”
36”
9”
12”
13”
15”
18”
20”
24”
26”
30”
36”
9”
12”
13”
15”
18”
20”
24”
26”
30”
36”
9”
12”
13”
15”
18”
20”
24”
26”
30”
36”
9”
12”
13”
15”
18”
20”
24”
26”
30”
36”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
Pcs/ Est
Ctn Lbs.
16
4
16
4
16
4
8
5
8
7
8
7
8
9
8
9
8
10
8
11
16
5
16
5
16
6
8
7
8
9
8
10
8
11
8
12
8
13
8
15
16
5
16
6
16
6
8
9
8
11
8
12
8
13
8
14
8
15
8
18
16
6
16
7
16
7
8
10
8
13
8
14
8
15
8
16
8
18
8
21
16
7
16
8
16
8
8
12
8
15
8
16
8
17
8
18
8
21
8
25
List
Price
17.70
21.80
24.00
30.30
35.80
38.00
43.20
47.60
59.20
74.10
17.90
22.20
24.40
30.70
36.10
40.50
43.60
48.00
59.50
74.10
18.10
22.50
24.70
31.00
36.40
40.80
43.80
48.20
59.70
77.50
21.40
28.40
30.60
37.80
41.70
46.10
56.00
60.40
68.60
88.40
23.50
32.60
35.80
43.60
46.40
50.80
60.90
65.30
75.90
102.30
*Specify FDB Dividers for 9" and 18" shelves, all others require FDL Dividers.
*For use with standard L&T Uprights found on pages 22-25 only.
For perforated shelving:
Change the SM suffix to VM and add 20% to the list price, rounded to the dime.
TEL: 800-828-8018
www.datumfiling.com • sales@datumfiling.com
31
EFFECTIVE FEBRUARY 1, 2012
Prices and specifications subject to change without notice.
Component Parts - Heavy Duty Shelves 18 Gauge
Slotted Heavy Duty Archive Shelf
# of
Entries
W
D
H
1624SM
Single
24”
16”
3/4”
16
6
33.00
3224SM
Double
24”
32”
3/4”
8
11
59.90
1630SM
Single
30”
16”
3/4”
16
8
33.50
3230SM
Double
30”
32”
3/4”
8
14
60.20
1636SM
Single
36”
16”
3/4”
8
8
33.70
3236SM
Double
36”
32”
3/4”
8
16
60.50
1642SM
Single
42”
16”
3/4”
8
12
39.90
3242SM
Double
42”
32”
3/4”
8
19
69.20
1648SM
Single
48”
16”
3/4”
8
14
44.90
3248SM
Double
48”
32”
3/4”
8
22
76.80
Item #
Pcs/ Est
Ctn Lbs.
List
Price
Single/double entry. 3/4" high. 18 gauge.
All shelves require two MS-XXXX shelf supports.
SR-XX shelf reinforcement for additional weight capacity.
Requires FDL Dividers.
For use with standard L & T Uprights found on pages 22-25.
Unslotted Heavy Duty Archive Shelf
Pcs/ Est
Ctn Lbs.
List
Price
Item #
W
D
H
1624TM
24”
16”
3/4”
16
6
33.00
3224TM
24”
32”
3/4”
8
11
59.90
1630TM
30”
16”
3/4”
16
8
33.50
3230TM
30”
32”
3/4”
8
14
60.20
1636TM
36”
16”
3/4”
16
8
33.70
3236TM
36”
32”
3/4”
8
16
60.50
1642TM
42”
16”
3/4”
16
12
39.90
3242TM
42”
32”
3/4”
8
19
69.20
1648TM
48”
16”
3/4”
16
14
44.90
3248TM
48”
32”
3/4”
8
22
76.80
TEL: 800-828-8018
www.datumfiling.com • sales@datumfiling.com
3/4" high. 18 gauge. All shelves require two MS-XXXX shelf supports.
SR-XX shelf reinforcement for additional weight capacity.
Double entry shelves include holes to accept Unslotted Center Divider
(CDXX) if needed.
32
EFFECTIVE FEBRUARY 1, 2012
Prices and specifications subject to change without notice.
Component Parts - Heavy Duty Plus Slotted Shelves 18 Gauge
Slotted Heavy Duty Plus Shelf
Item #
# of
Entries
W
D
H
Pcs/ Est
Ctn Lbs.
List
Price
1224SH
Single
24”
12”
1-1/8”
12
5
1324SH
Single
24”
13”
1-1/8”
12
5
24.00
1524SH
Single
24”
15”
1-1/8”
6
7
33.20
1824SH
Single
24”
18”
1-1/8”
8
9
37.80
2024SH
Single
24”
20”
1-1/8”
6
8
40.00
2424SH
Double
24”
24”
1-1/8”
6
14
44.30
21.80
2624SH
Double
24”
26”
1-1/8”
4
15
46.50
3024SH
Double
24”
30”
1-1/8”
4
18
60.50
3624SH
Double
24”
36”
1-1/8”
4
20
72.30
1230SH
Single
30”
12”
1-1/8”
12
6
23.50
1330SH
Single
30”
13”
1-1/8”
12
6
25.70
1530SH
Single
30”
15”
1-1/8”
6
9
34.90
1830SH
Single
30”
18”
1-1/8”
8
10
39.80
2030SH
Single
30”
20”
1-1/8”
6
10
42.00
2430SH
Double
30”
24”
1-1/8”
6
15
47.60
2630SH
Double
30”
26”
1-1/8”
4
16
52.00
3030SH
Double
30”
30”
1-1/8”
4
19
63.70
3630SH
Double
30”
36”
1-1/8”
4
21
75.60
1236SH
Single
36”
12”
1-1/8”
12
7
25.00
1336SH
Single
36”
13”
1-1/8”
12
7
27.20
1536SH
Single
36”
15”
1-1/8”
6
9
36.40
1836SH
Single
36”
18”
1-1/8”
8
11
41.40
2036SH
Single
36”
20”
1-1/8”
6
11
44.60
2436SH
Double
36”
24”
1-1/8”
6
16
50.70
2636SH
Double
36”
26”
1-1/8”
4
17
55.10
3036SH
Double
36”
30”
1-1/8”
4
20
66.90
3636SH
Double
36”
36”
1-1/8”
4
22
79.10
1242SH
Single
42”
12”
1-1/8”
8
8
31.00
1342SH
Single
42”
13”
1-1/8”
8
8
34.30
1542SH
Single
42”
15”
1-1/8”
6
10
41.20
1842SH
Single
42”
18”
1-1/8”
8
12
47.70
2042SH
Single
42”
20”
1-1/8”
6
13
56.50
2442SH
Double
42”
24”
1-1/8”
6
17
76.90
2642SH
Double
42”
26”
1-1/8”
4
22
81.30
3042SH
Double
42”
30”
1-1/8”
4
21
90.40
3642SH
Double
42”
36”
1-1/8”
4
23
90.40
1248SH
Single
48”
12”
1-1/8”
8
8
34.40
1348SH
Single
48”
13”
1-1/8”
8
8
38.90
1548SH
Single
48”
15”
1-1/8”
6
12
48.20
1848SH
Single
48”
18”
1-1/8”
6
14
55.50
Single/double entry.
1-1/8" high.
18 gauge.
All shelves require two HS-XXXX shelf supports.
HRXX shelf reinforcement for additional weight capacity.
For perforated shelving:
Change the SH suffix to VH and add 15% to the list price,
rounded to the dime.
2048SH
Single
48”
20”
1-1/8”
6
15
61.10
2448SH
Double
48”
24”
1-1/8”
4
17
71.50
2648SH
Double
48”
26”
1-1/8”
4
18
77.10
3048SH
Double
48”
30”
1-1/8”
4
22
86.10
3648SH
Double
48”
36”
1-1/8”
4
26
104.00
TEL: 800-828-8018
www.datumfiling.com • sales@datumfiling.com
33
EFFECTIVE FEBRUARY 1, 2012
Prices and specifications subject to change without notice.
Component Parts - Heavy Duty Plus Unslotted Shelves 18 Gauge
Unslotted Heavy Duty Plus Shelf
# of
Entries
W
D
H
Pcs/ Est
Ctn Lbs.
Single
24”
12”
1-1/8”
12
5
List
Price
21.80
Single
24”
13”
1-1/8”
12
5
26.30
Single
24”
15”
1-1/8”
6
7
33.20
Single
24”
18”
1-1/8”
8
9
37.80
Single
24”
20”
1-1/8”
6
8
42.20
Double
24”
24”
1-1/8”
6
14
44.30
Double
24”
26”
1-1/8”
4
15
48.70
Double
24”
30”
1-1/8”
4
18
60.50
Double
24”
36”
1-1/8”
4
20
72.30
Single
30”
12”
1-1/8”
12
6
23.50
Single
30”
13”
1-1/8”
12
6
27.90
Single
30”
15”
1-1/8”
6
9
34.90
Single
30”
18”
1-1/8”
8
10
39.80
Single
30”
20”
1-1/8”
6
10
44.20
Double
30”
24”
1-1/8”
6
15
47.60
Double
30”
26”
1-1/8”
4
16
56.40
Double
30”
30”
1-1/8”
4
19
63.70
Double
30”
36”
1-1/8”
4
21
75.60
Single
36”
12”
1-1/8”
12
7
25.00
Single
36”
13”
1-1/8”
12
7
29.40
Single
36”
15”
1-1/8”
6
9
36.40
Single
36”
18”
1-1/8”
8
11
41.40
Single
36”
20”
1-1/8”
6
11
48.00
Double
36”
24”
1-1/8”
6
16
50.70
Double
36”
26”
1-1/8”
4
17
59.50
Double
36”
30”
1-1/8”
4
20
66.90
Double
36”
36”
1-1/8”
4
22
79.10
Single
42”
12”
1-1/8”
8
8
31.00
Single
42”
13”
1-1/8”
8
8
37.60
Single
42”
15”
1-1/8”
6
10
41.20
Single
42”
18”
1-1/8”
8
12
47.70
Single
42”
20”
1-1/8”
6
13
65.30
Double
42”
24”
1-1/8”
6
17
76.90
Double
42”
26”
1-1/8”
4
22
85.70
Double
42”
30”
1-1/8”
4
21
90.40
Double
42”
36”
1-1/8”
4
23
90.40
Single
48”
12”
1-1/8”
8
8
34.40
Single
48”
13”
1-1/8”
8
8
43.30
Single
48”
15”
1-1/8”
6
12
48.20
Single
48”
18”
1-1/8”
6
14
55.50
Single
48”
20”
1-1/8”
6
15
66.60
Double
48”
24”
1-1/8”
4
17
71.50
Double
48”
26”
1-1/8”
4
18
82.50
Double
48”
30”
1-1/8”
4
22
86.10
Double
48”
36”
1-1/8”
4
26
104.00
TEL: 800-828-8018
www.datumfiling.com • sales@datumfiling.com
1-1/8" high.
18 gauge.
All shelves require two HS-XXXX shelf supports.
HRXX shelf reinforcement for additional weight capacity.
Double entry shelves include holes to accept
Unslotted Center Divider (CDXX) if needed.
34
EFFECTIVE FEBRUARY 1, 2012
Prices and specifications subject to change without notice.
Library Shelving Component Parts - Standard Duty Shelves 22 Gauge
Slotted Library Standard Duty Shelving
Item # # of Entries
W
D
H
Pcs/Ctn Est Lbs. List Price
0924SL
Single
24”
9”
3/4”
16
2
14.80
1224SL
Single
24”
12”
3/4”
16
3
16.90
1324SL
Single
24”
13”
3/4”
16
3
18.00
1524SL
Single
24”
15”
3/4”
8
4
20.50
1824SL
Double
24”
18”
3/4”
8
5
25.40
2024SL
Double
24”
20”
3/4”
8
5
27.60
2424SL
Double
24”
24”
3/4”
8
6
31.70
2624SL
Double
24”
26”
3/4”
8
6
33.90
3024SL
Double
24”
30”
3/4”
8
8
35.90
0930SL
Single
30”
9”
3/4”
16
3
14.90
1230SL
Single
30”
12”
3/4”
16
4
17.00
1330SL
Single
30”
13”
3/4”
16
4
18.10
1530SL
Single
30”
15”
3/4”
8
5
20.80
1830SL
Double
30”
18”
3/4”
8
6
25.50
2030SL
Double
30”
20”
3/4”
8
7
27.70
2430SL
Double
30”
24”
3/4”
8
7
31.80
2630SL
Double
30”
26’
3/4”
8
8
34.00
3030SL
Double
30”
30”
3/4”
8
9
36.00
0936SL
Single
36”
9”
3/4”
16
4
15.00
1236SL
Single
36”
12”
3/4”
16
5
17.20
1336SL
Single
36”
13”
3/4”
16
5
18.30
1536SL
Single
36”
15”
3/4”
8
6
21.00
1836SL
Double
36”
18”
3/4”
8
7
25.60
2036SL
Double
36”
20”
3/4”
8
8
27.80
2436SL
Double
36”
24”
3/4”
8
8
32.10
2636SL
Double
36”
26”
3/4”
8
9
34.20
3036SL
Double
36”
30”
3/4”
8
10
36.10
0942SL
Single
42”
9”
3/4”
16
4
18.40
1242SL
Single
42”
12”
3/4”
16
5
21.10
1342SL
Single
42”
13”
3/4”
16
5
22.20
1542SL
Single
42”
15”
3/4”
8
7
24.20
1842SL
Double
42”
18”
3/4”
8
8
30.50
2042SL
Double
42”
20”
3/4”
8
9
32.70
2442SL
Double
42”
24”
3/4”
8
10
37.70
2642SL
Double
42”
26”
3/4”
8
11
39.90
3042SL
Double
42”
30”
3/4”
8
12
41.70
0948SL
Single
48”
9”
3/4”
16
4
20.50
1248SL
Single
48”
12”
3/4”
16
5
23.80
1348SL
Single
48”
13”
3/4”
16
5
24.90
1548SL
Single
48”
15”
3/4”
8
6
27.00
1848SL
Double
48”
18”
3/4”
8
9
32.30
2048SL
Double
48”
20”
3/4”
8
10
34.50
2448SL
Double
48”
24”
3/4”
8
11
42.20
2648SL
Double
48”
26”
3/4”
8
12
44.40
3048SL
Double
48”
30”
3/4”
8
13
47.00
TEL: 800-828-8018
www.datumfiling.com • sales@datumfiling.com
35
Single/double entry.
3/4" high.
22 gauge.
All shelves require two SS-XXXX shelf supports.
SR-XX shelf reinforcement for additional weight capacity.
Specify FDB Dividers for 9" Shelves, all other require
FDL Dividers.
EFFECTIVE FEBRUARY 1, 2012
Prices and specifications subject to change without notice.
Library Shelving Component Parts - Standard Duty Shelves 22 Gauge
Unslotted Library Standard Duty Shelving
Item # # of Entries
W
D
H
0924TL
24”
9”
3/4”
Single
Pcs/Ctn Est Lbs. List Price
16
1
14.80
1224TL
Single
24”
12”
3/4”
16
2
16.90
1324TL
Single
24”
13”
3/4”
16
2
18.00
1524TL
Single
24”
15”
3/4”
8
3
20.50
1824TL
Double
24”
18”
3/4”
8
4
25.40
2024TL
Double
24”
20”
3/4”
8
4
27.60
2424TL
Double
24”
24”
3/4”
8
5
31.70
2624TL
Double
24”
26”
3/4”
8
5
33.90
3024TL
Double
24”
30”
3/4”
8
9
35.90
0930TL
Single
30”
9”
3/4”
16
2
14.90
1230TL
Single
30”
12”
3/4”
16
3
17.00
1330TL
Single
30”
13’
3/4”
16
3
18.10
1530TL
Single
30”
15”
3/4”
8
4
20.80
1830TL
Double
30”
18”
3/4”
8
5
25.50
2030TL
Double
30”
20”
3/4”
8
6
27.70
2430TL
Double
30”
24”
3/4”
8
6
31.80
2630TL
Double
30”
26”
3/4”
8
7
34.00
3030TL
Double
30”
30”
3/4”
8
9
36.00
0936TL
Single
36”
9”
3/4”
16
3
14.80
1236TL
Single
36”
12”
3/4”
16
4
16.80
1336TL
Single
36”
13”
3/4”
16
4
18.30
1536TL
Single
36”
15”
3/4”
8
5
21.00
1836TL
Double
36”
18”
3/4”
8
6
24.90
2036TL
Double
36”
20”
3/4”
8
7
27.80
2436TL
Double
36”
24”
3/4”
8
7
32.00
2636TL
Double
36”
26”
3/4”
8
8
34.20
3036TL
Double
36”
30”
3/4”
8
10
36.10
0942TL
Single
42”
9”
3/4”
16
4
17.40
1242TL
Single
42”
12”
3/4”
16
5
20.10
1342TL
Single
42”
18”
3/4”
16
5
22.20
1542TL
Single
42”
15”
3/4”
8
6
24.20
1842TL
Double
42”
18”
3/4”
8
7
28.80
2042TL
Double
42”
20”
3/4”
8
8
32.70
2442TL
Double
42”
24”
3/4”
8
9
37.60
2642TL
Double
42”
26”
3/4”
8
10
39.90
3042TL
Double
42”
30”
3/4”
8
11
41.70
0948TL
Single
48”
9”
3/4”
16
5
19.40
1248TL
Single
48”
12”
3/4”
16
6
23.70
1348TL
Single
48”
13”
3/4”
16
6
24.90
1548TL
Single
48”
15”
3/4”
8
7
27.00
1848TL
Double
48”
18”
3/4”
8
9
32.30
2048TL
Double
48”
20”
3/4”
8
10
34.50
2448TL
Double
48”
24”
3/4”
8
11
42.10
2648TL
Double
48”
26”
3/4”
8
11
44.40
3048TL
Double
48”
30”
3/4”
8
14
46.90
TEL: 800-828-8018
www.datumfiling.com • sales@datumfiling.com
36
3/4" high.
22 gauge.
All shelves require two SS-XXXX shelf supports.
SR-XX shelf reinforcement for additional weight capacity.
Double entry shelves include holes to accept
Unslotted Center Divider (CDXX) if needed.
EFFECTIVE FEBRUARY 1, 2012
Prices and specifications subject to change without notice.
Component Parts - Standard Duty & Heavy Duty Plus Shelves
Punched Standard Shelf - 22 Gauge
Punched Heavy Duty Plus Shelf - 18 Gauge
Item #
List Price
Item #
19.40
21.60
25.00
28.20
30.50
33.80
36.00
45.60
73.60
19.50
21.70
25.50
28.20
30.60
34.00
36.20
45.80
75.20
19.60
21.80
25.70
28.60
30.80
34.70
36.90
46.30
75.60
23.00
25.20
29.00
32.90
35.10
41.20
43.40
51.60
86.80
25.60
27.80
32.80
36.50
38.70
46.80
49.00
58.20
100.60
1224PH
1324PH
1524PH
1824PH
2024PH
2424PH
2624PH
3024PH
3624PH
1230PH
1330PH
1530PH
1830PH
2030PH
2430PH
2630PH
3030PH
3630PH
1236PH
1336PH
1536PH
1836PH
2036PH
2436PH
2636PH
3036PH
3636PH
1242PH
1342PH
1542PH
1842PH
2042PH
2442PH
2642PH
3042PH
3642PH
1248PH
1348PH
1548PH
1848PH
2048PH
2448PH
2648PH
3048PH
3648PH
1224PS
1324PS
1524PS
1824PS
2024PS
2424PS
2624PS
3024PS
3624PS
1230PS
1330PS
1530PS
1830PS
2030PS
2430PS
2630PS
3030PS
3630PS
1236PS
1336PS
1536PS
1836PS
2036PS
2436PS
2636PS
3036PS
3636PS
1242PS
1342PS
1542PS
1842PS
2042PS
2442PS
2642PS
3042PS
3642PS
1248PS
1348PS
1548PS
1848PS
2048PS
2448PS
2648PS
3048PS
3648PS
# of
Entries
Single
Single
Single
Single
Double
Double
Double
Double
Double
Single
Single
Single
Single
Double
Double
Double
Double
Double
Single
Single
Single
Single
Double
Double
Double
Double
Double
Single
Single
Single
Single
Double
Double
Double
Double
Double
Single
Single
Single
Single
Double
Double
Double
Double
Double
W
D
H
24”
24”
24”
24”
24”
24”
24”
24”
24”
30”
30”
30”
30”
30”
30”
30”
30”
30”
36”
36”
36”
36”
36”
36”
36”
36”
36”
42”
42”
42”
42”
42”
42”
42”
42”
42”
48”
48”
48”
48”
48”
48”
48”
48”
48”
12”
13”
15”
18”
20”
24”
26”
30”
36”
12”
13”
15”
18”
20”
24”
26”
30”
36”
12”
13”
15”
18”
20”
24”
26”
30”
36”
12”
13”
15”
18”
20”
24”
26”
30”
36”
12”
13”
15”
18”
20”
24”
26”
30”
36”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
Est
Lbs.
1
2
4
5
5
6
7
8
10
2
4
5
6
6
7
8
10
11
3
5
6
7
7
8
9
11
14
4
6
6
8
9
10
10
14
18
5
7
7
8
10
11
12
15
19
# of
Entries
Single
Single
Single
Single
Single
Double
Double
Double
Double
Single
Single
Single
Single
Double
Double
Double
Double
Double
Single
Single
Single
Single
Single
Double
Double
Double
Double
Single
Single
Single
Single
Single
Double
Double
Double
Double
Single
Single
Single
Single
Single
Double
Double
Double
Double
W
D
H
24”
24”
24”
24”
24”
24”
24”
24”
24”
30”
30”
30”
30”
30”
30”
30”
30”
30”
36”
36”
36”
36”
36”
36”
36”
36”
36”
42”
42”
42”
42”
42”
42”
42”
42”
42”
48”
48”
48”
48”
48”
48”
48”
48”
48”
12”
13”
15”
18”
20”
24”
26”
30”
36”
12”
13”
15”
18”
20”
24”
26”
30”
36”
12”
13”
15”
18”
20”
24”
26”
30”
36”
12”
13”
15”
18”
20”
24”
26”
30”
36”
12”
13”
15”
18”
20”
24”
26”
30”
36”
1-1/8”
1-1/8”
1-1/8”
1-1/8”
1-1/8”
1-1/8”
1-1/8”
1-1/8”
1-1/8”
1-1/8”
1-1/8”
1-1/8”
1-1/8”
1-1/8”
1-1/8”
1-1/8”
1-1/8”
1-1/8”
1-1/8”
1-1/8”
1-1/8”
1-1/8”
1-1/8”
1-1/8”
1-1/8”
1-1/8”
1-1/8”
1-1/8”
1-1/8”
1-1/8”
1-1/8”
1-1/8”
1-1/8”
1-1/8”
1-1/8”
1-1/8”
1-1/8”
1-1/8”
1-1/8”
1-1/8”
1-1/8”
1-1/8”
1-1/8”
1-1/8”
1-1/8”
Est
Lbs.
5
5
7
9
8
14
15
18
20
6
6
9
10
10
15
16
19
21
7
7
9
11
11
16
17
20
22
8
8
10
12
13
17
22
21
23
8
8
12
14
15
17
18
22
26
List Price
21.80
24.00
33.20
37.80
40.00
44.30
46.50
60.50
72.30
23.50
25.70
34.90
39.80
42.00
47.60
52.00
63.70
75.60
25.10
27.20
36.40
41.40
44.60
50.70
55.10
66.90
79.10
31.00
34.30
41.20
47.70
56.50
61.60
81.30
76.90
90.40
34.40
38.90
48.20
55.50
61.10
71.50
77.10
86.10
104.00
Single/Double Entry.
All Shelves are punched on 2" centers to accept
Fixed Bin Dividers found on page 46.
1-1/8" high.
18 gauge.
All shelves require two HS-XXXX shelf supports.
HRXX shelf reinforcement for additional weight
capacity.
Double entry shelves include holes to accept
Unslotted Center Divider (CDXX) if needed.
TEL: 800-828-8018
www.datumfiling.com • sales@datumfiling.com
37
EFFECTIVE FEBRUARY 1, 2012
Prices and specifications subject to change without notice.
Component Parts - Wide Span Shelves, Unpunched
Use with standard 4post uprights 12", 13", 15", 18", 24', 30" and 36" deep. Load capacity 500 pounds
per shelf with maximum 1000 pounds per upright. All shelves require front to back reinforcements. All
front to back reinforcements bolt into position. Can be used with particle board shelves.
Item #
W
D
List Price
1260WSS
60”
12”
39.20
1360WSS
60”
13”
48.50
1560WSS
60”
15”
58.10
1860WSS
60”
18”
66.30
2460WSS
60”
24”
79.30
3060WSS
60”
30”
106.20
3660WSS
60”
36”
133.20
1266WSS
66”
12”
40.50
1366WSS
66”
13”
50.00
1566WSS
66”
15”
59.40
1866WSS
66”
18”
67.60
2466WSS
66”
24”
81.90
3066WSS
66”
30”
108.90
3666WSS
66”
36”
135.80
1272WSS
72”
12”
41.80
1372WSS
72”
13”
51.30
1572WSS
72”
15”
60.70
1872WSS
72”
18”
69.00
2472WSS
72”
24”
84.50
3072WSS
72”
30”
111.50
3672WSS
72”
36”
138.50
TEL: 800-828-8018
www.datumfiling.com • sales@datumfiling.com
38
EFFECTIVE FEBRUARY 1, 2012
Prices and specifications subject to change without notice.
Component Parts - Top Shelves 22 Gauge
TrakSlider Standard Duty Shelf Top
Item #
0924KS
1224KS
1324KS
1524KS
1824KS
2024KS
2424KS
2624KS
3024KS
3624KS
0930KS
1230KS
1330KS
1530KS
1830KS
2030KS
2430KS
2630KS
3030KS
3630KS
0936KS
1236KS
1336KS
1536KS
1836KS
2036KS
2436KS
2636KS
3036KS
3636KS
0942KS
1242KS
1342KS
1524KS
1842KS
2042KS
2442KS
2642KS
3042KS
3642KS
0948KS
1248KS
1348KS
1548KS
1848KS
2048KS
2448KS
2648KS
3048KS
3648KS
W
24”
24”
24”
24”
24”
24”
24”
24”
24”
24”
30”
30”
30”
30”
30”
30”
30”
30”
30”
30”
36”
36”
36”
36”
36”
36”
36”
36”
36”
36”
42”
42”
42”
42”
42”
42”
42”
42”
42”
42”
48”
48”
48”
48”
48”
48”
48”
48”
48”
48”
D
9”
12”
13”
15”
18”
20”
24”
26”
30”
36”
9”
12”
13”
15”
18”
20”
24”
26”
30”
36”
9”
12”
13”
15”
18”
20”
24”
26”
30”
36”
9”
12”
13”
15”
18”
20”
24”
26”
30”
36”
9”
12”
13”
15”
18”
20”
24”
26”
30”
36”
H
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
Pcs/Ctn
16
16
16
16
8
8
8
8
8
8
16
16
16
16
8
8
8
8
8
8
16
16
16
16
8
8
8
8
8
8
16
16
16
16
8
8
8
8
8
8
16
16
16
16
8
8
8
8
8
8
Est Lbs.
2
2
2
4
5
5
6
7
8
10
3
4
4
5
6
6
7
8
10
11
4
5
5
6
7
7
8
9
11
14
5
5
6
6
8
9
10
10
14
18
6
6
7
7
9
10
11
12
15
19
List Price
14.80
19.40
21.60
25.00
28.20
30.50
33.80
36.00
45.60
73.60
14.90
19.50
21.70
25.50
28.40
30.60
34.00
36.20
45.80
75.20
15.00
19.60
21.80
25.70
28.60
30.80
34.70
36.90
46.30
75.60
18.40
23.00
25.20
29.00
32.90
35.10
41.20
43.40
51.60
86.80
20.50
25.60
27.80
32.80
36.50
38.70
46.80
49.00
58.20
100.60
The Datum 4Post top shelf can be used in
conjunction with Datum's TrakSlider top shelf
support (see page 65) to create a 4Post
TrakSlider System (Bi, Tri, or Quad) or to
retrofit an existing system in the field. All
TrakSlider shelf tops are prepunched with
knockouts to accept mounting of overhead
anti-tip hardware, no drilling required.
3/4" high.
22 gauge.
All shelves require two SS-XXXX shelf supports.
TrakSlider Standard Duty Shelf Top should be used in conjunction with Datum Standard/Medium Duty 4Post Shelving.
TrakSlider Archive Shelf Top
Item #
1624KS
3224KS
1630KS
3230KS
1636KS
3236KS
1642KS
3242KS
1648KS
3248KS
W
24”
24”
30”
30”
36”
36”
42”
42”
48”
48”
D
16”
32”
16”
32”
16”
32”
16”
32”
16”
32”
H
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
Pcs/Ctn
16
8
16
8
16
8
16
8
16
8
TEL: 800-828-8018
Est Lbs.
4
9
6
11
7
12
7
15
8
16
www.datumfiling.com • sales@datumfiling.com
List Price
27.60
46.30
27.70
46.50
27.80
46.90
32.20
52.20
35.90
59.00
39
EFFECTIVE FEBRUARY 1, 2012
Prices and specifications subject to change without notice.
Component Parts - Top Shelves 18 Gauge
TrakSlider Heavy Duty Plus Shelf Top
Item #
0924KH
1224KH
1324KH
1524KH
1824KH
2024KH
2424KH
2624KH
3024KH
3624KH
0930KH
1230KH
1330KH
1530KH
1830KH
2030KH
2430KH
2630KH
3030KH
3630KH
0936KH
1236KH
1336KH
1536KH
1836KH
2036KH
2436KH
2636KH
3036KH
3636KH
0942KH
1242KH
1342KH
1524KH
1842KH
2042KH
2442KH
2642KH
3042KH
3642KH
0948KH
1248KH
1348KH
1548KH
1848KH
2048KH
2448KH
2648KH
3048KH
3648KH
W
24”
24”
24”
24”
24”
24”
24”
24”
24”
24”
30”
30”
30”
30”
30”
30”
30”
30”
30”
30”
36”
36”
36”
36”
36”
36”
36”
36”
36”
36”
42”
42”
42”
42”
42”
42”
42”
42”
42”
42”
48”
48”
48”
48”
48”
48”
48”
48”
48”
48”
D
9”
12”
13”
15”
18”
20”
24”
26”
30”
36”
9”
12”
13”
15”
18”
20”
24”
26”
30”
36”
9”
12”
13”
15”
18”
20”
24”
26”
30”
36”
9”
12”
13”
15”
18”
20”
24”
26”
30”
36”
9”
12”
13”
15”
18”
20”
24”
26”
30”
36”
H
1-1/8”
1-1/8”
1-1/8”
1-1/8”
1-1/8”
1-1/8”
1-1/8”
1-1/8”
1-1/8”
1-1/8”
1-1/8”
1-1/8”
1-1/8”
1-1/8”
1-1/8”
1-1/8”
1-1/8”
1-1/8”
1-1/8”
1-1/8”
1-1/8”
1-1/8”
1-1/8”
1-1/8”
1-1/8”
1-1/8”
1-1/8”
1-1/8”
1-1/8”
1-1/8”
1-1/8”
1-1/8”
1-1/8”
1-1/8”
1-1/8”
1-1/8”
1-1/8”
1-1/8”
1-1/8”
1-1/8”
1-1/8”
1-1/8”
1-1/8”
1-1/8”
1-1/8”
1-1/8”
1-1/8”
1-1/8”
1-1/8”
1-1/8”
Pcs/Ctn
12
12
12
6
8
8
6
6
4
4
12
12
12
6
8
8
6
6
4
4
12
12
12
6
8
8
6
6
4
4
12
12
12
6
8
8
6
6
4
4
12
12
12
6
8
8
6
6
4
4
Est Lbs.
5
5
5
7
9
8
14
15
18
20
5
6
6
8
10
10
15
16
19
21
6
7
7
9
11
11
16
17
20
22
7
8
8
10
12
13
17
22
21
23
7
8
8
12
14
15
17
18
22
26
List Price
17.40
21.80
24.00
33.20
37.80
40.00
44.30
46.50
60.50
72.30
18.90
23.50
25.70
34.90
39.80
42.00
47.60
52.00
63.70
75.60
20.20
25.10
27.20
36.40
41.40
44.60
50.70
55.10
66.90
79.10
24.70
31.00
34.30
41.20
47.70
56.50
61.60
81.30
76.90
90.40
27.60
34.40
38.90
48.20
55.50
61.10
71.50
77.10
86.10
104.00
1-1/8" high.
18 gauge.
All shelves require two HS-XXXX shelf supports.
TrakSlider Heavy Duty Shelf Top should be used in conjunction with Datum Heavy Duty or X-Ray 4Post Shelving.
TEL: 800-828-8018
www.datumfiling.com • sales@datumfiling.com
40
EFFECTIVE FEBRUARY 1, 2012
Prices and specifications subject to change without notice.
Library Shelving, Comp. Parts - Standard Duty Top Shelves
TrakSlider Library Standard Duty Shelf Top
Item #
0924KL
1224KL
1324KL
1524KL
1824KL
2024KL
2424KL
2624KL
3024KL
0930KL
1230KL
1330KL
1530KL
1830KL
2030KL
2430KL
2630KL
3030KL
0936KL
1236KL
1336KL
1536KL
1836KL
2036KL
2436KL
2636KL
3036KL
0942KL
1242KL
1342KL
1524KL
1842KL
2042KL
2442KL
2642KL
3042KL
0948KL
1248KL
1348KL
1548KL
1848KL
2048KL
2448KL
2648KL
3048KL
W
24”
24”
24”
24”
24”
24”
24”
24”
24”
30”
30”
30”
30”
30”
30”
30”
30”
30”
36”
36”
36”
36”
36”
36”
36”
36”
36”
42”
42”
42”
42”
42”
42”
42”
42”
42”
48”
48”
48”
48”
48”
48”
48”
48”
48”
D
9”
12”
15”
18”
24”
30”
9”
12”
15”
18”
24”
30”
9”
12”
15”
18”
24”
30”
9”
12”
15”
18”
24”
30”
9”
12”
15”
18”
24”
30”
H
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
3/4”
Pcs/Ctn
16
16
16
8
8
8
8
8
8
16
16
16
8
8
8
8
8
8
16
16
16
8
8
8
8
8
8
16
16
16
8
8
8
8
8
8
16
16
16
8
8
8
8
8
8
Est Lbs.
1
2
3
3
4
5
5
6
9
2
3
4
4
5
7
6
8
9
3
5
5
5
6
8
7
9
10
4
5
5
6
7
9
9
11
11
5
6
5
7
9
10
11
12
14
List Price
14.80
16.90
18.00
20.50
25.40
27.60
31.70
33.90
35.90
14.90
17.00
18.10
20.80
25.50
27.70
31.80
34.00
36.00
14.80
16.80
18.30
21.00
24.90
27.80
32.00
34.20
36.10
17.40
20.10
22.20
24.20
28.80
32.70
37.60
39.90
41.70
19.40
23.70
24.90
27.00
32.30
34.50
42.10
44.40
46.90
The Datum 4Post top shelf can be used in
conjunction with Datum's TrakSlider top shelf
support (see page 65) to create a 4Post
TrakSlider System (Bi, Tri, or Quad) or to
retrofit an existing system in the field. All
TrakSlider shelf tops are prepunched with
knockouts to accept mounting of overhead
anti-tip hardware, no drilling required.
3/4" high.
22 gauge.
All shelves require two SS-XXXX shelf supports.
TrakSlider Library Shelf Top should be used in conjunction with Datum Library 4Post Shelving.
TEL: 800-828-8018
www.datumfiling.com • sales@datumfiling.com
41
EFFECTIVE FEBRUARY 1, 2012
Prices and specifications subject to change without notice.
Component Parts - Shelf Supports & Reinforcements
Double Rivet Shelf Supports
Item # Gauge W
H
Pcs/Ctn Est Lbs.
Standard Duty Shelf Support
SS-2414
14
24” 3/4”
30
1
SS-3014
14
30” 3/4”
30
1
SS-3614
14
36” 3/4”
30
2
Medium Duty Shelf Support
MS-3611
11
36” 3/4”
30
3
MS-4211
11
42” 3/4”
30
3
MS-4811
11
48” 3/4”
30
3
Heavy Duty Shelf Support
HS-2414
14
24” 1-1/8”
30
1
HS-3014
14
30” 1-1/8”
30
1
HS-3614
14
36” 1-1/8”
30
2
HS-3611
11
36” 1-1/8”
30
3
HS-4211
11
42” 1-1/8”
30
3
HS-4811
11
48” 1-1/8”
30
4
List Price
5.60
5.70
5.90
Use with standard duty shelf.
Two required per shelf.
Use with SR-XX reinforcements.
Use with medium duty shelf.
Two required per shelf.
Use with SR-XX reinforcements.
7.60
8.80
10.10
5.70
5.90
6.10
8.10
9.20
10.50
Use with heavy duty shelf.
Two required per shelf.
Use with HR-XX reinforcements.
Single Rivet Shelf Supports
Item #
BS24
BS30
BS36
BS42
BS48
W
24”
30”
36”
42”
48”
H
1-1/4”
1-1/4”
1-1/4”
1-1/4”
1-1/4”
Pcs/Ctn
30
30
30
30
30
Est Lbs.
2
2
2
3
3
List Price
5.60
5.70
5.90
8.80
10.10
Use with standard, medium or heavy duty shelving.
Two required per shelf.
14 gauge.
Use with HR-XX reinforcements.
Single rivet supports secure unit to carriage on
TrakSlider System.
Can be used on bottom shelf resulting in flush fit
with floor.
Wide Span Shelf Supports
Item #
WSS-60
WSS-66
WSS-72
D
60”
66”
72”
H
3”
3”
3”
# Req/shelf
3
4
4
Shelf Reinforcements
Item #
SR12
SR13
SR15
SR16
SR18
SR20
SR24
SR26
SR30
SR32
SR36
D
12”
13”
15”
16”
18”
20”
24”
26”
30”
32”
36”
H
Pcs/Ctn Est Lbs.
5/8”
144
1
5/8”
144
1
5/8”
144
1
5/8”
144
1
5/8”
72
1
5/8”
72
1
5/8”
72
1
5/8”
36
1
5/8”
36
1
5/8”
36
1
5/8”
36
2
List Price
30.00
37.50
40.00
List Price
2.70
2.90
3.50
3.50
3.60
3.70
4.10
4.40
5.00
5.80
5.90
13 gauge steel.
Use with standard or medium duty shelf supports
(SS-XXXX or MS-XXXX).
Heavy Duty Shelf Reinforcements
Item #
HR09
HR12
HR13
HR15
HR16
HR18
HR20
HR24
HR26
HR30
HR32
HR36
D
9”
12”
13”
15”
16”
18”
20”
24”
26”
30”
32”
36”
H
1”
1”
1”
1”
1”
1”
1”
1”
1”
1”
1”
1”
Pcs/Ctn
96
96
96
96
96
48
48
48
48
48
48
24
Est Lbs.
1
1
1
1
1
1
1
2
2
2
2
2
List Price
2.80
3.50
3.60
3.70
3.80
3.80
4.00
4.70
4.90
5.60
6.50
6.80
13 gauge steel.
Use with heavy duty shelf supports or single
rivet shelf supports (HS-XXXX or BS-XX).
Wide Span Shelf Reinforcements
Item #
WSR-12
WSR-13
WSR-15
WSR-18
WSR-24
WSR-30
WSR-36
D
12”
13”
15”
18”
24”
30”
36”
List Price
17.50
18.20
18.80
21.20
22.50
25.00
28.00
TEL: 800-828-8018
www.datumfiling.com • sales@datumfiling.com
42
EFFECTIVE FEBRUARY 1, 2012
Prices and specifications subject to change without notice.
Component Parts - Kick Plates & Sectional Steel Back Panels
Kick Plate
Item #
QB2402
QB3002
QB3602
QB4202
QB4802
QB2404
QB3004
QB3604
QB4204
QB4804
Description
24” W x 2” H
30” W x 2” H
36” W x 2” H
42” W x 2” H
48” W x 2” H
24” W x 2” H
30” W x 2” H
36” W x 2” H
42” W x 2” H
48” W x 2” H
Est Lbs.
1
1
1
2
2
2
2
2
3
3
List Price
10.10
10.70
10.90
11.60
12.20
11.30
12.00
12.80
14.20
15.40
Kick Plate must be ordered with double rivet shelf support (page
42) dependent upon type of shelving ordered (standard, medium,
or heavy duty). Kick Plate is compatible with all 4Post™ shelves.
Sectional Steel Back Panels
Item #
W
H
Est Lbs.
List Price
RP-2440
24”
40”
12
90.40
RP-2464
24”
64”
19
113.60
RP-2476
24”
76”
21
124.40
RP-2485
24”
85”
23
135.80
RP-2488
24”
88”
24
138.50
RP-2497
24”
97”
26
159.90
RP-3040
30”
40”
14
93.60
RP-3064
30”
64”
22
116.90
RP-3076
30”
76”
25
128.00
RP-3085
30”
85”
27
139.10
RP-3088
30”
88”
29
141.80
RP-3097
30”
97”
32
163.30
RP-3640
36”
40”
17
97.10
PR-3664
36”
64”
26
120.40
RP-3676
36”
76”
30
131.50
RP-3685
36”
85”
32
142.70
RP-3688
36”
88”
34
145.30
RP-3697
36”
97”
37
166.80
RP-4240
42”
40”
21
106.40
RP-4264
42”
64”
28
134.60
RP-4276
42”
76”
36
147.80
RP-4285
42”
85”
39
158.10
RP-4288
42”
88”
42
161.10
RP-4297
42”
97”
45
194.70
RP-4840
48”
40”
23
115.60
RP-4864
48”
64”
35
146.30
RP-4876
48”
76”
41
162.20
RP-4885
48”
85”
44
178.00
RP-4888
48”
88”
47
179.40
RP-4897
48”
97”
51
208.40
TEL: 800-828-8018
www.datumfiling.com • sales@datumfiling.com
Each back section will include a form channel on the
top and bottom and include punched holes for joining
sections together. Backs of 40" high are one piece,
backs of 64" high are two piece, and up to 97" high
are three piece construction. Sectional back panels add
3/8" to overall depth of shelving.
43
EFFECTIVE FEBRUARY 1, 2012
Prices and specifications subject to change without notice.
Component Parts - Back/Center Stops and Dividers
Slotted Back Stop
Item #
SB24
SB30
SB36
SB42
SB48
W
24”
30”
36”
42”
48”
H
2”
2”
2”
2”
2”
Pcs/Ctn
40
40
40
40
40
Est Lbs.
1
1
1
2
2
List Price
7.60
8.00
8.50
9.10
9.70
List Price
9.30
9.70
To be used with adjustable file dividers on
single entry shelf units.
Slotted Center Stop
Item #
CSSL24
CSSL30
W
24”
30”
H
2”
2”
Pcs/Ctn
20
20
Est Lbs.
1
1
CSSL36
36”
2”
20
1
10.70
CSSL42
CSSL48
CS24
CS30
CS36
CS42
CS48
42”
48”
24”
30”
36”
42”
48”
2”
2”
4”
4”
4”
4”
4”
20
20
20
20
20
20
20
2
2
2
2
2
3
3
12.00
12.50
8.70
9.10
10.10
11.10
11.90
To be used with adjustable file dividers
on double entry shelf units.
Slotted X-Ray Center Stop
Item #
SX24
SX30
SX36
SX42
SX48
W
24”
30”
36”
42”
48”
H
7”
7”
7”
7”
7”
Pcs/Ctn
18
18
18
18
18
Est Lbs.
3
3
4
5
5
List Price
15.60
15.80
15.90
18.40
21.60
To be used with adjustable X-Ray file dividers
on double entry X-Ray shelf units.
Unslotted Center Divider
Item #
CD242
CD302
CD362
CD422
CD482
CD24
CD30
CD36
CD42
CD48
W
24”
30”
36”
42”
48”
24”
30”
36”
42”
48”
H
2”
2”
2”
2”
2”
4”
4”
4”
4”
4”
Pcs/Ctn
40
40
40
40
40
40
40
40
40
40
Est Lbs.
1
1
2
2
2
2
2
2
3
3
List Price
7.60
8.10
8.80
10.10
10.60
8.30
8.80
9.10
9.70
10.40
To be used as a center divider
for unslotted double entry shelving.
Dividers
Item #
FDL
FDSL
FDL10
FDL-18S
FDL35
FDB
FDSB
D
11”
11”
11”
17”
11”
9”
9”
H
8”
4”
8”
8”
8”
8”
4”
Pcs/Ctn
1
1
10
1
35
1
1
Est Lbs.
1
1
9
2
30
1
1
List Price
3.70
5.10
36.40
7.30
127.40
4.00
4.00
FDL to be used with single and/or double entry shelves.
FDB – for 9" deep Library Shelving.
FDSL – for low profile media applications. To be used
with CSSLXX Slotted Center Stops only for double entry
applications. Use Standard Slotted Back Stops for single
entry applications.
FDL-18S to be used with 18" or 36" deep standard duty
shelving.
X-Ray Divider
Item #
D
H
Description
Est Lbs.
List Price
FDX
17”
11”
One divider
2
9.20
FDXS
17”
11”
Pkg. of 5
12
46.30
FDX20
17”
11”
Pkg. of 20
46
185.00
TEL: 800-828-8018
www.datumfiling.com • sales@datumfiling.com
44
To be used with single and/or double
entry slotted X-Ray shelves.
EFFECTIVE FEBRUARY 1, 2012
Prices and specifications subject to change without notice.
Component Parts - Reference Shelves, Cut Charges, and Misc.
Reference Shelves
Item #
W
D
Pcs/Ctn
Est Lbs.
Reference Shelf Kit
RSK12
30”
12”
1
9
RSK13
30”
13”
1
9
RSK15
30”
15”
1
9
RSK16
30”
16”
1
9
RSK18
30”
18”
1
10
RSK20
30”
20”
1
10
RSK24
30”
24”
1
11
RSK26
30”
26”
1
11
RSK30
30”
30”
1
11
RSK32
30”
32”
1
13
RSK36
30”
36”
1
13
Reference Shelf (Includes pull-out suspension)
RSA
30” 11-7/8”
1
8
List Price
72.90
72.90
72.90
72.90
72.90
72.90
79.50
79.50
79.50
79.50
79.50
72.90
The above part numbers apply to 36", 42" and 48" wide shelving only.
Reference shelves are also available for 24" and 30" wide shelving.
To order shelf for 24" wide shelving, add "24" to the end of the part number. Ex: RSK1224
To order shelf for 30" wide shelving, add "30" to the end of the part number. Ex: RSK1230
Pricing will remain the same.
*Refers to depth of shelf to which Reference Shelf is being mounted. For example, a RSK12 Reference Shelf Kit would be ordered for
a 12" deep shelf. All shelves include mounting brackets and one pull out reference shelf. For double entry applications, order an additional reference shelf (RSA). One shelf opening will be reduced by 1". Actual Reference Shelf dimensions: 30" W x 11-7/8" D.
Index Holder
Item#
Description
Est Lbs.
List Price
5205N
Self Adhesive Index Holder
1
24.40
5205D
Datum Label Holder
1
31.50
5205D
Wall Tie
Item#
Description
Est Lbs.
List Price
4P-WT
1 Wall Tie
1
23.80
4P-WT
Library Book End
Item #
Description
D
H
Est Lbs.
List Price
LBE-4
Set of 4
4-1/2”
6”
4
55.80
Available in T25 Black paint only.
Sample Kit
Item#
Description
Est Lbs.
List Price
4P-DK
4Post Sample Kit
48
606.40
4Post™ Library Book End
Contact Datum for a list of individual parts.
Touch-Up Paint*
Item #
Description
Est Lbs.
List Price
TU#15
Bone White touch up paint
4.5 oz
21.10
TU#86
Gray touch up paint
4.5 oz
21.10
T O U CH UP
PAIN T
*Touch up paint is not textured.
Custom Upright Charge
Item#
Description
List Price
Cut Charge
L&T Upright (each)
11.00
Custom size uprights are available up to 97-1/4" high and must be sized based on 1-1/2" increments.
Use next higher upright height when ­calculating cut charges.
Note: Adjusting upright height will effect clear height requirements between shelves and may limit the
ability to use Reference Shelves and/or Bin Dividers.
Bin dividers cannot be used on the top shelf when unit is mounted on a TrakSlider™ System.
Refer to the 4Post™ Standard Shelf Spacing Chart found on pages 72 and 73 for more information.
TEL: 800-828-8018
www.datumfiling.com • sales@datumfiling.com
45
EFFECTIVE FEBRUARY 1, 2012
Prices and specifications subject to change without notice.
Component Parts - Bin Dividers & EasyRoller Systems
Bin Dividers
Item #
BD1206
BD1209
BD1212
BD1213.5
BD1215
BD1216.5
BD1218
BD1306
BD1309
BD1313
BD1315
BD1316.5
BD1318
BD1506
BD1509
BD1512
BD1513.5
BD1515
BD1516.5
BD1518
BD1806
BD1809
BD1812
BD1813.5
BD1815
BD1816.5
BD1818
BD2006
BD2009
BD2013
BD2015
BD2016.5
BD2018
D
12”
12”
12”
12”
12”
12”
12”
13”
13”
13”
13”
13”
13”
15”
15”
15”
15”
15”
15”
15”
18”
18”
18”
18”
18”
18”
18”
20”
20”
20”
20”
20”
20”
H
Shelf Openings
6”
4-3/4”
9”
7-3/4”
12”
10-3/4”
13-1/2”
12-1/4”
15”
13-3/4”
16-1/2”
15-1/4”
18”
16-3/4”
6”
4-3/4”
9”
7-3/4”
13”
12-1/4”
15”
13-3/4”
16-1/2”
15-1/4”
18”
16-3/4”
6”
4-3/4”
9”
7-3/4”
12”
10-3/4”
13-1/2”
12-1/4”
15”
13-3/4”
16-1/2”
15-1/4”
18”
16-3/4”
6”
4-3/4”
9”
7-3/4”
12”
10-3/4”
13-1/2”
12-1/4”
15”
13-3/4”
16-1/2”
15-1/4”
18”
16-3/4”
6”
4-3/4”
9”
7-3/4”
13”
12-1/4”
15”
13-3/4”
16-1/2”
15-1/4”
18”
16-3/4”
Pcs/Ctn
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
Est Lbs.
1
2
2
2
3
3
4
1
2
2
3
3
4
2
2
2
2
2
3
3
2
2
3
3
3
3
4
2
2
3
3
3
4
List Price
10.10
10.80
11.90
12.40
12.80
13.20
13.70
6.80
7.80
9.30
10.20
10.70
11.40
10.70
11.90
12.90
13.50
14.30
14.60
14.90
11.20
14.00
14.40
14.70
15.30
16.00
16.70
8.20
9.30
10.70
12.60
13.30
14.20
Use with XXXXPH Punched Shelves only found on page
37. Includes all ­necessary mounting hardware.
EasyRoller Single Entry Units
EasyRoller Double Entry Units
Item #
ER12S
ER13S
ER15S
ER16S
ER18S
ER20S
ER24S
ER26S
ER30S
ER32S
ER36S
Item #
Depth
Est Lbs.
List Price
ER24D
24”
3
81.20
ER26D
26”
3
81.20
ER30D
30”
4
94.20
ER32D
32”
4
100.60
ER36D
36”
4
107.00
Depth
12”
13”
15”
16”
18”
20”
24”
26”
30”
32”
36”
Est Lbs.
2
2
2
2
2
2
3
3
3
3
4
List Price
35.80
35.80
42.20
48.70
55.20
55.20
68.10
81.20
81.20
87.70
94.20
Single Entry
Double Entry
EasyRoller Book Dividers
Item #
Depth
Est Lbs. List Price
ER12
12”
1
18.20
ER13
13”
1
18.20
ER15
15”
2
18.50
ER16
16”
2
19.10
ER18
18”
2
19.50
ER20
20”
2
19.50
ER24
24”
2
21.50
ER26
26”
2
21.50
ER30
30”
2
23.40
ER32
32”
2
24.40
Divider
ER36
36”
3
25.40
How to Order:
Specify with two Standard Duty 4Post™ shelf supports found on page 42. Refer to page 72-73 for standard clear height
opening requirements. Specify two Easy Rollers per book up to 18" book height. Dividers can be specified to keep books separated on
shelf. Manufactured of 22 gauge steel with a minimum of (4) nylon rollers.
TEL: 800-828-8018
www.datumfiling.com • sales@datumfiling.com
46
EFFECTIVE FEBRUARY 1, 2012
Prices and specifications subject to change without notice.
Component Parts - Garment/Fabric Sample Rods
Use the part numbers below to order garment rod components separately.
Garment/Fabric Sample Rods
Item #
Description
Est Lbs.
List Price
GT24
24” Garment/Fabric Rod (each)
2
28.70
GT30
30” Garment/Fabric Rod (each)
3
33.40
GT36
36” Garment/Fabric Rod (each)
3
35.30
GT42
42” Garment/Fabric Rod (each)
4
37.40
GT48
48” Garment/Fabric Rod (each)
4
38.60
GB09
9” Mounting Bracket (pair)
2
28.90
GB12
12” Mounting Bracket (pair)
2
30.30
GB13
13” Mounting Bracket (pair)
2
31.40
GB15
15” Mounting Bracket (pair)
3
33.10
GB18
18” Mounting Bracket (pair)
3
36.00
GB20
20” Mounting Bracket (pair)
3
40.80
GB24
24” Mounting Bracket (pair)
5
50.50
GB26
26” Mounting Bracket (pair)
5
51.60
GB30
30” Mounting Bracket (pair)
6
53.30
GB36
36” Mounting Bracket (pair)
7
56.10
Rod mounting holes are punched on 2" centers for easy adjustment.
Rods are 1-1/2" diameter galvanized coated steel tube and require (1) pair of Mounting Brackets per row.
Must specify paint color for Mounting Brackets.
Includes all necessary mounting hardware.
4Post™
TEL: 800-828-8018
www.datumfiling.com • sales@datumfiling.com
47
EFFECTIVE FEBRUARY 1, 2012
Prices and specifications subject to change without notice.
Component Parts - Magazine Doors
The retractable door provides a place to store the latest edition of a magazine while the back
issues are stored neatly on a shelf behind the retractable door. Door swings up and retracts into
the shelving unit. Magazine Doors are available for units 24" Wide through 48" Wide. Magazine
Doors are only compatible with 11-1/4" openings.
Magazine Door - 24"W
Item #
Description
Est Lbs.
List Price
MD-2409
Single Entry for 9”D Unit
7
65.70
MD-2412
Single Entry for 12”D Unit
7
65.70
MD-2413
Single Entry for 13”D Unit
7
65.70
MD-2415
Single Entry for 15”D Unit
7
65.70
MD-2416
Single Entry for 16”D Unit
7
65.70
MD-2418
Single Entry for 18”D Unit
7
65.70
MD-2424
Single Entry for 24”D Unit
7
65.70
MD-2430
Single Entry for 30”D Unit
8
70.10
MD-2432
Single Entry for 32”D Unit
8
70.10
MD-2436
Single Entry for 36”D Unit
8
70.10
MD-24A
Add-on to make Double Entry
6
54.70
Est Lbs.
List Price
Magazine Door - 30"W
Item #
Description
MD-3009
Single Entry for 9”D Unit
8
67.10
MD-3012
Single Entry for 12”D Unit
8
67.10
MD-3013
Single Entry for 13”D Unit
8
67.10
MD-3015
Single Entry for 15”D Unit
8
67.10
MD-3016
Single Entry for 16”D Unit
8
67.10
MD-3018
Single Entry for 18”D Unit
8
67.10
MD-3024
Single Entry for 24”D Unit
8
67.10
MD-3030
Single Entry for 30”D Unit
9
71.50
MD-3032
Single Entry for 32”D Unit
9
71.50
MD-3036
Single Entry for 36”D Unit
9
71.50
MD-30A
Add-on to make Double Entry
6
56.10
Magazine Door - 36"W
Item #
Description
Est Lbs.
List Price
MD-3609
Single Entry for 9”D Unit
9
68.70
MD-3612
Single Entry for 12”D Unit
9
68.70
MD-3613
Single Entry for 13”D Unit
9
68.70
MD-3615
Single Entry for 15”D Unit
9
68.70
MD-3616
Single Entry for 16”D Unit
9
68.70
MD-3618
Single Entry for 18”D Unit
9
68.70
MD-3624
Single Entry for 24”D Unit
9
68.70
MD-3630
Single Entry for 30”D Unit
10
73.10
MD-3632
Single Entry for 32”D Unit
10
73.10
MD-3636
Single Entry for 36”D Unit
10
73.10
MD-36A
Add-on to make Double Entry
8
57.60
TEL: 800-828-8018
www.datumfiling.com • sales@datumfiling.com
48
EFFECTIVE FEBRUARY 1, 2012
Prices and specifications subject to change without notice.
Component Parts - Magazine Doors Continued
Magazine Door - 42"W
Item #
Description
Est Lbs.
List Price
MD-4209
Single Entry for 9”D Unit
10
70.10
MD-4212
Single Entry for 12”D Unit
10
70.10
MD-4213
Single Entry for 13”D Unit
10
70.10
MD-4215
Single Entry for 15”D Unit
10
70.10
MD-4216
Single Entry for 16”D Unit
10
70.10
MD-4218
Single Entry for 18”D Unit
10
70.10
MD-4224
Single Entry for 24”D Unit
10
70.10
MD-4230
Single Entry for 30”D Unit
11
74.60
MD-4232
Single Entry for 32”D Unit
11
74.60
MD-4236
Single Entry for 36”D Unit
11
74.60
MD-42A
Add-on to make Double Entry
9
59.10
Description
Est Lbs.
List Price
MD-4809
Single Entry for 9”D Unit
11
73.70
MD-4812
Single Entry for 12”D Unit
11
73.70
MD-4813
Single Entry for 13”D Unit
11
73.70
MD-4815
Single Entry for 15”D Unit
11
73.70
MD-4816
Single Entry for 16”D Unit
11
73.70
MD-4818
Single Entry for 18”D Unit
11
73.70
MD-4824
Single Entry for 24”D Unit
11
73.70
MD-4830
Single Entry for 30”D Unit
12
78.10
MD-4832
Single Entry for 32”D Unit
12
78.10
MD-4836
Single Entry for 36”D Unit
12
78.10
MD-48A
Add-on to make Double Entry
10
60.50
Magazine Door - 48"W
Item #
TEL: 800-828-8018
www.datumfiling.com • sales@datumfiling.com
49
EFFECTIVE FEBRUARY 1, 2012
Prices and specifications subject to change without notice.
Component Parts - Hinged Doors, Plan Storage
Hinged Doors
Item #
HD2-2464
HD2-3064
HD2-3664
HD2-4264
HD2-4864
HD2-2476
HD2-3076
HD2-3676
HD2-4276
HD2-4876
HD2-2485
HD2-3085
HD2-3685
HD2-4285
HD2-4885
HD2-2488
HD2-3088
HD2-3688
HD2-4288
HD2-4888
24”W
30”W
36”W
42”W
48”W
24”W
30”W
36”W
42”W
48”W
24”W
30”W
36”W
42”W
48”W
24”W
30”W
36”W
42”W
48”W
Description
x 64.25”H (with lock)
x 64.25”H (with lock)
x 64.25”H (with lock)
x 64.25”H (with lock)
x 64.25”H (with lock)
x 76.25”H (with lock)
x 76.25”H (with lock)
x 76.25”H (with lock)
x 76.25”H (with lock)
x 76.25”H (with lock)
x 85.25”H (with lock)
x 85.25”H (with lock)
x 85.25”H (with lock)
x 85.25”H (with lock)
x 85.25”H (with lock)
x 88.25”H (with lock)
x 88.25”H (with lock)
x 88.25”H (with lock)
x 88.25”H (with lock)
x 88.25”H (with lock)
Est Lbs.
50
55
60
65
70
55
60
65
70
75
55
63
68
73
78
60
65
70
75
80
List Price
467.50
499.50
533.60
566.70
594.30
507.20
540.20
573.30
607.50
634.00
540.20
566.70
600.90
634.00
667.10
546.80
573.30
607.50
640.60
673.70
List Price
571.00
588.00
605.00
622.00
639.00
596.00
613.00
630.00
647.00
664.00
621.00
638.00
655.00
672.00
689.00
631.00
648.00
665.00
682.00
699.00
* when including hinged doors on a mobile carriage, add 2” to the overall depth of the carriage.
Plan Storage Dividers
Item #
PD1206
PD1306
PD1506
PD1806
PD2006
PD2406
PD2606.
PD3006
PD3206
PD3606
Dimensions
12”D
13”D
15”D
18”D
20”D
24”D
26”D
30”D
32”D
36”D
X
X
X
X
X
X
X
X
X
X
Est Lbs. List Price List Price
6”H
6”H
6”H
6”H
6”H
6”H
6”H
6”H
6”H
6”H
2
2
2
2
2
3
3
3
3
3
11.20
11.30
11.60
11.90
12.10
12.30
12.40
12.70
12.90
13.40
11.80
11.90
12.20
12.50
12.70
12.90
13.00
13.30
13.50
14.10
* Used in conjunction with standard duty punched shelves.
Sold separately. See page 37 for pricing information.
CD Storage
Item #
CD24SP
CD30SP
CD36SP
CD42SP
CD48SP
Description
2 tier
2 tier
2 tier
2 tier
2 tier
W
24”
30”
36”
42”
48”
D
11-3/4”
11-3/4”
11-3/4”
11-3/4”
11-3/4”
H
10-3/4”
10-3/4”
10-3/4”
10-3/4”
10-3/4”
Est. Lbs.
9
11
13
15
17
List Price
101.40
110.70
120.00
129.50
140.20
Item #
Description
D
H
Est. Lbs.
List Price
CDD
2 pack of dividers
5-1/2”
5”
0.5
9.80
*Includes everything for (1) double level unit. Works with standard 4Post™ (light, medium, and
heavy duty and library). Compatible with hinged and tambour doors. Can't be used on shelving
deeper than 12”, used back to back on minimum depth of 24”.
76-1/4" high shelving = 7 openings, 88-1/4" high shelving = 8 openings, 97-1/4" high shelving = 9
openings.
Shelf spacing is 9-3/4" clear.
Requires quick base and top cover for stability. On systems over 4 tiers high a drawer reinforcement
is required.
Shelf is 20 gauge, sides are 16 gauge, mounts are 14 gauge, and divider is 20 gauge steel.
Shelf capacity is 100 pounds evenly distributed (based on standard CD case at .42” thick).
TEL: 800-828-8018
www.datumfiling.com • sales@datumfiling.com
50
EFFECTIVE FEBRUARY 1, 2012
Prices and specifications subject to change without notice.
Athletic Ball Storage
Single Entry
Item #
D
W
SFBS1224
SFBS1524
SFBS1824
SFBS2424
SFBS3024
SFBS3624
SFBS1230
SFBS1530
SFBS1830
SFBS2430
SFBS3030
SFBS3630
SFBS1236
SFBS1536
SFBS1836
SFBS2436
SFBS3036
SFBS3636
SFBS1242
SFBS1542
SFBS1842
SFBS2442
SFBS3042
SFBS3642
SFBS1248
SFBS1548
SFBS1848
SFBS2448
SFBS3048
SFBS3648
12”
15”
18”
24”
30”
36”
12”
15”
18”
24”
30”
36”
12”
15”
18”
24”
30”
36”
12”
15”
18”
24”
30”
36”
12”
15”
18”
24”
30”
36”
24”
24”
24”
24”
24”
24”
30”
30”
30”
30”
30”
30”
36”
36”
36”
36”
36”
36”
42”
42”
42”
42”
42”
42”
48”
48”
48”
48”
48”
48”
Est Lbs. List Price
6
7
7
9
10
11
8
9
9
11
12
13
8
9
9
11
12
13
10
11
11
13
14
15
10
11
11
13
14
15
40.00
40.80
42.00
43.10
44.90
45.20
44.20
45.00
46.20
47.30
49.10
59.90
48.40
49.20
50.40
51.50
53.30
53.60
52.60
53.40
54.60
55.70
57.50
57.80
56.80
57.60
58.80
59.90
61.70
62.00
Double Entry
Item #
D
W
DFBS2424
DFBS3024
DFBS3624
DFBS2430
DFBS3030
DFBS3630
DFBS2436
DFBS3036
DFBS3636
DFBS2442
DFBS3042
DFBS3642
DFBS2448
DFBS3048
DFBS3648
24”
30”
36”
24”
30”
36”
24”
30”
36”
24”
30”
36”
24”
30”
36”
24”
24”
24”
30”
30”
30”
36”
36”
36”
42”
42”
42”
48”
48”
48”
Est Lbs. List Price
18
20
22
22
24
26
22
24
26
26
28
30
26
28
30
62.20
63.90
64.40
70.60
72.30
72.80
79.00
80.70
81.20
87.40
89.10
89.60
95.80
93.80
97.50
Wire Divider
Item #
Description
14
List Price
WD8
8” Wire Divider
1
18.50
WD12
12” Wire Divider
1
20.70
TEL: 800-828-8018
www.datumfiling.com • sales@datumfiling.com
51
EFFECTIVE FEBRUARY 1, 2012
Prices and specifications subject to change without notice.
Golf Bag Storage & Complete Garment Racks
Single Entry Golf Bag Storage
Item #
D
W
Est Lbs. List Price
SFGB1530
15”
30”
21
111.70
SFGB1830
18”
30”
21
115.50
SFGB1536
15”
36”
21
120.10
SFGB1836
18”
36”
21
123.90
SFGB1542
15”
42”
25
128.50
SFGB1842
18”
42”
25
132.30
SFGB1548
15”
48”
25
136.90
SFGB1848
18”
48”
25
140.70
Double Entry Golf Bag Storage
Item #
D
W
Est Lbs. List Price
DFGB3030
15”
30”
42
170.50
DFGB3630
18”
30”
42
171.20
DFGB3036
15”
36”
42
187.30
DFGB3636
18”
36”
42
188.00
DFGB3042
15”
42”
50
204.10
DFGB3642
18”
42”
50
204.80
DFGB3048
15”
48”
50
220.90
DFGB3648
18”
48”
50
221.60
Single Entry Garment Rack
Item #
D
W
Est Lbs. List Price
W1542
15"
42"
6
47.30
W1548
15"
48"
7
52.50
W2442
24"
42"
8
57.80
W2448
24"
48"
9
63.00
W3042
30"
42"
10
68.30
W3048
30"
48"
11
73.50
Double Entry Garment Rack
Item #
D
W
Est Lbs. List Price
W2442D
24"
42"
11
60.40
W2448D
24"
48"
12
65.60
W3042D
30"
42"
13
76.10
W3048D
30"
48"
14
81.40
Garment racks are sold as a complete unit. To purchase components separately, refer to page 47.
TEL: 800-828-8018
www.datumfiling.com • sales@datumfiling.com
52
EFFECTIVE FEBRUARY 1, 2012
Prices and specifications subject to change without notice.
Hanging Folder Drawer Frames & Drawer Reinforcements
When using pull out drawers with any 4Post™ shelving, the top of any drawer cannot be
above 54" and all single entry units must be securely attached to the wall or floor.
W
LFI Est Lbs. List Price
Item #
W
LFI Est Lbs. List Price
24”
21
1824HFS
24”
21
1830HFS
30”
1836HFS
36”
1842HFS
42”
1848HFS
48”
1824HFD
24”
1830HFD
30”
52
16
342.90
1836HFD
36”
64
20
353.00
1842HFD
42”
76
24
360.20
1848HFD
48”
88
28
367.40
5
158.60
1530HFS
30”
26
6
162.80
1536HFS
36”
32
8
165.70
1542HFS
42”
38
10
169.90
1548HFS
48”
44
12
172.90
1524HFD
24”
42
10
317.00
1530HFD
30”
52
12
324.10
1536HFD
36”
64
16
331.30
1542HFD
42”
76
20
338.60
1548HFD
48”
88
24
345.80
L
E
G
A
L
Frames are designed to accommodate letter size media (left
to right filing). Specify 15" and or 30" deep 4Post™ uprights.
Use FTB Rails for front to back filing. All frames are placed
on 10-1/2" centers for 9-3/4" clear vertical height. *Capacity
based on hanging folders stored left-to-right
Single Entry
Item #
1524HFS
Double Entry
Double Entry
L
E
T
T
E
R
Single Entry
Hanging Folder Frames
7
168.50
26
8
171.50
32
10
175.90
37
12
178.60
44
14
181.50
42
15
337.20
Frames are designed to accommodate legal size media (left
to right filing). Specify 18" and/or 36" deep 4Post™ uprights.
Use FTB Rails for front to back filing. All frames are placed
on 10-1/2" centers for 9-3/4" clear vertical height. *Capacity
based on hanging folders stored left-to-right
Front to Back Rail
Item #
Description
Est Lbs.
List Price
FTB15
Letter Depth (each)
1
7.10
FTB18
Legal Depth (each)
1
8.70
Specify two FTB rails per row of filing.
Drawer Reinforcement
Item #
DR243
DR303
DR363
DR423
DR483
Description
3" X 24" (each)
3" X 30" (each)
3" X 36" (each)
3" X 42" (each)
3" X 48" (each)
Drawer Filler
Item #
DF244
DF304
DF364
DF424
DF484
DF246
DF306
DF366
DF426
DF486
DF247
DF307
DF367
DF427
DF487
Description
5" X 24" (each)
5" X 30" (each)
5" X 36" (each)
5" X 42" (each)
5" X 48" (each)
6" X 24" (each)
6" X 30" (each)
6" X 36" (each)
6" X 42" (each)
6" X 48" (each)
7 X 24" (each)
7" X 30" (each)
7" X 36" (each)
7" X 42" (each)
7" X 48" (each)
W
24"
30"
36"
42"
48"
W
24"
30"
36"
42"
48"
24"
30"
36"
42"
48"
24"
30"
36"
42"
48"
TEL: 800-828-8018
H
3"
3"
3"
3"
3"
One pair of Drawer Reinforcements are required for every 4 levels of drawers.
Drawer Reinforcements provide added strength and rigidity to unit.
H
4-1/2"
4-1/2"
4-1/2"
4-1/2"
4-1/2"
6"
6"
6"
6"
6"
7-1/2"
7-1/2"
7-1/2"
7-1/2"
7-1/2"
www.datumfiling.com • sales@datumfiling.com
Est Lbs.
2
3
3
5
5
Est Lbs.
3
4
5
6
6
4
5
6
6
7
4
5
6
6
7
List Price
12.40
12.80
17.60
19.80
22.50
List Price
13.80
14.10
19.10
21.40
23.90
15.30
15.50
20.50
22.80
25.40
16.80
17.00
21.90
24.30
26.80
53
EFFECTIVE FEBRUARY 1, 2012
Prices and specifications subject to change without notice.
Pull Out Storage Drawers
Drawers include solid bottom. Can accommodate storage drawer kits for partitioning.
Optional locks available on 6" drawers and larger.
3" Storage Drawers
Usable
Double
Entry
Single Entry
L
E
G
A
L
Double
Entry
L
E
T
T
E
R
Single Entry
Item #
Dimensions
W
D
H
LFI Est Lbs. List Price
SD2412030
24”W x 3”H
19-1/2” 10-13/32”
2-7/8”
20
9
177.00
SD3012030
30”W x 3”H
25-1/2” 10-13/32”
2-7/8”
26
12
190.40
SD3612030
36”W x 3”H
31-1/2” 10-13/32”
2-7/8”
32
15
203.70
SD22412030
24”W x 3”H
19-1/2” 10-13/32”
2-7/8”
40
22
355.30
SD23012030
30”W x 3”H
25-1/2” 10-13/32”
2-7/8”
52
29
382.00
SD23612030
36”W x 3”H
31-1/2” 10-13/32”
2-7/8”
64
35
408.70
SD2415030
24”W x 3”H
19-1/2” 10-13/32”
2-7/8”
20
12
190.40
SD3015030
30”W x 3”H
25-1/2” 10-13/32”
2-7/8”
26
16
203.70
SD3615030
36”W x 3”H
31-1/2” 10-13/32”
2-7/8”
32
18
217.00
SD22415030
24”W x 3”H
19-1/2” 10-13/32”
2-7/8”
40
27
382.00
SD23015030
30”W x 3”H
25-1/2” 10-13/32”
2-7/8”
52
34
408.70
SD23615030
36”W x 3”H
31-1/2” 10-13/32”
2-7/8”
64
41
435.30
* Locks not available.
4-1/2" Storage Drawers
Usable
Double
Entry
Single Entry
L
E
G
A
L
Double
Entry
L
E
T
T
E
R
Single Entry
Item #
Dimensions
W
D
H
LFI Est Lbs. List Price
SD2412045
24”W X 4-1/2”H 19-1/2” 10-13/32” 3-7/8”
20
10
184.40
SD3012045
30”W x 4-1/2”H 25-1/2” 10-13/32” 3-7/8”
26
13
197.70
SD3612045
36”W x 4-1/2”H 31-1/2” 10-13/32” 3-7/8”
32
16
211.10
SD22412045 24”W X 4-1/2”H 19-1/2” 10-13/32” 3-7/8”
40
23
368.70
SD23012045 30”W x 4-1/2”H 25-1/2” 10-13/32” 3-7/8”
52
30
377.20
SD23612045 36”W x 4-1/2”H 31-1/2” 10-13/32” 3-7/8”
64
36
422.00
SD2415045
24”W X 4-1/2”H 19-1/2” 10-13/32” 3-7/8”
20
13
197.70
SD3015045
30”W x 4-1/2”H 25-1/2” 10-13/32” 3-7/8”
26
17
211.10
SD3615045
36”W x 4-1/2”H 31-1/2” 10-13/32” 3-7/8”
32
19
224.40
SD22415045 24”W X 4-1/2”H 19-1/2” 10-13/32” 3-7/8”
40
28
395.30
SD23015045 30”W x 4-1/2”H 25-1/2” 10-13/32” 3-7/8”
52
35
422.00
SD23615045 36”W x 4-1/2”H 31-1/2” 10-13/32” 3-7/8”
64
42
448.80
* Locks not available.
TEL: 800-828-8018
www.datumfiling.com • sales@datumfiling.com
54
EFFECTIVE FEBRUARY 1, 2012
Prices and specifications subject to change without notice.
Pull Out Storage Drawers, Continued
Drawers include solid bottom. Can accommodate storage drawer kits for partitioning. Lock optional.
6" Storage Drawers
Usable
Non-Locking
Non-Locking
Locking
Double Entry
L
E
G
A
L
Non-Locking
Locking
Single Entry
Locking
Double Entry
L
E
T
T
E
R
Non-Locking
Locking
Single Entry
Item #
Dimensions
W
D
H
LFI Est Lbs. List Price
SD2412060
24”W x 6”H
19-1/2” 10-13/32” 5-3/8”
20
11
203.70
SD3012060
30”W x 6”H
25-1/2” 10-13/32” 5-3/8”
26
14
217.00
SD3612060
36”W x 6”H
31-1/2” 10-13/32” 5-3/8”
32
17
230.50
SD4212060
42”W x 6”H
37-1/2” 10-13/32” 5-3/8”
38
20
270.50
SD4812060
48”W x 6”H
43-1/2” 10-13/32” 5-3/8”
44
23
310.50
SD2412060L
24”W x 6”H
19-1/2” 10-13/32” 5-3/8”
20
12
224.40
SD3012060L
30”W x 6”H
25-1/2” 10-13/32” 5-3/8”
26
15
237.70
SD3612060L
36”W x 6”H
31-1/2” 10-13/32” 5-3/8”
32
18
251.10
SD4212060L
42”W x 6”H
37-1/2” 10-13/32” 5-3/8”
38
21
291.10
SD4812060L
48”W x 6”H
43-1/2” 10-13/32” 5-3/8”
44
24
331.10
SD22412060
24”W x 6”H
19-1/2” 10-13/32” 5-3/8”
40
24
408.70
SD23012060
30”W x 6”H
25-1/2” 10-13/32” 5-3/8”
52
31
435.30
SD23612060
36”W x 6”H
31-1/2” 10-13/32” 5-3/8”
64
37
462.10
SD24212060
42”W x 6”H
37-1/2” 10-13/32” 5-3/8”
76
44
542.10
SD24812060
48”W x 6”H
43-1/2” 10-13/32” 5-3/8”
88
50
622.10
SD22412060L
24”W x 6”H
19-1/2” 10-13/32” 5-3/8”
40
28
448.80
SD23012060L
30”W x 6”H
25-1/2” 10-13/32” 5-3/8”
52
33
475.40
SD23612060L
36”W x 6”H
31-1/2” 10-13/32” 5-3/8”
64
39
502.10
SD24212060L
42”W x 6”H
37-1/2” 10-13/32” 5-3/8”
76
46
582.10
SD24812060L
48”W x 6”H
43-1/2” 10-13/32” 5-3/8”
88
52
662.10
SD2415060
24”W x 6”H
19-1/2” 13-13/32” 5-3/8”
20
14
217.00
SD3015060
30”W x 6”H
25-1/2” 13-13/32” 5-3/8”
26
17
230.50
SD3615060
36”W x 6”H
31-1/2” 13-13/32” 5-3/8”
32
20
270.50
SD4215060
42”W x 6”H
37-1/2” 13-13/32” 5-3/8”
38
23
310.50
SD4815060
48”W x 6”H
43-1/2” 13-13/32” 5-3/8”
44
27
350.50
SD2415060L
24”W x 6”H
19-1/2” 13-13/32” 5-3/8”
20
15
237.70
SD3015060L
30”W x 6”H
25-1/2” 13-13/32” 5-3/8”
26
18
251.10
SD3615060L
36”W x 6”H
31-1/2” 13-13/32” 5-3/8”
32
21
291.10
SD4215060L
42”W x 6”H
37-1/2” 13-13/32” 5-3/8”
38
24
331.10
SD4815060L
48”W x 6”H
43-1/2” 13-13/32” 5-3/8”
44
28
371.10
SD22415060
24”W x 6”H
19-1/2” 13-13/32” 5-3/8”
40
29
435.30
SD23015060
30”W x 6”H
25-1/2” 13-13/32” 5-3/8”
52
36
462.10
SD23615060
36”W x 6”H
31-1/2” 13-13/32” 5-3/8”
64
42
542.10
SD24215060
42”W x 6”H
37-1/2” 13-13/32” 5-3/8”
76
49
622.10
SD24815060
48”W x 6”H
43-1/2” 13-13/32” 5-3/8”
88
55
702.10
SD22415060L
24”W x 6”H
19-1/2” 13-13/32” 5-3/8”
40
31
475.40
SD23015060L
30”W x 6”H
25-1/2” 13-13/32” 5-3/8”
52
38
502.10
SD23615060L
36”W x 6”H
31-1/2” 13-13/32” 5-3/8”
64
44
582.10
SD24215060L
42”W x 6”H
37-1/2” 13-13/32” 5-3/8”
76
51
662.10
SD24815060L
48”W x 6”H
43-1/2” 13-13/32” 5-3/8”
88
57
742.20
TEL: 800-828-8018
www.datumfiling.com • sales@datumfiling.com
55
EFFECTIVE FEBRUARY 1, 2012
Prices and specifications subject to change without notice.
Pull Out Storage Drawers, Continued
Drawers include solid bottom. Can accommodate storage drawer kits for partitioning. Lock optional.
7-1/2" Storage Drawers
Usable
Item #
Non-Locking
Non-Locking
Locking
Double Entry
L
E
G
A
L
Non-Locking
Locking
Single Entry
Locking
Double Entry
L
E
T
T
E
R
Non-Locking
Locking
Single Entry
SD2412075
Dimensions
W
D
H
24”W x 7-1/2”H 19-1/2” 10-13/32” 6-7/8”
LFI Est Lbs.
20
12
List Price
209.80
SD3012075
30”W x 7-1/2”H 25-1/2” 10-13/32” 6-7/8”
26
155
223.10
SD3612075
36”W x 7-1/2”H 31-1/2” 10-13/32” 6-7/8”
32
18
236.50
SD4212075
42”W x 7-1/2”H 37-1/2” 10-13/32” 6-7/8”
38
21
276.50
SD4812075
48”W x 7-1/2”H 43-1/2” 10-13/32” 6-7/8”
44
24
316.60
SD2412075L
24”W x 7-1/2”H 19-1/2” 10-13/32” 6-7/8”
20
13
229.20
SD3012075L
30”W x 7-1/2”H 25-1/2” 10-13/32” 6-7/8”
26
16
242.60
SD3612075L
36”W x 7-1/2”H 31-1/2” 10-13/32” 6-7/8”
32
19
255.90
SD4212075L
42”W x 7-1/2”H 37-1/2” 10-13/32” 6-7/8”
38
22
295.90
SD4812075L
48”W x 7-1/2”H 43-1/2” 10-13/32” 6-7/8”
44
25
335.90
SD22412075
24”W x 7-1/2”H 19-1/2” 10-13/32” 6-7/8”
40
25
418.40
SD23012075
30”W x 7-1/2”H 25-1/2” 10-13/32” 6-7/8”
52
32
445.10
SD23612075
36”W x 7-1/2”H 31-1/2” 10-13/32” 6-7/8”
64
38
471.80
SD24212075
42”W x 7-1/2”H 37-1/2” 10-13/32” 6-7/8”
76
45
551.80
SD24812075
48”W x 7-1/2”H 43-1/2” 10-13/32” 6-7/8”
88
51
631.90
SD22412075L 24”W x 7-1/2”H 19-1/2” 10-13/32” 6-7/8”
40
29
458.40
SD23012075L 30”W x 7-1/2”H 25-1/2” 10-13/32” 6-7/8”
52
34
485.10
SD23612075L 36”W x 7-1/2”H 31-1/2” 10-13/32” 6-7/8”
64
40
511.80
SD24212075L 42”W x 7-1/2”H 37-1/2” 10-13/32” 6-7/8”
76
47
591.80
SD24812075L 48”W x 7-1/2”H 43-1/2” 10-13/32” 6-7/8”
88
53
671.90
SD2415075
24”W x 7-1/2”H 19-1/2” 13-13/32” 6-7/8”
20
15
223.10
SD3015075
30”W x 7-1/2”H 25-1/2” 13-13/32” 6-7/8”
26
18
236.50
SD3615075
36”W x 7-1/2”H 31-1/2” 13-13/32” 6-7/8”
32
21
276.50
SD4215075
42”W x 7-1/2”H 37-1/2” 13-13/32” 6-7/8”
38
24
316.60
SD4815075
48”W x 7-1/2”H 43-1/2” 13-13/32” 6-7/8”
44
28
356.60
SD2415075L
24”W x 7-1/2”H 19-1/2” 13-13/32” 6-7/8”
20
16
242.60
SD3015075L
30”W x 7-1/2”H 25-1/2” 13-13/32” 6-7/8”
26
19
255.90
SD3615075L
36”W x 7-1/2”H 31-1/2” 13-13/32” 6-7/8”
32
22
295.90
SD4215075L
42”W x 7-1/2”H 37-1/2” 13-13/32” 6-7/8”
38
25
335.90
SD4815075L
48”W x 7-1/2”H 43-1/2” 13-13/32” 6-7/8”
44
29
376.00
SD22415075
24”W x 7-1/2”H 19-1/2” 13-13/32” 6-7/8”
40
30
445.10
SD23015075
30”W x 7-1/2”H 25-1/2” 13-13/32” 6-7/8”
52
37
471.80
SD23615075
36”W x 7-1/2”H 31-1/2” 13-13/32” 6-7/8”
64
43
551.80
SD24215075
42”W x 7-1/2”H 37-1/2” 13-13/32” 6-7/8”
76
50
631.90
SD24815075
48”W x 7-1/2”H 43-1/2” 13-13/32” 6-7/8”
88
56
711.90
SD22415075L 24”W x 7-1/2”H 19-1/2” 13-13/32” 6-7/8”
40
32
485.10
SD23015075L 30”W x 7-1/2”H 25-1/2” 13-13/32” 6-7/8”
52
39
511.80
SD23615075L 36”W x 7-1/2”H 31-1/2” 13-13/32” 6-7/8”
64
45
591.80
SD24215075L 42”W x 7-1/2”H 37-1/2” 13-13/32” 6-7/8”
76
52
671.90
SD24815075L 48”W x 7-1/2”H 43-1/2” 13-13/32” 6-7/8”
88
58
738.60
TEL: 800-828-8018
www.datumfiling.com • sales@datumfiling.com
56
EFFECTIVE FEBRUARY 1, 2012
Prices and specifications subject to change without notice.
Pull Out Storage Drawers, Continued
Drawers include solid bottom. Can accommodate storage drawer kits for partitioning. Lock optional.
9" Storage Drawers
Usable
Non-Locking
Locking
Double Entry
L
E
T
T
E
R
Non-Locking
Locking
Single Entry
Item #
Non-Locking
Single Entry
Double Entry
Non-Locking
Locking
Locking
W
D
H
LFI Est Lbs. List Price
SD2412090
24”W x 9”H 19-1/2” 10-13/32” 8-3/8”
20
13
220.70
SD3012090
30”W x 9”H 25-1/2” 10-13/32” 8-3/8”
26
16
234.00
SD3612090
36”W x 9”H 31-1/2” 10-13/32” 8-3/8”
32
19
247.40
SD4212090
42”W x 9”H 37-1/2” 10-13/32” 8-3/8”
38
22
287.40
SD4812090
48”W x 9”H 43-1/2” 10-13/32” 8-3/8”
44
25
327.50
SD2412090L
24”W x 9”H 19-1/2” 10-13/32” 8-3/8”
20
14
240.10
SD3012090L
30”W x 9”H 25-1/2” 10-13/32” 8-3/8”
26
17
253.50
SD3612090L
36”W x 9”H 31-1/2” 10-13/32” 8-3/8”
32
20
306.80
SD4212090L
42”W x 9”H 37-1/2” 10-13/32” 8-3/8”
38
23
346.80
SD4812090L
48”W x 9”H 43-1/2” 10-13/32” 8-3/8”
44
26
422.00
SD22412090
24”W x 9”H 19-1/2” 10-13/32” 8-3/8”
40
26
440.30
SD23012090
30”W x 9”H 25-1/2” 10-13/32” 8-3/8”
52
33
466.90
SD23612090
36”W x 9”H 31-1/2” 10-13/32” 8-3/8”
64
39
493.60
SD24212090
42”W x 9”H 37-1/2” 10-13/32” 8-3/8”
76
46
573.60
SD24812090
48”W x 9”H 43-1/2” 10-13/32” 8-3/8”
88
52
653.60
SD22412090L 24”W x 9”H 19-1/2” 10-13/32” 8-3/8”
40
28
480.30
SD23012090L 30”W x 9”H 25-1/2” 10-13/32” 8-3/8”
52
35
506.90
SD23612090L 36”W x 9”H 31-1/2” 10-13/32” 8-3/8”
64
41
533.60
SD24212090L 42”W x 9”H 37-1/2” 10-13/32” 8-3/8”
76
48
613.60
SD24812090L 48”W x 9”H 43-1/2” 10-13/32” 8-3/8”
88
54
693.70
20
16
234.00
SD2415090
L
E
G
A
L
Dimensions
24”W x 9”H 19-1/2” 13-13/32” 8-3/8”
SD3015090
30”W x 9”H 25-1/2” 13-13/32” 8-3/8”
26
19
247.40
SD3615090
36”W x 9”H 31-1/2” 13-13/32” 8-3/8”
32
22
287.40
SD4215090
42”W x 9”H 37-1/2” 13-13/32” 8-3/8”
38
25
327.50
SD4815090
48”W x 9”H 43-1/2” 13-13/32” 8-3/8”
44
29
367.50
SD2415090L
24”W x 9”H 19-1/2” 13-13/32” 8-3/8”
20
17
253.50
SD3015090L
30”W x 9”H 25-1/2” 13-13/32” 8-3/8”
26
20
266.80
SD3615090L
36”W x 9”H 31-1/2” 13-13/32” 8-3/8”
32
23
306.80
SD4215090L
42”W x 9”H 37-1/2” 13-13/32” 8-3/8”
38
26
346.80
SD4815090L
48”W x 9”H 43-1/2” 13-13/32” 8-3/8”
44
30
386.80
SD22415090
24”W x 9”H 19-1/2” 13-13/32” 8-3/8”
40
31
466.90
SD23015090
30”W x 9”H 25-1/2” 13-13/32” 8-3/8”
52
38
493.60
SD23615090
36”W x 9”H 31-1/2” 13-13/32” 8-3/8”
64
44
573.60
SD24215090
42”W x 9”H 37-1/2” 13-13/32” 8-3/8”
76
51
653.60
SD24815090
48”W x 9”H 43-1/2” 13-13/32” 8-3/8”
88
57
733.70
SD22415090L 24”W x 9”H 19-1/2” 13-13/32” 8-3/8”
40
33
506.90
SD23015090L 30”W x 9”H 25-1/2” 13-13/32” 8-3/8”
52
40
533.60
SD23615090L 36”W x 9”H 31-1/2” 13-13/32” 8-3/8”
64
46
613.60
SD24215090L 42”W x 9”H 37-1/2” 13-13/32” 8-3/8”
76
53
693.70
SD24815090L 48”W x 9”H 43-1/2” 13-13/32” 8-3/8”
88
59
773.70
TEL: 800-828-8018
www.datumfiling.com • sales@datumfiling.com
57
EFFECTIVE FEBRUARY 1, 2012
Prices and specifications subject to change without notice.
Pull Out Storage Drawers, Continued
Drawers include solid bottom. Can accommodate storage drawer kits for partitioning. Lock optional.
10-1/2" Storage Drawers
Usable
Non-Locking
Locking
Double Entry
L
E
T
T
E
R
Non-Locking
Locking
Single Entry
Item #
Non-Locking
Locking
Non-Locking
Locking
Single Entry
Double Entry
W
D
H
LFI
Est Lbs.
List Price
SD2412105
24”W x 10-1/2’”H 19-1/2” 10-13/32” 9-3/8”
20
14
226.80
SD3012105
30”W x 10-1/2’”H 25-1/2” 10-13/32” 9-3/8”
26
17
240.10
SD3612105
36”W x 10-1/2’”H 31-1/2” 10-13/32” 9-3/8”
32
20
253.50
SD4212105
42”W x10-1/2’”H 37-1/2” 10-13/32” 9-3/8”
38
23
293.50
SD4812105
48”W x 10-1/2’”H 43-1/2” 10-13/32” 9-3/8”
44
26
333.50
SD2412105L 24”W x 10-1/2’”H 19-1/2” 10-13/32” 9-3/8”
20
15
247.40
SD3012105L 30”W x 10-1/2’”H 25-1/2” 10-13/32” 9-3/8”
26
18
260.70
SD3612105L 36”W x 10-1/2’”H 31-1/2” 10-13/32” 9-3/8”
32
21
274.10
SD4212105L
42”W x10-1/2’”H 37-1/2” 10-13/32” 9-3/8”
38
24
314.10
SD4812105L 48”W x 10-1/2’”H 43-1/2” 10-13/32” 9-3/8”
44
27
354.20
SD22412105 24”W x 10-1/2’”H 19-1/2” 10-13/32” 9-3/8”
40
27
453.60
SD23012105 30”W x 10-1/2’”H 25-1/2” 10-13/32” 9-3/8”
52
34
480.30
SD23612105 36”W x 10-1/2’”H 31-1/2” 10-13/32” 9-3/8”
64
40
506.90
SD24212105
42”W x10-1/2’”H 37-1/2” 10-13/32” 9-3/8”
76
47
587.00
SD24812105 48”W x 10-1/2’”H 43-1/2” 10-13/32” 9-3/8”
88
53
667.10
SD22412105L 24”W x 10-1/2’”H 19-1/2” 10-13/32” 9-3/8”
40
29
493.60
SD23012105L 30”W x 10-1/2’”H 25-1/2” 10-13/32” 9-3/8”
52
36
520.30
SD23612105L 36”W x 10-1/2’”H 31-1/2” 10-13/32” 9-3/8”
64
42
546.90
SD24212105L 42”W x10-1/2’”H 37-1/2” 10-13/32” 9-3/8”
76
49
627.00
SD24812105L 48”W x 10-1/2’”H 43-1/2” 10-13/32” 9-3/8”
88
55
707.10
24”W x 10-1/2’”H 19-1/2” 13-13/32” 9-3/8”
20
17
240.10
SD3015105
30”W x 10-1/2’”H 25-1/2” 13-13/32” 9-3/8”
26
20
253.50
SD3615105
36”W x 10-1/2’”H 31-1/2” 13-13/32” 9-3/8”
32
23
293.50
SD2415105
L
E
G
A
L
Dimensions
SD4215105
42”W x10-1/2’”H 37-1/2” 13-13/32” 9-3/8”
38
26
333.50
SD4815105
48”W x 10-1/2’”H 43-1/2” 13-13/32” 9-3/8”
44
30
373.50
SD2415105L 24”W x 10-1/2’”H 19-1/2” 13-13/32” 9-3/8”
20
18
260.70
SD3015105L 30”W x 10-1/2’”H 25-1/2” 13-13/32” 9-3/8”
26
21
274.10
SD3615105L 36”W x 10-1/2’”H 31-1/2” 13-13/32” 9-3/8”
32
24
314.10
SD4215105L
42”W x10-1/2’”H 37-1/2” 13-13/32” 9-3/8”
38
27
354.20
SD4815105L 48”W x 10-1/2’”H 43-1/2” 13-13/32” 9-3/8”
44
31
394.20
SD22415105 24”W x 10-1/2’”H 19-1/2” 13-13/32” 9-3/8”
40
32
493.60
SD23015105 30”W x 10-1/2’”H 25-1/2” 13-13/32” 9-3/8”
52
39
506.90
SD23615105 36”W x 10-1/2’”H 31-1/2” 13-13/32” 9-3/8”
64
45
587.00
SD24215105
76
52
667.10
42”W x10-1/2’”H 37-1/2” 13-13/32” 9-3/8”
SD24815105 48”W x 10-1/2’”H 43-1/2” 13-13/32” 9-3/8”
88
58
747.10
SD22415105L 24”W x 10-1/2’”H 19-1/2” 13-13/32” 9-3/8”
40
34
533.60
SD23015105L 30”W x 10-1/2’”H 25-1/2” 13-13/32” 9-3/8”
52
41
546.90
SD23615105L 36”W x 10-1/2’”H 31-1/2” 13-13/32” 9-3/8”
64
47
627.00
SD24215105L 42”W x10-1/2’”H 37-1/2” 13-13/32” 9-3/8”
76
54
707.10
SD24815105L 48”W x 10-1/2’”H 43-1/2” 13-13/32” 9-3/8”
88
60
787.10
*All 10-1/2" drawers include hanging file folder rails kits.
TEL: 800-828-8018
www.datumfiling.com • sales@datumfiling.com
58
EFFECTIVE FEBRUARY 1, 2012
Prices and specifications subject to change without notice.
Pull Out Storage Drawers, Continued
Drawers include solid bottom. Can accommodate storage drawer kits for partitioning. Lock optional.
12" Storage Drawers
Usable
Non-Locking
Locking
Double Entry
L
E
T
T
E
R
Non-Locking
Locking
Single Entry
Item #
Dimensions
W
Non-Locking
Locking
Non-Locking
Locking
Single Entry
LFI Est Lbs.
List Price
SD2412120
24”W x 12’”H 19-1/2”
10-13/32”
11-3/8”
20
14
253.50
30”W x 12’”H 25-1/2”
10-13/32”
11-3/8”
26
17
266.80
SD3612120
36”W x 12’”H 31-1/2”
10-13/32”
11-3/8”
32
20
280.10
SD4212120
42”W x12’”H
37-1/2”
10-13/32”
11-3/8”
38
23
320.10
SD4812120
48”W x 12’”H 43-1/2”
10-13/32”
11-3/8”
44
26
360.20
SD2412120L
24”W x 12’”H 19-1/2”
10-13/32”
11-3/8”
20
14
274.10
SD3012120L
30”W x 12’”H 25-1/2”
10-13/32”
11-3/8”
26
18
287.40
SD3612120L
36”W x 12’”H 31-1/2”
10-13/32”
11-3/8”
32
21
300.70
SD4212120L
42”W x12’”H
37-1/2”
10-13/32”
11-3/8”
38
24
340.80
SD4812120L
48”W x 12’”H 43-1/2”
10-13/32”
11-3/8”
44
27
380.80
SD22412120
24”W x 12’”H 19-1/2”
10-13/32”
11-3/8”
40
27
506.90
SD23012120
30”W x 12’”H 25-1/2”
10-13/32”
11-3/8”
52
34
533.60
SD23612120
36”W x 12’”H 31-1/2”
10-13/32”
11-3/8”
64
40
560.30
SD24212120
42”W x12’”H
37-1/2”
10-13/32”
11-3/8”
76
47
640.30
SD24812120
48”W x 12’”H 43-1/2”
10-13/32”
11-3/8”
88
53
720.40
SD22412120L 24”W x 12’”H 19-1/2”
10-13/32”
11-3/8”
40
29
546.90
SD23012120L 30”W x 12’”H 25-1/2”
10-13/32”
11-3/8”
52
36
573.60
SD23612120L 36”W x 12’”H 31-1/2”
10-13/32”
11-3/8”
64
42
600.30
SD24212120L
10-13/32”
11-3/8”
76
49
680.40
SD2415120
Double Entry
H
SD3012120
42”W x12’”H
37-1/2”
SD24812120L 48”W x 12’”H 43-1/2”
L
E
G
A
L
D
24”W x 12’”H 19-1/2”
10-13/32”
11-3/8”
88
55
760.40
13-13/32”
11-3/8”
20
17
266.80
SD3015120
30”W x 12’”H 25-1/2”
13-13/32”
11-3/8”
26
20
280.10
SD3615120
36”W x 12’”H 31-1/2”
13-13/32”
11-3/8”
32
23
320.10
SD4215120
42”W x12’”H
37-1/2”
13-13/32”
11-3/8”
38
26
360.20
SD4815120
48”W x 12’”H 43-1/2”
13-13/32”
11-3/8”
44
30
400.30
SD2415120L
24”W x 12’”H 19-1/2”
13-13/32”
11-3/8”
20
18
287.40
SD3015120L
30”W x 12’”H 25-1/2”
13-13/32”
11-3/8”
26
21
300.70
SD3615120L
36”W x 12’”H 31-1/2”
13-13/32”
11-3/8”
32
24
340.80
SD4215120L
42”W x12’”H
13-13/32”
11-3/8”
38
27
380.80
37-1/2”
SD4815120L
48”W x 12’”H 43-1/2”
13-13/32”
11-3/8”
44
31
420.80
SD22415120
24”W x 12’”H 19-1/2”
13-13/32”
11-3/8”
40
32
533.60
SD23015120
30”W x 12’”H 25-1/2”
13-13/32”
11-3/8”
52
39
560.30
SD23615120
36”W x 12’”H 31-1/2”
13-13/32”
11-3/8”
64
45
640.30
SD24215120
42”W x12’”H
37-1/2”
13-13/32”
11-3/8”
76
52
720.40
SD24815120
48”W x 12’”H 43-1/2”
13-13/32”
11-3/8”
88
58
800.40
SD22415120L 24”W x 12’”H 19-1/2”
13-13/32”
11-3/8”
40
34
573.60
SD23015120L 30”W x 12’”H 25-1/2”
13-13/32”
11-3/8”
52
41
600.30
SD23615120L 36”W x 12’”H 31-1/2”
13-13/32”
11-3/8”
64
47
680.40
SD24215120L
37-1/2”
13-13/32”
11-3/8”
76
54
760.40
SD24815120L 48”W x 12’”H 43-1/2”
13-13/32”
11-3/8”
88
60
840.40
42”W x12’”H
*All 12" drawers include hanging file folder rails kits.
TEL: 800-828-8018
www.datumfiling.com • sales@datumfiling.com
59
EFFECTIVE FEBRUARY 1, 2012
Prices and specifications subject to change without notice.
Pull Out Storage Drawer Kits
Storage Drawer Kits
L
E
T
T
E
R
L
E
G
A
L
Item #
Dimensions
Est Lbs.
List Price
SDSK031224
3”H x 24”W
3
46.10
SDSK031230
3”H x 30”W
3
50.90
SDSK031236
3”H x 36”W
4
54.60
SDSK041224
4-1/2”H x 24”W
4
48.50
SDSK041230
4-1/2”H x 30”W
5
53.30
SDSK041236
4-1/2”H x 36”W
5
58.20
SDSK061224
6”H x 24”W
7
50.90
SDSK061230
6”H x 30”W
8
55.80
SDSK061236
6”H x 36”W
9
61.80
SDSK061242
6”H x 42”W
10
66.70
SDSK061248
6”H x 48”W
11
71.50
SDSK071224
7-1/2”H x 24”W
8
54.60
SDSK071230
7-1/2”H x 30”W
9
60.70
SDSK071236
7-1/2”H x 36”W
10
65.50
SDSK071242
7-1/2”H x 42”W
11
71.50
SDSK071248
7-1/2”H x 48”W
12
76.40
SDSK091224
9”H x 24”W
9
59.40
SDSK091230
9”H x 30”W
11
65.50
SDSK091236
9”H x 36”W
12
71.50
SDSK091242
9”H x 42”W
13
77.60
SDSK091248
9”H x 48”W
15
83.70
SDSK101224
10-1/2”H x 24”W
11
64.30
SDSK101230
10-1/2”H x 30”W
13
70.40
SDSK101236
10-1/2”H x 36”W
14
77.60
SDSK101242
10-1/2”H x 42”W
16
83.70
SDSK101248
10-1/2”H x 48”W
17
89.80
SDSK121224
12”H x 24”W
12
69.10
SDSK121230
12”H x 30”W
14
76.40
SDSK121236
12”H x 36”W
16
83.70
SDSK121242
12”H x 42”W
18
90.90
SDSK121248
12”H x 48”W
20
95.20
SDSK031524
3”H x 24”W
3
52.20
SDSK031530
3”H x 30”W
4
55.80
SDSK031536
3”H x 36”W
4
60.70
SDSK041524
4-1/2”H x 24”W
4
54.60
SDSK041530
4-1/2”H x 30”W
5
59.40
SDSK041536
4-1/2”H x 36”W
6
64.30
SDSK061524
6”H x 24”W
7
58.20
SDSK061530
6”H x 30”W
8
63.10
SDSK061536
6”H x 36”W
9
67.90
SDSK061542
6”H x 42”W
11
72.80
SDSK061548
6”H x 48”W
12
77.60
DRAWER KITS ONLY. DOES NOT INCLUDE DRAWERS. DRAWER
KITS AND PARTITIONS MUST BE PURCHASED SEPARATELY.
* Adjustable on 1" centers.
Continued on next page.
TEL: 800-828-8018
www.datumfiling.com • sales@datumfiling.com
60
EFFECTIVE FEBRUARY 1, 2012
Prices and specifications subject to change without notice.
Pull Out Storage Drawer Kits, Cont.
Storage Drawer Kits (continued)
L
E
G
A
L
Item #
Dimensions
Est Lbs.
List Price
SDSK071524
SDSK071530
7-1/2”H x 24”W
8
60.70
7-1/2”H x 30”W
10
66.70
SDSK071536
7-1/2”H x 36”W
11
71.50
SDSK071542
7-1/2”H x 42”W
12
77.60
SDSK071548
7-1/2”H x 48”W
13
82.40
SDSK091524
9”H x 24”W
10
64.30
SDSK091530
9”H x 30”W
12
70.40
SDSK091536
9”H x 36”W
13
76.40
SDSK091542
9”H x 42”W
15
82.40
SDSK091548
9”H x 48”W
16
88.50
SDSK101524
10-1/2”H x 24”W
12
67.90
SDSK101530
10-1/2”H x 30”W
14
74.00
SDSK101536
10-1/2”H x 36”W
16
81.30
SDSK101542
10-1/2”H x 42”W
17
87.40
SDSK101548
10-1/2”H x 48”W
19
93.30
SDSK121524
12”H x 24”W
14
71.50
SDSK121530
12”H x 30”W
16
78.90
SDSK121536
12”H x 36”W
18
86.10
SDSK121542
12”H x 42”W
20
93.30
SDSK121548
12”H x 48”W
22
100.70
DRAWER KITS ONLY. DOES NOT INCLUDE DRAWERS. DRAWER
KITS AND PARTITIONS MUST BE PURCHASED SEPARATELY.
* Adjustable on 1" centers.
Slotted Partitions
L
E
T
T
E
R
L
E
G
A
L
Item #
Dimensions
Est Lbs.
List Price
SDSP0312
3”H
1
29.10
SDSP0412
4-1/2”H
2
30.30
SDSP0612
6”H
3
31.50
SDSP0712
7-1/2”H
3
32.80
SDSP0912
9”H
4
35.20
SDSP1012
10-1/2”H
4
37.60
SDSP1212
12”H
5
41.30
SDSP0315
3”H
1
35.20
SDSP0415
4-1/2”H
2
36.40
SDSP0615
6”H
2
37.60
SDSP0715
7-1/2”H
3
38.90
SDSP0915
9”H
4
40.00
SDSP1015
10-1/2”H
4
41.30
SDSP1215
12”H
5
42.40
TEL: 800-828-8018
www.datumfiling.com • sales@datumfiling.com
* Slotted partitions run front to back only.
* Adjustable on 1" centers.
61
EFFECTIVE FEBRUARY 1, 2012
Prices and specifications subject to change without notice.
Pull Out Storage Drawer Partitions
Flat Partitions
Item #
Opening Dimensions
Est Lbs.
List Price
SDFP0303
3”H x 3”W
0.1
3.70
SDFP0304
3”H x 4”W
0.1
4.80
SDFP0305
3”H x 5”W
0.1
4.80
SDFP0306
3”H x 6”W
0.1
4.80
SDFP0307
3”H x 7”W
0.1
4.80
SDFP0308
3”H x 8”W
0.1
6.10
SDFP0309
3”H x 9”W
0.2
6.10
SDFP0310
3”H x 10”W
0.2
7.20
SDFP0311
3”H x 11”W
0.2
7.20
SDFP0312
3”H x 12”W
0.2
7.20
SDFP0313
3”H x 13”W
0.2
8.50
SDFP0403
4-1/2”H x 3”W
0.1
3.70
SDFP0404
4-1/2”H x 4”W
0.2
4.80
SDFP0405
4-1/2”H x 5”W
0.2
6.10
SDFP0406
4-1/2”H x 6”W
0.2
6.10
SDFP0407
4-1/2”H x 7”W
0.3
7.20
SDFP0408
4-1/2”H x 8”W
0.3
7.20
SDFP0409
4-1/2”H x 9”W
0.3
8.50
SDFP0410
4-1/2”H x 10”W
0.3
9.70
SDFP0411
4-1/2”H x 11”W
0.3
9.70
SDFP0412
4-1/2”H x 12”W
0.3
10.90
SDFP0413
4-1/2”H x 13”W
0.4
10.90
SDFP0603
6”H x 3”W
0.2
4.80
SDFP0604
6”H x 4”W
0.3
4.80
SDFP0605
6”H x 5”W
0.3
6.10
SDFP0606
6”H x 6”W
0.4
7.20
SDFP0607
6”H x 7”W
0.4
7.20
SDFP0608
6”H x 8”W
0.5
8.50
SDFP0609
6”H x 9”W
0.5
9.70
SDFP0610
6”H x 10”W
0.5
9.70
SDFP0611
6”H x 11”W
0.5
10.90
SDFP0612
6”H x 12”W
0.6
12.20
SDFP0613
6”H x 13”W
0.6
12.20
SDFP0703
7-1/2”H x 3”W
0.3
4.80
SDFP0704
7-1/2”H x 4”W
0.4
6.10
SDFP0705
7-1/2”H x 5”W
0.4
7.20
SDFP0706
7-1/2”H x 6”W
0.5
8.50
SDFP0707
7-1/2”H x 7”W
0.5
8.50
SDFP0708
7-1/2”H x 8”W
0.5
9.70
SDFP0709
7-1/2”H x 9”W
0.6
10.90
SDFP0710
7-1/2”H x 10”W
0.7
12.20
SDFP0711
7-1/2”H x 11”W
0.7
13.30
SDFP0712
7-1/2”H x 12”W
0.8
13.30
SDFP0713
7-1/2”H x 13”W
0.8
14.60
DRAWER PARTITIONS ONLY. DOES NOT INCLUDE DRAWERS.
DRAWER KITS AND PARTITIONS MUST BE PURCHASED SEPARATELY.
Continued on next page.
* Flat partitions run left to right only.
TEL: 800-828-8018
www.datumfiling.com • sales@datumfiling.com
62
EFFECTIVE FEBRUARY 1, 2012
Prices and specifications subject to change without notice.
Pull Out Storage Drawer Partitions, Cont.
Flat Partitions (continued)
Item #
Opening Dimensions
Est Lbs.
List Price
SDFP0903
9”H x 3”W
0.3
4.80
SDFP0904
9”H x 4”W
0.4
6.10
SDFP0905
9”H x 5”W
0.5
7.20
SDFP0906
9”H x 6”W
0.6
8.50
SDFP0907
9”H x 7”W
0.6
9.70
SDFP0908
9”H x 8”W
0.7
10.90
SDFP0909
9”H x 9”W
0.7
10.90
SDFP0910
9”H x 10”W
0.9
12.20
SDFP0911
9”H x 11”W
0.9
13.30
SDFP0912
9”H x 12”W
0.9
14.60
SDFP0913
9”H x 13”W
1.0
15.80
SDFP1003
10-1/2”H x 3”W
0.4
6.10
SDFP1004
10-1/2”H x 4”W
0.4
7.20
SDFP1005
10-1/2”H x 5”W
0.5
8.50
SDFP1006
10-1/2”H x 6”W
0.6
9.70
SDFP1007
10-1/2”H x 7”W
0.7
10.90
SDFP1008
10-1/2”H x 8”W
0.7
12.20
SDFP1009
10-1/2”H x 9”W
0.9
13.30
SDFP1010
10-1/2”H x 10”W
0.9
14.60
SDFP1011
10-1/2”H x 11”W
1.1
15.80
SDFP1012
10-1/2”H x 12”W
1.1
17.00
SDFP1013
10-1/2”H x 13”W
1.2
18.20
SDFP1203
12”H x 3”W
0.5
6.10
SDFP1204
12”H x 4”W
0.6
7.20
SDFP1205
12”H x 5”W
0.6
8.50
SDFP1206
12”H x 6”W
0.7
10.90
SDFP1207
12”H x 7”W
0.8
12.20
SDFP1208
12”H x 8”W
0.9
13.30
SDFP1209
12”H x 9”W
1.0
14.60
SDFP1210
12”H x 10”W
1.1
15.80
SDFP1211
12”H x 11”W
1.2
17.00
SDFP1212
12”H x 12”W
1.3
19.40
SDFP1213
12”H x 13”W
1.4
20.60
DRAWER KITS ONLY. DOES NOT INCLUDE DRAWERS. DRAWER
KITS AND PARTITIONS MUST BE PURCHASED SEPARATELY.
* Flat partitions run left to right only.
TEL: 800-828-8018
www.datumfiling.com • sales@datumfiling.com
63
EFFECTIVE FEBRUARY 1, 2012
Prices and specifications subject to change without notice.
Personal Storage Lockers
Item #
Description
D
W
H
Est. Lbs.
List Price
PLOC1
Starter
24”
18”
76”
190
1395.00
PLOC1-A
Adder
24”
18”
76”
175
1250.00
*Units include garment rod, louvered drawer, louvered hinged door with padlock cam,
accessory hook and two shelves.
TEL: 800-828-8018
www.datumfiling.com • sales@datumfiling.com
64
EFFECTIVE FEBRUARY 1, 2012
Prices and specifications subject to change without notice.
Component Parts - TrakSlider Top Shelf Support
Item #
W
Est Lbs.
List Price
B4F-S
24”
5
29.20
B4F-A
24”
9
61.60
T4F-S
24”
5
29.20
T4F-A
24”
18
126.40
Q4F-S
24”
5
29.20
Q4F-A
24”
27
191.30
B0F-S
30”
6
30.80
B0F-A
30”
11
63.20
T0F-S
30”
6
30.80
T0F-A
30”
22
128.10
Q0F-S
30”
6
30.80
Q0F-A
30”
33
193.00
B6F-S
36”
7
32.40
B6F-A
36”
13
64.90
T6F-S
36”
7
32.40
T6F-A
36”
26
129.70
Q6F-S
36”
7
32.40
Q6F-A
36”
39
194.50
B2F-S
42”
8
34.00
B2F-A
42”
15
66.50
T2F-S
42”
8
34.00
T2F-A
42”
30
131.30
Q2F-S
42”
8
34.00
Q2F-A
42”
5
130.00
B8F-S
48”
9
35.80
B8F-A
48”
17
68.10
T8F-S
48”
9
35.80
T8F-A
48”
34
133.00
Q8F-S
48”
9
35.80
Q8F-A
48”
51
197.80
The Datum TrakSlider Top Shelf is to be used in conjunction with Datum
TrakSlider Systems. TrakSlider Top Shelf Supports ensure that the overhead
anti-tip mechanism is properly attached and are strongly recommended.
Please refer to the information below when ordering a Datum 4Post TrakSlider
System as component parts or when converting stationary 4Post to a
TrakSlider System.
Starter
Adder
BiSlider
Deduct one shelf support*
Deduct two shelf supports*
TriSlider
Deduct one shelf support*
Deduct four shelf supports*
QuadSlider
Deduct one shelf support*
Deduct six shelf supports*
*Shelf supports are available in Standard, Medium, and Heavy Duty. Please
deduct corresponding shelf supports. For example, if Standard Duty Shelving is
being used, deduct Standard Duty Shelf Supports.
TEL: 800-828-8018
www.datumfiling.com • sales@datumfiling.com
65
EFFECTIVE FEBRUARY 1, 2012
Prices and specifications subject to change without notice.
36" Wide Complete BiSlider Systems
all complete systems do not include dividers. please refer to page 44 for divider information
Includes 7 or 8 level 4Post™ Shelving for Letter or Legal Depth. X-Ray Shelving includes 5 level 4Post™ Shelving.
BiSlider Systems
Item #
Media
Overall Depth
W
H
LFI
Est Lbs.
List Price
B621LT-4P7
Letter
26-1/2”
76”
81-3/4”
714
406
2,317.60
B621LT-4P8
Letter
26-1/2”
76”
93-3/4”
816
468
2,478.80
B621LG-4P7
Legal
32-1/2”
76”
81-3/4”
714
450
2,563.80
B621LG-4P8
Legal
32-1/2”
76”
93-3/4”
816
198
2,745.60
B621XR-4P5
X-Ray
38-1/2”
76”
93-3/4”
612
548
2,990.60
B632LT-4P7
Letter
26-1/2”
112”
81-3/4”
1,190
700
3,836.00
B632LT-4P8
Letter
26-1/2”
112”
93-3/4”
1,360
769
4,100.40
B632LG-4P7
Legal
32-1/2”
112”
81-3/4”
1,190
738
4,231.30
B632LG-4P8
Legal
32-1/2”
112”
93-3/4”
1,360
817
4,532.00
B632XR-495
X-Ray
38-1/2”
112”
93-3/4”
850
903
4,944.30
B643LT-4P7
Letter
26-1/2”
148”
81-3/4”
1,666
974
5,354.30
B643LT-4P8
Letter
26-1/2”
148”
93-3/4”
1,904
1,070
5,724.20
B643LG-4P7
Legal
32-1/2”
148”
81-3/4”
1,666
1,026
5,898.80
B643LG-4P8
Legal
32-1/2”
148”
93-3/4”
1,904
1,136
6,318.50
B643XR-4P5
X-Ray
38-1/2”
148”
93-3/4”
1,190
1,258
6,896.90
B654LT-4P7
Letter
26-1/2”
184”
81-3/4”
2,142
1,248
6,873.80
B654LT-4P8
Letter
26-1/2”
184”
93-3/4”
2,448
1,371
7,346.90
B654LG-4P7
Legal
32-1/2”
184”
81-3/4”
2,142
1,314
7,567.60
B654LG-4P8
Legal
32-1/2”
184”
93-3/4”
2,448
1,455
8,102.40
B654XR-4P5
X-Ray
38-1/2”
184”
93-3/4”
1,530
1,613
8,851.80
B665LT-4P7
Letter
26-1/2”
224”
81-3/4”
2,618
1,522
8,393.50
B665LT-4P8
Letter
26-1/2”
224”
93-3/4”
2,992
1,572
8,969.50
B665LG-4P7
Legal
32-1/2”
224”
81-3/4”
2,618
1,602
9,235.10
B665LG-4P8
Legal
32-1/2”
224”
93-3/4”
2,992
1,774
9,888.80
B665XR-4P5
X-Ray
38-1/2”
224”
93-3/4”
1,870
1,968
10,804.40
B676LT-4P7
Letter
26-1/2”
260”
81-3/4”
3,094
1,796
9,911.80
B676LT-4P8
Letter
26-1/2”
260”
93-3/4”
3,536
1,973
10,593.30
B676LG-4P7
Legal
32-1/2”
260”
81-3/4”
3,094
1,890
10,903.80
B676LG-4P8
Legal
32-1/2”
260”
93-3/4”
3,536
2,093
11,673.90
B676XR-4P5
X-Ray
38-1/2”
260”
93-3/4”
2,210
2,323
12,756.90
*All widths include necessary overtravel on each side of the ­system. Please NOTE systems up to a 4/3 configuration do not require overtravel, deduct 4" off width of system.
Single rivet shelf supports replace front Kick Plate and ­standard support on bottom shelf allowing for easy attachment to mobile carriages. Holes are prepunched into single
rivet support to match up with corresponding holes on TrakSlider carriages. All complete systems include TrakSlider Top Shelf Supports.
TEL: 800-828-8018
www.datumfiling.com • sales@datumfiling.com
66
EFFECTIVE FEBRUARY 1, 2012
Prices and specifications subject to change without notice.
36" Wide Complete TriSlider Systems
all complete systems do not include dividers. please refer to page 44 for divider information
Includes 7 or 8 level 4Post™ Shelving for Letter or Legal Depth. X-Ray Shelving includes 5 level 4Post™ Shelving.
TriSlider Systems
Item #
Media
Overall Depth
W
H
LFI
Est Lbs.
List Price
T621LT-4P7
Letter
41"
76"
82-3/4"
952
646
3,588.50
T621LT-4P8
Letter
41"
76"
94-3/4"
1,088
703
3,806.80
T621LG-4P7
Legal
49-1/2"
76"
82-3/4"
952
703
3,924.50
T621LG-4P8
Legal
49-1/2"
76"
94-3/4"
1,088
768
4,171.90
T621XR-4P5
X-Ray
58-1/2"
76"
94-3/4"
680
838
4,532.00
T632LT-4P7
Letter
41"
112"
82-3/4"
1,666
1,109
6,197.20
T632LT-4P8
Letter
41"
112"
94-3/4"
1,904
1,208
6,576.80
T632LG-4P7
Legal
49-1/2"
112"
82-3/4"
1,666
1,207
6,775.70
T632LG-4P8
Legal
49-1/2"
112"
94-3/4"
1,904
1,320
7,205.00
T632XR-4P5
X-Ray
58-1/2"
112"
94-3/4"
840
1,441
7,829.50
T643LT-4P7
Letter
41"
148"
82-3/4"
2,380
1,572
8,804.60
T643LT-4P8
Letter
41"
148"
94-3/4"
2,720
1,713
9,345.40
T643LG-4P7
Legal
49-1/2"
148"
82-3/4"
2,380
1,711
9,626.80
T643LG-4P8
Legal
49-1/2"
148"
94-3/4"
2,720
1,872
10,239.30
T643XR-4P5
X-Ray
58-1/2"
148"
94-3/4"
1,700
2,044
11,128.20
T654LT-4P7
Letter
41"
184"
82-3/4"
3,094
2,035
11,413.20
T654LT-4P8
Letter
41"
184"
94-3/4"
3,536
2,218
12,114.20
T654LG-4P7
Legal
49-1/2"
184"
82-3/4"
3,094
2,215
12,476.70
T654LG-4P8
Legal
49-1/2"
184"
94-3/4"
3,536
2,424
13,271.20
T654XR-4P5
X-Ray
58-1/2"
184"
94-3/4"
2,210
2,647
14,425.60
T665LT-4P7
Letter
41"
224"
82-3/4"
3,808
2,498
14,020.70
T665LT-4P8
Letter
41"
224"
94-3/4"
4,352
2,723
14,884.10
T665LG-4P7
Legal
49-1/2"
224"
82-3/4"
3,808
2,719
15,327.90
T665LG-4P8
Legal
49-1/2"
224"
94-3/4"
4,352
2,976
16,304.20
T665XR-4P5
X-Ray
58-1/2"
224"
94-3/4"
2,720
3,250
17,724.30
T676LT-4P7
Letter
41"
260"
82-3/4"
4,522
2,961
16,629.30
T676LT-4P8
Letter
41"
260"
94-3/4"
5,168
3,228
17,652.80
T676LG-4P7
Legal
49-1/2"
260"
82-3/4"
4,522
3,223
18,179.20
T676LG-4P8
Legal
49-1/2"
260"
94-3/4"
5,168
3,528
19,337.30
T676XR-4P5
X-Ray
58-1/2"
260"
94-3/4"
3,230
3,853
21,023.00
*All widths include necessary overtravel on each side of the ­system. Please NOTE systems up to a 4/3 configuration do not require overtravel, deduct 4" off width of system.
Single rivet shelf supports replace front Kick Plate and ­standard support on bottom shelf allowing for easy attachment to mobile carriages. Holes are prepunched into single
rivet support to match up with corresponding holes on TrakSlider carriages. All complete systems include TrakSlider Top Shelf Supports.
TEL: 800-828-8018
www.datumfiling.com • sales@datumfiling.com
67
EFFECTIVE FEBRUARY 1, 2012
Prices and specifications subject to change without notice.
42" Wide Complete BiSlider Systems
all complete systems do not include dividers. please refer to page 44 for divider information
Includes 7 or 8 level 4Post™ Shelving for Letter or Legal Depth. X-Ray Shelving includes 5 level 4Post™ Shelving.
BiSlider Systems
Item #
Media
Overall Depth
W
H
LFI
Est Lbs.
List Price
B221LT-4P7
Letter
26-1/2"
88"
81-3/4"
840
535
2,648.60
B221-LT-4P8
Letter
26-1/2"
88"
93-3/4"
960
589
2,837.80
B221LG-4P7
Legal
32-1/2"
88"
81-3/4"
840
583
2,893.60
B221LG-4P8
Legal
32-1/2"
88"
93-3/4"
960
625
3,105.90
B221XR-4P5
X-Ray
38-1/2"
88"
93-3/4"
600
665
3,273.20
B232LT-4P7
Letter
26-1/2"
130"
81-3/4"
1400
881
4,382.90
B232LT-4P8
Letter
26-1/2"
130"
93-3/4"
1600
970
4,697.00
B232LG-4P7
Legal
32-1/2"
130"
81-3/4"
1400
920
4,778.20
B232LG-4P8
Legal
32-1/2"
130"
93-3/4"
1600
1,021
5,126.30
B232XR-4P5
X-Ray
38-1/2"
130"
93-3/4"
1000
1,096
5,404.00
B243LT-4P7
Letter
26-1/2"
172"
81-3/4"
1960
1,227
6,118.40
B243LT-4P8
Letter
26-1/2"
172"
93-3/4"
2240
1,351
6,554.90
B243LG-4P7
Legal
32-1/2"
172"
81-3/4"
1960
1,334
6,661.60
B243LG-4P8
Legal
32-1/2"
172"
93-3/4"
2240
1,418
7,148.00
B243XR-4P5
X-Ray
38-1/2"
172"
93-3/4"
1400
1,205
7,534.80
B254LT-4P7
Letter
26-1/2"
214"
81-3/4"
2520
1,573
7,853.80
B254LT-4P8
Letter
26-1/2"
214"
93-3/4"
2880
1,732
8,414.10
B254LG-4P7
Legal
32-1/2"
214"
81-3/4"
2520
1,709
8,547.40
B254LG-4P8
Legal
32-1/2"
214"
93-3/4"
2880
1,814
9,168.40
B254XR-4P5
X-Ray
38-1/2"
214"
93-3/4"
1800
1,958
9,663.20
B265LT-4P7
Letter
26-1/2"
260"
81-3/4"
3080
1,919
9,589.20
B265LT-4P8
Letter
26-1/2"
260"
93-3/4"
3520
2,113
10,272.00
B265LG-4P7
Legal
32-1/2"
260"
81-3/4"
3080
2,085
10,430.90
B265LG-4P8
Legal
32-1/2"
260"
93-3/4"
3520
2,211
11,191.20
B265XR-4P5
X-Ray
38-1/2"
260"
93-3/4"
2200
2,389
11,794.00
B276LT-4P7
Letter
26-1/2"
302"
81-3/4"
3640
2,265
11,324.70
B276LT-4P8
Letter
26-1/2"
302"
93-3/4"
4160
2,494
12,131.20
B276LG-4P7
Legal
32-1/2"
302"
81-3/4"
3640
2,460
12,315.50
B276LG-4P8
Legal
32-1/2"
302"
93-3/4"
4160
2,607
13,211.70
B276XR-4P5
X-Ray
38-1/2"
302"
93-3/4"
2600
2,820
13,924.80
*All widths include necessary overtravel on each side of the ­system. Please NOTE systems up to a 4/3 configuration do not require overtravel, deduct 4" off width of system.
Single rivet shelf supports replace front Kick Plate and ­standard support on bottom shelf allowing for easy attachment to mobile carriages. Holes are prepunched into single
rivet support to match up with corresponding holes on TrakSlider carriages. All complete systems include TrakSlider Top Shelf Supports.
TEL: 800-828-8018
www.datumfiling.com • sales@datumfiling.com
68
EFFECTIVE FEBRUARY 1, 2012
Prices and specifications subject to change without notice.
42" Wide Complete TriSlider Systems
all complete systems do not include dividers. please refer to page 44 for divider information
Includes 7 or 8 level 4Post™ Shelving for Letter or Legal Depth. X-Ray Shelving includes 5 level 4Post™ Shelving.
TriSlider Systems
Item #
Media
Overall Depth
Width
Height
LFI
Est Lbs.
List Price
T221LT-4P7
Letter
41”
88”
82-3/4”
1120
797
4,068.80
T221-LT-4P8
Letter
41”
88”
94-3/4”
1280
870
4,325.90
T221LG-4P7
Legal
49-1/2”
88”
82-3/4”
1120
860
4,413.20
T221LG-4P8
Legal
49-1/2”
88”
94-3/4”
1280
923
4,698.20
T221XR-4P5
X-Ray
58-1/2”
88”
94-3/4”
800
973
4,946.80
T232LT-4P7
Letter
41”
130”
82-3/4”
1960
1,372
7,026.70
T232LT-4P8
Letter
41”
130”
94-3/4”
2240
1,499
7,474.20
T232LG-4P7
Legal
49-1/2”
130”
82-3/4”
1960
1,479
7,616.10
T232LG-4P8
Legal
49-1/2”
130”
94-3/4”
2240
1,584
8,112.10
T232XR-4P5
X-Ray
58-1/2”
130”
94-3/4”
1400
1,673
8,540.20
T243LT-4P7
Letter
41”
172”
82-3/4”
2800
1,947
9,983.40
T243LT-4P8
Letter
41”
172”
94-3/4”
3200
2,128
10,621.30
T243LG-4P7
Legal
49-1/2”
172”
82-3/4”
2800
2,098
10,817.70
T243LG-4P8
Legal
49-1/2”
172”
94-3/4”
3200
2,245
11,526.00
T243XR-4P5
X-Ray
58-1/2”
172”
94-3/4”
2000
2,373
12,136.00
T254LT-4P7
Letter
41”
214”
82-3/4”
3640
2,522
12,940.10
T254LT-4P8
Letter
41”
214”
94-3/4”
4160
2,757
13,768.30
T254LG-4P7
Legal
49-1/2”
214”
82-3/4”
3640
2,717
14,019.40
T254LG-4P8
Legal
49-1/2”
214”
94-3/4”
4160
2,906
14,939.80
T254XR-4P5
X-Ray
58-1/2”
214”
94-3/4”
2600
3,073
15,729.40
T265LT-4P7
Letter
41”
260”
82-3/4”
4480
3,098
15,897.90
T265LT-4P8
Letter
41”
260”
94-3/4”
5120
3,387
16,915.40
T265LG-4P7
Legal
49-1/2”
260”
82-3/4”
4480
3,336
17,222.30
T265LG-4P8
Legal
49-1/2”
260”
94-3/4”
5120
3,567
18,353.80
T265XR-4P5
X-Ray
58-1/2”
260”
94-3/4”
3200
3,773
19,324.00
T276LT-4P7
Letter
41”
302”
82-3/4”
5320
3,672
18,853.40
T276LT-4P8
Letter
41”
302”
94-3/4”
6080
4,015
20,063.70
T276LG-4P7
Legal
49-1/2”
302”
82-3/4”
5320
3,955
20,424.00
T276LG-4P8
Legal
49-1/2”
302”
94-3/4”
6080
4,288
21,766.40
T276XR-4P5
X-Ray
58-1/2”
302”
94-3/4”
3800
4,476
22,917.30
*All widths include necessary overtravel on each side of the ­system. Please NOTE systems up to a 4/3 configuration do not require overtravel, deduct 4" off width of
system. Single rivet shelf supports replace front Kick Plate and ­standard support on bottom shelf allowing for easy attachment to mobile carriages. Holes are prepunched
into single rivet support to match up with corresponding holes on TrakSlider carriages. All complete systems include TrakSlider Top Shelf Supports.
TEL: 800-828-8018
www.datumfiling.com • sales@datumfiling.com
69
EFFECTIVE FEBRUARY 1, 2012
Prices and specifications subject to change without notice.
48" Wide Complete BiSlider Systems
all complete systems do not include dividers. please refer to page 44 for divider information
Includes7 or 8 level 4Post™ Shelving for Letter or Legal Depth. X-Ray Shelving includes 5 level 4Post™ Shelving.
BiSlider Systems
Item #
Media
Overall Depth
W
H
LFI
Est Lbs.
List Price
B821LT-4P7
Letter
26-1/2"
100"
81-3/4"
966
606
2,837.70
B821LT-4P8
Letter
26-1/2"
100"
93-3/4"
1,104
670
3,044.10
B821LG-4P7
Legal
32-1/2"
100"
81-3/4"
996
650
3,113.10
B821LG-4P8
Legal
32-1/2"
100"
93-3/4"
1,104
699
3,344.80
B821XR-4P5
X-Ray
38-1/2"
100"
93-3/4"
690
732
3,509.70
B832LT-4P7
Letter
26-1/2"
148"
81-3/4"
1,610
999
4,698.20
B832LT-4P8
Letter
26-1/2"
148"
93-3/4"
1,840
1,104
5,041.40
B832LG-4P7
Legal
32-1/2"
148"
81-3/4"
1,610
1,070
5,140.80
B832LG-4P8
Legal
32-1/2"
148"
93-3/4"
1,840
1,144
5,522.90
B832XR-4P5
X-Ray
38-1/2"
148"
93-3/4"
1,150
1,206
5,798.20
B843LT-4P7
Letter
26-1/2"
196"
81-3/4"
2,254
1,392
6,561.00
B843LT-4P8
Letter
26-1/2"
196"
93-3/4"
2,576
1,538
7,038.80
B843LG-4P7
Legal
32-1/2"
196"
81-3/4"
2,254
1,490
7,171.00
B843LG-4P8
Legal
32-1/2"
196"
93-3/4"
2,576
1,589
7,702.20
B843XR-4P5
X-Ray
38-1/2"
196"
93-3/4"
1,610
1,680
8,086.60
B854LT-4P7
Letter
26-1/2"
249"
81-3/4"
2,898
1,785
8,422.60
B854LT-4P8
Letter
26-1/2"
249"
93-3/4"
3,312
1,972
9,035.00
B854LG-4P7
Legal
32-1/2"
249"
81-3/4"
2,898
1,910
9,198.70
B854LG-4P8
Legal
32-1/2"
249"
93-3/4"
3,312
2,034
9,874.20
B854XR-4P5
X-Ray
38-1/2"
249"
93-3/4"
2,070
2,154
10,375.10
B865LT-4P7
Letter
26-1/2"
296"
81-3/4"
3,542
2,178
10,286.50
B865LT-4P8
Letter
26-1/2"
296"
93-3/4"
4,048
2,406
11,033.60
B865LG-4P7
Legal
32-1/2"
296"
81-3/4"
3,542
2,330
11,218.00
B865LG-4P8
Legal
32-1/2"
296"
93-3/4"
4,048
2,479
12,059.60
B865XR-4P5
X-Ray
38-1/2"
296"
93-3/4"
2,530
2,628
12,662.40
B876LT-4P7
Letter
26-1/2"
340"
81-3/4"
3,542
2,573
12,149.30
B876LT-4P8
Letter
26-1/2"
340"
93-3/4"
4,784
2,840
13,031.00
B876LG-4P7
Legal
32-1/2"
340"
81-3/4"
3,542
2,750
13,255.40
B876LG-4P8
Legal
32-1/2"
340"
93-3/4"
4,784
2,924
14,238.90
B876XR-4P5
X-Ray
38-1/2"
340"
93-3/4"
2,990
3,102
14,950.70
TEL: 800-828-8018
www.datumfiling.com • sales@datumfiling.com
70
EFFECTIVE FEBRUARY 1, 2012
Prices and specifications subject to change without notice.
48" Wide Complete Bi & TriSlider Systems
all complete systems do not include dividers. please refer to page 44 for divider information
Includes7 or 8 level 4Post™ Shelving for Letter or Legal Depth. X-Ray Shelving includes 5 level 4Post™ Shelving.
TriSlider Systems
Item #
Media
Overall Depth
W
H
LFI
Est Lbs.
List Price
T821LT-4P7
Letter
41”
100”
82-3/4”
1,288
896
4,346.50
T821LT-4P8
Letter
41”
100”
94-3/4”
1,472
983
4,626.60
T821LG-4P7
Legal
49-1/2”
100”
82-3/4”
1,288
956
4,731.00
T821LG-4P8
Legal
49-1/2”
100”
94-3/4”
1,472
1,019
5,043.80
T821XR-4P5
X-Ray
58-1/2”
100”
82-3/4”
920
1,103
5,293.70
T832LT-4P7
Letter
41”
148”
94-3/4”
2,254
1,545
6,294.20
T832LT-4P8
Letter
41”
148”
82-3/4”
2,576
1,696
7,994.50
T832LG-4P7
Legal
49-1/2”
148”
94-3/4”
2,254
1,645
8,165.40
T832LG-4P8
Legal
49-1/2”
148”
82-3/4”
2,576
1,747
8,710.00
T832XR-4P5
X-Ray
58-1/2”
148”
94-3/4”
1,610
1,881
9,140.50
T843LT-4P7
Letter
41”
196”
82-3/4”
3,220
2,194
10,667.40
T843LT-4P8
Letter
41”
196”
94-3/4”
3,680
2,409
11,362.30
T843LG-4P7
Legal
49-1/2”
196”
82-3/4”
3,220
2,334
11,600.00
T843LG-4P8
Legal
49-1/2”
196”
94-3/4”
3,680
2,475
12,376.10
T843XR-4P5
X-Ray
58-1/2”
196”
82-3/4”
2,300
2,659
12,988.60
T854LT-4P7
Letter
41”
249”
94-3/4”
4,186
2,843
13,827.80
T854LT-4P8
Letter
41”
249”
82-3/4”
4,784
3,122
14,730.00
T854LG-4P7
Legal
49-1/2”
249”
94-3/4”
4,186
3,023
15,033.30
T854LG-4P8
Legal
49-1/2”
249”
82-3/4”
4,784
3,203
16,039.80
T854XR-4P5
X-Ray
58-1/2”
249”
94-3/4”
2,990
3,437
16,834.20
T865LT-4P7
Letter
41”
296”
82-3/4”
5,152
3,492
16,987.00
T865LT-4P8
Letter
41”
296”
94-3/4”
5,888
3,835
18,097.90
T865LG-4P7
Legal
49-1/2”
296”
82-3/4”
5,152
3,712
18,467.70
T865LG-4P8
Legal
49-1/2”
296”
94-3/4”
5,888
3,931
19,706.00
T865XR-4P5
X-Ray
58-1/2”
296”
82-3/4”
3,680
4,215
20,681.00
T876LT-4P7
Letter
41”
340”
94-3/4”
6,118
4,141
20,146.20
T876LT-4P8
Letter
41”
340”
82-3/4”
6,992
4,548
21,465.70
T876LG-4P7
Legal
49-1/2”
340”
94-3/4”
6,118
4,401
21,902.30
T876LG-4P8
Legal
49-1/2”
340”
82-3/4”
6,992
4,659
23,372.20
T876XR-4P5
X-Ray
58-1/2”
340”
94-3/4”
4,370
4,993
24,529.10
*All widths include necessary overtravel on each side of the ­system. Please NOTE systems up to a 4/3 configuration do not require overtravel, deduct 4" off width of system.
Single rivet shelf supports replace front Kick Plate and ­standard support on bottom shelf allowing for easy attachment to mobile carriages. Holes are prepunched into single
rivet support to match up with corresponding holes on TrakSlider carriages. All complete systems include TrakSlider Top Shelf Supports.
TEL: 800-828-8018
www.datumfiling.com • sales@datumfiling.com
71
EFFECTIVE FEBRUARY 1, 2012
Prices and specifications subject to change without notice.
Standard Shelf Spacing Chart
STANDARD & MEDIUM DUTY 4POST SHELVING, NO BASE (MOBILE READY)
Clear
Opening
Required
40-1/4” High
64-1/4” High
76-1/4” High
85-1/4” High
2-1/4”
13 + 0”
21 + 0”
25 + 0”
28 + 0”
29 + 0”
32 + 0”
3-3/4”
8 + 3”
14 + 0”
16 + 3”
18 + 3”
19 + 1-1/2”
21 + 1-1/2”
5-1/4”
6 + 3”
10 + 3”
12 + 3”
14 + 0”
14 + 3”
16 + 0”
6-3/4”
5 + 1-1/2”
8 + 3”
10 + 0”
11 + 1-1/2”
11 + 4-1/2”
12 + 6”
8-1/4”
4 + 3”
7 + 0”
8 + 3”
9 + 3”
9 + 6”
10 + 6”
9-3/4”
3 + 7-1/2”
6 + 0”
7 + 1-1/2”
8 + 0”
8 + 3”
9 + 1-1/2”
11-1/4”
3 + 3”
5 + 3”
6 + 3”
7 + 0”
7 + 3”
8 + 0”
12-3/4”
2 + 12”
4 + 9”
5 + 7-1/2”
6 + 3”
6 + 6”
7 + 1-1/2”
14-1/4”
2 + 9”
4 + 3”
5 + 0”
5 + 9”
5 + 12”
6 + 6”
15-3/4”
2 + 6”
3 + 13-1/2”
4 + 9”
5 + 1-1/2”
5 + 4-1/2”
5 + 13-1/2”
17-1/4”
2 + 3”
3 + 9”
4 + 3”
4 + 12”
4 + 15”
5 + 6”
18-3/4”
2 + 0”
3 + 4-1/2”
3 + 16-1/2”
4 + 6”
4 + 9”
4 + 18”
Number of Shelf Openings By Shelving Height
88-1/4” High
97-1/4” High
20-1/4”
1 + 18”
3 + 0”
3 + 12”
4 + 0”
4 + 3”
4 + 12”
21-3/4”
1 + 16-1/2”
2 + 18”
3 + 7-1/2”
3 + 16-1/2”
3 + 19-1/2”
4 + 6”
STANDARD & MEDIUM DUTY 4POST SHELVING WITH 2" KICK PLATE
Clear
Opening
Required
Number of Shelf Openings By Shelving Height
40-1/4” High
64-1/4” High
76-1/4” High
85-1/4” High
88-1/4” High
97-1/4” High
2-1/4”
12 + 1-1/2”
20 + 1-1/2”
24 + 1-1/2”
27 + 1-1/2”
28 + 1-1/2”
31 + 1-1/2”
3-3/4”
8 + 1-1/2”
13 + 3”
16 + 1-1/2”
18 + 1-1/2”
19 + 0”
21 + 0”
5-1/4”
6 + 1-1/2”
10 + 1-1/2”
12 + 1-1/2”
13 + 4-1/2”
14 + 1-1/2”
15 + 4-1/2”
6-3/4”
5 + 0”
8 + 1-1/2”
9 + 6”
11 + 0”
11 + 3”
12 + 4-1/2”
8-1/4”
4 + 1-1/2”
6 + 7-1/2”
8 + 1-1/2”
9 + 1-1/2”
9 + 4-1/2”
10 + 4-1/2”
9-3/4”
3 + 6”
5 + 9”
7 + 0”
7 + 9”
8 + 1-1/2”
9 + 0”
7 + 10-1/2”
11-1/4”
3 + 1-1/2”
5 + 1-1/2”
6 + 1-1/2”
6 + 10-1/2”
7 + 1-1/2”
12-3/4”
2 + 10-1/2”
4 + 7-1/2”
5 + 6”
6 + 1-1/2”
6 + 4-1/2”
7 + 0”
14-1/4”
2 + 7-1/2”
4 + 1-1/2”
4 + 13-1/2”
5 + 7-1/2”
5 + 10-1/2”
6 + 4-1/2”
15-3/4”
2 + 4-1/2”
3 + 12”
4 + 7-1/2”
5 + 0”
5 + 3”
5 + 12”
17-1/4”
2 + 1-1/2”
3 + 7-1/2”
4 + 1-1/2”
4 + 10-1/2”
4 + 13-1/2”
5 + 4-1/2”
18-3/4”
1 + 18”
3 + 3”
3 + 15”
4 + 4-1/2”
4 + 7-1/2”
4 + 16-1/2”
20-1/4”
1 + 16-1/2”
2 + 19-1/2”
3 + 10-1/2”
3 + 19-1/2”
4 + 1-1/2”
4 + 10-1/2”
21-3/4”
1 + 15”
2 + 16-1/2”
3 + 6”
3 + 15”
3 + 18”
4 + 4-1/2”
STANDARD & MEDIUM DUTY 4POST SHELVING WITH 4" KICK PLATE Clear
Opening
Required
Number of Shelf Openings By Shelving Height
40-1/4” High
2-1/4”
3-3/4”
64-1/4” High
76-1/4” High
85-1/4” High
88-1/4” High
97-1/4” High
12 + 0”
20 + 0”
24 + 0”
27 + 0”
28 + 0”
31 + 0”
8 + 0”
13 + 1-1/2”
16 + 0”
18 + 0”
18 + 3”
20 + 3”
5-1/4”
6 + 0”
10 + 0”
12 + 0”
13 + 3”
14 + 0”
15 + 3”
6-3/4”
4 + 6”
8 + 0”
9 + 4-1/2”
10 + 6”
11 + 1-1/2”
12 + 3”
8-1/4”
4 + 0”
6 + 6”
8 + 0”
9 + 0”
9 + 3”
10 + 3”
8 + 9”
9-3/4”
3 + 4-1/2”
5 + 7-1/2”
6 + 9”
7 + 7-1/2”
8 + 0”
11-1/4”
3 + 0”
5 + 0”
6 + 0”
6 + 9”
7 + 0”
7 + 9”
12-3/4”
2 + 9”
4 + 6”
5 + 4-1/2”
6 + 0”
6 + 3”
6 + 12”
14-1/4”
2 + 6”
4 + 0”
4 + 12”
5 + 6”
5 + 9”
6 + 3”
15-3/4”
2 + 3”
3 + 10-1/2”
4 + 6”
4 + 15”
5 + 1-1/2”
5 + 10-1/2”
17-1/4”
2 + 0”
3 + 6”
4 + 0”
4 + 9”
4 + 12”
5 + 3”
18-3/4”
1 + 16-1/2”
3 + 1-1/2”
3 + 13-1/2”
4 + 3”
4 + 6”
4 + 15”
20-1/4”
1 + 15”
2 + 18”
3 + 9”
3 + 18”
4 + 0”
4 + 9”
21-3/4”
1 + 13-1/2”
2 + 15”
3 + 4-1/2”
3 + 13-1/2”
3 + 16-1/2”
4 + 3”
TEL: 800-828-8018
www.datumfiling.com • sales@datumfiling.com
72
EFFECTIVE FEBRUARY 1, 2012
Prices and specifications subject to change without notice.
Standard Shelf Spacing Chart
HEAVY DUTY AND X-RAY DUTY 4POST SHELVING, NO BASE (MOBILE READY)
Clear
Number of Shelf Openings By Shelving Height
Opening
40-1/4” High 64-1/4” High 76-1/4” High 85-1/4” High 88-1/4” High 97-1/4” High
Required
3-1/4”
8 + 3”
14 + 0”
16 + 3”
18 + 3”
19 + 1-1/2”
21 + 1-1/2”
4-3/4”
6 + 3”
10 + 3”
12 + 3”
14 + 0”
14 + 3”
16 + 0”
6-1/4”
5 + 1-1/2”
8 + 3”
10 + 0”
11 + 1-1/2”
11 + 4-1/2”
12 + 6”
7-3/4”
4 + 3”
7 + 0”
8 + 3”
9 + 3”
9 + 6”
10 + 6”
9-1/4”
3 + 7-1/2”
6 + 0”
7 + 1-1/2”
8 + 0”
8 + 3”
9 + 1-1/2”
10-3/4”
3 + 3”
5 + 3”
6 + 3”
7 + 0”
7 + 3”
8 + 0”
12-1/4”
2 + 12”
4 + 9”
5 + 7-1/2”
6 + 3”
6 + 6”
7 + 1-1/2”
13-3/4”
2 + 9”
4 + 3”
5 + 0”
5 + 9”
5 + 12”
6 + 6”
15-1/4”
2 + 6”
3 + 13-1/2”
4 + 9’
5 + 1-1/2”
5 + 4-1/2”
5 + 13-1/2”
16-3/4”
2 + 3”
3 + 9”
4 + 3”
4 + 12”
4 + 15”
5 + 6”
18-1/4”
2 + 0”
3 + 4-1/2”
3 + 16-1/2”
4 + 6”
4 + 9”
4 + 18”
19-3/4”
1 + 18”
3 + 0”
3 + 12”
4 + 0”
4 + 3”
4 + 12”
21-1/4”
1 + 16-1/2”
2 + 18”
3 + 7-1/2”
3 + 16-1/2”
3 + 19-1/2”
4 + 6”
22-3/4”
1 + 15”
2 + 15”
3 + 3”
3 + 12”
3 + 15”
4 + 0”
HEAVY DUTY AND X-RAY DUTY 4POST SHELVING WITH 2" KICK PLATE Clear
Number of Shelf Openings By Shelving Height
Opening
40-1/4” High 64-1/4” High 76-1/4” High 85-1/4” High 88-1/4” High 97-1/4” High
Required
3-1/4”
8 + 1-1/2”
13 + 3”
16 + 1-1/2”
18 + 1-1/2”
19 + 0”
21 + 0”
4-3/4”
6 + 1-1/2”
10 + 1-1/2”
12 + 1-1/2”
13 + 4-1/2”
14 + 1-1/2”
15 + 4-1/2”
6-1/4”
5 + 0”
8 + 1-1/2”
9 + 6”
11 + 0”
11 + 3”
12 + 4-1/2”
7-3/4”
4 + 1-1/2”
6 + 7-1/2”
8 + 1-1/2”
9 + 1-1/2”
9 + 4-1/2”
10 + 4-1/2”
9-1/4”
3 + 6”
5 + 9”
7 + 0”
7 + 9”
8 + 1-1/2”
9 + 0”
10-3/4”
3 + 1-1/2”
5 + 1-1/2”
6 + 1-1/2”
6 + 10-1/2”
7 + 1-1/2”
7 + 10-1/2”
12-1/4”
2 + 10-1/2”
4 + 7-1/2”
5 + 6”
6 + 1-1/2”
6 + 4-1/2”
7 + 0”
13-3/4”
2 + 7-1/2”
4 + 1-1/2”
4 + 13-1/2”
5 + 7-1/2”
5 + 10-1/2”
6 + 4-1/2”
15-1/4”
2 + 4-1/2”
3 + 12”
4 + 7-1/2”
5 + 0”
5 + 3”
5 + 12”
16-3/4”
2 + 1-1/2”
3 + 7-1/2”
4 +1-1/2”
4 + 10-1/2”
4 +13-1/2”
5 + 4-1/2”
18-1/4”
1 + 18”
3 + 3”
3 + 15”
4 + 4-1/2”
4 + 7-1/2”
4 + 16-1/2”
19-3/4”
1 + 16-1/2”
2 + 19-1/2”
3 + 10-1/2”
3 + 19-1/2”
4 + 1-1/2”
4 + 10-1/2”
21-1/4”
1 + 15”
2 + 16-1/2”
3 + 6”
3 + 15”
3 + 18”
4 + 4-1/2”
22-3/4”
1 + 13-1/2”
2 +13-1/2”
3 + 1-1/2”
3 + 10-1/2”
3 + 13-1/2”
3 + 22-1/2”
HEAVY DUTY AND X-RAY DUTY 4POST SHELVING WITH 4" KICK PLATE Clear
Number of Shelf Openings By Shelving Height
Opening
40-1/4” High 64-1/4” High 76-1/4” High 85-1/4” High 88-1/4” High 97-1/4” High
Required
3-1/4”
8 + 0”
13 + 1-1/2”
16 + 0”
18 + 0”
18 + 3”
20 + 3”
4-3/4”
6 + 0”
10 + 0”
12 + 0”
13 + 3”
14 + 0”
15 + 3”
6-1/4”
4 + 6”
8 + 0”
9 + 4-1/2”
10 + 6”
11 + 1-1/2”
12 + 3”
7-3/4”
4 + 0”
6 + 6”
8 + 0”
9 + 0”
9 + 3”
10 + 3”
9-1/4”
3 + 4-1/2”
5 + 7-1/2”
6 + 9”
7 + 7-1/2”
8 + 0”
8 + 9”
10-3/4”
3 + 0”
5 + 0”
6 + 0”
6 + 9”
7 + 0”
7 + 9”
12-1/4”
2 + 9”
4 + 6”
4 + 4-1/2”
6 + 0”
6 + 3”
6 + 12”
13-3/4”
2 + 6”
4 + 0”
4 + 12”
5 + 6”
5 + 9”
6 + 3”
15-1/4”
2 + 3”
3 + 10-1/2”
4 + 6”
4 + 15”
5 + 1-1/2”
5 + 10-1/2”
16-3/4”
2 + 0”
3 + 6”
4 + 0”
4 + 9”
4 + 12’
5 + 3”
18-1/4”
1 + 16-1/2”
3 + 1-1/2”
3 + 13-1/2”
4 + 3”
4 + 6”
4 + 15”
19-3/4”
1 + 15”
2 + 18”
3 + 9”
3 + 18”
4 + 0”
4 + 9”
21-1/4”
1 + 13-1/2”
2 + 15”
3 + 4-1/2”
3 + 13-1/2”
3 + 16-1/2”
4 + 3”
22-3/4”
1 + 12”
2 + 12”
3 + 0”
3 + 9”
3 + 12”
3 + 21”
TEL: 800-828-8018
www.datumfiling.com • sales@datumfiling.com
73
EFFECTIVE FEBRUARY 1, 2012
Prices and specifications subject to change without notice.
89 Church Road, PO Box 355
Emigsville, PA 17318-0355
Factory / 1-800-828-8018
National / 1-800-FILING-1 Fax / 1-888-FILING-1 (345-4641)
www.datumfiling.com / sales@datumfiling.com