SLP Low Profile
Technical Specifications
SLP
SLP Low Profile combines a sleek low-profile design, smooth white acrylic lens
and die-cast brushed metal ends to create a high-tech designer appearance. The
unit can be surface mounted or cable hung with 1/16” aircraft cable, as shown.
The SLP is ideal for office, residential and light commercial space.
Pr ojec t
C at alog N um ber
Ty pe
D at e
• Die-formed heavy gauge steel construction
• High gloss baked white enamel finish
• T8 and LED available
• UL listed
HOUSING Die-formed heavy gauge steel with high-gloss,
baked white enamel finish over rust inhibiting phosphate
coat. Ends are hand finished to a stainless steel look. Inside
is grooved to accept acrylic lens and avoid light loss.
SHIELDING Smooth milk white formed acrylic.
ELECTRICAL Fully wired for universal 120-277V, 50-60Hz
operation with thermally protected, automatic resetting
Class P, sound rated A electronic ballast as standard unless
otherwise specified. UL listed.
MOUNTING Flush mounted or cable hung with CACC
Suspension Kit. CACC Suspension Kit includes white
cord, white canopies and 1/16” aircraft cable. Individual
mounting only.
LED LAMPS This product offers LED lamps. LED lamps may
be ordered as an accessory in place of 2' and 4' fluorescent
lamps. Not compatible with emergency lighting or dimming
options. See ordering information and performance table for
more data.
WARRANTY 5 year manufacturers limited warranty on LED
T8 Lamps.
SLP Low Profile Configuration
SERIES
SLP
ENDS
M = Brushed metal
W = White
LAMPS
For LED Tubes,
see LED Lamps below
217 = (2) 17W 24” T8
232 = (2) 32W 48” T8
(T8 lamp type is required when
specifying LED lamps)
ELS OPTIONS
ELS1 = Emergency Lighting (low lumens)
ELS2 = Emergency Lighting (medium lumens)
ELS3 = Emergency Lighting (high lumens)
BALLAST
B11 = Electronic T8
B11HP(x) = HPT8*
B22 = LPF T8/T12
D = Dimming (specify ballast; not
compatible with LED Lamps)
VOLTAGE
UNV = 120-277V
120 = 120V
277 = 277V
ACCESSORIES
CACC(xx) = Cable Kit, includes 2 cables,
mounting hardware, white power
cord and canopies; specify length
in inches (48 or 72)
Note: Not compatible with LED Lamps
LAMP ACCESSORIES (SHIPPED SEPARATELY)
(Specify Lamps - 730/735/741 or 830/835/841/850)
(U-lamp and TT lamps not installed)
LED LAMPS (SHIPPED SEPARATELY)*
LE82M3 = 2' 9W 3000K 1150lm
LE82M4 = 2' 9W 4000K 1150lm
LE82M5 = 2' 9W 5000K 1150lm
LE84M3 = 4' 14W 3000K 1800lm
LE84M4 = 4' 14W 4000K 1800lm
LE84M5 = 4' 14W 5000K 1800lm
LE84H3 = 4' 17W 3000K 1800lm
LE84H3 = 4' 17W 3000K 1800lm
LE84H3 = 4' 17W 3000K 1800lm
* Compatible with 2' and 4' T8 configurations only. See performance data table for more information.
FOR CUSTOM OPTIONS AND ACCESSORIES, CONTACT FACTORY. SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE.
08242015 REV A
(800) 523-3602 • www.simkar.com
SLP Low Profile
Technical Specifications
Dimensions
5 7/8"
4 1/4"
48"
1 1/4"
3 1/2"
4"
2 7/8"
24"
3"
4"
1 1/8"
7/8" K.O.
1 1/8"
7/8" K.O.
10 1/8"
96"
4"
24"
1 1/8"
1"
24"
3 1/2"
4"
7/8" K.O.
LED T8 Replacement Lamp Performance
LAMP
COLOR
TEMPERATURE
NOMINAL
LENGTH
CRI
BEAM ANGLE
LAMP
WATTAGE
LAMP LUMENS
LE82M3
3000K
2'
>80
220º
9W
LE82M4
4000K
2'
>80
220º
LE82M5
5000K
2'
>80
220º
LE84M3
3000K
4’
>80
LE84M4
4000K
4’
>80
INITIAL LUMENS
.78 BF
.88 BF
1.18 BF
LAMP
EFFICACY
1150
945
1080
1370
127 lm/W
9W
1150
1020
1170
1490
127 lm/W
9W
1150
1040
1200
1520
127 lm/W
220º
14W
1800
1620
1870
2490
129 lm/W
220º
14W
1800
1670
1940
2560
129 lm/W
LE84M5
5000K
4’
>80
220º
14W
1800
1720
2000
2620
129 lm/W
LE84H3
3000K
4’
>80
220º
17W
2200
1930
2200
2800
129 lm/W
LE84H4
4000K
4’
>80
220º
17W
2200
1990
2300
2930
129 lm/W
LE84H5
5000K
4’
>80
220º
17W
2200
2050
2370
3080
129 lm/W
FOR CUSTOM OPTIONS AND ACCESSORIES, CONTACT FACTORY. SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE.
08242015 REV A
(800) 523-3602 • www.simkar.com