CERTIFICATE OF COMPLIANCE
Certificate Number
Report Reference
Issue Date
Issued to:
This is to certify that
representative samples of
20140314-E177464
E177464-19970530
2014-MARCH-14
CABLOFIL INC
8319 ILLINOIS STATE RTE 4,
MASCOUTAH IL 62258
CABLE TRAYS
See Addendum Page
Have been investigated by UL in accordance with the
Standard(s) indicated on this Certificate.
Standard(s) for Safety:
Additional Information:
NEMA VE 1 METAL CABLE TRAY SYSTEMS
CSA-C22.2 No. 126, Cable Tray Systems
See the UL Online Certifications Directory at
www.ul.com/database for additional information
Only those products bearing the UL Classification Mark for the U.S. and Canada should be considered as being
covered by UL's Classification and Follow-Up Service and meeting the appropriate U.S. and Canadian
requirements.
The UL Classification Mark includes: the UL in a circle symbol:
with the word “CLASSIFIED” (as
shown); a control number (may be alphanumeric) assigned by UL; a statement to indicate the extent
of UL’s evaluation of the product; and the product category name (product identity) as indicated in
the appropriate UL Directory. The UL Classification Mark for Canada includes: the UL Classification
Mark for Canada:
with the word “CLASSIFIED” (as shown); a control number (may be
alphanumeric) assigned by UL; a statement to indicate the extent of UL’s evaluation of the product;
and the product category name (product identity) in English, French, or English/French as indicated
in the appropriate UL Directory.
Look for the UL Classification Mark on the product.
William R. Carney, Director, North American Certification Programs
UL LLC
Any information and documentation involving UL Mark services are provided on behalf of UL LLC (UL) or any authorized licensee of UL. For questions, please
contact a local UL Customer Service Representative at www.ul.com/contactus
Page 1 of 3
CERTIFICATE OF COMPLIANCE
Certificate Number
Report Reference
Issue Date
20140314-E177464
E177464-19970530
2014-MARCH-14
This is to certify that representative samples of the product as specified on this certificate were tested
according to the current UL requirements.
Models:
USC, CNC - Wire Mesh Cable Trays Cat. Nos. CF 54/300, /400, /450, /500, /600; CF 105/150, /200,
/300, /400, /450, /500, /600; CF 150 Series, ZF 54/300, /400, /450, /500, /600; ZF 105/150, /200, /300,
/400, /450, /500, /600; ZF 150 Series. See Table below for individual Part Numbers.
CNC - Wire Mesh Cable Trays Cat. Nos. CF 30/50, 30/100, 30/150, 30/200; CF 54/50, 54/100, 54/150,
54/200; CF 105/100; ZF 54/50, 54/100, 54/150, 54/200, ZF 105/100, G-Mini; CFG 50/100, CFG 50/150,
CFG 50/200.
USC - Wire Mesh Cable Trays Cat. Nos. CF 30/300, 54/550, 54/750, 54/900, 105/550, 105/750,
105/900, 150/550, 150/750 ZF 30/300, 54/550, 54/750, 54/900, 105/550, 105/750, 105/900, 150/550,
150/750.
USC - Wire Mesh Cable Trays; Custom Order Sizes Cat. Nos. CF Series, ZF Series. See
Nomenclature Table for Cat. Nos. Cross-section Area must be Minimum 0.20 sq. in.
USC - Ventilated Cable Trays HBSP Series, HBSM Series; Unventilated Cable Trays Series, GBSM
Series. See Table below for individual Part Numbers.
USC - Ventilated and Unventilated Cable Tray Corner Splices Cat. Nos. , FTEC 50, FTEC 100;
Ventilated Cable Tray Connection Cat. No. EZ Clic
USC, CNC - Wire Mesh Cable Tray Connector and Coupler Fittings Coupling A, Coupling B, EDRN,
SWK B, EDT, EZT 90, RADT 90 (may include suffixes designating size, material, and finish), RADT
9012 (may include suffixes designating size, material, and finish), ED275RSKIT (may include suffixes
designating size, material, and finish), ED1100RSKIT (may include suffixes designating size, material,
and finish).
USC, CNC – Trough Type Cable Trays, FT Series and VT Series.
William R. Carney, Director, North American Certification Programs
UL LLC
Any information and documentation involving UL Mark services are provided on behalf of UL LLC (UL) or any authorized licensee of UL. For questions, please
contact a local UL Customer Service Representative at www.ul.com/contactus
Page 2 of 3
CERTIFICATE OF COMPLIANCE
Certificate Number
Report Reference
Issue Date
Tray Series +
30
54
105
20140314-E177464
E177464-19970530
2014-MARCH-14
Part Number +
30/50
30/100
30/150
30/200
30/300
54/50
54/100
54/150
54/200
54/300
54/400
54/450
54/500
54/600
105/100
105/150
105/200
105/300
105/400
105/450
105/500
105/600
Tray Series +
150
Part Number +
150/150
150/200
150/250
150/300
150/400
150/450
150/500
150/600
150/900
HBSP
HBSP 2/6
HBSP 2/12
HBSP 4/6
HBSP 4/12
FT/VT
50/50
50/100
50/200
50/300
100/100
100/200
100/300
100/500
100/600
+ Includes prefix letters CF (waved) or ZF (straight) to indicate top wire
style, waved or straight, respectively. May include additional suffix letters EZ, GC, BL or PE to indicate
finish type. May include suffix IN304 or IN316 to indicate stainless steel type. See Nomenclature
section for alternate Model designations.
William R. Carney, Director, North American Certification Programs
UL LLC
Any information and documentation involving UL Mark services are provided on behalf of UL LLC (UL) or any authorized licensee of UL. For questions, please
contact a local UL Customer Service Representative at www.ul.com/contactus
Page 3 of 3
File E177464
Vol. 1
Sec. Gen.
Page 1
Issued:
Revised:
1997-05-30
2012-07-24
GENERAL
PRODUCT COVERED:
Cable Trays.
*
MARKINGS:
The following markings are required on each piece of straight section,
fitting, tee, and reducer. The marking shall be “permanent” and readily
visible. Permanent markings include die-stamping, etching, a Recognized
Component Marking System (labeling) or ink stamping that has been
investigated of Permanency of Marking.
1) the Listee’s name or a registered trademark, trade name or other
recognized symbol of identification including the UL File Number,
“E177464”,
2) the words “ventilated” or “non-ventilated” if applicable,
3) For straight sections of tray the rated load/span.The load class,
(Refer to Table 1 in CAN/CSA-C22.2 NO. 126.1 for the load class
designations and the table attached) may be additionally marked.
4) the type of material, such as stainless steel (including the type)and
if carbon steel, Type 1 (hot-dip galvanized) or Type 2 (mill
galvanized) as applicable.
Exception to Item 4: If the catalog number marked on the product would
readily lead the user to the required information published by the
manufacturer (i.e. sales parts lists)the type of material marking is
not mandatory.
5) steel or aluminum cable
bonding conductors, the
marked, “SUITABLE AS AN
minimum cross-sectional
tray systems are used as equipment grounding or
cable tray sections and fittings shall be
EQUIPMENT GROUNDING CONDUCTOR.” with the
area in accordance with the report.
6) a warning label to read, “WARNING! DO NOT USE AS A WALKWAY, LADDER, OR
SUPPORT FOR PERSONNEL. USE ONLY AS A MECHANICAL SUPOPORT FOR CABLES,
TUBING AND RACEWAYS.”
File E177464
Vol. 1
Sec. Gen.
Page 2
Issued:
Revised:
1997-05-30
2011-10-25
PRODUCT INFORMATION/INSTALLATION INSTRUCTIONS:
The manufacturer shall provide product information that includes the
following. The product information shall be provided in a readily available
form or with each shipment of cable tray.
1) a table or chart clearly indicating the maximum rated simple beam
loading in Kg/m or Lbs./ft. and the maximum recommended distance in
meters and/or feet between supports for each loading,
2) information on the alloys of aluminum or stainless steel, if such
alloys are used, and
3) Installation guidelines.
Load/Span Class Designations
Design load at varying support spacings in kg/m
Class
1.5 m
A
2.0 m
2.5 m
3.0 m
4.0 m
5.0 m
6.0 m
99
62
45
37
N/A
N/A
N/A
C(1)
259
164
119
97
N/A
N/A
N/A
D(1)
N/A
N/A
N/A
179
113
82
67
E
N/A
N/A
N/A
299
189
137
112
Model Designation
+
UL Test
Rated
Load
Kg/m
(lbs/ft)
Plated Steel
Support
Spacings
m (ft.)
Load/Span Class
Designations
Calculated
Load
Kg/m
(lbs/ft)
*54/50
3.0 (10)
N/A
54/100, 50/100
3.0 (10)
N/A
3.0 (10)
N/A
54/200, 50/200
3.0 (10)
N/A
26.9 (18.4)
*54/300
3.0 (10)
N/A
34.0 (23.2)
*54/400
3.0 (10)
A
63.7 (43.6)
*54/450
3.0 (10)
A
63.7 (43.6)
*54/500
3.0 (10)
A
65.6 (44.9)
54/150 , 50/150
20.3
(13.64)
9.7 (5.8)
15.3 (10.2)
+ Includes prefix letters CF (waved) or ZF (straight) to indicate top wire
style, waved or straight, respectively. May include additional suffix
letters EZ, BL or PE to indicate finish type.
File E177464
Model
Designation
*54/600
CF-30/200
Vol. 1
+
Sec. Gen.
UL Test
Rated Load
Kg/m
(lbs/ft)
Page 3
Plated Steel
Support
Spacings
m (ft.)
Issued:
Revised:
Load/Span Class
Designations
1997-05-30
2011-10-25
Calculated
Load
Kg/m
(lbs/ft)
65.6 (44.9)
11.0 (7.4)
3.0 (10)
3.0 (10)
A
N/A
9.9 (6.7)
1.5 (4.92)
N/A
3.0 (10)
N/A
3.0 (10)
A
105/200
3.0 (10)
A
56.6 (38.7)
105/300
3.0 (10)
A
83.5 (57.1)
105/400
3.0 (10)
C
97.0 (66.3)
105/450
3.0 (10)
C
97.0 (66.3)
105/500
3.0 (10)
C
97.0 (66.3)
3.0 (10)
C
G-mini
105/100
105/150
105/600
45.9 (30.84)
100.7
(67.66)
150/150
31.9 (21.8)
3.0 (10)
C
3.0 (10)
C
150/300
3.0 (10)
A
92.0 (62.9)
150/400
3.0 (10)
A
92.0 (62.9)
150/450
3.0 (10)
A
92.0 (62.9)
3.0 (10)
C
3.0 (10)
A
150/200
150/500
150/600
113.1
(76.00)
UL Test
98.0
(65.85)
104.1 (71.2)
85.4 (58.4)
+ Includes prefix letters CF (waved) or ZF (straight) to indicate top wire
style, waved or straight, respectively. May include additional suffix
letters EZ, BL or PE to indicate finish type.
File E177464
Vol. 1
Model Designation
+
Sec. Gen.
UL Test
Rated
Load
Kg/m
(lbs/ft)
Page 4
Stainless Steel
Support
Spacings
m (ft.)
Issued:
Revised:
1997-05-30
2011-10-25
Load/Span Class
Designations
Calculated
Load
Kg/m
(lbs/ft)
*54/50IN304
3.0 (10)
N/A
5.9 (3.5)
*54/100IN304
3.0 (10)
N/A
9.3 (6.1)
3.0 (10)
N/A
3.0 (10)
N/A
3.0 (10)
N/A
*54/400IN304
3.0 (10)
A
38.2 (25.66)
*54/450IN304
3.0 (10)
A
38.2 (25.66)
3.0 (10)
A
*54/600IN304
3.0 (10)
A
39.3 (26.40)
105/100IN304
3.0 (10)
N/A
19.1 (12.83)
3.0 (10)
N/A
105/200IN304
3.0 (10)
N/A
33.9 (22.77)
105/300IN304
3.0 (10)
A
50.1 (33.66)
105/400IN304
3.0 (10)
A
58.2 (39.10)
*54/150IN304
13.0
(8.73)
*54/200IN304
*54/300IN304
*54/500IN304
105/150IN304
29.2
(19.62)
40.1
(26.94)
22.4
(15.05)
16.1 (10.81)
+ Includes prefix letters CF (waved) or ZF (straight) to indicate top wire
style, waved or straight, respectively. May include suffix letter IN316 in
place of IN304 to indicate stainless steel type.
File E177464
Vol. 1
Model Designation
+
Sec. Gen.
UL Test
Rated
Load
Kg/m
(lbs/ft)
Page 5
Stainless Steel
Support
Spacings
m (ft.)
Issued:
New:
1997-05-30
2008-07-15
Load/Span Class
Designations
Calculated
Load
Kg/m
(lbs/ft)
105/450IN304
3.0 (10)
A
58.2 (39.10)
105/500IN304
3.0 (10)
A
58.2 (39.10)
3.0 (10)
A
3.0 (10)
A
105/600IN304
60.0
(40.31)
150/150IN304
41.6 (27.95)
150/200IN304
43.5
(29.23)
3.0 (10)
A
150/300IN304
58.9
(39.57)
3.0 (10)
A
150/400IN304
3.0 (10)
A
55.2 (37.09)
150/450IN304
3.0 (10)
A
55.2 (37.09)
150/500IN304
3.0 (10)
A
51.2 (34.40)
150/600IN304
3.0 (10)
A
51.2 (34.40)
+ Includes prefix letters CF (waved) or ZF (straight) to indicate top wire
style, waved or straight, respectively. May include suffix letter IN316 in
place of IN304 to indicate stainless steel type.
File E177464
Vol. 1
Sec. Gen.
Page 6
Issued:
Revised:
1997-05-30
2012-07-24
Plated Steel
Interpolated Load Rating Kg/m (lbs/ft)
Model Designation
+
Support Spacings m (ft.)
1.5 (5)
1.8 (6)
2.1 (7)
2.4 (8)
2.7 (9)
54/50, 50/50
45.3
(32.0)
25.7
(15.1)
18.9
(11.1)
15.5
(9.1)
12.2
(7.2)
54/100, 50/100
56.7
(39.4)
33.0
(22.3)
24.3
(16.4)
21.8
(15.9)
19.2
(12.5)
54/150 , 50/150
68.0
(46.5)
40.4
(27.6)
29.7
(20.3)
27.9
(19.1)
26.2
(17.9)
54/200, 50/200
79.3
(54.2)
53.2
(36.4)
39.1
(26.7)
36.2
(24.7)
33.2
(22.7)
54/300, 50/300
104.8
(71.6)
68.8
(47.1)
50.6
(34.6)
46.3
(31.7)
42.0
(28.7)
54/400
197.3
(134.9)
133.1
(91.0)
97.8
(66.8)
88.3
(60.3)
78.7
(53.8)
54/450
197.3
(134.9)
133.1
(91.0)
97.8
(66.8)
88.3
(60.3)
78.7
(53.8)
54/500
174.6
(119.4)
139.5
(95.4)
102.5
(70.1)
91.8
(62.8)
81.0
(55.4)
54/600
174.6
(119.4)
139.5
(95.4)
102.5
(70.1)
91.8
(62.8)
81.0
(55.4)
105/100, 100/100
99.8
(68.3)
67.9
(46.4)
49.9
(34.1)
44.6
(30.5)
39.3
(26.9)
105/150
144.0
(98.4)
88.1
(60.2)
64.7
(44.3)
59.9
(40.9)
47.3
(32.3)
105/200, 100/200
160.0
(109.4)
111.5
(76.2)
81.9
(56.0)
75.9
(51.9)
69.9
(47.8)
105/300, 100/300
207.7
(142.0)
185.4
(126.8)
136.2
(93.1)
130.5
(89.2)
103.1
(70.5)
105/400
220.9
(151.0)
190.0
(129.9)
139.6
(95.4)
129.7
(88.7)
119.7
(81.9)
105/450
220.9
(151.0)
190.0
(129.9)
139.6
(95.4)
129.7
(88.7)
119.7
(81.9)
105/500, 100/500
220.9
(151.0)
190.0
(129.9)
139.6
(95.4)
129.7
(88.7)
119.7
(81.9)
105/600, 100/600
220.9
(151.0)
190.0
(129.9)
139.6
(95.4)
129.7
(88.7)
119.7
(81.9)
+ Includes prefix letters CF (waved) or ZF (straight) to indicate top wire
style, waved or straight, respectively. May include additional suffix
letters EZ, BL or PE to indicate finish type.
File E177464
Vol. 1
Sec. Gen.
Page 7
Issued:
New:
1997-05-30
2008-07-15
Plated Steel
Interpolated Load Rating Kg/m (lbs/ft)
Model Designation +
Support Spacings m (ft.)
1.5 (5)
1.8 (6)
2.1 (7)
2.4 (8)
2.7 (9)
150/150
186.4
(127.5)
179.9
(123.0)
132.2
(90.4)
130.4
(89.1)
128.5
(87.8)
150/200
186.4
(127.5)
179.9
(123.0)
132.2
(90.4)
130.4
(89.1)
128.5
(87.8)
150/300
257.2
(175.9)
226.7
(155.0)
166.5
(113.9)
143.8
(98.3)
113.6
(77.7)
150/400
257.2
(175.9)
226.7
(155.0)
166.5
(113.9)
143.8
(98.3)
113.6
(77.7)
150/450
257.2
(175.9)
226.7
(155.0)
166.5
(113.9)
143.8
(98.3)
113.6
(77.7)
150/500
334.2
(228.5)
242.3
(165.7)
178.0
(121.7)
133.5
(91.3)
105.5
(72.1)
150/600
334.2
(228.5)
242.3
(165.7)
178.0
(121.7)
133.5
(91.3)
105.5
(72.1)
+ Includes prefix letters CF (waved) or ZF (straight) to indicate top wire
style, waved or straight, respectively. May include additional suffix
letters EZ, BL or PE to indicate finish type.
File E177464
Vol. 1
Sec. Gen.
Page 8
Issued:
Revised:
1997-05-30
2011-10-25
Stainless Steel
Interpolated Load Rating Kg/m (lbs/ft)
Model Designation +
Support Spacings m (ft.)
1.5 (5)
1.8 (6)
2.1 (7)
2.4 (8)
2.7 (9)
23.6
(15.8)
16.4
(11)
12
(8.1)
9.2
(6.2)
7.3
(4.9)
*54/100IN304
37.2
(25)
25.8
(17.3)
19
(12.7)
14.5
(9.8)
11.5
(7.7)
*54/150IN304
52
(34.9)
36.1
(24.2)
26.5
(17.8)
20.3
(13.6)
16
(10.8)
*54/200IN304
64.4
(43.2)
44.7
(30)
32.9
(22.1)
25.5
(16.9)
19.9
(13.3)
*54/300IN304
116.8
(78.4)
81.1
(54.4)
59.6
(40)
45.6
(30.6)
36
(24.2)
*54/400IN304
152.8
(102.6)
106.1
(71.2)
78
(52.3)
59.7
(40.1)
47.2
(31.7)
*54/450IN304
152.8
(102.6)
106.1
(71.2)
78
(52.3)
59.7
(40.1)
47.2
(31.7)
*54/500IN304
160.4
(107.7)
111.4
(74.8)
81.8
(54.9)
62.7
(42.1)
49.5
(33.2)
*54/600IN304
157.2
(105.5)
109.2
(73.3)
80.2
(53.8)
61.4
(41.2)
48.5
(32.6)
*54/50IN304
105/100IN304
76.4
(51.3)
53.1
(35.6)
39
(26.2)
29.8
(20)
23.6
(15.8)
105/150IN304
89.6
(60.1)
62.2
(41.8)
45.7
(30.7)
35
(23.5)
27.7
(18.6)
105/200IN304
135.6
(91)
94.2
(63.2)
69.2
(46.4)
53
(35.6)
41.9
(28.1)
105/300IN304
200.4
(134.5)
139.2
(93.4)
102.2
(68.6)
78.3
(52.5)
61.9
(41.5)
105/400IN304
232.8
(156.3)
161.7
(108.5)
118.8
(79.7)
90.9
(61)
71.9
(48.2)
105/450IN304
232.8
(156.3)
161.7
(108.5)
118.8
(79.7)
90.9
(61)
71.9
(48.2)
105/500IN304
232.8
(156.3)
161.7
(108.5)
118.8
(79.7)
90.9
(61)
71.9
(48.2)
105/600IN304
240
(161.1)
166.7
(111.9)
122.4
(82.2)
93.8
(62.9)
74.1
(49.7)
+ Includes prefix letters CF (waved) or ZF (straight) to indicate top wire
style, waved or straight, respectively. May include suffix letter IN316 in
place of IN304 to indicate stainless steel type.
File E177464
Vol. 1
Sec. Gen.
Page 9
Issued:
New:
1997-05-30
2008-07-15
Stainless Steel
Interpolated Load Rating Kg/m (lbs/ft)
Model Designation +
Support Spacings m (ft.)
1.5 (5)
1.8 (6)
2.1 (7)
2.4 (8)
2.7 (9)
150/150IN304
166.4
(111.7)
115.6
(77.6)
84.9
(57)
65
(43.6)
51.4
(34.5)
150/200IN304
174
(116.8)
120.8
(81.1)
88.8
(59.6)
68
(45.6)
53.7
(36)
150/300IN304
235.6
(158.1)
163.6
(109.8)
120.2
(80.7)
92
(61.8)
72.7
(48.8)
150/400IN304
220.8
(148.2)
153.3
(102.9)
112.7
(75.6)
86.3
(57.9)
68.1
(45.7)
150/450IN304
220.8
(148.2)
153.3
(102.9)
112.7
(75.6)
86.3
(57.9)
68.1
(45.7)
150/500IN304
204.8
(137.5)
142.2
(95.5)
104.5
(70.1)
80
(53.7)
63.2
(42.4)
150/600IN304
204.8
(137.5)
142.2
(95.5)
104.5
(70.1)
80
(53.7)
63.2
(42.4)
+ Includes prefix letters CF (waved) or ZF (straight) to indicate top wire
style, waved or straight, respectively. May include suffix letter IN316 in
place of IN304 to indicate stainless steel type.
File E177464
Project 97ME60795
Issued:
Revised:
1997-05-30
2003-05-19
REPORT
on
CABLE TRAYS
Under The
CLASSIFICATION PROGRAM
Cablofil, Inc.
Mascoutah, IL
Copyright  1997 Underwriters Laboratories Inc.
Underwriters Laboratories Inc. authorizes the above-named company to
reproduce this Report provided it is reproduced in its entirety.
File E177464
Vol. 1
Sec. 1
and Report
Page 1
Issued:
Revised:
1997-05-30
2014-03-14
DESCRIPTION
PRODUCT COVERED:
USC, CNC - Wire Mesh Cable Trays Cat. Nos. CF 54/300, /400, /450, /500,
/600; CF 105/150, /200, /300, /400, /450, /500, /600; CF 150 Series, ZF 54/300,
/400, /450, /500, /600; ZF 105/150, /200, /300, /400, /450, /500, /600; ZF 150
Series. See Table below for individual Part Numbers.
CNC - Wire Mesh Cable Trays Cat. Nos. CF 30/50, 30/100, 30/150, 30/200;
CF 54/50, 54/100, 54/150, 54/200; CF 105/100; ZF 54/50, 54/100, 54/150, 54/200,
ZF 105/100, G-Mini; CFG 50/100, CFG 50/150, CFG 50/200.
USC - Wire Mesh Cable Trays Cat. Nos. CF 30/300, 54/550, 54/750, 54/900,
105/550, 105/750, 105/900, 150/550, 150/750 ZF 30/300, 54/550, 54/750, 54/900,
105/550, 105/750, 105/900, 150/550, 150/750.
USC - Wire Mesh Cable Trays; Custom Order Sizes Cat. Nos. CF Series, ZF
Series. See Nomenclature Table for Cat. Nos. Cross-section Area must be Minimum
0.20 sq. in.
*
USC - Ventilated Cable Trays HBSP Series, HBSM Series; Unventilated Cable
Trays
GBSM Series. See Table below for individual Part Numbers.
USC - Ventilated and Unventilated Cable Tray Corner Splices Cat. Nos. ,
FTEC 50, FTEC 100; Ventilated Cable Tray Connection Cat. No. EZ Clic
USC, CNC - Wire Mesh Cable Tray Connector and Coupler Fittings Coupling
A, Coupling B, EDRN, SWK B, EDT, EZT 90, RADT 90 (may include suffixes
designating size, material, and finish), RADT 9012 (may include suffixes
designating size, material, and finish), ED275RSKIT (may include suffixes
designating size, material, and finish), ED1100RSKIT (may include suffixes
designating size, material, and finish).
USC, CNC – Trough Type Cable Trays, FT Series and VT Series.
File E177464
Tray Series +
30
54
105
Vol. 1
Sec. 1
and Report
Part Number +
30/50
30/100
30/150
30/200
30/300
54/50
54/100
54/150
54/200
54/300
54/400
54/450
54/500
54/600
105/100
105/150
105/200
105/300
105/400
105/450
105/500
105/600
Page 1-1
Tray Series +
150
Issued:
Revised:
1997-05-30
2014-03-14
Part Number +
150/150
150/200
150/250
150/300
150/400
150/450
150/500
150/600
150/900
HBSP
HBSP
HBSP
HBSP
HBSP
2/6
2/12
4/6
4/12
FT/VT
50/50
50/100
50/200
50/300
100/100
100/200
100/300
100/500
100/600
+ Includes prefix letters CF (waved) or ZF (straight) to indicate top wire
style, waved or straight, respectively. May include additional suffix letters
EZ, GC, BL or PE to indicate finish type. May include suffix IN304 or IN316
to indicate stainless steel type. See Nomenclature section for alternate
Model designations.
File E177464
Vol. 1
Sec. 1
and Report
Page 1A
Issued:
Revised:
1997-05-30
2014-03-14
ENGINEERING CONSIDERATIONS (NOT FOR UL REPRESENTATIVE USE):
General - This product is Classified as to its suitability as an
equipment grounding conductor only. They are intended for assembly in the
field for use in accordance with Article 392 and 710 of the National Electric
Code.
USC – Indicates investigation to the NFPA 70 National Electrical Code
as an equipment grounding conductor.
CNC indicates investigation to the First Edition of Canadian National
Standard CAN/CSA-C22.2 No. 126.1-09 Standard Metal Cable Tray Systems.
NOMENCLATURE:
CF
I
I.
30
II
/
50
III
EZ
IV
Rail type
CF or ZF – Steel wire stringers, CF (waved) or ZF (straight) to
indicate top wire style, waved or straight, respectively.
VT, HBSP, & HSBM – Steel perforated trough
FT & GBSM – Solid trough
ZF, HSBM, GBSM are alternate designations for CF, HBSP, VT, FT,
respectively.
CFG – Identical to CF series except trough is in a G shape instead of a
U shape as shown in FIG. 5.
II.
Rail height
CF or ZF Series
30 – 1.18 in.
54 – 2.12 in.
105 – 4.13 in.
150 – 5.9 in.
CFG Series
50 – 1.97 in.
Alternate min. rail height for Custom Order Sizes: 38mm (1.5 in.) see
alternate width note below.
HBSP, HSBM, FT or GBSM Series
2 - 2 in.
4 – 4 in.
File E177464
Vol. 1
Sec. 1
and Report
Page 1B
Issued:
Revised:
1997-05-30
2013-09-13
NOMENCLATURE: (cont.)
III.
Width
CF or
50 –
100 –
150 –
200 –
250 –
300 –
400 –
450 –
500 –
550 –
600 –
750 –
900 –
ZF Series
1.97 in.
3.94 in.
5.9 in.
7.87 in.
9.84 in.
11.81 in.
15.75 in.
17.72 in.
19.69 in.
21.65 in.
23.62 in.
29.53 in.
35.43 in.
Alternate min. widths for Custom Order Sizes is 50 mm (2.0 in.).
Alternate width equals balance of numeric portion of the grid size identifier
listed on Ills. 18 and 19 after subtracting alternate rail height times two,
all in millimeters. Example of an alternate EZ finish size tray made from a
P400 BS grid size with an alternate depth (rail height) of 38 mm (1.5 in.):
P400 BS grid width is 400 mm (15.75 in.) minus 2 x 38 mm (1.5 in.) = 324 mm
(12.75 in.) width creates a Cat. No. of CF38/324EZ
HBSP, HSBM, VT, FT or GBSM Series
6 – 6 in.
12 – 12 in.
IV.
Finish Code
EZ – Electro Zinc
GC - Hot-dipped galvanized after fabrication
BL – Black Painted
PE – Custom Painted
IN304 - Stainless Steel
IN316 - Stainless Steel
File E177464
Vol. 1
Sec. 1
and Report
Page 2
Issued:
Revised:
1997-05-30
2014-03-14
CONSTRUCTION DETAILS:
Metal dimensions specified as "nominal diameter" or "nominal thickness"
may have an unlimited plus tolerance and a maximum of 10% minus tolerance.
Details of construction are given in the following illustrations and
figures and their related indices. These descriptions do not cover the
complete product. They are limited to describing the grounding path through
these trays with respect to cross-sectional area.
Painting – The cable trays may be powder coated painted. Maximum paint
process drying temperatures is 420 deg F (215 deg C).
The following conductive foiled tapes and mask tapes are required when
cable trays are powder coated painted: Chomerics Foiled Tape Type Cho-Mask
II or 3M Type 1183 foiled tape with Mighty Hook Type GTM mask tape.
Material - The cable trays are formed of materials as noted in the
finish code of the product nomenclature, as specified in page 1B of this
report unless specified otherwise in description of the specific part.
Marking - Classified Company’s name or trademark appear on the cable
tray. Tray is marked on the outer surface with the minimum total crosssectional area of the grounding members, “Mimimum Area_____SQ.IN.” The area
markings are below and shall conform to one of the following values.
Minimum Area (sq in.)
Steel Cable Trays
0.20
0.40
0.70
1.00
1.50
Each splice plate is marked with the Classified Company’s name or
trademark.
Load Ratings – Refer to Sec. Gen. and/or the following table for load ratings
of cable trays.
Cat. No.
FT/VT 50 300
FT/VT 100 300
FT/VT 100 600
Span
10
10
10
Load Rating (lbs./ft.)
16
44
50
File E177464
Vol. 1
Sec. 1
and Report
Page 2A
Issued:
Revised:
1997-05-30
2013-05-30
The cross sectional area for the cable trays is as follows:
Tray
Series
30
50
54
105
150
G-Mini
+ -
*
Part
Number
30/50
30/100
30/150
30/200
30/300
50/100
50/150
50/200
54/50
54/100
54/150
54/200
54/300
54/400
54/450
54/500
54/550
54/600
54/750
54/900
105/100
105/150
105/200
105/300
105/400
105/450
105/500
105/550
105/600
105/750
105/900
150/150
150/200
150/250
150/300
150/400
150/450
150/500
150/550
150/600
150/750
150/900
-
Cross-Sectional Area,
sq. in.
0.0370
0.0925
0.1109
0.121
0.2120
0.1109
0.1396
0.1884
0.0925
0.1109
0.1396
0.1846
0.2948
0.3692
0.3927
0.4163
0.429
0.4897
0.527
0.601
0.1846
0.2763
0.2948
0.3692
0.4163
0.4661
0.4897
0.508
0.5368
0.607
0.681
0.3463
0.3692
0.3927
0.4163
0.4897
0.5132
0.5368
0.587
0.8470
0.760
0.8818
0.055
Area, sq. in., steel cable trays, NEC
Table 392.7(B)
N/A, CNC Only
N/A, CNC Only
N/A, CNC Only
N/A, CNC Only
0.20
N/A, CNC Only
N/A, CNC Only
N/A, CNC Only
N/A, CNC Only
N/A, CNC Only
N/A, CNC Only
N/A, CNC Only
0.20
0.20
0.20
0.40
0.40
0.40
0.40
0.40
N/A, CNC Only
0.20
0.20
0.20
0.40
0.40
0.40
0.40
0.40
0.40
0.40
0.20
0.20
0.20
0.40
0.40
0.40
0.40
0.40
0.70
0.70
0.70
N/A, CNC Only
Includes prefix letters CF (waved) or ZF (straight) to indicate top
wire style, waved or straight, respectively. May include additional
suffix letters EZ, GC, BL or PE to indicate finish type. May include
suffix IN304 or IN316 to indicate stainless steel type.
File E177464
Vol. 1
Sec. 1
and Report
Page 2B
Issued:
1997-05-30
The UL Representative shall determine the cross sectional area and
verify the correct markings are applied for any Part No. not specified. For
Custom Order Sizes, the cross sectional area and required marking shall be
identical to the area and marking for the standard tray part number made from
the same grid size. Refer to ILL. 18 and 19 for the tray part number and grid
size correlation. In example, a custom order size CF38/324EZ and standard
tray Part No. CF54/300 are both made from the P400 BS grid size and therefore
both have a 0.2695 sq. in. Cross-Sectional Area and require a “Minimum
Area 0.20 SQ.IN.” marking.
File E177464
Vol. 1
Sec. 1
and Report
Page 3
Issued:
Revised:
1997-05-30
2013-05-30
CABLE TRAY TYPE CF FIG. 1 (M97-05300)
General – The general design, shape and arrangement shall be as
illustrated except where variations are specifically described. Formed of
carbon steel. Unless otherwise specified, wires on top of tray sides measure
0.23 in. diameter.
1.
CF 30/50 – Overall 30 mm (1.18 in.) deep, 50 mm (1.97 in.) wide,
3000 mm (118.11 in.) in length. See ILL. 8 for further details.
2.
CF 30/100 – Overall 30 mm (1.18 in.) deep, 100 mm (3.94 in.) wide,
3000 mm (118.11 in.) in length. See ILL. 8 for further details.
3.
CF 30/150 – Overall 30 mm (1.18 in.) deep, 150 mm (5.9 in.) wide,
3000 mm (118.11 in.) in length. See ILL. 8 for further details.
4.
CF 30/200 – Overall 30 mm (1.18 in.) deep, 200 mm (7.87 in.) wide,
3000 mm (118.11 in.) in length. See ILL. 8 for further details.
5.
CF 30/300 – Overall 30 mm (1.18 in.) deep, 300 mm (11.81 in.) wide,
3000 mm (118.11 in.) in length. See ILL. 8 for further details.
6.
CF 54/50 – Overall 54 mm (2.12 in.) deep, 50 mm (1.97 in.) wide,
3000 mm (118.11 in.) in length. See ILL. 9, 18 and 19 for further
details.
7.
CF 54/100 – Overall 54 mm (2.12 in.) deep, 100 mm (3.94 in.) wide,
3000 mm (118.11 in.) in length. See ILL. 9, 18 and 19 for further
details.
8.
CF 54/150 – Overall 54 mm (2.12 in.) deep, 150 mm (5.9 in.) wide,
3000 mm (118.11 in.) in length. See ILL. 9, 18 and 19 for further
details.
9.
CF 54/200 – Overall 54 mm (2.12 in.) deep, 200 mm (7.87 in.) wide,
3000 mm (118.11 in.) in length. See ILL. 9, 18 and 19 for further
details.
10.
CF 54/300 – Overall 54 mm (2.12 in.) deep, 300 mm (11.81 in.) wide,
3000 mm (118.11 in.) in length. See ILL. 9, 18 and 19 for further
details.
11.
CF 54/400 – Overall 54 mm (2.12 in.) deep, 400 mm (15.75 in.) wide,
3000 mm (118.11 in.) in length. See ILL. 9, 18 and 19 for further
details.
12.
CF 54/450 – Overall 54 mm (2.12 in.) deep, 450 mm (17.72 in.) wide,
3000 mm (118.11 in.) in length. See ILL. 9, 18 and 19 for further
details.
13.
CF 54/500 – Overall 54 mm (2.12 in.) deep, 500 mm (19.69 in.) wide,
3000 mm (118.11 in.) in length. See ILL. 9, 18 and 19 for further
details.
14.
CF 54/550 – Overall 54 mm (2.12 in.) deep, 550 mm (21.65 in.) wide,
3000 mm (118.11 in.) in length. Constructed with four 5.5mm side rungs
and eleven 3.9mm bottom rungs.
*
File E177464
Vol. 1
Sec. 1
and Report
Page 3A
Issued:
New:
1997-05-30
2013-05-30
15.
CF 54/600 – Overall 54 mm (2.12 in.) deep, 600 mm (23.62 in.) wide,
3000 mm (118.11 in.) in length. See ILL. 9, 18 and 19 for further
details.
16.
CF 54/750 – Overall 54 mm (2.12 in.) deep, 550 mm (29.53 in.) wide,
3000 mm (118.11 in.) in length. Constructed with four 5.5mm side rungs
and fifteen 3.9mm bottom rungs.
17.
CF 54/900 – Overall 54 mm (2.12 in.) deep, 550 mm (35.43 in.) wide,
3000 mm (118.11 in.) in length. Constructed with four 5.5mm side rungs
and eighteen 3.9mm bottom rungs.
File E177464
Vol. 1
Sec. 1
and Report
Page 4
Issued:
Revised:
1997-05-30
2013-05-30
*18.
CF 105/100 – Overall 105 mm (4.13 in.) deep, 100 mm (3.94 in.) wide,
3000 mm (118.11 in.) in length. See ILL. 10, 18 and 19 for further
details.
*19.
CF 105/150 – Overall 105 mm (4.13 in.) deep, 150 mm (5.9 in.) wide,
3000 mm (118.11 in.) in length. See ILL. 10, 18 and 19 for further
details.
*20.
CF 105/200 – Overall 105 mm (4.13 in.) deep, 200 mm (7.87 in.) wide,
3000 mm (118.11 in.) in length. See ILL. 10, 18 and 19 for further
details.
*21.
CF 105/300 – Overall 105 mm (4.13 in.) deep, 300 mm (11.81 in.) wide,
3000 mm (118.11 in.) in length. See ILL. 10, 18 and 19 for further
details.
*22.
CF 105/400 – Overall 105 mm (4.13 in.) deep, 400 mm (15.75 in.) wide,
3000 mm (118.11 in.) in length. See ILL. 18 and 19 for further details.
*23.
CF 105/450 – Overall 105 mm (4.13 in.) deep, 450 mm (17.72 in.) wide,
3000 mm (118.11 in.) in length. See ILL. 10, 18 and 19 for further
details.
*24.
CF 105/500 – Overall 105 mm (4.13 in.) deep, 500 mm (19.69 in.) wide,
3000 mm (118.11 in.) in length. See ILL. 10, 18 and 19 for further
details.
25.
CF 105/550 – Overall 105 mm (4.13 in.) deep, 550 mm (21.65 in.) wide,
3000 mm (118.11 in.) in length. Constructed with six 5.5mm side rungs
and eleven 3.9mm bottom rungs.
*26.
CF 105/600 – Overall 105 mm (4.13 in.) deep, 600 mm (23.62 in.) wide,
3000 mm (118.11 in.) in length. See ILL. 10, 18 and 19 for further
details.
27.
CF 105/750 – Overall 105 mm (4.13 in.) deep, 550 mm (29.53 in.) wide,
3000 mm (118.11 in.) in length. Constructed with six 5.5mm side rungs
and fifteen 3.9mm bottom rungs.
28.
CF 105/900 – Overall 105 mm (4.13 in.) deep, 550 mm (35.43 in.) wide,
3000 mm (118.11 in.) in length. Constructed with six 5.5mm side rungs
and eighteen 3.9mm bottom rungs.
*29.
CF 150/150 – Overall 150 mm (5.9 in.) deep, 150 mm (5.9 in.) wide,
3000 mm (118.11 in.) in length. See ILL. 18 and 19 for further details.
*30.
CF 150/200 – Overall 150 mm (5.9 in.) deep, 200 mm (7.87 in.) wide,
3000 mm (118.11 in.) in length. See ILL. 18 and 19 for further details.
*31.
CF 150/250 – Overall 150 mm (5.9 in.) deep, 250 mm (9.84 in.) wide,
3000 mm (118.11 in.) in length.
*
File E177464
Vol. 1
Sec. 1
and Report
Page 4-1
Issued:
New:
1997-05-30
2013-05-30
32.
CF 150/300 – Overall 150 mm (5.9 in.) deep, 300 mm (11.81 in.) wide,
3000 mm (118.11 in.) in length. See ILL. 11, 18 and 19 for further
details.
33.
CF 150/400 – Overall 150 mm (5.9 in.) deep, 400 mm (15.75 in.) wide,
3000 mm (118.11 in.) in length. See ILL. 18 and 19 for further details.
34.
CF 150/450 – Overall 150 mm (5.9 in.) deep, 450 mm (17.72 in.) wide,
3000 mm (118.11 in.) in length. See ILL. 11, 18 and 19 for further
details.
File E177464
Vol. 1
Sec. 1
and Report
Page 4A
Issued:
Revised:
1997-05-30
2013-05-30
*35.
CF 150/500 – Overall 150 mm (5.9 in.) deep, 500 mm (19.69 in.) wide,
3000 mm (118.11 in.) in length. See ILL. 11, 18 and 19 for further
details.
36.
CF 150/550 – Overall 150 mm (5.9 in.) deep, 550 mm (21.65 in.) wide,
3000 mm (118.11 in.) in length. Constructed with eight 5.5mm side rungs
and eleven 3.9mm bottom rungs.
*37.
CF 150/600 – Overall 150 mm (5.9 in.) deep, 600 mm (23.62 in.) wide,
3000 mm (118.11 in.) in length. See ILL. 11 for further details.
38.
CF 150/750 – Overall 150 mm (5.9 in.) deep, 550 mm (29.53 in.) wide,
3000 mm (118.11 in.) in length. Constructed with eight 5.5mm side rungs
and fifteen 3.9mm bottom rungs.
*39.
CF 150/900 – Overall 150 mm (5.9 in.) deep, 900 mm (35.43 in.) wide,
3000 mm (118.11 in.) in length.
File E177464
Vol. 1
Sec. 1
and Report
Page 4B
Issued:
Revised:
1997-05-30
2014-03-14
CONNECTORS AND COUPLER CAT. NOS. COUPLING A, COUPLING B,
EDRN, SWK B, EDT, EZT 90, RADT 90, RADT 9012, ED275RSKIT, ED1100RSKIT
General – The general design, shape and arrangement shall be as
illustrated except where variations are specifically described. Formed of
carbon steel. Refer to ILLS. 3–7 and 12-13 for details on fittings for
securing two lengths of cable trays. The Connectors and coupler fittings
noted below are intended for use with all CF Series and ZF Series Wire Mesh
Cable Trays.
1.
Coupling A - Consists of one EZBN 1/4 - 20 plated steel nut and bolt,
one CE30 Splice Washer and one CE25 Washer. Refer to ILLS. 3,4,6 & 7.
CE25 Washers are plated steel nominal thickness 0.098 in. (2.4 mm) or
Stainless Steel nominal thickness 0.078 in. (2.0 mm)
CE30 Splice Washers are plated steel nominal thickness 0.098 in.
(2.4 mm) or Stainless Steel nominal thickness 0.078 in. (2.0 mm)
2.
Coupling B - Consists of one EZBN 1/4 - 20 plated steel nut and bolt,
one ED275 Universal Splice bar and one CE25 Washer. Refer to ILLS. 3,
4, 5 and 6.
3.
EDRN – Consists of one splice bar, nominal plated steel thickness,
0.050 in. Refer to ILL. 12.
4.
SWK B - Consists of one CE25 Washer and bolt wedged together and one
CE30 Splice Washer and nut swedged together. Refer to ILLS. 4, 7 and
13.
5.
EDT - Consists of two EDT splice plates, two EZ BN 1/4 - 20 plated
steel nuts and bolts, two CE25 Washers. When used with trays from
4.0 in. (100 mm) up to 8 in. (800 mm) wide, the Kit No. EDT also
includes one SWK nut and bolt assembly. When used with trays more than
8 in. (800 mm) to a maximum of 24 in. (600 mm), the Kit No. EDT
includes two SWK nut and bolt assemblies. See ILL. 15 for details.
Also includes GC Hot-dipped galvanized after fabrication finish.
6.
EZT 90 - Consists of two 90 Degree braces plated steel nominal 0.74 x
0.157 in. (18.8 x 4.0 mm) thick, Stainless Steel nominal 0.74 x
0.137 in. (18.8 x 3.5 mm) thick, ten EZBN 1/4 - 20 plated steel bolts
and nuts, ten CE 25 Washer and four CE 40 plates. See ILL. 16 for
details.
CE40 plates are plated steel nominal 1.97 x 2.25 x 0.078
57.2 x 2.0 mm).
7.
in. (50 x
RAD T 90 - Consists of two radius splices plated steel nominal 0.157 x
0.708 in. (4.0 x 18.0 mm), ten EZ BN 1/4 - 20 plated steel bolts and
nuts, eight CE 25 Washers and two minimum CE 40 plates. See ILL. 17 for
some details, but correct count of components is as noted above.
File E177464
Vol. 1
Sec. 1
and Report
Page 4C
Issued:
Revised:
1997-05-30
2011-10-25
8.
RAD T 9012 – Identical to Cat. No. RAD T 90, except the radius is 12
inches instead of 5 inches. See ILL. 20 for details.
9.
ED275RSKIT Reduction Kit – See ILL. 21 for details including materials
as detailed on pg 1B.
10.
ED1100RSKIT Reduction Kit - See ILL. 21 for details including materials
as detailed on pg 1B.
File E177464
Vol. 1
Sec. 1
and Report
Page 5
Issued:
Revised:
1997-05-30
2013-09-13
CABLE TRAY TYPE HBSP & VT FIG. 2
General - Formed of perforated galvanized steel. Refer to Ill. 14 for
details on fittings for securing two lengths of cable trays.
1.
HBSP 2/6 - Overall 2 in high, 6 in wide.
securing two lengths.
Provided with fittings for
2.
HBSP 2/12 - Overall 2 in high, 12 in wide.
securing two lengths.
3.
HBSP 4/6 - Overall 4 in high, 6 in wide.
securing two lengths.
4.
HBSP 4/12 - Overall 4 in high, 12 in wide.
securing two lengths.
5.
FT 50/50 - Overall 2 in high, 2 in wide.
securing two lengths.
6.
FT 50/100 - Overall 2 in high, 4 in wide.
securing two lengths.
Provided with fittings for
7.
FT 50/200 - Overall 2 in high, 8 in wide.
securing two lengths.
Provided with fittings for
8.
FT 50/300 - Overall 2 in high, 12 in wide.
securing two lengths.
Provided with fittings for
9.
FT 100/100 - Overall 4 in high, 4 in wide.
securing two lengths.
Provided with fittings for
10.
FT 100/200 - Overall 4 in high, 8 in wide.
securing two lengths.
Provided with fittings for
11.
FT 100/300 - Overall 4 in high, 12 in wide.
securing two lengths.
Provided with fittings for
12.
FT 100/500 - Overall 4 in high, 20 in wide.
securing two lengths.
Provided with fittings for
13.
FT 100/600 - Overall 4 in high, 24 in wide.
securing two lengths.
Provided with fittings for
Provided with fittings for
Provided with fittings for
Provided with fittings for
Provided with fittings for
File E177464
Vol. 1
Sec. 1
and Report
Page 6
Issued:
Revised:
1997-05-30
2012-07-24
CABLE TRAY TYPE FT FIG. 3
General - Formed of galvanized steel. Refer to ILL. 14 for details on
fittings for securing two lengths of cable trays.
1.
FT 50/50 - Overall 2 in high, 2 in wide.
securing two lengths.
2.
FT 50/100 - Overall 2 in high, 4 in wide.
securing two lengths.
Provided with fittings for
3.
FT 50/200 - Overall 2 in high, 8 in wide.
securing two lengths.
Provided with fittings for
4.
FT 50/300 - Overall 2 in high, 12 in wide.
securing two lengths.
Provided with fittings for
5.
FT 100/100 - Overall 4 in high, 4 in wide.
securing two lengths.
Provided with fittings for
6.
FT 100/200 - Overall 4 in high, 8 in wide.
securing two lengths.
Provided with fittings for
7.
FT 100/300 - Overall 4 in high, 12 in wide.
securing two lengths.
Provided with fittings for
8.
FT 100/500 - Overall 4 in high, 20 in wide.
securing two lengths.
Provided with fittings for
9.
FT 100/600 - Overall 4 in high, 24 in wide.
securing two lengths.
Provided with fittings for
*
Provided with fittings for
File E177464
Vol. 1
Sec. 1
and Report
Page 7
Issued:
Revised:
1997-05-30
2012-07-24
CONNECTIONS AND CORNER SPLICES CAT. NOS. EZ CLIC, FTEC 50, FTEC 100
General – The general design, shape and arrangement shall be as
illustrated except where variations are specifically described. Formed of
carbon steel. Refer to ILL. 14 for details on connections and corner splices
for securing two lengths of cable trays. The corner splices Cat. Nos. FTEC 50
and FTEC 100 are intended for use with all Cat. Nos. HBSP Series, HSBM
Series, GBS Series, GBSM Series Cable Trays. The connection Cat. Nos. EZ Clic
is intended for use with all Cat. Nos. HBSP Series, HSBM Series Cable Trays.
Connection Cat. No. EZ Clic - Plated steel, nominal thickness 0.031 in.
Refer to ILL. 14.
Corner Splice Cat. No. FTEC 50 - Plated steel, nominal thickness 0. 060
in. Provided with PH 1/4 - 20 bolts. Refer to ILL. 14.
Corner Splice Cat. No. FTEC 100 - Plated steel, nominal thickness 0.
060 in. Provided with PH 1/4 - 20 bolts. Refer to ILL. 14.
File E177464
Vol. 1
Sec. 1
and Report
CABLE TRAY TYPE
Page 8
Issued:
New:
1997-05-30
2011-10-25
G-Mini FIG. 4
*
General – The general design, shape and arrangement shall be as
illustrated except where variations are specifically described. Formed of
carbon steel. Wires on top of tray sides measure 0.15 in. diameter, other
wires measure 0.13 in. diameter.
1.
G-Mini – Overall 50 mm (1.97 in.) deep, 50 mm (1.97 in.) wide, 3000 mm
(118.11 in.) in length.
File E177464
Vol. 1
Sec. 1
and Report
Page 9
Issued:
New:
1997-05-30
2011-10-25
CABLE TRAY TYPE CFG FIG. 5
*
General – The general design, shape and arrangement shall be as
illustrated except where variations are specifically described. Formed of
carbon steel. Unless otherwise specified, wires on top of tray sides measure
0.23 in. diameter. Wires of tray measure 0.18 in. diameter.
1.
CFG 50/100 – Overall 50 mm (1.97 in.) deep, 100 mm (3.94 in.) wide,
3000 mm (118.11 in.) in length.
1.
CFG 50/150 – Overall 50 mm (1.97 in.) deep, 150 mm (5.91 in.) wide,
3000 mm (118.11 in.) in length.
1.
CFG 50/200 – Overall 50 mm (1.97 in.) deep, 200 mm (7.88 in.) wide,
3000 mm (118.11 in.) in length.