COOPER LIGHTING - SURE-LITES ®
DESCRIPTION
Family of Surface Mounted Die-cast Aluminum Exits combine strength,
durability and aesthetics. The pleasing lines and the range of
architecturally compatible finishes add a new dimension to any design.
Type
Catalog #
Project
Date
Comments
Prepared by
S P E C I F I C AT I O N F E AT U R E S
E l e c t ro n i c
Code Compliance
- Dual Voltage Input 120/277
VAC, 60 Hz
- Line-latching
- Solid-state Voltage Limited
Charger
- Solid-state Switching
- Low-Voltage Disconnect
- Brownout Circuit
- Overload/Short-Circuit
Protection
- Test Switch/Power
Indicator Light
- UL 924 Listed
- Life Safety NFPA 101v
- NEC/OSHA
- Most State and Local Codes
- Suitable for Floor Proximity
Installation
H o u s i n g C o n s t ru c t i o n
- Die cast aluminum housing with
hinged face plate
- Die cast canopy for ceiling
or end mounting included (for
mounting convenience only; no
electrical components in canopy)
- Downlight not available on CAX
Series Exits with LED lamps
- Universal pattern knockouts on
rear of single face housing for
direct mounting to junction box
- Choice of four finishes
- NFPA 101 compliant knockout
chevrons allow quick conversion
to directional signs
L a m p Da t a
- Screw-in LED lamps: Two 1W
long-life T6 1/2 intermediate
base lamps
- LED lamp panel provides
uniform light output
- LED lamps have estimated life
of 25 years or more
- Extremely economical lamp
operation
- Optional Low Power
Consumption version
Miscellaneous
- Single face exits may be
utilized with a Remote
Powered PX-LED Exit
Wa rra n t y
- Exit: 1-year
- Battery: 15-year pro-rated
CAX
SERIES
[108mm]
4 1/4"
6" [152mm]
D I E - C AST A L U M I N U M
1 1/4" [32mm]
S U R FAC E M O U NT
S E L F P OW E R E D E M E R G E N C Y
LED LAMPS
- Red or green lettering only
8 1/4"
(210mm)
13 5/8" [346mm]
EXIT LIGHTING
2 1/4"
[57mm]
ENERGY
D ATA
Maximum power
ORDERING INFORMATION
consumption
under all charge
conditions:
Series
CAX7=Aluminum Exit
Surface Mount
Self-Powered,
LED
65=Tamperproof Screws
85=Vandal Shield
90=DC Only Fire Alarm
Interface
Face
Options
1=Single
95=AC Only Fire Alarm 1
Interface
2=Double
Battery
70=Nickel
Cadmium
Notes: 1
Factory Options
00=No Options
AC Only Fire Alarm Interface Option available on incandescent exits
only.
Single Face,
Self-Powered
Self-Powered
Input Power:
Input Power:
120V = 5.0W
120V = 4.9W
277V = 4.8W
277V = 4.8W
Accessories
WGS11=Ceiling or End Mount Wire Guard
(Ceiling or End Mount Only)
Input Current (Max.):
Input Current (Max.):
120V = .05
120V = .06
W=White
B=Black
VS1=Polycarbonate Vandal Shield
277V = .03
277V = .03
Pendant Kit
Power Factor:
Power Factor:
CAX18PKBK=18" Pendant Kit, Black
120V = .78
120V = .68
CAX18PKWH=18" Pendant Kit, White
277V = .69
277V = .58
Voltage
__=120 / 277V
G=Green
Green Letters,
Single Face,
Housing
Finish
__=Brushed
Aluminum Face
w/Black
Housing
BZ=Bronze
Letter
Colors
R=Red
Red Letters,
Options
SD=Self
Diagnostics
2
Protective Housing
WG10=Surface Mount Wire Guard (Wall
Mount Only)
CAX18PKHTBK=18" Hang True Pendant Kit,
Black
Red Letters,
Green Letters,
CAX18PKHTWH=18" Hang True Pendant
Kit, White
Double Face,
Double Face,
Self-Powered
Self-Powered
0590-12SP=Tamperproof Screwdriver Bit
Input Power:
Input Power:
VRSD=Vandal Resistant Screwdriver
120V = 6.2W
120V = 6.9W
277V = 5.8W
277V = 7.0W
2
Order separately.
Input Current (Max.):
Input Current (Max.):
*
AC compact fluorescent CAX Series Exits cannot be converted to
self-powered emergency.
120V = .06
120V = .07
277V = .03
277V = .03
Power Factor:
Power Factor:
120V = .84
120V = .82
277V = .76
277V = .82
Specifications and dimensions subject to change without notice.
Consult your representative for additional options and finishes.
ADX041045 pc
2011-07-06 16:10:45
CAX SERIES
T E C H N I C A L DATA
Lamps
The Pinnacle Family is offered with energy
saving LED lamps that offer extremely long-life
with very low input wattage. LED lamps are
available in either red or green. LED lamps have
an estimated life of 25 years or more
eliminating the need for any lamp maintenance
under normal conditions.
Housing
Die cast aluminum with Brushed Aluminum face
and black trim standard. Optional finishes
include White, Black and Bronze. NFPA 101
compliant knockout chevrons are molded in for
easy conversion to a directional sign. Universal
pattern knockouts are molded into back plate of
single face housing for direct mounting to
junction box.
C a n o py
Die cast aluminum alloy canopy included for
universal mounting. Canopy is included for
mounting convenience only, there are no
electrical components within canopy.
E l e c t ro n i c s
Dual voltage input 120/277 VAC, 60Hz is
standard. Nickel Cadmium battery is standard
on self powered exits. All batteries and electrical
components are enclosed within the exit
housing, preserving the low profile appearance
even on self powered exits.
L i n e - L a t ch e d
Sure-Lites’ line-latched electronic circuitry
makes installation easy and economical. A labor
efficient AC-activated load switch prevents the
lamps from turning on during installation to a
nonenergized AC circuit. Linelatching eliminates
the need for a contractor’s return to a job site to
connect the batteries when the building’s main
power is permanently turned on.
S o l i d - S t a te C h a rge r
Supplied with a 120/277 VAC, voltage regulated
solid-state charger. Immediately upon
restoration of AC current after a power failure,
the charger provides a high charge rate. The
charge circuit reacts to the condition of the
battery and alters the rate of charge in order to
maintain peak battery capacity and maximize
battery life. Solid-state construction recharges
the battery following a power failure in
accordance with UL 924.
O ve rl o a d a n d S h o rt - C i rc u i t
P ro te c t i o n
The solid-state overload monitoring device in
the DC circuit disconnects the lamp load from
the battery should excessive wattage demands
be made and automatically resets when the
overload or short circuit is removed. This
overload current protective feature eliminates
the need for fuses or circuit breakers for the DC
load.
B row n o u t C i rc u i t
The brownout circuit in Sure-Lites’ exits
monitors the flow of AC current to the exit and
activates the emergency lighting system when a
predetermined reduction of AC power occurs.
This dip in voltage will cause most ballasted
fixtures to extinguish causing loss of normal
lighting even though a total power failure has
not occurred.
Te s t Sw i t ch / Powe r I n d i c a to r
Light
Conveniently located Test Switch allows for
manual verification of proper operation of the
transfer circuit and emergency lamps. The
Power Indicator Light provides visual assurance
that the AC power is on.
S e a l e d N i cke l
C a d m i u m B a tte r y
Sure-Lites sealed nickel cadmium batteries are
maintenance-free with a life expectancy of 15
years. The sealed rechargeable nickel cadmium
battery offers high discharge rates and stable
performance over a wide range of
temperatures. The specially designed resealable
vent automatically controls cell pressure,
assuring safety and reliability. This battery is
best suited for harsh ambient temperatures
because the electrolyte is not active in the
electrochemical process
Wa rra n t y
All Sure-Lites’ units are backed by a firm oneyear warranty against defect in material and
workmanship. Rechargeable, long-life, sealed
nickel cadmium batteries carry a fifteen-year,
pro-rated warranty.
Specifications and dimensions subject to change without notice.
Sure-Lites • Customer First Center • 1121 Highway 74 South • Peachtree City, GA 30269 • TEL 770.486.4800 • FAX 770.486.4801
ADX041045 pc
2011-07-06 16:10:45
2011-07-07 14:07:48