kothaw
Final Program
AMDP 2014
7th International Conference on Advanced Materials Development & Performance
Korea Maritime and Ocean University, KOREA,
July 17th~20th, 2014
Organized by Korea Maritime and Ocean University, Korea
The University of Tokushima, Japan
The University of Auckland, New Zealand
Xi’an Jiaotong University, China
Sponsored by Korea Maritime and Ocean University
Local Government of Busan Metropolitan City
Busan Tourism Organization, Korea
Research Institute of Industrial Technology, Korea Maritime and Ocean University, Korea
Research Institute of Maritime Industry, Korea Maritime and Ocean University, Korea
Website
http://amdp2014.org
0
Program and Abstract Book for 7th International Conference AMDP 2014
7th International Conference on Advanced
Materials Development and Performance
(AMDP2014)
Conference Program
1
Program and Abstract Book for 7th International Conference AMDP 2014
Foreword
Welcoming Message from Conference Chair: Professor Yun-Hae KIM
On behalf of the Organizing Committee AMDP 2014, it is my great pleasure to warmly welcome you
to participate in the Seventh International Conference on Advanced Materials Development and
Performance (AMDP 2014) in Busan, Korea from 17th to 20th July, 2014. Over the past 17 years,
AMDP has grown to be one of the major international conferences in advanced materials development.
The conference will continue its tradition of focusing on “advanced materials, performance, and their
application.” The AMDP2014 is a grand meeting for experts of all advanced material fields to exchange
their professional academic viewpoints and achievements, learn from each other and promote
common progress. I sincerely hope that this meeting can provide an interdisciplinary platform for
researchers from all over the world to convene in Korea and to present their latest scientific
discoveries. Your participation and contributions to this conference will make this an exciting and
memorable event.
I would like to express my sincere thanks to all members of International Technical Committee and
Local Organizing Committee. It is owing to their hard work, we are able to meet in this beautiful city to
share experiences and explore the new development of Advanced Materials.
The AMDP2014 has received wide attention from researchers all over the world. About 400 papers
from Korea, Japan, China, India, Taiwan, Singapore, Pakistan, Iran, New Zealand, etc., are submitted in
this conference. The AMDP2014 covers not only the Advanced Material fields but also their many
applications, especially to marine fields.
On behalf of the committee, I would like to extend my deep appreciation to all authors for their great
contributions to this AMDP2014 conference and to the reviewers.
Finally, I do hope that you will find this conference both enjoyable and valuable, and also enjoy the
cultural and natural beauty of Busan, and Korea.
Chairman: AMDP 2014
2
Program and Abstract Book for 7th International Conference AMDP 2014
Welcoming Message from President of KMOU: President Han-Il PARK
I warmly welcome you all to the 7th International Conference
on Advanced Materials
Development and Performance (AMDP2014). I would like to express my appreciation to the
representatives of AMDP2014 and the presenters, who have come from Korea, Japan, China,
New Zealand, Singapore, Taiwan, India, Pakistan, U.S.A., etc. I am really privileged to have you
as guests at Korea Maritime and Ocean University. My special welcome also goes to professor
Hong-Kyu LEE, Jitai NIU, Hyoung-Jin CHO, Hajime SAKAKITA, Ri-ichi MURAKAMI, M. A. MORE,
Yun-Hae KIM, who are going to deliver plenary speeches for the conference.
Now, our university is making a new leap forward to the last frontier in the ocean and the world.
That is why our university recently changed its name from Korea Maritime University to Korea
Maritime and Ocean University. I truly believe that the socio-scientific and human cultural approach to
the ocean will be the next big trend. In that sense, I really appreciate all of your endeavors to research
and exchange the best ideas regarding the advanced materials.
Taking this opportunity, I wish all of you great success including a long friendship and
cooperation among the research institutions as well as fellow scholars.
Thank you very much for your attention.
17 July, 2014
President of KMOU
3
fruitful
Program and Abstract Book for 7th International Conference AMDP 2014
About AMDP
Since the 1st International Conference on Advanced Materials Development
& Performance, AMDP, was founded in Auckland, 1997, AMDP has 17 years
history, and has been organized by five Universities located in East Asia and
Australasia. The key aim of the conference is to provide an opportunity for the
delegates to meet, interact and exchange new ideas on advanced materials
development, performance and their applications. This conference covers a
wide range of topics related to materials science and engineering.
We are pleased to inform you that AMDP2014 will be held in Busan,
KOREA on July 17th-20th, 2014. AMDP2014 is planning to include numerous
sessions on the development and performance of advanced materials. AMDP2014 is also planning feature
talks by distinguished speakers presenting the latest advances in the field, and contributed papers will also
be solicited for poster presentations. Although the topics covered will include highly detailed discussions in
many fields, it will also provide an excellent opportunity to learn about the latest cutting edge research of
current interests
The 1st AMDP1997 was held in Auckland, New Zealand. The chairmen were Prof W. G. Ferguson and W.
Gao(The Univ of Auckland).
The 2nd AMDP1999 was held in Tokushima, Japan. The chairmen were Prof R. Murakami and I.
Nakabayashi (The Univ of Tokushima).
The 3rd AMDP2002 was held in Daegu, Korea. The chairman was Prof C.M. Suh (Kyungpook Nat’l Univ).
The 4th AMDP2005 was held in Auckland, New Zealand. The chairmen were Prof W.G. Ferguson and W.
Gao (The Univ of Auckland).
The 5th AMDP2008 was held in Beijing, China. The chairman was Professor H. Xu (Prof of Beihang
Univ).
The 6th AMDP2011 was held in Tokushima, Japan. The chairman was Prof R. Murakami (The Univ of
Tokushima).
The 7th AMDP2014 will be held in Busan, Korea. The chairman is Prof Y.H. Kim (Korea Maritime and
Ocean Univ).
Secretary General : AMDP 2014
4
Program and Abstract Book for 7th International Conference AMDP 2014
AMDP2014 : International Advisory Committee
Chair,
Kim, Y.H.
Prof, Korea Maritime and Ocean Univ.
Korea
Chiu, S.H.
Prof, National Taiwan Univ. of Science and Technology
Taiwan
Ferguson, W.G.
Prof, The Univ. of Auckland
New Zealand
More. M.A.
Prof, Univ. of Pune
India
Murakami, R.
Prof, National Taiwan Univ. of Science and Technology
Taiwan
Song, X.P.
Prof, Xi’an Jiaotong Univ.
China
Suh, C.M.
Prof, Kyungpook National Univ.
Korea
Yoon, H.K.
Prof, Dongeui Univ.
Korea
Members,
AMDP2014 : International Technical Committee
Chairs,
Kim, T.G.
Prof, Pusan National Univ.
Korea
Ding, B.J.
Prof, Xi’an Jiaotong Univ.
China
Gao, W.
Prof, The Univ. of Auckland
New Zealand
Mark, F.
Prof, Hong Kong Industrial Research Center
Hong Kong
Moriga, T.
Prof, The Univ. of Tokushima
Japan
Niu, J.
Prof, Harbin Institute of Technology
China
Ramakrishna, S.
Prof, National Univ. of Singapore
Singapore
Members,
Alyamani, A.(Dr, KACST, SA)
Bhalerao, A.(Prof, Bharati Vidyapeeth Univ., IN)
Bae, D.H.(Prof, Sungkyunkwan Univ., KR)
Bae, J.Y.(Prof, Keimyung Univ., KR)
Bhattacharyya, D.(Prof, The Univ. of Auckland, NZ)
Chakane, S.D.(Dr, Univ. of Pune, IN)
Chen, C.M.(Prof, Southern Taiwan Univ., TW)
Chen, Z.(Prof, Auckland Univ. of Technology, NZ)
Cheng, Y.B.(Prof, Monash Univ., AU)
Cheong, W.C.( Prof, National Taiwan Univ., TW)
Cho, H.(Prof, Pusan National Univ., KR)
Conor, P.(Mr, Defence Technology Agency, NZ)
Gabbitas, B.(Prof, Univ. of Waikato, NZ)
Gao, J.R.(Prof, Northeastern Univ., US)
Gong, S.K.(Prof, Beihang Univ., CN)
Hao, G.(Prof, Nat’l Univ. of Singapore, SG)
He, Y.D.(Prof, USTB, CN)
Hodgson, M.(Dr, The Univ. of Auckland, NZ)
Huang, W.G.(Prof, Sichuan Univ., CN)
Hur, S.C.(Prof, Gyeongsang Nat’l Univ., KR)
5
Program and Abstract Book for 7th International Conference AMDP 2014
Jan, M.(Prof, National Taiwan Univ., TW)
Jones, M.(Dr, The Univ. of Auckland, NZ)
Jung, Y.G.(Prof, Changwon National Univ., KR)
Kanesaki, A.(Prof, The Univ. of Tokushima, JP)
Kennedy, J.(Dr, Institute of Geological and Nuclear Sciences, NZ)
Kim, J.D.(Prof, Korea Maritime and Ocean Univ., KR)
Kim, J.H.(Prof, Chungnam National Univ., KR)
Kim, J.Y.(Prof, Korea Maritime and Ocean Univ., KR)
Kim, K.Y.(Prof, Korea Univ. of Technology and Education, KR)
Kim, S.J.(Prof, Pukyong National Univ., KR)
Kim, S.S.(Prof, Kyungpook Nat’l Univ., KR)
Jung, Y.C.(Dr, Deagu Mechatron. & Materials Institute, KR)
Shin, D.C.(Prof, Koje College, KR)
Kale, B.B.(Dr, C-MET, IN)
Koinkar Pankaj (Dr, The Univ. of Tokushima, JP)
Kral, M.(Prof, Univ. of Canterbury, NZ)
Kumar Rangari, V.(Prof ,Tuskegee Univ., US)
Kwon, J.D.(Prof, Yeongnam Univ., KR)
Lee, C.S.(Prof, Keimyung Univ., KR)
Lee, D.M.(Prof, Tongmyung Univ., KR)
Lee, H.R. (Prof, Kyungpook National Univ., KR)
Lee, H.S.(Prof, Dong-A Univ., KR)
Lee, J.Y.(Prof, National Taiwan Univ. of Science and Technology, TW)
Lee, T.K.(Prof, Gyeongsang Nat’l Univ., KR)
Lee, Y.S.(Prof, Chungnam Nat’l Univ., KR)
Li, J.G.(Prof, Lanzhou Univ., CN)
Li, L.(Prof, Nat’l Univ. of Singapore, SG)
Li, S.(Prof, Univ. of New South Wales, AU)
Li, S.X.(Prof, IMR-Chinese Academy of Sciences, CN)
Li, Z.W.(Dr, Building Research Association of New Zealand, NZ)
Liang, S.H.(Prof, Xi'an Univ. of Technology, CN)
Lim, J.K.(Prof, Chonbuk Nat’l Univ., KR)
Lin, H.R.(Prof, Southern Taiwan Univ., TW)
Lin, K.M.(Prof, Southern Taiwan Univ., TW)
Liu, A.M.(Prof, Dalian Univ. of Technology, CN)
Liu, S.G.(Prof, Nankai Univ., CN)
Mahajan, J.R. (Dr, Univ. of Mumbai, IN)
Metson, J.(Prof, The Univ. of Auckland, NZ)
More, M. A.(Prof, Univ. of Pune, IN)
More, P.S.(Dr, Univ. of Mumbai, IN)
Mohite,K. C.(Dr, Univ. of Pune, IN)
Moon, K.M.(Prof, Korea Maritime and Ocean Univ., KR)
Nahm, S.H.(Prof, Korea Research Institute of Standards and Science, KR)
Ngan, A.(Prof, Univ. of Hong Kong, HK)
Patil, A.V.(Dr, Univ. of Pune, IN)
Park, W.J.(Prof, Gyeongsang Nat’l Univ., KR)
Qi, M.(Prof, Dalian Univ. of Technology, CN)
Qiao, G.J.(Prof, Xi’an Jiaotong Univ., CN)
Reeves, R.(Prof, Univ. of Canterbury, NZ)
Seo, C.M.(Prof, Kyungpook Nat’l Univ., KR)
Shirsat, M.D.(Prof, Dr, B. A. M. Univ., IN)
Shelke, P.N.(Dr, Univ. of Pune, IN)
Takagi, H.(Prof, The Univ. of Tokushima, JP)
Wang, C.H.(Prof, National Taiwan Univ. of Science and Technology, TW)
Wang, Q.Y.(Prof, Sichuan Univ., CN)
Wang, X.S.(Prof, Tsinghua Univ., CN)
Wei, Y.H.(Prof, Taiyuan Univ. of Technology, CN)
Xu, W.H.(Prof, Xi'an Univ. of Architecture and Technology, CN)
Yang, J.R.(Prof, National Taiwan Univ., TW)
Yang, Z.M.(Prof, Xi’an Jiaotong Univ., CN)
Yonekura, D.(Prof, The Univ. of Tokushima, JP)
Yoon, H.K.(Prof, Dongeui Univ., KR)
Yu, C.Y.(Prof, National Taiwan Univ. of Science and Technology, TW)
Zhang, D.(Prof, Univ. of Waikato, NZ)
Zhang, J.X.(Prof, Xi’an Jiaotong Univ., CN)
Zhang, Q.(Prof, Nat’l Taiwan Univ., KR)
Zhou, C.G.(Prof, Beihang Univ., CN)
Zhou, S.J.(Prof, Shandong Univ., CN)
6
Program and Abstract Book for 7th International Conference AMDP 2014
AMDP2014 : International Executive Committee
Chair,
Lee, B.W.
Prof, Korea Maritime and Ocean Univ.
Korea
Members,
Eum, W.S.(Prof, Yonsei Univ., KR)
Jung, J.M.(Prof, Inha Univ., KR)
Hur, S.C.(Prof, Gyeongsang Nat’l Univ., KR)
Moon, K.M.(Prof, Korea Maritime and Ocean Univ., KR)
Jo, Y.D.(Dr, SK Chemical, KR)
Jung, S.H.(Prof, Korea Maritime and Ocean Univ., KR)
Kim, J.W.(Prof, KAIST, KR)
Kim, J.Y.(Prof, Korea Maritime and Ocean Univ., KR)
Kim, K.H.(Prof, Tong Myung Univ., KR)
Kim, Y.H.(Prof, Gyongnam Univ., KR)
Lee, D.M.(Prof, Tong Myung Univ., KR)
Lee, J.H.(Prof, Jeju Nat’l Univ., KR)
Lee, K.Y.(Prof, Korean Naval Academy, KR)
Lee, S.W.(Dr, Research Center, KR)
Park, J.C.(Prof, Pusan Nat’l Univ., KR)
Park, S.H.(Prof, KAIST, KR)
Shin, D.H.(Dr, Korean Air Line, KR)
Song, C.Y.(Prof, Mokpo Nat’l Univ., KR)
Yoon, H.G.(Prof, Changwon Nat’l Univ., KR)
Yu, S.C.(Prof, POSTECH, KR)
AMDP2014 : Local Organizing committee
Chairs,
Choi, H.S.
Prof,
Korea Maritime and Ocean Univ.
Korea
Kim, J.D.
Prof,
Korea Maritime and Ocean Univ.
Korea
Members,
Hur, S.C., Prof
Hwang, K.I., Prof
Jung, S.H., Prof
Kim, J.Y., Prof
Kim, Y.H., Prof
Lee, B.W., Prof
Park, C.W., Mr
Park, S.H., Prof
Jeong, W. R., Dr
Park, S. J., Ms
Lee, S.J., Prof
Jung, M. K., Mr
AMDP2014 : Secretary General
Hwang, K.I.
Prof,
Korea Maritime and Ocean Univ.
Korea
AMDP2014 : Secretary Board
Ha, J.C.(Dr, Korea Maritime and Ocean Univ., KR)
Lee, J.W.(Mr, Korea Maritime and Ocean Univ., KR)
Jung, S.H.(Prof, Korea Maritime and Ocean Univ., KR)
Joo, M.J.(Ms, Korea Maritime and Ocean Univ., KR)
7
Program and Abstract Book for 7th International Conference AMDP 2014
Welcome Ceremony
Date : 17 July 2014
Venue : The Lobby on the 1st Floor,
College of Ocean Science and Technology (D1 Building),
Korea Maritime and Ocean University
Schedule:
16:30 PM : Registration open
18:00 PM : Welcoming remarks by Prof. Yun-Hae Kim
18:05 PM : Welcome dinner will be served
20:00 PM : End of welcome ceremony
8
Program and Abstract Book for 7th International Conference AMDP 2014
Opening Ceremony
Date : 18 July 2014
Venue : Room No. 100,
College of Ocean Science and Technology (D1 Building),
Korea Maritime and Ocean University
Schedule:
08:00 AM : Registration open (1th Floor)
10:40 AM : Opening address by Prof. Yun-Hae Kim
Chair, AMDP2014
10:45 AM : Welcoming address by President. Han-Il Park
President, Korea Maritime and Ocean University
10:50 AM : Video clip of Korea Maritime and Ocean University
10:55 AM : Congratulatory address by Prof. Ri-ichi Murakami
Chair, AMDP2011
11:00 AM : Congratulatory address by Prof. Jitai Niu
Founder and Chair, ICPNS International Conference
11:05 AM : Congratulatory address by Prof. M.A More
Professor, University of Pune
11:10 AM : Taking a commemorative group photo
9
Program and Abstract Book for 7th International Conference AMDP 2014
Banquet Dinner
Date :
19 July 2014
Venue : 1st Floor, Grand Ball Room,
Commodore Hotel near Busan Station, Busan
Schedule:
19:00 PM
: Introduction of chief guests by Prof. Kwang-Il Hwang
19:05 PM
: Cheerleading remark
19:10 PM
: Dinner will be served
20:05 PM
: Special thanks to Prof. Ri-ichi Murakami (Chair of AMDP2011)
by Prof. Yun-Hae Kim
20:10 PM
: Taking a commemorative group photo
20:15 PM
: Performance
20:50 PM
: Remarks by participants from Japan, China, India, Taiwan and Korea
21:05 PM
: Announcement of AMDP2017
21:10 PM
: Closing remarks by Prof. Yun-Hae Kim
(Chairman of AMDP2014)
21:15 PM
: End of banquet dinner
10
Program and Abstract Book for 7th International Conference AMDP 2014
Closing Ceremony
Date :
20 July 2014
Venue : Room No. 100,
College of Ocean Science and Technology (D1 Building)
Korea Maritime and Ocean University
Schedule:
12:30 PM
: Best paper /poster awarding ceremony presented by Prof. Yun-Hae Kim
13:00 PM
: End of Program
11
Program and Abstract Book for 7th International Conference AMDP 2014
Plenary Speech 1 : Professor Hong-Kyu Lee
Research Institute for Social Technology & Innovation
KAIST, Korea
(Email: hklee777@kaist.ac.kr)
Hong-Kyu Lee is a professor of KAIST in Korea. He got a B.A. degree in political science from Seoul National
University in 1976, a MBA from University of Oregon in 1985, and a Ph.D. in business administration from Hankuk
University of Foreign Studies in 1999. He joined into the faculty of KAIST in 2009 after working for the School of
IT Business at ICU. He also served as a policy maker for the Korean Government from 1977 to 1999 including the
Ministry of Trade, Industry and Energy and the Presidential Secretary Office. He is interested in the research fields
of business strategy and entrepreneurship in information and communications industry.
Idea Factory: A Meaningful Driver for Engineering Education
Abstract: During the past decades, Korean economy has been developed rapidly with an economic model of more input and
efficiency. However, the economic model which focused on the growth only exposed the limitations and the demand for
welfare has been raised. To solve the problem, in the developed countries, many trials has been made to combine the
technology and society. One of the well-known trials is appropriate technology. Appropriate technology is vastly superior to
the primitive technology of bygone ages but at the same time much simpler, cheaper, and freer than the super-technology of
the rich (Schumacher, 1973). Despite of the meaningful definition, it has faced with a number of failures. Technologies
without consideration of user environment and economic sustainability could not be well adapted.
Not to follow these examples, technology should meet the social needs. Technology can be properly used to meet the social
needs of the neglected ones including the disabled, the elderly and the infirm, and to solve the social issues arising from the
environmental and the criminal problems. In addition, to solve the sustainability issue, technological ideas and business mind
should be in harmony.
Idea Factory (IF) in KAIST is an experiment to solve these issues. First, to discover the ideas, various types of social issues
are figured out with methodologies such as Delphi method and scenario analysis. To realize these ideas, the concept of fablab
in which students can make anything with tools (3D printer, Laser cutter, milling machine) was adopted 3D printer, Laser
cutter. Not only the students can use the tools, but they also can have lectures of engineering, creative thinking, and business
courses. While the idea enter market, after the prototyping, developers face the problems of ideation, commercialization, and
industrialization. To cross over the ‘Chasms’ KITECH develops the prototypes from the IF and RISTI develops business
models. The ideas which went through the steps of prototyping can enter the market based on these supportive efforts. Finally,
to maintain this process, an eco-system has to be built up. Not only KAIST and KITECH, NGOs, government and social
enterprises should cooperate with to enable sustainable value creation.
12
Program and Abstract Book for 7th International Conference AMDP 2014
Plenary Speech 2 : Professor Jitai Niu
School of Materials Science and Engineering
Harbin Institute of Technology (HIT), P.R.China
(Email: niujitai@163.com)
Professor NIU devotes the research on weldability of new materials as well as physical and numerical simulation
of materials processing.
Professor NIU was elected as the Chairman of International Federation of Physical and Numerical Simulation of
Materials Processing (IFPNS) which was founded at the 7th International Conference on Physical and Numerical
Simulation of Materials Processing held in Oulu , Finland in June16-19, 2013.
Professor NIU have been also hired as a foreign academician of Russian Academy of Nature Science from June
2008.
Vacuum Brazing of High Volume Fraction SiC Particles Reinforced Aluminum Matrix
Composites
Abstract: This experiment chooses A356 aluminum matrix composites containing 55% SiC particle reinforcing phase
as the parent metal and Al-Si-Cu-Zn-Ni alloy metal as the filler metal. The brazing process is carried out in vacuum
brazing furnace at the temperature of 550℃ and 560℃ for 3 minutes. The interfacial microstructures and fracture
surfaces are investigated by optical microscopy (OM), scanning electron microscopy (SEM), transmission electron
microscopy (TEM) and energy spectrum analysis (EDS). The result shows that the wettability as well as the adequacy
of element diffusion are superior when brazing at 560℃, because of higher activity and liquidity. Dislocations and
twins are observed at the interface between filler and composite due to the different expansion coefficient of the
aluminum alloy matrix and SiC particles. The fracture analysis shows that the brittle fracture mainly locates at interface
of filler and composites. Finally, physical model of brazing process is briefly established.
13
Program and Abstract Book for 7th International Conference AMDP 2014
Plenary Speech 3 : Professor Hyoung-Jin Cho
Department of Mechanical and Aerospace Engineering,
University of Central Florida, Orlando, USA
(Email: hjcho@ucf.edu)
Hyoung-Jin Cho is a Professor in the Department of Mechanical and Aerospace Engineering at the University of
Central Florida, Orlando, Florida, USA. He earned his PhD in Electrical Engineering from the University of Cincinnati
in 2002, MS and BS in Materials Engineering from Seoul National University in 1991 and 1989, respectively. He
worked as Research Engineer at Korea Electronics Technology Institute (KETI) from 1993 to 1997. He joined UCF
in 2002 as an Assistant Professor. He was a recipient of US National Science Foundation CAREER award in 2004
and WCU (World Class University) visiting professorship (2009-2013) by Ministry of Education, Science and
Technology, Korea. The application of new and emerging materials into MEMS host device platforms has always
been his primary research interest. His current research interests include smart surfaces for wettability control,
nanoparticle-integrated gas sensors, ROS (reactive oxygen species) sensors, graphene-based actuators and
thermocapillary-driven droplet manipulation.
Liquid actuators based on electrocapillary and thermocapillary
Abstract: Liquid actuators which utilize physical phenomena taking place at an interface between two fluids and a
solid (wetting line) and an interface between three fluids (triple contact line) are presented.
A droplet placed on a solid
surface or floating on another immiscible liquid is taken as a model for study.
In the former case, the physical interactions that involve wetting line energy, wetting line velocity, pinning and contact
angle hysteresis have been accounted for in designing and explaining the operation of a constant flow-rate microfluidic
pump based on EWOD (electrowetting-on-dielectrics). In the liquid actuator which acts as a micropump, a pressure
gradient is induced between a droplet and a meniscus in the channel without any moving parts. The surface tension
could be changed due to the varying electric potential, which enables on-demand on/off flow regulation. The
non-mechanical valve switching in relation to EWOD voltages and the on-demand pumping with respect to various
droplet sizes are proposed and explained. The predicted driving pressure from the model study was correlated to the
measured data from the device. Dynamic behaviors that are comprised of contact angle hysteresis, wetting line velocity
effect, and electowetting are analyzed with the fabricated device platform. The results implicate that these effects, often
being ignored during the implementation, must be taken into consideration.
(The rest has been omitted.)
14
Program and Abstract Book for 7th International Conference AMDP 2014
Plenary Speech 4 : Dr. Hajime Sakakita
Energy Technology Research Institute,
National Institute of Advanced Industrial Science and Technology (AIST), Japan
(Email: h.sakakita@aist.go.jp)
Dr. Hajime SAKAKITA received his Doctorate at Department of Aerospace Engineering, Graduate school of Engineering,
Nagoya University, Japan in 1996. He worked at Electrotechnical Laboratory (ETL), Tsukuba, Japan in 1996 to 2000 as a
Research Scientist, which was restructured to National Institute of Advanced Industrial Science and Technology (AIST) in 2001.
He joined Department of Physics, University of Wisconsin (UW), Madison, USA in 2000-2001 as a visiting scientist, and
worked at AIST in 2001 to 2011 as a Senior Research Scientist, and is working as a Group Leader
of Innovative Plasma
Technologies Group, Energy Technology Research Institute, AIST from 2011. He also joins Department of Engineering
Mechanics and Energy, Cooperative Graduate School of Systems and Information Engineering, University of Tsukuba from
2010 as an Associate Professor.
In these twenty years, he studied on plasma confinement experiments (Tokamak experiments in National Institute for Fusion
Science (NIFS), Nagoya, Japan, and Reversed Field Pinch experiments in ETL, UW and AIST) and diagnostic system
(Spectroscopy and so forth) for high temperature plasmas of nuclear fusion. Also, he has developed extreme
high-current-density ion beam system using the concave electrode in both low and high beam energy regions for the nuclear
fusion and material production. In recent ten years, he is studying on plasma applications such as material productions,
combustion controls, laboratory and astrophysical plasmas, and especially, medical treatment using newly developed “mild
plasma” from the pathological viewpoint through collaborations with medical doctors. He published about 100 scientific
papers on plasma physics and submitted to many patents on plasma technologies.
Industrial applications using innovative plasma technologies (Developments of the low energy
ion beam, and studies on medical applications)
Abstract: Innovative Plasma Technologies Group at AIST has been studied for the realization of safe and secure world
using several plasma technologies. In this presentation, I will show the study on low-energy ion beam system, and low
temperature plasma application to the medical use.
Phenomena of spontaneous strong focusing of an ion beam with a high current density (> 1 mA/cm2) and an extremely
low energy (~ 150 eV) have been studied in various operating conditions. When the hydrogen ion beam energy reached
around 150 eV, the ion beam transits from a diverged state to a focused state non-lineally, which is accompanied by an
abrupt appearance of electron current density having the almost same value as that of ion beam.
(The rest has been omitted.)
15
Program and Abstract Book for 7th International Conference AMDP 2014
Plenary Speech 5 : Professor Ri-ichi Murakami
Department of Materials Science and Engineering,
National Taiwan University of Science and Technology, Taiwan
(Email: anewmoon816@gmail.com)
Ri-ichi Murakami was born in Kochi city, Japan, in 1948. He received the B.S. and M.S. degrees in mechanical engineering from
the University of Tokushima, Tokushima, in 1972 and in 1974, respectively. He received the Ph.D. degree in mechanical
engineering from Tokyo Institute of Technology, Tokyo, in 1977. From 1977 to 1987, he was as an Assistant Professor with the
Mechanical Engineering Department, The University of Tokushima. Since 1987, he has been an Associate Professor with the
Mechanical Engineering Department, The University of Tokushima. He became Professor in with the Mechanical Engineering
Department, The University of Tokushima, in 1993. He is now the Vice director of Center for International Cooperation in
Engineering Education (CICEE), The University of Tokushima, Japan. He is also promoting to educate graduate school students
by cooperation between University of Tokushima and the partner Universities from abroad. His research area includes Metal
fatigue, Wear and friction behavior of advanced materials which are modified by surface modification technology and
functional thin films like TCO, DLC and Diamond film. He is the author of ten books and has published more than 200 papers
in peer-reviewed international journals, got award for oral presentations in the conference
Effect of spacer layer on enhancement and quenching of photoluminescence by surface plasmon
Abstract: Metal nanoparticles have the ability to localize and strongly enhance the incident electromagnetic field due
to the surface plasmon polariton. The coupling between AuNPs and ZnO thin films affects their emission properties. In
this study, we prepared the ZnO/Al2O3/AuNPs multilayer films, and investigated the effect of spacer layer on
enhancement and quenching of photoluminescence by surface plasmon. The emission intensities of the thin films vary
when Al2O3 space layer with different thickness was embedded in the ZnO/Au films, consistent with theoretical
predictions. The photoluminescence modulation is also made via controlling the polarization of the excitation source.
The photoluminescence anisotropy of these systems shows that enhanced photoluminescence can be achieved through
coupling of the emission from ZnO with the surface plasmon resonance of AuNPs.
16
Program and Abstract Book for 7th International Conference AMDP 2014
Plenary Speech 6 : Professor M.A. More
Department of Physics
University of Pune, India
(Email: mam@physics.unipune.ac.in)
Dr. Mahendra A. More, currently working as Professor at Department of Physics, University of Pune, Pune, has teaching and
research experience of more than 20 years. His research area deals with Experimental Materials Science, in particular
synthesis, characterization and field emission (FE) investigations of variety of inorganic and organic semiconducting
nanostructures. In Indian context, he is one of the pioneering researchers in the area of FE and field ion microscopy.
Furthermore, he has gained expertise in indigenous design, development and commissioning of variety of synthesis as well as
characterization systems which include
HFCVD (diamond thin film synthesis), programmable Quatrz tube furnace (synthesis
of variety of un-doped and doped nanostructures and nanocomposites of metal oxides, metal sulfides, etc), UHV FEM and FIM
systems (facilitating imaging at 4k). His research work has been published in journals of international repute and high impact
factors such as Small, ACS Nano, JPC(B,C), JMC, Nanotechnology (IOP), APL, etc. He has more than 110 publications, having
very good citations, reflected in terms of the h index - 19. He is Fellow of Maharashtra Academy of Sciences, recipient of
prestigious Commonwealth Academic Staff Fellowship and INSA Visiting Researcher Fellowship. He has delivered a number
talk in national and international conferences/seminars. He has numerous national and international collaborations and is a
visiting researcher at the University of Tokushima, Japan.
Carbon based nanostructures and nanocomposites as supercapacitors: a brief review
Abstract. In recent years, Supercapacitors (Electrochemical capacitors) have attracted considerable attention of
scientists, engineers and technologist worldwide, owing to their potential application in energy storage devices.
Furthermore, they are lightweight and their synthesis as well as disposal is ecofriendly. Amongst the numerous
nanomaterials the carbon based nanostructures, both organic (conducting polymers) and inorganic materials (carbon
nanotubes, graphene), and their nanocomposites have been extensively studied for their supercapacitance performance.
We have investigated supercapacitance characteristics of various systems which include, Pt-nanoparticles decorated
carbon nano-onions, nanocomposite of polyaniline nanotubes-SnO2 nanoparticles and reduced graphene oxide (RGO).
In this paper, a brief review of the recent progress in supercapacitance studies carried out world over is presented.
17
Program and Abstract Book for 7th International Conference AMDP 2014
Plenary Speech 7 : Professor Yun-Hae Kim
Department of Marine Equipment Engineering,
Korea Maritime and Ocean University, Korea
(Email: yunheak@kmou.ac.kr)
Yun-Hae Kim was born in Daegu city, Korea. He received the B.S. and M.S. degrees in materials engineering from Korea
Maritime and Ocean University, Busan, in 1983 and in 1987, respectively. He also received the M.S. degree in mechanical
engineering from the University of Tokushima, Tokushima, in 1990. He received the Ph.D. degree in mechanical engineering
from Kyushu University, Fukuoka, in 1993. Prof. Kim was a guest Professor at National Institute of Standards and Technology in
the U.S.A. He is currently a Professor at the Division of Marine Equipment Engineering at Korea Maritime University in Busan,
Korea. And He is now the Vice President of The Korean Society for Engineering Education, Chairs of the ACEE2013,
AMDP2014 and Co-chairs of ICAEMT2013, IFMME2013, ICMPMT and ACEE2014, Editors-in-Chief of Nano Hybrids, Advanced
Engineering Forum, International Journal of Ocean Science Engineering and JOET. He was a director of Innovation Center for
Engineering Education (ICEE) at Korea Maritime and Ocean University. He founded the Asian Conference on Engineering
Education (ACEE) in 2009. He is trying to promote the innovation in engineering education by cooperation with Asian country.
His research area includes the composites fabrication, the evaluation of strength and physical metallurgy. He is the author of
five books and has published more than 150 papers in peer-reviewed international journals, got awards for oral presentations
in the conference.
Application of composite materials to the maritime and ocean
Abstract: Composite material is a rising new material in the industry because it is light in weight, very durable, and corrosion
resistant. Meanwhile, various environmental concerns caused by global warming had drawn the interest of scientists to
prevent further contamination. Green industrialization is also required to shipping and ship building industries, and many
agreements and treaties are passed at an international level to encourage the demand of “Green Ship” technology.
Especially, researchers in IMO developed EEDI technology to reduce green-house gases exhausted from large vessels.
In the
process, a proper composite material must be used in order to increase propulsion efficiency and reduce the overall weight of a
ship. In case of an oil drilling ship, a type of off shore vessel, the ship must be supplied with special pipes that endure water
pressure, current, and chemicals when it extracts oils or gases in deep sea. Experts think that the materials commonly used in
current ship building industries ought to be reconsidered and reviewed, and suggest that introducing new composite materials to
the industry will help to serve the purpose more efficiently. Therefore, replacing current materials with new composite
materials that are applicable in areas of Marine Equipment Engineering and offshore plant remains as researchers’ one of big
assignments.
18
Program and Abstract Book for 7th International Conference AMDP 2014
Keynote Speakers
Professor Chiu, S.H
Nat'l Taiwan University of Science and Technology Taiwan, Taiwan
Topic : Optimization of process parameters for dimensional
accuracy in an area-forming rapid prototyping system using
Taguchi method
Professor Tae-Gyu Kim
Pusan National University, Korea
Topic : Fabrication and Characteristic study for Micro Pattern Roll
Mold with DLC Coating
Dr. Jae-Ho Kim
National Institute of Advanced Industrial Science and
Technology(AIST), Japan
Topic : Advanced microwave plasma CVD processes for the
synthesis of nanocrystalline diamond and graphene films
Professor Song, X.P.
Xi'an Jiaotong Univ., China
Topic : Simultaneous structural change at ferromagnetic transition
19
Program and Abstract Book for 7th International Conference AMDP 2014
Professor Moriga, T.
The University of Tokushima, Japan
Topic : Control of Optical Properties of Oxynitride Pigments and
Phosphors through Cation and Anion Stoichiometries
Professor Jun-Cai Sun
Dalian Maritime University, China
Topic : The Corrosive Characteristics of Surface-modified Stainless
Steel Bipolar Plate in Solid Polymer Fuel Cell
President Hee-Soo Yoon
Dongdo Basalt.Co.,Ltd, Korea
Topic : Development of High Functional Abrasive Materials for
Industrial Application
Professor Mahendra D. Shirsat
Babasaheb Ambedkar Marathwada University, India
Topic : Metal nanoparticle decorated of organic conducting
polymer functionalized single wall carbon nanotubes: highly
selective sensing platform
20
Program and Abstract Book for 7th International Conference AMDP 2014
Conference Venue
Busan, a bustling city of approximately 3.6 million residents, is located in the southeastern tip of the Korean
peninsula. The natural environment of Busan is a perfect example of harmony between mountains, rivers and sea. Its
geography includes a coastline with superb beaches and scenic cliffs, mountains which provide excellent hiking and
extraordinary views, and hot spring scattered throughout the city.
KMOU is the only maritime-specialized university in Korea, leading the marine industry, which is the core industry
of Korea, and contributing to the nation's economy. Since its foundation in 1945, we have educated many marine
human resources focusing on the fields of maritime affairs, engineering, sciences and social sciences.
KMOU is the place where young people, who want to challenge the ocean, study and research. They want to pour
their passion to the ocean, which is the future of the people of the world. Based on KMOU's traditional honor and
prestige, we pursue our goal of being the world class maritime research oriented university and training the future
global ocean leader. KMOU campus has world-class facilities and infrastructures. The construction of the ocean
cluster in cooperation with related public institutes will help KMU to contribute to more creative and forward-looking
marine education and research.
21
Program and Abstract Book for 7th International Conference AMDP 2014
Access Information
How to get to Korea Maritime and Ocean University
Public transportation
 From Yeongdo Bridge: City Bus No.135(The bus enters into KMOU campus)
 From Busan Station: City Bus No. 88, 101(Please get off the station near the entrance of KMOU)
 From Gimhae International Airport(Airport Limousine): Gimhae International Airport(Get on)
→ Jungang-dong(Get off) → City Bus No.88, 101 → KMOU
※If you get on the bus going to Taejongdae, please get off the station near the
entrance of KMOU and then get on the shuttle bus or walk to KMOU.
 Information for the limousine schedule: +82-51-972-7747
22
Access Information for Conference Venue ( D1 Building)
Program and Abstract Book for 7th International Conference AMDP 2014
23
Program and Abstract Book for 7th International Conference AMDP 2014
Conference Themes :
A : Composite materials, Smart materials and structure
B : Amorphous and nano-structured materials,
Eco-materials and energy materials,
Electronic and electrical materials,
Nano materials
C:
Mechanical and environmental properties of materials,
High temperature structural materials
D : Chemical materials and concrete materials
E:
X-ray analysis,
Evaluation and sensors and biomedical applications
F:
Surface and interface analyses of materials
G : Marine technology, Green innovation
24
Program and Abstract Book for 7th International Conference AMDP 2014
Time Table for Lectures and Events
Date
Event (Place and Time)
Registration Opens (1st floor, D1 Building)
Welcome Ceremony (1st floor, D1 Building)
July 17
(Thu)
Event
Rooms
July 18
(Fry)
July 19
(Sat)
A
100
C
447
D
450
18:00-20:00
E
426
F
436
G
259
09:00-
09:00-
09:00-
09:00-
09:00-
09:00-
09:00-
10:20
10:20
10:20
10:20
10:20
10:20
10:20
Opening Ceremony (Room No.100, D1 Building)
10:40-11:10
Plenary speech 1
(Room No.100, D1 Building)
11:10-11:40
Plenary speech 2
(Room No.100, D1 Building)
11:40-12:10
13:20-
13:20-
13:20-
13:20-
13:20-
13:20-
13:20-
14:40
14:40
14:40
14:40
14:40
14:40
14:40
15:00-
15:00-
15:00-
15:00-
15:00-
15:00-
15:00-
16:20
16:20
16:20
16:20
16:20
16:20
16:20
Plenary speech 3
(Room No.100, D1 Building)
09:00-09:30
Plenary speech 4
(Room No.100, D1 Building)
09:30-10:00
10:40-
10:40-
10:40-
10:40-
10:40-
10:40-
10:40-
12:00
12:00
12:00
12:00
12:00
12:00
12:00
Poster session & lunch time
(Room No.440, D1 Building)
12:00-15:00
15:00-
15:00-
15:00-
15:00-
15:00-
15:00-
15:00-
16:20
16:20
16:20
16:20
16:20
16:20
16:20
Banquet
July 20
(Sun)
B
446
16:00-20:00
(Grand Ball Room, Commodore Hotel near Busan Station) 19:00-21:30
Plenary speech 5
(Room No.100, D1 Building)
09:00-09:30
Plenary speech 6
(Room No.100, D1 Building)
09:30-10:00
Plenary speech 7
(Room No.100, D1 Building)
09:00-10:30
10:50-
10:50-
10:50-
10:50-
10:50-
10:50-
10:50-
12:10
12:10
12:10
12:10
12:10
12:10
12:10
Closing ceremony
(Room No.100, D1 Building)
25
12:30-13:00
Program and Abstract Book for 7th International Conference AMDP 2014
Event Room A : Composite materials, Smart materials and structure
- Room No. 100 (D1 building) -
July 18
Registration open
08:00
Chair: M.D. Shirsat,
09:0009:20
Co-Chair: Tae-Gyu Kim
Keynote speech: Professor Jun-Cai Sun, Dalian Maritime University, China
09:2009:40
A101
09:4010:00
A102
10:0010:20
A103
(Invited Talk) Cadmium indium selenide semiconducting nanofibers by single step electrochemical route
B.G.Wagh, Anuradha B. Bhalerao, R.N. Bulakhe, C.D. Lokhande
Investigation of infrared emissivity property of C/SiC composites with different fiber preforms
Fuyuan Wang, Laifei Cheng, Qing Zhang, Litong Zhang
Boron doped diamond cutting tools by micro wave plasma chemical vapor deposition
Jong Seok Kim, Yeong Min Park, Heun Chul Lee, Jeong Wan Kim, Tae Gyu Kim
10:20
10:40
10:4011:10
Coffee break
Opening Ceremony
Chair: Yun-Hae Kim
Plenary speech 1 : Prof. Hong-Kyu Lee, KAIST, Korea
Title : Idea Factory: A Meaningful Driver for Engineering Education
11:1011:40
Plenary speech 2 : Prof. Jitai Niu, Harbin Institute of Technology, China
11:4012:10 Title : Vacuum brazing of high volume fraction SiC particles reinforced aluminum matrix composites
12:1013:20
Lunch break
Chair: Hitoshi Takagi,
13:2013:40
A104
13:4014:00
A105
14:0014:20
A106
14:2014:40
A107
Co-Chair: Mohit Sharma
(Invited Talk) Development of nanocomposites reinforced by cellulose fibers from paper sludge
Hitoshi Takagi , Antonio N. Nakagaito, Kazuya Kusaka, Yuya Muneta
Influence of alkali treatment on mechanical properties of poly lactic acid bamboo fiber green composites
Shoma Maruyama, Hitoshi Takagi, Yoshitoshi Nakamura, Antonio Norio Nakagaito, Chizuru Sasaki
(Invited Talk) Processing and mechanical properties of nanocomposites based on halloysite
nanotube and unsaturated polyester resin
Yun-Hae Kim, Soo-Jeong Park, Jin-Woo Lee, Kyung-Man Moon
Wear resistance properties of Nylon-SiC hybrids composites
Mohit Sharma, Shengqin Wang, Yew Wei Leong
14:4015:00
Coffee break
Chair: Huajie Xu,
15:0015:20
A108
15:2015:40
A109
15:4016:00
A110
16:0016:20
A111
Co-Chair: Jin-Woo Lee
Comparison of two methods for testing the In-Plane shear property of 3D stitched plain woven C/SiC
composite
Huajie Xu, Litong Zhang, Laifei Cheng
Microstructural analysis of NITE SiC/SiC composite using HVEM examination
Hanki Yoon, Jungseok Oh,Gon-Ho Kim, Hyun-Su Kim, HeishichiroTakahashi
Solvent exchange to exfoliate graphene oxides into epoxy with improved mechanical and thermal properties
FuKe Wang, Chaobin He
26
Program and Abstract Book for 7th International Conference AMDP 2014
July 19
Chair: Tae-Gyu Kim
09:0009:30
09:3010:00
Plenary speech 3 : Prof. Hyoung Jin Cho, USA
Title : Liquid actuators based on electrocapillary and thermocapillary
Plenary speech 4 : Dr. Hajime Sakakita, AIST, Japan
Title : Industrial applications using innovative plasma technologies (Developments of the low
energy ion beam, and studies on medical applications)
10:0010:40
Coffee break
Chair: S.U.Ekar,
10:4011:00
A201
11:0011:20
A202
11:2011:40
A203
11:4012:00
A204
Co-Chair: Chen-Hao Wang
An easy-to-decompose binder for Ti metal injection moulding: preparation and characterization of feedstock
Muhammad Dilawer Hayat, Guian Wen, Mark Jones, Peng Cao
Biosynthesis of silver nanoparticles using Ganoderma-mushroom extract
S.U. Ekar, Y.B. Khollam, S. D. Gunjal, P.M. Koinkar, S.A. Mirji, R.S. Mane, Sung-Hwan Han, S.S. Jadhav
Effect of jute fiber's thermal degradation on the fiber strength and its polymer composites
Takayasu Fujiura, Ryosuke Nakamura, Tatuya Tanaka, Yoshihiko Arao
Co-Fe3O4 Bi-metallic nanoparticles as efficient catalysts for oxygen reduction reaction in anion
exchange membrane fuel cell
Chen-Hao Wang, Sun-Tang Chang, Chih-Wei Yang, Yu-Chuan Lin, Hsin-Cheng Hsu, Hsin-Chih
Huang
12:0015:00
Poster session & Lunch time
Chair: Shih-Hsuan Chiu,
15:0015:20
15:2015:40
A205
A206
Evaluation of residual strength in the basalt fiber reinforced composites under impact damage
Jin-Woo Lee, Yun-Hae Kim, Kyung-Man Moon, Jin-Cheol Ha
Studies on Mechanical, Thermal, and Morphology of Diallyl bisphenol A modified Bismaleimide/
Epoxy Interpenetrating network composite
Rajeeb Kumar Jena, Chee Yoon Yue
15:4016:00
A207
16:0016:20
A208
19:00
Co-Chair: Sujito
Fabrication and mechanical properties of bacterial cellulose (BC) reinforced poly-lactic acid (PLA)
biocomposite
Sujito
Banquet
27
Program and Abstract Book for 7th International Conference AMDP 2014
July 20
09:3010:00
Chair: Jun-Cai Sun
Plenary speech 5 : Prof. Ri-ichi Murakami, National Taiwan University of Science and
Technology, Taiwan
Title : Effect of spacer layer on enhancement and quenching of photoluminescence by surface plasmon
Plenary speech 6 : Prof. Mahendra A. More, University of Pune, India
Title : Carbon based nanostructures and nanocomposites as supercapacitors: a brief review
10:0010:30
Plenary speech 7 : Prof, Yun-Hae Kim, KMOU, Korea
Title : Application of composite materials to the maritime and ocean
09:0009:30
Chair: Shin Ueoka,
10:5011:10
A301
11:1011:30
A302
11:3011:50
A303
11:5012:10
A304
12:3013:00
Co-Chair: Eun Soo Lee
Removal of cesium ions using prussian blue and magnetic flocculant
Shin Ueoka, Keisuke Kimura, Lena Karlsena, Tomoki Yabutani, Mikito Yasuzawa, Kanemi Abe
Analysis of metal surface properties after plastic deformation using the atomic force microscope
Takahiro himizu, Satoshi Fukui, Daisuke Yonekura, Ri-ichi Murakami
Closing Ceremony
28
Program and Abstract Book for 7th International Conference AMDP 2014
Event Room B : Amorphous and nano-structured materials, Eco-materials and
energy materials, Electronic and electrical materials, Nano materials
-Room No. 446 (D1 building)-
July 18
Registration open
08:00
Chair: Kei-ichiro Murai,
09:0009:20
09:2009:40
09:4010:00
10:0010:20
10:20
10:40
Co-Chair: Subodh Bhandarkar
Keynote speech: Professor Tae-Gyu Kim, Pusan National University, Korea
B101
B102
B103
B104
(Invited Talk) Study of thermoelectric properties of Ca-doped LaCoO3
Kei-ichiro Murai, Ken Nagai, Masaru Takahashi, Shosuke Takakusa, Toshihiro Moriga
Inverse Spin Hall effect for conductive oxides
Zhiyong Qiu, Dazhi Hou, Ken-ichi Uchida, Yuki Shiomi, Eiji Saitoh
(Invited Talk)Preparation and characterization of electroluminescent pure and doped PVK :TiO2 polymer thin films
Vivek M. Raut,
Surface plasmon properties of silver nanostructures fabricated using extremely non-equilibrium, hot
and dense plasma
Mahesh Prasad Srivastava, Bilasini Devi Naorem
10:4011:10
Opening Ceremony
Chair: Yun-Hae Kim
Plenary speech 1 : Prof. Hong-Kyu Lee, KAIST, Korea
Title : Idea Factory: A Meaningful Driver for Engineering Education
11:1011:40
Plenary speech 2 : Prof. Jitai Niu, Harbin Institute of Technology, China
11:4012:10 Title : Vacuum brazing of high volume fraction SiC particles reinforced aluminum matrix composites
12:1013:20
Lunch break
Chair: Byeong Woo Lee,
13:2013:40
13:4014:00
14:0014:20
14:2014:40
B105
B106
B107
B108
Co-Chair: Antonio Norio Nakagaito
(Invited Talk) High temperature stability of aluminized Inconel 617
Byeong Woo Lee, Hyun Cho
Cellulose nanofiber extraction from grass by a modified kitchen blender
Antonio Norio Nakagaito, Koh Ikenaga, Hitoshi Takagi
Fabrication and evaluation of high strength cellulose/PVA composite films
Noor Hisyam Noor Mohamed, Hitoshi Takagi, Antonio Norio Nakagaito
Improvement of corrosion resistance of carbon steel by AIH-FPP with Cr/Ni hybridized particles
Shota Iwamae, Takuma Sasaki , Kazue Murai , Yutaka Kameyama, Jun Komotori, Kengo Fukazawa,
Yoshitaka Misaka, Kazuhiro Kawasaki
14:4015:00
Coffee break
Chair: Ri-ichi Murakami,
15:0015:20
15:2015:40
15:4016:00
16:0016:20
B109
B110
B111
B112
Co-Chair: Jae-Ho Kim
Diamond filled electronspun PAN carbon fibers incorporated with MWCNTs
Qi Dong, Chun Yuan Lu, Byung Joo Kim, Bo Kyung Choi, Tae Gyu Kim
Macroscopic evaluation of plastic deformation and fracture process by using infrared thermography method
Nobuaki Nagatomo, Hidetoshi Sakamoto, Yoshifumi Ohbuchi
The CIGS films for solar cells fabricated using sputtering method
Ryuichi Ozaki, Takahiro Yamaguchi, Shoma Hara, Taichi Kohno, Motoi Nakao
Failure strain prediction of an arctic class steel(EH36) according to stress triaxiality
Woong Shik Nam, Sung Won Yoon, Sung Ju Park, Joonmo Choung
29
Program and Abstract Book for 7th International Conference AMDP 2014
July 19
Chair: Tae-Gyu Kim
09:0009:30
09:3010:00
Plenary speech 3 : Prof. Hyoung Jin Cho, USA
Title : Liquid actuators based on electrocapillary and thermocapillary
Plenary speech 4 : Dr Hajime Sakakita, AIST, Japan
Title : Industrial applications using innovative plasma technologies (Developments of the low
energy ion beam, and studies on medical applications)
10:0010:40
Coffee break
Chair: A.V.Patil,
10:4011:00
B201
Prediction of mechanical behavior for particulate reinforced composite at different temperatures
using time-temperature superposition
Bohwi Seo, Jaehoon Kim
11:0011:20
B202
11:2011:40
B203
11:4012:00
B204
12:0015:00
Improvement of the functionalities of natural rubber/cellulose composites using epoxidized
natural rubber
Kunihiro Araki, Syonosuke Kaneko, Koki Matsumoto, Asahiro Nagatani, Tatsuya Tanaka, Yoshihiko
Arao
Poster session & lunch time
Chair: Jun-Ho Choi,
15:0015:20
B205
15:2015:40
B206
15:4016:00
B207
16:0016:20
B208
19:00
Co-Chair: Jaeho Kim
Co-Chair: Kwang-il Hwang
Selective electro-thermal growth of zinc oxide nanowires on photolithographically patterned
electrode for microsensor applications
Young Duk Suh, Sukjoon Hong, Gunho Kim, Habeom Lee, Junyeob Yeo, Kwang-il Hwang,
Jun-Ho Choi, Seung Hwan Ko
Eco-friendly glass color coating process using RF magnetron sputtering
Jeong Wan Kim, Yeong Min Park, Heun Chul Lee, Tae Gyu Kim
Characterization of osmium complex / enzyme / carbon felt electrodes modified with carbon
nanotube-ionic liquid gel and agarose matrix
Yohei Yamada, Chikahiro Wada, Toshio Watanabe, Haruhiko Sakuraba, Tomoki Yabutani,
Toshio Takayanagi, Junko Motonaka
Banquet
30
Program and Abstract Book for 7th International Conference AMDP 2014
July 20
09:0009:30
09:3010:00
10:0010:30
Chair: Jun-Cai Sun
Plenary speech 5 : Prof. Ri-ichi Murakami, National Taiwan University of Science and
Technology, Taiwan
Title : Effect of spacer layer on enhancement and quenching of photoluminescence by surface plasmon
Plenary speech 6 : Prof. Mahendra A. More, University of Pune, India
Title : Carbon based nanostructures and nanocomposites as supercapacitors: a brief review
Plenary speech 7 : Prof, Yun-Hae Kim, KMOU, Korea
Title : Application of composite materials to the maritime and ocean
Chair: Moon Kyu Kwak,
Extreme hydrophobicity and omniphilicity of high-aspect-ratio silicon structures
10:5011:10
B301
11:1011:30
B302
11:3011:50
B303
11:5012:10
B304
12:3013:00
Co-Chair: Naohiro Ryu
Moon Kyu Kwak, Cheol Woo Park, Choon Young Lee, KwangIl Hwang, ChoonMan Park,
Hoon Eui Jeong, Jun Ho Choi
Natural frequency measurement of an artificial wing using high-speed digital image correlation method
Vang Hoang My, Ha Ngoc San, Goo Nam Seo
Formation of ferromagnetic Fe3Si film using focused ion beam
Naohiro Ryu, Shinji Nagamachi, Motoi Nakao
Closing Ceremony
31
Program and Abstract Book for 7th International Conference AMDP 2014
Event Room C : Mechanical and environmental properties of materials, High
temperature structural materials
-Room No. 447 (D1 building)-
July 18
Registration open
08:00
Chair: Kaito Naka,
09:0009:20
09:2009:40
09:4010:00
C101
10:0010:20
C103
Co-Chair: Dong-Chul Shin
Keynote speech: Professor X.P. Song, Xi`an Jiaotong University, China
C102
Influence of the radius of notch curvature on fracture load of piezoelectric ceramics
Dae-Weon Kim, Dong-Chul Shin, Yeong-Min Park, Tae-Gyu Kim
A review of simple methods for arresting crack growth
Md. Shafiul Ferdous, Kaito Naka, Chobin Makabe, Tatsujiro Miyazaki
Welding residual stress analysis of 347H austenitic stainless steel boiler tubes using experimental
and numerical approaches
Wanjae Kim, Kwang Soo Kim, Hansang Lee, Keunbong Yoo
10:20
10:40
10:4011:10
Coffee break
Opening Ceremony
Chair: Yun-Hae Kim
Plenary speech 1 : Prof. Hong-Kyu Lee, KAIST, Korea
Title : Idea Factory: A Meaningful Driver for Engineering Education
11:1011:40
Plenary speech 2 : Prof. Jitai Niu, Harbin Institute of Technology, China
11:4012:10 Title: Vacuum brazing of high volume fraction SiC particles reinforced aluminum matrix composites
12:1013:20
Lunch break
Chair: Jong-Do Kim,
13:2013:40
13:4014:00
14:0014:20
14:2014:40
14:4015:00
C104
C105
C106
Co-Chair: Chobin Makabe
Fatigue properties of Al alloy depending on surface treatment and fatigue testing methods
Min-Soo Suh, Chang-Hee Suh, Chang-Min Suh, Seung-Hoon Nahm
Effect of specimen thickness on fatigue limit in carbon composites
Chobin Makabe, Takuya Nakayama, Masaki Fujikawa, Kazuo Arakawa, Dingding Chen
The effects of two-step solution heat treatment of Al-6Si-2Cu alloy for lightweight automotive on
mechanical properties
Seung-Pyo Hong, Chung-Seok Kim
C107
Coffee break
Chair: M. Goto,
15:0015:20
15:2015:40
15:4016:00
16:0016:20
C108
C109
C110
C111
Co-Chair: Liuyi Xiang
(Invited Talk) Fatigue induced damage and crack growth of Cu processed by ECAP
M. Goto, S. Z. Han, K. Morita, J. H. Ahn, J. Kitamura, M. Baba, S. S. Kim
Fabrication and properties of laminated HfC-SiC/graphite ceramics
Liuyi Xiang, Laifei Cheng, Fuyuan Wang, Litong Zhang
Ethanol vapour sensing property of nitrogen doped ZnO fabricated by spray pyrolysis
A. V. Patil, S. B. Handge, C. G. Dighavkar, R. N. Shelar, D. R. Patil
Temperature effect for friction and wear characteristics of solid lubricating graphite
Yeonwook Kim, Jaehoon Kim, Sunghan Park, Hwangyu Lee
32
Program and Abstract Book for 7th International Conference AMDP 2014
July 19
Chair: Tae-Gyu Kim
09:0009:30
09:3010:00
Plenary speech 3 : Prof. Hyoung Jin Cho, USA
Title : Liquid actuators based on electrocapillary and thermocapillary
Plenary speech 4 : Dr Hajime Sakakita, AIST, Japan
Title : Industrial applications using innovative plasma technologies (Developments of the low
energy ion beam, and studies on medical applications)
10:0010:40
Coffee break
Chair: Xiaomeng Fan,
10:4011:00
11:0011:20
C201
C202
Co-Chair: Min Hyeok Park
Dominant variables for hardening of axle shaft through high frequency induction heating
Min Hyeok Park, Jin Kyu Choi, Kwang Sik Nam, Dong Uk Lee, Seok Soon Lee
Research for anti-corrosion multi layer coating based on diamond-like carbon and anodic
aluminum oxide
Tae Ho Kang, Hyun Cho, Jin Kon Kim, Tae Gyu Kim
11:2011:40
C203
11:4012:00
C204
Ablation performance of high thermally conductive C/SiC-Ti3SiC2 composites under arc-heated
wind tunnel
Xiaomeng Fan, Xiaowei Yin, Laifei Cheng, Litong Zhang
12:0015:00
The microstructure and compositions of Al based anode for lithium ion battery before and after discharge
Kelimu Tulugan, SunChul Huh, YongBum Choi, WonJo Park
Poster session & Lunch time
Chair: Kelimu Tulugan,
15:0015:20
C205
15:2015:40
C206
15:4016:00
C207
16:0016:20
C208
19:00
Co-Chair: Min-Soo Suh
(Invited Talk) Fatigue and material characteristics of a hot-formed AZ31 magnesium alloy
Chang Min Suh, Kwang Ho Hor, Min Soo Suh, Seung Hoon Nahm
Erosion resistance and degradation mechanism of SiC/SiC composites
Min-Soo Suh, Chang-Min Suh, Tatsuya Hinoki, Akira Kohyama, Se-Young Kim, In-Sub Han
Experimental investigation on the behavior of hollow GFRP pipes subjected to transverse impact
D. X. Xiong, T. Y. Wang, J. Y. Richard Liew
Analysis of the hot deformation behavior of 40CrMo8 alloy for the large-solid-type crankshafts
Sang Kyun Oh, Rag Gyu Lee, Yun-Chul Jung, Jae Gyu Yang, Young Suk Kim
Banquet
33
Program and Abstract Book for 7th International Conference AMDP 2014
July 20
Chair: Jun-Cai Sun
09:0009:30
09:3010:00
10:0010:30
Plenary speech 5 : Prof. Ri-ichi Murakami, National Taiwan University of Science and
Technology, Taiwan
Title : Effect of spacer layer on enhancement and quenching of photoluminescence by surface plasmon
Plenary speech 6 : Prof. Mahendra A. More, University of Pune, India
Title : Carbon based nanostructures and nanocomposites as supercapacitors: a brief review
Plenary speech 7 : Prof, Yun-Hae Kim, KMOU, Korea
Title : Application of composite materials to the maritime and ocean
Chair: Hansang Kwon,
10:5011:10
C301
11:1011:30
C302
11:3011:50
C303
11:5012:10
C304
12:3013:00
Co-Chair: Hiroshi Fukutomi
Mechanical performance of carbon nanotube-reinforced nanocomposites
Hansang Kwon, Marc Leparoux, Kwangil Hwang, Junho Choi, Kwonhoo Kim
Texture formation behaviors in AZ80 magnesium alloy during high-temperature plane strain compression
Kwon Hoo Kim, Jun Ho Choi, Kwang Il Hwang, Han Sang Kwon, Kazuto Okayasu, Hiroshi Fukutomi
Closing ceremony
34
Program and Abstract Book for 7th International Conference AMDP 2014
Event Room D : Chemical materials and Concrete materials
-Room No. 450 (D1 building)-
July 18
Registration open
08:00
Chair: M.A. More,
09:0009:20
Co-Chair: Vijaya Sangawar
Keynote speech : Professor T. Moriga, The University of Tokushima, Japan
09:2009:40
D101
09:4010:00
D102
10:0010:20
D103
(Invited Talk) Field Electron emission characteristics of plasma treated carbon nanotubes
Pankaj M. Koinkar, Daisuke Yonekura, Toshihiro Moriga, Ri-ichi Murakami and, Mahendra A. More
Effect of plasticizer PEG on LDPE and its biodegradation
Vijaya Sangawar, Amit Gadre, Ganesh Yerawar
Cytotoxicity assessment of SH-SY5Y cells grown on graphene sheet
Hong Gi Oh, Hyo Geun Nam, Kwang Hwan Jhee, Joon Mook Lim, Kwang Soup Song
10:20
10:40
Coffee break
10:4011:10
Opening Ceremony
Chair: Yun-Hae Kim
Plenary speech 1 : Prof. Hong-Kyu Lee, KAIST, Korea
Title : Idea Factory: A Meaningful Driver for Engineering Education
11:1011:40
Plenary speech 2 : Prof. Jitai Niu, Harbin Institute of Technology, China
11:4012:10 Title : Vacuum brazing of high volume fraction SiC particles reinforced aluminum matrix composites
12:1013:20
Lunch break
Chair: Masashi Kurashina,
13:2013:40
D104
13:4014:00
D105
14:0014:20
D106
14:2014:40
D107
14:4015:00
Co-Chair: Dipak T. Tayade
(Invited Talk) Removal of borate by coprecipitation with Mg/Al layered double hydroxide
Masashi Kurashina, Tatsuki Inoue, Chihiro Tajima, Eiji Kanezaki
Effect of aging method on adsorption and elution of phosphate in Mg/Fe layered double hydroxide
Yuki Ogawa, Masashi Kurashina, Eiji Kanezaki, Takashi Yamamoto
Study in the interferometric measurements of newly synthesized thiocarbamidophenols
D. T. Tayade, N. J. Meshram
Investigation of strength development properties of recycled aggregate mortar with mineral fine powders
Teppei Nagano, Hiromi Aoi ,Chikanori Hashimoto, Takeshi Watanabe
Coffee break
Chair: Pankaj Koinkar Co-Chair: Ujwal D. Patil,
15:0015:20
D108
15:2015:40
D109
15:4016:00
D110
16:0016:20
D111
(Invited Talk)Spin coated unsubstituted copper phthalocyanine thin films for nitrogen dioxide sensors
Sanjay Chakane, Ashok Datir, Pankaj Koinkar
Synthesis and biological study of
2-( 5-aryl-4,5-dihydro-1-substituted-pyrazol-3-yl )-substituted-naphthalene-1-ol
Subodh Bhandarkar, Bhavana Khobragade, Vivek Raut
Synthesis and applications of smart hydrogels
A.R.Raut, S.R.Khairkar
Solution spray controlled polymorph selective synthesis of lead chrome nanocrystals
Ujwal D. Patil, Virendra J. Patil, Ravindra D. Kulkarni
35
Program and Abstract Book for 7th International Conference AMDP 2014
July 19
Chair: Tae-Gyu Kim
09:0009:30
09:3010:00
Plenary speech 3 : Prof. Hyoung Jin Cho, USA
Title : Liquid actuators based on electrocapillary and thermocapillary
Plenary speech 4 : Dr Hajime Sakakita, AIST, Japan
Title : Industrial applications using innovative plasma technologies (Developments of the low
energy ion beam, and studies on medical applications)
10:0010:40
Coffee break
Chair: S. S. Veer,
10:4011:00
D201
11:0011:20
D202
11:2011:40
D203
11:4012:00
D204
Co-Chair: Takayoshi Maruyama
Resistance performance of concrete using both blast furnace slag cement and fly ash against
chloride attack and carbonation
Kenta Miura, Takao Ueda, Masayuki Tsukagoshi
12:0015:00
Corrosion rate of steel in fly ash concrete containing chlorides
Keiji Miyata, Takao Ueda, Masayuki Tsukagoshi
Effect on the flow properties of the mortar using micro-nano bubbles
Takayoshi Maruyama, Naoya Takahashi, Shinichiro Hashimoto, Shigeyuki Date
Local oxidation nano-lithography on sheet of silver nano particles
Pangpang Wang, Koichi Okamoto, Kaoru Tamada
Poster session & Lunch time
Chair: Takesh Watanabe, Co-Chair: Chikanori Hashimoto
15:0015:20
D205
15:2015:40
D206
15:4016:00
D207
16:0016:20
D208
19:00
(Invited Talk) Evaluation of shrinkage and cracking in concrete by ring test
Takeshi Watanabe, Akiyuki Fukase, Chikanori Hashimoto
Evaluation for filling behavior of fresh concrete by coupled analysis in granular and fluid model
Katsuya Hara, Chikanori Hashimoto, Takeshi Watanabe
Study on vibration properties of fresh concrete with simple test method
Yuji Yamada, Shin-ichiro Hashimoto, Chikanori Hashimoto
Composition and property evaluation of SrTiO3 used as a thermoelectrical conversion material
Kento Hirata, Tatsuya Miki, Toshihiro Moriga, Kei-ichiro Murai
Banquet
36
Program and Abstract Book for 7th International Conference AMDP 2014
July 20
Chair: Jun-Cai Sun
09:0009:30
09:3010:00
10:0010:30
Plenary speech 5 : Prof. Ri-ichi Murakami, National Taiwan University of Science and
Technology, Taiwan
Title : Effect of spacer layer on enhancement and quenching of photoluminescence by surface plasmon
Plenary speech 6 : Prof. Mahendra A. More, University of Pune, India
Title : Carbon based nanostructures and nanocomposites as supercapacitors: a brief review
Plenary speech 7 : Prof, Yun-Hae Kim, KMOU, Korea
Title : Application of composite materials to the maritime and ocean
Chair: D. P. Garud,
10:5011:10
D301
11:1011:30
D302
11:3011:50
D303
12:3013:00
Co-Chair: Pangpang Wang
(Keynote speech) Metal nanoparticle decorated of organic conducting polymer functionalized
single wall carbon nanotubes: highly selective sensing platform
Mahendra D. Shirsat
Continuous maskless fabrication process for ~200 nm pattern
Moon Kyu Kwak, Cheol Woo Park, Choon Young Lee, Hwang Kwang-Il, Hoon Eui Jeong, Jun Ho Choi
Closing ceremony
37
Program and Abstract Book for 7th International Conference AMDP 2014
Event Room E: X-ray analysis & Evaluation & Sensors and Biomedical applications
-Room No. 426 (D1 building)-
July 18
Registration open
08:00
Chair: Masayuki Nishida,
Co-Chair: Xiaoshan Fan
09:00Keynote speech: Professor S. H. Chiu, National Taiwan University of Science and Technology, Taiwan
09:20
(Invited Talk) In-situ stress measurement of fiber reinforced composite in low temperature state
09:20E101 by neutron diffraction
09:40
Masayuki Nishida, Tian Jing, M. Refai Muslih, Tatsuya Matsue, Takao Hanabusa
09:4010:00
E102
10:0010:20
E103
10:20
10:40
10:4011:10
Characterization of crystal orientation of ZnO films deposited by direct current and radio frequency sputtering
Yutaka Maruoka, Kazuya Kusaka
Epoxide-modified SiO2@epoxy nanocomposite for enhanced mechanical properties
Du Yuan, Xiwen Zhang, Xiaoshan Fan, Chaobin He
Coffee break
Opening Ceremony
Chair: Yun-Hae Kim
Plenary speech 1 : Prof. Hong-Kyu Lee, KAIST, Korea
Title : Idea Factory: A Meaningful Driver for Engineering Education
11:1011:40
Plenary speech 2 : Prof. Jitai Niu, Harbin Institute of Technology, China
11:4012:10 Title : Vacuum brazing of high volume fraction SiC particles reinforced aluminum matrix composites
12:1013:20
Lunch break
Chair: Masayuki Nishida,
13:2013:40
E104
13:4014:00
E105
14:0014:20
E106
14:2014:40
E107
Co-Chair: Ashok Datir
(Invited Talk) Leaching of metals from steel samples by peracetic acid
Tomoki Yabutani, Takamasa Nakamura, Toshio Takayanagi
Effects of heat annealing on the gas sensing properties of spin coated unsubstituted copper
phthalocyanine films
Ashok Datir, Pankaj Koinkar, Sanjay Chakane
Micro residual stress development within Al tri-crystal after plastic deformation
Takao Hanabusa, Masayuki Nishida, M. Refai Muslih, Tatsuya Okada
Hydrophobic effect on electrodeposition of billirubin oxidase Cot A
Toshio Watanabe, Yohei Yamada, Haruhiko Sakuraba, Mikito Yasuzawa, Toshio Takayanagi,
Tomoki Yabutani
14:4015:00
Coffee break
Chair: ,
15:0015:20
E108
15:2015:40
E109
15:4016:00
E110
16:0016:20
E111
Co-Chair:
38
Program and Abstract Book for 7th International Conference AMDP 2014
July 19
Chair: Tae-Gyu Kim
09:0009:30
09:3010:00
Plenary speech 3 : Prof. Hyoung Jin Cho, USA
Title : Liquid actuators based on electrocapillary and thermocapillary
Plenary speech 4 : Dr Hajime Sakakita, AIST, Japan
Title : Industrial applications using innovative plasma technologies (Developments of the low
energy ion beam, and studies on medical applications)
10:0010:40
Coffee break
Chair: R.N. Shelar,
10:4011:00
E201
11:0011:20
E202
11:2011:40
E203
11:4012:00
E204
Co - Chair: Changhae Pak
Magnetic properties of LSMO-BT magnetoelectric composites
Shivaji Shamrao Veer , Sanjay Dnyaneshwar Chakane
Preparation of micro-biosensor for continuous glucose monitoring
Mikito Yasuzawa, Taketo Toba, Kentaro Hiura, Jiang Li, Yusuke Fuchiwaki
Formulation and characterization of CuO doped ZnO screen printed films as LPG sensor at room temperature
C.G.Dighavkar, R.N. Shelar, S.B.Handge, A.V.Patil, S.K. Sonawane
Effect of temperature on optical and photovoltaic properties of nc-TiO2 thin films for dye sensitized solar cell
M. T. Sarode, Y. B. Khollam, S. R. Jadkar, B. B. Kale and K. C. Mohite
12:0015:00
Poster session & Lunch time
Chair: Kishor Sonawane,
15:0015:20
E205
15:2015:40
E206
15:4016:00
E207
16:0016:20
E208
19:00
Co-Chair:
M.T. Sarode
A conducting polyaniline nanowires micro electrode junction (CPNEJ) sensor for detection of glucose
Mahendra D. Shirsat, Pankaj Koinkar, Yun-Hae Kim, Ashok Mulchandani
Synthesis and study of morphological, electrical and optical properties of AZO nanorods
R.R. Kothawale, R.M. Mohite
Ultrasonic cure monitoring of GFRP laminates
Changhae Pak, Akihiro Wada, Eiji Kitagawa, Yuki Sasaki
Polypyrrole nanostructures and their field emission Investigations
Kashmira Harpale, Kishor M. Sonawane, Pankaj M. Koinkar, Mahendra A. More
Banquet
39
Program and Abstract Book for 7th International Conference AMDP 2014
July 20
09:0009:30
09:3010:00
10:0010:30
Plenary speech 5 : Prof. Ri-ichi Murakami, National Taiwan University of Science and
Technology, Taiwan
Title : Effect of spacer layer on enhancement and quenching of photoluminescence by surface plasmon
Plenary speech 6 : Prof. Mahendra A. More, University of Pune, India
Title : Carbon based nanostructures and nanocomposites as supercapacitors: a brief review
Plenary speech 7 : Prof, Yun-Hae Kim, KMOU, Korea
Title : Application of composite materials to the maritime and ocean
Chair:
Co-Chair:
10:5011:10
11:1011:30
11:3011:50
11:5012:10
12:3013:00
Closing ceremony
40
Program and Abstract Book for 7th International Conference AMDP 2014
Event Room F: Surface and interface analyses of materials
-Room No. 436 (D1 building)-
July 18
Registration open
08:00
Chair: Taewan Do,
09:0009:20
09:2009:40
09:4010:00
10:0010:20
Co-Chair: R.R. Kothawale
Keynote speech: Dr. Jae-Ho Kim, AIST, Japan
F101
F102
F103
Influence of surface roughness of steel plate on self-assembly behavior of silica particles
Takashi Yonezawa, Daisuke Yonekura, Ri-ichi Murakami
Constitutive equation of NBR and influence of deterioration to mechanical properties
Yuma Otsuka, Fumiko. Kawashima, A. Ota, Y. Miyazaki
Fundamental study on thermal contact resistance between contact surfaces under low contact pressure
Taewan Do, Kensei Shigyo, Toshio Tomimura, Yasushi Koito
10:20
10:40
Coffee break
10:4011:10
Opening Ceremony
Chair: Yun-Hae Kim
Plenary speech 1 : Prof. Hong-Kyu Lee, KAIST, Korea
Title : Idea Factory: A Meaningful Driver for Engineering Education
11:1011:40
Plenary speech 2 : Prof. Jitai Niu, Harbin Institute of Technology, China
11:4012:10 Title : Vacuum brazing of high volume fraction SiC particles reinforced aluminum matrix composites
12:1013:20
13:2013:40
Lunch break
Chair: Hyun Cho,
Co-Chair: Jun Komotori
(Invited Talk) Surface modification for metal using a newly developed AIH-FPP
F104 system
13:4014:00
F105
14:0014:20
F106
14:2014:40
14:4015:00
F107
Jun Komotori
Influence of alkali concentration on morphology and tensile properties of abaca fibers
Ming Cai, Hitoshi Takagi, Antonio N. Nakagaito, Kazuya Kusaka, Masahiro Katoh, Yan Li
High density plasma etching of ultrananocrystalline diamond film in O2/CF4 and O2/SF6 Inductively
coupled plasmas
Jong Cheon Park, Seong Hak Kim, Tae Gyu Kim, Jin Kon Kim, Byeong Woo Lee, Hyun Cho
A study on algorithm for image processing in weld seam tracking by the modified hough algorithm
Jong-Pyo Lee, Qian-Qian Wu, Min-Ho Park, Cheol Kyun Park, Ill-Soo Kim
Coffee break
Chair: Mamoru Takahashi,
15:0015:20
F108
15:2015:40
F109
15:4016:00
F110
16:0016:20
F111
Co-Chair: Daisuke Yonekura
Thermo-oxidative degradation behavior of gasket rubber sheet with SiON gas barrier film
Naoya Kusumoto, Koji Takashima, Daisuke Yonekura, Ri-ichi Murakami
Influence of nitrogen pressure during TiN deposition process on photocatalytic properties of
oxidized TiN film
Yoichiro Tashiro, Daisuke Yonekura, Ri-ichi Murakami
Effect of environment on Sn whisker growth during welding of electronic wires
Tomomi Sakakida, Tatsuo Kubouchi, Yasuyuki Miyano, Mamoru Takahashi, Osamu Kamiya
Effect of nitrogen addition on synthesis of nanocrystalline diamond films on tungsten carbide substrate by
flame combustion method using high-purity acetylene
Mamoru Takahashi, Osamu Kamiya
41
Program and Abstract Book for 7th International Conference AMDP 2014
July 19
Chair: Tae-Gyu Kim
09:0009:30
09:3010:00
Plenary speech 3 : Prof. Hyoung Jin Cho, USA
Title : Liquid actuators based on electrocapillary and thermocapillary
Plenary speech 4 : Dr Hajime Sakakita, AIST, Japan
Title : Industrial applications using innovative plasma technologies (Developments of the low
energy ion beam, and studies on medical applications)
10:0010:40
Coffee break
Chair: Kazue Murai,
10:4011:00
F201
11:0011:20
F202
11:2011:40
F203
11:4012:00
F204
Co-Chair: Daisuke Yonekura
(Invited Talk) Surface modification of medium carbon steel by electron beam alloying
Daisuke Yonekura, Kohei Iida, Ri-ichi Murakami
Influence of soldering condition on bonding strength of lead-free solder and glass substrate by
ultrasonic assisted soldering method
Hiroki Komae, Daisuke Yonekura, Toshio Wakabayashi, Ri-ich Murakami
Effect of induction-heating process on Cr diffused layer generated by AIH-FPP
12:0015:00
Kazue Murai, Shumpei Ota, Masaki Omiya, Jun Komotori, Kengo Fukazawa, Yoshitaka Misaka,
Kazuhiro Kawasaki
Poster session & Lunch time
Chair : Keiji Minagawa, Co-Chair : Mikito Yasuzawa
15:0015:20
F205
15:2015:40
F206
15:4016:00
F207
16:0016:20
F208
19:00
Controlled physical gelation of thermoresponsive poly(2-propionamidoacrylic acid) aqueous solution
Keiji Minagawa, Genki Shiizaki, Yukihiro Arakawa, Yasushi Imada, Masami Tanaka
Stabilization of enzyme-immobilized film prepared using electrodeposition procedure
Kentaro Hiura, Jiang Li, Yusuke Fuchiwaki, Mikito Yasuzawa
Evaluation of surface property of carbon steel treated by AIH-FPP using Cr particle
Koji Kobayashi, Kenta Ueyama, Kazue Murai, Hiroyuki Akebono, Jun Komotori, Atsushi Sugeta,
Hirorou Nomura
Banquet
42
Program and Abstract Book for 7th International Conference AMDP 2014
July 20
Chair: Jun-Cai Sun
09:0009:30
09:3010:00
10:0010:30
Plenary speech 5 : Prof. Ri-ichi Murakami, National Taiwan University of Science and
Technology, Taiwan
Title : Effect of spacer layer on enhancement and quenching of photoluminescence by surface plasmon
Plenary speech 6 : Prof. Mahendra A. More, University of Pune, India
Title : Carbon based nanostructures and nanocomposites as supercapacitors: a brief review
Plenary speech 7 : Prof, Yun-Hae Kim, KMOU, Korea
Title : Application of composite materials to the maritime and ocean
Chair: S. S. Veer,
10:5011:10
F301
11:1011:30
F302
Co-Chair: Ji-Woon Lee
(Invited Talk) LPG and NH3 sensing characteristics of DC electrochemically deposited Co3O4 films
P. N. Shelke, Y. B. Khollam, S. D. Gunjal, P. M. Koinkar, S. R. Jadkar, K. C. Mohite
Fabrication of Lotus-type Porous Copper by Centrifugal Casting
Ji-Woon Lee, Yun-soo Lee, Soong-Keun Hyun
Influence of concentration of gold nanoparticles solution on optical and electrical properties of
11:3011:50
F303
self-assembled films
Yusuke Skakguchi, Daisuke Yonekura, Ri-ich Murakami
11:5012:10
12:3013:00
F304
Fatigue properties of Ti-6Al-4V alloy with Cr/CrN multilayer
Kouhei Miki, Junki Fujita, Daisuke Yonekura, Ri-ichi Murakami
Closing ceremony
43
Program and Abstract Book for 7th International Conference AMDP 2014
Event Room G: Marine technology, Green Innovation
-Room No. 259 (D1 building)-
July 18
Registration open
08:00
Chair: Kwang-il Hwang,
09:0009:20
Co-Chair: Woo Hyeong Lee
Keynote speech: Professor Jun-Cai Sun, Dalian Maritime University, China
09:2009:40
G101
09:4010:00
G102
10:0010:20
G103
(Invited Talk) Performance evaluation of sea water heat exchanger installed in submerged
concrete structure of pontoon
Kwang-il Hwang, Young-Hoon Sim, Byeol Kim
Experimental investigation on the flow structure characteristics around island slit wall in an algae
pond channel
Woo Hyeong Lee, Yeon Ho Lee, Haider Ali, Moon Kyu Kwak, Cheol Woo Park
The study on the performance of the shape and position of the air-liquid ejector diffuser
J.W. Jang, M.W. Kim, W.H.Shin, Y.C. Park
10:20
10:40
Coffee break
10:4011:10
Opening Ceremony
Chair: Yun-Hae Kim
Plenary speech 1 : Prof. Hong-Kyu Lee, KAIST, Korea
Title : Idea Factory: A Meaningful Driver for Engineering Education
11:1011:40
Plenary speech 2 : Prof. Jitai Niu, Harbin Institute of Technology, China
11:4012:10 Title : Vacuum brazing of high volume fraction SiC particles reinforced aluminum matrix composites
12:1013:20
Lunch break
Chair: Heyung-Sik Choi,
13:2013:40
G104
13:4014:00
G105
14:0014:20
G106
14:2014:40
G107
Co-Chair: Joon-Young Kim
(Invited Talk) Development of hovering AUV test-bed 'octagon'
Joon-Young Kim, Seung-Min Hong, Ji-Youn Oh, Heyung-Sik Choi
Development of buoy-based autonomous surface robot-kit
Hyun-Sik Kim
3D basin experiment of floating buildings with moorings for regular wave
Young-Wook Lee, Ji-Yong Chae, Hyuk-Nyeon Kim, Mun-Seup Sin
Modeling and control of an unmanned underwater vehicle using a mass moving system
Seung-Woo Byun, Dong-Hee Kim, Hyeung-Sik Choi,Yun-Hae Kim, Joon-Young Kim
14:4015:00
Coffee break
Chair:
15:0015:20
G108
15:2015:40
G109
15:4016:00
G110
16:0016:20
G111
Co-Chair:
44
Program and Abstract Book for 7th International Conference AMDP 2014
July 19
Chair: Tae-Gyu Kim
09:0009:30
09:3010:00
Plenary speech 3 : Prof. Hyoung Jin Cho, USA
Title : Liquid actuators based on electrocapillary and thermocapillary
Plenary speech 4 : Dr Hajime Sakakita, AIST, Japan
Title : Industrial applications using innovative plasma technologies (Developments of the low
energy ion beam, and studies on medical applications)
10:0010:40
Coffee break
Chair: Leong Keey Seah,
10:4011:00
G201
11:0011:20
G202
11:2011:40
G203
11:4012:00
G204
Co-Chair: Donghee Kim
(Invited Talk) Sea test for motion control of autonomous underwater vehicles with four
independently actuated elevator fins
Donghee Kim, Joon Young Kim, Hyeung Sik Choi, Jong Hyeon Park
12:0015:00
Fatigue behaviour of bismaleimide composite under the influence of sea water absorption
Leong Keey Seah, Yian Zhao, Zhiying Wang
(Invited Talk) The Smart IV Stand Design Though Human Tracking Mobile Robot System by CdS Cell
Seong-HyeonJo,Hong-KyuLee,Jong-HunChoe,Suk-HyunSeo,Won-HoeKim,Ji-EumHyun,JunghyunANNAPark,Se-HoPark
Dynamic modeling and behavior analysis of the underwater glider system with time delay
Joon-Young Kim, Keon-Seok Nam, Ji-Hye Jeon, Hyeung-Sik Choi, Yong-Kuk Lee
Poster session & Lunch time
Chair: Hideaki Katogi,
15:0015:20
G205
15:2015:40
G206
15:4016:00
G207
16:0016:20
G208
19:00
Co-Chair: Hyeung-Sik Choi
Preparation and evaluation of a fine tapered needle type glucose sensor
Jiang Li, Daichi Oyama, Kentaro Hiura, Yusuke Fuchiwaki, Mikito Yasuzawa
Study on underwater wireless communication system using LED
Hyun-Joong Son, Hyeung-Sik Choi, Jihoon Ha, Hee-Young Shin, Daehyeung Ji, Jaehyun Bae
Effect of thermal cycling after water absorption on flexural property of CFRP
Nozomu Iijima, Hideaki Katogi, Kenichi Takemura
Ultrasonic sensor communication system using steel structures in ship
Jaeil Lee, Jinho Bae, Waseem Abbas, Chong Hyun Lee
Banquet
45
Program and Abstract Book for 7th International Conference AMDP 2014
July 20
Chair: Jun-Cai Sun
09:0009:30
09:3010:00
10:0010:30
Plenary speech 5 : Prof. Ri-ichi Murakami, National Taiwan University of Science and
Technology, Taiwan
Title : Effect of spacer layer on enhancement and quenching of photoluminescence by surface plasmon
Plenary speech 6 : Prof. Mahendra A. More, University of Pune, India
Title : Carbon based nanostructures and nanocomposites as supercapacitors: a brief review
Plenary speech 7 : Prof, Yun-Hae Kim, KMOU, Korea
Title : Application of composite materials to the maritime and ocean
Chair: Sun-Chul Huh,
10:5011:10
G301
11:1011:30
G302
11:3011:50
G303
11:5012:10
G304
12:3013:00
Co-Chair: Sung-Gu Hwang
Localization compensation algorithm using the mean kshift and the kalman filter in random
mobility model
Dong Myung Lee, Tae Wan Kim
A study on analysis method of offshore heave compensator
Sung-Gu Hwang, Gwi-Nam Kim, Jang-Hwan Hyeon, Young-Hwan Yoon, Yuong-Gil Jung, Sun-Chul Huh
A study on the stability evaluation of BOP gantry crane
Hyun Ji Kim, Gwi Nam Kim, Chang Kweon Jeong, Yong Gil Jung, Sun Chul Huh
Closing ceremony
46
Program and Abstract Book for 7th International Conference AMDP 2014
Poster Session Schedule
Chair: Yun-Hae Kim
Co-Chairs: Jong-Do Kim and Koinkar Pankaj
Day
: 19 July 2014
Time
: 12:00 to 15:00
Place: Room No. 440 (D1 Building)
Posters: P-001 to P-054
47
Program and Abstract Book for 7th International Conference AMDP 2014
Poster Presentations Schedule
[P001]
Change in the residual stress of the TiN coating material in the heat treatment in an
air atmosphere
Tatsuya Matsue, Masayuki Nishida, Takao Hanabusa
[P002]
Experimental investigation on image-based crack recognition characteristics
Hyun-Woo Cho, Hyuk-Jin Yoon, Jung-Jun Park
[P003]
Development of rail covered sensor system embedded with FBG sensor for wheel
weight monitoring
Hyuk-Jin Yoon, Jung-Seok Kim
[P004]
Surface Structure and Emissivity of Aluminum Nitride Films
Masashi Yoshida, Noah Utsumi, Ryuta Ichiki, Jung-Hyun Kong, Masahiro Okumiya
[P005]
Development of Forming Method for Aluminum Alloy Channel with Curvature and
Modified Cross-Section Shape in Rotary Draw Bending
Kosuke Ito, Noah Utsumi, Masashi Yoshida
[P006]
New Model of Hammering Tester at Height "Concrete Pecker Ⅱ"
Kana Tateishi, Saeko Tokuomi, Kazuya Mori
[P007]
Polyamide
11/layered
silicate
nanocomposite
using
polyhedral
oligomeric
silsesquioxane surfactants
Shengqin Wang, Mohit Sharma, Yew Wei Leong
[P008]
Synthesis and characterization of polyurethane/clay nanocomposites
Sin Sau Leng, Xu Jianwei
[P009]
Residual Stress Measurement of Industrial Polymers by X-ray Diffraction
Taisei Doi, Masayuki Nishida, Junichi Ozaki
[P010]
A Series of Remote-Controlled Testing Machines for Vertical Concrete Walls “Rising
Cross”
Yukimasa Yano
48
Program and Abstract Book for 7th International Conference AMDP 2014
[P011]
Effects of Cr and Mo alloying elements on mechanical and tribological properties of
Fe-based bulk amorphous alloys
Beomtaek Jang, Seong-Hoon Yi, Young-In Kim
[P012]
Interaction between drugs and biomedical materials. II. binding position of
diphenhydramine to human serum albumin
Masami Tanaka, Keiji Minagawa, Yukihiro Arakawa, Yasushi Imada
[P013]
Adamantane-Modified Polyurethanes: Effect of Hydroxy Group of Adamantane on
the Properties of Polyurethanes
Ze Ren Lau, Sau Leng Sin, Hong Yan, Jianwei Xu
[P014]
Effects of decarburization and shot peening on low cycle fatigue of boron steel
Sung Du Kang, Chang Hee Suh, Jong Kyu Park, Young Suk Kim
[P015]
Fatigue Crack Growth and Fracture Toughness Properties of 9% Ni steel for LNG storage tank
Young-Kyun Kim
[P016]
Influence of Complex Additives on the Piezoelectric and Dielectric Properties of PZT Ceramics
Byeong Woo Lee, Eon Jong Lee
[P017]
Effects of water absorption and resin particle on interfacial shear strength of
CF/MAPP
Tomoaki Hara, Hideaki Katogi, Kenichi Takemura
[P018]
Polarization Characteristics to Wear Ratio of Anti-fouling Paint
Kyung-Man Moon, Dong-Hyun Park, Jong-Pil Won, Yun-Hae Kim, Tae-Sil Back
[P019]
Characteristics of Inconel 625 Filler Metal Affecting to Weld and Deposited metal
Zones in the case of Welded to Forged Steel for Piston Crown Material
Sung-Yul Lee, Kyung-Man Moon, Jong-Pil Won, Dong-Hyun Park, Yun-Hae Kim,
Jae-Hyun Jeong
[P020]
Observation of Luders Band Propagation during Tensile Testing
Jeongguk Kim
49
Program and Abstract Book for 7th International Conference AMDP 2014
[P021]
Control of Optical Properties of the Perovskite-type LaTiO2N Synthesized with a
Nitriding Additive
Minami Oomune, Narendra G Salda, Takanori Hayashi, Satoshi Kataka, Kei-ichiro
Murai, Geoffrey I N Waterhouse
[P022]
Stable Region and Conductivity of Perovskite-type Sr1-yTi1-xMxO3 (M=Nb, Ta)
Masaki Fujikawa, Yutaro Nomura, Kei-ichiro Murai, Toshihiro Moriga, Masashi Mori
[P023]
High cycle Fatigue characteristics of aluminum alloy by shot peening
KwangKeun Oh, Jae Hoon Kim, Yeon Wook Kim
[P024]
Effect of Cation Nonstoichiometry on Luminescent Properties of Ba3Si6O12N2:Eu2+
type Phosphors
HiroshiFujigaki,IsseiMuguruma,YumaOgita,Kei-ichiroMurai,GeoffreyI NWaterhouse,ToshihiroMoriga
[P025]
Comparison of Plasma Emission Signals with Beam Quality in Fiber and Nd:YAG
Laser Welding
Chang-Je Lee, Jong-Do Kim , Yu-Chan Kim
[P026]
Comparison on Welding Mode Characteristics of Arc Heat Source for Heat Input
Control in Hybrid Welding of Aluminium Alloy
Jong-Do Kim, Moo-Keun Song, So-Young Choi
[P027]
Spectroscopic ellipsometry study on strain evolution of transparent conductive thin
films prepared by sputtering
Keh-moh Lin, Ching-Tsun Hsieh, Wen-Yeong Huang, Yang-Hsien Lee, Chih-kai Hsu
[P028]
Influences of Infrared Heating Technique on Structural and Electrical Properties of
ZnO:In and In2O3:Sn Films by Sol-gel Method
Keh-moh Lin, Ching-pei Liu, Yutaka Sawada
[P029]
High-Temperature Thermal Degradation of Dissimilar Metal Welds for Reactor
Pressurized Vessels
WonsikKong, Seung-Pyo Hong, Chungseok Kim
[P030]
The Study on Jacket Type Substructure Design for 5MW Offshore Wind Power
Min-Young Sun, Byoung-Young Moon, Sung-Bum Lee
50
Program and Abstract Book for 7th International Conference AMDP 2014
[P031]
Compressive Fracture Behavior of ATJ Graphite Material at Elevated Temperature
Hoonseok Choi, Jaehoon Kim, Soon-il Moon
[P032]
Deposition of IGZO or ITZO thin films by co-sputtering of IZO and GZO or ITO targets
Xinzhi Wang, Masaya Nishimoto, Toru Fujii, Kikuo Tominaga, Kei-ichiro Murai, Toshihiro Moriga
[P033]
Electrical and Optical Properties of ZnO/Ag/ZnO Thinfilm on Flexible Substrate with Various
Deposition Temperature
Yun-Hae Kim, Jin-Woo Lee, Kyung-Man Moon
[P034]
Displacement Measurement Using Fiber-optical Common-path Interferometry
Seok-soon Lee, Dong-wook Lee, Min-hyeok Park, Jin-gyu Choi, Kwang-sik, Nam Zhao Shang
[P035]
Fatigue crack growth and fracture toughness properties of 9% Ni steel for LNG storage tank
Young-Kyun Kim, Young-Chul Yang, Jae-Hoon Kim
[P036]
A Study on the Weldability of INCOLOY825 Alloys and STS316L Alloys
Pyung-Su Kim, So-Young Choi, Young-Sik Kim, Jong-Do Kim
[P037]
Electrical and Optical Properties of ZnO:Ag Thinfilms Depend on Lamination Forms by DC
Magnetron Sputter
Yun-Hae Kim, Jin-Woo Lee, Chang-Wook Park, Jin-Cheol Ha and Kyung-Man Moon
Study of Thermoelectric Properties of Ca-doped LaCoO3
[P038]
Kei-ichiro Murai, Ken Nagai, Masaru Takahashi, Shosuke Takakusa, Toshihiro Moriga
[P039]
Composition and Property Evaluation of SrTiO3 used as a Thermoelectrical Conversion Material
Kento Hirata, Tatsuya Miki, Toshihiro Moriga, Kei-ichiro Murai
[P040]
The Characterization of Discontinuous Carbon Fiber Mat Reinforced Epoxy Composite Materials
Eun Soo Lee, Daniel Buecher, Si Hoon Jang, Dae Young Lim, Ki Young Kim
51
Program and Abstract Book for 7th International Conference AMDP 2014
[P041]
Characterization of transparent ZnO/Al/ZnO multilayer electrodes for the applications in organic
solar cells
Sang Ouk Ryu, Injun Seo
[P042]
Arduino based Analog Clock for Children with Waveform Feedback
Won-Hoe Kim, Suk-Hyun Seo, Hong-Kyu Lee, Jong-Hun Choe, Seong-Hyeon Jo,Ji-EumHyun, Junghyun ANNAPark, Se-Ho Park
[P043]
Development of High Functional Abrasive Materials using by-product for Industrial Application
Mijung, Yoon, Sungmo Seo, Hyunseo Park
[P044]
Design and Manufacture of Robotic Exoskeleton Hands Using 3-D Printer
Jong-HunChoe,Hong-KyuLee,Seong-HyeonJo,Suk-HyunSeo,Won-HoeKim,Ji-EumHyun,JungHyunANNAPark,Se-HoPark
[P045]
A Study on Searching Performance of the Robot for Special Disaster Scenes
Ji-Hyun Kwark, Young-Do Ju
[P046]
Electrospun Metal Nanofiber Grid as High-Performance Transparent Electrode
Zhen-Ning You, Geng-Quan Wang, Jiunn-Hui Lee, Jiunn-Yih Lee
[P047]
Band Structure of Te/Si(100)2×1 surface
H. S. Jeong, Y. U. Cho, J. P. Lee, J. S. Kim and H. J. Kim
[P048]
A study on laser weldability of Al-Si coated boron steel according to hot-stamping heat
treatment
Jong-Do Kim, So-Young Choi, Moo-Keun Song
52
Program and Abstract Book for 7th International Conference AMDP 2014
Acknowledgements
The organizing committee acknowledges the outstanding efforts of all those who have
contributed their valuable time in ensuring high quality technical papers for AMDP 2014.
We would like to extend our heart-felt thanks to your participation in this conference,
particularly those who have traveled far to our city. We would like to thanks to all faculty
members of the Faculty of Engineering, Korea Maritime and Ocean Univ.ersity who has given
their time in making the conference successful.
Appreciation also goes to all parties who have contributed to the success of AMDP2014. Finally,
AMDP2014 Committee wishes to express their gratitude to the sponsoring companies and
institutions that have supported the conference financially and helped in one way or another
to make this conference a success.
★ Korea Maritime and Ocean Univ.ersity
★ KMOU Research Institute of Maritime Technology
★ KMOU Research Institute of Industrial Technology
★ The Korean Society of Ocean Engineers
★ Busan Tourism Organization
★ Best F.A. Co., Ltd.
★ Dongdo Basalt Ind. Co., Ltd.
★ Daedongsa. Co., Ltd.
★ Ienteco., Ltd.
★ Platec. Co., Ltd.
53