Specifications are subject to change without notification

advertisement
FARINO R
Specification
FARINO R brings new styling to high performance
floodlighting. Its compact size permits unobtrusive
highlighting of facades or architectural elements.
Soft-cornered cylindrical cast aluminum housing and ballast
enclosure, connected by an articulating joint, ensure optimal
thermal conditions. Joint allows housing to be adjusted
± 60° horizontally and ± 90° vertically. Lens frame with
bonded tempered glass lens is secured with a single captive
screw for easy relamping. Optical systems include four
rotationally symmetrical reflectors for precise illumination.
Optical systems are constructed of high reflectance, specular
anodized aluminum. Internal shielding elements result in
controlled illumination and reduced brightness. FARINO
canbe pole, wall, or ground mounted to suit a variety of site
conditions. All hardware is stainless steel. Standard colors;
matte silver grey metallic, graphite, or black.Special colors
available. A full range of optional accessories include spread
lens, lens guard and color filters. Remote ballast option is
available.
Model
FN280
Watt
70
Lamp
Distribution
MH - Metal Halide S05 - 5° x 5° Symmetric
150
Volt
Mounting
2 - 120 G - Ground Mount
Finish
SG - Silver Grey
Option
SL - Spread Lens
S10 - 10° x 10° Symmetric 7 - 277 DW - Direct to Wall GG - Graphite Grey LG - Lens Guard
S20 - 20° x 20° Symmetric
SF - Slipfitter
S35 - 35° x 35° Symmetric
BL - Black
YF - Yellow Filter
CC - Custom Color RF - Red Filter
BF - Blue Filter
GF - Green Filter
N - None
Ordering Information
Specifications are subject to change without notification
HessAmerica > Products > Lighting Products > Floodlights > FARINO R
http://www.hessamerica.com/Products/Lighting/Floodlights/FARINO_R/
Page 1
FARINO R
Specification
HOUSING
Round soft-cornered optical housing and ballast enclosure are cast aluminum. Housings are mechanically joined by an
articulating arm assembly, providing thermal isolation of lamp and ballast components. Cast aluminum doorframe with integral
hinges attaches to housing with concealed hardware. Closed cell silicone gasketing creates a weather-tight seal. Doorframe is
secured to housing with single captive socket head cap screw. Articulating arm assembly, consisting of components precision
machined from high-grade aluminum alloy, allows ± 90° vertical and ± 60° horizontal aiming adjustment. Aiming angle is
preset by hand tightening the precision-machined billet adjustment knob and locked in place with recessed hardware. Housing
mounts to a stainless steel mounting plate and is retained with locator pins and setscrews. All hardware is stainless steel.
OPTICS
Tempered glass lens is 0.25" thick with black screen-printed border. Lens is bonded with silicone to the cast aluminum
doorframe.
Symmetrical Reflector: Round spun aluminum reflector shall have specular anodized finish. Matte black band is press-fit to
the inner perimeter of the reflector and combined with an independent louver assembly consisting of two circular louvers and
center cup for precise light control. Louver assembly is attached to the doorframe and allows access for relamping without
the removal of any reflector or shielding elements. Available distributions are 5°, 10°, 20°, and 35°. Specify distribution and
wattage.
ELECTRICAL
Ceramic metal halide core and coil ballast with class "H" (180°C) insulation system shall have a minimum high power factor
rating of 90% and nominal ballast factor of 1.0. Ballast and starter combination shall be capable of reliable starting to -20°F
(-30°C) at nominal line voltage of ±10%. Ballast, capacitor, and starter are UL and CSA recognized. G12 porcelain socket is
660w-600v, 5kV pulse rated.
LAMP
CDM150/T6/830
CDM70/T6/830
ACCESSORIES
Optional accessories include lens guard, spread lens, and color filters. Color filters are available in red, blue, green, and yellow.
All accessories are offset from the doorframe with field installed mounting hardware (included).
FINISH
Housing is cleaned ultrasonically in detergent bath prior to painting. Standard finish is finely textured matte silver grey
metallic, graphite grey, or black. Special colors available upon request.
CERTIFICATION
UL Listed for Wet Locations
WARRANTY
Limited product warranty period is three years. Lamp and ballast shall carry the respective manufacturer's limited warranty.
Specifications are subject to change without notification
HessAmerica > Products > Lighting Products > Floodlights > FARINO R
http://www.hessamerica.com/Products/Lighting/Floodlights/FARINO_R/
Page 2
Additional information
Dimensions
Specifications are subject to change without notification
HessAmerica > Products > Lighting Products > Floodlights > FARINO R
http://www.hessamerica.com/Products/Lighting/Floodlights/FARINO_R/
Page 3
Download