Click anywhere to continue
TABLE OF CONTENTS
Click
on OF
a section...use
TABLE
CONTENTSred arrow to advance
Adzers
Adzers, Routers
Benders & Straighteners
Rail Benders, Joint Straighteners
Bolters & Track Wrenches
Track Wrenches, Bolters, Impact Wrenches,
Combination Bolter/Drill
Clippers
Clip Applicators & Removers
Drills, Rail
Bonding Drills, Rail Drills
Drills, Tie
Tie Drills, Dual Tie Drills, Portable Drills,
Combination Drill/Bolter
Grinders & Shears
Hand Grinders, Stock Rail Grinders, Gap Slotter,
Corrugation Grinder, Profile Grinders, Switch
Grinder, Web Grinder, Grinding Sets, Weld Shears,
De-Carbonizer, De-Scaler, Grindstones
Heaters
Pullers/Tensors
Saws, Rail
Spike Pullers & Spike Drivers
Tampers
Hydraulic
Crane
Carts, Trollies, &Trailers
1
2
3
4
5
6
7
8
Rail Pullers, Rail Tensors
9
Abrasive Rail Saws, Reciprocating Rail Saws,
10
Abrasive Saw Blades
Spike Pullers, Spike Drivers, Tie Plugger
11
Ballast Tampers, Tie Tampers
12
Full Line of Hydraulic Equipment
13
Geismar 360 & Attachments
14
Various Carts, Trollies, Trailers & Carriers, Rail Trains 15
Pre-Heaters, Rail Knocker, Rail Heaters
Track Laying & Renewal
Gantries, Panel Renewal, Rail/Tie Positioner, Track
Lifting/Slewing, Gauger, Tie Inserters, Ballast
Regulators, Rail Trains, Tie Gangs
Specialized Vehicles
Motor Cars, Catenary Vehicles, General & Special
Use Vehicles
In-Plant Equipment
Rail & Tie Processing Equipment
Instruments & Gauges
Track Level/Gauge, Thermometers, View Finders,
Rail Measuring, Snow Detection, Topometers,
Various Hand-Held Instruments
19
Track Tools
Jacks, Rail Adjusters, Wrenches, Augers/Reamers,
Slewing/Swiveling Bars, Rail/Tie Tongs, Various
Hand Tools
20
Miscellaneous
Lighting, Generators, High Frequency, Rail Loader,
Tie Loader
21
16
17
18
ADZERS
Model #
DN-80
Name
Adzer
Corrects wide gauge
problems. By cutting a strip
in the tie on the gauge side
of the tie plate, the rail can
be moved to the correct
gauge and re-spiked.
Other uses include the
installation of larger tie
plates, shimming, and the
removal of wheel marks
from derailments. The
carrier allows the ties to
be adzed on the field or
gauge side.
Model #
REEN
Name
Re-Adzing
Machine
For conditioning the rail seat
of old ties without removal
and for adzing new ties on
track or in workshop.
Back To Index
RAIL BENDERS/STRAIGHTENERS
Model #
B-40 &
B-60
Name
Hydraulic Rail Bender
Designed for bending and
straightening flat-bottom rails.
These hydraulic rail benders
provide a total bending power of
40 tons or 60 tons respectively.
Model #
JA-40 &
JA-100
Name
Joint Straighteners
Hydraulic rail joint lifting machine designed to
straighten vertically bent joints whether halted
or welded. There is no need to remove the
joint bar while operating. They are fitted with
rail rollers for easy moving from one joint to
another. Model JA-40 straightens bolted
joints on rail up to 95 pounds. Model JA-100
straightens bolted or welded joints on rail that
is more than 95 pounds.
Model #
JC-60
Name
Rail Bender
For straightening of rail end joints
and elbow joints in curves without
removing fish plates. Provides a total
bending power of 60 tons.
Back To Index
RAIL BENDERS/STRAIGHTENERS
Model #
MP-90
Name
Rail Bender
For straightening and
bending of switch points
and rail. Offers 90 tons
of total bending power;
complete with hand pump.
Model #
MP-120
Name
Rail Bender
Horizontal and vertical
bending by means of
inverting jaws. Available
with hand pump, gas
engine, or electric motor.
Back To Index
RAIL BENDERS/STRAIGHTENERS
Model #
VO-406
Name
Horizontal Rail
Benders
Designed to bend or
straighten all types of
flat bottom or grooved
rails. Bends curves and
reverse curves with no
need of turning the rail
or the machine.
Model #
VO-408
Name
Horizontal Rail
Benders
Designed to bend or straighten all
types of flat bottom or grooved rails.
Bends curves and reverse curves
with no need of turning the rail or
the machine.
Back To Index
BOLTERS & TRACK WRENCHES
Model #
MIW-850-S
Name
Portable Impact
Wrench (Gas)
Flexible, lightweight wrench for
use on all track maintenance
bolting applications. Can also
drill up to 1-1/4-inch holes in
wood ties.
Model #
MTM-HIW
Name
Portable Impact
Wrench (Hydraulic)
Flexible, lightweight wrench for
use on all track maintenance
bolting applications.
Model #
BSR-8
Name
Track Wrench
The power to break frozen track
bolts. A torque dial measures up
to 1,800 foot-pounds of torque.
The unit has a forward and
reverse drive, high and low speed,
and a traversing carriage. The bolt
machine and traverse carriage are
easily separated, making offtracking possible by two people.
Back To Index
BOLTERS & TRACK WRENCHES
Model #
T-2002
Name
Dual-Headed Lag
Bolter with
Electronic Control
Designed to meet the
requirements of precise
tightening for elastic vertical
fastenings. Two-headed design
allows a simultaneous tightening
on both sides of the rail.
Model #
TB-2
Name
Lag Bolt/Joint
Fastening Machine
Heavy-duty machine for track
laying and track removal. The
machine is comprised of an engine,
a two-speed clutch-reducer set, a
two-way pivoting head (one
direction for vertical fastenings, the
other for horizontal fastening) and a
trolley with a traversing mechanism.
Model #
TC
Name
Bolter
Compact wrench with high
efficiency for tightening and
unscrewing all vertical fasteners.
Back To Index
BOLTERS & TRACK WRENCHES
Model #
TDY-2
Name
Hydraulic Lagbolt &
Drilling Machine
The TDY-2 offers dual functions in one unit.
Designed for screwing and unscrewing
lagbolts with precision while offering
vertical drilling capability for either wood or
concrete ties. Both the socket and the
auger are fastened to the workhead by
means of a ball-fastening device so that the
tools can be easily and quickly changed.
Model #
TEM-2
Name
Lag Bolt Machine
Provides an economical means
to insert or remove all types of
vertical bolt fasteners.
Model #
TG
Name
Wrench
Lag bolting machine fitted with a
reaming device to clean the lag
bolt housing and prepare for a
new one.
Back To Index
BOLTERS & TRACK WRENCHES
Model #
TMI-2
Name
Bolter
Easy to handle and lightweight.
Provides the torque necessary
for all usual track maintenance
needs.
Model #
TPAS
Name
Lag Bolter
Accurate lag bolter for all screw
type vertical rail fastenings; lag
screws, bolts, and particularly
elastic fastenings.
Model #
TS-2
Name
Lag Bolt Machine
The two-speed TS-2 incorporates
the features of simplicity,
sturdiness and precision. The
head is fixed and suitable for all
types of vertical fastening. It is
fitted with a four-wheel trolley
with a traverse mechanism.
Back To Index
BOLTERS & TRACK WRENCHES
Name
BSR8 & TDY
Accessories
Sockets; Chucks and
Drill Bits
Back To Index
CLIPPERS
Model #
AP-11
Name
Clip Applicator/
Remover Base Unit
A lightweight base unit.
Economical. Light-duty. Various
workheads are available for
different applications.
Model #
AP-21
Name
Clip Applicator/
Remover Base Unit
The base consists of a four-wheel
trolley with traverse carrier.
Various workheads are available
for different applications.
Model #
MEB
Name
Clip Remover
For simultaneous removal of
2 "K" clips.
Back To Index
CLIPPERS
Model #
T1 Workhead for AP-21
T1 workhead installs and
removes one “e” type clip on
concrete ties.
Model #
T2 Workhead for AP-21
T2 workhead installs two “e” type
clips on wood or concrete ties.
Model #
T3 Workhead for AP-21
T3 workhead removes two
“e” type clips on either wood or
concrete ties (must specify).
Back To Index
CLIPPERS
Model #
T4 Workhead for AP-21
T4 workhead is a conventional
rail anchor squeezer.
Model #
T5 Workhead for AP-21
T5 workhead removes two
Safelok clips on concrete ties.
Model #
T6 Workhead for AP-21
T6 workhead installs and
removes two fast clip fasteners
on concrete ties and will also
install 2 Safelok clips on concrete
or wood ties. An adapter for the
T6 workhead is also available
which will allow the installation
of McKay clips.
Back To Index
RAIL DRILLS
Model #
GPD-BONDING
Name
Bonding Drill
Lightweight; rail clamp assembly
and single feed lever permits
drilling in all rail sections; uses
3/8-inch or 9/32-inch bonding bits
in a 1/2-inch Jacob’s chuck.
Model #
PR-3AA
Name
Rail Drill
(Gas, Electric)
Automatic or manual feed; single
speed or 2 speed gear box. Able
to drill through 136-pound rail in
less than one minute.
Model #
PR-7
Name
Rail Drill
Manual feed; single speed;
equipped with a removable
coolant tank and hose for
directing coolant to drill bits.
Back To Index
RAIL DRILLS
Model #
PR-8
Name
Rail Drill
(Gas, Hydraulic,
Electric, High Freq )
Automatic feed; three-speed drill
bit advance; equipped with a
removable coolant tank and hose
for directing coolant to drill bits;
can drill through 136-pound rail in
less than one minute. Single
speed also available.
Model #
PR-H2
Name
Rail Drill
(Hydraulic)
Lightweight; automatic feed;
single speed; uses replaceable
carbide plate drill bits.
Model #
PRUL
Name
Rail Drill
Lightweight; automatic feed;
single speed; uses replaceable
carbide plate drill bits.
Back To Index
TIE DRILLS
Model #
DTD
Name
Dual Tie Drill
Drills two holes simultaneously.
The two drilling heads can
be adjusted to match most
drill patterns.
Model #
PT-8
Name
Tie Drill
The PT-8 is designed for drilling wood
ties prior to spiking. Its many applications
include drilling standard cross ties, switch
ties and pre-drilling for grade crossings.
Fast, lightweight and easily off-tracked
by one person, it comes standard with a
traversing trolley to permit work on both
ends of the tie.
Model #
PTSL
Name
Super Lightweight Drill
High performance and very easy to
handle. Quick setting into operation.
Back To Index
TIE DRILLS
Model #
PTXL
Name
Portable Tie Drill
(Gas, Hydraulic)
Very lightweight yet can carry out all
standard railway drilling requirements.
The PTXL is designed with two telescopic
sheaths and a pneumatic system that
raises the machine at the end of the
drilling operation.
Model #
TDY-2
Name
Combination Lag
Bolter & Drill
The TDY-2 offers dual functions in
one unit. Designed for screwing and
unscrewing lagbolts with precision
while offering vertical drilling
capability for either wood or concrete
ties. Both the socket and the auger
are fastened to the workhead by
means of a ball-fastening device so
that the tools can be easily and
quickly changed.
Back To Index
GRINDERS & SHEARS
Model #
Name
600 Grinders Portable Hand
Grinders
(Flexshaft, Hydraulic)
Three available types:
600W - straight tool holder;
600X - right angle tool holder;
and 600Y - right angle cupstone
tool holder.
Model #
MC-3A
Name
Stock Rail Grinder
(Gas, Hydraulic, Electric,
High Freq Electric)
Grinds frogs, switch points, and stock rails. The
pivoting grinding assembly permits alignment of
the grindstone parallel to stock rail for full
grindstone to rail contact. A flexshaft can be
connected for use of hand tools from the MC-3A’s
power supply. Optional set-off wheel is available.
Model #
MF-7
Name
Portable Utility
Grinder
Lightweight and compact design.
The clutch enables changing
workhead tools without stopping
the engine. Optional set-off
wheels are available.
Back To Index
GRINDERS & SHEARS
Model #
MJ-18
Name
Gap Slotting Machine
For grinding rail ends; lightweight, easily handled, and simple to operate; can be rapidly fastened to the rail by means of a quick acting vise.
Model #
MLC-MK
Name
Stock Rail Grinder
(Flexshaft, Hydraulic)
Llightweight grinder to be outfitted with the
optional workheads. This versatile unit will
handle frog, switch point, stock rail, rail end,
surface, profile, and corrugation grinding
requirements with a simple change of
the workhead.
Model #
MOD-12
Name
Corrugation Grinder
(Gas, Hydraulic)
Consists of a grinding element, two sets of
leveling rollers and a support trolley.
Back To Index
GRINDERS & SHEARS
Model #
MP-5
Name
Profile Grinder
(Flexshaft, Hydraulic)
For finishing thermite welds to a precise
profile. Steel guide wheels provide constant reference for grinding all surfaces of
the rail.
Model #
MP-6
Name
Profile & Switch Grinder
(Flexshaft, Hydraulic, Electric,
High Freq Electric)
The MP-6 is designed to grind all
surface and profile areas of the frog.
Model #
MP-12
Name
Rail Profile Grinder
(Gas, Flexshaft, Hydraulic,
Electric, High Freq Electric)
For re-profiling of railheads after thermite
welding. In the upright position, the machine
can grind the top surface of the rail, and in
the inclined position grind the thickness of
the head to recondition the railhead. A
power take-off is provided for fitting a flexible
shaft for the use of other grinding tools.
Back To Index
GRINDERS & SHEARS
Model #
MS-9-B
Name
Web Grinder
The MS-9 grinder removes all rail
surface scale and dirt to prepare
a clean electrode contact surface.
Model #
EMX
Name
Rail Grinding Set
Designed to carry out most
grinding operations by means of
interchangeable tool holders: rail
head, rail butt end, frog point,
check rail.
Model #
GMSL
Name
Super Lightweight
Grinding Set
Designed for rail finishing
operations on site: profile, rail
web, fishing table, rail ends in
joints, descaling, and for
connection preparation.
Back To Index
GRINDERS & SHEARS
Model #
ESN-2H
ESN- 2M
Name
Weld Shears
The Geismar gasoline-powered
weld shear, Model ESN-2M, trims
excess metal from the rail after
thermite welding, providing a clean,
safe method for quickly dressing
field welds. Shears also are available with hand pump (ESN-2H).
Model #
ESN-MTM-H
Name
Hydraulic Weld
Shears
Designed for precision linear
shearing of thermite rail welds.
The lightweight shears provide
hundreds of cuts without
needing blades re-sharpened.
Hand pump operation.
Model #
Name
ESN-MTM-P Hydraulic Weld
Shears
Designed for precision linear
shearing of thermite rail welds.
This lightweight aluminum shear
provides hundreds of cuts without
needing blades re-sharpened.
Hydraulic powered pump operation.
Back To Index
GRINDERS & SHEARS
Model #
2R
Name
Rail
De-Carbonizing
Machine
For brushing and
de-carbonizing the running
surfaces of both rails of the
track in order to ensure
proper functioning of track
signaling circuits. The
friction generated by the
brush on the rail is the
means for propelling
the unit.
Model #
DK-3
Name
Rail De-scaling Machine
Designed to de-scale and de-oxidize
the rail's upper faces in order to allow
proper operation of the track circuit.
Back To Index
GRINDERS & SHEARS
Name
Grindstones
A variety of consistent, high quality, safety-reinforced grinding
wheels for use with all major manufacturers’ equipment. Zirconium grindstones
are also available.
Back To Index
RAIL HEATERS
Model #
PRE-1
Name
Pre-heater
Designed to pre-heat rail
joints prior to thermit
welding.
Model #
FR
Name
Rail Knocker
Equipped with a four-cycle
gas engine and provides
CWR with resonating
vibrations to facilitate free
elongation of the rails
during the de-stressing
operation. Mounted on a
light trolley, it is easily
controlled by one operator.
Back To Index
RAIL HEATERS
Model #
SH-4
Name
Rail Heater
Equipped with a removable
outrigger arm that can be mounted
on either side of the heater.
Safety features include: an
adjustable flame, a check valve to
regulate the fuel gas pressure, a
relief valve, a pressure gauge, and
an instantaneous emergency
cut-off valve.
Model #
SH-8
Name
Rail Heater
Eight -burner set-up and dual
trolley design allows both
strings of rail to be heated
simultaneously. The SH-8 rail
heater is electrically insulated
from wheel to wheel on each
rail string and from rail to rail.
Model #
SH-12-S
Name
Rail Heater
Self-propelled unit with
12-burner set-up that allows
both strings of rail to be
heated simultaneously.
Back To Index
RAIL PULLERS/TENSORS
Model #
ATR-6
Name
Rail Puller
Designed to bring together two
rails on the same line, the ends
of which are several yards apart.
Model #
ATR-12
Name
Rail Puller
Designed to bring together
two rails on the same line,
the ends of which are
several yards apart.
Model #
ATR-20
Name
Rail Puller
Heavy-duty steel rail puller with
eccentric design, which permits
rapid detachment and removal
from the rail. Adjustable for use
on all rail sections.
Back To Index
RAIL PULLERS/TENSORS
Model #
Name
ATR-20-MPR Rail Puller
Designed to pull two rails
together during new construction
before the rails are fastened
down. Designed to be operated
from the auxiliary valve control
of the MPR.
(Photo shows ATR-6 with MPR)
Model #
ATR-20-H
Name
Rail Puller
Heavy-duty steel rail puller with
eccentric design, which permits
rapid detachment and removal
from the rail.
Back To Index
RAIL PULLERS/TENSORS
Model #
TH-70-VL
Name
Rail Tensors
A 70 ton rail tensor designed to
push or pull the rail for in-track
welding or de-stressing. This
wedge-type portable tensor is
available as hand-operated,
motorized, or complete with a
hydraulic intensifying unit.
Model #
Name
TH-120-SVL Rail Tensors
A 120 ton rail tensor designed to
push or pull the rail for in-track
welding or de-stressing. This
wedge-type portable tensor is
available as hand-operated,
motorized, or complete with a
hydraulic intensifying unit.
Model #
TH-120 Lifting Beam
Back To Index
RAIL SAWS
Model #
MTX-45-S
MTX-50-S
Name
Abrasive
Rail Saw
(Gas, Hydraulic,
Electric (14" only),
High Freq Electric)
MTX-45-S (14-inch) and
MTX-50-S (16-inch); fast,
lightweight, permits the
operator to cut through
136-pound rail in less than
two minutes; patented
turn-around rail vise.
Model #
SRC,
SRN,
SRH
Name
Reciprocating
Rail Saws
Three versions–SRC compact,
SRN normal, and
SRH hydraulic.
Back To Index
RAIL SAWS
Model #
GS MTX-14
GS MTX-16
Name
Abrasive Cutting Discs
Specifically designed for cutting rail; available in 14- and 16-inch diameters. The
cutting discs are fiberglass reinforced for longer life and durability. Zirconium discs
are also available.
Back To Index
SPIKE PULLERS & SPIKE DRIVERS
Model #
AS-3
AS-3M
Name
Spike Puller
Designed to pull the toughest
railroad spike. The operator
can move the machine from
tie to tie or from rail to rail on
the traversing carriage. The
machine can be off-tracked
by the operator. It is also
adaptable for pulling hairpin
spikes. The AS-3M is
provided complete with a
motorized carriage.
Model #
SP-3
Name
Portable
Hydraulic
Spike Puller
Lightweight. Unique
design allows the operator
to actually see the spike
being pulled.
Back To Index
SPIKE PULLERS & SPIKE DRIVERS
Model #
PSD-3
Name
Spike Driver
Hydraulically powered
and off-trackable.
Supplied with a
four-wheel traverse trolley
that enables one-person
operation on both rails.
It is easily off-tracked by
two people.
Model #
SD-1
Name
Portable
Hydraulic
Spike Driver
Lightweight spike driver
featuring an ergonomic
handle. It is suited for a
variety of spike driving
applications.
Back To Index
SPIKE PULLER & SPIKE DRIVERS
Model #
CC-3
Name
Tie Plugger
Designed to drive plugs into (preliminary augered) wood ties.
Back To Index
TAMPERS
Model #
BLH-20,
BLH-10,
BLH-10A
Name
Hydraulic Tamping Units
Single operator units which offer: maximum efficiency
when working perpendicular to the rail, homogeneous
and symmetrical tamping, and good visibility of the
area being tamped, - all without operator fatigue. The
BLH-10A and BLH-20 are both self-propelled units;
additionally the BLH-10A features a two-piece trolley
design, tamping trolley and accessory trolley, while the
BLH-20 is a single, self-contained unit.
Model #
BR-1T
Machine
Name
Ballast Tamping
Features a four-tool, adjustable,
traversing tamping head that tamps
all types of track, including switch ties,
under frogs, and in switch points. It
can be easily and quickly off-tracked
with retractable pneumatic wheels.
Model #
BRM-2
Name
Ballast Tamper
Self-propelled unit with 2 independent
tamping heads located between the
axles. Provides efficient and
homogeneous tamping. Tamping
position can be adjusted to suit
individual and joint ties. It can also
be laterally oriented to tamp most of
the switch area.
Back To Index
TAMPERS
Model #
GB-4
Name
Lightweight Tamper
Set of four tampers operated by a
power plant. Fitted with the proper
blades and tips, the tampers are
suitable for all tamping conditions
(particularly switch points and
crossings) whatever the nature of
the ballast and the lifting height may
be. Can be handled by one person
and quickly removed from the track.
Model #
GHB-2
Name
Lightweight
Hydraulic Ballast
Tamper
Hydraulic set with 2 tamping
bars for tamping track, points, or
crossings. For any type of ties.
Model #
TT-1E
Name
Portable Hydraulic
Tie Tamper
Lightweight, general duty
tamper with ergonomic
anti-vibration handles.
Back To Index
TAMPERS
Model #
VIB-H
Name
Hydraulic
Ballast Tamper
Suitable for spot
maintenance on plain track,
switch points, and crossings
with any type of wooden,
concrete, or steel ties.
Back To Index
HYDRAULIC EQUIPMENT
Model #
600-H
Name
Portable Hand
Grinder
Three available types: 600W straight tool holder; 600X - right
angle tool holder; and 600Y right angle cupstone tool holder.
Model #
DC-5/10
Name
Hydraulic
Power Packs
The DC 5/10 offers hydraulic
power supply to suit most
hydraulic equipment requirements.
The DC 5/10 offers the flexibility of
two ports at 5gpm each or one
port at 10 gpm with either
configuration producing a working
pressure of 2,000 psi.
Model #
DC-5-2
Name
Hydraulic
Power Packs
Hydraulic power supply
to suit most hydraulic equipment
requirements. The DC 5/2’s
compact design delivers
hydraulic power at 5 gpm and
2,000 psi.
Back To Index
HYDRAULIC EQUIPMENT
Model #
ESN-MTM-H
Name
Hydraulic Weld
Shears
Designed for precision linear
shearing of thermite rail welds.
The lightweight shears provide
hundreds of cuts without
needing blades re-sharpened.
Hand pump operation.
Model #
Name
ESN-MTM-P Hydraulic Weld
Shears
Designed for precision linear
shearing of thermite rail welds.
This lightweight aluminum shear
provides hundreds of cuts without needing blades re-sharpened. Hydraulic powered pump
operation.
Model #
HDM
Name
Hydraulic Distribution Manifold
Flow control and distribution system for
portable hydraulic tools. Intended for mobile
equipment applications, the unit is typically
mounted on vehicles that already have
hydraulic systems capable of 10-40 gpm at
2000 psi. The manifold is compact and easy
to mount allowing the operator to use
numerous tool combinations depending on
the manifold design.
Back To Index
HYDRAULIC EQUIPMENT
Model #
HIU
Name
Hydraulic
Intensifying Unit
The HIU provides up to 10,000 psi by boosting
an existing low-pressure input. This permits
the use of a standard pressure (5 gpm) power
unit to operate equipment requiring higher
operating pressures. The HIU is supplied
pre-assembled and ready to work, all the
operator needs is a 5 gpm standard
pressure power source.
Model #
MC-3A-H
Name
Stock Rail Grinder
Grinds frogs, switch points, and stock rails.
The pivoting grinding assembly permits
alignment of the grindstone parallel to
stock rail for full grindstone to rail contact.
Optional set-off wheel is available.
Model #
MLC-H-MK
Name
Stock Rail Grinder
Llightweight grinder to be outfitted
with the optional workheads. This
versatile unit will handle frog, switch
point, stock rail, rail end, surface,
profile, and corrugation grinding
requirements with a simple change
of the workhead.
Back To Index
HYDRAULIC EQUIPMENT
Model #
MP-5H
Name
Profile Grinder
For finishing thermite welds to a precise profile.
Steel guide wheels provide constant reference for
grinding all surfaces of the rail.
Model #
MP-6H
Name
Profile & Switch
Grinder
The MP-6 is designed to grind
all surface and profile areas of
the frog.
Model #
MP-12-H
Name
Rail Profile Grinder
For re-profiling of railheads after thermite
welding. In the upright position, the machine
can grind the top surface of the rail, and in
the inclined position grind the thickness of
the head to recondition the railhead.
Back To Index
HYDRAULIC EQUIPMENT
Model #
MTM-HIW
Name
Portable Impact
Wrench (Hydraulic)
Flexible, lightweight wrench for
use on all track maintenance
bolting applications.
Model #
MTX-45-H
MTX-50-H
Name
Abrasive
Rail Saw
MTX-45-H (14-inch) and
MTX-50-H (16-inch); fast,
lightweight, patented turn-around
rail vise.
Model #
PR-8-H
Name
Rail Drill
Automatic feed; three-speed drill
bit advance; equipped with a
removable coolant tank and hose
for directing coolant to drill bits;
can drill through 136-pound rail
in less than one minute. Single
speed also available.
Back To Index
HYDRAULIC EQUIPMENT
Model #
PR-H2
Name
Rail Drill
(Hydraulic)
Lightweight; automatic feed;
single speed; uses replaceable
carbide plate drill bits.
Model #
PTXL-H
Name
Portable Tie Drill
Very lightweight yet can carry
out all standard railway drilling
requirements. The PTXL is
designed with two telescopic
sheaths and a pneumatic system
that raises the machine at the
end of the drilling operation.
Model #
SD-1
Name
Portable
Hydraulic
Spike Driver
Lightweight spike driver featuring
an ergonomic handle. It is suited
for a variety of spike driving
applications.
Back To Index
HYDRAULIC EQUIPMENT
Model #
SP-3
Name
Portable
Hydraulic
Spike Puller
Lightweight. Unique
design allows the operator
to actually see the spike
being pulled.
Model #
TT-1E
Name
Portable Hydraulic
Tie Tamper
Lightweight, general duty
tamper with ergonomic
anti-vibration handles.
Model #
VIB-H
Name
Hydraulic
Ballast Tamper
Suitable for spot maintenance on
plain track, switch points, and
crossings with any type of
wooden, concrete, or steel ties.
Back To Index
HYDRAULIC EQUIPMENT
Model #
Name
TI Package Track Inspectors Package
Compact design and convenience permit prompt attention to loose track bolts
during routine track inspections.
Back To Index
CRANES
Model #
Name
Geismar 360 On/Off-Track
Crane
A multi-purpose, all-hydraulic, hirail crane designed specifically for
railway needs. This crane operates through 360 degrees of rotation, is on- or off-trackable by its
own means, and features a short tail swing, four-wheel drive, and crab-steering.
A wide variety of attachments permit the crane to be used in rail gangs, tie gangs,
bridge and building work, material yards and ditching applications.
Model #
MB-8-A
Name
Tamping
Attachment
Model #
SLP
PTV-882
Name
Tie Placing/
Spacing Beams
Designed to meet track renewal
needs when track laying with
concrete ties. Self-contained unit
which could be fitted to hydraulic
crane. Can lay 4 ties at a time. The
ties can be set at predetermined
spacings which can be varied by
the operator as required.
Back To Index
CRANES
Name
Attachments
K
C2
C1
I
C
26
1
D
23
2
19
20
24
22
3
25
5
7
8
9
10
4
11
12
13
14
15
16
6
17
18
ACCESSORIES
CCESSORIES (unlimited list)
JIBS
C-Multipur pose jib
C-Multipurpose
C1 with telescopic e
extension
xtension out
C2 with telescopic e
extension
xtension in
I-Front
I-F
ront ffor
ork
k and front b
buc
ucket
et jib
K-jib ffor
or offset e
exca
xcavation
ation
ATT
TTACHMENT
CHMENT P
PAR
ART
D-360 h
D-360º
hydr
ydraulic
aulic rotating unit
1 - Lifting hook
2 - Lifting magnet with generating set
3 - Hydraulic hammer
4 - Utility auger
5 - Brush cutter
6 - Weed mower
7 - Cribbing clam shell
8 - Special cribbing clam shell
9 - Clam-shell bucket
10 - Tie grapple
11 - Rail grapple
12 - Hydraulic beam for concrete ties
13 - Manual chain beam for ties (all types)
Back To Index
14 - Hydraulic beam for concrete ties
15 - V Ditching bucket
16 - Swinging bucket
17 - Ditching bucket
18 - Backhoe bucket
19 - Fork lift
20 - Front end loader bucket
22 - Rotary ditcher
23 - Rotating brush for cleaning
24 - Tamping unit
25 - Hydraulic compactor
26 - Lifting ring
CRANES MINI TIE GANG CONCEPTS
Back To Index
CARTS, TROLLIES & TRAILERS
Model #
CH-1
Name
One Ton Trolley
Light duty trolley featuring
nearly 14 square feet of surface
space with a capacity of up to
1 ton. May be used for the
transportation of tools, small
equipment and materials. The
CH-1 comes equipped with a
hand brake and is also available
with an optional push handle.
Model #
Donelli
Name
Side Tilt Trailer
Model #
LGV
Name
Self-Propelled Light
Maintenance Trolley
Light maintenance self-propelled
trolley to aid with day-to-day track
maintenance. The one-ton capacity
permits the transport of rails, ties
and other track material as required.
Back To Index
CARTS, TROLLIES & TRAILERS
Model #
MA-3, MA-5,
MA-8, MA-10
Name
Material Transport
Trolleys
A wide range of material transport trolleys
in 3-ton, 5-ton, 7.5-ton and 10-ton
capacities are available. All trolleys are
available with steel wheels and steel
platform construction. The 5-ton capacity
trolley is also available in lightweight
aluminum construction. These trolleys are
ideal for a variety of maintenance
requirements including the transportation
of ties, rail, and other track materials.
Model #
MTM-1000, MTM-2000,
MTM-6000, MTM-10000
Name
Rail Carts
Available in 1,000-, 2,000-, 6,000-and
10,000 pound capacities. All are
available in either aluminum or steel
construction. An easily transportable
2,000-pound two-section collapsible
aluminum rail cart is also available.
Model #
MTM-PGC
Name
Personnel Carrier/
Gang Cart
The MTM-PGC features ten comfortable
foam/vinyl seats within its all-steel
construction. Safety features include
individual seat belts and hand brake.
Weather resistant canvas/clear-vinyl
panels can remain opened for air
circulation or can be closed to offer
protection from inclement weather.
Back To Index
CARTS, TROLLIES & TRAILERS
Model #
R.10.BAL
Name
Ballast Hopper
Wagon
Designed for transport and
distribution of ballast where
needed.
Model #
R10TP
R15TP
Name
Trailer with
Tilting Platform
Platform can be tilted four ways
through a central cylinder and a
combination of four lockable
hinges located on all four sides.
Model #
RCS-10000SS
Name
Rail Sprayer
Cart
Back To Index
CARTS, TROLLIES & TRAILERS
Model #
RD-20
RD-30
Name
Rail Transport Dolly
The RD-20 consists of two individual trolleys
hooked in tandem. Each dolly features tow
bar connections (ideal for use with The
Geismar 360 Hi-Rail crane) and air-line
quick-disconnects (for the standard fail-safe
air brakes) at the front and rear of each
dolly. The RD-20’s twenty ton capacity will
support up to twenty 39-foot rails
(136-pound rail).
Model #
TD-20
Name
Tie Dolly
The TD-20 Tie Transport Dolly features
front and rear couplers and is designed
for use with a tie crane for pickup or
distribution of track ties. The TD-20’s
twenty-ton capacity permits up to 150
ties to be transported. Additionally, the
TD-20 features removable corner posts
that can be used as ramps for loading
and transport of small track equipment.
Model #
TR-10, TR-20
Name
Universal Trolleys
Ideal for the transport of rails, assembled
panels, switch points and crossings or any
other material required in MOW work.
Loading capacities for the TR-10 and
TR-20 are 10- and 20-tons respectively.
Both the TR-10 and TR-20 are available
with a platform that can be rendered fully
fixed, sliding and pivoting, sliding only or
pivoting only. Additional models are available for transport of heavy loads with
capacities up to 200 tons.
Back To Index
CARTS, TROLLIES & TRAILERS
Model #
TD-20-DUMP
Name
Dump Trailer
The TD-20-DUMP, is manufactured with a fully
welded tubular steel frame built to railway
gauge with a supporting cross member for
strength. The trailer body is 8-feet wide by 10feet long and boasts a three cubic yard hopper
capacity. The TD-20-DUMP features single
lever dump direction control, dumping is controlled by a powerful four-stage hydraulic cylinder. Four mounting brackets to the TD-20
frame permits easy removal or installation.
Back To Index
CARTS, TROLLIES & TRAILERS
Model #
CWR
Name
Rail Train
Rail trains designed to transport CWR strings in any length. The independent
horizontal and vertical rail rollers permit ease of loading and unloading of the rail.
Back To Index
TRACK LAYING & RENEWAL
Track Laying Gantries
Designed for railway track renewal or
new track construction. It is used to
remove old track panels and renew with
either pre-paneled sections or individual
wood, concrete, or steel ties from
standard flatcars. It can operate on
straight track, curves, levels and grades,
as well as under catenary and inside
tunnels. With one set of gantries, 800
to 1,400 feet of track per hour can be
laid and removed simultaneously,
depending on work site conditions.
Model #
PTH-500
Name
Track Laying Gantries
Back To Index
Model #
PTH-350
Name
Track Laying Gantries
Model #
PTH-700
Name
Track Laying Gantries
TRACK LAYING & RENEWAL
Model #
PEM/LEM
Name
Motorized Lifting Transportation
Trolley with Telescoping Switch
Handling Machine
Motorized trolley for transporting switches and
track panels - no other transportation means is
required. Complete with lifting table to avoid
obstacles along the track by combining slewing
and lifting movements - above all it allows the
straightening of the switch or panel when laying
it from one track.
Model #
PLUMS
Name
Panel Renewal System
For renewal and replacement of turnouts,
crossovers, and sections of track by a set of
handling and carrying machines. The primary
advantage of the system is that relaying can
be carried out without hindrance to traffic or
adjacent tracks, whatever the length and
weight of elements to be relayed.
Model #
PRD-9
Name
Rail & Tie
Positioner
Designed for new track
construction or track renewal.
Simultaneously threads rail on to
ties, spaces ties, and centers
track to correct alignment. Can
also be used to transpose rail.
Back To Index
TRACK LAYING & RENEWAL
Model #
RV-100
Name
Track Lifting & Slewing Machine
20 ton lifting capacity permits the operator to lift
the complete track structure up to 2 feet and align
at 6-inches per throw. The RV-100 can be used to
rough-line the track as well. Can also be used for
the replacement of road crossings.
Model #
MPR
Name
Rail Changer
Designed to meet rail positioning requirements.
The MPR allows the moving of new rail from
embankments onto ties, positioning of running
rails, and track shifting after new rail is fastened
down. When three MPRs are used together rail
transposition can be performed. Options include
a turntable and off-tracking device.
Model #
LRH
Name
Rail Lifter
Three ton capacity hydraulic rail lifter
equipped with hydraulic lifting cylinders along with
hydraulic-operated rail clamps. It is equipped
with separate operating controls on each end
to ensure the safety of the operators and track
personnel involved with its operation. The rail
lifter is also equipped with a rubber-tired set of
wheels for easy off-tracking by one person.
Back To Index
TRACK LAYING & RENEWAL
Model #
LRM
Name
Rail Lifter
Manual rail lifter with
crank lever and ratchet
type lifting.
Model #
PSR
Name
Rail Changer
For lateral and longitudinal
movement of rails of any length.
Model #
SPG-1
Name
Self-Propelled Gauger
Self-propelled hydraulic gauging unit.
When operated in conjunction with the
Geismar Model MPR Hydraulic Rail
Positioner, this gauging attachment
permits one-person gauging operation.
Ideal for use in curve patch gangs,
gauging gangs, and new construction
applications.
Back To Index
TRACK LAYING & RENEWAL
Model #
MRT
Name
Tie Renewer
This medium-capacity Tie Renewer is
suited for work on high-density lines where
on-track time is short. The unit is also
used for tie renewal work in yards or on
secondary lines. Under normal conditions,
50 old ties can be extracted and 50 new
ones inserted per hour. On/off trackable
under own means. An optional kicker
is available.
Model #
PTC
Name
Portable Tie
Remover/Inserter
Designed to remove an old tie in
one piece and insert a new one
into the same spot. About 20 ties
can be changed per hour. The
PTC-2 can handle all types of
track ties, including switch ties.
Model #
RGL
Name
Ballast Regulator
For use by a single operator
through all phases of ballast
regulation when laying ballast
or after tamping.
Back To Index
TRACK LAYING & RENEWAL
Model #
CWR
Name
Rail Train
Rail trains designed to transport CWR strings in any length. The independent
horizontal and vertical rail rollers permit ease of loading and unloading of the rail.
Back To Index
TRACK LAYING & RENEWAL
Name
Mini Tie Gang #1
Model
PSD-3
Hydraulic
Spike
Driver
Model
PSD-3
Hydraulic
Spike
Driver
Model
LRH
Rail
Lifter
Model
Model
MRT-2
MRT-2
Tie
Tie
Changer
Changer
(Replacement) (Removal)
Model
LRH
Rail
Lifter
Model
AS-3
Hydraulic
Spike
Puller
Model
360
High
Rail
Crane
Name
Mini Tie Gang #2
Model
PSD-3
Hydraulic
Spike
Driver
Model
TD-20
Tie
Trolley
Model
360
High
Rail
Crane
Model
PTC
Tie
Change
Boom
Model
AS-3
Hydraulic
Spike
Puller
Name
Mini Tie Gang #3
Model
PSD-3
Hydraulic
Spike
Driver
Model
PTC-2
Tie
Changer
(Replacement)
Model
PTC-2
Tie
Changer
(Removal)
Back To Index
Model
AS-3
Hydraulic
Spike
Puller
SPECIALIZED VEHICLES
Model #
GM
Name
Motor Car
For Lubricating rails
Model #
MTM-202
Name
Motor Car
Carries an eight-person crew. It
features hydrostatic front-wheel drive
for maximum tractive effort and track
speeds up to 42 mph, forward or
reverse. Driver position offers excellent
visibility front and rear. Options include
steel cab, four-wheel drive, gasoline
engine, cold weather insulation
package and others.
Model #
RH-2
Name
Motor Car
2-4 man inspection car.
Back To Index
SPECIALIZED VEHICLES
Model #
VMT P
Name
Motor Car
For transport of personnel. For small crews as well as large ones,
with or without loading platform for transport of equipment and
materials.
Back To Index
SPECIALIZED VEHICLES
Model #
VMT-C
Model #
IC101
Name
Catenary Vehicle
Rail motor car equipped with
inspection platform and equipment
for laying, maintenance, and
inspection of catenary lines.
Model #
TDC
Name
Maintenance Trailer
OHL maintenance trailer with
scissors lift platform
Name
OHL Renewal Train
OHL erection and renewal train.
Back To Index
SPECIALIZED VEHICLES
Model #
IC301
Name
Maintenance Trailer
OHL maintenance trailer with crane and telescopic
elevating platform.
Back To Index
SPECIALIZED VEHICLES
Model #
VMT-CN
Name
Snow Handling
Vehicle
Vehicle equipped with either
rotary snow plows or with snow
blades for track clearing.
Model #
VMT-IOA
Name
Bridge Inspection Vehicle
Versatile bridge and/or tunnel
inspection vehicle. The boom,
outfitted with a personnel basket,
allows for visual inspection of track
and support construction conditions.
Model #
VMT-DEB
Name
Brushcutting
Machine
Maintenance Vehicle outfitted
with the brushcutting attachment
can handle all brushcutting along
the right-of-way.
Back To Index
SPECIALIZED VEHICLES
Model #
VMT-CU
Name
Ditch Cleaning Vehicle
Model #
VMT-DES
Name
Weed Killer
Spraying Vehicle
Model #
Name
VMT PL/GR Maintenance
Vehicle
The VMT PL/GR offers various
equipment configurations including
tilting or fixed platforms with various
loading capabilities and dimensions
for carrying track equipment and
materials. Cranes with numerous
interchangeable accessories are
available.
Back To Index
SPECIALIZED VEHICLES
Model #
VTL
Name
Shunting Locomotive
Capable of starting and towing on the level a train of 600 tons at a
speed of 12 mph.
Model #
W-NHP
Name
High Pressure Washer
Designed for cleaning both rails and track. The high pressure water
jetting and cleaning system is powerful enough to clean most debris
from track surfaces.
Back To Index
IN PLANT
Model #
BR-1, BR-2,
BR-3, BR-32
Name
Running Surface
Brushing Machine
Designed for the continuous brushing of the
running surface of rails, in order to obtain a
perfect acoustic contact of the sounder block
on the rail in the ultrasonic checking station.
Model #
CUW-1-80
Name
Rail Welder Cooling Unit
Designed for cooling of welding machine
circulating water by spray tower with direct
heat exchange between water and air.
Model #
EB60T
Name
Weld Shear
Designed to strip off weld burrs all around
the rail immediately after the flash-butt
welding operations of turnout elements.
Back To Index
IN PLANT
Model #
EPT300
Name
Tie Adzing/
Boring Machine
Heavy duty machine for tie
plants. Up to 300 ties (wood) per
hour can be adzed and drilled.
Includes feeding and evacuation
conveyor synchronized with
machining operations.
Model #
LOS-1
Name
CWR Lead-Out Stands
Designed to guide strings of CWR onto storage racks or CWR trains. The vertical
movement is carried out via mobile base plate with lateral guiding, controlled by
two chains joined to a screw-type gear motor. The base plate is fitted with one
horizontal and two vertical steel rollers. Horizontal movement is carried out by a
carriage fitted with four rollers. Assembly is controlled by two chains joined to a
gear motor. The horizontal and vertical stroke are limited by end switches.
Model #
MAS-150
Name
Automatic Rail Weld
Grinding Machine
Designed to automatically grind the rail head
in the welded zone after stripping and
straightening operations in order to obtain
profile continuity of both rail welded together.
The movement of the grinding unit and the
rotation of the grinding beam are fully
automatic.
Back To Index
IN PLANT
Model #
MS-200
Name
Rail Base Grinder
Installed at the run-out conveyor of a flash-butt rail welding machine for removing
the remaining over-thickness due to a weld burr after stripping. It is possible to
produce a rail having a smooth underfoot face over its complete length. The
vertical grindstone moves longitudinally by means of a wheel-mounted carriage
alternatively actuated in rail direction by the operator during grinding
operation – the rail being stopped as the weld reaches the grinding machine.
When the rail is advancing on the conveyor, the grindstone is retracted.
Model #
PCM 31
Name
Rail Weld Straighteness
Measuring Beam
Designed for the verification of the
straightness of the rail in the welded
area. The check is performed after the weld
finishing operations. The longitudinal profile
of the rail head top and side are displayed
on a video screen that shows also the
channel of tolerances.
Model #
PE-200, PE-250,
PEE-250
Name
Hydraulic Press
for Testing Rail
Flash Butt Welds
Designed to be located near the
welding machine to perform deflection
tests on a 3-foot long welded rail
sample piece. It is available in 200or 300-ton models.
Back To Index
IN PLANT
Model #
PHRM 200/100
Name
Hydraulic 4-Way
Mobile Straightening
Press
Specially designed to straighten cooled
rail welds in railway workshops.
Model #
PHRML
250/120-15
Name
Hydraulic
Straightening Press
With Laser
Measuring
Device
Four-way hydraulic rail straightening
machine designed to straighten cooled
rail welds. Consistency is achieved
through the use of an electronic laser
Back To Index
IN PLANT
Model #
PR-38
Name
Multi-Spindle Rail Drill
Designed to drill from two to six bolt holes in rail ends. Each rail end can be drilled
in the best symmetric and square positioning and clamping conditions, and in the
shortest time.
Model #
PRV-250
Name
Rail Re-Profiling
Machine with
Two Millings Units
Designed to re-profile the running
surface and the gauge face of the
head of used rails in a reclaiming
plant.
Model #
RPS-1
Name
Rail Roller Conveyor
Designed for installation in rail plant conveyor lines where accurate and controlled
rail speed is required, including through ultrasonic testing units, rail cleaning
machines, and weld cooling units.
Back To Index
IN PLANT
Model #
RR-1
RRD-1
Name
Rail Conveyors
The RR-1 (rail conveyor roller) and RRD-1 (rail conveyor drive roller), are
designed for conveying the rails between each machine of the rail line, from the infeed to outlet of the line. The conveyors are also available with safety shutdown.
Model #
SBC-1
Name
Rail End Shot Cleaner
Designed for removing mill scale and rust from new and relay rail prior to
flash-butt welding. The cleaning of the rail ends allows for perfect contact between
the electric welding machine electrodes and the rails. The top and bottom of each
rail is cleaned over a length of 20 inches, as well as each vertical front section.
Abrasive material is fed to the wheels by gravity through two steel pipes fitted with
shut-off valves for flow control. The feeding pipes are connected to the bottom of
the recirculating system reservoir located above the machine casing.
Model #
SC-800
Name
Carbide Rail
Sawing Machine
Designed to be integrated in rail
treatment plants. Most often used
for removing fishbolted joints,
aluminothermic welds and defective
sections of rails to be reclaimed.
Back To Index
IN PLANT
Model #
SPR
Name
Rail Sawing/Drilling Machine
Heavy-duty, multi-spindle, rail sawing and
drilling machine designed for machining rails up
to 154 pounds in rail electric welding and
reclaiming plants, as well as in the steel mill
industry. The rail clamping system fastens rail
very near to saw blade and drill bit tools, keeping rail straight in machine for accurate cutting
and drilling with a single operator. Alternative
configurations and options are available.
Model #
SR-630
Name
Circular Rail Saw
Designed to cut all standard railroad rails and
incorporates a vertical, self-centering hydraulic
clamping system and retractable rollers placed at
inlet and outlet of the machine to allow easy rail
translation and accurate positioning. All operations
are fully automatic, including the hydraulic
advance of the sawing unit, allowing smooth, regular and powerful sawing operations.
Model #
Name
ZFR 11 GC Automatic Rail Flash-Butt
Welding Machine with
Stripping Machine
Automatic, hydraulically operated,
flash-butt welding machine with built in
stripping device and specially designed for
the welding of rails. Made for connection
to a 3 phase supply and loads the 3
phases equally.
Back To Index
INSTRUMENTS & GAUGES
Model #
RCA, RCAT-A1,
RCAT-WIDE
Name
Track Level
and Gauge
These Combination Track Level and Gauges can be
supplied as a two-piece Model (RCAT-A1), a onepiece Model (RCA), or for wide gauge (RCAT-WIDE).
All permit quick, accurate readings of track level and
gauge by means of two graduated dials.
Model #
CP Scope
Name
Telescopic View
Finder
Optical instrument of high
precision for determining track
level. The instrument permits
accurate raising of track surface,
is light and easy to handle, and
comes in a protective carrying
case to prevent accidental damage.
Model #
VPK-1300
Name
Telescopic View Finder
Optical instrument of high precision for
determining track level. The instrument
permits accurate raising of track surface,
is light and easy to handle, and comes in
a protective carrying case to prevent
accidental damage.
Back To Index
INSTRUMENTS & GAUGES
Model #
P-110
Name
Wheel/Rail Profile
Measuring Device
Reproduces the actual wheel or rail profile to scale,
thereby providing accurate profiles for comparing
wear and compatibility. It requires individual rail or
wheel clamps, depending upon the application.
Model #
SKM
Name
Rail Head Wear
Measuring Instrument
Wear measurement of rail head top by means
of sliding scales provided with locking screws.
Model #
RM-1200
Name
Rail Longitudinal
Running Surface
Recorder
For rail corrugation measurement
and rail joint and rail grinding
inspection.
Back To Index
INSTRUMENTS & GAUGES
Model #
ECG-7
Name
Track Geometry
Gauge
Self-propelled system designed
for monitoring and measuring
track conditions.
Model #
EUO
Name
Track Corrugation
Recorder
Measures the depth of
corrugation waves on the rail
surface and records the
measurements in relation to
position along the rail.
Model #
GXT
Name
Recording Trolley
Designed for measuring track gauge, cross
level, and twist over a preset base.
Lightweight and self-contained, it produces
analog traces on its integral 100-mm thermal
recorder that includes an automatic paper
take-up. The recording produced provides
an instant record of the track conditions and
confirms the current geometry of the track.
Back To Index
INSTRUMENTS & GAUGES
Model #
PTCT
For measuring wear and
waviness of rail.
Model #
Mephisto
Name
Track Gauge &
Overhead Line
Parameters Measuring &
Recording Instrument
Light, mobile track measuring device designed
for measuring profiles, fixed points, and
catenaries. Can also be used in switches
and rack rails.
Model #
UST
Measures through ultra-sound
flaws (failures) in the rail.
Back To Index
INSTRUMENTS & GAUGES
Model #
ASD-1
Name
Snow Detector
Designed to reduce operating
costs of all switch heaters. It is
constructed for the registration
of snowfall, drifting snow, sleet
and temperature. It is also
capable of detecting moisture
and temperature with a second
set point for dry-frost, which can
be found on heated platforms.
A rugged waterproof mounting
box constructed of non-corrosive
materials and solid-state circuits
ensure low maintenance.
Back To Index
INSTRUMENTS & GAUGES
Model # MCV202
Model # MCV203
Model # MCV208
Name
Rail Joint Gauge
Name
Flexible Attachment
Gauge
Name
Rail Deflection
Measuring Device
Model # MCV260
MCV261
MCV262
Model # MCV207
Model # MCV201
Name
Track Layer's
Rail Squares
Name
Track Layer's Level
Name
Tie Test Bars
Back To Index
INSTRUMENTS & GAUGES
Model #
FC
Model #
MCV225
Name
Topometer
This rail-measuring wheel is
designed specifically for
railroad use. Guide wheels
allow accurate measuring on
the top of rail for any length.
Measurements are made in
feet and inches or metric.
Name
Rail
Thermometer
Designed to serve as a quick
and accurate measuring tool.
Calibrated in Fahrenheit
and Centigrade, it is encased
in an aluminum housing
with two strong magnets
for fastening.
Model # MTV209
Name
Dansometer
Model # MCV206
Model # MTV264
Model # MCV210
Name
Fleximeter
Name
Sliding Caliper
Back To Index
Name
Metal Levelling Sticks
(Boning Rods)
INSTRUMENTS & GAUGES
Model #
SGMT-5
Name
Track Geometry Measuring Gauge
Back To Index
TRACK TOOLS — JACKS
Model #
CH-65
Name
Jack
Hydraulic jack for slewing
and lifting.
Model #
FM-63
Name
Jack
Rail lifting jacks with 2-ton
lifting capacity.
Model #
FM-85
FM-88
Name
Jack
Rail lifting jack with 5-ton
lifting capacity.
Back To Index
TRACK TOOLS — JACKS
Model #
GF-69
Name
Jack
Tamping jack has a lightweight
base and can be used with or
without the slewing shoe.
Model #
LG-59
Name
Rail Lifting Jack
Model #
LG-61
With rising rack bar.
Name
Rail Lifting Jack
Special jack for bridge platforms.
Back To Index
TRACK TOOLS — RAIL ADJUSTING MACHINES
Model #
ARR-531
Name
Rail Adjusting
Machine (Squisher) for precise regulation of gauge. Maintains rails in
position while tightening.
Back To Index
TRACK TOOLS — WRENCHES
Model #
OMV116
Name
Socket T Wrench
Model #
OMV128
Name
Fishbolt Ratchet
Wrench
Model #
OMV117
Back To Index
Name
Single End
Fishbolt Wrench
TRACK TOOLS — HAND AUGERS & REAMERS
Model #
OMV138
OMV139
Name
Cylindrical Hand Auger,
single flute or double flute
Model #
OMV140 OMV141
Name
Reamed Hand Auger, single flute
or double flute
Model #
OMV142
Name
Truncated Hand Reamer
Model #
OMV124
Name
Auger Brace
Model #
OMV178
Name
Auger Handle
Back To Index
TRACK TOOLS — RAIL SLEWING & SWIVELING BARS
Model #
OMV112
Name
Slewing Bars
Model #
OMV113
Name
Pinch Bars
Model #
OMV114
Name
Swivelling Bar
Model #
OMV115
Name
Rail Turning Bar
Model #
OMV119
Name
Rail Turner
Back To Index
TRACK TOOLS — RAIL & TIE TONGS
Model #
OMV120
Name
Rail Carrying Tongs
Model #
OMV121
Name
Tie Carrying Tongs
(for concrete ties)
Model #
OMV122
Name
Tie Carrying Tongs
(for wood ties)
Model #
OMV163
Name
Rail Lifting Levers
Back To Index
TRACK TOOLS — BALLAST FORKS & SHOVELS
Model #
OMV111
Model #
OMV118
Model #
OMV109
Name
Ballast Fork
Name
Ballast plow
Name
Ballast Shovel,
Swanneck
Model #
OMV110
Model #
OMV171 OMV172
Model #
OMV173
Name
Ballast Shovel, Rimmed
Name
Curved Ashwood
Handles
Name
Straight Ashwood
Handle
Back To Index
TRACK TOOLS — PICKS
Model #
OMV105
Name
Ballaster's Pickaxe, Pick and Chisel Ends
Model #
OMV106
Name
Tamping Pick, Beater and Laurel Leaf
Model #
OMV107
Name
Tamping Pick, Beater and Pick
Model #
OMV108
Name
Double Pickaxe
Model #
OMV177
Name
Ashwood Pickaxe Handle
Back To Index
TRACK TOOLS — ADZING HOWELS
Model #
OMV103
Name
Adzing Howels
Model #
OMV176
Back To Index
Name
Adzing Howel
Handle
TRACK TOOLS — HAMMERS
Model #
OMV101
Name
Sledge Hammer, double faced
Model #
OMV102
Name
Rail Chisel
Model #
OMV104
Name
Hammer for Driving Keys
Model #
OMV164
Name
Mallet
Model #
OMV174 OMV175
Name
Handles
Back To Index
TRACK TOOLS — SAWS
Model #
OMV165
Name
Tie Adzing Saw
Model #
OMV166
Name
Frame Saw for Ties
Model #
OMV167
Name
Timber Cross-Cut Saw
Model #
OMV126
OMV169
Name
Hand Saw Bow
Blades for Rail Hand Saw
Back To Index
TRACK TOOLS — MISCELLANEOUS
Model #
OMV127 OMVC127-G
Model #
MTV280
Model #
SO
Name
Ratchet Drill
Rail Clamp
Name
Hand Operated Rail
Bender/Jim Crow
Name
Hand Operated
Coachscrewing Machine
Name
Hand Operated Tie
Banding Machine
Model #
MTV265
Model #
MTV266
Name
Measuring Shovel
Name
Measured Packing
Shovel
Back To Index
TRACK TOOLS — MISCELLANEOUS
Model #
MTV268
Name
Monorail Wheelbarrow
Name
Emergency Fishplating
C-Clamps
Model #
MTV285
Name
Points Locking Bolt
Model #
MTV286
Model #
MTV132
Model #
MTV149-H MTV149-V
Name
Switch Launching Roller
Name
Rail Pulling Roller
Name
Rail Guide Rollers
Horizontal or Vertical
Back To Index
TRACK TOOLS — MISCELLANEOUS
Model #
MTV283
Name
Track Gauge
Maintaining Tie Bar
Model #
MTV287
Name
Ballast Screen
Name
Wagon Mover
Model #
EMB301
Name
Stop Blocks with
Fixed Shoe
Model #
EMB310
Model #
EMB320
Name
Butterfly Re-Railer
Name
Rail Shoe
Back To Index
TRACK TOOLS — MISCELLANEOUS
Name
Wheel Stops
Name
Rail-lifter Plating
FRONT SKID
Name
Ballast Blades
PLOW
GRADER BLADE
GRADER BLADE
SIDE WINGS
SKID
Back To Index
MISCELLANEOUS
Model #
Name
B Floodlight Portable Light Plant
Compact design makes it suitable for illuminating emergency night operations or tunnel
work. A hand pump allows the telescopic
floodlight to reach a maximum extension of
12 feet, 6 inches. The base consists of a
basket that can be filled with stone for added
stability at the work site then collapsed for
easy transport and storage.
Model #
MTM-7.2-KVA
Name
Generator
7.2 KVA, 7200 watt,
3 phase generator.
Name
High Frequency
An extensive line of high
frequency products.
Back To Index
MISCELLANEOUS
Model #
CR-FP
Name
Rail Loader
Non-infringing rail loader with a central base swiveling over 360˚.
Lockable in 4 positions to ease the loading and unloading of rails
from either side. Manual or motorized wench available.
Model #
CT
Name
Tie Loader
Vertical conveyor used for
loading wood ties into
high-sided wagons.
Back To Index
In the U.S.
Modern Track Machinery, Inc.
1415 Davis Road
Elgin, IL 60123
Phone: 847-697-7510
Fax: 847-697-0136
In Canada
Modern Track Machinery
Canada, Ltd.
5926 Shawson Drive
Mississauga, Ont. L4W3W5
Phone: 905-564-1211
Fax: 905-564-1217