Project Name:
Dimmers
Project Number:
Date:
Catalog Number:
Type:
Single Pole, 3-Way, 4-Way
120V/AC, 60Hz
Incandescent/Magnetic/Electronic Low Voltage
Smart Dimmer
System Masters
LIGHTING CONTROL SYSTEM
Prepared By:
Dimmers
FEATURES
• Softly curving arch; contrasting textures;
velvet-smooth, quiet actuation; and colors
that subtly complement each other make
Aspire RF devices an integral element of
any décor
• Virtually unbreakable, ultrasonically welded
top and backbody, extra-long, extra-wide
mounting straps and easy access ground
screws provide reliability and speeds up
installation
OPERATION FEATURES
• Electro-mechanical push pad for ON/OFF
operation with separate DIM/Bright bar
1.32"
(33.53mm)
• Programmable rapid and delayed fading
up to 4 minutes (default is 10 seconds)
• Single button programming
4.19"
(106.43mm)
• Adjustable ramp rate (up to 4 minutes)
• Can be associated with up to 5 other
devices
• All-On/All-Off inclusion
0.88"
(22.35mm)
• Patent Pending Panic Mode
RF9534-N
• Patented indicator system alerts if
dimmer is not set up in the network
• LED light-level display for presetting
illumination levels and master/accessory
units for multi-location control
• Pressing and holding push pad for 2
seconds brings light to full brightness
without affecting preset levels
• Amber LED at bottom of LED display
indicates On/Off load status
• Power failure memory
• Seven step blue LED display alongside
push pad indicates selected light level and
reduces brightness when off (night light
feature)
• Air-gap switch disconnects power
from load forcing an OFF condition
2.45"
(62.23mm)
• Configurable “Power on State”
• RFI filtering for radio, audio and video
equipment
3.81"
(96.77mm)
1.38"
(35.05mm)
C
Aspire RF™ Smart Dimmer System Master
Description
AW, DS, SG, WS
600W Electronic Low Voltage
AW, DS, SG, WS
1000W Incandescent/Magnetic Low Voltage
AW, DS, SG, WS
1000W Electronic Low Voltage
AW, DS, SG, WS
R
US
426
CWD Catalog
Number
Color
600W Incandescent/Magnetic Low Voltage
RF9534-N_ _
RF9535-N_ _
RF9536-N_ _
RF9537-N_ _
For ordering, include Cat. No. followed by the color code: AW (Alpine White), DS (Desert Sand), SG (Silver Granite), WS (White Satin)
TESTING & CODE COMPLIANCE
MATERIAL CHARACTERISTICS
• cULus Listed 6B28
• NOM Certified
• Complies with FCC Part 15, Class B
• Z-Wave Compliant Certified
• Meets Flammability Rating: V2 per UL94
• Temperature Rating: 32ºF to 104ºF (0ºC to 40ºC)
Related Products
RFHDCSG
RFTDCSG
RFWDC
Aspire RF™ Products
RF9534-N
3.28"
(83.31
mm)
4.20"
(106.68mm)
• Compatible with Aspire RF Accessory
Dimmer (RF9542-Z) for wireless 3-way
control, eliminating the need for traditional
3-way wiring or dedicated traveller wire
Aspire RF™ Controllers
3.28"
(83.31mm)
• Child Lockout feature
RF9501
RFTR9505-T
ASPIRE™ Products
9566TR
www.cooperwiringdevices.com
9544
9521
RF9536-N
Dimmers
Specification & Performance Data
LIGHTING CONTROL SYSTEM
Project Name:
Prepared By:
Project Number:
Date:
Catalog Number:
Type:
Single Pole, 3-Way, 4-Way
120V/AC, 60Hz
Incandescent/Magnetic/Electronic Low Voltage
Smart Dimmer
System Masters
Application
Aspire RF™ Dimmers replace regular switches to provide local and remote ON/OFF/DIM/BRIGHT control and are compatible with
Incandescent, Magnetic Low-Voltage and Electronic Low-Voltage lighting loads. Aspire RF Dimmers provide other programmable
functions (scenes, events, association, child lockout, etc.) when used with Aspire RF or other Z-Wave® compliant controllers*. Each
dimmer can be manually and remotely controlled by commands sent from an Aspire RF controller (RFTDCSG, RFHDCSG, RFBER)
or other Z-Wave compatible controllers or programs. Aspire RF Dimmers utilize existing 120 V/AC 60Hz standard house wiring and
fit into standard wallboxes. No new wiring needed. *(Note: some specific Aspire RF features may not be programmable)
Product Type
Catalog No.
Smart Dimmers
RF9534-N, RF9535-N, RF9536-N, RF9537-N
Performance
Rating: 120 V/AC, 60Hz
Derating is required in multi-gang installations
(See Multi-unit installation chart listed below)
Uses 300 Series Z-Wave Chip @ 40Kbs
Performance
Consideration
Installation &
Programming
An Aspire RF™ Z-Wave® enabled device must be
within 60 feet of another Z-Wave enabled device to
participate in a Z-Wave wireless mesh network. Any
one dimmer or switch can be associated with up to
5 devices (dimmers, switches, receptacles or plug-in
modules).
Please reference the Instruction Sheet included with
product for wiring installation. For programming of the
device, see the Aspire RF User Manual, which is
provided with either the Handheld (RFHDCSG) or
Tabletop (RFTDCSG) controllers and are also accessible
online at www.cooperwiringdevices.com/AspireRF.
Single Pole Location Wiring Diagram
Hot
Black
Red
Green
White
120V
Ground
Neutral
White
3-Way Location Wiring Diagram
MASTER
DIMMER
ACCESSORY
DIMMER
Hot
Black
Black
Red
120V
Traveler Wires
Black
cULus Listed 6B28
NOM Certified
Complies with FCC Part 15, Class B
Z-Wave Compliant Certified
Testing & Code
Compliance
Light
Fixture
Red
Green
Light
Fixture
White
Green
White
Ground
Ground
Neutral
White
Terminations
Dimmers have four 6” pre-stripped wire leads for line,
load, ground and neutral
Materials
Characteristics
Meets Flammability Rating: V2 per UL94
Temperature Rating: 32ºF to 104ºF (0ºC to 40ºC)
Warranty
5 year limited product warranty.
Product and performance warranties are extended
to 10 years if installed as part of an Aspire RF
Certified Installer System
White
White
4-Way Location Wiring Diagram
Red
ACCESSORY
DIMMER
MASTER
DIMMER
ACCESSORY
DIMMER
Red
Traveler
Wires
Hot
Traveler
Wires
120V
Green
White
Ground
Light
Fixture
Green
White
Ground
Ground
White
Multi-Unit Installation Chart
Catalog No.
Black
Green
Red
Black
Black
Black
Neutral
1-Gang
2-Gang
3 or more Gangs
RF9534-N
600W (MLV-450W)
600W (MLV-450W)
600W (MLV-450W)
RF9535-N
600W
600W
600W
RF9536-N
1000W (MLV-750W)
800W (MLV-600W)
800W (MLV-600W)
RF9537-N
1000W
800W
800W
White
www.cooperwiringdevices.com
White
White
White
2-ASPRFSMDIM-1108