Project Name:
Dimmers
Project Number:
Date:
Catalog Number:
Type:
Smart Dimmer
System Masters
LIGHTING CONTROL SYSTEM
Prepared By:
(No neutral required version)
Single Pole, 3-Way, 4-Way
120V/AC, 60Hz
Incandescent
Dimmers
FEATURES
• Softly curving arch; contrasting textures;
velvet-smooth, quiet actuation; and colors
that subtly complement each other make
Aspire RF devices an integral element of
any décor
• Virtually unbreakable, ultrasonically welded
top and backbody, extra-long, extra-wide
metal mounting straps and easy access
ground screws provide reliability and
speeds up installation
OPERATION FEATURES
• Electro-mechanical push pad for ON/OFF
operation with separate DIM/BRIGHT bar
• LED light-level display for presetting
illumination levels and master/accessory
units for multi-location control
1.80"
(45.7mm)
• Can be used for multi-location control
with either the RF9542-Z or the RF9542
(Non-RF Accessory Dimmer)
• Single button programming
4.20"
(106.7mm)
• Programmable rapid and delayed fading
up to 4 minutes (default is 10 seconds)
• Adjustable ramp rate (up to 4 minutes)
• Child Lockout feature
1.68"
(42.7mm)
• Can be associated with up to five other
devices
RF9534
• Neutral is not required for installation
of device
• Air-gap switch disconnects power from
load, forcing an OFF condition.
• RFI filtering for radio, audio and video
equipment
• Amber LED at bottom of LED display
indicates ON/OFF load status
• All-On/All-Off inclusion
• Seven step blue LED display alongside
push pad indicates selected light level –
and reduces brightness when OFF
(night light feature)
• Patent Pending Panic Mode inclusion
• Patented indicator system alerts if
dimmer is not set up in the network
• Energy Saver feature sets light output @
85% extending bulb life 3X and providing at
least 15% energy savings.
• Pressing and holding push pad for 2
seconds brings light to full brightness
without affecting preset levels
• Compatible with Aspire RF Accessory
Dimmer (RF9542) by using traditional
3-way travellers (up to 3 locations)
• Power failure memory
• Configurable “Power On State”
C
Aspire RF™ Smart Dimmer System Master
Description
600W Incandescent
AW, DS, SG, WS
1000W Incandescent
AW, DS, SG, WS
R
US
426
CWD Catalog
Number
Color
RF9534_ _
RF9536_ _
For ordering, include Cat. No. followed by the color code: AW (Alpine White), DS (Desert Sand), SG (Silver Granite), WS (White Satin)
TESTING & CODE COMPLIANCE
MATERIAL CHARACTERISTICS
• cULus Listed 6B28
• NOM Certified
• Complies with FCC Part 15, Class B
• Z-Wave Compliant Certified
• Meets Flammability Rating: V2 per UL94
• Temperature Rating: 32ºF to 104ºF (0ºC to 40ºC)
Related Products
Aspire RF™ Controllers
RFHDCSG
RFTDCSG
RFWDC
Aspire RF™ Products
RF9534-N
1.70"
(43.1mm)
RF9501
RFTR9505-T
ASPIRE™ Products
9566TR
www.cooperwiringdevices.com
9544
9521
Dimmers
Specification & Performance Data
Project Name:
Project Number:
Date:
Catalog Number:
Type:
Smart Dimmer
System Masters
LIGHTING CONTROL SYSTEM
Prepared By:
(No neutral required version)
Single Pole, 3-Way, 4-Way
120V/AC, 60Hz
Incandescent
Application
Aspire RF™ Dimmers replace regular switches or dimmers to provide local and remote ON/OFF/DIM/BRIGHT control and are
compatible with incandescent lighting loads. Moreover, Aspire RF Dimmers provide other programmable functions (scenes,
events, association, child lockout, etc.) when used with Aspire RF or other Z-Wave® compliant controllers*. Each dimmer
can be manually controlled and remotely controlled by commands sent from an Aspire RF controller (RFHDCSG, RFTDCSG,
RFBER) or other Z-Wave compatible controllers or programs. Aspire RF Dimmers utilize existing 120 V/AC 60Hz standard house
wiring and fit into standard wallboxes. No neutral is required. *Note: some specific Aspire RF features may not be programmable.
Single Pole Location Wiring Diagram
Product Type
Catalog No.
Smart Dimmers
RF9534, RF9536
Performance
Rating: 120 V/AC, 60Hz
Minimum Wattage: 60W
Derating is required in multi-gang installations
(See multi-unit installation listed below)
Uses 300 Series Z-Wave chip @ 40Kbs
Hot
Black
Red
Green
White
120V
Light
Fixture
Ground
Performance
Consideration
Installation &
Programming
Testing & Code
Compliance
An Aspire RF™ Z-Wave® enabled device
must be within 60 feet of another Z-Wave
enabled device toparticipate in a Z-Wave
wireless mesh network. Any one dimmer or
switch can be associated with up to 5 devices
(dimmers, switches, receptacles or plug-in
modules).
Please reference the Instruction Sheet
included with product for wiring installation.
For programming of the device, see the
Aspire RF User Manual, which is provided with
either the Handheld (RFHDCSG) or
Tabletop (RFTDCSG) controllers. Both
are also accessible online at
www.cooperwiringdevices.com/AspireRF.
cULus Listed 6B28
NOM Certified
Complies with FCC Part 15, Class B
Z-Wave Compliant Certified
Neutral
White
3-Way Location Wiring Diagram
ACCESSORY
ACCESSORY
Light Fixture
Accessory Dimmer location
(connects to Light Fixture)
Master Dimmer location
(connects to power)
4-Way Location Wiring Diagram
Red
Hot
120V
Black
Red
Blue
Blue
Tag
Blue
Blue
Blue
Green
Green
ACCESSORY
Terminations
Dimmers have four 6” pre-stripped wire leads
for line, load, traveller and ground
Neutral
White
White
Meets Flammability Rating: V2 per UL94
Temperature Rating: 32ºF to 104ºF
(0ºC to 40ºC)
Warranty
5 year limited product warranty
Product and performance warranties are
extended to 10 years if installed as part of
an Aspire RF Certified Installer System
White
Light Fixture
ACCESSORY
Ground
Ground
Master Dimmer (3-way location)
Connects to Power
Materials
Characteristics
Green
ACCESSORY
Ground
White
White
Accessory Dimmer (4-way location)
White
Accessory Dimmer (3-way location)
Connects to Light Fixture
Multi-Unit Installation Chart
Catalog No.
1-Gang
2-Gang
3 or more Gangs
RF9534
600W
600W
600W
RF9536
1000W
800W
800W
www.cooperwiringdevices.com
2-ASPRFSMDIM-1108