LFT SERIES
DESCRIPTION: The LFT Series is an Interior
T-Bar mounted fluorescent fixture used for below
deck marine lighting and low ceiling applications
where T-Bar mounting is required.
R E C E S S E D T - B A R F LU O R E S C E N T
SPECIFICATIONS
Housing: Corrosion-resistant, copper-free welded
aluminum. Also available, cold rolled steel option.
Finish: Thermoset, white polyester powder coated
finish.
Lens Frame: Drop-down frame has hinges for
easy access. Fits inside marine type T-Bar ceilings.
Diffuser: Acrylic prismatic diffuser for controlled
light.
Gasketing: Watertight EPDM gasket on access
plate.
Reflector: Aluminum with high reflectance white
powder coat finish.
Hardware: All hardware is captive; all exposed
hardware is non-magnetic stainless steel.
Ballast: 120 volt, 60 Hz high power factor ballast
standard. Contact factory for alternative voltages.
Wiring: Pre-wired phenolic terminal block located
on the access plate is standard for easy wiring.
23.75
23.75
(60.325cm)
Lamp Holder: Twist and lock lamp holders to
protect lamps during shock or vibration.
OPTIONS
24" FOR 2' MODELS
24" (60.96cm)
17, 32 watt models
48" FOR 4' MODELS
48" (121.92cm)
32, 40 watt models
3.5 (8.89cm)
• Emergency Ballast
• Low Temperature Ballast
• Radio Frequency Filter
COMPLIANCES
Weight: 2' Version = 14 lbs. (6.4 kg)
4' Version = 18 lbs (8.2 kg)
UL Listed:
Standard Units:
UL 1598A - Marine Inside Drip-proof Type
UL924 - Emergency Ballast
Meets US Coast Guard Requirements
cUL Listed for use in Canada
ABS
N-5610282D
8711 West Port Avenue • Milwaukee, WI 53224 USA • Phone: 414. 973. 3300 • Fax: 414. 973. 3210
www.phoenixproducts.com
Durability by Design
PHOTOMETRICS
Contact Phoenix Products Company for Photometric information.
Or visit our Website at www.phoenixproducts.com
ORDERING INFORMATION
*** PLEASE NOTE NOT ALL COMBINATIONS LISTED BELOW
ARE AVAILABLE. CONTACT FACTORY WITH ANY QUESTIONS
OPTIONS
SERIES
LAMPS
WATT/TYPE
-
VOLTAGE
-
ELECTRICAL
(120V Standard)
example:
LFT
2
20
LFT
1
2
3
4
17*
20
32*
40*
WATT/TYPE
17* = F17 T-8 (Medium Bi-Pin, 2')
20 = F20 T-12 (Medium Bi-Pin, 2')
32* = F32 T-8 (Medium Bi-Pin, 4')
40* = F40T12 (Medium Bi-Pin, 4')
120
277
220/50H
220/60H
EMB
EMB
LTB
RFF
NT
VOLTAGE OPTIONS
ELECTRICAL OPTIONS
120V
277V
220/50H = 220 Volt; 50Hz
220/60H = 220 Volt; 60Hz
EMB = Emergency Ballast
LTB = Low Temperature Ballast
RFF = Radio Frequency Filter
NT = No Terminal
Lamps not Included
*Electronic Ballast is Standard
N-5610282D
8711 West Port Avenue • Milwaukee, WI 53224 USA • Phone: 414. 973. 3300 • Fax: 414. 973. 3210
www.phoenixproducts.com
Durability by Design