Slot 2 LED OTM
Recessed Linear
Type:
TM
Slot 2 LED can meet your demanding project schedule with
Project:
the "On the Mark" quick ship program offering.
Slot 2 LED takes both form and function a step further
TM
with increased efficacy and integral controls creating a
Catalog Number:
digitally addressable luminaire that is perfect where visually
DO NOT TYPE HERE. Autopopulated field.
harmonious illumination and energy efficiency are desired.
Technical Drawing
Specification Features (continued on page 2)
Housing
Nominal 2" x 4’, 5’ or 8’ and continuous rows
in 4 foot increments as standard, upper housing
fabricated from cold-rolled steel with extruded
aluminum ceiling trim.
Mounting
Recessed. Available for sheetrock, 9/16" slot grid or
15/16" inverted tee ceilings, or 9/16" inverted tee.
Finish
Painted high reflectance matte white powder coat.
Quantity Limits:
Individual Units: 100 units each length (4ft,5ft & 8ft)
Shipping:
5 business days from clean release.
Reflector
Precision-formed steel; high reflectance matte white
powder coat; 93% reflectivity.
Continuous Runs: 250 l/ft maximum per total order
Shielding
Flush Lens: Snap-in 90% transmissive satin acrylic
lens.
Regressed Lens: Lay-in 90% transmissive satin acrylic
lens.
Fixture Performance - SL2L
Lumens Output
600 LMF**
800LMF**
Fixture Style
RLP
FLP
RLP
FLP
Delivered Lumens/FT
404
533
534
705
Input Watts/FT
6
6
8
8
Lumen/Watt
69
91
67
88
Flush - (FLP)
AL
TOT
ION
AT
INTE
GR
Ordering
Example: SL2L QS LOP 4FT RLP FL 80CRI 35K 600LMF MIN1 ZT 277
Series
SL2L
Program
Slot 2 LED
Linear
Recessed
Direct Light Source
Color Rendering
80CRI
80 CRI
SYSTE M
* CCT (35K)
* Consult factory for customized lumen output and wattage
**Based on calculated values
360˚
QS
5-Day
Shipping1
Direct LED
Color Temp
35K
3500K
Linear Length Plan
LOP
Linear Optimized
Plan
Total Run Length
Fixture Style
Ceiling Trim
4FT
4'
8FT
8'
RLP2
Regressed Lens
FL4
5/8” Flange (sheetrock)
5FT
5’
__FT
*Specify continuous linear feet in 4 foot
increments, maximum 40FT run length.
FLP3
Flush Lens
TG
9/16” or 15/16" Flat or Inverted Tee
GB4
Trimless (sheetrock)
Direct LED Light Output
Minimum Dimming Level
Control Input
Voltage
600LMF
600 Lumens per FT
NODIM
Non - Dim
(blank)
Non - Dim
120
120V
800LMF
800 Lumens per FT
MIN1
Constant current,
dimming to 1%
ZT
0-10V
277
277V
NLIGHT
nLight enabled
Options
Emergency Options
E10W
4ft emergency section
with battery pack5
CP
Chicago
Plenum
Notes
1.
2.
3.
4.
5.
marklighting.com^
Page 1
888-834-5684
From clean release
Supplied with lift and shift lay-in lens.
Supplied with snap-in lens.
Not intended for post sheetrock installation.
Remote mounted
©2013-2016 Acuity Brands Lighting, Inc. All Rights Reserved. We reserve the right to change design,
materials and finish in any way that will not alter installed appearance or reduce function and performance.
SLOT 2 LED LOW PROFILE OTM 08/11/16
MARK
ARCHITECTURAL
LIGHTING
TM
Slot 2 LED OTM
Recessed Linear
Specification Features (continued)
LED Components
Linear: Nichia® - 757 Series LED chips (available in 80 CRI)
Certification
CSA Certified to meet U.S. and Canadian standards, rated for Chicago
Plenum, damp location and wet location listings.
LED Life
Rated 65,000 hours (L80) at 25 °C ambient temperature.
Warranty
5-year limited warranty. Complete warranty terms located at
www.acuitybrands.com CustomerResources/Terms_and_conditions.aspx
Color Consistency
The Acuity Brands circuit boards for the linear LED components use a precise
binning algorithm which creates a consistent color temperature from board
to board. Color variation is no greater than a 2.5 Step MacAdam (2.5SDCM)
along the black body locus from board to board.
Driver
eldoLED constant current driver delivers ultra-smooth dimming resolution
from 100% to 1%, while assuring flicker free, low current inrush, 89%
efficiency and low EMI.
Integrated Controls
Optional nLight® embedded controls make luminaire addressable- allowing it
to digitally communicate with other nLight enabled controls such as dimmers,
switches, occupancy sensors and photocontrols. Simply connect all the nLight
enabled control devices using standard CAT5 Cabling. (Input option: NLIGHT)
Ceiling Trim
ION
AT
AL
TOT
360˚
SYSTE M
INTE
GR
Mark 360° Total System Integration
Complete lighting systems with components and
technologies all manufactured, warrantied and supported
by Acuity Brands®.
Notes
• Actual performance may differ as a result of end-user environment
and application.
• All values are design or typical values, measured under laboratory
conditions at 25 °C.
• Specifications subject to change without notice.
• For full product offering refer to
standard product specification sheet(s)
• For photometric information refer to www.marklighting.com
Technical Drawing
Flush - (FLP)
FL
GB
(Flanged sheetrock)
(Flangeless sheetrock)
TG
TG
(15/16” Grid)
(9/16” Grid)
TG
(9/16” Slot Grid)
Regressed - (RLP)
marklighting.com^
Page 2
888-834-5684
©2013-2016 Acuity Brands Lighting, Inc. All Rights Reserved. We reserve the right to change design,
materials and finish in any way that will not alter installed appearance or reduce function and performance.
SLOT 2 LED LOW PROFILE OTM 08/11/16