Catalog Number
Notes
Type
FEATURES & SPECIFICATIONS
INTENDED USE - Architectural low-profile luminaire provides general illumination for
rough service (vandal resistant) applications. Ideal for interior or exterior applications
where safety and security are a concern. Certain airborne contaminants can diminish
integrity of acrylic. Click here for Acrylic Environmental Compatibility table for
suitable uses.
ATTRIBUTES - Designed to complement building architecture and to endure extreme
environmental conditions and physical abuse.
CONSTRUCTION - Bezel - One-piece, marine grade die-cast aluminum, low copper alloy
(<1% copper), .125 inch thick. Encloses lens and secures to backplate with stainless steel
Torx® T-10 set screws (two included) or optional stainless steel tamper-resistant screws
(see Options).
Backplate - Corrosion-resistant, 16-gauge steel. Post-painted in black polyester powder
coat, and has a keyhole mounting detail.
Gasket - Polycarbonate: Perimeter lens gasket is one-piece silicone "O" ring, mechanically held in lens channel. Glass: Perimeter lens gasket is closed-cell silicone. Pad
mounting gasket is closed-cell neoprene that seals backplate to mounting surface.
Gaskets help cushion impact shock.
FINISH - Standard finish is textured polyester powder coat in white, black or bronze.
Optional architectural colors available (see Options).
OPTICAL SYSTEM - Lens-polycarbonate – Translucent white, injection molded, UV
stabilized lens is .125 inch thick. Smooth exterior allows for easy cleaning, and interior
pattern diffuses light for even surface illumination.
Lens-glass –Tempered borosilicate lens, .250 inch thick, has smooth exterior for easy
cleaning and textured interior.
Reflector – Internal reflector is high-reflectance white powder coat perimeter for
maximum light output. Lamp positioning assures uniform brightness and illumination.
ELECTRICAL SYSTEM - Ballast - Class P, Electronic, High Power Factor multi-volt with
starting temperature of -5°F (-20°C). Exception is 13TT, Electromagnetic ballast, Normal
Power Factor, 120V only.
Socket - High-temperature thermoplastic with lamp retention clip.
Lamp - 35K lamp included unless specified L/LP.
INSTALLATION - Unit may be wall mounted. For maximum vandal resistance, use four
hole mounting pattern. For installation on irregular or uneven surfaces, caulk/ sealant
may be required for a more positive seal.
LISTING - UL listed to US and Canadian safety standards (see options). NOM Certified
(see Options). UL listed for 25oC ambient and wet locations. IP65 rated.
Rough Service Fixture
VGO2
Compact Fluorescent
Oval Horizontal Eyelid
Wall Mounted
ADA
COMPLIANT
9.4" (23.8)
4" (10.2)
13.4" (34)
All dimensions are inches (centimeters).
NOTE: Specifications subjct to change without notice
ORDERING INFORMATION
Example: VGO2 26TRT 120 DBNH GMF LPI
Choose the boldface catalog nomenclature that best suits your needs and
write it on the appropriate line. Order accessories as separate catalog number.
VGO2
Series
VGO2
Wattage
13TT
13DTT
18DTT
26DTT
26TRT
32TRT
One
One
One
One
One
One
13W
13W
18W
26W
26W
32W
Voltage
1
twin-tube lamp
double twin-tube lamp2
double twin-tube lamp
double twin-tube lamp
triple-tube lamp
triple-tube lamp
120
277
347
MVOLT 3
Lens
(blank) Polycarbonate
GL Borosilicate glass
Accessories
Order as separate catalog numbers.
RK1 T10DRV Torx TX10 screwdriver, for use with Gateway
set screws.
RK1 T20BIT Hex-base driver bit, Torx TX20, for tamperresistant screws with center reject pin.
RK1 T20DRV Torx TX20 screwdriver for use with tamperresistant screws with center reject pin.
Outdoor and Special Environments
Options
Paint Finishes4
Standard Textured Colors:
DWHG
White
DBLB Black
DDBT Dark Bronze
DNAT Natural Aluminum
DSST Sandstone
Optional Textured Colors:
DBNH
Bronze
DSPD
DSPE
DSPF
DSPG
DSPH
DSPJ
Dark Gray
Green
Rust
Dark Red
Light Red
Light Gray
Shipped installed in fixture LPI
GLR Internal fast-blow
fusing 5
L/LP
GMF Internal slow-blow
fusing 5
TRS Tamper-resistant
screws 6
CSA Listed and labeled to
comply with Canadian
safety standards
NOM NOM Certified
Lamp7
Lamp
included
(standard)
Less lamp
NOTES:
1 120V only.
2 Not available in 347V.
3 Multi-volt electronic ballast (for DTT and TRT lamps)
capable of operating on any line voltage between 120 and
277 volt.
4 For additional colors, refer to Architectural Paint brochure.
5 Must specify voltage. Not available with MVOLT.
6 T-20 screws with center reject pin.
7 Lamp included unless L/LP is specified.
Sheet #: VGO2F_O
BM-2035
VGO2 Rough Service Wall-Mounted Fixture, Fluorescent
VGO2 32TRT 120 (WALL), SYLVANIA CF32DT/E/IN/835 lamp, 1.8 s/mh, 2400 rated lumens, test no. 99020110
Distribution data
Angle
180° 165° 150° 135°
120°
105°
95°
90°
85°
75°
100
200
300
60°
0° 15° 30°
45°
Spacing criterion: 1.8
Spacing to mounting height: 1.8
0°
5°
15°
25°
35°
45°
55°
65°
75°
85°
90°
95°
105°
115°
125°
135°
145°
155°
165°
175°
180°
cp.
49
49
55
69
82
94
103
107
108
104
101
96
84
70
55
39
24
11
2
0
0
Output data
Lumens
Zone
0
5
16
32
51
73
92
106
114
113
0
104
89
69
49
31
15
5
1
0
0
0°- 30°
0°- 40°
0°- 60°
0°- 90°
90°- 180°
0°- 180°
Lumens
%lamp
52 2.2
103
4.3
268 11.2
602 25.1
363 15.1
965 *40.2
A
B
C
* Fixture efficiency
D
VGO2 32TRT WALL MOUNT (in feet)
HORIZONTAL PLANE ISOCANDLE LINE
(8 FT. SHOWN)
A
B
C
D
7
2.4
1.9
0.5
0.1
8
1.9
1.4
0.3
0.1
9
1.5
1.1
0.3
0.1
10
1.2
0.9
0.2
0.1
Tested to current IES and NEMA standards under stabilized laboratory conditions.
Various operating factors can cause differences between laboratory data and actual
field measurements. Dimensions and specifications on this sheet are based on the most
current available data and are subject to change without notice.
Lithonia Lighting
Sheet #: VGO2F_O
©2000-2010 Acuity Brands Lighting, Inc., All rights reserved. Rev. 2/16/10
Rough Service
One Lithonia Way, Conyers, GA 30012
Phone: 770-922-9000 Fax: 770-981-8141
www.lithonia.com