Trucknology® RoadShow 2016
Description of exhibits: Construction vehicles
Vehicle overview
Type
TRS No.
Cab
Body type
Body manufacturer
TGM 18.340 4x4 BB
687
C
3-way tipper (lightweight construction)
Schwarzmüller
TGS 18.400 4x2 BL
707
M
Set-down skip loader
Palfinger
TGS 18.440 4x4H BLS
693
L
Semi-trailer tipper (insulated)
Kempf
TGS 26.440 6x2-4 BL
705
M
Roll-off skip loader
HYVA
TGS 26.440 6x4H-4 BL
706
L
Roll-off skip loader
Meiller
TGS 26.480 6x4 BL
688
L
3-way-tipper (insulated)
Ressenig
TGS 26.480 6x6H BL
692
M
3-way-tipper with trailer
KH-Kipper
TGS 32.400 8x4 BB
703
M
Concrete mixer
Stetter
TGS 35.440 8x4 BB
702
M
Concrete mixer
Liebherr
TGS 35.480 8x4 BB
690
M
3-way tipper
Dautel
TGS 35.480 8x4-4 BL
704
M
Roll-off skip loader
Cargotec
TGS 35.480 8x6H BL
694
M
Rear tipper (Halfpipe)
Carnehl
TGS 41.480 8x8 BB
625
M
Rear tipper
KH-Kipper
TGX 18.480 4x4H BLS
691
XL
Semi-trailer tipper
Schmitz
TGX 33.560 6x4 BL
685
XL
3-way-tipper with centre-axle trailer
Meiller
TGX 33.560 6x4 BLS
686
XL
Semitrailer tipper
Meiller
Trucknology® RoadShow 2016
Description of exhibits: Construction vehicles
TRS 687
TGM 18.340 4x4 BB
The traction all-rounder.
3-way tipper (lightweight construction)
MAN chassis specifications
Vehicle number
Order number
Payload at 18 t GVW [kg]
Schwarzmüller 3-way tipper body
N38-9140
8000-00715
9,930
Motorisation
D0836LFL68/ Euro 6
kW/ hp/ Nm
251/ 341/ 1,250
Wheelbase/ overhang [mm]
Cab (WxL)
3,600/ 1,175
C (2,240 x 1,620 mm)
Drive train
n Gearbox ZF 12 AS 1210 OD MAN TipMatic ® Offroad
n Transfer case G 103, Transfer box management (VSM)
n Front axle VP-09 driven, parabolic springs 7.5 t
n Rear axle AP HP-1333, i = 4.83, parabolic springs 11.5 t
n Power take-off NH/1C without flange f=1.22
Fittings/ special features
High height design
n MAN EasyStart bei TipMatic ®
n High-comfort driver‘s seat with air suspension, lumbar
support, shoulder adjustment and heating
n Co-drivers‘ bench for 2 persons (single seats)
n Emergency stopping signal (ESS)
n Air auxiliary heater Eberspächer D4S
n construction-site step on front mudguard, driver‘s side
n entry lighting for driver and co-driver
n off-road logic for ABS
n Radio MAN Media Truck 12 V with 5“ display,
reception digital (DAB+)
n
n
Technical data
Inner dimensions (LxW):
n Overall width max.:
n Useable volume approx.: n
n
Tipper body of welded steel construction
n
Floor made of 4 mm fine grain steel (Hardox 450)
n
n
4,500 x 2,420 mm
2,550 mm
7.5 m³
Fixed 3 mm front wall in cab height
4 pairs of retractable lashing, 5 t (width between lashing
rings approx. 2,320 mm)
n
1-part reinforced aluminum hollow profile side walls,
60/4/3 mm, approx. 680 mm high, alternatively bottom or
top hinged with extended swivel bolt locks and spring
n
lifting aid
Sidewalls left and right with manual central locking, both
side walls with plastic rubbing strips and rubber bumpers
on the rear panel
n
Aluminum hollow profile rear wall, 60/4/3 mm, approx.
n
Hooks on tail gate for dosage chains
n
16 t hydraulic cylinder for 3-way tipping, with safety cable,
780 mm high, top hinged with extended swivel bolt locks
n
Pneumatic tail gate operation
pneumatic tipper valve with overpressure protection and
actuation in cab
n
n
40 l pump with direct flange mounting
35 l hydraulic oil reservoir
Trucknology® RoadShow 2016
Description of exhibits: Construction vehicles
TRS 707
TGS 18.400 4x2 BL
The manoeuvrable skip-loader.
Set-down skip loader
MAN chassis specifications
Vehicle number
Order number
Payload at 18 t GVW [kg]
Motorisation
kW/ hp/ Nm (Top Torque)
Wheelbase/ overhang [mm]
Cab (WxL)
Palfinger Set-down skip loader body PST14 TEC
06S-H882
8000/ 00686
7,390
D2676LF47/ Euro 6
294/ 400/ 1,900 (2,100)
3,600/ 1,250
M (2,240 x 1,880 mm)
Drive train
n Gearbox ZF 12 AS 2130 DD MAN TipMatic ® Profi
n MAN PriTarder ®
n Front axle VOK-09 dropped, parabolic springs 8 t
n Rear axle Hypoid HY-1350, i = 2.71, air suspension 13 t
n Top Torque (higher torque in gear 11+12)
n PTO NH/4C without flange f=1.05
Fittings/ special features
n Fuel tank 300 l right hand side and 60 l AdBlue ®
n Bus-stop brake
n MAN EasyStart for TipMatic ®
n Idle Shut Down
n EBA2, ABS, ASR, ESP
n Adaptive Cruise Control (ACC)
n Lane-Guard-System IV (LGS IV)
n Digital axle load display (ALM) in cab
n Construction-site step on front mudguard, driver‘s side
n Lowering air springs to about 20 mm above stop
n Automatic setting of normal level from 20km/h
n Radio MAN Media Truck Advanced with navigation,
hands-free function ‚Comfort‘ for 2 mobile phones,
reception digital (DAB+), MAN Sound System
Technical data
n Platform length: 3,800 mm
n Unit length: 4,200 mm
(incl. storage tray)
400 mm
n Lifting capacity:
14,000 kg
for handling containers acc. to DIN 30720 Part 1 and 2
n
n
n
n
n
n
n
n
n
n
n
n
Basic frame of solid steel construction with closed base,
screwed floor panels, continuous side panels and certified
underrun protection
Optical warning device in cab detects the position of the
lifting arms in transport position
Electr. PAD control incl. emergency-stop
Hydraulic 4-point container clamping
(setting range 1,060 mm to 1,750 mm)
Outriggers integrated into the basic frame incl. highquality plain bearings and position monitoring
Palfinger radio remote control with OLED display
Fast gear lifting for set-down empty containers
Chain suspensions with safety hooks
Triple tipping hooks with pneumatic hook safety
(distance between hooks 600 mm)
4 lashing points on platform
2 working lights
Trucknology® RoadShow 2016
Description of exhibits: Construction vehicles
TRS 693
TGS 18.440 4x4H BLS
MAN HydroDrive© - The Original.
Semi-trailer tipper (insulated)
MAN chassis specifications
KEMPF Halfpipe rear tipper (insulated) - SKM 35/3 SRi
Vehicle number
22S-3881
Order number
8000/ 00690
Payload at 40 t GCW [kg]
25,470
Motorisation
D2676LF46/ Euro 6
kW/ hp/ Nm
324/ 440/ 2,100 (2,300)
Wheelbase/ overhang [mm]
Cab (WxL)
3,600/ 750
L (2,240 x 2,280 mm)
Drive train
n Gearbox ZF 16 S 252 OD
n MAN PriTarder ®
n FA VH-09 straight, hydrostatically driven
(MAN HydroDrive ®), parabolic springs 8 t
n RA AP HP-1352, i = 3,63, air suspension 13 t
n PTO NH/1C without flange f=0.91/1.09 rhs, horizontal
Fittings/ special features
High comfort driver‘s- and co-driver‘s-seat
n Air deflector to stop dust swirling
n Offroad package Basic
n Air auxiliary heater Eberspächer D4S
n Emergency brake assistant 2 (EBA2)
n Anti-spin regulator (ASR)
n Electronic stability program (ESP)
n Lane-Guard-System IV (LGS IV)
n Off-road logic for ABS
n Finisher brake
n Stoneguard grille in front of radiator
n Working platform with step and grab handle
n Protective grille for headlights
n MAN CameraView - preparation for camera
n
Technical data
n Loading length approx.:
n Loading width approx.:
n Body height approx.:
n Body capacity approx.:
n Body weight approx.:
n
Frame: Steel construction using high quality f ine grain steel,
n
7,200 mm
2,350 mm
1,600 mm
24.6 m³
6,300 kg
chassis frame conically tapered towards the front
(new OFF-Road construction design), without holes in the
gusset plate of the longitudinal beams, all components in
hot-dip galvanized design
n
Tipping-cylinder: High pressure, 4 point bearing,
n
Dump body: Floor 4 mm HARDOX-HB 450, side-walls,
Georg/Hyva, tilting angle 52°
front-wall and rear-wall 3.2 mm HARDOX-HB 450
n Insulation: Body with foam sandwich panels,
R–value about 1.65 (m²K)/W
n Sensors: 4 pieces (without reading device)
n
n
PVC rolling tarpaulin system
Supplementary equipment: tool box (PVC), construction
sign at the rear, foldable A-plate
Trucknology® RoadShow 2016
Description of exhibits: Construction vehicles
TRS 705
TGS 26.440 6x2-4 BL
The robust and versatile
standard hook-loader.
Roll-off skip loader
MAN chassis specifications
Vehicle number
Order number
Payload at 26 t GVW [kg]
Motorisation
kW/ hp/ Nm (Top Torque)
Wheelbase/ overhang [mm]
Cab (WxL)
HYVA Lift roll-off skip loader body Titan 20-60 SK
18S-E315
8000/ 00680
14,860
D2676LF46/ Euro 6
324/ 440/ 2,100 (2,300)
4.500 + 1.350/ 2,400
M (2,240 x 1,880 mm)
Drive train
n Gearbox ZF 12 AS 2130 DD MAN TipMatic ® Profi
n MAN PriTarder ®
n FA VOK-09 dropped, parabolic springs 8 t
n RA Hypoid HY-1350, i = 2.71, air suspension
n Trailing axle NOL-08 steered, lifting
n Top Torque (higher torque in gear 11+12)
n Power take-off on flywheel side withpump connection
Fittings/ special features
n Fuel tank 400 l right hand side and 60 l AdBlue ®
n MAN EasyStart bei TipMatic ®
n High-comfort driver´s seat with climate control
n Idle Shut Down
n 2-cylinder air compressor 720 cc
n ABS, ASR, ESP and Lane-Guard-System (LGS IV)
n Digital axle load display (ALM) in cab
n Construction-site step on front mudguard, driver‘s side
n Lowering air springs to about 20 mm above stop
n Automatic setting of normal level from 20km/h
n Radio MAN Media Truck Advanced with navigation,
hands-free function ‚Comfort‘ for 2 mobile phones
n High load rolling stabilisation (high-load damper + X-control)
Technical data
n Lifting and tipping capacity:
n Inner container length:
n Standard pump: n Hook Height:
n
Universal sub frame made out of high-tensile DOMEX steel.
n
n
200 kN
3,600 - 7,050 mm
84 l/ min
1,570 mm
Sub frame with integrated cylinder bearing, locking mecha-
nism for the tipping frame, shaft bearing of tipping frame
and container supports consisting with 4 rollers and
4 cushions.
including automatic mechanical security lockings.
n
n
n
Tipping frame with separated tipping and scrolling bearings
Knuckle arm made of high-tensile DOMEX steel with
maintenance-free guidance.
Hydraulic system with double acting cylinders. Control
block with pressure relief valve is pneumatically operated
out of the drivers cabin. Oil tank with filtering device.
n
Hydraul. Combi-Container locking (internal or external)
n
Operation panel in cabin (pneumatic)
n
Pneumatical locking of hook, 1,570 mm
n HD-Tank
n
Fast gear complete, capacity < 100 kN
n
Electrical security device for short containers/ locking of
n
n
n
Pneumatic hook security device
tipping frame
Underrun protection, adjustable mechanically
Toolbox made of stainless steel
Trucknology® RoadShow 2016
Description of exhibits: Construction vehicles
TRS 706
TGS 26.440 6x4H-2 BL
The construction site skip loader.
High payload, high traction.
Roll-off skip loader
MAN chassis specifications
Vehicle number
Order number
Payload at 26 t GVW [kg]
Motorisation
kW/ hp/ Nm (Top Torque)
Wheelbase/ overhang [mm]
Cab (WxL)
MEILLER Roll-off tipper RS 21.65
35S-1565
8000/ 00681
14,200
D2676LF46/ Euro 6
324/ 440/ 2,100 (2,300)
4,500 + 1,350/ 2,400
L (2,240 x 2,280 mm)
Drive train
n Gearbox ZF 16 S 252 OD MAN ComfortShift
n MAN PriTarder ®
n Front axle VHK-09 dropped, hydrostatically driven
(MAN HydroDrive ®), parabolic springs 9.5 t
n Rear axle Hypoid HY-1350, i = 3,36, air suspension
n Trailing axle NOL-08 steered, lifting
n Power take-off on flywheel side with pump connection
Fittings/ special features
n Fuel tank 400 l right hand side and 80 l AdBlue ®
n High-comfort driver´s seat with climate control
n Idle Shut Down
n EBA2, ABS, ACC, ASR and ESP
n Lane-Guard-System IV (LGS IV)
n Digital axle load display (ALM) in cab
n Construction-site step on front mudguard, driver‘s side
n Lowering air springs to about 20 mm above stop
n Automatic setting of normal level from 20km/h
n High load rolling stabilisation (high-load damper + X-control)
n Radio MAN Media Truck Advanced with navigation,
hands-free function ‚Comfort‘ for 2 mobile phones,
reception digital (DAB+); MAN Sound System
Technical data
n Technically possible payload
incl. container max.:
n Suitable for container length
in accord. with DIN 30722 part 1: n
21,000 kg
5,000 to 6,500 mm
n
Completely redesigned roll-off tipper with new innovative
frame technology
n Superstructure with optimized efficiency, weight and
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
building height
Efficiency package with decisive improvement in pace by
patented control system
Load-dependent quick movement
Automatic driving speed regulation
MEILLER high-pressure hydraulic system with
continuously running pump at the p.t.o., which is located
on the flywheel side
Hydraulic interior locking
Complete cover at the rear
Support for short containers
Remote control with engine start-stop
Automatic speed lowering speed at end position
Rear view camera
Hydraulic underride guard
Small toolbox made of stainless steel
Netbox made of stainless steel between axles
2 LED-working headlights
2 folding A-plates
Outline marking
2 ECE plates
Trucknology® RoadShow 2016
Description of exhibits: Construction vehicles
TRS 688
TGS 26.480 6x4 BL
The flexible specialist for road work.
3-way-tipper (insulated)
MAN chassis specifications
Vehicle number
Order number
Payload at 26 t GVW [kg]
Motorisation
kW/ hp/ Nm
Wheelbase/ overhang [mm]
Cab (WxL)
RESSENIG Thermo-3-way-tipper (KI3S3L)
30S-5230
8000/ 00679
13,500
D2676LF45/ Euro 6
353/ 480/ 2,300
3,300 + 1,400/ 800
L (2.240 x 2.280 mm)
Drive train
n Gearbox ZF 12 AS 2330 OD MAN TipMatic ®
n MAN PriTarder ®
n FA VO-09 gerade, Parabelfedern 9,5 t
n RA AP HPD-1382/HP-1352, i = 4,00, Luftfederung 2x 13 t
n Power take-off on flywheel side withpump connection,
spline hub profile DIN ISO 14 - 8x32x36 f=1.233
Fittings/ special features
n MAN EasyStart bei TipMatic ®
n High-comfort driver‘s seat with air suspension, lumbar
support, shoulder adjustment and heating
n Air auxiliary heater Eberspächer D4S
n Trailer coupling Ringfeder 5050A for central axle trailer
n Emergency Brake Assistant 2 (EBA2)
n Anti-spin regulator (ASR)
n ECAS air suspension
n Electronic stability program (ESP)
n Adaptive Cruise Control (ACC)
n Lane-Guard-System IV (LGS IV)
n Off-road logic for ABS
n Finisher brake, Rear view camera Orlaco
n Parking brake with pneumatic applic. of front wheel brakes
n
Technical data
Inner Dimensions (LxWxH) 4,800 x 2,420 x 800 mm
n Width for euro-pallets
n Load capacity approx.: 10.6 m³
n Loading height (unloaded):
1,506 mm
n Weight of superstructure incl. extras:
3,460 kg
n
n
Subframe made of fine grained steel for structural use with
for better stability during unloading procedure; tipping pins
n
Tipping bridge made of 5 mm HARDOX (wear resistant
mounted on tipping frame outboard
reinforcement in the tipping cylinder and torque tube areas
with cross over protection; low frame structure (431 mm)
steel), towing eyes embedded in tipping floor and
n
Front wall: Aluminium 40 mm, height 800 mm incl. stone
deflector, 2 towing eyes embedded
n
Side panels: Aluminium 60 mm, height 800 mm
LHS: hydraulic foldable RHS:mech. fold- and swingable
with central lock and lifting support
n
Tailboard 3 mm HARDOX, height 800 mm, swingable
n
Hydraulics: multi stage high-pressure-cylinder, stages
n
n
n
Dosing unit for asphalt (operation with remote control)
hard chrom-plated, gimbal mounted
Double hydraulic supply line at the chassis tail for trailer use
Add. equipment: foldaway-underride-guard, Aluminium tool
box; Aluminium draw with lid, brackets for brush and shovel
n
n
Tipper with thermal insulated body incl. certificate
Mixture Temperature Mangement(MTM) incl. Controller
with display and printer in drivers cabin
n
Temperature range up to 220°C
n
RESSENIG remote control incl. engine start/stop function
n
Insulated cover (detachable)
Trucknology® RoadShow 2016
Description of exhibits: Construction vehicles
TRS 692
TGS 26.480 6x6H BL
MAN HydroDrive© The flexible original.
Picture without trailer
3-way-tipper with trailer
MAN chassis specifications
Vehicle number
Order number
Payload at 40 t GCW [kg]
Motorisation
kW/ hp/ Nm (Top Torque)
Wheelbase/ overhang [mm]
Cab (WxL)
3 Way Tipper (Type W3H) on 2-axles trailer (Type P2T)
70S-0991
8000/ 00689
17,940
D2676LF45/ Euro 6
353/ 480/ 2,300 (2,500)
3,300 + 1,400/ 800
M (2,240 x 1,880 mm)
Drive train
n Gearbox ZF 16 S 252 OD
n MAN PriTarder ®
n FA VH-09 dropped, hydrostatically driven
(MAN HydroDrive ®), parabolic springs 9.5 t
n RA AP HPD-1382/HP-1352, i = 4.00, air suspension 2x 13 t
n Power take-off on flywheel side withpump connection,
spline hub profile DIN ISO 14 - 8x32x36 f=1.233
Fittings/ special features
n High-comfort driver´s seat with climate control
n Air deflector to stop dust swirling
n Field package Plus
n Air auxiliary heater Eberspächer D4S
n Trailer coupling Ringfeder 5050 A for central axle trailer
n Emergency Brake Assistant 2 (EBA2)
n Anti-spin regulator (ASR)
n Electronic stability program (ESP)
n Lane-Guard-System IV (LGS IV)
n Off-road logic for ABS
n Finisher brake, steering brake
n Protective grille for headlights and in front of radiator
n MAN CameraView - preparation for rear view camera
n
Technical data
n Clearance dimensions (LxW): n Height of side walls:
n Floor
4,720 x 2,410 mm
900 mm
5 mm, heavy duty steel HARDOX 450
n
Side walls 4 mm, high-strength structural steel
n
n
Front wall steady
n
STRENX 700, multi-bended
n
left: hydraulic HYDROBOARD ®, opens 180 degree
right: top and bottom hinged with spring compensation
Rear wall top hinged, opens automatically during tipping,
inside rear tipper frame (between posts), with chute along
the wall (demountable)
n
Hydraulics: U nder body hydraulic cylinder with knock-off
n
Rear posts fixed
valve, pneumatically operated from the cab
n Accessories:
n
n
Rubber and plastic fenders on side walls
Reflective tapes on the body ECE R48.03
n Painting:
Framework and tipper body shot blasted, primer and
final painted in selected RAL color
Trucknology® RoadShow 2016
Description of exhibits: Construction vehicles
TRS 703
TGS 32.400 8x4 BB
The weight optimized
concrete mixer.
Concrete mixer
MAN chassis specifications
Vehicle number
Order number
Payload at 32 t GVW [kg]
Motorisation
kW/ hp/ Nm (Top Torque)
Wheelbase/ overhang [mm]
Cab (WxL)
Stetter concrete mixer body AM 9 FHC-UltraEco
49S-3869
8000/ 00675
19,115
D2676LF47/ Euro 6
294/ 400/ 1,900 (2,100)
1,795 + 2,505 + 1,400/ 950
M (2,240 x 1,880 mm)
Drive train
n Gearbox ZF 12 AS 2130 DD MAN TipMatic ® Off-Road
n FA VOK-07/VOK-07 dropped, parabolic springs 7.5 t
n RA Hypoid HYD-1160/HY-1133, (light hypoid axle tandem),
i = 3,36, parabolic springs 10.5 t
n Top Torque (higher torque in gear 11+12)
n PTO at flywheel end with 6-hole flange
n Tires Goodyear 315/80R22.5 on Alcoa Dura Bright
Fittings/ special features
Fuel tank 300 l right hand side and 35 l AdBlue ®
n Regulated rocker arm brake (EVBec)
n Steering brake
n MAN EasyStart
n Anti-lock braking system (ABS)
n Anti-spin regulator (ASR)
n Electronic stability program (ESP)
n Air reservoir aluminium
n Radio MAN Media Truck Advanced with Navigation and
hands-free function ‚Comfort‘ for 2 mobile phones
n MAN-Sound-System
n Vehicle certification N3G
n
n
Technical data
n Nominal volume:
n Water line:
n Weight of mixer body:
n Aluminium water tank:
9 m³
10,200 l
3,260 kg
300 l
n
Drum wall made of hardened steel 400 HB (Brinell)
Mixing spirals made of hardened steel 500 HB (Brinell)
n Wear protection fo mixing spirals made of hardened steel
500 HB (Brinell), plug welded
n Gearbox ZF Ecomix II - CML
n Stop valve mounted in filling pipeline
n Water connection on both sides „C-coupling“
n LED-working spot light
n Frame covering
n Mudguard widening
n Splash guard for rear mudguards
n Electronic mixer control – SMART Control
n Electronic cab control – SMART Control
n Rear underride guard, hinged execution
n
Trucknology® RoadShow 2016
Description of exhibits: Construction vehicles
TRS 702
TGS 35.440 8x4 BB
The all-terrain and tough
concrete mixer.
Concrete mixer
MAN chassis specifications
Vehicle number
Order number
Payload at 32 t GVW [kg]
Motorisation
kW/ hp/ Nm (Top Torque)
Wheelbase/ overhang [mm]
Cab (WxL)
Liebherr Concrete mixer body Type HTM 904
37S-7319
8000/ 00674
17,780
D2676LF46/ Euro 6
324/ 440/ 2,100 (2,300)
1,795 + 2,505 + 1,400/ 950
M (2,240 x 1,880 mm)
Drive train
n Gearbox ZF 12 AS 2330 OD MAN TipMatic ® Off-Road
n MAN PriTarder ®
n FA VO-09/VO-09 straight, parabolic springs 8 t
n RA AP HPD-1353/HP-1333, i = 4,00, parabolic springs 13 t
n Top Torque (higher torque in gear 11+12)
n PTO at flywheel end with 6-hole flange
n Tires Goodyear 315/80R22.5
Fittings/ special features
Medium height design
n Fuel tank 300 l right hand side and 35 l AdBlue ®
n High-comfort driver´s seat with climate control
n MAN EasyStart for TipMatic ®
n Anti-lock braking system (ABS)
n Anti-spin regulator (ASR)
n Electronic stability program (ESP)
n Radio MAN Media Truck Advanced with Navigation and
hands-free function ‚Comfort‘ for 2 mobile phones
n MAN-Sound-System
n Vehicle certification N3G
n
n
n
Technical data
n Nominal filling: n Geometric drum volume: n Water volume: n Water tank: 9 m³
16 m³
10.2 m³
500 l
Electronic mixer control - Litronic ® EMC
n Ergonomic single-hand operation
n Stepless drum revolution speed adjustment
n Demand-driven automatic control of diesel engine
speed and torque
n Constant-Speed-Drive (drum rotates independently
of the diesel engine speed)
n Integrated memory function
n Functional design with background lighting
n Alternative operation of lever functions by means of
buttons as well
n Interrogation of operation parameters via CAN-Bus
n Start and Stop device for truck engine
n Driver’s cab operation for Litronic ® EMC
n Hydraulic drum drive, stepless with oil cooler
n Mixing drum in standard version made of special purpose
steel LH 37 (highly wear-resistant due to extremely hard
titanium carbon nitrides)
n Mixing drum discharge with 2nd drip ring
n Water shut-off valve below water tank
n Discharge chute with wear plate
n Various additional covers
n Rear view camera
n 2 extension chutes plastic in steel frame
n 1 working headlight in LED-technology,
fitted at ladder platform
Trucknology® RoadShow 2016
Description of exhibits: Construction vehicles
TRS 690
TGS 35.480 8x4 BB
Light but tough.
3-way-tipper
MAN chassis specifications
Vehicle number
Order number
Payload at 32 t GVW [kg]
Motorisation
kW/ hp/ Nm (Top Torque)
Wheelbase/ overhang [mm]
Cab (WxL)
DAUTEL Three-way-tipper body DK 4.56
37S-7379
8000/ 00687
17,720
D2676LF45/ Euro 6
353/ 480/ 2,300 (2,500)
1,795 + 2,505 + 1,400/ 800
M (2,240 x 1,880 mm)
Drive train
n Gearbox ZF 12 AS 2330 OD MAN TipMatic ® Offroad
Gearbox functionality: EfficientRoll
n MAN PriTarder ®
n FA VO-09/VO-09 straight, parabolic springs 8 t
n RA AP HPD-1382/HP-1352, i = 4.33, parabolic springs 13 t
n Power take-off on flywheel side withpump connection,
spline hub profile DIN ISO 14 - 8x32x36 f=1.233
Fittings/ special features
n MAN EasyStart for TipMatic ®
n High-comfort driver‘s seat with air suspension, lumbar
support, shoulder adjustment and heating
n Air auxiliary heater Eberspächer D4S
n Emergency brake assistant 2 (EBA2)
n Anti-spin regulator (ASR)
n Electronic stability program (ESP)
n Adaptive Cruise Control (ACC)
n MAN EfficientCruise 2
n Lane-Guard-System IV (LGS IV)
n Off-road logic for ABS
n Finisher brake
n Steering brake
Technical data
n Internal dimensions (LxW): n Side and rear panel height:
n Front wall height:
n Chute lenght:
n Capacity approx.: n
Tipper floor made of 5 mm high-tensile HARDOX 450
DAUTEL membrane-design
n
n
n
n
5,600 x 2,420 mm
1,050 mm
1,150 mm
405 mm
14.2 m 3
Side walls and tail gate made of 4 mm HARDOX 450,
Inboard tailgate pivot mounted with automatic lock
Bordmatik side wall left hand side, hydraulically tiltable
from the cab, 2-cylinder configuration, with powerful
kinematics at the front wall and second cylinder under the
the tipper body, self-adjusting locks in front and corner stakes
n
Right side wall pendular and foldable
n
2 ribs each in side walls
n
n
n
n
n
n
n
n
n
n
n
Dosing rod in the chute
Corner stakes fixed, elevated self-aligning bearings
16 recessed lashing eyes, tensile force 4 tons/each,
well accessible from in- and outside, according to
DIN 12640
2 lashing trays in front wall
PTO pump
Centrally arranged grease nipples for the tilt cylinder
Foldable rear bumper, according to EU regulations
One-piece aluminium mudguards with mudflaps
Shovel and broom holder
Stop block holder
Mounted access ladder on front wall
Trucknology® RoadShow 2016
Description of exhibits: Construction vehicles
TRS 704
TGS 35.480 8x4-4 BL
High payload
and maximum manoeuvrability.
Roll-off skip loader
MAN chassis specifications
Vehicle number
Order number
Payload at 32 t GVW [kg]
Motorisation
kW/ hp/ Nm (Top Torque)
Wheelbase/ overhang [mm]
Cab (WxL)
MULTILIFT roll-off skip loader body XR 26 S.61
92S-1603
8000/ 00713
18,360
D2676LF45/ Euro 6
353/ 480/ 2,300 (2,500)
3,600 + 1,350 + 1,450/ 2,000
M (2,240 x 1,880 mm)
Drive train
n Gearbox ZF 12 AS 2330 DD MAN TipMatic ® Offroad
n Gearbox functionality EfficientRoll
n MAN PriTarder ®
n FA VOK-09 dropped, parabolic springs 9.5 t
n RA Hypoid HYD-1370/HY-1350, i = 3.08, air suspension
n Trailing axle NOL-09 steered, lifting
n Top Torque (higher torque in gear 11+12)
n Power take-off on flywheel side withpump connection
n Tires Goodyear FA 385/65R22,5, RA 315/80R22,5
Fittings/ special features
Fuel tank 400 l right hand side and 60 l AdBlue ®
n High-comfort driver´s seat with climate control
n 2-Zyl. air compressor 720 ccm
n MAN EasyStart
n Construction-site step on front mudguard
n Lowering air springs to about 20 mm above stop,
during PTO operation
n Automatic setting of normal level from 20km/h
n Radio MAN Media Truck Advanced with navigation,
digital reception (DAB+), hands-free function
n
n
Technical data
n Lift and tipping capacity:
n Container length:
n Body level: n Hook Height:
26 t
6,100 mm
270 mm
1,570 mm
n Full hydraulic MULTILIFT load handling system
(Roll-off skip loader) acc. to EU Machine Directive with EU Certificate for container acc. to DIN 30722
n
n
n
n
n
n
n
n
n
High quality painting with zinc primer
Device control via compact operating panel with Can-Bus
cable, integrated contol lights and electromagnetic valve
actuation (PLC-controller) with 2-stage-curcuit
(low gear/fast gear) in both directions for lifting cylinders
Cabin Control and Radio Control
Friction Relief
Fast Speed and Fast Tipping function
Single-handed control: All basic functions can be controlled
with a single lever respectively with the new radio remote
control. By adjustment to the truck engine managemen
the programmable PLC-controller enables faster work and
clearly shorter loading and unloading cycles
Hydraulic body locking
Engine PTO
Underrun protection hydraulically adjustable
Trucknology® RoadShow 2016
Description of exhibits: Construction vehicles
TRS 694
TGS 35.480 8x6H BL
MAN HydroDrive© - The Original.
Halfpipe rear tipper
MAN chassis specifications
Vehicle number
Order number
Payload at 32 t GVW [kg]
Motorisation
kW/ hp/ Nm
Wheelbase/ overhang [mm]
Cab (WxL)
Carnehl Hardox half-pipe rear-dump body CMA/HS
59S-0388
8000/ 00692
17,925
D2676LF45/ Euro 6
353/ 480/ 2,300 (2,500)
1,795 + 2,505 + 1,400/ 800
M (2,240 x 1,880 mm)
Drive train
n Gearbox ZF 16 S 252 OD
n MAN PriTarder ®
n FA VO-09/VH-09 straight, hydrostatically driven
(MAN HydroDrive ®), parabolic springs 9.5 t
n RA AP HP-1352, i = 4.00, air suspens. 2x 13 t
n PTO at flywheel end with 6-hole flange (100D)
f=1.233 650 Nm continuous load - 720 Nm brief load
Fittings/ special features
High-comfort driver´s seat with climate control
n Co-driver‘s seat static (longitudinal/ seat back adjustment)
n Air deflector to stop dust swirling
n Field package Plus
n Vertical exhaust silencer on rack at right hand side
n Anti-lock braking system (ABS)
n ECAS air suspension
n Finisher brake
n Parking brake with pneum. applic. of front wheel brakes
n Construction-site step on front mudguard (driver‘s side)
n Protective grille for headlights
n Radio MAN Media Truck Advanced with navigation system
n MAN CameraView - Preparation for rear view camera
n
n
Technical data
n Clearance dimensions (LxW) aprox.: 5,450 x 2,340 mm
n Wall heights (all around) approx.:
1,460 mm
n Load capacity approx.
17 m 3
n Body weight (DIN 70020) approx: 3,350 kg
n Subframe
n
n Reinforced
n
n
Hollow-section side members with springmounted,
flexible and fixed (in thrust direction) chassis mounts
welded structure for half-pipe body
n
Integrated front-ram brackets with tank bracket
n
bracket for drop-in safety prop
Reinforced tipping shaft for wide body support
Rear-tipping hydraulic system (Edbro/ 170 bar)
n
Front ram CS 15-4-4606
n
Engine power-takeoff
n
n
120/84 l tank with tipping valve and associated lines
Rear-dump body 5 mm HARDOX 450 HB steel, add. 6-mm
reinforcement under body floor, pointed toward the front
n
Tailgate 6-mm QSTE 690 steel, flush with body top edge,
n
Cramaro liding tarpaulin model C for 6.5 - 7 m upper body
with automatic 2-hook central locking mechanism
length incl. hinged bow as automatic rear end, 2-channel
radio remote control; drive motor at bulkhead, continuous
Z-profile rail, bow height 400 mm, protective roof length
550 mm, PVC tarpaulin
n
Hinged underride guard CMA, compatible with asphalt
n
Plastic half-shell fenders at rear axles with mud flaps
underride guard
spreaders
n
Lean-on aluminium ladder with bracket on lateral
Trucknology® RoadShow 2016
Description of exhibits: Construction vehicles
TRS 625
TGS 41.480 8x8 BB
Maximum traction.
Rear tipper
MAN chassis specifications
Vehicle number
Order number
Payload at 32 t GVW [kg]
Motorisation
kW/ hp/ Nm
Wheelbase/ overhang [mm]
Cab (WxL)
1-way half-pipe rear tipper body type W1U
96S-1412
8000/ 00600
14,340
D2676LF25/ Euro 6
353/ 480/ 2,300
1,795 + 2,980 + 1,400/ 800
M (2,240 x 1,880 mm)
Drive train
n Gearbox ZF 16S 252 OD
n MAN PriTarder ®
n Transfer case G253 - permanent all-wheel-drive
n Front axle VP-09/VPD-09 driven, parabolic spring 9.5 t
n Rear axle HPD-1382/HP-1352, i = 4.0, p arabolic spring 16 t
n PTO NH/4C, without flange, f = 1.17/1.40
n Tires Continental FA 14.00 R 20, RA 12.00 R 24 (quS)
Fittings/ special features
n Off-road ABS, Emergency brake signal (ESS)
n Hill climbing brake; shunting light on step unit
n Orlaco, rear area and cargo survellance camera
n Driver‘s comfort seat with climate control
n Co-driver‘s bench (2 pers./ single seats)
n Radio MMT with navigation
n MAN Sound System
n Construction-site step on front mudguard with handle
n Fuel tank 300 l Diesel and 35 l Adblue ®
n Towing coupling ROCKINGER SK5
n
Technical data
n Clearance dimensions (LxW): n Capacity: 6.15 x 1.35 m
19 m 3
Durable and resistant 1-way tipper for
heavy construction works
n Weight optimised body designed with attention to
every detail
n Greater volume and lower center of gravity ensured
by unique omega shape of body
n Half-pipe shape enabling optimal discharging of load
n Tipper made of high quality HARDOX 450 steel,
n
7 mm on the floor and 5 mm on the sides
n Subframe made of high quality steel, reinforced in the rear
n Stabilizer between body and subframe for safety reasons
n Rear wall highlifted by 2 hydraulic cylinders provides
greater area for load
n Front wall sloped to prevent against sticking of the load
in the corners, easy demountable small roof
n Lateral protection plates on sides to protect chassis
components against falling load
n High pressure hydraulic system with new generation
front cylinder ensures high speed of tip up and down
n Rear underrun protection, foldable by means of springs
n HYFIX system - locking the body on the subframe
n Tarpaulin rolled on front wall
n Resistant aluminium mudguards for rear axles
n Steel grate protecting rear lamps
n Shovel with brackets mounted under the body
n Subframe and body painted with high quality zinc
primer and final paint 2K
Trucknology® RoadShow 2016
Description of exhibits: Construction vehicles
TRS 691
TGX 18.480 4x4H BLS
MAN HydroDrive© - The Original.
Semi-trailer tipper
MAN chassis specifications
Vehicle number
Order number
Payload at 40 t GCW [kg]
Motorisation
kW/ hp/ Nm (Top Torque)
Wheelbase/ overhang [mm]
Cab (WxL)
Schmitz semitrailer with halfpipe dumper
22X-1186
8000/ 00700
25,549
D2676LF45/ Euro 6
353/ 480/ 2,300 (2,500)
3,600/ 800
XL (2.440 x 2.280 mm)
Drive train
n Gearbox ZF 16 S 252 OD, MAN ComfortShift
n MAN PriTarder ®
n FA VHK-09 dropped, hydrostatically driven
(MAN HydroDrive ®), parabolic springs 8 t
n RA Hypoid HY-1350, i = 3,36, air suspension 13 t
n PTO NH/1C without flange f=0.91/1.09 rhs, horizontal
Fittings/ special features
n High-comfort driver´s seat with air suspension, climate
control, lumbar support and heating
n Co-driver‘s seat high-comfort, with air suspension
n Bus-stop brake
n Air deflector to stop dust swirling
n Air auxiliary heater Eberspächer D4S
n Emergency brake assistant 2 (EBA2)
n Anti-spin regulator (ASR)
n Electronic stability program (ESP)
n Lane-Guard-System IV (LGS IV)
n Off-road logic for ABS
n Stoneguard grille in front of radiator
n Working platform with step and grab handle
n Protective grille for headlights
Technical data
n Inner dimensions (LxWxH):
n Capacity: n
Semitrailer of welded fine grain steel, load distribution for
n
Folding rear underrun bar, suitable for tarmac machine
n
7,300 x 2,354 x 1,660 mm
27.5 m³
2-axle tractor, axle distance 1.310/ 1.310 mm
n
Front lift axle autom./pneum. with traction increase, electr.
(lifting of loaded axle)
n
Hydraulic: low pressure cylinder 170 bar (HYVA/GEORG)
n
Dual line brake system according to RR EG 71/320
n
n
n
n
n
n
n
n
n
n
3 x SCB-air suspension type MRH-KU35
EBS 2S/2M, electronic braking system including RSP
(Rollover stability program)
EBS power supply by ISO 7638 socket + CAN bus
Automatic air suspension dump
Raise-lower valve with AUTO-RESET function
Jost „MODUL“ landing legs, compensating foot, one side
operation, brace, low maintenance
A-plate for the transport of waste products
Steel half pipe body SKI 24 SL 7.2
Front bulkhead, 17° inclined with reinforcements for front lifter
Working platform with ascent r.h.s. and ladder for body
access (height up to 1.660 mm)
n
Sidewalls (4 mm) and SR-floor troughs (5 mm) from SCB 450
n
Steel top hinged tail gate,inboard with shute 17° inclined,
n
PVC roller curtain, curtain winding profile + lateral stops,
n
Reflecting tapes, yellow (rear and on sideboards)
steel, wear coeff. => 250KW/mm, Beul coeff. => 160J/mm²
2 hooks
curtain tensioning at rear with tension rubbers to the bottom
Trucknology® RoadShow 2016
Description of exhibits: Construction vehicles
TRS 685
TGX 33.560 6x4 BL
The flexible 6x4 as a power pack.
3-way-tipper with centre-axle trailer
MAN chassis specifications
Vehicle number
Order number
Payload at 33 t GCW [kg]
MEILLER 3-way tipper D316 with centre-axle trailer
30X-3751
8000/ 00658
22,325
Motorisation
D3876LF01/ Euro 6
kW/ hp/ Nm
412/ 560/ 2,700
Wheelbase/ overhang [mm]
Cab (WxL)
3,300 + 1,400/ 800
XL (2,440 x 2,280 mm)
Drive train
n Gearbox ZF 12 TX 2821 OD MAN TipMatic ® with ZF-Intarder
n Gearbox functionalities: Rocking free, EfficientRol
n FA VO-09 straight, parabolic springs 9.5 t
n RA AP HPD-1382/HP-1352, i = 4.00, air suspension 2x 13 t
n Power take-off on flywheel side withpump connection,
spline hub profile DIN ISO 14 - 8x32x36 f=1.42
Fittings/ special features
Bus-stop brake
n MAN EasyStart for TipMatic ®
n High-comfort driver´s seat with climate control
n Air deflector to stop dust swirling
n Air auxiliary heater Eberspächer D4S
n Trailer coupling RINGFEDER 4040G 150A
for central axle trailer
n Emergency Brake Assistant 2 (EBA2)
n Anti-spin regulator (ASR)
n Electronic stability program (ESP)
n Lane-Guard-System IV (LGS IV)
n Off-road logic for ABS, Steering brake
n MAN EfficientCruise
n Parking brake with pneumatic applic. of front wheel brakes
n
n
Technical data (tipper and centre-axle trailer)
n Clearance dimensions (LxW): 4,900 x 2,380 x 900 mm
n Struck capacity approx.:
10.5 m³
n Floor/ M-Jet walls:
5 mm HB 450/ 4 mm HB 400
n
Reinforcement chassis subframe
MEILLER continuously running pump
n Hydraulic drop-down Meiller Bordmatic side wall on the left
n Top-hinged side wall on the right, top-hinged tailgate with
autom. cam lock and integrated delivery chute of 150 mm
n Corner posts on both ends of the tipper body
n 2-circuit hydraulic connection for tipping trailer with
Bordmatic
n Aluminium checker plate mudguards
n Alu-access ladder with bracket on mudguard on the right
n 12 retractable lashing eyes
n Lateral MEILLER roll-over tarpaulin (tarpaulin colour black)
n Folding underride guard
n
MEILLER centre-axle tipping trailer MZDA 18/22
n
Hydraulic drop-down Meiller Bordmatic side wall on the left
Top-hinged side wall on the right, top-hinged tailgate with
autom. cam lock and integrated delivery chute of 150 mm
n Corner posts on both ends of the tipper body
n Front wall 900 mm with access ladder
n 12 retractable lashing eyes
n MEILLER high-pressure hydraulic system
n Two air-suspended BPW 9-ton-axles with drum brakes,
tyres 385/65 R 22.5 on aluminium rims
n Halfshell-mudguards
n Rigid underride guard
n Lateral MEILLER roll-over tarpaulin (tarpaulin colour black)
n
Trucknology® RoadShow 2016
Description of exhibits: Construction vehicles
TRS 686
TGX 33.560 6x4 BLS
The 6x4 semitrailer tipper
as a power pack.
Semitrailer tipper
MAN chassis specifications
Vehicle number
Order number
Payload at 33 t GCW [kg]
Body specification
30X-2860
8000/ 00659
24,135
Motorisation
D3876LF01/ Euro 6
kW/ hp/ Nm
412/ 560/ 2.700
Wheelbase/ overhang [mm]
Cab (WxL)
3,300 + 1,400/ 700
XL (2,440 x 2,280 mm)
Drive train
n Gearbox ZF 12 TX 2821 OD MAN TipMatic ® with ZF-Intarder
n Transmission software (TipMatic OFFROAD) for heavy
transport vehicles 70 t up to 120 t
n FA VO-09 straight, parabolic springs 9.5 t
n RA AP HPD-1382/HP-1352, i = 4.00, air suspension 2x 13 t
n Power take-off on flywheel side withpump connection,
spline hub profile DIN ISO 14 - 8x32x36 f=1.42
Fittings/ special features
n Bus-stop brake
n MAN EasyStart for TipMatic ®
n High-comfort driver´s seat with climate control
n Air deflector to stop dust swirling
n Air auxiliary heater Eberspächer D4S
n Emergency Brake Assistant 2 (EBA2)
n Anti-spin regulator (ASR)
n Electronic stability program (ESP)
n Lane-Guard-System IV (LGS IV)
n Off-road logic for ABS, Steering brake
n Parking brake with pneumatic applic. of front wheel brakes
n Stoneguard grille in front of radiator
n Entry lighting for driver and co-driver
Technical data
n Clearance dimensions (LxW): 7,600 x 2,300 x 1,500 mm
n Capacity approx.: 24 m 3
n
Steel Halfpipe body, walls made of 5 mm and floor 6 mm
n
highly wear-resistant steel HB 450, exterior top-hinged
tailgate with automatic draw hook lock
n
n
Tyre equipment 4-fold with 385/65 R 22.5 S+G on steel disc
Automatic lowering during tipping in order to increase
stability, can be switched off when using finisher
n
With stabilizing MEILLER telescopic ram, single-line,
n
In accordance with EG regulations 24 Volt, five chamber
hydraulic high-pressure hose with screw coupling DN 20
lights with integrated triangle reflector, single-row number
plate lights, contour lamps, yellow side marker lamps and
white marker lamps with retro-reflecting reflector
n
½-shell mudguards made of plastic
n
Lateral protection
n
n
n
n
n
n
n
n
n
n
2 wheel chocks with holder
1st axle liftable during empty drive, automatically loaddependent, starting aid
Operating platform and roll-up tarpaulin
Tube suspension
Telescopic landing gears
Digital information module with display (Smartboard)
2 working headlights in the rear
Shovel / broom holder
ECE plate
A plate
Trucknology® RoadShow 2016
Description of exhibits: Construction vehicles