Lighting and Lighting Accessories - el
advertisement
EXIT SIGN Commercial
COOPER LIGHTING - SURE-LITES®
DESCRIPTION
CCX SERIES
Polycarbonate
AC Only
DIMENSIONS
The CCX Series Contractor’s
Choice Exit is an economical,
attractive, alternative to metal
exits. Contemporary round
corner styling, designer
finish, and consistent family
appearance enables it to blend
with any decor. The tough
injection molded polycarbonate
materials resist discoloration.
All components, including
canopy and chevron directional
indicators, are of snap-fit
construction to facilitate
installation.
6" (152mm)
3/4"
(19mm)
4 1/2"
(114mm)
8"
(203mm)
2 3/4"
(70mm)
13" (330mm)
Incandescent,
Fluorescent, LED Lamping
EXIT LIGHTING
• Dual voltage input
120/277 VAC, 60 Hz
• Injection molded, high
impact, polycarbonate
housing
• Designer white textured
finish standard (Black
Available-Fluorescent Only)
• AC LED: long life LED lamp
modules
• AC fluorescent: two 5W
F5TT lamps
• AC incandescent: two
145V, 15W T6 lamps
(candelabra base)
• Ceiling, wall or end
mountable
O R D E R I N G I N F O R M AT I O N
SAMPLE NUMBER: CCX20RWH
CCX
Family
CCX=Contractor’s
Choice Exit
Series
2=AC Only with 145V,
15W T-6 AC
Incandescent Lamps
4=AC Only with 5W F5TT
Compact Fluorescent
Lamps
6=AC only with
LED Lite Stix™
Face Options
0=Universal
1=Single Face
2=Double Face
Battery
Blank=No Battery
• Universal J-box mounting
pattern
• Push-in power connectors
facilitate installation
• Snap-fit canopy included
Factory
Options
Blank=No Options
65=Tamperproof
Screws
95=AC Fire Alarm
Interface (for
Incandescent &
LED)
Letter Colors (1)
R=Red
G=Green
RWO=Red on White(1)
GWO=Green on White(1)
WRO=White on Red(1)
WGO=White on Green(1)
O=Open Face(1)
Housing Finishes
BK=Black
(Fluorescent Only)
WH=White
Voltage
Blank=120 VAC
7=120/277 VAC
(for Incandescent
& Fluorescent)
7=277 VAC
(LED only)
47=120/347 VAC
(Incandescent
only)
Factory Options
2C=Two Circuit Operation includes 7W lamps
(Fluorescent Only)
C7=130V, 7W C-7 AC
Incandescent Lamps
(Incandescent Only)
7W=7W Compact Fluorescent
Lamps (Fluorescent Only)
Accessories (Order Separately)
CCX18PKBK=18” Pendant Kit, Black
CCX18PKWH=18” Pendant Kit, White
CCX18PKHTBK=18” Hang-True
Pendant Kit, Black
CCX18PKHTWH=18” Hang-True
Pendant Kit, White
CCX6 (2)=Two-Lamp 6V DC Lamp Kit
CCX12 (2)=Two-Lamp 12V DC Lamp Kit
CCX63 (2)=Three-Lamp 6V DC Lamp Kit
CCX123 (2)=Three-Lamp 12V DC Lamp Kit
CCX277=277V Conversion Kit
VRSD=Tamper Resistant Screwdriver
WG10=Surface, Wire Guard
WGS11=Ceiling, End Wire Guard
VS1=Polycarbonate Vandal Shield
VS1WP=Polycarbonate Vandal Shield Weatherproof
• Components are snap-fit
construction, reinforcing
ribs add strength
• Snap-out chevron
directional indicators
• UL FTBR Listed with 2C
option (7W Lamps Only.
Fluorescent Exits Only.)
• Damp Location Listed, UL
924 Listed, Life Safety
NFPA 101, CSA Certified,
NEC/OSHA, most state and
local codes, suitable for
floor proximity installation
• Patent No. 5,735,498 and
5,678,336
644
COOPER LIGHTING
Energy Data
Incandescent Exits
Input Power:
Input Current(Max.): Power Factor:
120V
277V
120V 277V
120V 277V
Incandescent Exits -15W Lamps
23.1W 30.0W
.19A
.19A
Incandescent Exits -7W Lamps
12.5W 19.6W
.10A
.17A
Fluorescent Exits
Fluorescent Exits -5W Lamps
16.3W 24.4W
.14A
.33A
>.97 >.27
Fluorescent Exits - 7W Lamps
18.0W 26.2W
.15A
.31A
>.97 >.33
Fluorescent Exits -7W Lamps (2C Option)8.7W 13.3W
.16A
.14A
>.45 >.34
All ratings are per circuit
LED Exits
LED Exits- Red Letters
1.8W
2.6W
.09A
.11A
>.17 >.09
LED Exits - Green Letters
3.2W
4.5W
.08A
.10A
>.33 >.15
T.H.D.:
120V 277V
<20% <25%
<23% <29%
<11% <28%
<18% <10%
<28% <16%
NOTES: (1) Available only for incandescent and fluorescent versions. GWO, RWO, WGO, and WRO are open face style lenses with “EXIT” legend.
Use “O” option for ordering special wording-lenses ordered separately (consult your Cooper Lighting Representative). (2) Two-lamp kits are for use
with white housings, three-lamp kits are required for black housings.
DIMENSIONS
DESCRIPTION
6" (152mm)
3/4" (19mm)
4 1/2"
(114mm)
10"
(254mm)
2 3/4"
(70mm)
13" (330mm)
The CCX Series Contractor’s
Choice Exit is an economical,
attractive, alternative to metal
exits. Contemporary round
corner styling, designer
finish, and consistent family
appearance enables it to blend
with any decor. The tough
injection molded
polycarbonate materials resist
discoloration. All components,
including canopy and chevron
directional indicators, are of
snap-fit construction to
facilitate installation.
EXIT SIGN Commercial
COOPER LIGHTING - SURE-LITES®
CCX SERIES
Polycarbonate
Self-Powered
Incandescent,
Fluorescent,
LED Lamping
EXIT LIGHTING
O R D E R I N G I N F O R M AT I O N
SAMPLE NUMBER: CCX30RWHSD
• Dual-voltage input
120/277VAC, 60Hz
CCX
Family
CCX=Contractor’s
Choice Exit
Series
3=Self-Powered with
145V, 15W T-6 AC
Incandescent Lamps
5=Self-Powered with
5W F5TT Compact
Fluorescent Lamps
7=Self-Powered with
LED Lite Stix™
Face Options
0=Universal
1=Single Face
2=Double Face
Battery
Blank=Lead Calcium
70=Nickel Cadmium
Factory
Options
Blank=No Options
20=Flasher
30=Flasher / Buzzer
65=Tamperproof
Screws
90=Self-Powered
Fire Alarm
Interface (except
fluorescent)
Letter Colors (1)
R=Red
G=Green
RWO=Red on White(1)
GWO=Green on White(1)
WRO=White on Red(1)
WGO=White on Green(1)
O=Open Face(1)
Housing Finishes
BK=Black
(Fluorescent Only)
WH=White
Voltage
Blank=120/277
VAC
47=120/347 VAC
(Series 3 and 7
only)
Factory Options
C7=130V, 7W C-7 AC
Incandescent Lamps
(Incandescent Only)
7W=7W Compact Fluorescent
Lamps (Compact fluorescent
Only)
SD=Self-Diagnostics
Accessories (Order Separately)
CCX18PKBK=18” Pendant Kit, Black
CCX18PKWH=18” Pendant Kit, White
CCX18PKHTBK=18” Hang-True
Pendant Kit, Black
CCX18PKHTWH=18” Hang-True
Pendant Kit, White
VRSD=Tamper Resistant Screwdriver
WG10=Surface, Wire Guard
WGS11=Ceiling, End Wire Guard
VS1=Polycarbonate Vandal Shield
VS1WP=Polycarbonate Vandal Shield Weatherproof
• Injection molded, high impact,
polycarbonate housing
• Designer white textured finish
standard (black available fluorescent only)
• AC LED: long life LED lamp
modules
• AC fluorescent: two 5W
F5TT lamps
• AC incandescent: two
145V, 15W T6 lamps
(candelabra base)
• DC: two 6V, 3.6W lamps
(white housing); three 6V,
3.6W lamps (black housing)
• Lead Calcium or Premium
Nickel Cadmium battery
• Universal J-box mounting
pattern
Energy Data
Charge Mode (Discharged Battery): Sealed Lead Calcium Battery
Input Power:
Input Current(Max.): Power Factor:
120V
277V
120V 277V
120V 277V
Incandescent Exits -15W Lamps
32W
32W
.28A
.12A
>.95 >.95
Incandescent Exits -7W Lamps
22W
22W
.20A
.09A
>.91 >.90
Fluorescent Exits -5W Lamps
25W
25W
.23A
.10A
>.90 >.90
Fluorescent Exits - 7W Lamps
28W
28W
.25A
.11A
>.93 >.92
LED Exits- Red Letters
10.4W 10.8W
.10A
.04A
>.89 >.88
LED Exits - Green Letters
11.9W 12.3W
.10A
.05A
>.96 >.94
T.H.D.:
120V 277V
<17% <19%
<24% <26%
<21% <23%
<23% <23%
<45% <48%
<29% <33%
Standby Mode (Fully Charged Battery) Sealed Lead Calcium Battery Input Power consumption is reduced by
approximately 7.5 Watts
in the standby operating mode
Sealed Nickel Cadmium Battery
Incandescent Exits -15W Lamps
26W
26W
.24A
.10A
>.94 >.93
<17% <19%
Incandescent Exits -7W Lamps
15.8W 15.9W
.15A
.06A
>.84 >.83
<29% <27%
Fluorescent Exits -5W Lamps
19.9W 19.6W
.20A
.08A
>.85 >.84
<29% <31%
Fluorescent Exits - 7W Lamps
22W
21W
.21A
.09A
>.89 >.89
<31% <31%
LED Exits- Red Letters
4.8W
4.7W
.05A
.02A
>.76 >.73
<63% <68%
LED Exits - Green Letters
6.1W
6.0W
.06A
.03A
>.88 >.85
<47% <52%
(1) Available only for incandescent and fluorescent versions. GWO, RWO, WGO, and WRO are open face style lenses with “EXIT” legend. Use “O”
option for ordering special wording-lenses ordered separately (consult your Cooper Lighting Representative).
• Components are snap-fit
construction, reinforcing ribs
add strength
• Snap-fit canopy included
• Suitable for floor proximity
installation
• Line-latching, Solid-State
voltage limited charger ,
Solid-State switching, lowvoltage disconnect, brownout
circuit, overload/short-circuit
protection, test switch/power
indicator light
• UL 924 Listed, life safety NFPA
101, CSA Certified,
NEC/OSHA, most state and
local codes
• Patent No. 5,735,498 and
5,678,336
COOPER LIGHTING
645
EXIT SIGN Commercial
COOPER LIGHTING - SURE-LITES®
DIMENSIONS
DESCRIPTION
The CCX Series Contractor’s
Choice Exit is an economical,
attractive, alternative to metal
exits. Contemporary round
corner styling, designer
finish, and consistent family
appearance enables it to blend
with any decor. The tough
injection molded polycarbonate
materials resist discoloration.
All components, including
chevron directional indicators,
are of snap-fit construction to
facilitate installation.
6 3/8"
max
(162mm)
17 1/2" max (445mm)
4 3/4"
(121mm)
SURE-LITES
8"
(203mm)
2 3/4"
(70mm)
13" (330mm)
CCX SERIES
CCXH SERIES
O R D E R I N G I N F O R M AT I O N
Polycarbonate
Self-Powered
High Power
(Remote Capacity)
Double Heads
Incandescent, Compact
Fluorescent, LED Lamping
EXIT LIGHTING
• Dual-voltage input
120/277VAC, 60Hz
• Injection molded, high impact,
polycarbonate housing
• Designer white textured finish
standard (black availablefluorescent only)
• AC LED: long life LED lamp
modules
• AC fluorescent: two 5W
F5TT lamps
SAMPLE NUMBER: CCX31RWHDH
Family
CCX=Contractor’s
Choice Exit
CCXH=High Output
Remote capacity
Series
3=Self-Powered with
145V, 15W T-6 AC
Incandescent Lamps
5=Self-Powered with
5W F5TT Compact
Fluorescent Lamps
7=Self-Powered with
LED Lite Stix™
Face Options (1)
0=Universal
1=Single Face
2=Double Face
Factory
Options
Blank=No Options
20=Flasher
30=Flasher / Buzzer
65=Tamperproof
Screws
90=Self-Powered Fire
Alarm Interface
(for Incandescent
& LED)
• DC: two 6V, 3.6W lamps (three
for black housing)
• Lead Calcium batteries
• Universal J-box mounting
pattern
• Components are Snap-fit
construction, reinforcing ribs
add strength
• Line-latching, Solid-State
voltage limited charger, SolidState switching, low-voltage
disconnect, brownout circuit,
overload/short-circuit
protection, test switch/ power
indicator light
• UL 924 Listed, Life Safety
NFPA 101, NEC/OSHA, most
state and local codes
• Patent No. 5,735,498 and
5,678,336
Letter Colors
R=Red
G=Green
RWO=Red on White(2)
GWO=Green on White(2)
WRO=White on Red(2)
WGO=White on Green(2)
O=Open Face(2)
Battery
Blank=Lead Calcium
COOPER LIGHTING
Voltage
Blank=120/277 VAC
47=120/347 VAC (for
Incandescent
& LED)
Heads
DH=Double Heads
DH0=Remote Capacity
No Heads
DH1L=Single Head Left
(near “E” in “EXIT”)
DH1R=Single Head Right
(near “T” in “EXIT”)
DHMRT=MR16 Heads
(5W Standard)
DHSQ=Square Heads
(5.4W Standard)
Accessories (Order Separately)
CCXDHMBBK=CCX-DH Ceiling Mounting
Bracket, Black
CCXDHMBWH=CCX-DH Ceiling
Mounting Bracket, White
VRSD=Tamper Resistant Screwdriver
WG2=Wire Guard
VS2=Polycarbonate Vandal Shield
VS2WP=Polycarbonate Vandal Shield Weatherproof
Energy Data
Charge Mode (Discharged Battery): Sealed Lead Calcium Battery
Input Power:
Input Current(Max.):
Power Factor:
T.H.D.:
120V 277V 347V
120V 277V 347V
120V 277V
120V 277V
Incandescent Exits -15W Lamps
35W 34W
22W
.30A .13A .13A
>.96 >.95
<16% <18%
Incandescent Exits -7W Lamps
24W 25W 29.1W
.22A .10A .14A
>.93 >.92
<21% <23%
Charge Mode (Discharged Battery): Sealed Lead Calcium Battery
Fluorescent Exits -5W Lamps
28W 28W
.25A .11A
>.93 >.93
<19% <21%
Fluorescent Exits - 7W Lamps
30W 30W
.26A .12A
>.94 >.93
<21% <23%
Standby Mode (Fully Charged Battery) Sealed Lead Calcium Battery Input Power consumption is reduced by
approximately 5 Watts
in the standby operating mode
Charge Mode (Discharged Battery): Sealed Lead Calcium Battery
LED Exits- Red Letters
12.6W 13.2W 7.0W
.11A .05A .09A
>.91 >.91
<39% <42%
LED Exits - Green Letters
15.8W 15.4W 8.4W
.14A .06A .09A
>.97 >.96
<25% <29%
Standby Mode (Fully Charged Battery) Sealed Lead Calcium Battery Input Power consumption is reduced by
approximately 5 Watts in the standby operating mode
NOTE: (1) Exits using two faces must also use CCXDHMB Mounting Bracket for ceiling mounting (included in Universal and Double Face
configurations). (2) Available only for incandescent and fluorescent versions. GWO, RWO, WGO, and WRO are open face style lenses with
“EXIT” legend. Use “O” option for ordering special wording-lenses ordered separately (consult your Cooper Representative).
W AT TA G E R AT I N G S
CCX-DH
646
Factory Options
C7=130V, 7W C-7 AC
Incandescent Lamps
(Incandescent only)
7W=7W Compact Fluorescent
Lamps (Fluorescent only)
SD=Self-Diagnostics
(2)
• AC Incandescent: two 145V,
15W T6 lamps
(candelabra base)
• Heads: two 6V, 9W PAR36
style lamps (7.2W for black)
housing) (specify DH in
catalog number)
Housing
Finishes
BK=Black
(Fluorescent
Only)
WH=White
Lead Calcium Battery=27W for 1 1/2 hrs.; 24W for 2 hrs.
CCXH-DH
Lead Calcium Battery=32W for 1 1/2 hrs.
EXIT LIGHTING Commercial
COOPER LIGHTING - SURE-LITES®
DIMENSIONS
DESCRIPTION
The Sure-Lites Self-powered
Standard Steel Exit Series provides
the ideal exits for general purpose
applications. An extensive range of
field installed accessories, choice of
faces and a variety of mounting
configurations permit the tailoring of
the basic exit for almost any
application. This exit features durable
steel construction, attractive styling
and high efficiency illumination.
6 7/8"
(175mm)
4 5/8"
(117mm)
2 1/4" (57mm)
1 1/4" (32mm)
12 1/4"
(311mm)
7 1/2"
(191mm)
EP/EPH/UN/UNH/
PLX SERIES
12 1/4" (311mm)
STEEL EXITS – SELF-POWERED INCANDESCENT
Type
Steel Exits
Self-Powered Emergency
Incandescent,
Fluorescent Lamps
Mounting
Single face
Single face w/Canopy
Double face w/Canopy
Universal (1)
Universal Open Face (2)
Stencil Face, White Finish
Red Letters
Green Letters
Wall
EP1R1
EP1G1
Wall/Ceiling/End EP1R1C
EP1G1C
Ceiling/End
EP1R2C
EP1G2C
Wall/Ceiling/End UN1SRW
UN1SGW
Wall/Ceiling/End UN1OFW (specify lens)
Stencil Face, Black Finish
Red Letters
Green Letters
EP1R1B
EP1G1B
EP1R1CB
EP1G1CB
EP1R2CB
EP1G2CB
UN1SRB
UN1SGB
UN1OFB (specify lens)
Stencil Face, Black/Silver Finish
Red Letters
Green Letters
EP1R1BS
EP1G1BS
EP1R1CBS
EP1G1CBS
EP1R2CBS
EP1G2CBS
UN1SRBS
UN1SGBS
UN1OFBS (specify lens)
EXIT LIGHTING
STEEL EXITS – SELF-POWERED INCANDESCENT WITH ADDITIONAL OUTPUT TO POWER REMOTES
• Dual-voltage input
120/277VAC, 60Hz
• Line-latching, Solid-State
voltage limited charger,
Solid-State switching, lowvoltage disconnect,
brownout circuit,
overload/short-circuit
protection, test
switch/power indicator
light
Single face
Single face w/Canopy
Double face w/Canopy
Universal (1)
Universal Open Face (2)
Wall
Wall/Ceiling/End
Ceiling/End
Wall/Ceiling/End
Wall/Ceiling/End
EPH1R1
EPH1G1
EPH1R1C
EPH1G1C
EPH1R2C
EPH1G2C
UNH1SRW
UNH1SGW
UNH1OFW (specify lens)
EPH1R1B
EPH1G1B
EPH1R1CB
EPH1G1CB
EPH1R2CB
EPH1G2CB
UNH1SRB
UNH1SGB
UNH1OFB (specify lens)
EPH1R1BS
EPH1G1BS
EPH1R1CBS
EPH1G1CBS
EPH1R2CBS
EPH1G2CBS
UNH1SRBS
UNH1SGBS
UNH1OFBS (specify lens)
PLX6200RB
PLX6200GB
PLX6200OB (specify lens)
PLX6200RBS
PLX6200GBS
PLX6200OBS (specify lens)
STEEL EXITS – SELF-POWERED FLUORESCENT
Universal (1)
Wall/Ceiling/End PLX6200RP
PLX6200GP
Universal Open Face (2) Wall/Ceiling/End PLX6200OP (specify lens)
STEEL EXITS – SELF POWERED FLUORESCENT WITH ADDITIONAL OUTPUT TO POWER REMOTES
Universal (1)
Wall/Ceiling/End
Universal Open Face (2) Wall/Ceiling/End
PLX7200RP
PLX7200GP
PLX7200OP (specify lens)
PLX7200RB
PLX7200GB
PLX7200OB (specify lens)
PLX7200RBS
PLX7200GBS
PLX7200OBS (specify lens)
W AT TA G E R AT I N G S
• 20 gauge steel housing
• Universal pattern
knockouts
• Knockouts for chevron
directional indicators
• Canopy (where supplied)
allows ceiling or end
mounting
• Universal styles offer
complete installation
flexibility with canopy,
backplate, and 2 stencil
faces
EP, UN
EPH, UNH
PLX-6200
PLX-7200
(1)
(2)
O R D E R I N G I N F O R M AT I O N
SAMPLE NUMBER: UNH170SRWSD
Model
Number
See chart
• AC incandescent: two 20W
T6 1/2 intermediate base
lamps-DC: two 6V, 3.6W DC
Lamps
• UL 924 Listed, Life Safety
NFPA 101, NEC/OSHA,
most state and local codes
442
COOPER LIGHTING
Nickel Cadmium=15W for 1 1/2 hrs; 12W for 2 hrs.
Nickel Cadmium=24W for 1 1/2 hrs.; 18W for 2 hrs.
Nickel Cadmium = 15W for 1 1/2 hrs.; 12W for 2 hrs.
Nickel Cadmium = 24W for 1 1/2 hrs.; 18W for 2 hrs.
Universal Face Exits include two stencil faces, canopy and backplate
For Open Face Exits, specify lens desired: 004346SP-red letters, white background; 004347SP - green letters, white background;
004340SP - white letters, red background; 004341SP-white letters, green background;
Special wording, consult your Cooper Lighting Representative. Order Separately.
• Louvered downlight
• AC fluorescent: two 5W
F5TT lamps-DC: three 6V,
3.6W DC lamps
Lead Calcium=10.8W for 1 1/2 hrs., 7.2W for 2 hrs.
Lead Calcium=27W for 1 1/2 hrs.; 24W for 2 hrs.
Lead Calcium = 10.8W for 1 1/2 hrs.
Lead Calcium = 27W for 1 1/2 hrs.; 24W for 2 hrs.
Factory Options
(For ordering with incandescent add option numbers in
order listed after series; e.g. UNH170200FW. For ordering
with fluorescent, replace “00” with option numbers in
order listed; e.g. PLX6230RP.)
70=Nickel Cadmium Batteries
20=DC Flasher
30=DC Flasher/Buzzer
90=DC Fire Alarm Interface (Incandescent Only)
SD=Self-Diagnostics (Add to end of catalog number:
e.g. EP130R1SD)
Energy Data
Accessories
(Order Separately)
FL1=Flasher Kit
BZ1=Buzzer Kit
Pendant Kit:
PK18BK=Black, 18” long
PK18WH=White, 18” long
Canopy Kit:
CAN571=White
CAN578=Black
Tamperproof Accessories:
TPK1CP=Tamperproof
Screws
0590A638SP=Screwdriver
bit for TPK1CP Screws
Wire Guard
WG10=Surface Wire Guard
WGS11=Ceiling, End Wire
Guard
VS2=Polycarbonate
Vandal Shield
VS2WP=Polycarbonate
Vandal Shield Weatherproof
Charged Mode (Fully Discharged Battery) Lead Calcium Battery
Input Power:
Input Current (Max.): Power Factor:
T.H.D.:
120V
277V
120V
277V
120V
277V
120V
277V
Incandescent Exits 20W Lamps
53W
51W
.45A
.19A
>.99
>.98
<9%
<10%
Incandescent Exits 5W lamps
33W
33W
.44A
.18A
>.62
>.65
<10% <8%
Standby Mode (Fully Charged Battery) Sealed Nickel Cadmium Battery Input Power consumption is reduced by approximately 7.5 Watts
in the standby operating mode
Sealed Lead Calcium Battery
Incandescent Exits 20W Lamps
47W
44W
.40A
.16A
>.98
>.98
<8%
<8%
Incandescent Exits 5W lamps
26W
26W
.41A
.16A
>.52
>.57
<11% <10%
DESCRIPTION
DIMENSIONS
6 7/8"
(175mm)
The Sure-Lites Self-powered
Standard Steel Exit Series is the
ideal exit for general purpose
applications. With an extensive
range of field installed accessories,
choice of faces and a variety of
mounting configurations, the basic
exit can be tailored to fit almost any
application. This exit features
durable steel construction,
attractive styling and high
efficiency illumination.
4 5/8"
(117mm)
2 1/4" (57mm)
1 1/4" (32mm)
EXIT SIGN Commercial
COOPER LIGHTING - SURE-LITES®
12 1/4"
(311mm)
7 1/2"
(191mm)
UN/UNH/PLX
SERIES
12 1/4" (311mm)
STEEL EXITS – SELF-POWERED INCANDESCENT
Type
Mounting
(1)
Universal
Universal Open Face (2)
Stencil Face, White Finish
Red Letters
Green Letters
Wall/Ceiling/End UN1SRW
UN1SGW
Wall/Ceiling/End UN1OFW (specify lens)
Stencil Face, Black Finish
Red Letters
Green Letters
UN1SRB
UN1SGB
UN1OFB (specify lens)
Stencil Face, Black/Silver Finish
Red Letters
Green Letters
UN1SRBS
UN1SGBS
UN1OFBS (specify lens)
STEEL EXITS – SELF-POWERED INCANDESCENT WITH ADDITIONAL OUTPUT TO POWER REMOTES
Universal (1)
Wall/Ceiling/End UNH1SRW
UNH1SGW
Universal Open Face (2) Wall/Ceiling/End UNH1OFW (specify lens)
UNH1SRB
UNH1SGB
UNH1OFB (specify lens)
Steel
Self-Powered
Incandescent,
Fluorescent, LED Lamping
UNH1SRBS
UNH1SGBS
UNH1OFBS (specify lens)
EXIT LIGHTING
STEEL EXITS – SELF-POWERED FLUORESCENT
Universal (1)
Wall/Ceiling/End PLX6200RP
PLX6200GP
Universal Open Face (2) Wall/Ceiling/End PLX6200OP (specify lens)
PLX6200RB
PLX6200GB
PLX6200OB (specify lens)
PLX6200RBS
PLX6200GBS
PLX6200OBS (specify lens)
STEEL EXITS – SELF POWERED FLUORESCENT WITH ADDITIONAL OUTPUT TO POWER REMOTES
Universal (1)
Wall/Ceiling/End
Universal Open Face (2) Wall/Ceiling/End
PLX7200RP
PLX7200GP
PLX7200OP (specify lens)
PLX7200RB
PLX7200GB
PLX7200OB (specify lens)
PLX7200RBS
PLX7200GBS
PLX7200OBS (specify lens)
STEEL EXITS – SELF-POWERED LED
Type
Mounting
Universal (1)
Wall/Ceiling/End
Stencil Face, White
Finish, Red Letters
UN1SRWLED
Stencil Face, White
Finish, Green Letters
UN1SGWLED
Stencil Face, Black
Finish, Red Letters
UN1SRWBLED
Stencil Face, Black
Finish, Green Letters
UN1SGWBLED
STEEL EXITS – SELF POWERED LED WITH ADDITIONAL OUTPUT TO POWER REMOTES
Universal (1)
Wall/Ceiling/End
UNH1SRWLED
UNH1SGWBLED
UNH1SRWBLED
UNH1SGWBLEDL
W AT TA G E R AT I N G S
UN
UNH
PLX-6200
PLX-7200
Lead Calcium=10.8W for 1 1/2 hrs., 7.2W for 2 hrs.
Lead Calcium=27W for 1 1/2 hrs.; 24W for 2 hrs.
Lead Calcium = 10.8W for 1 1/2 hrs.
Lead Calcium = 27W for 1 1/2 hrs.; 24W for 2 hrs.
Nickel Cadmium=15W for 1 1/2 hrs; 12W for 2 hrs.
Nickel Cadmium=24W for 1 1/2 hrs.; 18W for 2 hrs.
Nickel Cadmium = 15W for 1 1/2 hrs.; 12W for 2 hrs.
Nickel Cadmium = 24W for 1 1/2 hrs.; 18W for 2 hrs.
SAMPLE NUMBER: UNH170SRWSD
Factory Options
(For ordering with incandescent, add option numbers in
order listed after series; e.g. UNH170200FW. For ordering
with fluorescent, replace “00” with option numbers in
order listed; e.g. PLX6230RP. For ordering with LED, add
option numbers in order listed after series;
e.g.UN1702090SRWLED)
70=Nickel Cadmium Batteries
20=DC Flasher
30=DC Flasher/Buzzer
90=DC Fire Alarm Interface (Incandescent and LED Only)
SD=Self-Diagnostics (Add to end of catalog number:
e.g. UN130SRWSD)
• 20 gauge (white/black) steel
housing
• AC incandescent: two 20W
T6 1/2 intermediate base
lamps-DC: two 6V, 3.6W DC
Lamps
• AC fluorescent: two 5W
F5TT lamps-DC: three 6V,
3.6W DC lamps
• AC LED: long life LED lamp
modules-DC: two 6V, 3.6W
DC lamps
• Lead Calcium or Premium
Nickel Cadmium battery
O R D E R I N G I N F O R M AT I O N
Model
Number
See chart
• Dual-voltage input
120/277VAC, 60Hz
• Universal: both single and
double face; ceiling, wall
and end mountable
Accessories
(Order Separately)
FL1=Flasher Kit
BZ1=Buzzer Kit
Pendant Kit:
PK18BK=Black, 18” long
PK18WH=White, 18” long
Canopy Kit:
CAN571=White
CAN578=Black
Tamperproof Accessories:
TPK1CP=Tamperproof
Screws
0590A638SP=Screwdriver
bit for TPK1CP Screws
Wire Guard
WG10=Surface Wire Guard
WGS11=Ceiling, End Wire
Guard
VS2=Polycarbonate
Vandal Shield
VS2WP=Polycarbonate
Vandal Shield Weatherproof
Energy Data
Charged Mode (Fully Discharged Battery) Sealed Lead Calcium Battery
Input Power:
Input Current (Max.): Power Factor:
T.H.D.:
120V
277V
120V
277V
120V
277V
120V
277V
Incandescent Exits 20W Lamps
53W
51W
.45A
.19A
>.99
>.98
<9%
<10%
Fluorescent Exits 5W lamps
33W
33W
.44A
.18A
>.62
>.65
<10% <8%
Standby Mode (Fully Charged Battery) Sealed Nickel Cadmium Battery Input Power consumption is reduced by approximately 7.5 Watts
in the standby operating mode
Sealed Lead Calcium Battery
Incandescent Exits 20W Lamps
47W
44W
.40A
.16A
>.98
>.98
<8%
<8%
Fluorescent Exits 5W lamps
26W
26W
.41A
.16A
>.52
>.57
<11% <10%
Charged Mode (Fully Discharged Battery) Sealed Lead Calcium Battery
LED Exits Red Letters (UN)
10.4W
10.8W
.10A
.04A
>.89
>.88
<45% <48%
LED Exits Red Letters (UNH)
12.6W
13.2W
.10A
.05A
>.91
>.91
<39% <42%
LED Exits Green Letters (UN)
11.9W
12.3W
.10A
.05A
>.96
>.94
<29% <33%
LED Exits Green Letters (UNH)
15.8W
15.4W
.14A
.06A
>.97
>.96
<25% <29%
Standby Mode (Fully Charged Battery) Sealed Lead Calcium Battery Input Power consumption is reduced by approximately 7.5 Watts
in the standby operating mode
Sealed Nickel Cadmium Battery
LED Exits Red Letters (UN)
4.8W
4.7W
.05A
.02A
>.76
>.73
<63% <68%
LED Exits Red Letters (UNH)
9.1W
9.1W
.08A
.04A
>.90
>.89
<36% <40%
LED Exits Green Letters (UN)
6.1W
6.0W
.06A
.03A
>.88
>.85
<47% <52%
LED Exits Green Letters (UNH)
10.3W
10.3W
.09A
.04A
>.96
>.95
<24% <29%
Universal Face Exits include two stencil faces, canopy and backplate. (2) For Open Face Exits, specify lens desired: 004346SP-red letters, white background;
004347SP - green letters, white background; 004340SP - white letters, red background; 004341SP-white letters, green background; Special wording, consult your
Cooper Lighting Representative. Order Separately.
• Knockouts for chevron
directional indicators
• Universal styles offer
complete installation
flexibility with canopy,
backplate, and 2 stencil
faces
• Louvered downlight
• Suitable for floor proximity
installation
• Line-latching, Solid-State
voltage limited charger,
Solid-State switching, lowvoltage disconnect,
brownout circuit,
overload/short-circuit
protection, test
switch/power indicator light
• UL 924 Listed, Life Safety
NFPA 101, NEC/OSHA, most
state and local codes
(1)
COOPER LIGHTING
653
DIMENSIONS
DESCRIPTION
The XR Series is an efficient, rugged,
commercial grade emergency light.
The XR Series, in 6V and 12V models,
has the extra capacity to power remote
heads for added application flexibility.
1 7/8" (48mm)
13 1/4"
(337mm)
7 7/8"
(200mm)
9 3/4" (248mm)
2 1/2"
(64mm)
5" max.
(127mm)
XR SERIES
12 1/4" (311mm)
6 1/8"
(156mm)
1 1/4"
(32mm)
EMERGENCY LIGHTS Commercial
COOPER LIGHTING - SURE-LITES®
Steel
E L E C T R I C A L R AT I N G S
EMERGENCY LIGHT
Rated Wattage to 87 1/2% of rated D.C. Voltage
Model
XR3
XR3347(2)
XR5
XR7
XR9
XR11
XR11347(2)
XR12206347(2)
XR12208347(2)
XR12206
XR12208
XR15
XR16
XR17
XR20
XR21
Lamp Information
Battery
DC Voltage
1 1/2 hours
2 hours
3 hours
4 hours
SLC
SLC
SLC
SLC
SLC
SLC
SLC
SLC
SLC
SLC
SLC
SNC
SNC
SNC
SNC
SNC
6
6
6
6
6
6
6
12
12
12
12
6
6
6
12
12
27
27
27
36
54
54
54
36
54
36
54
15
24
50
30
50
24
24
24
30
48
48
48
30
48
30
48
12
18
36
24
36
18
–
18
20
36
36
–
–
–
20
36
8
14
28
18
28
14
–
14
16
28
28
–
–
–
16
28
6
10
20
14
20
Type
Incandescent
Incandescent
Halogen Sealed Beam
Incandescent
Tungsten Halogen
Incandescent
Incandescent
Incandescent
Incandescent
Incandescent
Incandescent
Incandescent
Incandescent
Incandescent
Incandescent
Incandescent
Wattage
9
9
6
9
6
9
9
9
9
9
9
7.2
7.2
7.2
9
9
Number
29-84
29-84
29-37
29-84
29-12
29-84
29-84
29-86
29-86
29-86
29-86
29-88
29-88
29-88
29-86
29-86
• Dual-voltage input
120/277VAC, 60Hz
• 22 gauge die formed steel
housing
• White powder coat finish
• White, high impact,
thermoplastic
• (2) fully adjustable
thermoplastic heads - top
mounted (side mounting
optional)
SLC=Sealed Lead Calcium Battery
SNC=Sealed Nickel Cadmium Battery
• Knockout, conduit or cord
set
O R D E R I N G I N F O R M AT I O N
• Universal J-box mounting
pattern, keyhole slots
SAMPLE NUMBER: XR3TDM
• Remote capability
Model
Number
XR3
XR3347
XR5
XR7
XR9
XR11
XR11347
XR12206
XR12206347
XR12208
XR12208347
XR15
XR16
XR17
XR20
XR21
Options
(Add as suffix)
A=Ammeter
MH=Metal Heads
SD=Self-Diagnostics (XR3, XR5,
XR12206, XR12208, XR15,
XR16, XR20, XR21 Only)
TDM=Time Delay Monitor
V=Voltmeter
Alternate Lamps (1)
Other Finishes (1)
Other Options (1)
Accessories
(Order separately)
1BRWH =Mounting Brackets
(2-White Finish)
1MSWH=Mounting Shelf
(White Finish)
VK1 =Voltmeter
CSK120=Cord Set 120VAC
CSK277=Cord Set 277VAC
WG1=Wire Guard
VS2=Polycarbonate Vandal
Shield
VS2WP=Polycarbonate
Vandal Shield Weatherproof
• Line-latching, Solid-State
voltage limited charger,
Solid-State switching, lowvoltage disconnect,
brownout circuit,
overload/short-circuit
protection, test
switch/power indicator
light
• UL 924 Listed, CSA
Certified, Life Safety NFPA
101, NEC/OSHA, most
state and local codes
Energy Data
Model No.
XR3, XR5, XR7, XR9, XR11
XR12206, XR12208
XR15
XR16
XR17
XR20
XR21
Input Current (Max.):
120V
277V
.12A
.05A
.30A
.13A
.06A
.03A
.07A
.04A
.08A
.05A
.13A
.06A
.15A
.07A
Note: 0, 1, 3 & 4 Heads also available. Specify after catalog number (i.e., XR11484).
(1) Consult your Cooper Lighting Representative. (2) 347=120/347V
COOPER LIGHTING
621
""*,Ê/ ÊÊ-1,/-
DESCRIPTION
The XR Series is an efficient, rugged, commercial grade emergency light.
The XR Series, in 6V and 12V models, has the extra capacity to power
remote heads for added application flexibility.
Á
7\SH
&DWDORJ
3URMHFW
'DWH
&RPPHQWV
3UHSDUHGE\
SPECIFICATION FEATURES
Housing Construction
- 22-Gauge Die Formed Steel
- Knockout, Conduit or Cord Set
- Universal J-Box
Mounting Pattern
- Keyhole Mounting Slots
- White Finish
Electronic
- Dual Voltage Input
120/277 VAC, 60 Hz
- Line-latching
- Solid-state Voltage
Limited Charger
- Solid-state Switching
- Low-Voltage Disconnect
- Brownout Circuit
- Overload/Short Circuit
Protection
- Test Switch/Power
Indicator Light
£ÎÊ£É{¸
QÎÎÇR
Battery
- Sealed Lead Calcium,
Recombination
- Maintenance-free, Long-life
Code Compliance
- UL 924 Listed
- Life Safety NFPA 101
- CSA Certified
- NEC/OSHA
- Most State and Local Codes
Warranty
- Unit: 1-year
- Battery: 5-year pro-rata
Head/Lamp Data
- Two Heads Standard
- Top Mounted - Side mounting
Optional
- Glare-Free Lens
- Fully Adjustable
- Remote Capability
- High Impact - Thermoplastic
- Matches Housing Finish
£ÊÇÉn¸
Q{nR
ÇÊÇÉn¸
QÓääR
£Ê£É{ ¸
QÎÓR
ÊÎÉ{¸ÊQÓ{nR
ÈÊ£Én¸Ê
Q£xÈR
£ÓÊ£É{¸ÊQΣ£R
>ÌÌiÀÞ
-
-
-
-
-
-
-
8,£ÓÓäÈÎ{ÇÊÊ­Ó® -
8,£ÓÓänÎ{ÇÊÊ­Ó® -
8,£ÓÓäÈ
-
8,£ÓÓän
-
XR
SERIES
REMOTE CAPACITY
DOUBLE HEAD
METAL BODY
SEALED LEAD CALCIUM BATTERY
Emergency Lighting
ÓÊ£ÉÓ¸
QÈ{R
x¸Ê>Ý°
Q£ÓÇR
ELECTRICAL RATINGS
`i
8,Î
8,ÎÎ{ÇÊ­Ó®
8,x
8,Ç
8,
8,££
8,££Î{ÇÊ­Ó®
- Full Recharge Time,
24 hrs. (max.)
- Polarized Battery Terminals
,>Ìi` 7>ÌÌ>}i ÌÊnÇÊ£ÉÓ¯ÊvÊÀ>Ìi`Ê°
°Ê6Ì>}i
6Ì>}i £Ê£ÉÓÊ
ÕÀÃ ÓÊ
ÕÀÃ
ÎÊ
ÕÀÃ
{Ê
ÕÀÃ
È
ÓÇ
Ó{
£n
£{
q
q
È
ÓÇ
Ó{
È
ÓÇ
Ó{
£n
£{
È
ÎÈ
Îä
Óä
£È
È
x{
{n
ÎÈ
Ón
È
x{
{n
ÎÈ
Ón
q
q
È
x{
{n
q
q
£Ó
ÎÈ
Îä
q
q
£Ó
x{
{n
£Ó
ÎÈ
Îä
Óä
£È
£Ó
x{
{n
ÎÈ
Ón
>«ÊvÀ>Ì
/Þ«i
V>`iÃViÌ
V>`iÃViÌ
>}iÊ-i>i`Êi>
V>`iÃViÌ
/Õ}ÃÌiÊ>}i
V>`iÃViÌ
V>`iÃViÌ
V>`iÃViÌ
V>`iÃViÌ
V>`iÃViÌ
V>`iÃViÌ
7>ÌÌ>}iÊÊÊÊÊÊÊ
È
È
ÕLiÀ
Ón{
Ón{
ÓÎÇ
Ón{
Ó£Ó
Ón{
Ón{
ÓnÈ
ÓnÈ
ÓnÈ
ÓnÈ
-
r-i>i`Êi>`Ê
>VÕÊ>ÌÌiÀÞ
ORDERING INFORMATION
SAMPLE NUMBER: XR3TDM
Model Number
XR3
XR3347
XR5
XR7
XR9
XR11
XR11347
XR12206
XR12206347
XR12208
XR12208347
Options (add as suffix)
A=Ammeter
MH=Metal Heads
SD=Self-Diagnostics (XR3, XR5,
XR12206, XR12208, XR15,
XR16, XR20, XR21 Only)
TDM=Time Delay Monitor
V=Voltmeter
Alternate Lamps (1)
Other Finishes(1)
Other Options (1)
Accessories (order separately)
1BRWH =Mounting Brackets (2-White Finish)
1MSWH=Mounting Shelf (White Finish)
VK1 =Voltmeter
CSK120=Cord Set 120VAC
CSK277=Cord Set 277VAC
WG1=Wire Guard
VS2=Polycarbonate Vandal Shield
VS2WP=Polycarbonate Vandal Shield - Weatherproof
Note: 0, 1, 3 & 4 Heads also available. Specify after catalog number (i.e., XR11484)
(1) Consult your Cooper Lighting Representative. (2) 347=120/347V
Specifications and Dimensions subject to change without notice.
Consult your representative for additional options and finishes.
, 9 Ê / 8,Î]Ê8,x]Ê8,Ç]Ê8,]Ê8,££
«ÕÌÊ
ÕÀÀiÌÊ­>Ý°®\
£Óä6rÊ°£Ó
ÓÇÇ6rÊ°äx
8,£ÓÓäÈ]Ê8,£ÓÓän
«ÕÌÊ
ÕÀÀiÌÊ­>Ý°®\
£Óä6rÊ°Îä
ÓÇÇ6rÊ°£Î
ADX041005
03/08/2007 11:58:03 AM
XR SERIES
PHOTOMETRICS
ÀâÌ>ÊÃÌÀLÕÌ
6i À Ì V > Ê Ã Ì À L Õ Ì
£ä
/
/
£ä
/
/
£
ä
ä°x
ä°Î
ä°Ó
ä°£
*
8-
/
,/
£ä
ä
£ä
Óä
Îä
{ä
xä
Èä
£
ä
Çä
/Ê,"Ê*Ê­i>ÃÕÀi`ÊÊ>Ýî
>«Ê °ÊÓÎÇÊÀÊÓn{ÊÀÊÓnÈ
Ì>ÊÕiÃÊqÊÓÎÇÊJÊ£äÇ
Ón{ÊJÊ£ÎÓ
ÓnÈÊJÊ£În
/
,/
£ä
ä
£ä
Óä
ä°x
ä°Î
Îä
ä°Ó
{ä
ä°£
*
8-
xä
Èä
Çä
/Ê,"Ê*Ê­i>ÃÕÀi`ÊÊ>Ýî
>«Ê °ÊÓÎÇÊÀÊÓn{ÊÀÊÓnÈ
TECHNICAL DATA
i > `Ã
i > Ì V
i`
/
iÊ>«Ê
ÕÃ}ÊÃÊVÃÌÀÕVÌi`
vÊv>iÀiÃÃÌ>ÌÊ>`Ê«>VÌÊ
ÀiÃÃÌ>ÌÊiVÌÊ`i`Ê
Ì
iÀ«>ÃÌVÊÜÌ
Ê>ÌV
}Ê
vÃ
°Ê/
iÊÌ
ÀiiÊ`iÃ>Ê
ÃÜÛiÊ>ÃÃiLÞÊ«iÀÌÃÊ
>««ÀÝ>ÌiÊ>}Ê>`ÕÃÌiÌÊ
vÀÊnäÊc ÛiÀÌV>Ê>`ÊÎxnÊc
ÀÌ>Ì°Ê/
iÊ«>ViiÌÊÃÊ
ÃiVÕÀi`ÊÜÌ
Ê>ÊV>LiÊ«ÛÌÊ
ÕÌi`ÊÊ>ÊÀÌ>Ì}ÊL>ÃiÊÀ}°
-ÕÀiÌiÿÊi>ÌV
i`ÊiiVÌÀV
VÀVÕÌÀÞÊ>iÃÊÃÌ>>ÌÊi>ÃÞ
>`ÊiVV>°ÊÊ>LÀÊivvViÌ
>VÌÛ>Ìi`Ê>`ÊÃÜÌV
«ÀiÛiÌÃÊÌ
iÊ>«ÃÊvÀ
ÌÕÀ}ÊÊ`ÕÀ}ÊÃÌ>>Ì
ÌÊ>ÊiiÀ}âi`Ê
ÊVÀVÕÌ°
i>ÌV
}Êi>ÌiÃÊÌ
iÊii`
vÀÊ>ÊVÌÀ>VÌÀ¿ÃÊÀiÌÕÀÊÌÊ>
LÊÃÌiÊÌÊViVÌÊÌ
iÊL>ÌÌiÀiÃ
Ü
iÊÌ
iÊLÕ`}¿ÃÊ>Ê«ÜiÀ
ÃÊ«iÀ>iÌÞÊÌÕÀi`Ê°
> «Ã
iÃ}i`ÊëiVvV>ÞÊvÀ
iiÀ}iVÞÊ}
Ì}Ê>««V>ÌÃ]
Ì
iÊ*,ÊÎÈÊÃi>i`ÊLi>ÊÌÞ«i
`iÃ}ÊÃÕÀiÃÊ«ÌÕÊ}>Ài
vÀiiÊ}
ÌÊ`ÃÌÀLÕÌÊ>}
ÜÌ
Ê
ÀâÌ>Ê>`ÊÛiÀÌV>
>`ÕÃÌiÌÊLÞÊÀÌ>Ì}ÊÌ
iÊiÃ
ÜÌ
ÊÌ
iÊ
ÕÃ}°Ê/Õ}ÃÌi
>}iÊ>«ÃÊ­8,x]Ê8,®
>ÝâiÊ}
ÌÊÕÌ«ÕÌÊÜÌ
ÜiÀÊÜ>ÌÌ>}i°
ÕÃ}
/
iÊÀÕ}}i`ÊÓÓ}>Õ}iÊ`i
vÀi`ÊV`ÊÀi`ÊÃÌiiÊ
ÕÃ}
ÃÊvÃ
i`ÊÜÌ
ÊÜ
ÌiÊVÀÀÃ
ÀiÃÃÌ>ÌÊ«ÞiÃÌiÀÊ«Ü`iÀÊV>Ì
«>Ì°Ê
>LiÌÊ
>ÃÊiÞ
i
ÕÌ}ÊÃÌÃÊ>`ÊVÕÌÃ
ÊÌ«]ÊÀi>ÀÊ>`ÊÃ`iÊvÀÊ
É
ÜÀ}ÊViVÌÃÊ>`Ê
>Ã
ÕÛiÀÃ>ÊÕÌ}Ê«>ÌÌiÀ°
" Û i À > ` Ê > ` Ê -
À Ì
À V Õ Ì Ê * À Ì i V Ì
/
iÊÃ`ÃÌ>ÌiÊÛiÀ>`Ê
ÌÀ}Ê`iÛViÊÊÌ
iÊ
Ê
VÀVÕÌÊ`ÃViVÌÃÊÌ
iÊ>«Ê
>`ÊvÀÊÌ
iÊL>ÌÌiÀÞÊÃ
Õ`Ê
iÝViÃÃÛiÊÜ>ÌÌ>}iÊ`i>`ÃÊLiÊ
>`iÊ>`Ê>ÕÌ>ÌV>ÞÊÀiÃiÌÃÊ
Ü
iÊÌ
iÊÛiÀ>`ÊÀÊÃ
ÀÌÊ
VÀVÕÌÊÃÊÀiÛi`°Ê/
ÃÊ
ÛiÀ>`ÊVÕÀÀiÌÊ«ÀÌiVÌÛiÊ
vi>ÌÕÀiÊi>ÌiÃÊÌ
iÊii`ÊvÀÊ
vÕÃiÃÊÀÊVÀVÕÌÊLÀi>iÀÃÊvÀÊÌ
iÊ
Ê>`°Ê
-`-Ì>ÌiÊ
>À}iÀ
-Õ««i`ÊÜÌ
Ê>Ê£ÓäÉÓÇÇÊ6
]
ÛÌ>}iÊÀi}Õ>Ìi`ÊÃ`ÃÌ>ÌiÊ
V
>À}iÀ°Êi`>ÌiÞÊÕ«Ê
ÀiÃÌÀ>ÌÊvÊ
ÊVÕÀÀiÌÊ>vÌiÀ
>Ê«ÜiÀÊv>ÕÀi]ÊÌ
iÊV
>À}iÀÊ
«ÀÛ`iÃÊ>Ê
}
ÊV
>À}iÊÀ>Ìi°Ê
/
iÊV
>À}iÊVÀVÕÌÊÀi>VÌÃÊÌÊÌ
iÊ
V`ÌÊvÊÌ
iÊL>ÌÌiÀÞÊ>`Ê
>ÌiÀÃÊÌ
iÊÀ>ÌiÊvÊV
>À}iÊÊ
À`iÀÊÌÊ>Ì>Ê«i>ÊL>ÌÌiÀÞÊ
V>«>VÌÞÊ>`Ê>ÝâiÊL>ÌÌiÀÞÊ
vi°Ê-`ÃÌ>ÌiÊVÃÌÀÕVÌÊ
ÀiV
>À}iÃÊÌ
iÊL>ÌÌiÀÞÊvÜ}Ê
>Ê«ÜiÀÊv>ÕÀiÊÊ>VVÀ`>ViÊ
ÜÌ
Ê1ÊÓ{°Ê
ÀÜÕÌÊ
ÀVÕÌ
/
iÊLÀÜÕÌÊVÀVÕÌÊÊ-ÕÀiÊ
ÌiÿÊÕÌÃÊÌÀÃÊÌ
iÊvÜ
vÊ
ÊVÕÀÀiÌÊÌÊÌ
iÊÕÌ
>`Ê>VÌÛ>ÌiÃÊÌ
iÊiiÀ}iVÞÊ
}
Ì}ÊÃÞÃÌiÊÜ
iÊ>Ê
«Ài`iÌiÀi`ÊÀi`ÕVÌÊv
Ê«ÜiÀÊVVÕÀðÊ/
ÃÊ`«
ÊÛÌ>}iÊÜÊV>ÕÃiÊÃÌÊ
L>>ÃÌi`ÊvÝÌÕÀiÃÊÌÊiÝÌ}ÕÃ
Ê
V>ÕÃ}ÊÃÃÊvÊÀ>Ê}
Ì}Ê
iÛiÊÌ
Õ}
Ê>ÊÌÌ>Ê«ÜiÀÊ
v>ÕÀiÊ
>ÃÊÌÊVVÕÀÀi`°Ê
- ` - Ì > Ì i Ê/À > Ã v iÀ
/
iÊÕÌÊVÀ«À>ÌiÃÊ>ÊÃ`Ê
ÃÌ>ÌiÊÃÜÌV
}ÊÌÀ>ÃÃÌÀÊÜ
V
Ê
i>ÌiÃÊVÀÀ`i`Ê>`Ê«ÌÌi`Ê
VÌ>VÌÃÊÀÊiV
>V>Êv>ÕÀiÃÊ
>ÃÃV>Ìi`ÊÜÌ
ÊÀi>ÞðÊ/
iÊ
ÃÜÌV
}ÊVÀVÕÌÊÃÊ`iÃ}i`ÊÌÊ
`iÌiVÌÊ>ÊÃÃÊvÊ
ÊÛÌ>}iÊ>`Ê
>ÕÌ>ÌV>ÞÊiiÀ}âiÃÊÌ
iÊ
>«Ã°Ê1«ÊÀiÃÌÀ>ÌÊvÊÌ
iÊ
Ê«ÜiÀ]ÊÌ
iÊiiÀ}iVÞÊ
>«ÃÊÜÊÃÜÌV
ÊvvÊ>`ÊÌ
iÊ
V
>À}iÀÊÜÊ>ÕÌ>ÌV>ÞÊ
ÀiV
>À}iÊÌ
iÊL>ÌÌiÀÞ°
Ü 6
Ê Ì>}iÊÃViV Ì
7
iÊÌ
iÊL>ÌÌiÀÞ¿ÃÊÌiÀ>Ê
ÛÌ>}iÊv>ÃÊLiÜÊnä¯ÊvÊÌ
iÊ
À>Ìi`ÊÛÌ>}i]ÊÌ
iÊÜÛÌ>}iÊ
VÀVÕÌÀÞÊ`ÃViVÌÃÊÌ
iÊ
}
Ì}Ê>`°Ê/
iÊ`ÃViVÌÊ
Ài>ÃÊÊivviVÌÊÕÌÊÀ>Ê
ÕÌÌÞÊ«ÜiÀÊÃÊÀiÃÌÀi`]Ê
«ÀiÛiÌ}Ê`ii«ÊL>ÌÌiÀÞÊ
`ÃV
>À}i°
/i Ã Ì Ê - Ü Ì V
É * Ü i À Ê ` V > Ì À
}
Ì
ÛiiÌÞÊV>Ìi`Ê
VL>Ì /iÃÌÊ-ÜÌV
É*ÜiÀÊ
`V>ÌÀÊ}
ÌÊ>ÜÃÊvÀÊ
>Õ>ÊÛiÀvV>ÌÊvÊ«À«iÀÊ
«iÀ>ÌÊvÊÌ
iÊÌÀ>ÃviÀÊVÀVÕÌÊ
>`ÊiiÀ}iVÞÊ>«Ã°Ê
- i > i ` Ê i > ` Ê > V Õ Ê > Ì Ì i ÀÞ
/
iÊvÕÞÊÃi>i`]Ê}vi]
>Ìi>VivÀiiÊi>`ÊV>VÕÊ
L>ÌÌiÀÞÊÃÊ`i>ÊvÀÊiiÀ}iVÞÊ
}
Ì}Ê>««V>ÌðÊ/
iÃiÊ
ÀiVL>ÌÊVÞViÊL>ÌÌiÀiÃÊ
ÌÞ«V>ÞÊ«ÀÛ`iÊi}
ÌÊÌÊÌiÊ
Þi>ÀÃÊvÊviÊ>`Ê>ÞÊLiÊ
«iÀ>Ìi`ÊÊ>ÞÊ«ÃÌ°Ê
7>ÀÀ>ÌÞ
Ê-ÕÀiÌiÿÊÕÌÃÊ>ÀiÊL>Vi`Ê
LÞÊ>ÊvÀÊiÞi>ÀÊÜ>ÀÀ>ÌÞÊ
>}>ÃÌÊ`iviVÌÊÊ>ÌiÀ>
>`ÊÜÀ>Ã
«Ê­iÝVÕ`}Ê
>«Ã®°Ê>Ìi>VivÀii]
}vi]ÊÃi>i`Êi>`ÊV>VÕÊ
L>ÌÌiÀiÃÊV>ÀÀÞÊ>ÊvÛiÞi>À
«ÀÀ>Ì>ÊÜ>ÀÀ>ÌÞ°
Specifications and Dimensions subject to change without notice.
Sure-Lites • Customer First Center • 1121 Highway 74 South • Peachtree City, GA 30269 • TEL 770.486.4800 • FAX 770.486.4801
ADX041005
03/08/2007 11:58:03 AM
EMERGENCY LIGHTING Commercial/Industrial
COOPER LIGHTING - SURE-LITES®
DIMENSIONS
DESCRIPTION
The XR Series is an efficient,
rugged, commercial grade
product designed for the
demands of emergency lighting
applications. The XR Series, in
6V and 12V models has the extra
capacity to power remote heads
for added application flexibility.
1 7/8" (48mm)
13 1/4"
(337mm)
7 7/8"
(200mm)
9 3/4" (248mm)
2 1/2"
(64mm)
5"
(127mm)
XR SERIES
Remote Capacity
Double Head
Metal Body
Emergency Light
EMERGENCY LIGHTING
• Dual-voltage input
120/277VAC, 60Hz
• Line-latching, Solid-State
voltage limited charger,
Solid-State switching, lowvoltage disconnect,
brownout circuit,
overload/short-circuit
protection, test
switch/power indicator
light
12 1/4" (311mm)
1 1/4"
(32mm)
ELECTRICAL RATINGS
Model
XR3
XR3347(2)
XR5
XR7
XR9
XR11
XR11347(2)
XR12206347(2)
XR12208347(2)
XR12206
XR12208
XR15
XR16
XR17
XR20
XR21
Battery
SLC
SLC
SLC
SLC
SLC
SLC
SLC
SLC
SLC
SLC
SLC
SNC
SNC
SNC
SNC
SNC
Rated Wattage to 87 1/2% of rated D.C. Voltage
DC Voltage 1 1/2 hours 2 hours
3 hours
4 hours
6
27
24
18
14
6
27
24
–
–
6
27
24
18
14
6
36
30
20
16
6
54
48
36
28
6
54
48
36
28
6
54
48
–
–
12
36
30
–
–
12
54
48
–
–
12
36
30
20
16
12
54
48
36
28
6
15
12
8
6
6
24
18
14
10
6
50
36
28
20
12
30
24
18
14
12
50
36
28
20
SLC=Sealed Lead Calcium Battery
SNC=Sealed Nickel Cadmium Battery
O R D E R I N G I N F O R M AT I O N
SAMPLE NUMBER: XR3TDM
• 22 gauge die formed steel
• White finish
Model
Number
XR3
XR3347
XR5
XR7
XR9
XR11
XR11347
XR12206
XR12206347
XR12208
XR12208347
XR15
XR16
XR17
XR20
XR21
• Knockout, conduit or cord
set
• Universal J-box mounting
pattern, keyhole slots
• Two fully adjustable heads
- top mounted (side
mounting optional), glare
free lens
• Remote capability
• UL 924 Listed, CSA
Certified, Life Safety NFPA
101, NEC/OSHA, most
state and local codes
Options
(Add as suffix)
A=Ammeter
MH=Metal Heads
SD=Self-Diagnostics (XR3, XR5,
XR12206, XR12208, XR15,
XR16, XR20, XR21 Only)
TDM=Time Delay Monitor
V=Voltmeter
Alternate Lamps (1)
Other Finishes (1)
Other Options (1)
Accessories
(Order separately)
1BRWH =Mounting Brackets
(2-White Finish)
1MSWH=Mounting Shelf
(White Finish)
VK1 =Voltmeter
CSK120=Cord Set 120VAC
CSK277=Cord Set 277VAC
WG1=Wire Guard
VS2=Polycarbonate Vandal
Shield
VS2WP=Polycarbonate
Vandal Shield Weatherproof
Energy Data
Model No.
XR3, XR5, XR7, XR9, XR11
XR12206, XR12208
XR15
XR16
XR17
XR20
XR21
Input Current (Max.):
120V
277V
.12A
.05A
.30A
.13A
.06A
.03A
.07A
.04A
.08A
.05A
.13A
.06A
.15A
.07A
Note: 0, 1, 3 & 4 Heads also available. Specify after catalog number (i.e., XR11484)
472
COOPER LIGHTING
6 1/8"
(156mm)
(1)
Consult your Cooper Lighting Representative.
(2)
347=120/347V
Lamp Information
Type
Incandescent
Incandescent
Halogen Sealed Beam
Incandescent
Tungsten Halogen
Incandescent
Incandescent
Incandescent
Incandescent
Incandescent
Incandescent
Incandescent
Incandescent
Incandescent
Incandescent
Incandescent
Wattage
9
9
6
9
6
9
9
9
9
9
9
7.2
7.2
7.2
9
9
Number
29-84
29-84
29-37
29-84
29-12
29-84
29-84
29-86
29-86
29-86
29-86
29-88
29-88
29-88
29-86
29-86
TYPE:
C AT A L O G # :
S P E C I F I C AT I O N F E AT U R E S
The FLM1000 flood fixture is
perfect for lighting sport
facilities, yards and industrial
areas.
- The diffuser is totally sealed
with the housing by silicon
rubber gasket and 5
aluminum clips to ensure
high ingress protection
against dust and water
(IP65).
- The box has a symmetrical
arrangement of air-cooling
fins to accelerate ballast
heat dissipation.
- The quick-release clips
make the access to lamp
quick and easy.
Painting
S P E C I F I C AT I O N F E AT U R E S
Housing
- Sturdy, high pressure die
cast aluminum housing
ensures excellent shocks
and corrosion resistance.
- The size and rear ribs of the
housing accelerate lamp
heat dissipation.
Reflector
- Hammered dimpled
anodized aluminum
reflector for wide diffused
light beam.
Diffuser
- 4mm thickness, tempered
flat glass diffuser
withstands high
temperature generated by
lamp.
- The two lower clips allow
diffuser hinging with
housing for easy
maintenance.
Gear Compartment
- Rugged, high pressure die
cast aluminum box fixed
down the housing.
- The box consists of two
pieces totally enclosed by
silicon rubber gasket and
fastening screws to ensure
high ingress protection
(IP65) inside the
compartment
- Cable entry via (PG16) cable
gland.
- High grade black polyester
powder painting (80
microns thickness).
FLM1000
FLOODLIGHT
- The painting assures no
change in color under the
severe environmental
conditions.
Installation and Aiming
1 0 0 0 W
Metal Halide
- The luminaire has a steel
mounting bracket allows
different adjustment
possibilities for vertical
aiming.
FLOODLIGHT
- The box accommodates the
gear tray made of
galvanized steel on which
electrical components are
mounted.
DIMENSIONS
675mm
540mm
595mm
175mm
T E C H N I C A L D AT A
IP65
COOPER LIGHTING
AIS051515
COOPER LIGHTING — LUMARK
®
DESCRIPTION
F L M 1 0 0 0 FLOODLIGHT
COOPER LIGHTING — LUMARK
®
PHOTOMETRICS
LIGHTING DATA
O R D E R I N G I N F O R M AT I O N
Catalog
Number
PRM-MHFLM-Y-1000F-220V/50Hz
Lamp
Type
Metal Halide
Lamp
Wattage
1000W
Ballast Type/
Power Factor
Reactor/HPF
Voltage
220V /50Hz
Base
E40
Net Wt.
Shipping Volume
69.5 x 60.5 x 20.0cm
Shipping
Net Weight(lbs.)
23.0kg
PRM-MHFLM-Y-1000F-XXX
N/A
1000W
N/A
N/A
E40
69.5 x 60.5 x 20.0cm
14.5kg
C O N T A I N E R L O A D I N G I N F O R M AT I O N
Fixture
PRM-MHFLM-Y-1000F-220V/50Hz
20’
825
40’
684
40’HC
748
PRM-MHFLM-Y-1000F-XXX
825
684
748
NOTE: Specifications and dimensions subject to change without notice.
Visit our web site at www.cooperlighting.com
Customer First Center 1121 Highway 74 South Peachtree City, GA 30269 770.486.4800 FAX 770.486.4801
AIS051515
TYPE:
C AT A L O G # :
S P E C I F I C AT I O N F E AT U R E S
The FLM2000 flood fixture is
perfect for lighting sport
facilities, and industrial
areas.
- Specular anodized
aluminum reflector for
narrow beam.
cover fixed on the other
luminaire side.
- In case of twin lamps
(2x400W) two blocks are
used on both luminaire
sides. The lamps are
replaced quickly and easily
without opening the
diffuser by removing these
blocks. For cable entry the
lamp holder block is
equipped with (PG16) cable
gland.
Diffuser
- 4mm thickness, tempered
flat glass diffuser
withstands high
temperature generated by
lamp.
S P E C I F I C AT I O N F E AT U R E S
Housing
- The diffuser is totally sealed
with the housing by silicon
rubber gasket and 4
fastening screws to ensure
high ingress protection
against dust and water jet
(IP55) sealing the lamp
compartment. The seal is
secured by two extruded
aluminum clips.
- Sturdy, high pressure die
cast aluminum housing
ensures excellent shock and
corrosion resistance.
- The design and size of the
housing accelerate lamp
heat dissipation.
Gear
- Prewired lamp gear
( ballast, ignitor,capacitor
and 3 pole terminal block) is
available in an individual
galvanized gear tray.
Painting
- High grade black polyester
powder painting (80
microns thickness).
- The lamp holder is located
in an individual high
pressure die cast
Aluminium block.
FLOODLIGHT
Installation and Aiming
The luminaire is equipped
with a galvanized stee
mounting bracket with one
side protractor scale for
vertical aiming.
- In a single lamp unit
(1000/2000W), one block is
used on the luminaire. The
lamp is replaced quickly
and easily without opening
the diffuser via high
pressure die cast
Aluminium maintenance
- Hammered dimpled
anodized aluminum
reflector for wide diffused
light beam.
2 0 0 0 W
Metal Halide
- The painting assures no
change in color under the
severe environmental
conditions.
Lamp Holder Block
Reflector
FLM2000
FLOODLIGHT
- The horizontal aiming can
be done by rotating the
luminaire about the fixation
mid-bolt of the bracket .
DIMENSIONS
690
680
630
790
525
295
Tilt Adjustment
85
°
°
90
T E C H N I C A L D AT A
IP55
COOPER LIGHTING
AIS051517
COOPER LIGHTING — LUMARK
®
DESCRIPTION
F L M 2 0 0 0 FLOODLIGHT
COOPER LIGHTING — LUMARK
®
PHOTOMETRICS
LIGHTING DATA
cd/1000 lm
750
DK2000 MT2000W wide beam cd/1000 lm DK2000 MT2000W narrow beam
1500
600
1200
450
900
300
600
150
300
60˚
40˚
20˚
0˚
20˚
40˚
60˚
60˚
40˚
20˚
0˚
20˚
40˚
60˚
O R D E R I N G I N F O R M AT I O N
Catalog
Number
PRM-MHFLM-Y-2000F-XXX
Lamp
Type
N/A
Lamp
Wattage
2000W
Ballast Type/
Power Factor
N/A
Voltage
N/A
Base
E40
Net Wt.
Shipping Volume
84 x 79 x 33cm
Shipping
Net Weight
21kg
C O N T A I N E R L O A D I N G I N F O R M AT I O N
Size
PRM-MHFLM-Y-2000F-XXX
20’
126
40’
252
40’HC
308
NOTE: Specifications and dimensions subject to change without notice.
Visit our web site at www.cooperlighting.com
Customer First Center 1121 Highway 74 South Peachtree City, GA 30269 770.486.4800 FAX 770.486.4801 AIS051517
FLOODLIGHTING
COOPER LIGHTING - LUMARK®
DESCRIPTION
DIMENSIONS
The Lumark Nighthawk III
utilizes a soft-cornered
aerodynamic design to
provide excellent EPA ratings
and an aesthetically pleasing
appearance. Dark bronze
polyester powder coat finish
assures corrosion resistance
and long-lasting aesthetics.
U.L. listed and CSA certified
for wet locations.
27 1/2"
(699mm)
18 1/2"
(470mm)
20 1/2" (521mm)
150-400W HPS & MH,
1000W HPS
9 1/2" (241mm)
NK
NIGHTHAWK III
1000W
Lamp
Placement
1000W HPS
10 1/2" (267mm)
1 5 0 - 1 0 0 0 W
High Pressure Sodium
Pulse Start Metal Halide
Metal Halide
20 1/2" (521mm)
E PA - E f f e c t i v e P r o j e c t e d A r e a : 2 . 7
SLIPFITTER FLOODLIGHT
O R D E R I N G I N F O R M AT I O N
• Die-formed heavy-duty
housing is made of
cold-rolled steel and
finished in highly
reflective white polyester
powder coat. Stamped
steel ballast mounting
bracket is integral part
of housing
• Formed aluminum flush
draw-action latches offer
easy access to lamp
compartment without
tools and maintain
integrity of seal when
closed
• Die-cast aluminum with
integral cast hinges for
removal without tools
• Heat- and impact-resistant tempered glass. Lens
is mounted flush with door
surface to reduce wind
drag and prevent dirt
or moisture from
accumulating
• Door gasket is foam-inplace silicone, providing
maximum protection of
interior components from
the elements
S A M P L E N U M B E R : H P N K - S 7 6 - 4 0 0 - M T- Q
Lamp Type
Series
HP=High
NK=Nighthawk III
Pressure
Sodium
MH=Metal
Halide
MP=Pulse
Start MH
(CWA) 1
Mounting
Type 2
S=Slipfitter
Beam Spread
76=7Hx6V
Lamp Wattage
150=150W
175=175W
200=200W 3
250=250W
320=320W 3
350=350W 3
400=400W
600=600W
750=750W 4
1000=1000W
Voltage 5
Options &
120V
Accessories
208V
(See Below)
240V
277V
347V
480V
MT=Multi-Tap 6
TT=Triple-Tap 6
For Pole Information Refer to Cooper Lighting Pole Section.
Options (add as suffix) 7
Q=Quartz Restrike DC Bayonet Base (Hot Strike Only)
EM=Quartz Restrike Cold Start Time Delay Relay
(Not available in 1000W)
F1=Single Fuse (120, 277 or 347V)
F2=Double Fused (208, 240 or 480V)
LL=Lamp Included 8
PER=NEMA Twistlock Photocontrol Receptacle
T=Removable Quick-Disconnect Power Tray
(Cannot be used with 1000W units)
Accessories (order separately)
TV/NK-XX=Top or Bottom Visor (Specify Color)
SV1/NK-XX=Single Side Visor (Specify Color)
SV/NK-XX=Double Side Visor (Specify Color)
WG/NK-XX=Wire Guard (Specify Color)
OA/RA1013=Shorting Cap for NEMA Twistlock Photocontrol
Receptacle
OA/RA1016=Photoelectric Control, 105-285-Volt NEMA Type
OA/RA1027=Photoelectric Control, 480 Volt NEMA Type
OA/RA1028=Field Installed NEMA Twistlock Photocontrol Receptacle
(Order Photocontrol Separately)
OA/RA1201=Photoelectric Control, 347 Volt NEMA Type
VS/NK=Vandal Shield
VS/NK/1000=Vandal Shield for 1000W Units
• Die-cast aluminum
integral slipfitter mounts
on nominal 2 3/8" or 3"
O.D. tenons. A degreemarked quadrant is cast
in for easy and accurate
aiming
• Approximate net weight:
55 lbs. (25 kgs.)
386
COOPER LIGHTING
NOTES: 1 200, 250, 320, 350, 400, & 750W. 2 Trunnion and Yoke mounts also available. 3 Pulse Start Metal Halide only. 4 HPS & MP only. 5 Products also available in
non-US voltages and 50Hz for international markets. Consult factory for availability and ordering information. 6 Multi-Tap ballast is 120/208/240/277V wired
277V. Triple-Tap ballast is 120/277/347V wired 347V. Add desired voltage to end of catalog number. 7 Must be listed in the order shown and seperated by a
dash. 8 Lamp is shipped separate from luminaire. Lamp is Cooper designated product based on luminaire requirements. Specified lamps must be ordered as a
separate line item.
DIMENSIONS
DESCRIPTION
22 1/2"
(572mm)
The Lumark Nighthawk III utilizes
a soft-cornered aerodynamic
design to provide excellent EPA
ratings and an aesthetically
pleasing appearance. Dark bronze
polyester powder coat finish
assures corrosion resistance and
long-lasting aesthetics.
U.L. listed and CSA certified for
wet locations.
18 1/2"
(470mm)
FLOODLIGHTING
COOPER LIGHTING - LUMARK®
20 1/2" (521mm)
150-400W HPS & MH,
1000W HPS
9 1/2" (241mm)
1000W
Lamp
Placement
1000W HPS
10 1/2" (267mm)
Y O K E D R I L L I N G PAT T E R N
NK
NIGHTHAWK III
3 3/4" [95mm]
1 7/8" [48mm]
1 1/16"
[27mm]
1 5 0 W - 1 0 0 0 W
20 1/2" (521mm)
9/16" [14mm]
dia. hole (2)
E PA - E f f e c t i v e P r o j e c t e d A r e a : 2 . 7
7/8" [22mm]
dia. hole
High Pressure Sodium
Pulse Start Metal Halide
Metal Halide
YOKE FLOODLIGHT
O R D E R I N G I N F O R M AT I O N
S A M P L E N U M B E R : H P N K - Y 7 6 - 4 0 0 - M T- Q
Lamp Type
Series
HP=High
NK=Nighthawk III
Pressure
Sodium
MH=Metal
Halide
MP=Pulse
Start MH
(CWA) 1
Mounting
Type 2
Y=Yoke
Beam Spread
76=7Hx6V
Lamp Wattage
150=150W
175=175W
200=200W 3
250=250W
320=320W 3
350=350W 3
400=400W
600=600W
750=750W 4
1000=1000W
Voltage 5
Options &
120V
Accessories
208V
(See Below)
240V
277V
347V
480V
MT=Multi-Tap 6
TT=Triple-Tap 6
• Formed aluminum flush
draw-action latches offer
easy access to lamp
compartment without
tools and maintain
integrity of seal when
closed
• Die-cast aluminum with
integral cast hinges for
removal without tools
For Pole Information Refer to Cooper Lighting Pole Section.
Options (add as suffix) 7
Q=Quartz Restrike DC Bayonet Base (Hot Strike Only)
EM=Quartz Restrike Cold Start Time Delay Relay
(Not available in 1000W)
F1=Single Fuse (120, 277 or 347V)
F2=Double Fused (208, 240 or 480V)
LL=Lamp Included 8
PER=NEMA Twistlock Photocontrol Receptacle
T=Removable Quick-Disconnect Power Tray
(Cannot be used with 1000W units)
• Die-formed heavy-duty
housing is made of
cold-rolled steel and
finished in highly
reflective white polyester
powder coat. Stamped
steel ballast mounting
bracket is integral part
of housing
Accessories (order separately)
TV/NK-XX=Top or Bottom Visor (Specify Color)
SV1/NK-XX=Single Side Visor (Specify Color)
SV/NK-XX=Double Side Visor (Specify Color)
WG/NK-XX=Wire Guard (Specify Color)
TKS=Trunnion or Yoke 2 3/8" Slipfitter
OA/RA1013=Shorting Cap for NEMA Twistlock Photocontrol
Receptacle
OA/RA1016=Photoelectric Control, 105-285-Volt NEMA Type
OA/RA1027=Photoelectric Control, 480 Volt NEMA Type
OA/RA1028=Field Installed NEMA Twistlock Photocontrol Receptacle
(Order Photocontrol Separately)
OA/RA1201=Photoelectric Control, 347 Volt NEMA Type
VS/NK=Vandal Shield
VS/NK/1000=Vandal Shield for 1000W Units
• Heat- and impact-resistant tempered glass. Lens
is mounted flush with door
surface to reduce wind
drag and prevent dirt
or moisture from
accumulating
• Door gasket is foam-inplace silicone, providing
maximum protection of
interior components from
the elements
• Heavy-duty steel yoke
provides flexibility in
mounting from a variety
of surfaces
• Approximate net weight:
59 lbs. (27 kgs.)
NOTES: 1 200, 250, 320, 350, 400, & 750W. 2 Slipfitter and Trunnion mounts also available. 3 Pulse Start Metal Halide only. 4 HPS & MP only. 5 Products also available
in non-US voltages and 50Hz for international markets. Consult factory for availability and ordering information. 6 Multi-Tap ballast is 120/208/240/277V wired
277V. Triple-Tap ballast is 120/277/347V wired 347V. Add desired voltage to end of catalog number. 7 Must be listed in the order shown and seperated by a
dash. 8 Lamp is shipped separate from luminaire. Lamp is Cooper designated product based on luminaire requirements. Specified lamps must be ordered as a
separate line item.
COOPER LIGHTING
387
FLOODLIGHTING
COOPER LIGHTING - LUMARK®
DIMENSIONS
DESCRIPTION
The Lumark Nighthawk III
utilizes a soft-cornered
aerodynamic design to
provide excellent EPA ratings
and an aesthetically pleasing
appearance. Dark bronze
polyester powder coat finish
assures corrosion resistance
and long-lasting aesthetics.
U.L. listed and CSA certified
for wet locations.
24"
(610mm)
18 1/2"
(470mm)
20 1/2" (521mm)
NK
NIGHTHAWK III
TRUNNION
D R I L L I N G PAT T E R N
1000W
Lamp
Placement
1000W HPS
10 1/2" (267mm)
3 3/4" [95mm]
1 7/8" [48mm]
1 1/16"
[27mm]
1 5 0 - 1 0 0 0 W
High Pressure Sodium
Pulse Start Metal Halide
Metal Halide
150-400W HPS & MH, 1000W HPS
9 1/2" (241mm)
9/16" [14mm]
dia. hole (2)
7/8" [22mm]
dia. hole
20 1/2" (521mm)
TRUNNION FLOODLIGHT
E PA - E f f e c t i v e P r o j e c t e d A r e a : 2 . 7
O R D E R I N G I N F O R M AT I O N
• Die-formed heavy-duty
housing is made of
cold-rolled steel and
finished in highly
reflective white polyester
powder coat. Stamped
steel ballast mounting
bracket is integral part
of housing
• Formed aluminum flush
draw-action latches offer
easy access to lamp
compartment without
tools and maintain
integrity of seal when
closed
• Die-cast aluminum with
integral cast hinges for
removal without tools
• Heat- and impact-resistant tempered glass. Lens
is mounted flush with door
surface to reduce wind
drag and prevent dirt
or moisture from
accumulating
• Door gasket is foam-inplace silicone, providing
maximum protection of
interior components from
the elements
S A M P L E N U M B E R : H P N K - T 7 6 - 4 0 0 - M T- Q
Lamp Type
Series
HP=High
NK=Nighthawk III
Pressure
Sodium
MH=Metal
Halide
MP=Pulse Start MH (CWA) 1
Mounting
Type 2
T=Trunnion
Beam Spread
76=7Hx6V
Lamp Wattage
150=150W
175=175W
200=200W
250=250W
320=320W 3
350=350W 3
400=400W
600=600W
750=750W 4
1000=1000W
Voltage 5
Options &
120V
Accessories
208V
(See Below)
240V
277V
347V
480V
MT=Multi-Tap 6
TT=Triple-Tap 6
For Pole Information Refer to Cooper Lighting Pole Section.
Options (add as suffix) 7
Q=Quartz Restrike DC Bayonet Base (Hot Strike Only)
EM=Quartz Restrike Cold Start Time Delay Relay
(Not available in 1000W)
F1=Single Fuse (120, 277 or 347V)
F2=Double Fused (208, 240 or 480V)
LL=Lamp Included 8
PER=NEMA Twistlock Photocontrol Receptacle
T=Removable Quick-Disconnect Power Tray
(Cannot be used with 1000W units)
Accessories (order separately)
TV/NK-XX=Top or Bottom Visor (Specify Color)
SV1/NK-XX=Single Side Visor (Specify Color)
SV/NK-XX=Double Side Visor (Specify Color)
WG/NK-XX=Wire Guard (Specify Color)
OA/RA1013=Shorting Cap for NEMA Twistlock Photocontrol
Receptacle
OA/RA1016=Photoelectric Control, 105-285-Volt NEMA Type
OA/RA1027=Photoelectric Control, 480 Volt NEMA Type
OA/RA1028=Field Installed NEMA Twistlock Photocontrol Receptacle
(Order Photocontrol Separately)
OA/RA1201=Photoelectric Control, 347 Volt NEMA Type
VS/NK=Vandal Shield
VS/NK/1000=Vandal Shield for 1000W Units
• Die-formed steel trunnion
is easily adapted to many
areas and allows easy
fixture aiming
• Approximate net weight:
56 lbs. (25 kgs.)
388
COOPER LIGHTING
NOTES: 1 200, 250, 320, 350, 400, & 750W (Limited lamp availability, consult factory). 2 Slipfitter and Yoke mounts also available. 3 Pulse Start Metal Halide only.
4 HPS & MP only. 5 Products also available in non-US voltages and 50Hz for international markets. Consult factory for availability and ordering information.
6 Multi-Tap ballast is 120/208/240/277V wired 277V. Triple-Tap ballast is 120/277/347V wired 347V. Add desired voltage to end of catalog number. 7 Must be
listed in the order shown and seperated by a dash. 8 Lamp is shipped separate from luminaire. Lamp is Cooper designated product based on luminaire
requirements. Specified lamps must be ordered as a separate line item.
DIMENSIONS
DESCRIPTION
TRUNNION MOUNT
The Lumark Warrior offers a
variety of lamp and mounting
options in high pressure sodium
and metal halide, and can be
installed, lamped and serviced
with the most basic tools.
U.L. listed and labeled for wet
locations. CSA certified.
SLIPFITTER MOUNT
13"
[330mm]
4" [102mm]
15"
[381mm]
6"
[152mm]
7"
[178mm]
YOKE MOUNT
FLOODLIGHTING
COOPER LIGHTING - LUMARK®
D R I L L I N G PAT T E R N F O R Y O K E M O U N T
A
14 7/8"
[378mm]
B
C
2"
[51mm]
4 3/4"
[121mm]
6 1/2" [165mm]
15 3/4" [400mm]
15 3/4"
[400mm]
WR WARRIOR
2"
[51mm]
A.) (1) Center Hole 13/16" [21mm]
B.) (2) Holes 3/8" [10mm]
C.) (2) Holes 7/16" [11mm]
1 0 0 - 4 0 0 W
High Pressure Sodium
Pulse Start Metal Halide
Metal Halide
SLIPFITTER-MOUNTED
TRUNNION-MOUNTED OR
YOKE-MOUNTED
FLOODLIGHT
O R D E R I N G I N F O R M AT I O N
SAMPLE NUMBER: HPWR-65S-400-MT
• Corrosion-resistant
captive retaining screws
Lamp Type
Series
HP=High
WR=Warrior
Pressure
Sodium 1
MH=Metal
Halide
MP=Pulse
Start MH (CWA) 2
Distribution
65=6x5
Mounting
S=Slipfitter
T=Trunnion
Y=Yoke
Lamp Wattage 3
100=100W
150=150W
175=175W
200=200W 4
250=250W
320=320W 4
350=350W 4
400=400W
250/400=250/400W
(wired 250)
Voltage 5
Options &
120V
Accessories
208V
(See Below)
240V
277V
347V
480V
TT=Triple-Tap 6
MT=Multi-Tap 7
5T=5-Tap 8
STOCK SAMPLE NUMBER (Lamp Included)
SAMPLE NUMBER: XS15
Series
X=Slipfitter
W=Trunnion
Lamp Type
S=High Pressure Sodium
M=Metal Halide
Lamp Wattage
15=150W
17=175W
25=250W
40=400W
Option
5T=5-Tap
(400W Metal Halide Only)
• Watertight die-cast
aluminum housing door
is finished in dark bronze
polyester powder coat.
Cast ridge for water tight
seal against gasketing
• Full circumference,
high-temperature
foam-in-place silicone
gasketing seals out
external contaminants
• Mogul-base porcelain
socket, except 150W
Metal Halide and below
has medium-base
• High power factor ballast
with class H insulation.
Minimum starting
temperature is -40°C (-40°
F) for HPS and -30°C (-20°
F) for MH, MP and ML
NOTES: Options not available with stock products.
Order Accessories as separate items for field installation.
Refer to standard ordering information to add options
and accessories.
For Pole Information Refer to Cooper Lighting Pole Section.
Options (add as suffix) 11
Q=Quartz Restrike DC Bayonet Base (Hot strike only)
EM=Quartz Restrike (cold start with time delay)
EM/SC=Emergency Separate Circuit
F1=Single Fuse (120, 277 or 347V)
F2=Double Fused (208, 240 or 480V)
LL=Lamp Included
PER=NEMA Twistlock Photocontrol Receptacle
C23=3' of 12-3 Cord, Prewired (Specify Single Voltage)
C42=2' of 14-3 Cord, Prewired (Specify Single Voltage)
C43=3' of 14-3 Cord, Prewired (Specify Single Voltage)
C63=3' of 16-3 Cord, Prewired (Specify Single Voltage)
Accessories (order separately)
OA/RA1014=Photoelectric Control, 120 Volt NEMA Type
OA/RA1016=Photoelectric Control, 105-285 Volt NEMA Type
OA/RA1027=Photoelectric Control, 480 Volt NEMA Type
PB120V=Button Photocontrol, 120V, Slipfitter Only
OA1013=Shorting Cap
TV/WR=Top Visor
WG/WR=Wire Guard
VG/WR=Vandal Shield
FA5XX=2" Slipfitter For Trunnion Fixture
(Specify Color. BRZ is standard)
RABXX=Right Angle Pipe Bracket For Slipfitters
(Specify Color. BRZ is standard)
SABXX=Steel Angle Bracket For Trunnion
(Specify Color. BRZ is standard)
NOTES: 1 Not available in 175W. 2 200, 250, 320, 350 & 400W only (Limited lamp availability, consult factory). 3 Medium-base socket for Metal Halide 150W & lower.
4 Pulse start Metal Halide only. 5 Products also available in non-us voltages & 50Hz for international. 6 Mult-tap ballast 120/208/240/277V. 7 Triple-tap ballast
120/277/347V. 8 5-Tap ballast 120/208/240/277/480V. 400W Metal Halide only. 9 Must be listed in the order shown and seperated by a dash.
• Variable mountings of
either 3/16" galvanized
steel trunnion (shown
below) or integral
die-cast aluminum
slipfitter (shown in
photo to right). Slipfitter
fits 2 3/8" - 3" O.D. tenon.
Heavy-duty steel yoke
provides flexibility in
mounting and aiming
from a variety of surfaces
• Approximate net weight:
35 lbs. (16 kgs.)
COOPER LIGHTING
385
DESCRIPTION
DIMENSIONS
NOMINAL SIZE
1' x 4'
1' x 4' (OU)
2' x 2'
2' x 4'
20" x 24"
20" x 48"
A
11-3/4" (298mm)
11-3/4" (298mm)
23-3/4" (603mm)
23-3/4" (603mm)
19-3/4" (502mm)
19-3/4" (502mm)
The Paralux III series features
recessed aesthetics and the
latest in energy efficient
technology. The luminaire
incorporates a 3” precision cell
louver into a nominal 5-1/2”
deep para-contoured fixture
housing. This combination
creates a total high performance
parabolic optical assembly for
optimum performance. The
Paralux III series offers balanced
illumination with reduced glare,
increased VCP’s and excellent
shielding. The series is
compatible with all of today’s
popular ceiling systems. The
Paralux III series is an excellent
choice for commercial office
spaces, schools, hospitals or
retail merchandising areas.
B
6-5/8" (168mm)
8-1/4" (210mm)
5-5/8" (143mm)
5-5/8" (143mm)
5-5/8" (143mm)
5-5/8" (143mm)
2EP3GAX SERIES
1' x 4', 2' x 2', 2' x 4',
20" x 24" or
20" x 48" Parabolic
O R D E R I N G I N F O R M AT I O N
1, 2, 3 or 4 Lamp
Parabolic Louver
SAMPLE NUMBER: 2EP3GAX-332S36I-120V-EB81-U
2048= 20" Width
x 48" Length
2024= 20" Width
x 24" Length
HM=Hard
Metric
HR=Heat
Removal (1)
HRDO=Heat
Removal
Damper Open
HRDC=Heat
Removal
Damper Closed
Number
of Lamps (4)
1, 2, 3 or 4 lamps
(Not included)
Width
2'=2' width
Blank=1' width
or 20" width
EP=Paralux Louver
3=3" Louver Depth
Trim Type
G=Grid/Lay-in (Standard)
G or T=Concealed T
G or T=Slot Grid (2)
F=Flange Trim
MZ=Modular Trim
Wattage (Length)
U3=40W T12 (24”)
U6=40W T12 (24”)
U6T8=31W T8 (24”)
20=20W T12 (24”)
17=17W T8 (24”)
U15/8=31W T8 (24”)
BX40=40W Biax (24”)
40=40W T12 (48”)
32=32W T8 (48”)
Louver Color
S=Silver
G=Gold
W=White
Convertible Fixture (3) Standard G (Grid)
Type-Fixtures can be field converted to
T-option or vice-versa. Fixture also
adaptable with flanged or modular trims.
AX=Air Supply Floating Louver
X=Blank Side/Floating Louver Non-Air Supply (Omit A)
AVX=Air Supply Floating Louver
with Directional Air Vane (Add V)
Cell Configuration*
(See below for Louver Options)
Louver Finish
H=Semi-Specular/Haze (Gold only)
I=Semi-Specular/Haze (Low
Iridescent) Standard (Silver Only)
MI=Specular/Mirrored (Low
Iridescent) (Silver Only)
P=Painted (White only)
PARALUX III
COOPER LIGHTING - METALUX®
Voltage (5)
120V=120 Volt
277V=277 Volt
347V=347 Volt
UNV=Universal
Voltage 120-277(6)
Options
GL=Single
Element Fuse
GM=Double
Element Fuse
WTR=White
Reveal
Lamps - for lamps
installed, see lamp
options table
Flex - for flex
installed, see flex
ordering table
Emergency - for
EM installed, see
EM options table
Packaging
(See Options
U=Unit Pack
Section)
PAL=Job Pack,
out of carton
Ballast Type (5)
PALC=Job Pack,
Blank=Standard Magnetic in carton
Ballast (Biax & 20W)
LE3=T12 Magnetic Energy Saving
LEOC8=T8 Magnetic Energy Saving
EB8 = T8 Electronic Instant Start.
Total Harmonic Distortion < 20%
No. of Ballast
1, 2 or 3
EB8 /PLUS= T8 Electronic Instant Start.
High Ballast Factor >1.13. Total
No. of
Harmonic Distortion < 20%
Ballast
1, 2 or 3
ER8 = T8 Electronic Program Rapid Start.
Total Harmonic Distortion < 10%
No. of Ballast
1, 2 or 3
TEB8 =T8 Electronic Instant Start. Total
Harmonic Distortion < 10%
No. of Ballast
1, 2 or 3
EB5 = T5 Biax Electronic Instant Start.
Total Harmonic Distortion < 20%
No. of Ballast
1, 2 or 3
TEB5 =T5 Biax Electronic Instant Start.
Total Harmonic Distortion < 10%
No. of Ballast
1, 2 or 3
EB2 =T12 Electronic Rapid Start.
PA R A L U X I I I
R E C E S S E D S TAT I C O R
A I R S U P P LY T R O F F E R
Options
No. of Ballast
1 or 2
DLS=Digital Lighting System Dimming
(For complete details on generic or to specify
manufacturer’s ballast see pg. 291)
• Equipped with energy
saving ballasts/complies
with federal energy
efficiency standards
• Computer designed,
precision cell louver
technology
• Field convertible feature
• Self locking spring loaded
cam latches/ T hinges
• Four auxiliary fixture end
suspension points provided
• Interlocking tabs and
screws secure end plates
• End plate grid-lock
feature (1)
• Efficient air handling
options
•
DLS Dimming Ballasts are
available
• Floating louver/black reveal
P R O D U C T I N F O R M AT I O N F O R PA R A L U X I I I
Housing
Size
Louver Cell
Configuration*
Number
of Cells
1' x 2'
13, 14, 23, 24
3, 4, 6, 8
1' x 4'
16, 18, 26, 28
6, 8, 12, 16
2' x 2'
23, 33, 34, 44
6, 9, 12, 16
20" x 24"
23, 24, 33, 34
6, 8, 9, 12
20" x 48"
26, 36, 38
12, 18, 24
2' x 4'
26, 28, 36, 38, 46, 48
12, 16, 18, 24, 24, 32
• For information on flanged
fixture, including ceiling
opening size, see Technical
Section.
• UL/CUL Listed. Suitable for
damp locations.
*Example: 36= 3 rows of 6 (18 cells)
NOTES: (1) Integral end plate grid lock feature not available in heat removal. (2) An EQ Grid Clip is recommended for all 9/16" ceiling systems. (3) Convertibility applies to
housing only, appropriate shielding media assemblies must be utilized. (4) Standard off-center ballast on 3-lamp fixtures. (5) Products also available in non-US voltages and
frequencies for international markets. (6) Not available when specifying emergencies, voltage must be specific.
For complete product data, reference the Fluorescent Specification binder. Specifications & dimensions subject to change without notice. Consult your Cooper Lighting
Representative for availability and ordering information.
COOPER LIGHTING
225
WALL BRACKETS
COOPER LIGHTING - METALUX®
DESCRIPTION
BC SERIES
DIMENSIONS
The BC Series is an energy
efficient luminaire designed for
versatility in application and
performance. The BC Series
features an opal white acrylic
refractor that produces a 180°
uniform light distribution
pattern. The versatile BC Series
combines quality and economy
in a multi-purpose wall bracket.
The luminaire is perfect for
illuminating corridors, stairwells,
lavatories, dressing rooms,
patient rooms, utility/task and
area lighting.
NOMINAL LENGTH
A
B
2', 3', 4'
4-1/4" (108mm)
4-1/4" (108mm)
2', 3' or 4'
1 or 2 Lamps
ALL PURPOSE
WA L L B R A C K E T
O R D E R I N G I N F O R M AT I O N
SAMPLE NUMBER: BC-232-120V-EB81-U
• Equipped with energy
saving ballasts/complies
with federal energy
efficiency standards
• Contemporary styling
BC=Series
Number of
Lamps
1 or 2 lamps
(Not Included)
• Die formed steel housing
• Baked white enamel finish
• Extruded smooth opal
white acrylic refractor
• 180° uniform light
distribution
• Decorative opaque
injection molded white end
caps
• Easy wiring access
Wattage (Length)
20=20W T12 (24")
17=17W T8 (24")
30=30W T12 (36")
25=25W T8 (36")
40=40W T12 (48")
32=32W T8 (48")
Starting Type
LTS=Low Trigger Start
(20 Watt only) (120V only)
HTS=High Trigger Start
(20 Watt only)
Voltage (1)
120V=120 Volt
277V=277 Volt
347V=347 Volt
UNV=Universal Voltage 120-277 (2)
Options
GL=Single Element Fuse
GM=Double Element Fuse
Emergency - for EM installed, see EM
options table (3)
Options
(1)
(See Options
Section)
Packaging
U=Unit Pack
Ballast Type
Blank=Standard Magnetic Ballast
(20W only)
LE3=T12 Magnetic Energy Saving
EB8 = T8 Electronic Instant Start.
Total Harmonic Distortion < 10%
No. of Ballast
1, 2 or 3
EB8 /PLUS= T8 Electronic Instant Start.
High Ballast Factor >1.13. Total
No. of
Harmonic Distortion < 20%
Ballast
1, 2 or 3
ER8 = T8 Electronic Program Rapid Start.
Total Harmonic Distortion < 10%
No. of Ballast
1, 2 or 3
EB2 =T12 Electronic Rapid Start.
No. of Ballast
1 or 2
(For complete details on generic or to specify
manufacturer’s ballast see pg. 469)
• Vertical wall or horizontal
ceiling mounting
application
• Grounded convenience
outlet and switching
available, see Options page
• UL/CUL Listed. Suitable for
damp locations.
NOTES: (1) Products also available in non-US voltages and frequencies for international markets. (2) Not available when specifying emergencies, voltage must be specific.
(3)
Non available for 2' version.
430
COOPER LIGHTING
For complete product data, reference the Fluorescent Specification binder. Specifications & dimensions subject to change without notice. Consult your Cooper Lighting
Representative for availability and ordering information.
INDUSTRIALS
COOPER LIGHTING - METALUX®
DIMENSIONS
DESCRIPTION
DIMSERIES
The DIM Series is an energy
efficient family of industrials that
features premium performance
and durability. The DIM
incorporates heavy duty,
embossed, reflectors that
precisely direct and effectively
control light. The versatile DIM
can be installed using various
mounting methods and
numerous options and
accessories are available. The
DIM can be utilized in simple
task and area lighting to the
most demanding industrial
applications.
NOMINAL LENGTH
4', 8'
A
13 1/2" (343mm)
B
6 5/8" (168mm)
4’ or 8’ Industrial
2, 3 or 4 Lamps
H E AV Y D U T Y I N D U S T R I A L
• Equipped with energy
saving ballasts/complies
with federal energy
efficiency standards
O R D E R I N G I N F O R M AT I O N
SAMPLE NUMBER: DIM-232-120V-EB81-U
• Die formed channels
• Heavy duty apertured,
(DIM) or closed top, (DCIM)
reflector
• Deep draw full width
reflector ribs add rigidity
• Metal clad lampholders
with spring loaded sockets
• Apertured reflector (DIM)
standard with 20% uplight
• Baked white enamel finish
• Porlux, Porcelain and
Silverlining finishes
available (3)
• Wire guards, gym guards,
lens frames, and metal
louvers available for
special applications
• UL/CUL Listed. Suitable for
damp locations.
Tandem
Blank=4' Length
8T=8' Length
Series
DIM=
Apertured
Reflector
DCIM=
Closed Top
Reflector
Lamp Spacing
Blank=Standard Spacing
N=Narrow Spacing for 2
Lamp Only (10% uplight)
Silver
Reflector
SS=
SilverLining
Reflector (3)
Number
of Lamps
2, 3 or 4
Lamps
(Not included)
Wattage (Length)
40=34/40W T12 (48")
32=32W T8 (48")
48=40W T12 (48") SL
48HO=60W T12 (48") HO
48HO=44W T8 (48") HO
48VHO=110W (48") VHO
96=60/75W T12 (72") SL
96=59W T8 (96") SL
96HO=95/110W T12 (96") HO
96HO=86W T8 (96") HO
96VHO=185/215W (96") VHO
96PG=185/215W (96") PG
Voltage (1)
120V=120 Volt
277V=277 Volt
347V=347 Volt
UNV=Universal Voltage 120-277 (2)
Options
GL=Single Element Fuse
GM=Double Element Fuse
Emergency - for EM installed, see
EM options table
Options
(1)
(See Options
Section)
Ballast Type
Blank=Standard Magnetic Ballast
LE3=T12 Magnetic Energy Saving
LEOC8=T8 Magnetic Energy Saving
EB8 = T8 Electronic Instant Start.
Total Harmonic Distortion < 20%
No. of Ballast
1, 2 or 3
EB8 /PLUS= T8 Electronic Instant Start.
High Ballast Factor >1.13. Total
No. of
Harmonic Distortion < 20%
Ballast
1, 2 or 3
ER8 = T8 Electronic Program Rapid Start.
Total Harmonic Distortion < 10%
No. of Ballast
1, 2 or 3
TEB8 =T8 Electronic Instant Start. Total
Harmonic Distortion < 10%
No. of Ballast
1, 2 or 3
EB2 =T12 Electronic Rapid Start.
Packaging
U=Unit Pack
4B=4 Bulk
No. of Ballast
1 or 2
(For complete details on generic or to specify
manufacturer’s ballast see pg 291)
NOTES: (1) Products also available in non-US voltages and frequencies for international markets. (2) Not available when specifying emergencies, voltage must be specific.
(3)
Silver lining not available on fixtures with HO, VHO or PG.
284
COOPER LIGHTING
For complete product data, reference the Fluorescent Specification binder. Specifications & dimensions subject to change without notice. Consult your Cooper Lighting
Representative for availability and ordering information.
INDUSTRIALS
COOPER LIGHTING - METALUX®
DESCRIPTION
DIM SERIES
4' or 8' Industrial
2, 3 or 4 Lamps
DIMENSIONS
The DIM Series is an energy
efficient family of industrials
that features premium
performance and durability. The
DIM incorporates heavy duty,
embossed, reflectors that
precisely direct and effectively
control light. The versatile DIM
can be installed using various
mounting methods and
numerous options and
accessories are available. The
DIM can be utilized in simple
task and area lighting to the
most demanding industrial
applications.
NOMINAL LENGTH
4', 8'
A
13 1/2" (343mm)
B
6 5/8" (168mm)
H E AV Y D U T Y I N D U S T R I A L
• Equipped with energy
saving ballasts/complies
with federal energy
efficiency standards
O R D E R I N G I N F O R M AT I O N
SAMPLE NUMBER: DIM-232-120V-EB81-U
• Die formed channels
• Heavy duty apertured,
(DIM) or closed top, (DCIM)
reflector
• Deep draw full width
reflector ribs add rigidity
Tandem
Blank=4' Length
8T=8' Length
Series
DIM=
Apertured Reflector
DCIM=
Closed Top Reflector
Silver
Reflector
SS=
SilverLining
Reflector (3)
Number
of Lamps
2, 3 or 4
Lamps
(Not included)
• Porlux and Silverlining
finishes available (3)
Wattage (Length)
40=34/40W T12 (48")
32=32W T8 (48")
48=40W T12 (48") SL
48HO=60W T12 (48") HO
48HO=44W T8 (48") HO
48VHO=110W (48") VHO
96=60/75W T12 (72") SL
96=59W T8 (96") SL
96HO=95/110W T12 (96") HO
96HO=86W T8 (96") HO
96VHO=185/215W (96") VHO
96PG=185/215W (96") PG
• Wire guards, gym guards,
lens frames, and metal
louvers available for
special applications
Voltage (1)
120V=120 Volt
277V=277 Volt
347V=347 Volt
UNV=Universal Voltage 120-277 (2)
• UL/CUL Listed. Suitable for
damp locations.
Options
GL=Single Element Fuse
GM=Double Element Fuse
Emergency - for EM installed, see EM options table
• Metal clad lampholders
with spring loaded sockets
• Apertured reflector (DIM)
standard with 20% uplight
• Baked white enamel finish
Lamp Spacing
Blank=Standard Spacing
N=Narrow Spacing for 2
Lamp Only (10% uplight)
Packaging
Options
(See Options
U=Unit Pack
Section)
Ballast Type (1)
4B=4 Bulk
Blank=Standard Magnetic Ballast
LE3=T12 Magnetic Energy Saving
EB8 = T8 Electronic Instant Start.
Total Harmonic Distortion < 10%
No. of Ballast
1, 2 or 3
EB8 /PLUS= T8 Electronic Instant Start.
High Ballast Factor >1.13. Total
No. of
Harmonic Distortion < 20%
Ballast
1, 2 or 3
ER8 = T8 Electronic Program Rapid Start.
Total Harmonic Distortion < 10%
No. of Ballast
1, 2 or 3
EB2 =T12 Electronic Rapid Start.
No. of Ballast
1 or 2
(For complete details on generic or to specify
manufacturer’s ballast see pg. 469)
NOTES: (1) Products also available in non-US voltages and frequencies for international markets. (2) Not available when specifying emergencies, voltage must be specific.
(3)
Silver lining not available on fixtures with HO, VHO or PG.
454
COOPER LIGHTING
For complete product data, reference the Fluorescent Specification binder. Specifications & dimensions subject to change without notice. Consult your Cooper Lighting
Representative for availability and ordering information.
RECESSED STATIC
COOPER LIGHTING - METALUX®
DIMENSIONS
DESCRIPTION
GSERIES
1' x 4', 2' x 2',
2 ' x 4 ' Tr o f f e r
2, 3 or 4 Lamp
The G Series features a nominal
3-3/4” deep low profile fixture
housing with a premium finish for
optimum performance. The series
also features recessed aesthetics
and the latest in energy efficient
technology. Luminaires are
compatible with today’s popular
ceiling systems and are available
with a number of options and
accessories for application
versatility. The G Series features
efficiency, quality, performance
and economy in a low profile
luminaire. The G Series is an
excellent choice for commercial
office spaces, schools, hospitals or
retail merchandising areas.
NOMINAL SIZE
1' x 4'
2' x 2'
2' x 4'
LOW PROFILE
COMMERCIAL GRADE
R E C E S S E D T 1 2 S TAT I C
TROFFER
• Equipped with energy
saving ballasts/complies
with federal energy
efficiency standards
A
11-3/4" (298mm)
23-3/4" (603mm)
23-3/4" (603mm)
B
3-3/4" (95mm)
3-3/4" (95mm)
3-3/4" (95mm)
O R D E R I N G I N F O R M AT I O N
SAMPLE NUMBER: 2G-240A-120V-LE3-U
• Reinforced flat white steel
door, mitered corners
• Spring loaded latch
2=2' Width
Blank=1' Width
Number of Lamps (2)
2, 3, or 4 Lamps
(Not included)
• Full length mechanical light
trap and positive end light
seal
Series
G=Grid/Lay-in – Standard (1)
• T-hinges
Wattage (Length)
40=40W T12 (48”)
20=20W T12 (24”)
U3=40W T12 (24”)
U6=40W T12 (24”)
• One piece die embossed
housing
Shielding
A=#12 PatternAcrylic
• Unibody housing/end
plates with mechanically
weld secured
• Four auxiliary fixture end
suspension points
provided
Options
(See Options
Section)
Packaging
U=Unit Pack
Ballast Type (3)
Blank=Standard Magnetic Ballast (Biax & 20W)
LE3=T12 Magnetic Energy Saving
EB2 =T12 Electronic Rapid Start.
No. of Ballast
1 or 2
(For complete details on generic or to specify
manufacturer’s ballast see pg. 291)
(See Lens and Louver Tables for
additional shielding options)
Starting Type
LTS=Low Trigger Start (20 Watt only) (2)
HTS=High Trigger Start (20 Watt only) (2)
Voltage (3)
120V=120 Volt
277V=277 Volt
347V=347 Volt
• End plate grid-lock feature
• For drywall applications,
field install flange kit
available. See Technical
Section for detail.
Options
GL=Single Element Fuse
GM=Double Element Fuse
Lamps - for lamps installed, see lamp options table
Flex - for flex installed, see flex ordering table
Emergency - for EM installed, see EM options table
• UL/CUL Listed. Suitable for
damp locations.
NOTES: (1) An EQ Grid Clip is recommended for all 9/16" ceiling systems. (2) Standard off-center ballast compartment on 3-lamp fixtures. (3) Products also available in nonUS voltages and frequencies for international markets.
234
COOPER LIGHTING
For complete product data, reference the Fluorescent Specification binder. Specifications & dimensions subject to change without notice. Consult your Cooper Lighting
Representative for availability and ordering information.
RECESSED STATIC
COOPER LIGHTING - METALUX®
DESCRIPTION
G SERIES
1' x 4', 2' x 2', 2' x 4'
Tr o f f e r
2, 3 or 4 Lamp
DIMENSIONS
The G Series features a nominal
3-3/4" deep low profile fixture
housing with a premium finish for
optimum performance. The series
also features recessed aesthetics
and the latest in energy efficient
technology. Luminaires are
compatible with today’s popular
ceiling systems and are available
with a number of options and
accessories for application
versatility. The G Series features
efficiency, quality, performance
and economy in a low profile
luminaire. The G Series is an
excellent choice for commercial
office spaces, schools, hospitals or
retail merchandising areas.
LOW PROFILE
COMMERCIAL GRADE
R E C E S S E D T 1 2 S TAT I C
TROFFER
• Equipped with energy
saving ballasts/complies
with federal energy
efficiency standards
• Reinforced flat white steel
door, mitered corners
• Spring loaded latch
• Full length mechanical light
trap and positive end light
seal
• T-hinges
• One piece die embossed
housing
2' x 4'
2' x 2'
1' x 4'
NOMINAL SIZE
1' x 4'
2' x 2'
2' x 4'
SAMPLE NUMBER: 2G-240A-120V-LE3-U
2=2' Width
Blank=1' Width
Number of Lamps (2)
2, 3, or 4 Lamps
(Not included)
Series
G=Grid/Lay-in – Standard (1)
Wattage (Length)
40=40W T12 (48")
20=20W T12 (24")
U3=40W T12 (24")
U6=40W T12 (24")
Shielding
A=#12 PatternAcrylic
Options
(See Options
Section)
Packaging
U=Unit Pack
Ballast Type (3)
Blank=Standard Magnetic Ballast (Biax & 20W)
LE3=T12 Magnetic Energy Saving
EB2 =T12 Electronic Rapid Start.
No. of Ballast
1 or 2
(For complete details on generic or to specify
manufacturer’s ballast see pg. 469)
(See Lens and Louver Tables for
additional shielding options)
Starting Type
LTS=Low Trigger Start (20 Watt only) (2)
HTS=High Trigger Start (20 Watt only) (2)
• Four auxiliary fixture end
suspension points
provided
Voltage (3)
120V=120 Volt
277V=277 Volt
347V=347 Volt
• For drywall applications,
field install flange kit
available. See Technical
Section for detail.
B
3-3/4" (95mm)
3-3/4" (95mm)
3-3/4" (95mm)
O R D E R I N G I N F O R M AT I O N
• Unibody housing/end
plates with mechanically
weld secured
• End plate grid-lock feature
A
11-3/4" (298mm)
23-3/4" (603mm)
23-3/4" (603mm)
Options
GL=Single Element Fuse
GM=Double Element Fuse
Lamps - for lamps installed, see lamp options table
Flex - for flex installed, see flex ordering table
Emergency - for EM installed, see EM options table
• UL/CUL Listed. Suitable for
damp locations.
NOTES: (1) An EQ Grid Clip is recommended for all 9/16" ceiling systems. (2) Standard off-center ballast compartment on 3-lamp fixtures. (3) Products also available in nonUS voltages and frequencies for international markets.
400
COOPER LIGHTING
For complete product data, reference the Fluorescent Specification binder. Specifications & dimensions subject to change without notice. Consult your Cooper Lighting
Representative for availability and ordering information.
INDUSTRIALS
COOPER LIGHTING - METALUX®
DIMENSIONS
DESCRIPTION
IA, ICSERIES
4’ or 8’ Industrial
2 Lamps
The IA Series is an energy
efficient family of light duty
industrials that features
premium performance and
durability. The series
incorporates sturdy embossed
reflectors that precisely direct
and effectively control light. The
IA Series can be installed using
various mounting methods and
numerous options and
accessories are available. The
series is available with both
Apertured (IA) and Closed Top
(IC) reflector combinations. The
IA Series can be utilized in
simple task and area lighting
and industrial applications.
NOMINAL LENGTH
4', 8'
4' HO, 8' HO
A
12" (305mm)
12" (305mm)
B
4 5/8" (117mm)
5 3/8" (137mm)
INDUSTRIAL
• Equipped with energy
Saving ballasts/complies
with federal energy
efficiency standards
O R D E R I N G I N F O R M AT I O N
SAMPLE NUMBER: IA-232-120V-EB81-U
• Die formed channels
• Heavy gauge apertured,
(IA) or closed top, (IC)
reflector
Tandem
Blank=4' Length
8T=8' Length
• Baked white enamel finish
• Pressure lock lampholders
(RS), spring loaded
lampholders (SL, HO)
• Wire guards available for
special application
• SilverLining Reflector
Finish available (3)
• Apertured reflector (IA)
standard with 8% uplight
• Also available in tandem 8'
lengths
• UL/CUL Listed. Suitable for
damp locations.
Series
IA=Apertured
Reflector
IC=Closed Top
Reflector
ICW=Extra Wide
Channel
Reference STW
Series With
Symmetric
Reflector
Silver
Reflector
SS=SilverLining
Reflector (3)
Number
of Lamps
2 Lamps
(Not included)
Wattage (Length)
40=34/40W T12 (48")
32=32W T8 (48")
48=40W T12 (48") SL
48HO=60W T12 (48") HO
48HO=44W T8 (48") HO
96=60/75W T12 (72") SL
96=59W T8 (96") SL
96HO=95/110W T12 (96") HO
96HO=86W T8 (96") HO
Voltage (1)
120V=120 Volt
277V=277 Volt
347V=347 Volt
UNV=Universal Voltage 120-277 (2)
Options
GL=Single Element Fuse
GM=Double Element Fuse
Emergency - for EM installed, see
EM options table
Packaging
Options
(See Options
U=Unit Pack
Section)
Ballast Type (1)
4B=4 Bulk
Blank=Standard Magnetic Ballast
LE3=T12 Magnetic Energy Saving
LEOC8=T8 Magnetic Energy Saving
EB8 = T8 Electronic Instant Start.
Total Harmonic Distortion < 20%
No. of Ballast
1, 2 or 3
EB8 /PLUS= T8 Electronic Instant Start.
High Ballast Factor >1.13. Total
No. of
Harmonic Distortion < 20%
Ballast
1, 2 or 3
ER8 = T8 Electronic Program Rapid Start.
Total Harmonic Distortion < 10%
No. of Ballast
1, 2 or 3
TEB8 =T8 Electronic Instant Start. Total
Harmonic Distortion < 10%
No. of Ballast
1, 2 or 3
EB2 =T12 Electronic Rapid Start.
No. of Ballast
1 or 2
(For complete details on generic or to specify
manufacturer’s ballast see pg 291)
NOTES: (1) Products also available in non-US voltages and frequencies for international markets. (2) Not available when specifying emergencies, voltage must be specific.
(3) Silver lining not available on fixtures with HO.
286
COOPER LIGHTING
For complete product data, reference the Fluorescent Specification binder. Specifications & dimensions subject to change without notice. Consult your Cooper Lighting
Representative for availability and ordering information.
TABLE OF CONTENTS
COOPER LIGHTING - METALUX®
PA R A B O L I C
Paralux V
2P5GAX Series
p. 388
Paralux IV
2PGAX Series
p. 390
Paralux III
2EP3GAX Series
p. 391
Paralux II
2P2GAX Series
p. 392
Paralux III
EP3GAX Series
p. 393
Paralux III
OPTICA Series
p. 394
Paralux III
P3 Series
p. 395
GC8 Series
p. 398
GR8 Series
p. 399
G Series
p. 400
GR5 Series
p. 401
GC Series
p. 402
Troffer Extended Options
p. 412
R E C E S S E D S TAT I C
Accord Series
p. 396
Accord II Series
p. 397
R E C E S S E D S TAT I C
R E C E S S E D A I R S U P P LY
Ovation Series RDI
p. 403
GCAFA Series
p. 404
SPECULAR SURFACE
2GCAFA-SS Series
p. 405
2GCAPL, 2GCAML
Series
p. 406
RK Series
p. 408
Troffer Lens Options
p. 409
Troffer Louver Options
p. 410
Troffer Lamp Options
p. 411
Emergency Options
p. 412
PMX Series
p. 413
M/MC Series
p. 414
Aerial Series ARL
p. 415
P410 Series
p. 416
UT Series
p. 417
SA Series
p. 418
WBI Series
p. 419
WB Series
p. 420
WS Series
p. 421
W Series
p. 422
WE Series
p. 423
CR Series
p. 424
WTS Series
p. 425
CL Series
p. 426
BE/BEU Series
p. 429
BC Series
p. 430
Surface/Wall Brackets
Lens & Louver Information
p. 431
Surface/Wall Brackets
EM Information
p. 432
Surface/Wall Brackets
Options
p. 433
RECESSED
Horizon Series RWW
p. 407
S U R FA C E
WA L L B R A C K E T S
BA/BU Series
p. 427
386
BI/BU Series
p. 428
COOPER LIGHTING
STRIPS
RCG Series
p. 434
STW Series
p. 435
STM Series
p. 436
STN Series
p. 437
SS Series
p. 438
SN Series
p. 439
SNL/SSL Series
p. 440
SNSM/SNRA/SMSL
Series
p. 441
CRICKET Series
SML/SM
p. 442
BASIX Series BX
p. 443
RKS/RKD Series
p. 444
F-BAY Series I5
p. 445
F-BAY Series HB/2HB
p. 446
F-BAY Series 2HBG
p. 447
F-BAY Series 2HBHD
p. 448
F-BAY Series MB
p. 449
F-BAY Series HBO/HBOT
p. 450
F-BAY Series HA
p. 451
EIM Series
p. 452
EIVM Series
p. 453
DIM Series
p. 454
DIVM Series
p. 455
DI Series
p. 456
IA/IC Series
p. 457
VT2 Series
p. 458
Industrial Lamp
Options
p. 459
Strips/Industrials
Emergency Options
p. 460
F-BAY Mounting
Options
p. 460
Strips/Industrials
Options
p. 461
F-BAY Mounting
Accessories
p. 462-463
F-BAY Occupancy
Sensors
p. 464
F-BAY Power
Connections
p. 465
TABLE OF CONTENTS
COOPER LIGHTING - METALUX®
INDUSTRIALS
M E D I C A L / TA S K
F-BAY I5/I8 Doorframes
& Wireguards p. 466
F-BAY HB Doorframes
& Wireguards p. 467
MPR2/MPR3 Series
p. 1495
O P T I O N S A N D I N F O R M AT I O N
Lens Options for GC, GC8, G, GR8, GR5 and GCAFA/RA
409
Lamp Information for I5, HB, 2HBG and ARL
459
Louver Options for GC, GC8, G, GR8 and GCAFA/RA
410
460
Lamp Options for P5, P4, EP3, P2, RDI, GC, GC8, GR8,
GR5, GCA, RWW, AC and AC2
411
Emergency Options for RCG, STW, STM, STN,
SS, SSL, SN, SNL, SNSM, SNRA, SM, SML,
BSX, EIM, EIVM, DI, DIM, DIVM, IA, IC, VT2, I5
I8, HB, 2HB, 2HBHD, 2HBG, HBO, HBOT and MB
Emergency Options for P5, P4, EP3, P2, RDI, GC, GC8,
GR8, GR5, GCA, AC and AC2
412
F-Bay Mounting Options for HB, 2HB, HBO, HBOT
HA, 2HBO, 2HBOT, 2HA, 3HBO, 3HBOT, 3HA
I5 and I8
460
Extended Options for P5, P4, EP3, P3, P2, GC, GC8, G,
GR8, GCA, RWW, RDI, AC and AC2
412
431
Options for RCG, STW, STM, STN, SS, SN, SNL
SSL, SNSM, SNRA, SMSL, BSX, EIM, EIVM, DI,
DIM, DIVM, IA, IC, VT2, SM, SML, I5, I8, HB, 2HB,
2HBHD, 2HBG, HBO, HBOT and MB
461
Lens and Louver Information for M and MC
EM Surface Information for ARL, UT, M, MC, SA, WB,
WBI, W, WS, WE, CR, WTS, RWW, CL, P410, BA, BAU,
BI, BIU, BE, BEU and BC
432
Surface Options for PMX, UT, M, MC, SA, WB, WBI, W,
WS, WE, CR, WTS, CL, P410, BA, BI, BE and BC
433
F-BAY Mounting Accessories
F-BAY Occupancy Sensors
F-BAY Power Connections
F-BAY I5/I8 Doorframes & Wireguards
F-BAY HB Doorframes & Wireguards
462, 463
464
465
466
467
Troubleshooting Guide
468
Specified and Generic Ballast
469
Parabolic, Recessed and Surface Accessories
470
Strips and Industrials Accessories
471, 472
Strip Reflector Accessories
473, 474, 475
DF - Dry Wall Framing Kit
476
PI - Plug-In System
477
TILW - Tandem In-Line Wiring
478
CPI - Cross-Over Plug-In
478
Master/Satellite Wiring
479
Wiring - Flex
480
Wiring - Cord & Plug
480
MWS - Modular Wiring System
481
Ceiling Compatibilities
482, 483, 484
COOPER LIGHTING
387
STRIPS
COOPER LIGHTING - METALUX®
DIMENSIONS
DESCRIPTION
SSSERIES
2', 3', 4', 6', or 8'
Strips
1 or 2 Lamps
The SS Series is a functional and
multi-purpose strip family that
incorporates premium
performance and construction
durability. The performance
and application versatility of
this series can be increased
by incorporating optional
symmetrical or asymmetrical
reflectors. The SS Series can be
installed using various mounting
methods and numerous options
and accessories are available.
The SS Series can be the
illumination solution in
commercial, industrial,
institutional and retail
applications. An excellent choice
for storage/utility areas, coves,
display cases, shops, task and
general area lighting.
NOMINAL LENGTH
A
B
C
2', 3', 4', 6', 8'
2', 4' (Biaxial)
4-1/4" (108mm)
4-1/4" (108mm)
(T8) 3-5/8" (92mm)
3-1/2" (89mm)
(T12) 3-7/8" (98mm)
COMMERCIAL WIDE
STRIPLITE
O R D E R I N G I N F O R M AT I O N
• Equipped with energy
saving ballast/complies
with federal energy
efficiency standards
• Die formed channel
• End plate converts to
channel aligner for
continuous row mounting
• Pressure lock lampholders
(RS), spring loaded
lampholders (SL)
• Baked enamel finish
• Easy wireway
access/wireway cover
removed without tools
• Numerous KOs for easy
installation
• Also available in tandem 6',
8' lengths
• UL/CUL Listed. Suitable for
damp locations.
SAMPLE NUMBER: SS-232-120V-EB81-U
Tandem
Blank=2', 3' or
4' Length
4T=4' Length
(Biax only)
6T=6' Length
8T=8' Length
SS=Series
Number of Lamps
1 or 2 lamps
(Not Included)
Wattage (Length)
20=20W T12 (24")
17=17W T8 (24")
BX40=40W Biax (24")
BX50=50W Biax (24")
BX55=55W Biax (24")
30=30W T12 (36")
25=25W T8 (36")
40=40W T12 (48")
32=32W T8 (48")
24=20W T12 (24") SL
36=30W T12 (36") SL
48=40W T12 (48") SL
72=57W T12 (72") SL
96=75W T12 (96") SL
96=59W T8 (96") SL
Starting Type
LTS=Low Trigger Start
(20W only) (120V only)
HTS=High Trigger Start
(20W Only)
Voltage (1)
120V=120 Volt
277V=277 Volt
347V=347 Volt
UNV=Universal
Voltage 120-277 (2)
Options
GL=Single Element Fuse
GM=Double Element Fuse
Emergency - for EM installed, see EM
options table(3)
Options
(See Options
Section)
Ballast Type (1)
Blank=Standard Magnetic Ballast
LE3=T12 Magnetic Energy Saving
LEOC8=T8 Magnetic Energy Saving
EB8 = T8 Electronic Instant Start.
Total Harmonic Distortion < 20%
No. of Ballast
1, 2 or 3
EB8 /PLUS= T8 Electronic Instant Start.
High Ballast Factor >1.13. Total
No. of
Harmonic Distortion < 20%
Ballast
1, 2 or 3
ER8 = T8 Electronic Program Rapid Start.
Total Harmonic Distortion < 10%
No. of Ballast
1, 2 or 3
TEB8 =T8 Electronic Instant Start. Total
Harmonic Distortion < 10%
No. of Ballast
1, 2 or 3
EB5 = T5 Biax Electronic Instant Start.
Total Harmonic Distortion < 20%
No. of Ballast
1, 2 or 3
TEB5 =T5 Biax Electronic Instant Start.
Total Harmonic Distortion < 10%
No. of Ballast
1, 2 or 3
EB2 =T12 Electronic Rapid Start.
Packaging
U=Unit Pack
4B=4 Bulk
No. of Ballast
1 or 2
DLS=Digital Lighting System Dimming
(For complete details on generic or to specify
manufacturer’s ballast see pg. 291)
NOTES: (1) Products also available in non-US voltages and frequencies for international markets. (2) Not available when specifying emergencies, voltage must be specific.
(3) Not available for 2' version.
270
COOPER LIGHTING
For complete product data, reference the Fluorescent Specification binder. Specifications & dimensions subject to change without notice. Consult your Cooper Lighting
Representative for availability and ordering information.
INDUSTRIALS
COOPER LIGHTING - METALUX®
DESCRIPTION
VT2 SERIES
2', 4' or 8' Industrial
1, 2 or 3 Lamps
I N D U S T R I A L / VA P O R T I T E
• Equipped with energy
saving ballasts/complies
with federal energy
efficiency standards
The VT2 Series is an energy
efficient industrial vaportite
fixture that features rugged and
durable construction. The VT2
incorporates a full metal fixture
housing channel inside a
reinforced fiberglass housing
with a high impact diffuser and
positive cam latching. This
Vaportite series is suitable for
interior and exterior applications
and can be surface or chain
mounted. The VT2 Series has
been designed for maximum
performance in commercial,
institutional and industrial
environments where
weathering, humidity and dust
or corrosive fumes are present.
DIMENSIONS
NOMINAL LENGTH
2', 4', 8'
4', 8', 8' (HO)
A
7" (178mm)
7" (178mm)
B
5" (127mm)
5 7/8" (149mm)
O R D E R I N G I N F O R M AT I O N
SAMPLE NUMBER: VT2-232DR-120V-EB81-WL-U
• Reinforced fiberglass
housing
• High Impact acrylic/DR
diffuser material
• Continuous polyurethane
gasketing formed to
housing provides a
seamless seal
• Watertite hubs standard at
each end accepts 1/2"
conduit
• Optional top only hub entry
or combination top and
end hub entry available for
stem mounting
applications
• Die formed galvanized
steel mounting brackets
(Standard)
• Baked white enamel finish
internal channel/high
reflectance
• No holes required for
surface/chain mounting
• Unitized internal/external
brass mounting stud for
structural integrity and
continuity of ground
• U.L. Listed for wet
locations (standard)
• UL/CUL Listed. Suitable for
damp locations.
Tandem
Blank=
4' Length
8T=8' Length
Series
VT2=Vapor-Tite
Number of
Lamps (3)
1, 2 or 3 Lamps
(Not included)
Wattage (Length)
20=20W T12 (24")
17=17W T8 (24")
BX40=40W Biax (24")(5)
BX50=50W Biax (24")(5)
40=34/40W T12 (48")
32=32W T8 (48")
48=40W T12 (48") SL
48HO=60W T12 (48") HO
48HO=44W T8 (48") HO
96=60/75W T12 (72") SL
96=59W T8 (96") SL
96HO=95/110W T12 (96") HO
96HO=86W T8 (96") HO
Lens
DR=Internal Prismatic Lens/15% DR High
Impact Additive (Standard)
DR-100=100% High Impact Additive
LEX=High Impact Clear Polycarbonate
LEXAN Lens/Low Brightness Pattern
WL=Wet
Label
Options
(See Options
Section)
Packaging
U=Unit Pack
Ballast Type (1)
Blank=Standard Magnetic Ballast
(Biax only)
LE3=T12 Magnetic Energy Saving
EB8 = T8 Electronic Instant Start.
Total Harmonic Distortion < 10%
No. of Ballast
1, 2 or 3
EB8 /PLUS= T8 Electronic Instant Start.
High Ballast Factor >1.13. Total
No. of
Harmonic Distortion < 20%
Ballast
1, 2 or 3
ER8 = T8 Electronic Program Rapid Start.
Total Harmonic Distortion < 10%
No. of Ballast
1, 2 or 3
EB5 = T5 Biax Electronic Instant Start.
Total Harmonic Distortion < 20%
No. of Ballast
1, 2 or 3
TEB5 =T5 Biax Electronic Instant Start.
Total Harmonic Distortion < 10%
No. of Ballast
1, 2 or 3
EB2 =T12 Electronic Rapid Start.
No. of Ballast
1 or 2
DLS=Digital Lighting System Dimming
(For complete details on generic or to specify
manufacturer’s ballast see pg. 469)
Starting Type
LTS=Low Trigger Start (20 Watt only) (120V only)
HTS=High Trigger Start (20 Watt only)
Voltage (1)
120V=120 Volt
277V=277 Volt
347V=347 Volt
UNV=Universal Voltage 120-277 (2)
GL=Single Element Fuse
GM=Double Element Fuse
Emergency - for EM installed, see EM options table (4)
NOTES: (1) Products also available in non-US voltages and frequencies for international markets. (2) Not available when specifying emergencies, voltage must be specific.
(3)
3-lamp only available for 32W T8 lamps. (4) Not available for 2' units. (5) 1 Lamp only.
458
COOPER LIGHTING
For complete product data, reference the Fluorescent Specification binder. Specifications & dimensions subject to change without notice. Consult your Cooper Lighting
Representative for availability and ordering information.
DIMENSIONS
NOMINAL LENGTH
2', 4', 8'
4', 8', 8' (HO)
DESCRIPTION
A
7" (178mm)
7" (178mm)
B
5" (127mm)
5 7/8" (149mm)
The VT2 Series is an energy
efficient industrial vaportite
fixture that features rugged and
durable construction. The VT2
incorporates
a full metal fixture housing
channel inside a reinforced
fiberglass housing with a high
impact diffuser and positive cam
latching. This Vaportite series is
suitable for interior and exterior
applications and can be surface
or chain mounted. The VT2
Series has
been designed for maximum
performance in commercial,
institutional and industrial
environments where weathering,
humidity and dust or corrosive
fumes are present.
O R D E R I N G I N F O R M AT I O N
INDUSTRIALS
COOPER LIGHTING - METALUX®
VT2SERIES
2’, 4’ or 8’ Industrial
1, 2 or 3 Lamps
I N D U S T R I A L / VA P O R T I T E
SAMPLE NUMBER: VT2-232DR-120V-EB81-WL-U
Tandem
Blank=4' Length
8T=8' Length
Series
VT2=Vapor-Tite
Number of
Lamps (3)
1, 2 or 3 Lamps
(Not included)
Wattage (Length)
20=20W T12 (24”)
17=17W T8 (24”)
BX40=40W Biax (24”)
BX50=50W Biax (24”)
40=34/40W T12 (48”)
32=32W T8 (48”)
48=40W T12 (48”) SL
48HO=60W T12 (48”) HO
48HO=44W T8 (48”) HO
96=60/75W T12 (72”) SL
96=59W T8 (96”) SL
96HO=95/110W T12 (96”) HO
96HO=86W T8 (96”) HO
Lens
DR=Internal Prismatic Lens/15% DR High
Impact Additive (Standard)
DR-100=100% High Impact Additive
LEX=High Impact Clear Polycarbonate
LEXAN Lens/Low Brightness Pattern
Starting Type
LTS=Low Trigger Start (20 Watt only)
(120V only)
HTS=High Trigger Start (20 Watt only)
WL=Wet
Label
Ballast Type (1)
Blank=Standard Magnetic Ballast
(Biax only)
LE3=T12 Magnetic Energy Saving
LEOC8=T8 Magnetic Energy Saving
EB8 = T8 Electronic Instant Start.
Total Harmonic Distortion < 20%
No. of Ballast
1, 2 or 3
EB8 /PLUS= T8 Electronic Instant Start.
High Ballast Factor >1.13. Total
No. of
Harmonic Distortion < 20%
Ballast
1, 2 or 3
ER8 = T8 Electronic Program Rapid Start.
Total Harmonic Distortion < 10%
No. of Ballast
1, 2 or 3
TEB8 =T8 Electronic Instant Start. Total
Harmonic Distortion < 10%
No. of Ballast
1, 2 or 3
EB5 = T5 Biax Electronic Instant Start.
Total Harmonic Distortion < 20%
No. of Ballast
1, 2 or 3
TEB5 =T5 Biax Electronic Instant Start.
Total Harmonic Distortion < 10%
No. of Ballast
1, 2 or 3
EB2 =T12 Electronic Rapid Start.
Options
(See Options
Section)
Packaging
U=Unit Pack
No. of Ballast
1 or 2
DLS=Digital Lighting System Dimming
• Equipped with energy
saving ballasts/complies
with federal energy
efficiency standards
• Reinforced fiberglass
housing
• High Impact acrylic/DR
diffuser material
• Continuous polyurethane
gasketing formed to
housing provides a
seamless seal
• Watertite hubs standard at
each end accepts 1/2"
conduit
• Optional top only hub entry
or combination top and
end hub entry available for
stem mounting
applications
• Die formed galvanized
steel mounting brackets
(Standard)
• Baked white enamel finish
internal channel/high
reflectance
(For complete details on generic or to specify
manufacturer’s ballast see pg 291)
(1)
Voltage
120V=120 Volt
277V=277 Volt
347V=347 Volt
UNV=Universal
Voltage 120-277 (2)
GL=Single Element Fuse
GM=Double Element Fuse
Emergency - for EM installed,
see EM options table (4)
• No holes required for
surface/chain mounting
• Unitized internal/external
brass mounting stud for
structural integrity and
continuity of ground
• U.L. Listed for wet
locations (standard)
• UL/CUL Listed. Suitable for
damp locations.
NOTES: (1) Products also available in non-US voltages and frequencies for international markets. (2) Not available when specifying emergencies, voltage must be specific.
(3) 3-lamp only available for 32W T8 lamps. (4) Not available for 2' units.
For complete product data, reference the Fluorescent Specification binder. Specifications & dimensions subject to change without notice. Consult your Cooper Lighting
Representative for availability and ordering information.
COOPER LIGHTING
287
SURFACE
COOPER LIGHTING - METALUX®
W SERIES
2', 4' or 8' Surface
2, 3 or 4 Lamps
DESCRIPTION
DIMENSIONS
The W Series wraparound
features economy and energy
efficient performance. The
luminaire’s characteristic clean,
low profile design is both
appealing and practically
functional. The W Series utilizes
a clear, low brightness, extruded
acrylic refractor and a heavy
gauge steel end plate with
embossed light seal for
dependable performance and
good looks. The efficient and
economical W Series is the
perfect wraparound for
commercial spaces, schools,
dormitories, offices and retail
areas.
LAMPS
A
B
C
D
2 Lamp
3/4 Lamp
8-1/2" (216mm)
14" (356mm)
2-5/8" (67mm)
2-5/8" (67mm)
8-1/4" (210mm)
13-3/4" (349mm)
7-1/4" (184mm)
12-3/4" (324mm)
S U R F A C E W R A PA R O U N D
COMMERCIAL GRADE
O R D E R I N G I N F O R M AT I O N
• Equipped with energy
saving ballasts/complies
with federal energy
efficiency standards
• Low profile
• Low brightness/extruded
acrylic refractor
• Heavy gauge end plates
with embossed light seal
• Baked white enamel finish
SAMPLE NUMBER: W-232A-120V-EB81-U
Tandem
Blank=4' Length
8T=8' Length
W=Series
Width
Blank=Standard
A=Wide Body for 2 Lamps
Number of Lamps
2, 3 or 4 lamps
(Not Included)
• Lift and shift refractor for
ease of re-lamping
• Surface or stem mounting,
single or continuous
row (3) (4) (5)
• Also available in tandem 8'
lengths
• UL/CUL Listed. Suitable for
damp locations.
Wattage (Length)
20=20W T12 (24")
17=17W T8 (24")
40=40W T12(48")
32=32W T8 (48")
Lens
A=Acrylic Refractor/Lens
Voltage (1)
120V=120 Volt
277V=277 Volt
347V=347 Volt
UNV=Universal
Voltage 120-277 (2)
Options
GL=Single Element
Fuse
GM=Double
Element Fuse
Emergency - for EM
installed, see EM
options table (6)
Options
(1)
(See Options
Section)
Packaging
U=Unit Pack
Ballast Type
Blank=Standard Magnetic Ballast
(20W only)
LE3=T12 Magnetic Energy Saving
EB8 = T8 Electronic Instant Start.
Total Harmonic Distortion < 10%
No. of Ballast
1, 2 or 3
EB8 /PLUS= T8 Electronic Instant Start.
High Ballast Factor >1.13. Total
No. of
Harmonic Distortion < 20%
Ballast
1, 2 or 3
ER8 = T8 Electronic Program Rapid Start.
Total Harmonic Distortion < 10%
No. of Ballast
1, 2 or 3
EB2 =T12 Electronic Rapid Start.
No. of Ballast
1 or 2
(For complete details on generic or to specify
manufacturer’s ballast see pg. 469)
STarting Type
LTS=Low Trigger Start
(20 Watt only)
(120V only)
HTS=High Trigger
Start (20 Watt only)
NOTES: (1) Products also available in non-US voltages and frequencies for international markets. (2) Not available when specifying emergencies, voltage must be specific.
(3)
Stem mounting not available on 3-lamp fixtures. (4) 2 point suspension recommended for 2 and 4-lamp fixtures. (5) Steel endplates with 7/8" KO standard for continuous
row mounting. (6) Non available for 2' version.
422
COOPER LIGHTING
For complete product data, reference the Fluorescent Specification binder. Specifications & dimensions subject to change without notice. Consult your Cooper Lighting
Representative for availability and ordering information.
DIMENSIONS
LAMPS
2 Lamp
DESCRIPTION
A
7-1/2" (191mm)
The WE Economy Wraparound
features value and energy
efficient performance. The
luminaire’s characteristic clean,
low profile design is appealing
and functional. The WE utilizes a
clear, low brightness, extruded
acrylic refractor and injection
molded end caps for dependable
performance and good looks.
The efficient and economical
WE wrap has been designed as
an economical choice for value
engineered applications. It is
an ideal choice for most any
wraparound situation including
schools, retail, file and copy
areas and storage spaces.
B
2-5/8" (67mm)
SURFACE
COOPER LIGHTING - METALUX®
WE SERIES
4' Surface
2 Lamps
S U R FA C E C O M M E R C I A L
G R A D E W R A PA R O U N D
O R D E R I N G I N F O R M AT I O N
SAMPLE NUMBER: WE-232A-120V-EB81-U
Series
WE= Series
Number
of Lamps
2=2 Lamps
(Not Included)
Wattage (Length)
40=40W T12 (48")
32=32W T8 (48")
A=Acrylic Refractor/Lens
Voltage (1)
120V=120 Volt
277V=277 Volt
347V=347 Volt
UNV=Universal Voltage 120-277 (2)
Options
GL=Single Element Fuse
GM=Double Element Fuse
Emergency - for EM installed, see EM options table
Options
Ballast Type (1)
(See Options
LE3=T12 Magnetic Energy Saving
Section)
EB8 = T8 Electronic Instant Start.
Total Harmonic Distortion < 10%
No. of Ballast
1, 2 or 3
EB8 /PLUS= T8 Electronic Instant Start.
High Ballast Factor >1.13. Total
No. of
Harmonic Distortion < 20%
Ballast
1, 2 or 3
ER8 = T8 Electronic Program Rapid Start.
Total Harmonic Distortion < 10%
No. of Ballast
1, 2 or 3
EB2 =T12 Electronic Rapid Start.
Packaging
U=Unit Pack
No. of Ballast
1 or 2
(For complete details on generic or to specify
manufacturer’s ballast see pg. 469)
• Equipped with energy
saving ballasts/complies
with federal energy
efficiency standards
• Low profile
• Low brightness extruded
acrylic refractor
• Full decorative injection
molded end caps
• Lens retained by end caps
• Stem or surface mounting
(not for continuous row
mounting) (3) (4)
• Baked white enamel finish
• UL/CUL Listed. Suitable for
damp locations.
LENS RETENTION
Lens is mechanically retained by end caps.
(Not Recommended For Sloped Ceiling Applications.)
NOTES: (1) Products also available in non-US voltages and frequencies for international markets. (2) Not available when specifying emergencies, voltage must be specific.
(3) 2 point suspension recommended. (4) Not for continuous row mounting.
For complete product data, reference the Fluorescent Specification binder. Specifications & dimensions subject to change without notice. Consult your Cooper Lighting
Representative for availability and ordering information.
COOPER LIGHTING
423
C AT A L O G # :
S P E C I F I C AT I O N F E AT U R E S
The WPX Series is an energy
efficient industrial Vaportite
fixture that features rugged
and durable construction.
This Vaportite series is suitable for interior and exterior
applications and can be surface or suspension mounted.
Construction
Moisture, acid and corrosion
resistant thermo compressed
glass reinforced polyester.
A P P L I C AT I O N
The WPX Series has been
designed for maximum
operation in commercial,
institutional and industrial
environments where weathering, high temperature,
humidity and dust or
corrosive fumes are present.
Electrical
Luminaries offer CE, BS, VDE
or other European label
sockets and switch start
magnetic or high frequency
electronic ballasts. HPF
available as an option on
switch start ballasts. All
ballasts are Class H insulated.
Available in 1x18w, 2x18w,
1x36w, 2x36w, 1x54, 2x54,
1x58w and 2x58w. All wires
are heat resistant to 105C.
Gasketing
Non-aging, single piece
polyurethane/neoprene
gasket combined with tight
locking clips ensure IP65
rating.
WPX
®
DESCRIPTION
Shielding (Diffuser)
UV non-aging PMMA using a
computer designed pattern
for optimum light
distribution. Hinged clips
hold the diffuser in the open
position allowing for easier
maintenance.
Mounting
Fixture can be surface or
pendant mounted. Mounting
clips are adjustable for
maximum versatility. Clips do
not penetrate the housing,
which ensures the integrity of
the enclosed housing is
maintained.
118
136
158
218
236
258
154
254
Certifications
IP65
2’, 4’, 6’ INDUSTRIAL
1 OR 2 LAMPS
DIMENSIONS
I N D U S T R I A L / VA P O R T I T E
Lamps
1 X 18 W
Dimensions (mm)
L
Lf
660
500
W
86
H
90
2 X 18 W
660
500
136
90
1 X 36 W
1270
1050
86
90
2 X 36 W
1270
1050
136
90
1 X 58 W
1570
1350
86
90
2 X 58 W
1570
1350
136
90
1 X 54 W
1210
680
60
74
2 X 54 W
1210
680
100
74
All dimensions in mm.
COOPER LIGHTING
AIS060343
COOPER LIGHTING — METALUX
TYPE:
COOPER LIGHTING — METALUX
®
WPX
PHOTOMETRICS
Room Index
Ceiling
Reflection Factors
8
7
7
5
5
Wall
5
5
3
5
3
3
Work
3
1
3
3
3
1
Room Index
0.60
Utilization Factors
30
27
22
27
21
21
0.80
37
33
28
33
27
26
1.00
43
38
34
38
32
31
1.25
49
43
39
43
37
35
1.50
53
47
44
47
41
39
2.00
60
52
51
53
47
45
2.50
65
56
56
57
52
49
3.00
69
59
60
60
56
52
4.00
74
62
66
64
60
56
5.00
77
65
69
67
64
58
5
O R D E R I N G I N F O R M AT I O N
PRM
PRM=Export
Pack
Product Family
WPX=Industrial/
Vaportite
Number
of Lamps
1 Lamp
2 Lamps
(Not included)
Wattage (Length)
18=18W (600mm nominal)
36=36W (1200mm nominal)
54=54W (1200mm nominal)
58=58W (1500mm nominal)
Lens Options
PL=Polycarbonate
Lens
Packaging
U=Unit
Pack
Voltage
Ballast Type
220V-240V50Hz
Blank=Less
220V-240V/60Hz
Ballast
220V-240V=220V-240V SW=Switch
50/60Hz
Start
XXX=Less Ballast
Magnetic
Ballast
HF=High
Frequency
Electronic
Ballast
Options
HPF=Available for
Switch Start
Ballast
Blank=With Sockets
and Wires
LS=Less Sockets
and Wires
(Less Ballast
Version)
W P X S H I P P I N G I N F O R M AT I O N
Carton Dimensions (mm)
Product Versions
L
W
H
1x18w (Qty 1)
664
88
92
1x18w (Qty 12)
685
390
310
2x18w (Qty 1)
664
138
92
2x18w (Qty 9)
685
450
310
1x36w (Qty 1)
1274
88
92
1x36w (Qty 9)
1295
300
310
2x36w(Qty 1)
1274
138
92
2x36w(Qty 6)
1295
450
210
1x58w (Qty 1)
1574
88
92
1x58w (Qty 9)
1595
300
310
2x58w (Qty 1)
1574
138
92
2x58w (Qty 6)
1595
450
210
1x54w (Qty 1)
1214
66
78
1x54w (Qty 12)
1230
225
340
2x54w (Qty 1)
1214
106
78
2x54w (Qty 8)
1230
235
340
*L/B=Less Ballast, W/B=With Ballast
C O N T A I N E R L O A D I N G I N F O R M AT I O N
Wt L/B*
kg
0.94
12.14
1.40
13.52
1.81
18.21
2.48
16.68
2.17
21.46
3.10
20.77
1.32
17.10
1.63
14.5
lb
2.07
26.76
3.09
29.81
3.99
40.15
5.47
36.77
4.78
47.31
6.83
45.79
2.91
37.30
3.59
31.97
Wt W/B*
kg
lb
1.49
3.28
18.74
41.31
1.96
4.32
18.56
40.92
2.37
5.22
23.25
51.26
3.60
7.94
23.4
51.59
3.00
6.61
29.00
63.93
4.77
10.52
30.83
67.97
1.49
3.28
19.10
42.11
1.82
4.01
15.97
35.21
Product Version
1x18w
2x18w
1x36w
2x36w
1x58w
2x58w
1x54w
2x54w
No Master Carton
20’
40’
5370pcs
10740pcs
3440pcs
6880pcs
2816pcs
5631pcs
1790pcs
3580pcs
2283pcs
4567pcs
1450pcs
2900pcs
4677pcs
9355pcs
2900pcs
5800pcs
40’HC
12592pcs
8066pcs
6602pcs
4197pcs
5354pcs
3400pcs
10968pcs
6800pcs
Product Version
With Master Carton
20’
40’
40’HC
1x18w
2x18w
1x36w
2x36w
1x58w
2x58w
1x54w
2x54w
4044pcs
2628pcs
2097pcs
1380pcs
1701pcs
1110pcs
3576pcs
2288pcs
9828pcs
6372pcs
5094pcs
3342pcs
4131pcs
2700pcs
8676pcs
5552pcs
8388pcs
5436pcs
4347pcs
2850pcs
3528pcs
2304pcs
7404pcs
4736pcs
NOTE: Specifications and dimensions subject to change without notice.
Visit our web site at www.cooperlighting.com
Customer First Center 1121 Highway 74 South Peachtree City, GA 30269 770.486.4800 FAX 770.486.4801
AIS060343
®
C AT A L O G # :
DESCRIPTION
S P E C I F I C AT I O N F E AT U R E S
The HBM is the optimum
choice in high bay lighting
systems with a mounting
height of not less than 5 m.
Excellently suited for industrial areas, stores and sport
halls.
- Prewired lamp gear (ballast,
ignitor, capacitor and lamp
holder) is available on an
individual white painted
steel sheet gear tray.
S P E C I F I C AT I O N F E AT U R E S
Gear Housing (IP65)
- Sturdy high pressure die
cast aluminum housing,
consisting of two pieces
totally sealed by silicon
rubber gasket and fastened
by stainless steel screws
(IP65).
- Gear housing is painted
with epoxy powder in a
black matt finish. Its outside
surface is molded with a
symmetrical arrangement
of air-cooling fins to accelerate ballast heat
dissipation.
Diffuser
- 4mm tempered circular
glass diffuser withstands
high temperature generated
by lamp.
- Gear tray is mounted in the
lower half of gear compartment for fast and easy
maintenance.
- The diffuser is totally
enclosed to the reflector by
rubber gasket and 3
extruded aluminum clips to
ensure protection against
dust and water jet ingress
(IP65).
- Gear housing has 2 safety
chains to facilitate
maintenance operation at
luminaire mounting height.
- For cable entry, the
compartment is equipped
with (PG13.5) cable gland.
- The diffuser can be suspended by a small chain to
make lamp maintenance
easy and fast.
Lamp Compartment (IP65)
. Installation
Reflector
- The luminaire is suspended
using a suspension chain,
22cm length.
- The anodized spun
aluminum narrow or wide
beam reflector is fastened
to the gear compartment by
screws.
HBM
HIGH BAY
1 5 0 - 4 0 0 W
Metal Halide
H I G H B AY
INDUSTRIAL LUMINAIRE
Suspension Chain
Hook
Cable Gland
Upper Gear
Housing
Safety Chain
Gear Tray
Lower Gear
Housing
Reflector
Glass
Difuser
Clip
DIMENSIONS
NARROW BEAM ALUMINUM REFLECTOR
WIDE BEAM ALUMINUM REFLECTOR
265mm
230mm
560mm
T E C H N I C A L D AT A
500mm
COOPER LIGHTING
330mm
300mm
530mm
230mm
265mm
IP65
420mm
AIS051519
COOPER LIGHTING — LUMARK
TYPE:
PHOTOMETRICS
HB-ME 250W, Wide beam
HB-ME 400W, Narrow beam
Intensity Distribution
Intensity Distribution
500 cd/
1000lm
500 cd/
1000lm
Utilization Factors
REFL.
80
C
50
30
80
C
50
W
50
30
10
50
30
10
39
0.6
51
45
41
49
44
40
51
47
0.8
60
54
49
57
52
49
58
54
1.0
66
60
56
63
59
55
73
69
65
1.5
77
72
67
73
68
65
74
78
74
71
2.0
83
78
74
77
74
71
87
83
84
81
78
3.0
90
86
83
83
80
78
96
93
90
88
86
84
4.0
95
92
89
87
85
83
99
96
94
90
89
87
5.0
97
94
92
89
87
85
W
50
30
10
50
30
10
0.6
49
43
39
48
42
0.8
59
53
48
56
1.0
66
60
55
63
1.5
78
72
67
2.0
84
79
3.0
91
4.0
5.0
ROOM INDEX .K
REFL.
Utilization Factors
F
30
F
ROOM INDEX .K
COOPER LIGHTING — LUMARK
®
H B M H I G H B AY
O R D E R I N G I N F O R M AT I O N
Catalog
Number
Narrow Beam aluminum reflector
Lamp
Type
Lamp
Wattage
Ballast Type/
Power Factor
Voltage
Base
Shipping Volume/Net Weight
Assembled
Shipping Volume/Net Weight
Disassembled
PRM-MHHBM-50-250F-220V/50Hz
MH
250W
Reactor/HPF
220V/50Hz
E40
51x51x62cm/11kg - 1/ctn
Housing 28x28xx29cm/6.25kg - 1/ctn
PRM-MHHBM-50-400F-220V/50Hz
MH
400W
Reactor/HPF
220V/50Hz
E40
51x51x62cm/11kg - 1/ctn
Reflector 51x51x62cm/11kg - 15/ctn
PRM-MHHBM-50-400F-XXX
MH
400W
N/A
N/A
E40
51x51x62cm/8kg - 1/ctn
Housing 28x28xx29cm/3kg - 1/ctn
Reflector 51x51x62cm/11kg - 15/ctn
Wide Beam aluminum reflector
PRM-MHHBM-42-250F-220V/50Hz
MH
400W
Reactor/HPF
220V/50Hz
E40
44x44x65cm/10kg - 1/ctn
PRM-MHHBM-42-400F-220V/50Hz
MH
400W
Reactor/HPF
220V/50Hz
E40
44x44x65cm/10kg - 1/ctn
Housing 28x28xx29cm/6.25kg - 1/ctn
Reflector 44x44x65cm/9kg - 7/ctn
PRM-MHHBM-42-400F-XXX
MH
400W
N/A
N/A
E40
44x44x65cm/7.5kg - 1/ctn
Housing 28x28xx29cm/3kg - 1/ctn
Reflector 44x44x65cm/9kg - 7/ctn
C O N T A I N E R L O A D I N G I N F O R M AT I O N
20’
40’
40’HC
Narrow Beam aluminum reflector
Assembled
132
276
368
Disassembled
600
1300
1500
Wide Beam aluminum reflector
Assembled
195
405
540
Disassembled
600
1300
1500
NOTE: Specifications and dimensions subject to change without notice.
Visit our web site at www.cooperlighting.com
Customer First Center 1121 Highway 74 South Peachtree City, GA 30269 770.486.4800 FAX 770.486.4801
AIS051519
DIMENSIONS
DESCRIPTION
The E&G Steeler utilizes the
SA18 reflector system for
maximum performance.
It features a die-cast aluminum
neck for superior strength and
an extruded aluminum hinged
door frame with stainless steel
latches for access to the lamp
without tools. The E&G is fully
enclosed and gasketed at three
separate points to prevent
entry of external contaminants.
U.L. listed and labeled for
damp location. CSA Certified.
28 1/4"
[718mm]
max. height
INDUSTRIAL
COOPER LIGHTING - LUMARK®
SE18" E&G
STEELER
18"
[457mm]
1 7 5 - 4 5 0 W
High Pressure Sodium
Pulse Start Metal Halide
Metal Halide
ENCLOSED & GASKETED
H I G H - B AY
INDUSTRIAL LUMINAIRE
O R D E R I N G I N F O R M AT I O N
S A M P L E N U M B E R : H P S E - E N S A 1 8 - M - 4 0 0 - M T- Q
Lamp Type
Series
Reflector Type
HP=High
ENSA=Enclosed
SE=E&G
Pressure
&
Steeler
Sodium 1
Gasketed
MH=Metal Halide 2
Spun
2, 3
MP=Pulse Start MH (CWA)
Aluminum
2, 3, 4
ML=Pulse Start MH (Linear Reactor)
Reflector
Diameter
18=18"
Socket Position/
Distribution 5
C=Concentrated
M=Medium
W=Wide
Lamp
Wattage
175=175W
200=200W
250=250W
320=320W
350=350W
400=400W
450=450W
Voltage 6
Options &
120V
Accessories
208V
(See Below)
240V
277V
347V
480V
MT=Multi-Tap 7
TT=Triple-Tap 8
5T=5-Tap 9
Options (add as suffix) 10
See page 368-369 for Options Capability Matrix.
Accessories (order separately)
FH-1=Fixture Hook
FL-1=Fixture Loop
SHK=Hook with Safety Screw
PC3-XXXV=3' Cord with NEMA Plug—(120V-L5-15P, 208V-L6-15P, 240V-L6-15P, 347V-L37-20P, AND 480V-L8-20P) Other cord lengths are
available by specifying length (PC6 for 6’ cord). Requires FH-1 or FL-1
PHC-XXXV=Power Cord and Plug—18" Power Cord and Non-NEMA plug configuration. Must be used with FL-1 and TPPH
(Thru-Way Pendant Power Hook). Must Specify Single Voltage
PHC-XXXV-NEMA=Power Cord and NEMA Plug—18" Power Cord and 20 Amp NEMA plug configuration. Must be used with FL-1 and
TPPH-NEMA (Thru-Way Pendant Power Hook)
TPPH-XXXV-NEMA=Thru-way Pendant Power Hook. Requires FL-1 and PHC-XXXV-NEMA. Specify Voltage
TPPH-XXXV=Thru-Way Pendant Power Hook Requires FL-1 and PHC. Specify Voltage
TPPH-F-XXXV=Thru-Way Pendant Power Hook–Single Fuse, 120, 277 or 347 Volt. Requires FL-1 and PHC. Specify Voltage
TPPH-F2-XXXV=Thru-Way Pendant Power Hook–Double Fused, 208, 240 or 480 Volt. Requires FL-1 and PHC. Specify Voltage
TPPH-F-QD-XXXV=Thru-Way Pendant Power Hook–Single Fuse, Quick Disconnect. Requires FL-1 and PHC. Specify Voltage
TPPH-F2-QD-XXXV=Thru-Way Pendant Power Hook–Double Fused, Quick Disconnect. Requires FL-1 and PHC. Specify Voltage
TWMBS=Thru-way Mounting Box 11
C3=3' Cord-No Plug-Requires FH-1 or FL-1
MBT=Twin Mount Bracket (Fixtures must be same voltage and without hooks, loops or plugs)
• Easy slide-on die-cast
aluminum mounting box
with tapped opening for
3/4" conduit
• Heavy-duty, formed steel
housing with an open air
ballast for cooler
operation is finished in
a white polyester powder
coat
• High power factor ballast
with class H insulation.
Minimum starting
temperature is -40°C
(-40°F) for HPS and -30°C
(-20°F) for MH, MP and
ML. U.L. listed and CSA
certified
• 65° C ambient
temperature environment.
55° C ambient
temperature environment
(450W and above)
• Die-cast aluminum neck
with staggered mounting
bosses for eight-position
adjustability of the socket
which provides a variety
of distributions from
concentrated to wide
• Faceted SA18 reflector
system is completely
enclosed and gasketed at
three points: door to
reflector, reflector to neck,
and neck to housing
• Clear tempered glass lens
in an extruded aluminum
hinged door frame with
stainless steel latches
NOTES: 1 Not available in 175, 200, 320, 350 and 450W. 2 Approved lamp containment barrier required when enclosed rated MP/ML/MH lamps are used. 3 175, 200,
250, 320, 350 and 400W only. 4 277V only, not available with Q, EM, HL or HC option. 5 Factory set for concentrated, medium or wide distributions otherwise
fixture is shipped in medium setting. 6 Products also available in non-US voltages & 50HZ for international markets. 7 Multi-tap ballast 120/208/240/277V wired
277V. 8 Triple-tap ballast 120/277/347V wired 347V. 9 5-tap ballast 120/208/240/277/480V wired 277V. 400W MH only. 10 Must be listed in the order shown and
seperated by a dash. 11 Specify L/TCB option when using Thru-way mounting box (TWMBS) accessory.
• Approximate net weight:
38 lbs. (17 kgs.)
COOPER LIGHTING
331
INDUSTRIAL
COOPER LIGHTING - LUMARK®
DIMENSIONS
DESCRIPTION
The Steeler combines
computerized design, durable
cold-rolled steel and a
field-adjustable reflector to
provide a degree of versatility
unmatched in other industrials.
U.L. listed and labeled for
damp location. CSA Certified.
Maximum height is
24 1/8" [613mm].
See ordering
information for
details
15" [381mm]
SS15" STEELER
O R D E R I N G I N F O R M AT I O N
7 0 - 4 5 0 W
High Pressure Sodium
Pulse Start Metal Halide
Metal Halide
H I G H - B AY
INDUSTRIAL LUMINAIRE
S A M P L E N U M B E R : H P S S - S A 1 5 - M - 1 5 0 - M T- Q
Lamp Type
Series
Reflector Type
HP=High
SS=Steeler SA=Anodized
Pressure
Spun
Sodium 1
Aluminum
MH=Metal Halide 2
MP=Pulse Start MH (CWA) 2, 3
ML=Pulse Start MH (Linear Reactor) 2, 3, 4
Reflector
Diameter
15=15"
Socket Position/
Distribution 5
C=Concentrated
M=Medium
W=Wide
STOCK SAMPLE NUMBER: MHSS40-5T
• Easy slide-on die-cast
aluminum mounting box
with tapped opening for
3/4" conduit
• Heavy-duty, formed steel
housing with an open air
ballast for cooler
operation is finished in
a white polyester powder
coat
• High power factor ballast
with class H insulation.
Minimum starting
temperature is -40°C
(-40° F) for HPS and -30°C
(-20° F) for MH, MP and
ML. U.L. listed and CSA
certified
• 65° C ambient
temperature environment
• Universal ladder brackets
allow for the flexibility to
change out with other
reflectors available in
acrylic or glass
• Mogul-base porcelain
socket. 150W MH and
below is medium-base
• Computer-designed,
field-adjustable reflector
mounts easily and allows
multiple distribution
patterns for precise
control
Lamp Type
Series
HP=High
SS=Steeler
Pressure
Sodium
MH=Metal
Halide
MP=Pulse Start
Metal
Halide
(CWA)
Lamp
Wattage
70=70W
100=100W
150=150W
175=175W
200=200W
250=250W
300=300W
320=320W
350=350W
400=400W
450=450W
Voltage 6
Options &
120V
Accessories
208V
(See Below)
240V
277V
347V
480V
MT=Multi-Tap 7
TT=Triple-Tap 8
5T=5-Tap 9
Options
Lamp Wattage
5T=5-Tap
40=400W
Ballast
40Q=400W
and Quartz Restrike
408=400W
(Canada, Triple-Tap Ballast)
NOTES: Options not available with stock products. Order Accessories as separate items for field installation.
Refer to standard ordering information to add options and accessories.
Options (add as suffix) 10
See page 368-369 for Options Capability Matrix.
Accessories (order separately)
FH-1=Fixture Hook
FL-1=Fixture Loop
SHK=Hook with Safety Screw
PC3-XXXV=3' Cord with NEMA Plug—(120V-L5-15P, 208V-L6-15P, 240V-L6-15P, 347V-L37-20P, AND 480V-L8-20P) Other cord lengths are
available by specifying length (PC6 for 6’ cord). Requires FH-1 or FL-1
PHC-XXXV=Power Cord and Plug—18" Power Cord and Non-NEMA plug configuration. Must be used with FL-1 and TPPH (Thru-Way
Pendant Power Hook). Must Specify Single Voltage
PHC-XXXV-NEMA=Power Cord and NEMA Plug—18" Power Cord and 20 Amp NEMA plug configuration. Must be used with FL-1 and
TPPH-NEMA (Thru-Way Pendant Power Hook)
TPPH-XXXV-NEMA=Thru-way Pendant Power Hook. Requires FL-1 and PHC-XXXV-NEMA. Specify Voltage
TPPH-XXXV=Thru-Way Pendant Power Hook Requires FL-1 and PHC. Specify Voltage
TPPH-F-XXXV=Thru-Way Pendant Power Hook–Single Fuse, 120, 277 or 347 Volt. Requires FL-1 and PHC. Specify Voltage
TPPH-F2-XXXV=Thru-Way Pendant Power Hook–Double Fused, 208, 240 or 480 Volt. Requires FL-1 and PHC. Specify Voltage
TPPH-F-QD-XXXV=Thru-Way Pendant Power Hook–Single Fuse, Quick Disconnect. Requires FL-1 and PHC. Specify Voltage
TPPH-F2-QD-XXXV=Thru-Way Pendant Power Hook–Double Fused, Quick Disconnect. Requires FL-1 and PHC. Specify Voltage
TWMBS=Thru-way Mounting Box 11
WG15=Wire Guard (not compatible with “SGB15”)
WG15/GLC=Gym Wire Guard w/ Safety Glass
C3=3' Cord–No Plug–Requires FH-1 or FL-1
MBT=Twin Mount Bracket (Fixtures must be same voltage and without hooks, loops or plugs)
SGB15=Safety Glass Bottom (not compatible with “WG15”) 1
• Approximate net weight:
30 lbs. (13 kgs.)
328
COOPER LIGHTING
NOTES: 1 Not available in 175, 200, 320, 350 and 450W. 2 Approved lamp containment barrier required when enclosed rated MP/ML/MH lamps are used. 3 175, 200, 250,
320, 350, 400 & 450W only. 4 277V only, not available with Q, EM, HL or HC option. 5 Factory set for concentrated, medium or wide distributions otherwise
fixture is shipped in medium setting. 6 Products also available in non-US voltages & 50HZ for international markets. 7 Multi-tap ballast 120/208/240/277V wired
277V. 8 Triple-tap ballast 120/277/347V wired 347V. 9 5-tap ballast 120/208/240/277/480V wired 277V. 400W MH only. 10 Must be listed in the order shown and
seperated by a dash. 11 Specify L/TCB option when using Thru-way mounting box (TWMBS) accessory.
DIMENSIONS
DESCRIPTION
The Steeler combines
computerized design, durable
cold-rolled steel and a
field-adjustable reflector to
provide a degree of versatility
unmatched in other industrials.
U.L. listed and labeled for
damp location. CSA Certified.
Maximum height is
26 7/8" (683mm)
INDUSTRIAL
COOPER LIGHTING - LUMARK®
SS18" STEELER
18" (487mm)
1 7 5 W - 4 5 0 W
High Pressure Sodium
Pulse Start Metal Halide
Metal Halide
H I G H - B AY
INDUSTRIAL LUMINAIRE
O R D E R I N G I N F O R M AT I O N
S A M P L E N U M B E R : H P S S - S A 1 8 - M - 1 5 0 - M T- Q
Lamp Type
Series
Reflector Type
Reflector
HP=High
SA=Anodized
Diameter
SS=Steeler
Pressure
Spun
18=18"
1
Sodium
Aluminum
MH=Metal Halide 2
DLS18=100% Downlight
MP=Pulse Start MH (CWA) 2, 3
Spun Aluminum 2
ML=Pulse Start MH (Linear Reactor) 2, 3, 4
Socket Position/
Distribution 5
C=Concentrated
M=Medium
W=Wide
Lamp
Wattage
175=175W
200=200W
250=250W
320=320W
350=350W
400=400W
450=450W
Voltage 6
Options &
120V
Accessories
208V
(See Below)
240V
277V
347V
480V
MT=Multi-Tap 7
TT=Triple-Tap 8
5T=5-Tap 9
Options (add as suffix) 10
See page 368-369 for Options Capability Matrix.
Accessories (order separately)
FH-1=Fixture Hook
FL-1=Fixture Loop
SHK=Hook with Safety Screw
PC3-XXXV=3' Cord with NEMA Plug—(120V-L5-15P, 208V-L6-15P, 240V-L6-15P, 347V-L37-20P, AND 480V-L8-20P) Other cord lengths are
available by specifying length (PC6 for 6’ cord). Requires FH-1 or FL-1
PHC-XXXV=Power Cord and Plug—18" Power Cord and Non-NEMA plug configuration. Must be used with FL-1 and TPPH
(Thru-Way Pendant Power Hook). Must Specify Single Voltage
PHC-XXXV-NEMA=Power Cord and NEMA Plug—18" Power Cord and 20 Amp NEMA plug configuration. Must be used with FL-1 and
TPPH-NEMA (Thru-Way Pendant Power Hook)
TPPH-XXXV-NEMA=Thru-way Pendant Power Hook. Requires FL-1 and PHC-XXXV-NEMA. Specify Voltage
TPPH-XXXV=Thru-Way Pendant Power Hook Requires FL-1 and PHC. Specify Voltage
TPPH-F-XXXV=Thru-Way Pendant Power Hook–Single Fuse, 120, 277 or 347 Volt. Requires FL-1 and PHC. Specify Voltage
TPPH-F2-XXXV=Thru-Way Pendant Power Hook–Double Fused, 208, 240 or 480 Volt. Requires FL-1 and PHC. Specify Voltage
TPPH-F-QD-XXXV=Thru-Way Pendant Power Hook–Single Fuse, Quick Disconnect. Requires FL-1 and PHC. Specify Voltage
TPPH-F2-QD-XXXV=Thru-Way Pendant Power Hook–Double Fused, Quick Disconnect. Requires FL-1 and PHC. Specify Voltage
TWMBS=Thru-way Mounting Box 11
WG18=Wire Guard (not compatible with “SGB18”)
WG18/GLC=Gym Wire Guard w/ Safety Glass
C3=3' Cord–No Plug–Requires FH-1 or FL-1
MBT=Twin Mount Bracket (Fixtures must be same voltage and without hooks, loops or plugs)
SGB18=Safety Glass Bottom (not compatible with “WG18”) 2
• Easy slide-on die-cast
aluminum mounting box
with tapped opening for
3/4" conduit
• Heavy-duty, formed steel
housing with an open air
ballast for cooler
operation is finished in
a white polyester powder
coat
• High power factor ballast
with class H insulation.
Minimum starting
temperature is -40°C
(-40° F) for HPS and -30°C
(-20° F) for MH, MP and
ML. U.L. listed and CSA
certified
• 65° C ambient
temperature environment
• Universal ladder brackets
allow for the flexibility to
change out with other
reflectors available in
acrylic or glass
• Mogul-base porcelain
socket
• Computer-designed,
field-adjustable reflector
mounts easily and allows
multiple distribution
patterns for precise
control
• Approximate net weight:
30 lbs. (13 kgs.)
NOTES: 1 Not available in 175, 200, 320, 350 and 450W. 2 Approved lamp containment barrier required when enclosed rated MP/ML/MH lamps are used. 3 175, 200, 250,
320, 350, 400 & 450W only. 4 277V only, not available with Q, EM, HL or HC option. 5 Factory set for concentrated, medium or wide distributions otherwise
fixture is shipped in medium setting. 6 Products also available in non-US voltages & 50HZ for international markets. 7 Multi-tap ballast 120/208/240/277V wired
277V. 8 Triple-tap ballast 120/277/347V wired 347V. 9 5-tap ballast 120/208/240/277/480V wired 277V. 400W MH only. 10 Must be listed in the order shown and
seperated by a dash. 11 Specify L/TCB option when using Thru-way mounting box (TWMBS) accessory.
COOPER LIGHTING
329
INDUSTRIAL
COOPER LIGHTING - LUMARK®
DIMENSIONS
DESCRIPTION
The Steeler combines
computerized design, durable
cold-rolled steel and a
field-adjustable reflector to
provide a degree of versatility
unmatched in other industrials.
U.L. listed and labeled for
damp location. CSA Certified.
SS
STEELER
15", 18" & 23"
Maximum Height is
15"=24 1/8" [613mm]
18"=26 7/8" [683mm]
23"=31 3/4" [806mm]
See ordering information
for details
The Steeler is perfect for
high-bay applications such
as gymnasiums, hangars,
manufacturing, assembly
and auto service areas.
15" [381mm]
18" [487mm]
23" [584mm]
7 0 - 1 0 0 W
High Pressure Sodium
Pulse Start Metal Halide
Metal Halide
O R D E R I N G I N F O R M AT I O N
S A M P L E N U M B E R : M P S S - S A 1 8 - M - 3 2 0 - M T- O R
H I G H - B AY I N D U S T R I A L
LUMINAIRE
• Easy slide-on die-cast
aluminum mounting box
with tapped opening for
3/4" conduit
• Heavy-duty, formed steel
housing with an open air
ballast for cooler
operation is finished in a
standard white polyester
powder paint
• High power factor ballast
with class H insulation.
Minimum starting
temperature is -40°C
(-40° F) for HPS and -30°C
(-20° F) for MH, MP and
ML. U.L. listed and CSA
certified
• Universal ladder brackets
allow for the flexibility to
change out with other
reflectors available in
acrylic or glass
Lamp Type
Series
Reflector Type
HP=High
SS=Steeler
SA=Anodized
Pressure
Spun
Sodium 1
Aluminum
2
MH=Metal Halide
MP=Pulse Start MH (CWA) 2
ML=Pulse Start MH (Linear Reactor) 2, 3, 4
Reflector
Diameter
15=15"
18=18"
23=23"
Socket Position/
Distribution 5
C=Concentrated
M=Medium
W=Wide
STOCK SAMPLE NUMBER: MHSS-40-5T
Lamp Type
Series
HP=High
SS=Steeler
Pressure
Sodium
MH=Metal
Halide
MP=Pulse Start
Metal
Halide
(CWA)
Lamp
Wattage
70=70W 6
100=100W 6
150=150W 6
175=175W
200=200W
250=250W
300=300W
320=320W
350=350W
400=400W
450=450W
600=600W 6
750=750W
1000=1000W
Voltage 7
Options &
120V
Accessories 11
208V
(See Pages 541-545)
240V
277V
347V
480V
MT=Multi-Tap 8
TT=Triple-Tap 9
5T=5-Tap 10
Options
Lamp Wattage
OR=Open Rated Socket
40=400W
5T=5-Tap Ballast 10
40Q=400W
and Quartz
Restrike
408=400W
(Canada, Triple-Tap Ballast)
NOTES: Options not available with stock products. Order Accessories as separate items for field installation.
Refer to standard ordering information to add options and accessories.
• Mogul-base porcelain
socket
• Computer-designed,
field-adjustable reflector
mounts easily and allows
multiple distribution
patterns for precise
control
• Approximate net weight:
30-37 lbs. (13-17 kgs.)
508
COOPER LIGHTING
Reflector
Type
Lamp
Wattage
SA15
70-450W
SA18
70-450W
SA23
400-1000W
Ambient
Environment
Supply
Wire (Min.)
55°C (450W + Up)
65°C (70-400W)
90°C
NOTES: 1 Not available in 175, 200, 320, 350, 450 and 750W. 2 Approved lamp containment barrier required when enclosed rated MP/ML/MH lamps are used. 2005 NEC
code requires that open luminaires must utilize a safety glass bottom (SGB) accessory or an Open rated socket (OR) and lamp. 3 200, 250, 320, 350, 400W only.
4 277V only, not available with HSW, HL or HC option. 5 Factory set for concentrated, medium or wide distributions only if P (factory pre-set) is in the
nomenclature of the fixture. 6 HPS only. 7 Products also available in non-US voltages and 50HZ for international markets. 8 Multi-tap ballast 120/208/240/277V
wired 277V. 9 Triple-tap ballast 120/277/347V wired 347V. 10 5-tap ballast 120/208/240/277/480V wired 480V. 400W MH only. 11 Add as suffix in the order shown.
12 Specifications and dimensions subject to change without notice.
DIMENSIONS
DESCRIPTION
The Vertimark II delivers
horizontal and vertical
footcandles to evenly illuminate
low mounting areas such
parking garages or storage
facilities areas.
The combination die-cast
reflector/ ballast housing
makes Vertimark II economical.
Modular assembly makes
installation easy and quality
construction ensures years of
consistent performance. U.L.
listed and labeled for damp
location. CSA Certified. Wet
location optional.
Surface
12 1/2"
[318mm]
Pendant
13 1/4"
[337mm]
17" [432mm]
MOUNTING
Powered
INDUSTRIAL
COOPER LIGHTING - LUMARK®
BE
VERTIMARK II
1 0 0 - 2 5 0 W
by
High Pressure Sodium
Pulse Start Metal Halide
technology
2 9/16"
[65mm]
5 1/8"
[130mm]
L O W - B AY
P=Mounting Bracket for
Surface Mounting or
Mounting to 4" J-Box.
Once in place, the EZ123
readily accepts the
mating half of the hinge
and the fixture is
easily attached.
INDUSTRIAL LUMINAIRE
• Standard quick mounting
plate for 3/4" IPS conduit
frees both hands to
complete wiring
O R D E R I N G I N F O R M AT I O N
S A M P L E N U M B E R : H P B E - 5 A - 1 0 0 H - M T- L L
Lamp Type
Series
Lens Type
HP=High
BE=Vertimark II 2A=Type II
Pressure
5A=Type V
Sodium 1
2P=Type II
MH=Metal
Polycarbonate 5
5P=Type V
Halide
Polycarbonate 5
MP=Pulse
Start MH (CWA) 2
MD=Pulse Start Metal Halide (Electronic) 3, 4
Lamp Wattage
100=100W
150=150W
175=175W
200=200W
250=250W
Power Factor
H=HPF
_ =NPF 6
Voltage 7
LL=Lamp
120V
Included
208V 4
4
240V
277V 4
347V
480V 8
MT=Multi-Tap 9
TT=Triple-Tap 10
E=Electronic 4
Options &
Accessories
(See Pages
541-545)
• Die-cast aluminum
housing has durable white
polyester powder coat
finish
11
• Hinged refractor permits
relamping without
removal of refractor
• Acrylic prismatic refractor
controls light for high
vertical and horizontal
footcandles
• Removable ballast
compartment cover
provides easy internal
access
L A M P M O R T A L I T Y A N D L U M E N M A I N T E N A N C E C O M PA R I S O N S
LAMP MORTALITY
LUMEN MAINTENANCE
100
100
90
80
• Optional “P” mounting
bracket fits a standard
4" J-Box or outlet box
for surface mounting
90
70
60
80
50
% Lumens
% Lamp Survival
Metal Halide
40
70
• Approximate net weight:
7 lbs. (8 kgs.)
30
60
20
10
0
50
0
2000
4000
6000
8000
10000
12000
14000
16000
18000
20000
22000
24000
26000
28000
30000
Lamp Life [Hours]
Natural White TM & Uni-Form ® Pulse Start on ECON TECHNOLOGY
Uni-Form ® Pulse Start on CWA
Probe Start Metal Halide on CWA
40
0
2000
4000
6000
90% Mean Lumens Nat-Wt-ECON
Series
Lamp
Wattage
Ambient
Environment
Supply
Wire (Min.)
Vertimark II
100-250W
40°C (100-250W)
40°C (250W ECON)*
90°C
8000
10000
12000
14000
16000
18000
20000
Lamp Life [Hours]
NOTE: Lamp Mortality and Lumen Maintenance Charts Courtesy of VENTURE®
86% Mean Lumens-UPS-ECON
65% Mean Lumens-Probe Start
75% Mean Lumens-UPS CWA
NOTES: * Electronic Pulse Start Metal Halide. (200-277V). 120V 25°C.
NOTES: 1 150W is maximum wattage available in HPS. 2 Pulse Start Metal Halide available on 100, 150, 175, 200, and 250W only. 3 250W only. 4 MD available in 208,
240 or 277V or with “E” option which will operate voltages from 200-277V 50/60 Hz. 5 Not recommended for use with Metal Halide lamps due to to rapid
yellowing typical of polycarbonate material. 6 For 120V NPF Reactor ballast, drop “H” after wattage in catalog number. 7 Products also available in non-US
voltages and 50Hz for international markets. Consult factory for availability and ordering information. 8 480V not available with 200 or 250W Pulse Start Metal
Halide. 9 Multi-Tap ballast is 120/208/240/277V wired 277V. 10 Triple-Tap ballast is 120/277/347V wired 347V. 11 Add as suffix in the order shown.
12 Specifications and dimensions subject to change without notice.
COOPER LIGHTING
521
C AT A L O G # :
DESCRIPTION
S P E C I F I C AT I O N F E AT U R E S
The OVA Low-Profile drop
prismatic roadway luminaire
is ideal for roadways, parking
areas, residential neighborhoods and bridge structures.
Suitable for 3G vibration
conditions. Up to 65% less
glare than typical drop lens
refractor.
A. Lens
Removable borosilicate glass
refractor, heat- and impact
resistant. IP65.
B. Reflector
The optical system is a
hydroformed anodized
aluminum reflector with a
dacron polyester filter. The
bottom of the reflector has
the protrusion design to
protect the bulb.
C. Base & Top Housing
Die cast aluminum base with
stainless steel bail latch. Die
cast aluminum top housing
with integral hinges for
hands free installation,
relamping and maintenance.
Standard grey polyester
powder coat finish.
OVA
E. Ballast Assembly
Ballast mounted on
removable gear tray with
encapsulated starter for
protection from
environmental abuse.
Standard two position tunnel
type compression terminal
block.
F. Mounting
Two-bolt/one bracket
slipfitter with cast-in pipe
stop and leveling steps. 0°,
5°, 10° pitch options. Fixedin-place birdguard seals
around 1 1/4” or 2”
mounting arms
1 5 0 - 6 0 0 W
Metal Halide
High Pressure Sodium
D. Socket
Adjustable mogul-base
porcelain socket.
30
DIMENSIONS
825mm
[32 1/2"]
480mm [18 7/8"]
T E C H N I C A L D AT A
265mm
[10 7/16"]
IP65
P R O D U C T S P E C I F I C AT I O N
Light Source
150-600W; adjustable mogul-base porcelain socket
Voltage and frequency
220V-240V 50/60Hz
Mounting arms
1 1/4” - 2” (31.75mm - 50.8mm)
Suitable high
8m - 13m
COOPER LIGHTING
AIS060524
rev 5/11/07
COOPER LIGHTING — STREETWORKS ™
TYPE:
COOPER LIGHTING — STREETWORKS ™
O VA
O R D E R I N G I N F O R M AT I O N
PRM
OVA
PRM=Export
Pack
Product
Family
OVA
Lamp
Wattage
15=150W
25=250W
40=400W
60=600W
Lamp Type
S=HPS E39(ANSI)
M=MH E39(ANSI)
E=HPS E40(IEC)
F=MH E40(IEC)
Ballast Type
H=Reac./HPF
W=CWA
R=Reac./NPF
X=Less Ballast
Voltage
U=220V/50Hz
4=240V/60Hz
5=230V/60Hz
A=220V/60Hz
B=240V/50Hz
R=230V/50Hz
W=Multi-Tap
120V/208V/
240V/277V
60Hz
X=Less Ballast
Distribution
3=Type III
Cutoff
E=MSCO
Options (add as suffix)
L=Lamp
Blank=Grey
WH=White
BK=Black
BZ=Bronze
4=PER (photo control receptacle)
O V A P R O D U C T I N F O R M AT I O N
Catalog
Number
PRM-OVA60SXX3E
Wattage
600 max.
Type
HPS E39
Voltage/Hz
Less Ballast
Volume (m3)
0.14
Weight (kg)
16.1
PRM-OVA60EHU3E
600
HPS E40
220V/50Hz
0.14
22.1
PRM-OVA40SH43E
400
HPS E39
240V/60Hz
0.14
22.3
PRM-OVA40EHU3E
400
HPS E40
220V/50Hz
0.14
18.8
PRM-OVA25SH43E
250
HPS E39
240V/60Hz
0.14
21.1
PRM-OVA25EHU3E
250
HPS E40
220V/50Hz
0.14
18.3
C O N T A I N E R L O A D I N G I N F O R M AT I O N
20’
168
40’
364
40’HC
416
NOTE: Specifications and dimensions subject to change without notice.
Visit our web site at www.cooperlighting.com
Customer First Center 1121 Highway 74 South Peachtree City, GA 30269 770.486.4800 FAX 770.486.4801
rev 5/11/07 AIS060524
R O A D W AY
OVH FLAT GLASS
50-250W
MH/HPS/MERCURY
R O A D W AY L U M I N A I R E
27 3/32" [688mm]
6 17/32"
[166mm]
12 5/8" [321mm]
STREETWORKS™
HOUSING
Die-cast aluminum housing and
latch. Standard grey polyester
powder coat finish. Other finish
colors available. Consult your
Streetworks Representative.
Optional NEMA twistlock
O R D E R I N G I N F O R M AT I O N
SAMPLE NUMBER: OVH50SR22D4
PRODUCT
FAMILY
OVH
photocontrol receptacle also
available.
SOCKET
Adjustable mogul-base porcelain
socket.
LAMP
WATTAGE
50=50W
70=70W
10=100W
15=150W 1
17=175W
20=200W
25=250W
LAMP TYPE 2
S=High Pressure
Sodium
V=Mercury
M=Metal Halide
BALLAST TYPE 2
C=CWI
H=Reac./HPF
K=10KV CWA 3
M=Mag. Reg.
N=Hi. Reac./NPF
P=Hi. Reac./HPF
R=Reac./NPF
W=CWA
DOOR
Die-cast aluminum door frame with
VOLTAGE 2
2=120V
0=208V
4=240V
7=277V
8=480V
9=347V
F=120/240 wired 120V
P=240 w/PCR wired 120V
W=Multi-Tap wired 120V
N=Multi-Tap wired 277V
V=Multi-Tap wired 240V
DISTRIBUTION
2=Type II
3=Type III
CUTOFF
D=MCO
OPTIONS +
ACCESSORIES
(See Below)
integral hinges for toolless
relamping and maintenance. ANSI
OPTIONS + ACCESSORIES [Must be listed in the order shown and separated by a dash]
wattage/source label.
LENS
Removable tempered flat glass
for use with High Pressure Sodium,
Metal Halide and Mercury lamp
sources.
REFLECTOR
The optical system is a
hydroformed anodized aluminum
reflector with a Dacron polyester
filter.
OPTIONS (add as suffix)
1=Single Fuse, Internally Mounted (120 or 277V)
2=Double Fuse, Internally Mounted (208, 240, or 480V)
4=Photocontrol Receptacle
WH=White
BK=Black
BZ=Bronze
E=150W/100V/HPS Ballast
M=MOV Lightning Surge Protector 4
H=Plug-in Starter Receptacle
K=Level Indicator
U=UL/CSA Listed
ACCESSORIES (order separately)
OA/RA1013=Photocontrol Shorting Cap
OA/RA1014=120V Photocontrol
OA/RA1016=105V-285V Photocontrol
OA/RA1027=480V Photocontrol
OA1028=Field Installed PCR Kit
OA1213=TufGuard Vandal Shield
B A L L A S T A S S E M B LY
Hard mounted ballast with
encapsulated starter for protection
O P T I O N A L C O L O R S [ S t a n d a r d c o l o r i s g r e y, o t h e r f i n i s h c o l o r s a v a i l a b l e . C o n s u l t y o u r C o o p e r L i g h t i n g r e p r e s e n t a t i v e ]
from environmental abuse.
Standard two position tunnel type
compression terminal block. Three
position available. Consult your
Streetworks Representative.
WH
White
BK
Black
BZ
Bronze
MOUNTING
Two-bolt/one bracket slipfitter with
cast-in pipe stop and leveling steps.
Fixed-in-place birdguard seals
around 1 1/4" or 2" mounting arms.
E PA :
Effective Projective Area: .80
S H I P P I N G D ATA
Approximate Net Weight:
28 lbs. (13 kgs.)
NOTE: 1 150W units are for S55 lamp. 2 Refer to technical section for lamp/ballast/voltage compatibility. 3 Available in 120/240V dual voltage or single voltage only for 50-150W. 4 MOV option is not available for any system
requiring a three position terminal block (Example—240V with PCR wired 120V). In order for MOV option to function center terminal of three position terminal block must be connected to “Earth” ground.
116 S T R E E T W O R K S O u t d o o r L i g h t i n g S o l u t i o n s
Cooper Lighting
O V H F L AT G L A S S R O A D W AY
P H O T O M E T R I C S [ C o m p l e t e I E S f i l e s a v a i l a b l e a t w w w. c o o p e r l i g h t i n g . c o m ]
4
4
3
3
2
2
1
1
B
B
0
A
1
E
4
3
2
1
0
1
2
3
4
E
C
D
D
5
0
A
C
1
2
2
3
3
4
4
5
5
4
3
2
1
OVH15S3D.IES
150-Watt HPS
16,000-Lumen Clear Lamp
Type III-Medium Cutoff
OVH15S2D.IES
150-Watt HPS
16,000-Lumen Clear Lamp
Type II-Medium Cutoff
0
1
2
3
4
5
F O O T C A N D L E TA B L E
Select mounting height and read across for footcandle
values of each isofootcandle line. Distance in units of
mounting height.
Mounting
Footcandle Values for
Height
Isofootcandle Lines
A
B
C
D
E
OVH15S2D.IES
20'
3.12
1.56
0.78
0.39
0.16
25'
2.00
1.00
0.50
0.25
0.10
30'
1.30
0.65
0.33
0.16
0.07
35'
1.02
0.51
0.26
0.13
0.05
OVH15S3D.IES
20'
3.12
25'
2.00
30'
1.30
35'
1.02
1.56
1.00
0.65
0.51
0.78
0.50
0.33
0.26
0.39
0.25
0.16
0.13
0.16
0.10
0.07
0.05
PHOTOMETRIC DISTRIBUTION [Curve Number]
Wattage
50-150
Light
Source 1
HPS
Lens
Type
Flat Glass
175
MH
Flat Glass
200-250
HPS
Flat Glass
II MCO
OVH15S2D
(150W)
OVH17M2D
(175W)
N/A
III MCO
OVH15S3D
(150W)
OVH17M3D
(175W)
OVH25S3D
(250W)
NOTE: 1 All light sources are clear unless noted otherwise.
Cooper Lighting
STREETWORKS Outdoor Lighting Solutions
117
R O A D W AY
OVX DROP PRISMATIC REFRACTOR
50-400W
MH/HPS/MERCURY
R O A D W AY L U M I N A I R E
28 1/4" [718mm]
11 1/4"
[286mm]
NOTE: In flat glass applications only.
13 1/4" [337mm]
STREETWORKS™
HOUSING
Die-cast aluminum housing and
latch. Standard grey polyester
powder coat finish. Other finish
colors available. Consult your
Streetworks Representative.
Optional NEMA twistlock
O R D E R I N G I N F O R M AT I O N
SAMPLE NUMBER: OVX40SWW3E4
PRODUCT
FAMILY
OVX
photocontrol receptacle also
available.
REFLECTOR
The optical system is a
hydroformed anodized aluminum
reflector with a Dacron polyester
filter.
DOOR
LAMP WATTAGE
50=50W
70=70W
10=100W
15=150W 1
17=175W
20=200W
25=250W
24=250/400W
wired 250W
40=400W
42=400/250W
wired 400W
LAMP TYPE 2
S=High Pressure
Sodium
V=Mercury
M=Metal Halide
BALLAST TYPE 2
C=CWI
H=Reac./HPF
K=10KV CWA 3
M=Mag. Reg.
N=Hi. Reac./NPF
P=Hi. Reac./HPF
R=Reac./NPF
W=CWA
DISTRIBUTION 4
VOLTAGE 2
2=Type II
2=120V
3=Type III
0=208V
4=240V
7=277V
8=480V
F=120/240 wired 120V
P=240 w/PCR wired 120V
W=Multi-Tap wired 120V
N=Multi-Tap wired 277V
CUTOFF 4
D=MCO
E=MSCO
OPTIONS +
ACCESSORIES
(See Below)
Die-cast aluminum door frame with
integral hinges for hands free
OPTIONS + ACCESSORIES [Must be listed in the order shown and separated by a dash]
installation, relamping and
maintenance. ANSI wattage/source
label.
LENS
Removable prismatic refractor
for use with High Pressure Sodium,
Metal Halide and Mercury lamp
sources.
SOCKET
Adjustable mogul-base porcelain
socket.
B A L L A S T A S S E M B LY
Hard mounted ballast with
encapsulated starter for protection
from environmental abuse.
OPTIONS (add as suffix)
1=Single Fuse, Internally Mounted (120 or 277V)
2=Double Fuse, Internally Mounted (208, 240, or 480V)
4=Photocontrol Receptacle
WH=White
BK=Black
BZ=Bronze
E=150W/100V/HPS Ballast
F=Flat Glass (available only in MCO)
G=Borosilicate Glass Refractor (175W & below) 5
H=Plug-in Starter Receptacle
K=Level Indicator
M=MOV Lightning Surge Protector 6
P=Polycarbonate Refractor (250W Max.)
T=Swing-down Ballast Bridge 7
U=UL/CSA Listed
ACCESSORIES (order separately)
RA1001=Cutoff Visor
OA/RA1013=Photocontrol Shorting Cap
OA/RA1014=120V Photocontrol
OA/RA1016=105V-285V Photocontrol
OA/RA1027=480V Photocontrol
OA1028=Field Installed PCR Kit
OA1217=TufGuard Vandal Shield
Standard two position tunnel type
compression terminal block.
Optional swing-down ballast bridge
O P T I O N A L C O L O R S [ S t a n d a r d c o l o r i s g r e y, o t h e r f i n i s h c o l o r s a v a i l a b l e . C o n s u l t y o u r C o o p e r L i g h t i n g r e p r e s e n t a t i v e ]
also available (up to 250W).
MOUNTING
Two-bolt/one bracket slipfitter with
cast-in pipe stop and leveling steps.
Fixed-in-place birdguard seals
WH
White
BK
Black
BZ
Bronze
around 1 1/4" or 2" mounting arms.
E PA :
Effective Projective Area: .87
S H I P P I N G D ATA
Approximate Net Weight:
35 lbs. (16 kgs.)
NOTE: 1 150W units are for S55 lamp. 2 Refer to technical section for lamp/ballast/voltage compatibility. 3 Available in 120/240V dual voltage or single voltage only for 50-150W. 4 Other distributions & cutoffs available. Consult
your Streetworks Representative. 5 Acrylic is standard on units 50W through 150W HPS and 175W mercury. Glass standard for 200-250W. 6 MOV option is not available for any system requiring a three position terminal
block (Example—240V with PCR with wired 120V). In order for MOV option to function center terminal of three position terminal block must be connected to “Earth” ground. 7 Not available on 250W Mag. Reg. or 400W
units.
118 S T R E E T W O R K S O u t d o o r L i g h t i n g S o l u t i o n s
Cooper Lighting
O V X D R O P P R I S M AT I C R E F R A C T O R R O A D W AY
P H O T O M E T R I C S [ C o m p l e t e I E S f i l e s a v a i l a b l e a t w w w. c o o p e r l i g h t i n g . c o m ]
E
B
A
4
4
3
3
2
2
1
1
C
D
A B C
0
D
E
0
1
1
2
2
3
3
4
4
5
4
3
2
1
0
1
2
3
4
5
5
4
3
2
1
0
1
2
3
OVX25S2E.IES
250-Watt HPS
27,500-Lumen Clear Lamp
Type II-Medium Semi-Cutoff
OVX40S3E.IES
400-Watt HPS
50,000-Lumen Clear Lamp
Type III-Medium Semi-Cutoff
4
5
F O O T C A N D L E TA B L E
Select mounting height and read across for footcandle
values of each isofootcandle line. Distance in units of
mounting height.
Mounting
Footcandle Values for
Height
Isofootcandle Lines
A
B
C
D
E
OVX40S3E.IES
25'
3.92
1.96
0.98
0.49
0.20
30'
2.72
1.36
0.68
0.34
0.14
35'
2.00
1.00
0.50
0.25
0.10
40'
1.52
0.76
0.38
0.19
0.08
OVX25S2E.IES
25'
3.92
30'
2.72
35'
2.00
40'
1.52
1.96
1.36
1.00
0.76
0.98
0.68
0.50
0.38
0.49
0.34
0.25
0.19
0.20
0.14
0.10
0.08
PHOTOMETRIC DISTRIBUTION [Curve Number]
Wattage
50-150
50-150
200-400
175
175-250
250-400
Light
Source 1
HPS
(ED23 1/2)
HPS
(ED23 1/2)
HPS
(ED-18)
MV/MH
(ED-28)
MV/MH
(ED-28)
MH
(ED-28)
Lens
Type 2
Acrylic
Glass
II MSCO
N/A
Glass
OVX15S2EG
(150W)
OVX25S2EG
(250W)
OVX17M2E
(175W)
N/A
Glass
N/A
Glass
Acrylic
III MSCO
OVX15S3E
(150W)
OVX15S3EG
(150W)
OVX25S3EG
(250W)
OVX17M3E
(175W)
OVX17M3EG
(175W)
OVX40M3EG
(400W)
II MCO
N/A
III MCO
N/A
II 4 WAY
N/A
OVX10S2DF
(100W)
OVX25S2DF
(250W)
N/A
(175W)
N/A
(175W)
OVX40M2DG
(400W)
OVX15S3DF
(150W)
OVX25S3DF
(250W)
N/A
N/A
N/A
N/A
N/A
N/A
OVX25S7E
(250W)
N/A
NOTE: 1 All light sources are clear unless noted otherwise. 2 Prismatic refractor.
SWING-DOWN BALLAST MODULE
Cooper Lighting
STREETWORKS Outdoor Lighting Solutions
119
R O A D W AY
OVY LOW-PROFILE DROP PRISMATIC
150-400W
MH/HPS/MERCURY
R O A D W AY L U M I N A I R E
30" [762mm]
9 3/4"
[248mm]
NOTE: In select distributions only.
16 15/16" [430mm]
STREETWORKS™
HOUSING
Die-cast aluminum housing with
stainless steel bail latch. Standard
grey polyester powder coat finish.
Other finish colors available.
Consult your Streetworks
Representative. Optional NEMA
O R D E R I N G I N F O R M AT I O N
SAMPLE NUMBER: OVY15SWW2D4
PRODUCT
FAMILY
OVY
twistlock photocontrol receptacle
also available.
SOCKET
Adjustable mogul-base porcelain
socket.
LAMP WATTAGE
15=50W 1
20=200W
25=250W
31=310W
40=400W 2
24=250/400
wired 250W 2
42=400/250W
wired 400W 2
LAMP TYPE 3
S=High
Pressure
Sodium
V=Mercury 4
M=Metal Halide
DOOR
Die-cast aluminum door frame with
BALLAST TYPE 3
C=CWI
M=Mag. Reg.
W=CWA
R=Reac./NPF
P=Hi. Reac./HPF
H=Reac./HPF
N=Hi. Reac./NPF
K=10KV CWA
DISTRIBUTION 5
VOLTAGE 3
2=Type II
2=120V
3=Type III
0=208V
4=Type IV
4=240V
7=277V
8=480V
9=347V
F=120/240 wired 120V
P=240 w/PCR wired 120V
W=Multi-Tap wired 120V
N=Multi-Tap wired 277V
V=Multi-Tap wired 240V
CUTOFF
D=MCO
E=MSCO
J=LNCO
OPTIONS +
ACCESSORIES
(See Below)
integral hinges for hands free
installation, relamping and
OPTIONS + ACCESSORIES [Must be listed in the order shown and separated by a dash]
maintenance. ANSI wattage/source
label.
LENS
Removable borosilicate glass
refractor for use with High Pressure
Sodium, Metal Halide and Mercury
lamp sources. Low profile glass
provides 65% less glare than typical
drop lens reflectors.
O P T I C A L A S S E M B LY
The optical system is a
hydroformed anodized aluminum
reflector with a Dacron polyester
filter.
OPTIONS (add as suffix)
1=Single Fuse, Internally Mounted (120 or 277V)
2=Double Fuse, Internally Mounted (208, 240, or 480V)
4=Photocontrol Receptacle
WH=White
BK=Black
BZ=Bronze
E=150W/100V/HPS Ballast
H=Plug-in Starter Receptacle
K=Level Indicator
L=Lamp
M=MOV Lightning Surge Protector 6
T=Swing-down Ballast Bridge
U=UL/CSA Listed
ACCESSORIES (order separately)
RA1003=Cutoff Visor
OA/RA1013=Photocontrol Shorting Cap
OA/RA1014=120V Photocontrol
OA/RA1016=105V-285V Photocontrol
OA/RA1027=480V Photocontrol
OA1028=Field Installed PCR Kit
OA1215=TufGuard Vandal Shield
B A L L A S T A S S E M B LY
Hard mounted ballast with
O P T I O N A L C O L O R S [ S t a n d a r d c o l o r i s g r e y, o t h e r f i n i s h c o l o r s a v a i l a b l e . C o n s u l t y o u r C o o p e r L i g h t i n g r e p r e s e n t a t i v e ]
encapsulated starter for protection
from environmental abuse.
Standard two position tunnel type
compression terminal block.
Optional swing-down ballast bridge
also available (Not available for 3G
WH
White
BK
Black
BZ
Bronze
applications).
MOUNTING
Two-bolt/one bracket slipfitter with
cast-in pipe stop and leveling steps.
Fixed-in-place birdguard seals
around 1 1/4" or 2" mounting arms.
(Birdguard not needed for 2" arm.)
E PA :
Effective Projective Area: .51
S H I P P I N G D ATA
Approximate Net Weight:
33 lbs. (15 kgs.)
NOTE: 1 150W units are for S55 lamp. 2 400W Metal Halide requires ED28 lamp. 3 Refer to technical section for lamp/ballast/voltage compatibility. 4 Not available in 400W. 5 Other distributions & cutoffs available. Consult your
Streetworks Representative. 6 MOV option is not available for any system requiring a three position terminal block (Example—240V with PCR wired 120V). In order for MOV option to function center terminal of three
position terminal block must be connected to “Earth” ground.
124 S T R E E T W O R K S O u t d o o r L i g h t i n g S o l u t i o n s
Cooper Lighting
O V Y L O W - P R O F I L E D R O P P R I S M AT I C R O A D W AY
P H O T O M E T R I C S [ C o m p l e t e I E S f i l e s a v a i l a b l e a t w w w. c o o p e r l i g h t i n g . c o m ]
4
4
3
3
E
D
C
A
5
4
3
2
1
0
1
C
1
A
B
2
3
4
2
D
2
E
1
B
0
0
1
1
2
2
3
3
4
4
5
OVY40S2D.IES
400-Watt HPS
50,000-Lumen Clear Lamp
Type II-Medium Cutoff
5
4
3
2
1
0
1
2
3
4
5
OVY40S3E.IES
400-Watt HPS
50,000-Lumen Clear Lamp
Type III-Medium Semi-Cutoff
F O O T C A N D L E TA B L E
Select mounting height and read across for footcandle
values of each isofootcandle line. Distance in units of
mounting height.
Mounting Footcandle Values for
Height
Isofootcandle Lines
A
B
C
D
E
OVY40S2D.IES
25'
3.92
1.96
0.98
0.49
0.20
30'
2.72
1.36
0.68
0.34
0.14
35'
2.00
1.00
0.50
0.25
0.10
40'
1.52
0.76
0.38
0.19
0.08
OVY40S3E.IES
25'
3.92
30'
2.72
35'
2.00
40'
1.52
1.96
1.36
1.00
0.76
0.98
0.68
0.50
0.38
0.49
0.34
0.25
0.19
0.20
0.14
0.10
0.08
PHOTOMETRIC DISTRIBUTION [Curve Number]
Wattage
150
Light
1
Source
HPS
200-400
HPS
250-400
MH
(ED28)
MV
(ED28)
250
Lens
Type
Low
Profile
Low
Profile
Low
Profile
Low
Profile
III MSCO
N/A
IV MSCO
N/A
OVY40S3E
(400W)
N/A
OVY40S4E
(400W)
N/A
N/A
N/A
II MCO
OVY15S2D
(150W)
OVY40S2D
(400W)
OVY40M2D
(400W)
OVY25V2D
(250W)
III MCO
OVY15S3D
(150W)
N/A
OVY40M3D
(400W)
OVY25V3D
(250W)
NOTE: 1 All light sources are clear unless noted otherwise.
SWING-DOWN BALLAST MODULE
Cooper Lighting
STREETWORKS Outdoor Lighting Solutions
125
R O A D W AY
50-250W
MH/HPS/MERCURY
OVZ DROP LENS REFRACTOR
R O A D W AY L U M I N A I R E
27 3/32" [688mm]
9 3/4"
[248mm]
12 5/8" [321mm]
STREETWORKS™
HOUSING
Die-cast aluminum housing and
latch. Standard grey polyester
powder coat finish. Other finish
colors available.
REFLECTOR
O R D E R I N G I N F O R M AT I O N
SAMPLE NUMBER: OVZ50SR22E4
PRODUCT
FAMILY
OVZ
The optical system is a
hydroformed anodized aluminum
reflector with a Dacron polyester
filter.
LAMP WATTAGE
50=50W
70=70W
10=100W
15=150W 1
17=175W
20=200W
25=250W
LAMP TYPE 2
S=High Pressure
Sodium
V=Mercury
M=Metal Halide
DOOR
Die-cast aluminum door frame
with integral hinges for hands free
BALLAST TYPE 2
C=CWI
H=Reac./HPF
K=10KV CWA 3
M=Mag. Reg.
N=Hi. Reac./NPF
P=Hi. Reac./HPF
R=Reac./NPF
W=CWA
DISTRIBUTION 4
VOLTAGE 2
2=Type II
2=120V
3=Type III
0=208V
4=240V
7=277V
8=480V
9=347V
F=120/240 wired 120V
P=240 w/PCR wired 120V
W=Multi-Tap wired 120V
N=Multi-Tap wired 277V
V=Multi-Tap wired 240V
CUTOFF 4
D=MCO
E=MSCO
OPTIONS +
ACCESSORIES
(See Below)
installation, relamping and
maintenance. ANSI wattage/source
OPTIONS + ACCESSORIES [Must be listed in the order shown and separated by a dash]
label.
LENS
Removable prismatic refractor
for use with High Pressure Sodium,
Metal Halide and Mercury lamp
sources.
SOCKET
Adjustable mogul-base porcelain
socket.
B A L L A S T A S S E M B LY
Hard mounted ballast with
encapsulated starter for protection
from environmental abuse.
Standard two position tunnel type
compression terminal block. Three
position available.
OPTIONS (add as suffix)
1=Single Fuse, Internally Mounted (120 or 277V)
2=Double Fuse, Internally Mounted (208, 240, or 480V)
4=Photocontrol Receptacle
WH=White
BK=Black
BZ=Bronze
E=150W/100V/HPS Ballast
G=Borosilicate Glass Refractor (175W & below) 5
H=Plug-in Starter Receptacle
K=Level Indicator
M=MOV Lightning Surge Protector 6
P=Polycarbonate Refractor (250W Max.)
U=UL/CSA Listed
F=Flat Glass
ACCESSORIES (order separately)
RA1001=Cutoff Visor
OA/RA1013=Photocontrol Shorting Cap
OA/RA1014=120V Photocontrol
OA/RA1016=105V-285V Photocontrol
OA/RA1027=480V Photocontrol
OA1028=Field Installed PCR Kit
OA1216=TufGuard Vandal Shield
O P T I O N A L C O L O R S [ S t a n d a r d c o l o r i s g r e y, o t h e r f i n i s h c o l o r s a v a i l a b l e . C o n s u l t y o u r C o o p e r L i g h t i n g r e p r e s e n t a t i v e ]
MOUNTING
Two-bolt/one bracket slipfitter
with cast-in pipe stop and leveling
steps. Fixed-in-place birdguard seals
around 1 1/4" or 2" mounting arms.
WH
White
BK
Black
BZ
Bronze
E PA :
Effective Projective Area: .85
S H I P P I N G D ATA
Approximate Net Weight:
31 lbs. (14 kgs.)
NOTE: 1 150W units are for S55 lamp. 2 Refer to technical section for lamp/ballast/voltage compatibility. 3 Available in 120/240V dual voltage or single voltage only (120, 208, 240, 277 or 480V). 50-150W. 4 Other distributions &
cutoffs available. Consult your Streetworks Representative. 5 Acrylic is standard on units 50W through 150W HPS and 175W mercury. Glass standard for 200-250W. 6 MOV option is not available for any system requiring
a three position terminal block (Example—240V with PCR wired 120V). In order for MOV option to function center terminal of three position terminal block must be connected to “Earth” ground.
112 S T R E E T W O R K S O u t d o o r L i g h t i n g S o l u t i o n s
Cooper Lighting
O V Z D R O P L E N S R E F R A C T O R R O A D W AY
P H O T O M E T R I C S [ C o m p l e t e I E S f i l e s a v a i l a b l e a t w w w. c o o p e r l i g h t i n g . c o m ]
4
4
3
3
E
A
5
4
3
2
1
0
1
E
2
D
C
1
B
2
D
1
C
B
A
2
3
4
0
0
1
1
2
2
3
3
4
4
5
OVZ15S2E.IES
150-Watt HPS
16,000-Lumen Clear Lamp
Type II-Medium Semi-Cutoff
5
4
3
2
1
0
1
OVZ15S3E.IES
150-Watt HPS
16,000-Lumen Clear Lamp
Type III-Medium Semi-Cutoff
2
3
4
5
F O O T C A N D L E TA B L E
Select mounting height and read across for footcandle
values of each isofootcandle line. Distance in units of
mounting height.
Mounting
Footcandle Values for
Height
Isofootcandle Lines
A
B
C
D
E
OVZ15S2E.IES
20'
3.12
1.56
0.78
0.39
0.16
25'
2.00
1.00
0.50
0.25
0.10
30'
1.30
0.65
0.33
0.16
0.07
35'
1.02
0.51
0.26
0.13
0.05
OVZ15S3E.IES
20'
3.12
25'
2.00
30'
1.30
35'
1.02
1.56
1.00
0.65
0.51
0.78
0.50
0.33
0.26
0.39
0.25
0.16
0.13
0.16
0.10
0.07
0.05
PHOTOMETRIC DISTRIBUTION [Curve Number]
WATTAGE
50-150
50-150
200-250
175
175-250
LIGHT
SOURCE 1
HPS
(ED23 1/2)
HPS
(ED23 1/2)
HPS
(ED-18)
MV/MH
(ED-28)
MV/MH
(ED-28)
LENS
TYPE 2
Acrylic
Glass
Glass
Acrylic
Glass
II MSCO
OVZ15S2E
(150W)
OVZ15S2EG
(150W)
OVZ25S2EG
(250W)
OVZ17M2E
(175W)
N/A
III MSCO
OVZ15S3E
(150W)
OVZ15S3EG
(150W)
OVZ25S3EG
(250W)
OVZ17M3E
(175W)
OVZ17M3EG
(175W)
II MCO
N/A
II 4 WAY
N/A
N/A
OVZ15S7EG
(150W)
OVZ25S7EG
(250W)
N/A
N/A
N/A
OVZ17M2DG
(175W)
N/A
NOTE: 1 All light sources are clear unless noted otherwise. 2 Prismatic refractor.
Cooper Lighting
STREETWORKS Outdoor Lighting Solutions
113
WALL MOUNT
COOPER LIGHTING - LUMARK®
DESCRIPTION
DIMENSIONS
The Lumark Wal-Pak provides
a durable and efficient exterior
light source for any application
requiring maximum
performance and minimum
maintenance. The rugged,
die-cast aluminum housing,
stainless steel hardware and
sealed and gasketed optics
compartment combine to
make the Wal-Pak virtually
impenetrable to contaminants.
U.L. listed and labeled for wet
locations. CSA certified.
9 5/8"
[244mm]
50-200W HPS & MH, 250W MH
10 1/2" [267mm]
250W HPS, 400W HPS & MH
12 1/16" [306mm]
16" [406mm]
WL WAL-PAK
5 0 - 4 0 0 W
High Pressure Sodium
Pulse Start Metal Halide
Metal Halide
WALL MOUNT
LUMINAIRE
O R D E R I N G I N F O R M AT I O N
• Captive corrosion
resistant, single point
mounting screw
• Die-cast aluminum
housing is finished in dark
bronze polyester powder
coat
• Impact resistant
borosilicate prismatic
glass or polycarbonate
refractor with aluminum
reflector that provides
maximum photometric
performance and beam
efficiency
• High-temperature silicone
gasketing seals out
external contaminants
• Mogul-base porcelain
socket, except 150W Metal
Halide and below has
medium-base
• Normal or High power
factor ballast with class H
insulation. Minimum
starting temperature
is -40°C (-40°F) for HPS
and -30° C (-20°F) for MH
and MP
• Door assembly is hinged
at bottom for easy
installation and relamping
• U.L. listed for wet
locations. CSA certified
• Approximate net weight:
32-42 lbs. (15-19 kgs.)
398
COOPER LIGHTING
S A M P L E N U M B E R : M H W L - 2 5 0 - M T- L L
Lamp Type
HP=High
Pressure
Sodium 1
MH=Metal
Halide
MP=Pulse
Start MH
(CWA) 2
Series/Lens
WL=Wal-Pak/
Borosilicate Glass
Lens/HPF
P L = Wal-Pak/
Polycarbonate
Lens/HPF 3
WE=Wal-Pak/
Borosilicate Glass
Lens/NPF
Lamp Wattage
50=50W
70=70W
100=100W
150=150W
175=175W
200=200W 5
250=250W
320=320W 5
350=350W 5
400=400W
4
Voltage 6
120V
208V
240V
277V
347V
480V
MT=Multi-Tap 7
TT=Triple-Tap 8
5T=5-Tap 9
Options &
Accessories
(See Below)
STOCK SAMPLE NUMBER (Lamp Included)
SAMPLE NUMBER: PS10
Series
P=Wal-Pak
Lamp Type
S=High Pressure
Sodium 1
M=Metal Halide
Lamp Wattage
100=100W
150=150W
175=175W
250=250W
400=400W
Option
5T=5-Tap
(400W Metal Halide Only)
NOTES: Options not available with stock products.
Order Accessories as separate items for field installation.
Refer to standard ordering information to add options
and accessories.
Options (add as suffix) 10
Q=Quartz Restrike DC Bayonet Base (Hot strike only)
EM=Quartz Restrike with Time Delay (Cold Start)
EM/SC=Emergency Separate Circuit
F1=Single Fuse (120, 277 or 347V)
F2=Double Fused (208, 240 or 480V)
LL=Lamp Included 11
TR=Tamper-resistant Screws
PE=Internal Photocontrol
Accessories (order separately)
WG/WL=Wire Guard (Not compatible with PCS) 12
PCS=Polycarbonate Vandal Shield (Not compatible with WG/WL)
TWC=Thru-way Conduit
VS/WL=Visor Cut-off Shield 12
WLR=Replacement Glass Lens
PLL=Replacement Polycarbonate Lens (150W maximum)
PE/MT=Field-installed Photocontrol
TRSD-1/4-20=Tamper-resistant Screwdriver
PE-347=Field-installed Photocontrol, 347V
PE-480V=Field-installed 480V Photocontrol
FC/WL=Full Cut-off Shield 12
FSC/WL=Semi Cut-off Shield 12
12
NOTES: 1 Not available in 175W. 2 200, 250, 320, 350 & 400W only (Limited lamp availability, consult manufacturer). 3 150W maximum in High Pressure Sodium,
175W maximum in Metal Halide. 4 Medium-base socket for Metal Halide 150W and below. 5 Pulse start Metal Halide only. 6 Products also available in non-us
voltages & 50Hz for international markets. 7 Mult-tap ballast 120/208/240/277V. 8 Triple-tap ballast 120/277/347V. 9 5-Tap ballast 120/208/240/277/480V. 400W
Metal Halide only. 10 Must be listed in the order shown and seperated by a dash. 11 Lamp is shipped separate from luminaire. Lamp is Cooper designated
product based on luminaire requirements. Specified lamps must be ordered as a separate line item. 12 Wire guard, visor, and shields can not be used
together on same unit. 13 For complete product data, reference the Lumark Specification binder. 14 Specifications and dimensions subject to change without
notice. 15 Products also available in non-US voltages and frequencies for international markets. 16 Consult your Cooper Lighting Representative for
availability and ordering information.
