7.6mmx7.6mm SUPER FLUX LED LAMP
AT T E N T I O N
OBSERVE PRECAUTIONS
FOR HANDLING
ELECTROSTATIC
DISCHARGE
SENSITIVE
DEVICES
L-7676CVGC-H
GREEN
Features
Description
lDESIGN FOR HIGH CURRENT OPERATION.
InGaN on SiC Light Emitting Diode.
lSUPER FLUX OUTPUT.
lOUTSTANDING MATERIAL EFFICIENCY.
lRELIABLE AND RUGGED.
The Green source color devices are made with
Static electricity and surge damage the LEDS.
It is recommended to use a wrist band or
anti-electrostatic glove when handling the LEDs.
All devices, equipment and machinery must be
electrically grounded.
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.25(0.01") unless otherwise noted.
3. Lead spacing is measured where the lead emerge package.
4. Specifications are subject to change without notice.
SPEC NO: DSAB3625
APPROVED: J. Lu
REV NO: V.4
CHECKED: Allen Liu
DATE: MAY/28/2003
DRAWN: Z.Y.YANG
PAGE: 1 OF 3
Selection Guide
P ar t N o .
Dic e
L-7676C VGC -H
Iv (m c d )
@ 20 m A *70m A
L en s Ty p e
GREEN (InGaN)
Mi n .
2500
WATER C LEAR
Notes:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value.
2. * Luminous intensity with asterisk is measured at 70mA.
3.Drive current between 10mA and 30mA are recommended for long term performance.
4.Operation at current below 10mA is not recommended.
Ty p .
4300
V i ew i n g
An g le
2θ1/2
70°
*5700
*9500
70°
Un its
Tes t C o n d i t i o n s
Electrical / Optical Characteristics at TA=25°°C
Sy m b o l
P ar am et er
D ev i c e
Ty p .
Max .
λp e a k
Peak Wavelength
Green
520
nm
I F =20mA
λD
D omi nate Wavelength
Green
525
nm
I F =20mA
∆λ1/2
Spectral Li ne Half-wi dth
Green
35
nm
I F =20mA
C
C apaci tance
Green
45
pF
VF =0V;f=1MHz
VF
Forward Voltage
Green
3.7
4.1
V
I F =20mA
IR
Reverse C urrent
Green
10
uA
V R = 5V
Absolute Maximum Ratings at TA=25°°C
P ar am et er
Gr een
Un its
Power di ssi pati on
120
mW
Peak Forward C urrent [1]
150
mA
D C Forward C urrent
30
Reverse Voltage
5
-40°C To +85°C
Operati ng/Storage Temperature
Lead Solder Temperature [2]
Notes:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
2. 2mm below package base.
SPEC NO: DSAB3625
APPROVED: J. Lu
mA
REV NO: V.4
CHECKED: Allen Liu
V
260°C For 5 Seconds
DATE: MAY/28/2003
DRAWN: Z.Y.YANG
PAGE: 2 OF 3
Green
SPEC NO: DSAB3625
APPROVED: J. Lu
L-7676CVGC-H
REV NO: V.4
CHECKED: Allen Liu
DATE: MAY/28/2003
DRAWN: Z.Y.YANG
PAGE: 3 OF 3