accoLED 5
integrations
accoLED 5
project
type
quantity
Optics
Delivered Lumens Pending Test Results.
Lengths:
precise lengths
non-standard nominal individual lengths: 2’, 3’, 5', 6', 7', 9', 10', 11', etc.
shadow molding perimeter
nominal rows longer than 24'
hidden grid
exact lengths to the nearest 100th of an inch
patterns
╔╔ c ustom angles
Optons:
recessed
Additional Integrations Selections
custom finish
╔╔ precise lengths
MRI configuration
╔╔ wall-to-wall specification
Design-Assist:
╔╔ L's, U's, squares and rectangles
in-house design-assist team manages your unique project
╔╔ tig-welded corners, sanded smooth to eliminate light leaks
Mounting:
╔╔ f ully lit corners with mitered lenses
gyp trimless
╔╔ staggered trays eliminate socket shadows
1/2" trim
╔╔ seamless transitions between sections and various mounting types
t-bar
╔╔ LED recommended for patterns, T5 staggered allowed, T8 n/a
+
custom mounting
Cross Sections
Multiple configurations available sampling shown
3.375”
2.25”
Available Light Platforms
LED
integrations
Available Mounting
recessed
controls
friendly
w w w.al i ghts .c om
2
accoLED 5
integrations
Linear Dimensions:
Standard lengths available are located on the ‘elements’ spec sheet. All other
lengths should be specified as follows...
Nominal Damp Location Row
R___: Specify in nominal feet.
Choose when nominal length is acceptable.
Actual length will be shorter or longer due to metric lamp lengths. Lengths over
12’ are comprised of multiple sections.
Examples: a nominal 54ft row begins as ACL5R54; a 7ft individual as ACL5R7.
Exact Row
M___: Specify overall length in inches to the nearest hundredth.
Choose when exact lengths are required as determined by space constraints, etc.
Submittals required. Lengths over 12’ are comprised of multiple sections.
Examples: an exact 54ft row begins as ACL5M648.00; a 7ft individual as
ACL5M84.00.
Pattern Dimensions:
Each pattern contains a precision-formed optical platform engineered for
maximum light output and even distribution.
Pattern
Specify overall length of each section in inches to the nearest hundredth.
Choose when multiple angles are necessary. Submittals required: contact our
design-assist team and submit architectural drawings with precise lengths. 90°
angles are assumed unless otherwise specified.
LED:
LED
Shadowmold. Dual-flanged housing creates a 5/8" shadowed
gap along wall/surface with choice of ceiling flange on opposite side
for perimeter mounting. Shadowmold spacer is painted black.
Exposed side of housing next to wall is unpainted - housing may be
field-painted if necessary.
"RG5": is intended only for perimeter mounting in gyp ceiling. The 5"
regressed gyp flange on one side, with shadowmolding on the opposite side,
results in a 8.5” overall height. Interior 5" regressed portion is exposed raw
aluminum and visible unless finish is chosen. Contractor should apply ceiling
paint if finish is not chosen.
Finish:
Electrostatically applied powder coat finish.
Construction:
60% recycled aluminum extruded housing. Steel endcaps with earthquake
suspension cable attachment holes.
Optional MRI housing configuration is specially built with all non-ferrous
materials.
Listing:
UL/CUL. Damp or Wet Location.
Family Luminaires:
ACL1 suspended, ACL2 suspended/wall, ACL3 suspended/ceiling/wall, ACL4
wall.
5yr warranty. >60,000hr LED life. Tested to LM-79 and LM-80. See
wattage/lumen table for specifications per foot. All specifications are
subject to change.
Companion Luminaires:
D1 suspended, D2 suspended/wall, D3 suspended/ceiling/wall, D4 wall, D5
recessed, D6 recessed.
Mounting:
Flush gyp/hard ceiling or wall. “Flangeless” appearance for gyp or
other hard ceiling/wall. Flange is not visible and is not factory-painted.
Raw aluminum flange must be attached to blocking (by others),
mudded over and painted by ceiling contractor for flangeless
appearance.
Regressed flush gyp/hard ceiling or wall. Same as above except
flange raises lens up into ceiling. "RG" is 1" regressed resulting in a
4.5” height. Interior 1" regressed portion is exposed raw aluminum and
visible unless finish is chosen. Contractor should apply ceiling paint if
finish is not chosen.
Trim Flange. 1/2” visible powdercoated flange. Use for any gyp or
hard ceiling/wall that requires a minimal flange covering the ceiling
cut-out edge. Choose finish color for trim flange.
T-Bar. Standard T-Bar/Grid Ceiling: 9/16” or 15/16”
standard T-Bar or 9/16” slot ceiling. Raw aluminum flange
sits on T-Bar, is not visible and is not painted.
4” Armstrong Techzone™ / USG Logix™ or other 4” Utility Systems: Suitable for
use in 4” on-center standard or slot T-Bar systems. Raw aluminum flange sits on
T-Bar, is not visible and is not painted. The N4 option requires that the housing sit
on top of the slot, creating a slightly recessed fixture. The T4 fixture will sit flush
to ceiling.
Concealed Grid for Decoustic Ceilencio®: 2-3/4” panel/grid regress. Raw
aluminum flange sits on T-Bar, is not visible and is not painted.
Legend:
3
1.
Emergency ballast not applicable on lengths 3ft or less.
2.
Multi-circuiting: submit multi-circuiting requirements during submittal process.
3.
Standard on/off occupancy sensor: Wattstopper FS-205 with minimal 1” diameter.
4.
Standard occupancy sensor with photocell: Wattstopper FS-205 wired for daylight
harvesting. Requires 0-10V dimming ballast.
5.
The N4 mounting requires the housing to sit on top of the slot T-Bar creating a slight
regress and will not sit flush to ceiling tile.
w w w.al i ghts .c om
a·light
project
Series:
ACL 5
LCW
LWW
LW
LC
UW
UC
UWW
UWC
RW
RC
P
dimming - specify manufacturer, model/series and voltage
emergency - specify model/series or lumens
external fusing
multi-circuit
new york city code
chicago plenum code
occupancy sensor
photocell/daylight sensor
natatorium application
wet label
MRI housing configuration
Pattern lengths: (specify in inches to nearest 100th)
2 leg patterns "L's"
1st length = short leg x 2nd length = long leg
example: ACL3LCW103.65 x 134.80
3 leg patterns "U's"
1st length x center length x last length
ACL3P103.65 x 134.80 x 103.65
> 3 legs of different lengths
enter lengths in order of placement
ACL3P103.65 x 134.80 x 103.65 x 35.00
quantity
a∙lightanium™
satin white
satin black
other - specify RAL#
no finish (t-bar or gyp)
custom
Row or Pattern Type:
for standard lengths available: see 'elements' specification sheet
R
nominal length row (specify in feet)
M
exact length row (specify in inches to nearest 100th”)
pattern options
"L" overhead - wall to ceiling
"L" horizontal/perimeter - wall to adjacent wall
"L" flat - wall only
"L" flat - ceiling only
"U" flat - wall only
"U" flat - ceiling only
"U" horizontal/perimeter - wall to wall to wall
"U" - wall to ceiling to wall
rectangle/square flat - wall only
rectangle/square flat - ceiling only
custom pattern
type
1
2
3
4
Finish:
T
W
B
O
C
Options:
D
E
F
M
N
C
O
P
K
Q
MRI
recessed
accoLED 5
____x____
____x____x____
____x____x____x____
for angles other than 90° use P and specify in submittals
Mounting:
flush gyp/hard lid - no finish
G
1" regressed gyp - optional finish
RG
trim flange - choose finish
XP
t-bar 9/16” - no finish
T
t-bar 15/16” - no finish
X
t-bar 9/16” slot - no finish
N
4” on center standard t-bar - no finish
T4
4” on center slot t-bar - no finish 5 N4
D
decoustics ceilencio® - no finish
shadowmold + flush gyp - no finish
Z
shadowmold + 9/16" t-bar - no finish
Y
shadowmold + 15/16" t-bar - no finish
U
shadowmold + 5" regressed gyp - optional finish
RG5
custom
C
LED Output:
LED standard output
LS
LED high output
LH
LED Temp:
3000k
30
3500k
35
4000k
40
Optics:
High Efficiency WISP™ lens (recommended) patent pending
S
HTLO™ lens
H
HTLO™ vertical
HTLO™ vertical + horizontal
universal 120V - 277V
347V (remote transformer required)
integrations
HE
WISP™ lens
HV
HVH
Voltage:
U
3
w w w.al i ghts .c om
Version | Nov 2014
4