Issue Date: May 2016
Project Ref:
Fixture/Location Ref:
ProSpex Gimbal Maxi
Gimbal Maxi Twin Trimless Fixture
The ProSpex fully adjustable trimless gimbal fixtures, ideal for high end retail
or hospitality applications where flexibility is required. Also available in single
and other multiple permutations, up to three modules as standard, that allows
uniformity in the ceiling of multiple heads in one recessed housing. Fully trimless
with integral flush mount kit for a seamless, clean ceiling line. The range utilises
many light sources including LED70 modules.
LED70 Ambiance
Product Description
• Caterpillar brackets fitted for commercial installation
• Separate mud-in kit for seamless flush installation
• Die cast double ring gimbal heads
• Integral compartment for electrical hardware
• Electrical compartment accessible through ceiling aperture
• Maximum tilt 35° in certain directions
• Cutout 14.44” x 7.55” (367 x 192mm)
• Tapered anti glare snoots as standard
• Each head accepts 2 media accessories
• Front loading lenses and louvres
• Black and White combinations as standard
A211-LED-TL
ProSpex Gimbal Maxi Twin Trimless for LED70 Series
LED Information
LED Type
Power
Luminous Output*
Luminous Efficacy*
Drive Current
CCT
CRI
Beam Options
Lamp Dimensions
Wiring
Max. Ambient Temperature
Ingress Protection
Weight
Driver Information**
XP-G2 and XT-E
26.9W
1696lm
63lm/W
1000mA Max.
2700K-2200K/3000K-2200K
≥80
14°/32°
H3.55” x Ø2.75”
2x wires with 2way connector
≤40°C
IP20
225g
*Figures based on a LED70 Ambiance module, 3000K-2200K with 32° beam
option. Beam options and colours will vary output.
Copyright © 2015 Lucent Lighting Inc.
Supply Voltage
120-277VAC
Power Factor
>0.95
Efficiency
87%
Operating Temperature
-25°C to 40°C
Max. Output Power
33W at 1000mA
Output Current
1000mA
Output Voltage
9-33V
Dimensions
L7” x W1.25” x D1.25”
Weight
120g
**Based on a Harvard Engineering CoolLED Non-Dimmable driver specified at
1000mA.
Emergency Lighting
Emergency packs available. Please enquire for more details.
Tel. New York: +1 518 239 8300
Tel. London: +44 (0)20 8442 0880
www.lucent-lighting.us.com
Page 01
Photometric Diagrams
LED70WD-830-14
LED70, 3000K, 14° at 1000mA
LED70WD-830-32
LED70, 3000K, 32° at 1000mA
Fixture Order Code:
A211-LED-TL
Fixture
A211-LED-TL
ProSpex Gimbal Maxi Twin Trimless for LED70 Series
Gimbal Finish
WH
BK
Housing Finish
WH
BK
Mud-in Kit Finish
WH
BK
Ceiling Thickness
12
58
75
C
Protocol
S
A
P
L
White
Black
White
Black
White
Black
1/2”
5/8”
3/4”
Custom
Switched
0-10V
TRIAC/Phase
Lutron 2-Wire
LED Module Order Code:
Lamp
LED70WD
CCT
827
830
Beam
14
32
LED70WD
LED70 Ambiance
80 CRI 2700K-2200K
80 CRI 3000K-2200K
14°
32°
Installation Information
ProSpex Gimbal Maxi can be used in Non-IC/IC/Airtight/CCEA ceilings. Not suitable for installations where ambient temperatures exceed 40°C.
Aftercare and Maintenance
Isolate the fixture from the mains voltage supply and allow fixture to cool down before attempting any maintenance task. Safety gloves and eye protection should
be used when inspecting the fixture or when changing the lamp/s. Lucent recommend that the fixture be inspected and cleaned/dusted every 12 months with
a dry cloth to maximize the effectiveness of the luminaire and to reduce the risk of fire.
Warranty Information
All fixtures supplied by Lucent Lighting Inc. are covered by a one year standard warranty. In most cases this warranty can be extended up to five years on
application.
Copyright © 2015 Lucent Lighting Inc.
Tel. New York: +1 518 239 8300
Tel. London: +44 (0)20 8442 0880
www.lucent-lighting.us.com
Page 02
Installation Instructions
For Insulated and Non-Insulated Ceiling type installations
!
MAINS POWER TO BE SWITCHED OFF
DURING INSTALLATION.
C
1. Fixing of housing
2. Plasterboard installation
Cutout (C): 14.44” x 7.55” (367 x
192mm)
3. Trimless mud in kit installtion
4. Mud in and allow to dry fully
5. Paint and allow to dry fully
6. Dropdown of power supply
7. Fixture wiring connection
8. Power supply re-installation
9. Align fixture with trimless kit and
Install
10. Finished Installation
1. Adjust tilt
Copyright © 2015 Lucent Lighting Inc.
Tel. New York: +1 518 239 8300
Tel. London: +44 (0)20 8442 0880
www.lucent-lighting.us.com
Page 03