DR.CSKRISHNA PRASAD RAO, M.Tech, Ph.D Name of the

advertisement
Name and Qualifications: DR.C.S.KRISHNA PRASAD RAO, M.Tech, Ph.D
Name of the faculty
DR.C.S.KRISHNA PRASAD RAO
Date of Birth
20/05/1954
Designation
Dean And Professor
Years of Experience
38
Department
Mechanical Engineering
Email Id
deanadmin@biet.ac.in
Phone Number
08414-252313
Faculty web Page
Employment Status
Full Time, JNTUH Ratified
Areas of Specialization
Production Engineering, Metal Forming
UG Degree
B.E (Mechanical)
PG Degree
M.Tech, PGTE
Ph.D
Ph.D
Subjects Taught
1. MACHINE TOOLS
2. PRODUCTION TECHNOLOGY
3 RAPID PROTOTYPING
4. DESIGN FOR MANUFACTURING
Papers published
INTERNATIONAL JOURNALS
1. C.S. Krishna Prasada Rao, Srinivasulu.M and M. Komaraiah, “Experimental
investigations on the surface roughness of AA 6082 flow formed tubes – a taguchi
approach”. International Journal of Applied Engineering Research ISSN, Vol. 6, No 4,
Nov 2011, PP 523-532.
2. C.S. Krishna Prasada Rao, Srinivasulu.M and M. Komaraiah, “Experimental
investigations to predict mean diameter of AA6082 tubes in flow forming process – A
DOE approach”, International Organization for Science and Research Journal of
Engineering (IOSRJEN) ISSN: 2250-3021, Vol. 2, Issue 6, June 2012, PP 52-60.
3. C.S. Krishna Prasada Rao, Srinivasulu.M and M. Komaraiah, “Experimental studies on
the characteristics of AA 6082 flow formed tubes. Journal of Mechanical Engineering
Research (JMER) ISSN 2141-2383, Vol. 4(6), Oct 2012, PP 192-198.
4. C.S. Krishna Prasada Rao, Srinivasulu.M and M. Komaraiah, “Application of response
surface methodology to prdict Ovality of AA 6082 flow formed tubes. International
Journal of Manufacturing, Material and Mechanical Engineering (IJMMME) ISSN 21561680, EISSN:2156-1672, Vol. 3(1), Mar 2013, PP 52-65.
5. C.S. Krishna Prasada Rao, Srinivasulu.M and M. Komaraiah, “Prediction of the surface
roughness of AA 6082 flow formed tubes by Design of Experiments”. Journal of
Mechanical Science and Technology (JMST) ISSN 1226-4865, Vol. 27(6), July 2013, PP
1835-1842.
6. C.S. Krishna Prasada Rao, Dr. P Uday Bhaskar and B. Navyasree, “ Implementation of
fuzzy predictive control scheme for enhancement of power quality in distributed
generation”. International Journal of scientific engineering and technology research
(IJSETR) ISSN2319-8885, vol. 03, issue 45, December 2014,PP 9131-9136.
7. Dr. C.S. Krishna Prasada Rao, J Balaraju, Anup Kumar Jana,”Application of taguchi
technique for identifying optimum surface roughness in CNC end milling process”.
International journal of engineering trends and technology (IJETT), VOL.21,NO2,March-2015,PP 18-25.
JOURNALS
1. C.S. Krishna Prasada Rao and M. Komaraiah, “Computer aided numerical control
manufacture of thin walled medium carbon alloy steel components by flow forming
process,” Mechanical Engineering journal of the institution of Engineers, India, Calcutta,
Vol. 81, March 2001, PP 65-67.
2. C.S. Krishna Prasada Rao and M. Komaraiah, “Experimental study of wear on the rollers
used in flow forming of different materials”, Paper sent for publication in wear journal,
Banbury Road, Oxford, United Kingdom, Feb. 2000. (Communicated)
3. C.S. Krishna Prasada Rao and M. Komaraiah, “Some investigations on flow-formed
components by CNC flow-forming process”, Paper sent for publication in International
journal of production Research, Loughborough, United Kingdom, Nov. 2000.
(Communicated).
4. C.S. Krishna Prasada Rao and M. Komaraiah, “Quality aspects in computer aided
numerical control manufacture of thin walled low carbon steel components by flow
forming process”, Paper sent for publication in Udyog Pragathi journal of National
Institute of Training in Industrial Engineering, NITIE, Bombay, Dec. 1999
(Communicated).
5. C.S. Krishna Prasada Rao and R. N. Desai “ Protection of Intellectual property rights in
India “, National Journal of small enterprises development, management and extension
(SEDME), Volume-30, No. 1, March 2003, PP 25-32
6. C.S. Krishna Prasada Rao “Stress Analysis in Flow formed Components Using Finite
Element Technique”, Staff Development Programme on recent Developments in
manufacturing Technologies, Volume-1, December 2003, PP 33F-41F.
7. C.S. Krishna Prasada Rao “Role of Metrology in quality improvement in manufacture of
thin walled components by flow forming process”. Staff Development programme on
advances in manufacturing processes, Volume-I, Aug 2008, PP 22-32.
8. C.S. Krishna Prasada Rao “Optimisation of process parameters for flow forming of
SAE-4130 steel- a Taguchi method”. Journal of Aero space Quality and reliability,
Volume-3(2), Volume-4(1&2), Volume-5(1), January 2009, and PP 30 - 36.
9. C.S. Krishna Prasada Rao, Lakshman Rao .M & Rao.T.V.L.N. “A study on influence of
flow forming parameters in manufacture of copper tubes”. Journal of Manufacturing
Engineering, Volume-5(1), 2009, PP 69-71.
10. C.S. Krishna Prasada Rao, “Documentation for Missile Systems”, Technical Journal of
Bharat Dynamics Limited, Hyderabad, Issue No. 39, Dec 2013, PP 8-10
TECHNICAL REPORTS
1. C.S. Krishna Prasada Rao, Technical Report on Compendium of technologies – flow
forming is prepared and sent to ministry on 20-01-2000.
2. C.S. Krishna Prasada Rao, Technical Report on manufacturing facilities available in M/S
Bharat Dynamics Limited.
3. C.S. Krishna Prasada Rao, Technical Report on Special Technologies available in
different Defence PSU‟S.
4. C.S. Krishna Prasada Rao, Technical Report on Center of Excellance-Flow forming
facility.
5. C.S. Krishna Prasada Rao, Technical Report on Export potential of M/S Bharat Dynamics
Limited.
6. C.S. Krishna Prasada Rao, Technical Report on Research and Development capabilities
of M/S Bharat Dynamics Limited.
7. C.S. Krishna Prasada Rao, Technical Report on QT/AT of Welded
Brackets – I.
8. C.S. Krishna Prasada Rao, Technical Report on QT/AT of Welded
Brackets – II.
9. C.S. Krishna Prasada Rao, Technical Report on QT/AT of Electrical Connector
Brackets – I.
10. C.S. Krishna Prasada Rao, Technical Report on QT/AT of Electrical Connector
Brackets – II.
11. C.S. Krishna Prasada Rao, Technical Report on QT/AT of fasteners.
12. C.S. Krishna Prasada Rao, Technical Report on establishment of future projects.
13. C.S. Krishna Prasada Rao, Technical Report, Preliminary project report on SAM.
14. C.S. Krishna Prasada Rao, Technical Project Report on SR-SAM project.
15. C.S. Krishna Prasada Rao, Technical Report of Technical evaluation committee – SRSAM
16. C.S. Krishna Prasada Rao, Technical Report on TEC sub-committee on scope of work for
SR-SAM project.
17. C.S. Krishna Prasada Rao, Technical Report of production plan document for SR-SAM
18. C.S. Krishna Prasada Rao, Technical Report of Cable Harness.
INTERNATIONAL CONFERENCES
1. C.S. Krishna Prasada Rao and M. Komaraiah, “Manufacture of thin walled medium
Carbon alloy steel tubes by flow forming process”, International Conferences on
Advances in Mechanical Engineering and Research, ICAMER, Vol.1, Dec.95, IISC,
Bangalore, PP 659-666.
2. C.S. Krishna Prasada Rao and M. Komaraiah, “Manufacture of thin walled Aluminum
alloy tubes by flow forming process”, International Conference on Precision Engineering,
20-22 Nov. 1997, National Taiwan University, Taipei, Taiwan, Republic of China, PP
220-226.
3. C.S. Krishna Prasada Rao and M. Komaraiah, “Flow forming of thin walled tubes in
Aluminum alloy”, Fourth Annual International Paper meet, the Institution of Engineers,
23-25 Oct. 97, Ramna, Dhaka, Bangladesh, PP 402-405.
4. C.S. Krishna Prasada Rao and M. Komaraiah, “Computer aided numerical control
manufacture of thin walled Copper Cones by flow forming process”, 14th International
Conference on CAD/CAM, Robotics, Factories of future 98 Nov. 30. Dec 1-3 „98‟ at
PSG College of Technology Coimbatore, PP 769-779.
5. C.S. Krishna Prasada Rao and M. Komaraiah, “Comparative study of wear on the rollers
during flow forming of different materials”, International Conference on Industrial
Tribology 1st to 4th Dec. 99, at BHEL, R & D, Hyderabad PP 291-298.
6. C.S. Krishna Prasada Rao and M. Komaraiah, “Computer aided monitoring and analysis
of sheet metal working operations with force transients,” International Conference on
Industrial Tribology. 1st to 4th Dec 99 at BHEL R & D Hyderabad PP 513-518.
7. C.S. Krishna Prasada Rao and M. Komaraiah, “Temperatures developed during flow
forming of different materials by CNC flow forming process,” 16th international
conference on CAD/CAM, Robotics and factories of the future 26th to 28 June 2000, at
the university of the West Indies, St. Augustine, Trinidad, West Indies.
8. C.S. Krishna Prasada Rao, Srinivasullu.M & Komarai.M, “ Experimental investigations
on thickness variations of AA 6082 flow formed tubes- a Taguchi approach”, 3rd
International and 24th AIMTDR, All India Manufacturing Technology, Design and
Research conference, at Andhra University College of Engineering, Vishakhapatnam,
A.P, 13 - 15 Dec 2010, Vol. 2, PP 1223-1228.
9. C.S. Krishna Prasada Rao, Srinivasullu.M & Komarai.M, “Experimental studies on the
ovality of AA 6082 flow formed tubes – a Taguchi method.” 2nd International Conference
on Production and Industrial Engineering, CPIE – 2010, 2010, PP 192-197.
10. C.S. Krishna Prasada Rao, Srinivasullu.M & Komarai.M “Effect of process parameters on
the mean diameter of AA6082, flow formed tubes-an experimental investigation”.5th
international and 26th all India manufacturing technology, Design and research conference
(AIMPDR). At, IIT Gwahati,Assam, on 12th to 14th December 2014, PP-664-1-664-6.
11. C.S. Krishna Prasada Rao,Dr. G. Surya Prakash Rao” The Bhagwat Gita principles helps
in nurturing creativity in global leaders, spirituality and creativity in management,
challenges for the future” ESADE BUSINESS SCHOOL-ABIS-world congress,
Bercelona,Spain,23 to 25th April 2015.
NATIONAL CONFERENCES
1. C.S. Krishna Prasada Rao, “New trends in manufacturing - flow forming” symposium of
manufacturing technologies for the nineties, Nov. 91, PP-205-208.
2. C.S. Krishna Prasada Rao and M. Komaraiah, “Solid Rocket motor casings for ATGM by
metal forming of high strength low alloy steel”. National seminar on advancements in
Anti - tank guided missile systems, 6 -7th May 94, at Bharat Dynamics Limited,
Hyderabad, PP 64-66.
3. C.S. Krishna Prasada Rao, “Manufacture of thin walled Aluminum tubes by flow forming
process”, National Conference on quality Engineering in Aerospace Technologies 27-28
Oct, 95, at DRDL Hyderabad, PP 34-38.
4. C.S. Krishna Prasada Rao and M. Komaraiah, “Manufacture of thin walled low carbon
alloy steel tubes by flow forming process,” 17th All India Manufacturing Technology
Design and Research Conference, 9-11 Jan. 1997, at REC Warangal, PP 471-474.
5. C.S. Krishna Prasada Rao and M. Komaraiah, “Manufacture of thin walled Aluminum
alloy tubes by flow forming process,” National Conference on Intelligent Manufacturing
Systems - A Technology Watch, 6-7 Feb.98, at Coimbatore Institute of Technology,
Coimbatore, PP 40-45.
6. C.S. Krishna Prasada Rao and M. Komaraiah, “Manufacture of thin walled Aluminum
alloy tubes by flow forming process”, All India Seminar on Design of Production
Systems - New Concepts, Jul. 98, The Institution of Engineers, India, Bhubaneshwar, PP
76-84.
7. G. Chandra Mohan Reddy, C.S. Krishna Prasada Rao and M. Komaraiah, “Condition
monitoring of metal forming Operations using load cells interfaced to computer”, All
India Seminar on Design of Production Systems - New Concepts, Jul. 98, The Institution
of Engineers, India, Bhubaneshwar, PP 1-4.
8. C.S. Krishna Prasada Rao and M. Komaraiah, “Computer aided numerical control
manufacture of thin walled Aluminum alloy Components by flow forming process,” 18th
all India manufacturing technology, Design and Research conference, Dec. 21-23 1998,
at IIT Kharagpur, PP 72-76.
(Best paper Award of Merit Certificate and cash award was received
for this paper.)
9. C.S. Krishna Prasada Rao and M. Komaraiah, “A comparative study of residual stress
measurement on flow formed Components”, 11th Indian society of Mechanical Engineers
National Conference on Mechanical Engineering, 3rd to 5th Feb. 1999, at IIT, Delhi, PP
393 - 399.
10. C.S. Krishna Prasada Rao and M. Komaraiah, “Quality aspects in Computer aided
numerical control manufacture of thin walled Aluminum alloy Components by flow
forming process,” National Conference on Quality Engineering in Aero Space
Technologies, QUEST 99. 20th, 21st, August 1999, at HAL Bangalore,
PP 7 - 11.
11. C.S. Krishna Prasada Rao and M. Komaraiah, “Stress analysis in flow formed
components using finite element technique”, 15th national convention of mechanical
engineers, 16th to 18th December 1999, at the institution of engineers, India, Hyderabad,
PP 217 to 222.
12. C.S. Krishna Prasada Rao and R.N. Desai, “Adoption of COTS Technology in Missile
Industry”:, National Conference Adoption of COTS Technology in Engineering
equipment, 20th July, 2001, at BDL Hyderabad, PP51-53.
13. C.S. Krishna Prasada Rao and R.N. Desai., “ Protection of Intellectual property rights in
India”, National conference on recognition, protection and securitisation of Intellectual
property, 28th ,29th November, 2002, at Nisiet, Hyderabad.
14. C.S. Krishna Prasada Rao and G. Venkata Rao “Stress Analysis in flow formed
components using finite element technique”, 20th All India Manufacturing Technology,
Design and Research Conference, 13-15 December 2002, at BITS Ranchi, PP 253-258.
15. C.S. Krishna Prasada Rao and M. Komaraiah “Role of Metrology in Quality
improvement in manufacture of thin walled Aluminium alloy components by flow
forming process” , National conference on advances in metrology for manufacturing
technology, 7th, 8th Feb. 2004, at the Institution of Engineers, India, Durgapur,
PP
20 – 30.
16. C.S. Krishna Prasada Rao, “ section casings for guided Missiles by metal forming of
aluminum alloy”, National seminar on advances in Missile systems, June 2004, at Bharat
Dynamics Limited, Hyderabad.
17. Dr. C.S. Krishna Prasada Rao “A Theoretical study on Prediction of Mechanical
properties of Tube Spinning process” proceedings of the National Conference on
Advances in Mechanical Engineering, 18-19 March 2006,at Engineering College Kota ,
Kota Rajastan, PP 241-247.
18. Dr. C.S. Krishna Prasada Rao “Stress Analysis in Flow formed Tubes by FEM using
Ansys-5.4 Software” proceedings of the 22nd Indian Engineering Congress on
Globalization: Engineering and Technological Challenges, 14-16 December, 2007, at The
Institution of Engineers (India), Udaipur, PP 49-53.
19. Dr. C.S. Krishna Prasada Rao “Optimization of process parameters on Flow forming of
SAE 4130 steel – A Taguchi method”, 3rd National Conference on quality and reliability
in Aero space Technologies, REQUEST 2008, at ADE, Bangalore, PP 30-36.
20. Dr. C.S. Krishna Prasada Rao “Experimental studies on flow forming of SAE 4130 steel
– A Taguchi approach”, National conference on aero space engineering, NCAE 2009, at
CMR Hyderabad, PP155-158.
21. Dr. C.S. Krishna Prasada Rao “Effect of process parameters on the surface finish of
AA6082 flow formed tubes”, National conference on advances in manufacturing
technology and management, 30-31st Aug 2010, AMTM 2010, at JNTU college of
engineering, Hyderabad, PP 40-44.
22. Dr. C.S. Krishna Prasada Rao, Srinivasulu.M & Komarai.M, “ Effect of process
parameters on the ovality of AA 6082 thin walled flow formed tubes”, National
conference on Advances in Mechanical Engineering NAME-2010 , at Jawaharlal Nehru
National College of Engineering, Shimoga, Karnataka, 24-25 September 2010,
PP
510-515.
23. Dr. C.S. Krishna Prasada Rao, Srinivasulu.M & Komaraiah.M, “ Effect of process
parameters on the Mean diameter of AA6082 flow formed tubes – An experimental
investigation”, National Seminar on Trends in Non- Traditional Machining at the
Institution of Engineers(India), A.P state centre, Hyderabad, 05 Jan 2013. PP 69 – 78.
24. Dr. C.S. Krishna Prasada Rao, “ Standardisation and Design practices in Defence
Industry”, National Conclave on Industry – Academia at Bharat Dyanamics Limited,
Kanchanbagh, Hyderabad, 14th .Dec 2013.
25. Dr. C.S. Krishna Prasada Rao, “ Advanced Manufacturing Technology – Flow forming”,
National Seminar on Advances in manufacturing processes, AMP-13, at Koneru
Lakshmaiah College of Engineering, KL University, Guntur, A.P,
21st Dec
2013
26. Dr. C.S. Krishna Prasada Rao, “ Advanced Manufacturing Technology – Forming”
National Workshop on advanced manufacturing Processes, at Maheshwara Institute of
Technology, patancheru on 26th Feb 2014.
27. Dr. C.S. Krishna Prasada Rao, “ Advanced Manufacturing Technology”, Inauguration of
technical festival SCIENTIUM 2014 as guest of Honour, National Conference on
“Advanced Manufacturing Engineering” at Bhaskara Engineering College, Hyderabad on
10th Mar 2014.
28. Dr. C.S. Krishna Prasada Rao, “ Advanced Manufacturing Technology”, National
technical festival MECHRENA 2014, “Advanced Manufacturing Science” at University
College of Engineering, Osmania University , Hyderabad on 14th Mar 2014.
29. Dr. C.S. Krishna Prasada Rao, “ Advanced Manufacturing Technology”, National
Workshop on “Advanced Manufacturing Technologies” at Bharat Institute of
Technology, Ibrahimpatnam, Hyderabad on 24th Mar 2014.
30. Dr. C.S. Krishna Prasada Rao” Role of documentation for weapon systems”, National
conference on fast emerging trends in engineering and technology”(NCOFET)-2015.At,
Bharat Institute of Technology, Ibrahimpatnam, Hyderabad on 25th and 26th Mar 2015, PP
153-155.
31. Dr. C.S. Krishna Prasada Rao, J Balaraju, Anup Kumar Jana,”Application of taguchi
technique for identifying optimum surface roughness in CNC end milling process”.
National conference on fast emerging trends in engineering and technology”(NCOFET)2015.At, Bharat Institute of Technology, Ibrahimpatnam, Hyderabad on 25th and 26th Mar
2015, PP 187-195.
32. Dr. C.S. Krishna Prasada Rao, Dr. P Mallesham ”New trends in Aircraft maintenance”
National conference on fast emerging trends in engineering and technology”(NCOFET)2015.At, Bharat Institute of Technology, Ibrahimpatnam, Hyderabad on 25th and 26th Mar
2015, PP 295-301.
33. C.S. Krishna Prasada Rao, Dr. P Uday Bhaskar and B. Navyasree, “ Multilevel permanent
magnet synchronous motor drive-analysis of high performance” National conference on
fast emerging trends in engineering and technology”(NCOFET)-2015.At, Bharat Institute
of Technology, Ibrahimpatnam, Hyderabad on 25th and 26th Mar 2015, PP 212-217.
34. C.S. Krishna Prasada Rao, Dr. P Uday Bhaskar and B. Navyasree, ”Implementation of
predictive control scheme for improving power quality in distributed generation” National
conference on fast emerging trends in engineering and technology”(NCOFET)-2015.At,
Bharat Institute of Technology, Ibrahimpatnam, Hyderabad on 25th and 26th Mar 2015, PP
218-224.
INVITED LECTURES GIVEN
1. A lecture on “Value Engineering- A Modern Management Tool “, at Institution of
Engineers (India), A.P. state center, Hyderabad on 27-08-1991.
2. A Lecture on “Advanced Metal forming - Computer aided numerical control manufacture
of thin walled medium carbon alloy steel components by flow forming process”, at
Institution of Engineers (India), AP state center, Hyderabad, on 08-02-1999.
3. A lecture on “Advanced Metal forming - Computer aided numerical control manufacture
of thin walled low carbon alloy steel components by flow forming process”, at Indian
Institute of metals, Hyderabad chapter at DMRL, Hyderabad on 04-06-1999.
4. A lecture on “Advanced Metal forming - stress analysis in flow formed components using
finite element technique” at Institute of systems technology and management, Bharat
Dynamics Limited, Hyderabad on 06-04-2000.
5. A lecture on “Advanced Metal forming - stress analysis in flow formed
components
using finite element technique” at Short term training Programme on advanced metal
working techniques as finite element Simulations in metal forming at CBIT, Hyderabad,
on
07-07-2003.
6. A lecture on “Recent developments in manufacturing technology - Flow Forming” at
AICTE sponsored staff development programme at MVSR Engineering College,
Hyderabad on 20-12-03.
7. A lecture on “Advanced Metal Forming Science – Flow Forming” at VNR, Vignana
Jyothi Institute of Engineering and Technology, Hyderabad on 03-03-2006.
8. A lecture on “Advances in Manufacturing Processes- 2008” TEQIP, NITW sponsored
staff development programme at National Institute of Technology, Warangal on
1008-2008.
9. A lecture on “Standardization in Defence PSU – Bharat Dynamics Limited” SAE
International at Aerospace Standards workshop, Hyderabad on 07.06.2012.
10. A lecture on “Over view of Design practices in Engineering Industry” at NNR
Engineering College, Hyderabad on 17.08.2013.
11. A Lecture on “Current Trends in Manufacturing in Production Industry” at Central
Institute of Tool Design, Hyderabad on 13/11/2014 for Directors and M.Tech students.
BOOK PUBLISHED
1. Prepared a Book on compendium of Technologies available in M/s Bharat Dynamics
Limited.
Download