LUCERNA
SPECIFICATION GUIDE
Architectural Lighting Works reserves the right to make changes to fixture design, finish and engineering at any time.
www.alwusa.com
LUCERNA
Page 1 of 2
TYPE:
Specification and Ordering Information:
1. Style:
LUC - Lucerna Round Reflector (LUC)
LUCSQ - Lucerna Square Reflector (LUCSQ)
LUCL - Lucerna Lens Only (LUCL)
2. Configuration
1 - Single (1)
2 - Double(2)
3 - Triple (3)
3. Reflector Finish (Leave Blank if Lens Only):
D - Specular (D)
DM - Matte Diffuse (DM)
4. Interior Lamping:
18 - 2 x 18 PL-C fluorescent (18)
26 - 2 x 26W PL-C fluorescent (26)
RGB - 14 Watt LED color-changing RGB (LED)
CV450- Decorative, 440 Lm/ft, Constant Voltage LED 6.5W/LF (CV450)
3000K
4000K
Raw lumen and system watts
5. Driver/Ballast Specification
1
8 4"
STD - Standard (STD) - Electronic, non-dim <10%THD (STD)
MK7 - Advance Mark 7® Dimming 0-10V (MK7)
MK10 - Advance Mark 10® Dimming (MK10)
*LED - LED Power Supply, non-dim (LED)
**LED-DIM - LED Power Supply with 0-10V dimming (LED-DIM)
10% Standard Option
1% Premium Option
**Remote Power Supply REQUIRED
1
8 16"
3
3
8 4"
6. Option - Downlight (Leave Blank if None):
LED MR16: Retrofit LED MR16 GU3.5 Base, Transformer: 120 volt to
12 volt only for dimming, lamp supplied by others, 20W max (LEDMR16)
3
8 4"
14"
8 4"
19"
7. Voltage:
* 120 - 120 volt (120)
277 - 277 volt (277)
UNV - Universal voltage (UNV) (non-dim only)
347 - 347 volt (not available in dimming) (347)
* LED MR16 is 120V only
8. Finish:
3
3
8 4"
3
8 4"
3
8 4"
3
8 4"
3
8 4"
8 4"
14"
19"
WH (White powdercoat)
BK (Black powdercoat)
AL (White powdercoat)
RAL (Specify RAL # of powdercoat of your choice)
* WH is standard on all Lucerna product
LUCERNA - 1
18 - 2 x 18 PL-C fluorescent (18)
26 - 2 x 26W PL-C fluorescent (26)
CV450- Decorative, 440 Lm/ft,
Constant Voltage LED 13W
(CV450)
9. Option - Emergency
REMBP - Remote Emergency Battery Pack (REMBP)
10. Accessory Option (Leave Blank if no downlight selected):
*Hex - Hexcell Louvers (HEX)
*SNOOT - Snoot (SNT)
*SOL - Solite Lens (SOL)
*LSS - Linear Spread Lens (LSS)
*All louvers for MR16 Downlight Option Only
All lenses are regressed
Relamping is from front (entire flange with lens removes as one solid piece)
Downlight is not adjustable and will accept 1 accessory (MR16 halogen only)
LUCERNA - 2
18 - 3 x 18 PL-C fluorescent (18)
26 - 3 x 26W PL-C fluorescent (26)
CV450- Decorative, 440 Lm/ft,
Constant Voltage LED 19.5W
(CV450)
LUCERNA - 3
18 - 4 x 18 PL-C fluorescent (18)
26 - 4 x 26W PL-C fluorescent (26)
CV450- Decorative, 440 Lm/ft,
Constant Voltage LED 26W
(CV450)
Architectural Lighting Works reserves the right to make changes to fixture design, finish and engineering at any time.
www.alwusa.com
3
8 4"
3
8 4"
3
8 4"
14"
3
8 4"
19"
LUCERNA
Page 2 of 2
TYPE:
Design Specifications
Construction
18 gauge CRS inner and outer housings.
Titanium high white powdercoat interior housing.
Lens diffuser made from 1/16” holographic, light-shaping acrylic.
Reflectors are spun and polished aluminum
Electrical Details
All Ballasts are Electronic <10% THD
Class P electronic ballasts - Programmed start
Standard and dimming ballasts are integral to housing (unless otherwise noteLow voltage transformers are individual 75W units
(277V/12V or 120/12V)
LED options available (consult factory)
Multiple interface options with systems such as DALI and multiple
dimming ballast options available
ETL Listed
Chicago Plenum Rated
Indoor Location Only
Emergency
Fixtures can be wired for Emergency circuit or Emergency battery
backup.
Emergency ballasts provide 90 minutes of illumination
T5/T5HO = Initial output of 1300 Lumens
Remote test switch supplied
Finish
Trim/flange detail is high-pressure, cast aluminum with matte white
powdercoat finish.
AL trim is a supersonic chrome powdercoat finish.
Powder Coat options are available. Consult factory.
ACROSS
45
ALONG
Spacing Criterion
1.4
1.4
Efficiency
25.0 %
75
150
Catalog # LUC-1-D-26-STD-120
225
Architectural Lighting Works reserves the right to make changes to fixture design, finish and engineering at any time.
www.alwusa.com