G-Beam Series GHD16R GAMMALUX General Illumination - Integrated with Baffle Ceiling System Direct Distribution Lighting Systems Perfection by Extrusion Revision: 3 Date: Aug. 2013 CLICK FOR Click photo to view product page deep box 6 COMPATIBLE PRODUCT Click or scan QR code to view HUNTER DOUGLAS spec sheet.SERIES latest HIGH PROFILE Page 2 Specifications Page 3 Photometric Files Page 4 Mounting Details CLICK FOR baffle Ceiling system COMPATIBLE PRODUCT CLICK FOR GAMMALUX Gammalux Lighting Systems reserves the right to change details of fixture designs and construction at any time. T5 or T5HO STANDARD PRODUCT VERSION Product Overview (for complete specifications, see page 2) :NOYVXUJ[IZOYSGXQKZKJK^IR[YO\KR_ ZNXU[MN.[TZKX*U[MRGY)ROIQNKXK UXIGRRLUXIUTZGIZ GTJIKOROTMY_YZKSOTLUXSGZOUT Construction: For use in Hunter Douglas High Profile Series™ Baffle ceiling systems only. Extruded aluminum housing is available in one piece up to 20’. Runs of fixtures are built to lengths matching exact field dimensions. Telescoping modules are not acceptable. Factory-engineered drawings indicate the location of each board in continuous runs. Electrical: Gammalux products are UL and cUL listed with quick electrical connectors and ballasts by OSRAM SYLVANIA or equal. Runs of fixtures are tested as a complete system prior to shipping. Daylight Harvesting available. Optical: Three snap-in lens versions are offered to allow for greater glare control or increased fixture efficiency. Finish/Color: High quality paint finish matches Hunter Douglas standard. Packing and Shipping: Our packing, labeling and shipping systems ensure products arrive safely, ready to install. Purchasing: This product is marketed exclusively through Hunter Douglas. Click here or call 800-727-8953 for contact and ceiling system information. Mounting: For use in Hunter Douglas High Profile Series™ Baffle ceiling systems only. Standard suspension components are provided by Hunter Douglas. If required by local building code or structural engineer, supplemental suspension kit # GHDB-SSK can be obtained from Hunter Douglas. See page 4. Standard Nomenclature Manufacturer Gammalux Ballast Option No. of Lamps Cross Section (nom) 1 1.00” x 6.00” Shape Rectangular GHD16R Partner Hunter Douglas Nominal Lamp Watts 28 (4’-T5) 54 (4’-T5HO) LED available (consult factory) 128T5 Lamp Type T5 T5HO ERS Electronic Rapid Start <10% THD DIM Dimming (consult factory) DAY Daylight Harvesting (consult Gammalux for assistance) 120V Voltage 120, 277, UNIV *Lamp is visible through clear APL and ACL lenses. Mounting Hunter Douglas Baffle Ceiling Integration (Standard suspension components by Hunter Douglas. Supplemental suspension kit available. See page 4.) ERS 4’ Fixture Length Up to 20' single-piece housings available. Specify run in nominal footage increments. HDB Paint Colors NAT Gammalux match of Hunter Douglas Natural # 7163 COT Gammalux match of Hunter Douglas Cotton White # 0280 ASL Paint Finish H High Gloss SG Semi-Gloss WH XX Lower Sheilding * ASL Acrylic Satin Lens APL Acrylic clear Lineal Prismatic Lens ACL Acrylic Coextruded Lens Options GLR Fuse w/holder BPE Battery Pack EM. Kit DL UL Damp Label EMERG Emergency ckt. 2CKT Dual Circuiting 248 East Arrow Highway, San Dimas, CA 91773 Tel 909.599.9669 800.356.3275 Fax 909.599.5288 E-mail: info@gammalux.com Gammalux products comply with ARRA Buy American requirements. 1 GAMMALUX G-Beam Series GHD16R General Illumination - Integrated with Baffle Ceiling System Direct Distribution Lighting Systems Specifications Perfection by Extrusion Construction Housing: Extruded aluminum body 1.50” wide x 6.35” high, 6063T5, 0.070” minimum thickness. Available in one piece, unbroken lengths up to 20’. Runs of fixtures are built to lengths matching exact field dimensions. Telescoping modules are not acceptable. CLICK FOR Joiner System: Automatic alignment, no loose parts, one tool to tighten two factory installed bolts for hairline seam. No light leaks. Fixtures that are built for continuous runs are assembled into a complete run and tested for fit and finish at the factory prior to being individually packed and shipped. deep box 6 Mounting: Shall be integrated with Hunter Douglas Baffle Ceiling System. Standard mounting components by Hunter Douglas. If required by local code or structural engineer, supplemental support kit # GHDB-SSK, containing two mounting brackets, may be obtained through Hunter Douglas. Electrical COMPATIBLE PRODUCT Ballast: OSRAM SYLVANIA or equal Electronic Rapid Start ballast with less than 10% Total Harmonic Distortion is standard (specify ERS). Additional ballast options are available. UL listed wiring and components throughout. Housing wired with quick-connect plugs at all mating joints and individually tested. Max ballast cross section size 1.7” x 1.2”. Fixtures that are built for continuous runs are assembled into a complete run and tested with lamps at the factory prior to being individually packed and shipped. All fixtures bear UL & cUL Dry Location labels. Damp Location labels are available (specify DL in the options field). CLICK FOR HUNTER DOUGLAS Daylight Harvesting: On-board sensor controls single or multiple fixtures to take advantage of ambient illumination from daylight and other sources (specify DAY). Consult Gammalux for assistance in proper arrangement of fixtures with sensors. 800-356-3275. Optical Performance HIGH PROFILE SERIES baffle Ceiling system COMPATIBLE PRODUCT Acrylic Satin Lens: Satin white snap-in lens shall be 15% DR acrylic (specify ASL). Acrylic Prismatic Lens: Clear acrylic snap-in lens includes linear micro prism. Shall be 15% DR (specify APL). Acrylic Coextruded Lens: Snap-in lens is a co-extruded combination of APL for maximum output down and ASL for glare reduction to the sides (specify ACL). Finish CLICK FOR Housing assembly is electrostatically sprayed with high solids aliphatic two component polyurethane to an average thickness of 2 mils. over acid etching primer. High gloss or semi-gloss are standard. Specify H for high gloss in Paint Finish field. Specify SG for semi-gloss. Consult with factory for other finishes. Packing and Shipping GAMMALUX STANDARD PRODUCT VERSION Fixtures built for continuous rows are given a specific location identifier, clearly identified on factory layout drawings provided to installing contractor. Location identifier is printed on the fixture’s ID Label, protective wrapping and on each end of fixture carton. Shipping pallets are built with 2” clearance, extending beyond the length and width of cartons, providing shipping protection. Approximate weight of 4' module is 10 lbs. including carton. Weight of shipping pallet and supplemental packing materials not factored in. CLICK FOR deep box 6 COMPATIBLE PRODUCT :NOYVXUJ[IZOYSGXQKZKJK^IR[YO\KR_ ZNXU[MN.[TZKX*U[MRGY)ROIQNKXK CLICK FOR UXIGRRLUXIUTZGIZ HUNTER DOUGLAS HIGH PROFILE SERIES GTJIKOROTMY_YZKSOTLUXSGZOUT baffle Ceiling system COMPATIBLE PRODUCT CLICK FOR GAMMALUX STANDARD PRODUCT VERSION :NOYVXUJ[IZOYSGXQKZKJK^IR[YO\KR_ ZNXU[MN.[TZKX*U[MRGY)ROIQNKXK UXIGRRLUXIUTZGIZ GTJIKOROTMY_YZKSOTLUXSGZOUT 248 East Arrow Highway, San Dimas, CA 91773 Tel 909.599.9669 800.356.3275 Fax 909.599.5288 E-mail: info@gammalux.com Gammalux products comply with ARRA Buy American requirements. 2 GAMMALUX Lighting Systems Perfection by Extrusion IESNA: LM-63-2002 ISSUEDATE: 12/29/11 TEST: GH16R1T5ASL.IES TESTLAB: photopia 3.2.6 see: www.ltioptics.com/ies MANUFAC: GAMMALUX LIGHTING SYSTEMS LUMCAT: GH16R-128T5-ASL LAMPS: 1 FLUOR 28W 4’ SILHOUETTE T5 Summary Data EFFICIENCY (Total): EFFICIENCY (Downlight): EFFICIENCY (Uplight): CIE CLASSIFICATION: LUMENS/LAMP: NO. OF LAMPS: LUMINOUS OPENING: Width: Length: Height: INPUT WATTS: 76.9% 65.6% 11.3% SEMI-DIRECT 2900 1 RECTANGULAR 0.13 (Feet) 3.83 0.31 31 G-Beam Series GHD16R General Illumination - Integrated with Baffle Ceiling System Direct Distribution Photometric / Revit files Fixture with ASL shielding* ASL 1 CANDELA Candela Plot Summary Data EFFICIENCY (Total): EFFICIENCY (Downlight): EFFICIENCY (Uplight): CIE CLASSIFICATION: LUMENS/LAMP: NO. OF LAMPS: LUMINOUS OPENING: Width: Length: Height: INPUT WATTS: 100 90 80 70 IESNA: LM-63-2002 ISSUEDATE: 12/29/11 TEST: GH16R1T5ACL.IES TESTLAB: photopia 3.2.6 see: www.ltioptics.com/ies MANUFAC: GAMMALUX LIGHTING SYSTEMS LUMCAT: GH16R-128T5-ACL LAMPS: 1 FLUOR 28W 4’ SILHOUETTE T5 Summary Data EFFICIENCY (Total): EFFICIENCY (Downlight): EFFICIENCY (Uplight): CIE CLASSIFICATION: LUMENS/LAMP: NO. OF LAMPS: LUMINOUS OPENING: Width: Length: Height: INPUT WATTS: 50 500 40 750 30 1000 10 Fixture with APL shielding* 1 CANDELA 20 APL 2 CANDELA 130 120 Candela Plot 130 110 100 90 80 100 90 80 70 70 60 60 250 50 500 40 750 30 50 1000 100 90 80 70 30 1000 10 120 Candela Plot 20 130 110 100 90 80 100 90 60 250 120 110 80 70 60 250 50 50 500 40 500 40 750 30 750 30 1000 1000 10 20 ACL 70 50 750 30 GB16DLENS CANDEL 110 40 750 3 CANDELA 130 120 500 40 20 ASL APL Fixture with ACL shielding*2 CANDELA 1 CANDELA 60 500 1000 10 130 120 GB16DL 110 250 74.0% 62.3% 11.8% SEMI-DIRECT 2900 1 RECTANGULAR 0.13 (Feet) 3.83 0.31 31 60 250 250 71.5% 59.6% 11.9% SEMI-DIRECT 2900 1 RECTANGULAR 0.13 (Feet) 3.83 0.31 31 120 110 ASL IESNA: LM-63-2002 ISSUEDATE: 12/29/11 TEST: GH16R1T5APL.IES TESTLAB: photopia 3.2.6 see: www.ltioptics.com/ies MANUFAC: GAMMALUX LIGHTING SYSTEMS LUMCAT: GH16R-128T5-APL LAMPS: 1 FLUOR 28W 4’ SILHOUETTE T5 130 10 20 10 20 *FIXTURE USES ONE T5 STANDARD OUTPUT LAMP. FOR HIGH OUTPUT, INCREASE CALCULATIONS TO 5,000 BARELAMP LUMENS GB16DLENS CANDELA 248 East Arrow Highway, San Dimas, CA 91773 Tel 909.599.9669 800.356.3275 Fax 909.599.5288 E-mail: info@gammalux.com Gammalux products comply with ARRA Buy American requirements. 3 GAMMALUX G-Beam Series GHD16R General Illumination - Integrated with Baffle Ceiling System Direct Distribution Lighting Systems Mounting Details Perfection by Extrusion Fully dimensioned factory drawings will be provided upon receipt of purchase order. Factory Drawings: ATTACHMENT TO STRUCTURE DESIGNED AND PROVIDED BY OTHERS, NOT BY HUNTER DOUGLAS. INSTALLER TO ENSURE ATTACHMENT TO STRUCTURE HANGING METHOD DOES NOT INTERFERE DESIGNED WITH THEAND PROVIDED BY NOT BY HUNTER DOUGLAS. INSTALLER TO ENSURE MOVEMENT OFOTHERS, HANGER BRACKET INSIDE OF CHANNEL HANGING METHOD DOES NOT INTERFERE WITH THE MOVEMENT OF HANGER BRACKET INSIDE OF CHANNEL 158" (41mm) X 185" (41mm) PRIMARY CHANNEL MAX VARIES 2 5" 18 2" (51mm)(41mm) 517 32" (140mm) 27" (21mm) 32 517 32" (140mm) 10" (254mm) 6" (152mm) MIN, LIGHT PROFILE 11" (38mm) 6" (152mm) MIN,MAX VARIES 1 1 " (38mm) 2 27" (21mm) 32 LIGHT PROFILE HANGER BRACKET 10" (254mm) HANGER BRACKET 5" 18 2" (51mm)(41mm) 158" (41mm) X 185" (41mm) PRIMARY CHANNEL GHD16R fixtures are intended to be installed with the same methodology as the Hunter Douglas Baffle Ceiling System in which they are integrated. If required CLICK FOR by local building code or structural deep box 6 engineer, part # GHDB-SSK, containing two COMPATIBLE PRODUCT supplemental support brackets, may be ordered from Hunter Douglas. HUNTER DOUGLAS CLICK FOR HIGH PROFILE SERIES baffle Ceiling system COMPATIBLE PRODUCT CLICK FOR GAMMALUX STANDARD PRODUCT VERSION :NOYVXUJ[IZOYSGXQKZKJK^IR[YO\KR_ ZNXU[MN.[TZKX*U[MRGY)ROIQNKXK UXIGRRLUXIUTZGIZ GTJIKOROTMY_YZKSOTLUXSGZOUT 248 East Arrow Highway, San Dimas, CA 91773 Tel 909.599.9669 800.356.3275 Fax 909.599.5288 E-mail: info@gammalux.com Gammalux products comply with ARRA Buy American requirements. 4 Gammalux Lighting Systems reserves the right to change details of fixture design and 1T5