TVS Diodes Axial Leaded – 2200W > SLD series SLD Series RoHS Pb e3 Description Uni-directional The AEC-Q101 qualified SLD Series is packaged in a highly reliable industry standard P600 axial leaded package and is designed to provide precision overvoltage protection for sensitive electronics. Features Bi-directional Agency Approvals AGENCY AGENCY FILE NUMBER E230531 Maximum Ratings and Thermal Characteristics (TA=25OC unless otherwise noted) Parameter Symbol Value Unit Peak Pulse Power Dissipation 10ms x 150ms Test Waveform PPPM 2200 W Peak Pulse Power Dissipation 10μs x 1000μs Test Waveform PPPM 5000 W Steady STLte Power Dissipation on Infinite Heat Sink at TL=75ºC (Fig. 6) PD 8.0 W Peak Forward Surge Current, 8.3ms Single Half Sine Wave (Note 3) IFSM 600 A Maximum InsTLnTLneous Forward VolTLge at 100A for Unidirectional Only VF 3.5 V TJ , TSTG -55 to 175 °C Typical Thermal ResisTLnce Junction to Lead RuJL 8.0 °C/W Typical Thermal ResisTLnce Junction to Ambient RuJA 40 °C/W Operating Junction and Storage Temperature Range Functional Diagram • Hi reliability application and automotive grade AEC-Q101 qualified with TJ 175°C • VBR @ TJ= VBR@25°C x (1+αT x (TJ - 25)) (αT:Temperature Coefficient, typical value is 0.1%) • Glass passivated chip junction in P600 package • Meet ISO7637 and ISO16750 load dump test; 2200W peak pulse capability at 10μs × 150ms waveform, repetition rate (duty cycles): 0.01% • Fast response time: typically less than 1.0ps from 0 Volts to BV min • Excellent clamping capability • Typical failure mode is short from over-specified voltage or current • Whisker test is conducted based on JEDEC JESD201A per its table 4a and 4c • IEC-61000-4-2 ESD 30kV(Air), 30kV (Contact) • ESD protection of data lines in accordance with IEC 61000-4-2 • EFT protection of data lines in accordance with IEC 61000-4-4 • Low incremental surge resistance • High temperature soldering guaranteed: 260°C+5/-0°C / 10s ±1sec / 0.375”,(9.5mm) lead length, 5 lbs., (2.3kg) tension • Plastic package is flammability rated V-0 per Underwriters Laboratories • Matte tin lead–free plated • Halogen free and RoHS compliant • Pb-free E3 means 2nd level interconnect is Pbfree and the terminal finish material is tin(Sn) (IPC/ JEDEC J-STD-609A.01) Applications Designed to protect sensitive electronics from: - Inductive Load Switching - Alternator Load Dump Bi-directional Cathode Anode Uni-directional © 2016 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 09/10/16 TVS Diodes Axial Leaded – 2200W > SLD series Electrical Characteristics (T =25°C unless otherwise noted) A Part Number (Uni) Part Number (Bi) SLD10U-017 SLD11U-017 SLD12U-017 SLD13U-017 SLD14U-017 SLD15U-017 SLD16U-017 SLD17U-017 SLD18U-017 SLD20U-017 SLD22U-017 SLD24U-017 SLD26U-017 SLD28U-017 SLD30U-017 SLD33U-017 SLD36U-017 SLD40U-017 SLD43U-017 SLD45U-017 SLD48U-017 SLD51U-017 SLD54U-017 SLD58U-017 SLD60U-017 SLD10-018 SLD11-018 SLD12-018 SLD13-018 SLD14-018 SLD15-018 SLD16-018 SLD17-018 SLD18-018 SLD20-018 SLD22-018 SLD24-018 SLD26-018 SLD28-018 SLD30-018 SLD33-018 SLD36-018 SLD40-018 SLD43-018 SLD45-018 SLD48-018 SLD51-018 SLD54-018 SLD58-018 SLD60-018 Breakdown Voltage VBR @ IT (V) MIN MAX 11.8 12.2 13.3 14.4 15.6 16.7 18.0 18.9 20.0 22.2 24.4 26.7 28.9 31.1 33.3 36.7 40.0 44.4 49.0 50.0 53.3 56.7 60.0 64.4 68.4 13.0 13.5 14.7 15.9 17.2 18.5 19.3 20.9 22.1 24.5 26.9 29.5 31.9 34.4 36.8 40.6 44.2 49.1 54.2 55.3 58.9 62.7 66.3 71.2 75.6 Test Reverse Current Stand off IT Voltage VR (Volts) (mA) 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 10 11 12 13 14 15 16 17 18 20 22 24 26 28 30 33 36 40 43 45 48 51 54 58 60 Maximum Reverse Leakage @ VR IR (µA) Maximum Peak Pulse Current Ipp (A) Maximum Clamping Voltage @ IPP VC (V) Agency Approval 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 300.0 280.2 256.3 237.2 219.8 209.0 196.2 184.8 174.7 157.4 143.7 131.1 121.1 112.3 105.4 95.7 87.8 79.1 73.5 70.2 65.9 61.9 58.6 54.5 52.7 17.0 18.2 19.9 21.5 23.2 24.4 26.0 27.6 29.2 32.4 35.5 38.9 42.1 45.4 48.4 53.3 58.1 64.5 69.4 72.7 77.4 82.4 87.1 93.6 96.8 x x x x x x x x x x x x x x x x x x x x x x x x x Notes: 1. VBR measured after IT applied for 300µs, IT= square wave pulse or equivalent. 2. Surge current waveform per 10μs x 1000μs exponential wave and derated per Fig. 4. 3. All terms and symbols are consistent with ANSI/IEEE C62.35 I-V Curve Characteristics Uni-directional Bi-directional Ipp Vc VBR VR IR VF IT V Vc VBR VR IT IR Ipp PPPM VR VBR VC IR VF Peak Pulse Power Dissipation -- Max power dissipation Stand-off Voltage -- Maximum voltage that can be applied to the TVS without operation Breakdown Voltage -- Maximum voltage that flows though the TVS at a specified test current (IT) Clamping Voltage -- Peak voltage measured across the TVS at a specified Ippm (peak impulse current) Reverse Leakage Current -- Current measured at VR Forward Voltage Drop for Uni-directional © 2016 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 09/10/16 IR IT Ipp VR VBR Vc V TVS Diodes Axial Leaded – 2200W > SLD series Ratings and Characteristic Curves (T =25°C unless otherwise noted) A Figure 1 - TVS Transients Clamping Waveform Figure 2 - Peak Pulse Power Rating Curve 100 Voltage Transients PPPM-Peak Pulse Power (kW) TJ initial = Tamb Voltage or Current Voltage Across TVS Current Through TVS 10 1 0.00001 0.0001 Time 80 60 40 20 10/1000µsec. Waveform 0 25 50 75 100 125 150 175 tr=10µsec 1 Half Value IPPM IPPM ( ) 2 50 10/1000µsec. Waveform as defined by R.E.A td 0 200 TJ=25°C Pulse Width(td) is defined as the point where the peak current decays to 50% of IPPM Peak Value IPPM 100 0 TJ - Initial Junction Temperature (ºC) 1.0 2.0 3.0 4.0 t-Time (ms) Figure 6 - Maximum Non-Repetitive Peak Forward Surge Current Figure 5 - Typical Junction Capacitance 100000 450 IFSM, Peak Forward Surge Current (A) Bi-directional V=0V Uni-directional V=0V 10000 Cj (pF) 0.1 150 IPPM- Peak Pulse Current, % IRSM Peak Pulse Power (PPP) or Current (IPP) Derating in Percentage % 100 Uni-directional @ VR 1000 100 Bi-directional @ VR 10 1 0.01 Figure 4 - Pulse Waveform Figure 3 - Peak Pulse Power Derating Curve 0 0.001 td-Pulse Width (sec.) Tj=25C f=1.0MHz Vsig=50mVp-p 1 10 100 VBR - Reverse Breakdown Voltage (V) 1000 400 350 300 250 200 150 100 50 0 1 10 Number of Cycles at 60 Hz 100 continues © on2016 next page. Inc. Littelfuse, Specifications are subject to change without notice. Revised: 09/10/16 TVS Diodes Axial Leaded – 2200W > SLD series Figure 7 - SOA Chart ISO7637 5A 12V Test System 0.5 Td:400ms 3 1.5 Ri(ohm) Ri(ohm) SLD28U-017 load dump 2 1.0 2.0 2.5 Td:350ms 4 5 6 3.0 7 3.5 4.0 ISO7637 5A 24V Test System 1 SLD15U-017 & SLD15-018 load dump 8 65 123 70 75 Vs(volt) 80 133 85 153 143 Vs(volt) Soldering Parameters Flow/Wave Soldering (Solder Dipping) Peak Temperature : 260°C+5/-0°C Dipping Time : 10s ±1 seconds Soldering : 1 time Physical Specifications Environmental Specifications Weight 0.07oz., 2.1g High Temp. Storage JESD22-A103 Case P600 molded plastic body over passivated junction. HTRB JESD22-A108 Polarity Color band denotes the cathode except Bipolar. Temperature Cycling JESD22-A104 Terminal Matte Tin axial leads, solderable per JESD22-B102. H3TRB JESD22-A101 RSH JESD22-B106 © 2016 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 09/10/16 163 173 TVS Diodes Axial Leaded – 2200W > SLD series Part Numbering System Part Marking System OPTION CODE: BLANK Reel Tape -B Bulk Packaging Cathode Band (for Uni-directional products only) TYPE CODE: U-017 Uni-Directional -018 Bi-Directional F SLD XX U-017 X YYWW Trace Code Marking Littelfuse Logo SLDXXX VBR VOLTAGE CODE (Refer to the Electrical Characteristics table) YY:Year Code WW: Week Code Product Type SERIES CODE Packing Options Component Package Quantity Packaging Option SLDxxXXX P600 800 Tape & Reel EIA STD RS-296 SLDxxXX-B P600 100 BOX Littelfuse Spec. Part Number Packaging Specification Dimensions D Cathode Band (for Uni-directional products only) C A B A P600 Dimensions Inches Millimeters Min Max Min Max A 1.000 - 25.40 - B 0.340 0.360 8.60 9.10 C 0.048 0.052 1.22 1.32 D 0.340 0.360 8.60 9.10 Tape and Reel Specification Off Center either side 2.063+0.079/-0.039 (53.0+2.0/-1.0) 0.028(0.7) 2.56 (65.0) 0.047 (1.2) 0.394+/-0.020 (10.0+/-0.5) 13.0 (330.2) 0.236 (6.0) Dimensions are in inches/mm 3.0 (76.2) 0.68 (17.27) 2.75 (69.85) Recess Depth Max. 0.75 (19.05) Direction of Feed © 2016 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 09/10/16