Transient Voltage Suppression Diodes
Axial Leaded – 600W > P6KE series
P6KE Series
RoHS
Pb
Description
The P6KE Series is designed specifically to protect
sensitive electronic equipment from voltage transients
induced by lightning and other transient voltage events.
• Low incremental surge
resistance
• Typical IR less than 1μA
above 13V
ΔVBR = 0.1% x VBR@25°C x ΔT • High temperature
soldering guaranteed:
• Glass passivated chip
260°C/40 seconds /
junction in DO-15 Package
0.375”,(9.5mm) lead
• 600W peak pulse
length, 5 lbs., (2.3kg)
capability at 10×1000μs
tension
waveform, repetition rate
•
Plastic package has
(duty cycles):0.01%
Underwriters Laboratory
• Fast response time:
Flammability classification
typically less than 1.0ps
94V-O
from 0 Volts to BV min
• Matte Tin Lead–free plated
• Excellent clamping
capability
• Halogen-Free
• RoHS compliant
• Typical maximum
temperature coefficient
Agency Approvals
AGENCY
AGENCY FILE NUMBER
E128662/E230531
Maximum Ratings and Thermal Characteristics
(TA=25OC unless otherwise noted)
Parameter
Symbol
Value
Unit
PPPM
600
W
PD
5.0
W
IFSM
100
A
VF
3.5/5.0
V
TJ , TSTG
-55 to 175
°C
Typical Thermal Resistance Junction
to Lead
RuJL
20
°C/W
Typical Thermal Resistance Junction
to Ambient
RuJA
75
°C/W
Peak Pulse Power Dissipation by
10x1000μs test waveform (Fig.1)
(Note 1)
Steady State Power Dissipation on
inifinite heat sink at TL=75ºC (Fig. 5)
Peak Forward Surge Current, 8.3ms
Single Half Sine Wave Unidirectional
only (Note 2)
Maximum Instantaneous Forward
Voltage at 50A for Unidirectional
only (Note 3)
Operating Junction and Storage
Temperature Range
Applications
TVS devices are ideal for the protection of I/O interfaces,
VCC bus and other vulnerable circuits used in telecom,
computer, industrial and consumer electronic applications.
Notes:
1. Non-repetitive current pulse , per Fig. 3 and derated above TA = 25OC per Fig. 2.
2. Measured on 8.3ms single half sine wave or equivalent square wave, duty cycle=4 per
minute maximum.
_ 200V and VF< 5.0V for devices of VBR >
_ 201V.
3. VF<3.5V for devices of VBR <
P6KE Series
1
Revision: November 16, 2011, 15:06
©2011 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to http://www.Littelfuse.com/series/P6KE.html for current information.
P6KESeries
Series
P6KE
Features
Transient Voltage Suppression Diodes
Axial Leaded – 600W > P6KE series
Electrical Characteristics
Part
Number
(Uni)
Part
Number
(Bi)
Reverse
Stand off
Voltage VR
(Volts)
P6KE6.8A
P6KE7.5A
P6KE8.2A
P6KE9.1A
P6KE10A
P6KE11A
P6KE12A
P6KE13A
P6KE15A
P6KE16A
P6KE18A
P6KE20A
P6KE22A
P6KE24A
P6KE27A
P6KE30A
P6KE33A
P6KE36A
P6KE39A
P6KE43A
P6KE47A
P6KE51A
P6KE56A
P6KE62A
P6KE68A
P6KE75A
P6KE82A
P6KE91A
P6KE100A
P6KE110A
P6KE120A
P6KE130A
P6KE150A
P6KE160A
P6KE170A
P6KE180A
P6KE200A
P6KE220A
P6KE250A
P6KE300A
P6KE350A
P6KE400A
P6KE440A
P6KE480A
P6KE510A
P6KE530A
P6KE540A
P6KE550A
P6KE600A
P6KE6.8CA
P6KE7.5CA
P6KE8.2CA
P6KE9.1CA
P6KE10CA
P6KE11CA
P6KE12CA
P6KE13CA
P6KE15CA
P6KE16CA
P6KE18CA
P6KE20CA
P6KE22CA
P6KE24CA
P6KE27CA
P6KE30CA
P6KE33CA
P6KE36CA
P6KE39CA
P6KE43CA
P6KE47CA
P6KE51CA
P6KE56CA
P6KE62CA
P6KE68CA
P6KE75CA
P6KE82CA
P6KE91CA
P6KE100CA
P6KE110CA
P6KE120CA
P6KE130CA
P6KE150CA
P6KE160CA
P6KE170CA
P6KE180CA
P6KE200CA
P6KE220CA
P6KE250CA
P6KE300CA
P6KE350CA
P6KE400CA
P6KE440CA
P6KE480CA
P6KE510CA
P6KE530CA
P6KE540CA
P6KE550CA
P6KE600CA
5.80
6.40
7.02
7.78
8.55
9.40
10.20
11.10
12.80
13.60
15.30
17.10
18.80
20.50
23.10
25.60
28.20
30.80
33.30
36.80
40.20
43.60
47.80
53.00
58.10
64.10
70.10
77.80
85.50
94.00
102.00
111.00
128.00
136.00
145.00
154.00
171.00
185.00
214.00
256.00
300.00
342.00
376.00
408.00
434.00
477.00
486.00
495.00
512.00
Breakdown
Voltage VBR
(Volts) @ IT
MIN
MAX
Test
Current
IT
(mA)
6.45
7.13
7.79
8.65
9.50
10.50
11.40
12.40
14.30
15.20
17.10
19.00
20.90
22.80
25.70
28.50
31.40
34.20
37.10
40.90
44.70
48.50
53.20
58.90
64.60
71.30
77.90
86.50
95.00
105.00
114.00
124.00
143.00
152.00
162.00
171.00
190.00
209.00
237.00
285.00
332.00
380.00
418.00
456.00
485.00
503.50
513.00
522.50
570.00
7.14
7.88
8.61
9.55
10.50
11.60
12.60
13.70
15.80
16.80
18.90
21.00
23.10
25.20
28.40
31.50
34.70
37.80
41.00
45.20
49.40
53.60
58.80
65.10
71.40
78.80
86.10
95.50
105.00
116.00
126.00
137.00
158.00
168.00
179.00
189.00
210.00
231.00
263.00
315.00
368.00
420.00
462.00
504.00
535.00
556.50
567.00
577.50
630.00
10
10
10
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Maximum
Clamping
Voltage
VC @ Ipp
(V)
Maximum
Peak
Pulse
Current Ipp
(A)
Maximum
Reverse
Leakage
IR@ VR
(µA)
10.5
11.3
12.1
13.4
14.5
15.6
16.7
18.2
21.2
22.5
25.2
27.7
30.6
33.2
37.5
41.4
45.7
49.9
53.9
59.3
64.8
70.1
77.0
85.0
92.0
103.0
113.0
125.0
137.0
152.0
165.0
179.0
207.0
219.0
234.0
246.0
274.0
328.0
344.0
414.0
482.0
548.0
602.0
658.0
698.0
725.0
740.0
760.0
828.0
58.1
54.0
50.4
45.5
42.1
39.1
36.5
33.5
28.8
27.1
24.2
22.0
19.9
18.4
16.3
14.7
13.3
12.2
11.3
10.3
9.4
8.7
7.9
7.2
6.6
5.9
5.4
4.9
4.5
4.0
3.7
3.4
2.9
2.8
2.6
2.5
2.2
1.9
1.8
1.5
1.3
1.1
1.0
0.9
0.9
0.8
0.8
0.8
0.75
1000
500
200
50
10
5
5
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Agency
Approval
For bidirectional type having VR of 10 volts and less, the IR limit is double.
For parts without A , the VBR is ± 10% and VC is 5% higher than with A parts
P6KE Series
2
Revision: November 16, 2011, 15:06
©2011 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to http://www.Littelfuse.com/series/P6KE.html for current information.
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
Transient Voltage Suppression Diodes
Axial Leaded – 600W > P6KE series
Ratings and Characteristic Curves (T =25°C unless otherwise noted)
A
PPPM- Peak Pulse Power (kW)
100
Figure 2 - Pulse Derating Curve
Non-repetitive Pulse
Waveform shown in Fig 3.
TA=25ºC
10
1
0.1
0.1µs
1.0µs
10µs
100µs
1.0ms
100
Peak Pulse Power (PPP) or Current (IPPM)
Derating in Percentage, %
Figure 1 - Peak Pulse Power Rating
75
50
25
0
0
10ms
td- Pulse Width (sec.)
175 200
Peak Value
IPPM
100
Bi-directional V=0V
Uni-directional @VR
Half Value
IPPM IPPM
( )
2
50
100
10/1000µsec. Waveform
as defined by R.E.A
1.0
2.0
3.0
Bi-directional @VR
10
td
0
Uni-directional V=0V
1000
Cj (pF)
IPPM- Peak Pulse Current, % IRSM
TJ=25°C
Pulse Width(td) is defined
as the point where the peak
current decays to 50% of IPPM
Tj=25C
f=1.0MHz
Vsig=50mVp-p
1
1.0
4.0
10.0
100.0
1000.0
VBR - Reverse Breakdown Voltage (V)
Figure 6 - Maximum Non-Repetitive Forward Surge
Current
Figure 5 - Steady State Power Derating Curve
6
120
IFSM - Peak Forward Surge Current
(A)
Steady State Power Dissipation (W)
100 125 150
10000
tr=10µsec
t-Time (ms)
5
100
4
3
2
L = 0.375” (9.5mm)
Lead Lengths
1
0
25
50
75
100
125
150
175
200
TL-Lead Temperature(ºC)
P6KE Series
75
Figure 4 - Typical Junction Capacitance Uni-Directional
150
0
50
TA- Ambient Temperature (oC)
Figure 3 - Pulse Waveform
0
25
80
60
40
20
0
1
10
100
Number of Cycles at 60 Hz
3
Revision: November 16, 2011, 15:06
©2011 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to http://www.Littelfuse.com/series/P6KE.html for current information.
Transient Voltage Suppression Diodes
Axial Leaded – 600W > P6KE series
Soldering Parameters
Lead–free assembly
Pre Heat
- Temperature Min (Ts(min))
150°C
- Temperature Max (Ts(max))
200°C
- Time (min to max) (ts)
60 – 180 secs
Ramp-up
TL
Average ramp up rate (Liquidus Temp
(TL) to peak
3°C/second max
TS(max) to TL - Ramp-up Rate
3°C/second max
Reflow
tp
TP
Temperature (T)
Reflow Condition
tL
Ts(max)
Ramp-down
Ts(min)
ts
Preheat
25˚C
- Temperature (TL) (Liquidus)
217°C
- Time (min to max) (ts)
60 – 150 seconds
t 25˚C to Peak
Time (t)
Peak Temperature (TP)
260+0/-5 °C
Time within 5°C of actual peak
Temperature (tp)
20 – 40 seconds
Flow/Wave Soldering (Solder Dipping)
Ramp-down Rate
6°C/second max
Peak Temperature :
265OC
Time 25°C to peak Temperature (TP)
8 minutes Max.
Dipping Time :
10 seconds
Do not exceed
280°C
Soldering :
1 time
Physical Specifications
Critical Zone
TL to TP
Environmental Specifications
Weight
0.015oz., 0.4g
Temperature Cycle
JESD22-A104
Case
JEDEC DO-204AC (DO-15) molded
plastic body over passivated junction.
Pressure Cooker
JESD 22-A102
Polarity
Color band denotes the cathode except
Bipolar.
High Temp. Storage
JESD22-A103
Terminal
Matte Tin axial leads, solderable per
JESD22-B102D.
HTRB
JESD22-A108
Thermal Shock
JESD22-A106
Dimensions
Dimensions
D
C
A
B
A
A
Inches
Millimeters
Min
Max
Min
Max
1.000
-
25.40
-
B
0.230
0.300
5.80
7.60
C
0.028
0.034
0.71
0.86
D
0.104
0.140
2.60
3.60
DO-204AC (DO-15)
P6KE Series
4
Revision: November 16, 2011, 15:06
©2011 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to http://www.Littelfuse.com/series/P6KE.html for current information.
Transient Voltage Suppression Diodes
Axial Leaded – 600W > P6KE series
Part Numbering System
Part Marking System
P6KE xxx XXX
Cathode Band
Littelfuse Logo
TYPE CODE:
A Uni-Directional (5% Voltage Tolerance)
CA Bi-Directional
VOLTAGE CODE
(Refer to the Electrical Characteristics table)
F
YYWW
P6KEXXX
OPTION CODE:
BLANK Reel Tape
-B Bulk Packaging
Trace Code Marking
Product Type
SERIES CODE
Packaging
Component
Package
Quantity
Packaging
Option
P6KExxxXX
DO-204AC
4000
Tape & Reel
P6KExxxXX-B
DO-204AC
1000
BULK
Part Number
Packaging Specification
EIA STD RS-296E
Littelfuse Concord Packing Spec. DM-0016
Tape and Reel Specification
Off Center
either side
0.039(1.0)
2.56
(65.00)
2.062
(52.37)
0.40
(10.16)
0.048
(1.22)
Dimensions are in
inches/mm
0.25
(6.35)
13.0
(330.2)
3.0
(76.2)
0.68
(17.27)
2.75
(69.85)
Recess Depth Max. 0.75 (19.05)
P6KE Series
Direction of Feed
5
Revision: November 16, 2011, 15:06
©2011 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to http://www.Littelfuse.com/series/P6KE.html for current information.