Analog Devices Line Transformers and
POTS Inductors for the (DMT) Chipset
• Suitable for 8mbps/768 kbps
• ADSL/RADSL applications
• Central Office or Remote applications
• Designed to meet IEC-950 1500 Vrms isolation
and insulation requirements
• Surface Mount models available
• Meets ANSI T1.413/1995, and ANSI T1.601 for
Bellcore Loops
• ISO 9001 Certified Supplier
• Agency approvals are pending UL94V-0 materials
• Designed to optimize performance with the ADI
AD20msp910/918 chipset/AD816 Line Driver
Specifications
Turns Ratio
Leakage uH
IWC Pf Max
Chip:Line
Max
+/- 2%
Schott P/N
OCL +/- 5%
34714
5.00
1:1
15
32502
5.00
1:1
15
DCR Chip
Max Ohms
DCR Line
Max Ohms
Dielectric
Strength
Vrms Min
Config /
Schematic
App
45
2.80
2.80
1500
EP13 THD
CO/CP
45
2.80
2.80
1500
EP13 SMD
CO/CP
Parts availability subject to Schott manufacturing schedules and leadtimes. Not all parts available from stock.
Please contact us for more details and availability. The Adobe Acrobat Reader is required to view these linked documents.
Electrical Specifications Test Criteria
1. These transformers are designed for operating within a temperature range of -40° to +85°.
2. Inductance is measured at 10 kHz, 0.1Vrms, leakage inductance at 100kHz, 0.1 Vrms
3. Longitudinal balance @ 100kHz, (1-4), 100 ohm input = 50dB min.
4. Harmonic Distortion @ 100kHz, 4.0V, (1-4), 100 ohm input = -80dB max.
5. Return loss @ 30 kHz-1.1MHz is 15dB min.
6. Insertion loss @ 100 kHz is < 0.5db.
7. Frequency response +/- 0.5dB max from 30kHz to 1.1 MHz.
8. Surge Voltage capability: Metalic 800V peak 10/560 usec. longitudinal: 2400V peak 10/700 usec.
All data is believed to be accurate at time of printing. Schott Corporation reserves the right to make changes without notification.
“Schott” is a trade name of Schott Corporation. All other trademarks and trade names are the property of their respective holder.
© 2001 Schott Corporation
1000 Parkers Lake Road, Wayzata, Minnesota 55391 U.S.A. Tel: + (952) 475-1173
Fax: + (952) 475-1786
Email: salesd@schottcorp.com
Web: http://www.schottcorp.com
EP 13 THD
EP 13 SMD
.560 MAX
(14.22)
5
.063
(1.60)
6
5
YYWW
1
.560 MAX
(14.22)
10
6
SCHOTT
SCHOTT
YYWW-X
.560 MAX
(14.22)
REF PWB LAYOUT
.670 –.010
(17.02)
1
.035
(0.89)
.098
(2.5)
10
.710
18.03)
.500 MAX
(12.70)
.110 MIN
(2.79)
.400 –.010
(10.16–0.25)
.500 MAX
(12.70)
.100 –.010
(2.54–0.25)
.008
(0.2)
.606 – .006
(15.39)
.020 Sq.
(0.51)
.098 –.010
(2.5)
.028
(0.7)
Coplanarity < .004 (0.10)
SCHEMATIC
CHIP
10
1
8
9
3
2
7
4
LINE
All statements and technical information contained herein are believed to be accurate, but the accuracy and completeness thereof is not guaranteed.
If any product is found to be defective, Schott Corporation’s (Seller) only obligation shall be to replace such quantity of the product proved to be
defective. User shall determine the suitability of the product for the intended use, and user assumes all risk and liability whatsoever in connection
herewith. Seller shall not be liable for any direct, consequential, or incidental loss or damage. Conditions not specifically stated herein shall be
governed by established trade customs. Schott Corporation reserves the right to makes changes without notification. “Schott” is a trade name of
Schott Corporation. All other trademarks and trade names are the property of their respective holder.
©2001 Schott Corporation
Schott Corporation
1000 Parkers Lake Road
Wayzata, Minnesota 55391
U.S.A.
Tel: + (952) 475-1173
Fax: + (952) 475-1786
Email: salesd@schottcorp.com
Web: http://www.schottcorp.com