CATALOG #
TYPE
JOB NAME
WATTAGE
VOLTAGE
Lighting Since 1895
SmartLED™ MRI Lighting Systems
MRP-22290
2’ x 2’ Scenic Panel Luminaire
Ultra-slim 20W LED Illuminated Artwork
Use Multiple Luminaires to Create a Soothing
and Attractive “SkyLight” Effect
Specifications
Luminaire Features
• Driverless, 20 watt, low voltage, Class II, DC
powered.
• Must use in conjunction with SmartSupply™
LPS-0700A.
• Ultra-thin (2”) extruded aluminum housing.
White finish; for custom color see Option -94.
• Completely non-ferro magnetic.
Thermal Management
• Housing / heat sink provides maximum heat
dissipation for side-fire LED technology.
SmartSupply™ (Remote Power Supply)
Required - Order Separately
• LPS-0700A: Digitally controlled. Drives up to
12 scenic panels. Maximum 100 ft. distance.
• 100-0.2% full range dimming in up to 4 zones.
• Compatible with 0-10V DC dimming controls.
See vendor qualified list in the owner’s manual.
• Suitable for dry, non-plenum locations only
with ambient temperature range of -20°C
(-4°F) to 40°C (104°F). 115 - 277V isolated
circuit only; maximum 290V; 50-60 Hz.
• For more information, see specification sheet
for LPS-0700A.
SmartFilter™ (RFI / EMI Filter)
Required - Order Separately
• RFI-3100D: Protects up to 3 luminaires
(SmartSupply channels).
• Provides 100 db of RF signal attenuation,
matching the most stringent MRI
requirements.
• For more information see specification sheet
for RFI-3100D.
SmartPower™ Battery Backup
• EMI-21220 for emergency power.
• See specification sheet; order separately.
Trim / Lens
• Regressed trim provides a unique,
architectural “skylight” effect when installed
in grid ceiling.
• Extruded acrylic, wave guide lens provides
unparalleled uniformity and even illumination
of the image.
See specification sheet; order separately.
Installation
• Requires minimum 18 AWG twisted pair
shielded wire from SmartSupply™ to
fixtures.
• Drops into 2’ x 2’ ceiling grid.
Use With:
•SmartSupply™ LPS-0700A
•SmartFilter™ RFI-3100D
Use of SmartSupply™
and SmartFilter™
REQUIRED or Kirlin
warranty is null and void
UL, C-UL (Canada) Listings
• Wet, damp, dry locations, covered ceilings.
• Type IC for direct contact with insulation.
CE & FCC Compliance
• Meets IEC/EN 60601-1-2 electromagnetic
compatibility standard for medical electrical
equipment.
• FCC Part 15 certified for EMI/RFI emissions.
FIVE YEAR
Limited Warranty
• Complete standard fixture.
Dimensions
23¾” Sq.
[603mm]
Luminaire is available in nominal 2’ x 2’ size only.
Specify a scenic array as large as required.
See following pages for complete ordering & configuration information.
SmartLED MRI
MAY 2016
3401 EAST JEFFERSON AVENUE • DETROIT, MICHIGAN 48207-4232
(313) 259-6400 • Fax: (313) 259-9409 OR (313) 259-3121 • www.kirlinlighting.com
SmartLED™ MRI Lighting Systems
Luminaires • SmartSupply • SmartFilter
DUE TO OUR CONTINUING EFFORT TO IMPROVE PRODUCTS, TECHNICAL INFORMATION IS SUBJECT TO CHANGE WITHOUT NOTICE. THE KIRLIN
COMPANY EXPECTS PHOTOMETRIC PERFORMANCE TO IMPROVE SIGNIFICANTLY AND FREQUENTLY AS LED SOURCE TECHNOLOGY IMPROVES.
CATALOG NUMBER
MRP-22290
SmartLED™ MRI Lighting Systems
Since 1895
MRP-22290
2’ x 2’
SCENIC PANEL
20 WATT
Step 1: Select Size and Artwork Orientation
• Specify overall size (panel quantity) and orientation using Size Option
added to base catalog number MRP-22290
• See Product Numbering Guide below
When specifying size,
orientation and artwork,
consider how the
image will be
divided and cropped.
For example:
Overall Size and Orientation
Landscape
Nominal
Dimensions
Fixture
Qty.
Arrangement
Option
Portrait
Preferred
Resolution
(Pixels)
2’ x 2’
1
-2x2
1800 x
1800
2’ x 4’
2
-4x2
3600 x
1800
4’ x 4’
4
-4x4
3600 x
3600
4’ x 6’
6
-6x4
5400 x
3600
6’ x 6’
9
-6x6
5400 x
5400
6’ x 8’
12
-8x6
7200 x
5400
8’ x 8’
16
-8x8
7200 x
7200
Arrangement
Option
Preferred
Resolution
(Pixels)
-2x4
1800 x
3600
-4x4
-4x6
3600 x
5400
-6x4
-6x8
5400 x
7200
-4x6
Custom
Size
To see how your artwork
will appear in an
arrangement,
consult factory.
-9x9
Specify number of panels and orientation of artwork
Product Numbering Guide
M R P - 2 2 2 9 0 - 4 x 6 - A 0 1 - 9 4
Example:
Scenic Panel Base
Product Number
Custom Color Trim Option
Size and
Orientation Option*
Artwork
Option
*-4x6 is not the same as -6x4, see above.
SmartLED™ MRI Lighting Systems
Since 1895
Step 2: Select Artwork
2’ x 2’
SCENIC PANEL
MRP-22290
20 WATT
Add Artwork Option Code to Catalog Number
-A01
-A02
-A03
-A04
-A05
-A06
Artwork Selection Continued Next Page
Step 2: Select Artwork - continued
Add Artwork Option to Catalog Number
QUALIFIED
ARRA
JOB NAME
TYPE
APPROVAL STAMP
SUBMITTAL DATA
1800 x 1800 pixels (or greater)
per 24” x 24” panel
See “Overall Size and Orientation” table
on page 2 for preferred image resolution
for each configuration
-A99
Step 3: Select Additional Options
-94 Custom color trim. Consult factory.
-99 Special modification. Consult factory.
-BG Anti-microbial Kirlin BioGard™ white (only)
frame finish.
3. Use a 0-10V wall box dimmer that is approved for use with SmartSupply™ (consult Owner’s Manual); wall dimmers must be located outside of room shield and
must not be filtered through RFI-3100D SmartFilter™
SmartLED MRI
FEBRUARY
MAY 2016
2015
LIMITED WARRANTY: CATALOGED KIRLIN FIXTURES ARE WARRANTIED FREE OF DEFECTS IN WORKMANSHIP OR MATERIAL FOR THREE YEARS FROM DATE OF PURCHASE, INSTALLED TO N.E.C., IN NORMAL USE. Manufacturer at his option will replace or repair such fixture or refund the purchase price on presentation
of proof of purchase and defective fixture at the offices of manufacturer within three years of original shipment. Liability of manufacturer is limited to the foregoing, and manufacturer shall not be liable for any other damages, direct or indirect, sustained or suffered by purchaser or any person. This warranty is supplied to the buyer in place of all other warranties, expressed or implied. Seller
does not warrant as to merchantability or fitness for a particular use, nor will any oral statement constitute a warranty or amend this specific warranty. Abnormal use, abuse of the fixture, improper installation, or repair, or modification of the fixture without prior written authorization from the manufacturer will render the warranty void.
CATALOG NUMBER
VOLTAGE
WATTAGE
2. Use a minimum #18 AWG twisted, shielded pair wire
“Artifact-Free”
Imaging
1. Use complete Kirlin SmartLED™ MRI system: luminaires, filters, drivers
3 Steps To
Custom Artwork
Preferred Image Resolution
Custom Image
Consult
Factory
20 WATT
SCENIC PANEL
2’ x 2’
MRP-22290
Since 1895
SmartLED™ MRI Lighting Systems