EDGE EV3P
E V O L U T I O N
T5, T5HO, T8 Recessed Linear with
Straight and Staggered Lamp / Parabolic Louver
Project Name
Date
Catalog Number
Type
CONSTRUCTION Extruded aluminum trim with formed cold rolled 20 gauge steel back box housing. Highly reflec-
tive die-formed white painted steel reflector. Die-formed anodized(1)snap-in
aluminum
semi-specular
parabolicLamps
louver
(1) Staggered
or (2) Straight
Lamps
removable for lamp replacement.
ELECTRICAL T5, T5HO: Standard programmed start UL listed Class P, T5 electronic, sound rated A, thermally protected,
5-1/8”
high power factor ballasts less
than 10% THD, universal voltage (120/277) with 50/60Hz operation. T8: Standard
instant start UL listed Class P, T8 electronic, Sound Rated A, thermally protected, high power factor ballasts less than
10% THD, universal voltage (120/277). Through wiring with quick1T5/T5HO,
connects 1T8
standard.
Standard single 1T5/T5HO
circuit. Integral
2T5/T5HO
battery packs with remote test switch are provided with 1B and 2B options. Each ballast provided with disconnects to
meet luminaire disconnect code requirement.
MOUNTING Edge3”is designed to install into acoustical grid and inaccessible ceilings. Specify GXG, FLF, SFS, NFN for
individual, unjoinable
G1/G9/GS:units (individual units will fall on-grid). Specify GX, FL, SF, NF for continuous runs (runs designed
to fall on-grid).3-13/16”
Grid retention brackets are integral to housing. Each housing contains 4 grid retention brackets. Consult
factory for FL
detailed
installation instructions.
& FLF: 4-1/8”
See Straight or Staggered Lamp Guide for row
FINISH Standard powder-coat textured white, metallic silver, textured
black, graphite
or bronze
consult
configuration,
wattage and
numberpainted
of lampsfinish,
per run.
factory for chip of standard paint finishes. Contact factory for additional custom color and finish options.
LABELS UL and cUL Listed, approved for dry/damp location unless otherwise noted.
(1) or (2) Straight Lamps
Staggered
Lamps
YEAR LED
WARRANTY
Staggered
Lamps
(1) Staggered Lamps
5-1/8”
LFL
1T5/T5HO, 1T8
LED
Convertible
2T5/T5HO
1T5/T5HO
Convertible
LED
LFL
3”
G1/G9/GS:
3-13/16”
FL & FLF: 4-1/8”
See Straight or Staggered Lamp Guide for row
configuration, wattage and number of lamps per run.
L U M I N A I R E S P E C I F I C AT I O N
Sample Catalog #: EV3P-1T5-24’-FL-120-1C-W
EV3_P-
_T___-
___’-
___-
___-
HOUSING
LAMPS
LENGTH
MOUNTING
1
VOLTAGE
LFL
Convertible
5-1/8”
LED
EV3P- Edge
Evolution 3,
Parabolic Louver,
Straight Lamp
EV3SP- Edge
Evolution 3,
Parabolic Louver,
Staggered Lamps
1T52T51T5HO2T5HO1T8-
(1) T5
(2) T510
(1) T5HO
(2) T5HO10
(1) T810
__-(1) or (2) Straight__Lamps
YEAR LED
WARRANTY
Individual Units (CANNOT BE JOINED)
Acoustical Grid Ceiling12
G1G- 1” Ceiling Grid
G9G- 9/16” Ceiling Grid 3”
GBG- 9/16” Ceiling Grid
with Bevel Trim
G1/G9/GS:
3-13/16”
Grid
GSG- Screw Slot Ceiling
120- 120 V
FL & FLF: 4-1/8”
Inaccessible Ceiling
277- 277 V
FLF- Standard 1/2” Flange
347- 347 V5
SFS- Spackle Flange
UNV- UNV5
4
NFN- Flangeless
(120-277)
Continuous Runs (JOINABLE)3
Acoustical Grid Ceiling12
G1- 1” Ceiling Grid
G9- 9/16” Ceiling Grid
GB- 9/16” Ceiling Grid with Bevel Trim
GS- Screw Slot Ceiling Grid
Inaccessible Ceiling
FL- Standard 1/2” Flange
SF- Spackle Flange
NF- Flangeless4
CIRCUITING
Continuous Runs3
xx’- Specify row length to 1’ increments
OPTIONS
LED
Convertible
LFL
CPW- Matte White
MRFS- 1T5/T5HO,
Metallic 1T8
Silver2T5/T5HO
LMRFBL- Textured Black
PMGR- Graphite
RCBR- Bronze
LOCC- Custom Color
2
Individual Units2
2- 2’, 23” fixture (Staggered not available)2
3- 3’, 35” fixture (Staggered not available)2
4- 4’, 47” fixture (Staggered not available)2
6- 6’, 71” fixture2
8- 8’, 95” fixture2
FINISH
____
(1) Staggered Lamps
Chicago Plenum
1T5/T5HO
Fixed MR16
Halogen11
Fixed MR16 LED11
Perimeter Mount7
Rotating Crossbar8
Lens Overlay
See Straight or Staggered Lamp Guide for row
configuration, wattage and number of lamps per run.
Single Circuit
Dual Circuit
Single Circuit Dimming6
Dual Circuit Dimming6
Single Circuit with
Battery Pack6,9
2B- Dual Circuit with
Battery Pack6,9
1E- Single Circuit with
Emergency Circuit6
2E- Dual Circuit with
Emergency Circuit6
1C2C1D2D1B-
1
See back page for mounting detail. 2Individual units cannot be joined. All end trims are factory installed and cannot be removed in the field. 3Continuous rows made up of both even and odd length fixtures.
Designed to fall on-grid. 4NF and NFN to be utilized for metal pan / millwork ceiling. 5347 and UNV not available with battery pack. 6Some Edge configurations will not accommodate all electrical options.
Consult factory. 7Available for acoustical grid ceilings. Wall rail painted white unless otherwise specified. 81/2” to 5/8” drywall thickness. Available for standard 1/2” flange (FL). 9Integral battery packs
with remote test switch are provided with 1B and 2B option. 10Staggered lamp available for 1T5 and 1T5HO only. 11Consult MR16 Resource Guide for configurations using MR16 units. 12 See page 3 for grid
retention bracket details.
®
Pinnacle Architectural Lighting 12655 East 42nd Avenue, Suite 50 Denver, CO 80239
Phone 303.322.5570
Fax 303.322.5568 www.pinnacle-ltg.com
© 2016 Pinnacle Architectural Lighting®
February 2016
Specifications and dimensions subject to change without notice. Specification sheets that appear on pinnacle-ltg.com are the most recent version and supersede all other previously printed or electronic versions.
Part #: EV3H-2T5-4’
Total Luminaire Efficiency: 51.9%
Part #: EV3H-1T5-4’
Total
Luminaire
Efficiency: 58.6%
EV3A,
EV3H
Part #: EV3H-1T8-4’
Total Luminaire Efficiency: 54.1%
Side Views
48”, 72”, 96”
P H O T O M 23"
ETRICS
2'
1” Grid, Standard Tile: 1” Grid, Tegular Tile:
Part #: EV3R-2T8-4’
Total Luminaire Efficiency: 00%
EDGE EVOLUTION
23”, 35”, 47”, 71”, 95”
9/16” Grid, Standard Tile: 9/16” Grid, Tegular Tile: 9/16” Grid, Tegular Tile: 9/16” Grid, Tegular Tile:
Screw Slot Grid:
lens per
2'805
unit
(2’ individual
unit in
notpart
available
withG9
staggered
853in part # Use GS or GSG in part # Use GS or1737
Use G1 or(1)G1G
in part
# Use
G1 or G1G
# Use
or G9Glamp)
in1680
part # Use G9 or G9G in part # Use GB or GBG
GSG in part #
71”639
or 72”
35"
1260
604
1303
3'
47” or 48”
4'
6'
840
403
(1) lens per 3' unit (3’ individual unit not available with staggered lamp)
420
201
Flange Detail
Non-Flange
426
869
434
Rotating Crossbar
95” or 96”
8'
(1) lens per 4' unit (4’ individual unit not available with staggered lamp)
(1) lens per 6' unit
213Mount
Perimeter
Spackle Flange
(1) lens per 8' unit
1Acoustical Grid Ceiling and Inaccessible Ceilings available as individual units or continuous rows. Individual units and rows are available for on-grid installation with acoustical ceilings.
Test #: 204785
Part #: EV3P-2T5-4’
Total Luminaire Efficiency: 64.8%
Test #: 204782
Part #: EV3P-1T5-4’
Total Luminaire Efficiency: 70.8%
EV3P
Test #: 204784
Part #: EV3P-1T8-4’
Total Luminaire Efficiency: 66.2%
1
Exposed Flange Detail:
Pan or Millwork: RUN
Drywall,
Flangeless Look:
INDIVIDUAL
AND Metal
CONTINUOUS
MODULES
Unavailable Structure Support:
SideBracket
Views and Wall Rail:
48”,
72”, 96”
23”,#35”, 47”, 71”, 95”
Specify RC in part #
Specify
PM in part
Specify FL or FLF
23" in part # Specify NF or NFN in part # Specify SF or SFS in part #
2'
3'
4'
(1) louver per 2' unit (2’ individual unit not available with staggered lamp)
1049
1242
35"
1175
787
931
6'
525staggered lamp)
(1) louver per621
3' unit (3’ individual unit not available with
31047” or 48”
262
8'
1208
1051
906
604
789
71” or 72”
881
(2)
louvers per 6' unit
587
526
95” or30296”
294
(1) louver per 4' unit (4’ individual unit not available with staggered lamp)
Test #: 000000
Part #: EV3P-2T8-4’
Total Luminaire Efficiency: 00%
263
(2) louvers per 8' unit
1Acoustical Grid Ceiling and Inaccessible Ceilings available as individual units or continuous rows. Individual units and rows are available for on-grid installation with acoustical ceilings.
MOUNTING DETAILS
Test #: 204795
Test #: 204775
Part #:1”EV3C-2T5-4’
Grid Mounting OptionsPart #: EV3CL-2T5-4’
Total Luminaire Efficiency: 57.3% Total Luminaire Efficiency: 49.3%
Test #: 204800
Test #: 204790
Part #: EV3CM-2T5-4’
Part #: EV3CG-2T5-4’
9/16” Grid Mounting Options
Total Luminaire Efficiency: 50.7% Total Luminaire Efficiency: 55.3%
Test #: 204805
Part #: EV3CR-2T5-4’
Screw Slot
Total Luminaire Efficiency: 47%
Mounting
1473
1236
1430
1437
1246
1105
927
1072
934
737
618
715
1078
719
623
1” Grid, Standard Tile: 1” Grid, Tegular Tile: 9/16” Grid, Standard Tile: 9/16” Grid, Tegular Tile: 9/16” Grid, Tegular Tile: 9/16” Grid, Tegular Tile:
Screw Slot Grid:
368
305
355
357
311
Use G1 or G1G in part # Use G1 or G1G in part # Use G9 or G9G in part # Use G9 or G9G in part # Use GB or GBG in part # Use GS or GSG in part # Use GS or GSG in part #
SPECIALTY MOUNTS
INACCESSIBLE CEILING MOUNTING
Flange Detail
Non-Flange
Test #: 204810
Part #: EV3D-2T5-4’
Total Luminaire Efficiency: 66.8%
Spackle Flange
Test #: 204820
Part #: EV3DL-2T5-4’
Total Luminaire Efficiency: 58%
Test #: 204825
Part #: EV3DM-2T5-4’
Total Luminaire Efficiency: 59.8%
Exposed Flange Detail:
Metal Pan or Millwork:
Drywall, Flangeless Look:
Specify FL or FLF in part # Specify NF or NFN in part # Specify SF or SFS in part #
MR16 LAMPS
APPLICATION: MR16’s are ideal for conference rooms,
corridors, wall washing, retail spaces and training facilities where accent lighting is required.
TECHNICAL: MR16 fully enclosed compartment eliminates light from entering into other fixture areas. Available in 20, 35 and 50 watt halogen lamps, 4 and 8 watt
LED lamps. (lamps not included). Consult factory for
other lamp types. MR16 lamp is in a fixed position.
ELECTRICAL: Standard 50 watt max halogen lamp transformer (120v or 277v),
60 watt max LED electronic transformer (120v only). MR16 installed as independent circuit. MR16 voltage to match fluorescent voltage.
®
Perimeter Mount
Rotating Crossbar
Test #: 204814
Part #: EV3DG-2T5-4’
Total Luminaire Efficiency: 64.8%
Bracket and Wall Rail:
Specify PM in part #
Test #: 204830
Part #: EV3DR-2T5-4’
Total Luminaire Efficiency: 56%
Unavailable Structure Support:
Specify RC in part #
LABELS: UL and cUL Listed, approved for dry/damp location unless otherwise noted.
ORDERING INFORMATION: Specify MR16 layout and lens in the
options section of the part number. Sample Catalog #: EV3P-1T5-4G1-120-1C-W-M4M. See MR16 Resource Guide for Layout and Lens
Options.
Pinnacle Architectural Lighting 12655 East 42nd Avenue, Suite 50 Denver, CO 80239
Phone 303.322.5570
Fax 303.322.5568 www.pinnacle-ltg.com
© 2016 Pinnacle Architectural Lighting®
February 2016
Specifications and dimensions subject to change without notice. Specification sheets that appear on pinnacle-ltg.com are the most recent version and supersede all other previously printed or electronic versions.
GRID RETENTION BRACKET
EDGE EVOLUTION
Joint holes
Joint for
holes
#8-32
for #8-32
ScrewsScrews
GRID RETENTION: At every
joint, the addition of grid
retention brackets results in
a sturdy connection between
the fixtures and the grid.
Insert screws through the
bracket into the grid to
secure.
JOINT ALIGNMENT: Incorporating biscuits and screws
not only creates a secure
joint but also aids in fixture
alignment.
BiscuitBiscuit
®
Pinnacle Architectural Lighting 12655 East 42nd Avenue, Suite 50 Denver, CO 80239
Phone 303.322.5570
Fax 303.322.5568 www.pinnacle-ltg.com
© 2016 Pinnacle Architectural Lighting®
February 2016
Specifications and dimensions subject to change without notice. Specification sheets that appear on pinnacle-ltg.com are the most recent version and supersede all other previously printed or electronic versions.