NOVA24
RECESSED
W W W . L U M E N W E R X . C O M
PROJECT:
APPROVED BY:
SIGNATURE:
Grid - shown with a Nova flat lens
Grid - shown with a Nova Slope lens
TYPE
QTY
DESCRIPTION
Nova is an efficient architectural LED troffer with a distinctive luminous shielding that distributes gentle
brightness from the sides of its central optical element. Using advanced LED engines, Nova provides
highly efficient illumination and offers comprehensive ceiling, electrical, and controls options in 2x2, 1x4,
and 2x4 sizes. Nova is available with both Flat and Slope side diffusers.
See separate spec sheets for other available mountings.
IC RATED
ORDER GUIDE
24
PMO
HLO
LUMINAIRE ID
SIZE
CENTER OPTICS
SIDE OPTICS
LIGHT SOURCE
NUMBER OF LAMPS
VOLTAGE
BALLAST
NOVRF - nova
24 - 2'x4'
PMO - Precision
HLO - High-Efficiency
T5 - T5 lamp
1 - 1 lamp
120 - 120V
RS - rapid start
Micro-Prism Optic
Lambertian Optic
T5HO - T5HO lamp
2 - 2 lamps
277 - 277V
D - dimming 0-10V
T8 - T8 lamp
3 - 3 lamps
UNV - 120V-277V
ST - step dimming
347 - 347V
DA - dali
recessed flat
NOVRS - nova
recessed slope
LHL - Lutron Hi-Lume 3D
LEH - Lutron EcoSystem H
ELECTRICAL
MOUNTING
FINISH
CONTROLS
OPTIONS
1 - 1 circuit
TG9 - tegular 9/16"
W - matte white
ONBOARD
FU - fuse
2 - 2 circuits
TG15 - tegular 15/16"
CF# - custom finish specify RAL#
OMS - Motion Sensor & power pack
FWC - flexible whip cable (6' std)
+EB - emergency battery pack
TB9 - t-bar 9/16"
ODS - Daylight Sensor & controller
AR - air return (for grid only)
+EM - emergency light circuit
TB15 - t-bar 15/16"
WIRELESS
CP - Chicago Plenum
+NL - night light circuit
ST - screw slot t-bar
EWC - EnOcean Wireless Controller
CU - custom
+GTD - generator transfer device
DF - drywall kit
LMC - Lutron Motion Controller
+M - master (consult factory)
LDC - Lutron Daylight Controller
+S - satellite (consult factory)
See page 6 for ordering code detailed information
CROSS SECTION
OPTICS
4"
23 7/8" with flanges
24" between T-bars
NOVRF - nova flat t-bar 9/16
NOVRS - nova slope
4"
23 7/8" with flanges
24" between T-bars
NOVRS - nova slope t-bar 9/16
NOVRF - nova flat
File Name: NOVA24-FLU-RECESSED-SPEC
Page: 1 / 7
www.lumenwerx.com (T) 514-225-4304 (F) 514-931-4862 © All rights are reserved to LumenWerx ULC.
LumenWerx ULC. reserves the right to change or modify product specifications without notification
August 7, 2016
NOVA24
RECESSED
W W W . L U M E N W E R X . C O M
NOVA FLAT - 1 LAMP
NOVA SLOPE - 1 LAMP
NOVA FLAT - TG9 - tegular 9/16"
NOVA SLOPE - TG9 - tegular 9/16"
4"
4"
23 7/8" with flanges
24" between T-bars
23 7/8" with flanges
24" between T-bars
NOVA FLAT - TG15 - tegular 15/16"
NOVA SLOPE - TG15 - tegular 15/16"
4"
4"
23 7/8" with flanges
24" between T-bars
23 7/8" with flanges
24" between T-bars
NOVA FLAT - TB9 - t-bar 9/16"
NOVA SLOPE - TB9 - t-bar 9/16"
4"
4"
23 7/8" with flanges
24" between T-bars
23 7/8" with flanges
24" between T-bars
NOVA FLAT - TB15 - t-bar 15/16"
NOVA SLOPE - TB15 - t-bar 15/16"
4"
4"
23 7/8" with flanges
24" between T-bars
23 7/8" with flanges
24" between T-bars
NOVA FLAT - ST- screw slot t-bar
NOVA SLOPE - ST- screw slot t-bar
4"
4"
23 7/8" with flanges
24" between T-bars
23 7/8" with flanges
24" between T-bars
NOVA FLAT - DW- drywall kit
NOVA SLOPE - DW- drywall kit
23"
23"
4"
1 3/4"
4"
1 3/4"
24 25/32" hole
25 3/8" Mounting kit
File Name: NOVA24-FLU-RECESSED-SPEC
24 25/32" hole
25 3/8" Mounting kit
Page: 2 / 7
www.lumenwerx.com (T) 514-225-4304 (F) 514-931-4862 © All rights are reserved to LumenWerx ULC.
LumenWerx ULC. reserves the right to change or modify product specifications without notification
August 7, 2016
NOVA24
RECESSED
W W W . L U M E N W E R X . C O M
NOVA FLAT - 2 LAMPS
NOVA SLOPE - 2 LAMPS
NOVA FLAT - TG9 - tegular 9/16"
NOVA SLOPE - TG9 - tegular 9/16"
4"
4"
23 7/8" with flanges
24" between T-bars
23 7/8" with flanges
24" between T-bars
NOVA FLAT - TG15 - tegular 15/16"
NOVA SLOPE - TG15 - tegular 15/16"
4"
4"
23 7/8" with flanges
24" between T-bars
23 7/8" with flanges
24" between T-bars
NOVA FLAT - TB9 - t-bar 9/16"
NOVA SLOPE - TB9 - t-bar 9/16"
4"
4"
23 7/8" with flanges
24" between T-bars
23 7/8" with flanges
24" between T-bars
NOVA FLAT - TB15 - t-bar 15/16"
NOVA SLOPE - TB15 - t-bar 15/16"
4"
4"
23 7/8" with flanges
24" between T-bars
23 7/8" with flanges
24" between T-bars
NOVA FLAT - ST- screw slot t-bar
NOVA SLOPE - ST- screw slot t-bar
4"
4"
23 7/8" with flanges
24" between T-bars
23 7/8" with flanges
24" between T-bars
NOVA FLAT - DW- drywall kit
NOVA SLOPE - DW- drywall kit
23"
23"
4"
1 3/4"
4"
1 3/4"
24 25/32" hole
25 3/8" Mounting kit
File Name: NOVA24-FLU-RECESSED-SPEC
24 25/32" hole
25 3/8" Mounting kit
Page: 3 / 7
www.lumenwerx.com (T) 514-225-4304 (F) 514-931-4862 © All rights are reserved to LumenWerx ULC.
LumenWerx ULC. reserves the right to change or modify product specifications without notification
August 7, 2016
NOVA24
RECESSED
W W W . L U M E N W E R X . C O M
NOVA FLAT - 3 LAMPS
NOVA SLOPE - 3 LAMPS
NOVA FLAT - TG9 - tegular 9/16"
NOVA SLOPE - TG9 - tegular 9/16"
4"
4"
23 7/8" with flanges
24" between T-bars
23 7/8" with flanges
24" between T-bars
NOVA FLAT - TG15 - tegular 15/16"
NOVA SLOPE - TG15 - tegular 15/16"
4"
4"
23 7/8" with flanges
24" between T-bars
23 7/8" with flanges
24" between T-bars
NOVA FLAT - TB9 - t-bar 9/16"
NOVA SLOPE - TB9 - t-bar 9/16"
4"
4"
23 7/8" with flanges
24" between T-bars
23 7/8" with flanges
24" between T-bars
NOVA FLAT - TB15 - t-bar 15/16"
NOVA SLOPE - TB15 - t-bar 15/16"
4"
4"
23 7/8" with flanges
24" between T-bars
23 7/8" with flanges
24" between T-bars
NOVA FLAT - ST- screw slot t-bar
NOVA SLOPE - ST- screw slot t-bar
4"
4"
23 7/8" with flanges
24" between T-bars
23 7/8" with flanges
24" between T-bars
NOVA FLAT - DW- drywall kit
NOVA SLOPE - DW- drywall kit
23"
23"
4"
1 3/4"
4"
1 3/4"
24 25/32" hole
25 3/8" Mounting kit
File Name: NOVA24-FLU-RECESSED-SPEC
24 25/32" hole
25 3/8" Mounting kit
Page: 4 / 7
www.lumenwerx.com (T) 514-225-4304 (F) 514-931-4862 © All rights are reserved to LumenWerx ULC.
LumenWerx ULC. reserves the right to change or modify product specifications without notification
August 7, 2016
NOVA24
RECESSED
W W W . L U M E N W E R X . C O M
ELECTRICAL CIRCUITS
BLK
HOT (CIRCUIT-1)
WHT
GRN
RED
NEUTRAL (CIRCUIT -1)
GROUND (CIRCUIT-1)
UNSWITCHED HOT
1 CIRCUIT
RAPID START 1 Circuit + Emergency Circuit
BLK
WHT
GRN
EM
ORG
WHT
GRN
HOT (CIRCUIT-1)
NEUTRAL (CIRCUIT -1)
GROUND (CIRCUIT-1)
GRN
PPL
GRY
GROUND
DIM(+) 0-10V
DIM(-) 0-10V
1 CIRCUIT
HOT (CIRCUIT-1)
NEUTRAL (CIRCUIT -1)
PPL
GRY
PPL
HOT (CIRCUIT-1)
NEUTRAL (CIRCUIT -1)
GROUND
UNSWITCHED HOT
DIM(+) 0-10V
DIM(-) 0-10V
NOTE: MUST FOLLOW WIRE SIZE
AND MAXIMUM LENGTH FOR
DIMMING APPLICATIONS.
HOT (EM)
NEUTRAL (EM)
GROUND (EM)
BLK
WHT
GRN
ORG
RED
HOT
NEUTRAL
GROUND
HOT DIMMING
UNSWITCHED HOT
PPL
GRY
E1
E2
LUTRON ECOSYSTEM H 1 Circuit
1 CIRCUIT
BLK
HOT (CIRCUIT-1)
NEUTRAL (CIRCUIT -1)
GROUND (CIRCUIT-1)
HOT (CIRCUIT-2)
WHT
GRN
PPL
GRY
HOT
NEUTRAL
GROUND
E1 To EcoSystem
Digital Link
E2
NOTE: MUST FOLLOW WIRE SIZE
AND MAXIMUM LENGTH FOR
DIMMING APPLICATIONS.
LUTRON ECOSYSTEM H 1 Circuit + Emergency Battery
1 CIRCUIT+EB
2 CIRCUITS
To EcoSystem
Digital Link
NOTE: MUST FOLLOW WIRE SIZE
AND MAXIMUM LENGTH FOR
DIMMING APPLICATIONS.
RAPID START 2 Circuits
GRN
RED
GROUND
HOT DIMMING
E1 To EcoSystem
Digital Link
E2
LUTRON Hi-Lume 3D 1 Circuit+ Emergency Battery
NOTE: USE SEPARATE RACEWAY
IN THE FIXTURE FOR EMERGENCY
CIRCUIT
BLK
WHT
HOT
NEUTRAL
NOTE: MUST FOLLOW WIRE SIZE
AND MAXIMUM LENGTH FOR
DIMMING APPLICATIONS.
DIMMING 0-10V 1 Circuit + Emergency Battery
RED
ORG
GRY
NOTE: MUST FOLLOW WIRE SIZE
AND MAXIMUM LENGTH FOR
DIMMING APPLICATIONS.
BLK
WHT
GRN
BLK
WHT
GRN
1 CIRCUIT+EB
1 CIRCUIT+EB
RAPID START 1 Circuit + Emergency Battery
BLK
WHT
LUTRON Hi-Lume 3D 1 Circuit
ECOSYSTEM
HOT (CIRCUIT-1)
NEUTRAL (CIRCUIT -1)
GROUND
1 CIRCUIT+EB
1 CIRCUIT
BLK
WHT
GRN
1 CIRCUIT
DIMMING 0-10V 1 Circuit
RAPID START 1 Circuit
BLK
WHT
GRN
HOT
NEUTRAL
GROUND
RED
UNSWITCHED HOT
E1 To EcoSystem
Digital Link
E2
PPL
GRY
NOTE: MUST FOLLOW WIRE SIZE
AND MAXIMUM LENGTH FOR
DIMMING APPLICATIONS.
File Name: NOVA24-FLU-RECESSED-SPEC
Page: 5 / 7
www.lumenwerx.com (T) 514-225-4304 (F) 514-931-4862 © All rights are reserved to LumenWerx ULC.
LumenWerx ULC. reserves the right to change or modify product specifications without notification
August 7, 2016
NOVA24
RECESSED
W W W . L U M E N W E R X . C O M
OPTICS
A separate kit for mounting fixtures into drywall
CENTER LENS - PRECISION MICRO-PRISM-OPTIC (PMO) - utilizes a specially
ceilings
designed catadioptric lens that combines refraction and internal reflection. The
48 25/32"
Drywall hole
square-base prism is 24% the size of those used in a high-performance fluorescent
lens. The exclusive two-dimensional array of prisms is designed to eliminate the
glare found at higher viewing angles and as such, enables a glare cut-off at a 45º
viewing angle.
The acrylic material itself is untinted, relying entirely on catadioptric control for
24
25/32"
Drywall
hole
25 3/8"
Drywall kit
flange to
flange
effective source obscuration. A highly efficient TIR process at the acrylic-air
Power
interface on the prism surfaces redirects incident light with less than a 0.1% loss
49 3/8"
Drywall kit flange to flange
per reflection. As a result, these LumenWerx optics attain a high optical efficiency
greater than 90%, while maintaining visual comfort at normal viewing angles and
presenting a pleasing luminous appearance.
SIDE LENS - HIGH EFFICIENCY LAMBERTIAN OPTIC (HLO) - shielding of
diffusing 0.075" thick acrylic with up to 88% transmission and good source
obscuration.
DF - drywall kit
ELECTRICAL
Universal input voltages with multiple control schemes offered. Consult factory for
FINISH
availability.
Interior reflectors - 95% reflective, matte white
powder coating
EMERGENCY
Factory installed long life high temperature recyclable Ni-Cad battery pack with test
Exterior - matte white powder coating.
switch and charge indicator, minimum of 90 minutes operation. Recharge time of
Custom finish is also available.
24 hours.
CONTROLS
MOUNTING OPTIONS
LumenWerx offers several options for integrating
Recess mount into exposed or concealed T-Bar or Tegular grid ceiling
motion and daylight controls into NOVA luminaires.
Wireless options incorporate a wireless
controller/powerpack into the luminaire, which
receives signals from a wireless sensor (by others)
installed in the space. The advantages of the
wireless option include greater flexibility of control
options, sensor coverage, and system integration.
TG9 - tegular 9/16"
TG15 - tegular 15/16"
TB9 - t-bar 9/16"
Onboard options incorporate both the sensor and
controller/powerpack. Onboard sensors, while
inherently simpler, have limitations of control and
coverage.
TB15 - t-bar 15/16"
ST - screw slot t-bar
File Name: NOVA24-FLU-RECESSED-SPEC
Page: 6 / 7
www.lumenwerx.com (T) 514-225-4304 (F) 514-931-4862 © All rights are reserved to LumenWerx ULC.
LumenWerx ULC. reserves the right to change or modify product specifications without notification
August 7, 2016
NOVA24
RECESSED
W W W . L U M E N W E R X . C O M
CONSTRUCTION
Onboard
Onboard Motion Sensor and power pack (OMS) provide automatic on and
automatic off control, using PIR detection. Sensor is designed to detect finemotion when installed within 6' of occupants.
Onboard Daylight Sensor and controller (ODS) provide input for 0-10V dimming
drivers. Separate switched control of line input is required for on/off control.
Housing - Die formed cold rolled sheet steel 20
gauge thick, matte white powder coating.
Reflectors - Cold rolled steel 0.030" thick precisely
die formed, 95% reflective matte white painted.
Interior brackets - Die formed cold rolled sheet
steel 20 gauge thick.
Center basket - Extruded Aluminum 0.07" nominal,
matte white and lens made in clear PMMA precisely
formed into optical micro-structures forms.
Side lenses - Frost impact acrylic lens 88%
transmissive.
Drywall kit - Extruded Aluminum 0.07" nominal,
matte white powder coating.
1 1/2"
Location of an Onboard sensor
Wireless
EnOcean Wireless Controller (EWC) provides both a power pack for presence
detection control and a 0-10V interface for daylight harvesting. EnOcean wireless
sensors (by others) mounted in the room signal the onboard EWC. This option
permits manual on/automatic off (vacancy) control.
Lutron Motion Controller (LMC) and Lutron Daylight Controller (LDC) provide
inputs to Ecosystem drivers. Compatible Lutron wireless motion and daylight
sensors (by others) mounted in the room signal onboard LPC or LDC. This option
permits manual on/automatic off (vacancy) control.
WEIGHT
36.23lbs.+3.74lbs. (drywall kit) - 16.45kg+1.7 kg
(drywall kit)
CERTIFICATIONS
ETL - Rated for Dry/Damp locations. Conforms to UL
Standard 1598 and certified to CAN/CSA Standard
C22.2 No. 250.0.
Chicago plenum - City of Chicago Approved (CCEA)
IC rated - suitable for direct contact with insulation.
OPTIONS
The air return option consists in a discreet, yet efficient, slot pattern integrated into
the side flanges of the luminaire, allowing the airflow to exhaust into plenum space,
creating a clean, pleasant look of the ceiling.
5/8"
Air Return
File Name: NOVA24-FLU-RECESSED-SPEC
Page: 7 / 7
www.lumenwerx.com (T) 514-225-4304 (F) 514-931-4862 © All rights are reserved to LumenWerx ULC.
LumenWerx ULC. reserves the right to change or modify product specifications without notification
August 7, 2016