NOVA22 LED
RECESSED
W W W . L U M E N W E R X . C O M
PROJECT:
APPROVED BY:
SIGNATURE:
Grid - shown with a Nova flat lens
Grid - shown with a Nova Slope lens
TYPE
QTY
DESCRIPTION
Nova is an efficient architectural LED troffer with a distinctive luminous shielding that distributes gentle
brightness from the sides of its central optical element. Using advanced LED engines, Nova provides
highly efficient illumination and offers comprehensive ceiling, electrical, and controls options in 2x2, 1x4,
and 2x4 sizes. Nova is available with both Flat and Slope side diffusers.
See separate spec sheets for other available mountings.
up to 117 lm/w performance
IC RATED
ORDER GUIDE
22
PMO
HLO
LED
LUMINAIRE ID
SIZE
CENTER OPTICS
SIDE OPTICS
LIGHT SOURCE
CRI
LUMEN PACKAGES
COLOR TEMP.
NOVRF - nova recessed flat
22 - 2'x2'
PMO - Precision
HLO - High-Efficiency
LED - high
80 - 80CRI
2300 - low output 2300lm
30 - 3000k
Micro-Prism Optic
Lambertian Optic
performance LED
90 - 90CRI
3200 - medium output 3200lm
35 - 3500k
4200 - high output 4200lm
40 - 4000k
NOVRS - nova recessed slope
VOLTAGE
DRIVER
ELECTRICAL
MOUNTING
FINISH
CONTROLS
120 - 120V
D - dimming 0-10V
1 - 1 circuit
TG9 - tegular 9/16"
W - matte white
ONBOARD
277 - 277V
DA - Dali
+EB - emergency battery pack
TG15 - tegular 15/16"
CF# - custom finish
OMS - Motion Sensor & power pack
UNV - 120V-277V
LA2- Lutron Hi-Lume A - 2 wires 120V
+EM - emergency light circuit
TB9 - t-bar 9/16"
specify RAL#
ODS - Daylight Sensor & controller
347 - 347V
LA3 - Lutron Hi-Lume A - 3 wires /EcoS
+NL - night light circuit
TB15 - t-bar 15/16"
WIRELESS
LEH - Lutron EcoSystem H
+GTD - generator transfer
ST - screw slot t-bar
EWC - EnOcean Wireless Controller
LE5 - Lutron EcoSystem 5
device
DF - drywall kit
LMC - Lutron Motion Controller
OTH - other (consult factory)
+M - master (consult factory)
LDC - Lutron Daylight Controller
+S - satellite (consult factory)
See page 4 for ordering code detailed information
OPTIONS
FU - fuse
FWC - flexible whip cable (6' std)
AR - air return (for grid only)
CP - Chicago Plenum
OPTICS
CU - custom
CROSS SECTION
4"
23 7/8" with flanges
24" between T-bars
NOVRS - nova slope
NOVRF - nova flat t-bar 9/16
4"
23 7/8" with flanges
24" between T-bars
NOVRS - nova slope t-bar 9/16
File Name: NOVA22-RECESSED-SPEC
NOVRF - nova flat
Page: 1 / 6
www.lumenwerx.com (T) 514-225-4304 (F) 514-931-4862 © All rights are reserved to LumenWerx ULC.
LumenWerx ULC. reserves the right to change or modify product specifications without notification
August 7, 2016
NOVA22 LED
RECESSED
W W W . L U M E N W E R X . C O M
NOVA FLAT
NOVA SLOPE
NOVA FLAT - TG9 - tegular 9/16"
NOVA SLOPE - TG9 - tegular 9/16"
4"
4"
23 7/8" with flanges
24" between T-bars
23 7/8" with flanges
24" between T-bars
NOVA FLAT - TG15 - tegular 15/16"
NOVA SLOPE - TG15 - tegular 15/16"
4"
4"
23 7/8" with flanges
24" between T-bars
23 7/8" with flanges
24" between T-bars
NOVA FLAT - TB9 - t-bar 9/16"
NOVA SLOPE - TB9 - t-bar 9/16"
4"
4"
23 7/8" with flanges
24" between T-bars
23 7/8" with flanges
24" between T-bars
NOVA FLAT - TB15 - t-bar 15/16"
NOVA SLOPE - TB15 - t-bar 15/16"
4"
4"
23 7/8" with flanges
24" between T-bars
23 7/8" with flanges
24" between T-bars
NOVA FLAT - ST- screw slot t-bar
NOVA SLOPE - ST- screw slot t-bar
4"
4"
23 7/8" with flanges
24" between T-bars
23 7/8" with flanges
24" between T-bars
NOVA FLAT - DW- drywall kit
NOVA SLOPE - DW- drywall kit
23"
23"
4"
1 3/4"
4"
1 3/4"
24 25/32" hole
25 3/8" Mounting kit
File Name: NOVA22-RECESSED-SPEC
24 25/32" hole
25 3/8" Mounting kit
Page: 2 / 6
www.lumenwerx.com (T) 514-225-4304 (F) 514-931-4862 © All rights are reserved to LumenWerx ULC.
LumenWerx ULC. reserves the right to change or modify product specifications without notification
August 7, 2016
NOVA22 LED
RECESSED
W W W . L U M E N W E R X . C O M
ELECTRICAL CIRCUITS
LUTRON Hi-LUME A 2 wires 1 Circuit
HOT (CIRCUIT-1)
NEUTRAL (CIRCUIT -1)
GRN
PPL
GRY
GROUND
DIM(+) 0-10V
DIM(-) 0-10V
NOTE: MUST FOLLOW WIRE SIZE
AND MAXIMUM LENGTH FOR
DIMMING APPLICATIONS.
BLK
HOT
WHT
NEUTRAL
GRN
GROUND
LUTRON ECOSYSTEM H 1 Circuit
BLK
1 CIRCUIT
BLK
WHT
1 CIRCUIT
1 CIRCUIT
DIMMING 0-10V 1 Circuit
NOTE: MUST FOLLOW WIRE SIZE
AND MAXIMUM LENGTH FOR
DIMMING APPLICATIONS.
WHT
GRN
PPL
GRY
HOT
NEUTRAL
GROUND
E1 To EcoSystem
Digital Link
E2
NOTE: MUST FOLLOW WIRE SIZE
AND MAXIMUM LENGTH FOR
DIMMING APPLICATIONS.
PPL
GRY
NEUTRAL
GRN
GROUND
RED
UNSWITCHED HOT
NOTE: MUST FOLLOW WIRE SIZE
AND MAXIMUM LENGTH FOR
DIMMING APPLICATIONS.
BLK
WHT
GRN
ORG
PPL
GRY
BLK
WHT
GRN
RED
PPL
GRY
HOT
NEUTRAL
GROUND
UNSWITCHED HOT
E1 To EcoSystem
Digital Link
E2
NOTE: MUST FOLLOW WIRE SIZE
AND MAXIMUM LENGTH FOR
DIMMING APPLICATIONS.
LUTRON Hi-LUME A 3 wires 1 Circuit
1 CIRCUIT
NOTE: MUST FOLLOW WIRE SIZE
AND MAXIMUM LENGTH FOR
DIMMING APPLICATIONS.
WHT
1 CIRCUIT+EB
RED
HOT (CIRCUIT-1)
NEUTRAL (CIRCUIT -1)
GROUND
UNSWITCHED HOT
DIM(+) 0-10V
DIM(-) 0-10V
HOT
HOT
NEUTRAL
GROUND
HOT DIMMING
E1 To EcoSystem
Digital Link
E2
NOTE: MUST FOLLOW WIRE SIZE
AND MAXIMUM LENGTH FOR
DIMMING APPLICATIONS.
LUTRON Hi-LUME A 3 wires 1 Circuit+ Emergency Battery
1 CIRCUIT+EB
BLK
WHT
GRN
LUTRON ECOSYSTEM H 1 Circuit + Emergency Battery
BLK
BLK
WHT
GRN
ORG
RED
HOT
NEUTRAL
GROUND
HOT DIMMING
UNSWITCHED HOT
ECOSYSTEM
1 CIRCUIT+EB
DIMMING 0-10V 1 Circuit + Emergency Battery
1 CIRCUIT+EB
LUTRON Hi-LUME A 2 wires 1 Circuit + Emergency Battery
PPL
GRY
E1
E2
To EcoSystem
Digital Link
NOTE: MUST FOLLOW WIRE SIZE
AND MAXIMUM LENGTH FOR
DIMMING APPLICATIONS.
File Name: NOVA22-RECESSED-SPEC
Page: 3 / 6
www.lumenwerx.com (T) 514-225-4304 (F) 514-931-4862 © All rights are reserved to LumenWerx ULC.
LumenWerx ULC. reserves the right to change or modify product specifications without notification
August 7, 2016
NOVA22 LED
RECESSED
W W W . L U M E N W E R X . C O M
OPTICS
MOUNTING OPTIONS
CENTER LENS - PRECISION MICRO-PRISM-OPTIC (PMO) - utilizes a specially
Recess mount into exposed or concealed T-Bar or
designed catadioptric lens that combines refraction and internal reflection. The
Tegular grid ceiling
square-base prism is 24% the size of those used in a high-performance fluorescent
lens. The exclusive two-dimensional array of prisms is designed to eliminate the
glare found at higher viewing angles and as such, enables a glare cut-off at a 45º
viewing angle.
The acrylic material itself is untinted, relying entirely on catadioptric control for
effective source obscuration. A highly efficient TIR process at the acrylic-air
interface on the prism surfaces redirects incident light with less than a 0.1% loss
per reflection. As a result, these LumenWerx optics attain a high optical efficiency
TG9 - tegular 9/16"
TG15 - tegular 15/16"
TB9 - t-bar 9/16"
TB15 - t-bar 15/16"
greater than 90%, while maintaining visual comfort at normal viewing angles and
presenting a pleasing luminous appearance.
SIDE LENS - HIGH EFFICIENCY LAMBERTIAN OPTIC (HLO) - shielding of
diffusing 0.075" thick acrylic with up to 88% transmission and good source
obscuration.
LIGHT SOURCE - LED
Custom Linear array of mid-flux LED’s are mounted directly to the housing for
optimal thermal performance. Available in 3000K, 3500K and 4000K with a
minimum 80 CRI and an option for 90 CRI with elevated R9 value. Color consistency
maintained to within 3 SDCM. LEDs operated at reduced drive current to optimize
efficacy and lumen maintenance.
All LEDs have been tested in accordance with IESNA LM-80-08 and the results
have shown L80 lumen maintenance greater than 60,000 hours. Absolute product
photometry is measured and presented in accordance with IESNA LM-79, unless
otherwise indicated.
LED output
Color Temp
Watts
Nominal Delivered
Lumens
Efficacy
low output
4000K
20
2300
117
medium output
4000K
29
3200
112
high output
4000K
38
4200
110
ST - screw slot t-bar
A separate kit for mounting fixtures into drywall
ceilings
24 25/32"
Drywall hole
LPW
25 3/8"
24
Drywall kit 25/32"
flange to Drywall
flange
hole
ELECTRICAL
Factory-set adjustable output current electronic driver with 120-277V AC line input.
Power
Dimmable from at least 100%-5% with 0-10V control. Rated life (90% survivorship)
of 50,000 hours at 50ºC max. ambient (and 70ºC max. case) temperature. At
maximum driver load: Efficiency>84%, PF>0.9, THD<20%. Other specifiable options
include Lutron Hi-Lume A (specify 2, 3 or 4 wires), EcoSystem H (100%-1%, fade-toblack) and EcoSystem 5 (100%-5%) dimmable drivers and DALI protocol drivers.
DF - drywall kit
EMERGENCY
Factory installed long life high temperature recyclable Ni-Cad battery pack with test
switch and charge indicator, minimum of 90 minutes operation, up to 1300 lumens
(25ºC) emergency lighting output. Recharge time of 24 hours.
File Name: NOVA22-RECESSED-SPEC
Page: 4 / 6
www.lumenwerx.com (T) 514-225-4304 (F) 514-931-4862 © All rights are reserved to LumenWerx ULC.
LumenWerx ULC. reserves the right to change or modify product specifications without notification
August 7, 2016
NOVA22 LED
RECESSED
W W W . L U M E N W E R X . C O M
FINISH
CONSTRUCTION
Interior reflectors - 95% reflective, matte white powder coating
Housing - Die formed cold rolled sheet steel 20
Exterior - matte white powder coating.
gauge thick, matte white powder coating.
Custom finish is also available.
Reflectors - Cold rolled steel 0.030" thick precisely
die formed, 95% reflective matte white painted.
CONTROLS
Interior brackets - Die formed cold rolled sheet
LumenWerx offers several options for integrating motion and daylight controls into
steel 20 gauge thick.
NOVA luminaires. Wireless options incorporate a wireless controller/powerpack
Center basket - Extruded Aluminum 0.07" nominal,
into the luminaire, which receives signals from a wireless sensor (by others)
matte white and lens made in clear PMMA precisely
installed in the space. The advantages of the wireless option include greater
formed into optical micro-structures forms.
flexibility of control options, sensor coverage, and system integration. Onboard
Side lenses - Frost impact acrylic lens 88%
options incorporate both the sensor and controller/powerpack. Onboard sensors,
transmissive.
while inherently simpler, have limitations of control and coverage.
Drywall kit - Extruded Aluminum 0.07" nominal,
Onboard
matte white powder coating.
Onboard Motion Sensor and power pack (OMS)
provide automatic on and automatic off control,
WEIGHT
using PIR detection. Sensor is designed to detect
16.52lbs.+2.51lbs. (drywall kit) - 7.5kg+1.14kg (drywall kit)
fine-motion when installed within 6' of occupants.
CERTIFICATIONS
Onboard Daylight Sensor and controller (ODS)
provide input for 0-10V dimming drivers. Separate
ETL - Rated for Dry/Damp locations. Conforms to UL
switched control of line input is required for on/off
Standard 1598 and certified to CAN/CSA Standard
control.
C22.2 No. 250.0.
1 1/2"
Location of an Onboard sensor
DLC - Testing to DLC requirements, for this product,
have been completed by an Accredited Laboratory
Wireless
and certified by DLC.
EnOcean Wireless Controller (EWC) provides both a power pack for presence
Lighting facts - testing products and reporting
detection control and a 0-10V interface for daylight harvesting. EnOcean wireless
performance results according to industry
sensors (by others) mounted in the room signal the onboard EWC. This option
standards.
permits manual on/automatic off (vacancy) control.
Chicago plenum - City of Chicago Approved (CCEA)
Lutron Motion Controller (LMC) and Lutron Daylight Controller (LDC) provide
IC rated - suitable for direct contact with insulation.
inputs to Ecosystem drivers. Compatible Lutron wireless motion and daylight
sensors (by others) mounted in the room signal onboard LPC or LDC. This option
WARRANTY
permits manual on/automatic off (vacancy) control.
LumenWerx provides a five-year limited warranty
of electrical and mechanical performance of the
OPTIONS
luminaires, including the LED boards, drivers, and
The air return option consists in a discreet, yet
auxiliary electronics. LumenWerx will repair or
replace defective luminaires or components at our
efficient, slot pattern integrated into the side
discretion, provided they have been installed and
flanges of the luminaire, allowing the airflow
operated in accordance with our specifications.
to exhaust into plenum space, creating a clean,
Other limitations apply, please refer to the full
pleasant look of the ceiling.
warranty on our website.
5/8"
Air Return
File Name: NOVA22-RECESSED-SPEC
Page: 5 / 6
www.lumenwerx.com (T) 514-225-4304 (F) 514-931-4862 © All rights are reserved to LumenWerx ULC.
LumenWerx ULC. reserves the right to change or modify product specifications without notification
August 7, 2016
NOVA22 LED
RECESSED
W W W . L U M E N W E R X . C O M
2300 LUMEN AT 80CRI - LOW OUTPUT
1500
1500
1200
1200
PERFORMANCE
LED output
900
900
251
600
503
Color
Temp
Watts
Nominal
Delivered Lumens
LPW
Efficacy
low output
3000K
20
2300
115
low output
3500K
20
2300
115
low output
4000K
20
2300
117
Color
Temp
Watts
Nominal
Delivered Lumens
LPW
medium output
3000K
29
3200
110
medium output
3500K
29
3200
110
medium output
4000K
29
3200
112
Color
Temp
Watts
Nominal
Delivered Lumens
LPW
high output
3000K
39
4200
108
high output
3500K
39
4200
108
high output
4000K
38
4200
110
600
754
300
1006
300
3200 LUMEN AT 80CRI - MEDIUM OUTPUT
1500
1500
1200
1200
PERFORMANCE
LED output
900
900
351
600
703
Efficacy
600
1054
300
1405
300
4200 LUMEN AT 80CRI - HIGH OUTPUT
1500
1500
1200
1200
PERFORMANCE
LED output
900
900
461
600
922
Efficacy
600
1383
300
1843
300
File Name: NOVA22-RECESSED-SPEC
Page: 6 / 6
www.lumenwerx.com (T) 514-225-4304 (F) 514-931-4862 © All rights are reserved to LumenWerx ULC.
LumenWerx ULC. reserves the right to change or modify product specifications without notification
August 7, 2016