Oil & Gas Production Measurement Solutions
Superior flow and density measurement
Best-in-Class Flow & Density Measurement
for Upstream Production
only from Emerson Process Management®
Emerson’s flow, density and viscosity measurement
solutions are the best-in-class standard for a broad range of
upstream applications, delivering unparalleled performance
that results in maintenance-free, precise measurement
and reliable control.
Emerson helps to solve your Upstream
Production Challenges
Accurate, Real-time Data
Optimize well and field production, allocation,
and characterization
Proven Field Reliability
Continued and uninterrupted data for early problem
detection and improved availability of wells and facilities
Lower Cost of Ownership
Satisfy budget constraints while minimizing maintenance
cost and operational effort
Process and Diagnostic Information
Rapid trouble shooting and abnormal situation
identification to allow for higher value maintenance
practice
Inherent Advantages of Emerson Flow
Technologies
•In-line flow and density devices measure all fluids,
slurries and gases with one instrument
•Minimal or no straight-run required to reduce installation
space requirements
•Simple and fast installation and commissioning
•Smart Meter Verification eliminates the need for
periodic and disruptive calibration checks
TM
•Smart Wireless THUM on measurement devices
reduces wiring and installation costs while providing
remote access to advanced diagnostics
•Broad range of products provide fit for purpose
measurement performance at lower total cost of
ownership
Maximize your Upstream Production with Emerson Flow & Density Measurement
Production Management
Natural Gas Treatment/Compression
Gas Injection
Low Temp
Separator
Compression
Fuel Gas
Gas Lift
To Storage
Dehydration/
Acid Gas Removal
Production
Separator
Oil & Gas
Production
Vapor Recovery
Chemical Injection
To Gathering
Condensate
Stabilizer
Gathering and
Custody Transfer
Test Separator
Water
Injection
Oil Treatment and Storage
Water Treatment
Enhanced Oil Recovery
EOR
Thermal
EOR
Chemical or
Miscible
Steam Boiler
LACT
Tank Dewatering
Fuel Gas
GAS
Chemical Storage
OIL
WATER
To Pipeline
Coriolis, Magnetic or Vortex Flowmeter
Coriolis Flowmeter
Vortex Flowmeter
Density
Production Management
Direct Well Measurement
•Most reliable and accurate measurement of production
rates and fluid quality
•Reduce operations cost with in-situ Smart Meter
Verification and maintenance free meters
Test and Production Separation Measurement
•Flow, density, net oil and water cut measurement
in one device for reliable, real time production surveillance
•Early detection of well problems and separator efficiency
with more accurate, reliable well production data
Water Cut and Net Oil Measurement
Oil Treatment and Storage
Oil Treatment
•Maximize oil recovery and product quality by optimizing
treatment system performance with improved measurement
and control
•Improve mass balance and treatment efficiency with
continuous process information and abnormal situation
detection
Vapor Recovery
•Flow and density based water cut measurement
•Meet regulatory and internal requirements while capturing
rich hydrocarbon gases
•Simplified integration with single electronics and flow
computer packages
•Low maintenance and reduced operator intervention to
improve payback on VRU installations
Gas Lift Production Measurement Dewatering and Product Transfer
•Increase hydrocarbon liquids production
•Reduce regulatory risk, operator exposure and operating
expenses
•Reduce lift costs and cost of ownership with simplified,
accurate measurement
Water Injection
•Maintain efficient sweep pattern
•Avoid fluid breakthrough or channeling
•Accurate interface and product transfer measurement from
a single device
Gathering and Custody Transfer
Pipeline custody transfer measurement
Chemical Injection
•Reliable and accurate mass dosing for down hole,
pipeline and oil and water treatment to minimize
chemical usage and maximize effectiveness
•Direct density measurement for quality assurance
and blend optimization
Enhanced Oil Recovery
Miscible, Immiscible, and Chemical Injection
•CO2 Breakthrough Detection on gas wells
•Reduce complexity with wide flow rate monitoring
and single meter for WAG injection wells
Flood Fluid Material Supply and Recovery
•Optimize recovery of EOR fluids and diluents
•Accurately monitor and account for flood materials
•Continuous, accurate and reliable measurement of crude oil,
natural gas and NGLs minimizes sources of error and
accounting liability
• Lower cost of ownership with comparable capital costs and
minimal maintenance requirements
• Sustained measurement performance over time ideal
for pipeline, LACT units and loading/unloading applications
(truck, rail and marine)
Natural Gas Treatment / Compression
NGL recovery and stabilization
•Accurate control and mass balance
•Improve condensate quality and reduce operating
expense
Dehydrator control
•Optimize glycol regeneration and recirculation rates
Thermal
•Eliminate glycol losses and improve environmental
compliance
•Optimize steam injection rate to maximize effectiveness
Compressor fuel management
•Reduce steam and energy waste with accurate
injection rates
•Direct mass measurement enables inferred energy
rate for optimal air to fuel mix
•Improve environmental emissions compliance and
reduced fuel consumption
World-class Flow & Density Measurement
delivers the performance you
need
Designed for Accuracy and Repeatability
Achieving optimal production and maximum output in a controlled and safe
environment is the hallmark of best-in-class upstream oil and gas applications.
Traditional upstream oil and gas applications utilize conventional meters,
which bring risk, maintenance, and overall suboptimal measurement
performance in operations that require more.
For more than 30 years, Emerson's flow and density technology has delivered
exceptional measurement accuracy and performance, regardless of challenging
conditions. With field-proven instrumentation and expert application knowledge,
your upstream business can operate at its peak.
Micro Motion and Rosemount Products for Oil & Gas
Production Measurement
Superior accuracy and
measurement performance for:
• Liquid Mass and Volume Flow
• Gas Flow
• Net Oil Measurement
• Gas Density and Specific Gravity
• Liquid Density and Liquid Viscosity
• Net Volume Correction
• Production Management
- Gas Lift Production
- Gas or Water Injection
- Water Cut and Net Oil
- Well Allocation Measurement
• Enhanced Oil Recovery
• Chemical Injection
• Oil Treatment and Storage
• Gathering and Custody Transfer
• Natural Gas Treatment/Compression
®
ELITE Coriolis Meters
Magnetic Meters
F-Series Coriolis Meters
Vortex Meters
Densitometers
Emerson’s Micro Motion and Rosemount devices are known globally in over
85 countries for quality and reliability. Emerson delivers application expertise,
service and technical support not available elsewhere.
©2012 Micro Motion, Inc. All rights reserved. The Emerson logo is a trademark and service mark of Emerson Electric Co. Rosemount, Micro Motion, ELITE, ProLink, MVD and
MVD Direct Connect marks are marks of one of the Emerson Process Management family of companies. All other marks are property of their respective owners.
Emerson Process Management
Micro Motion
Worldwide Headquarters
7070 Winchester Circle
Boulder, Colorado USA 80301
T: 800 522 6277
T: +1 (303) 527 5200
F: +1 (303) 530 8459
www.micromotion.com
Emerson Process Management
Rosemount Inc.
8200 Market Boulevard
Chanhassen, MN 55317 USA
T: 800 522 6277
www.rosemount.com
Emerson Process Management
Americas
Mexico
Argentina
Brazil
Venezuela
T: 52 55 5809 5300
T: 54 11 4837 7000
T: 55 15 3238 3527
T: 58 26 1792 1858
Europe
Central/Eastern Europe France Germany Italy The Netherlands Belgium
Spain
U.K. Russia/CIS T: +41 41 7686 111
T: 0800 917 901
T: 0800 182 5347
T: 8008 77334
T: +31 318 495 555
T: +32 2 716 77 11
T: +34 913 586 000
T: 0870 240 1978
T: +7 495 981 9811
Asia Pacific
Australia China India Japan Korea Singapore T: (61) 3 9721 0200
T: (86) 21 2892 9000
T: (91) 22 6662 0566
T: (81) 3 5769 6803
T: (82) 2 3438 4600
T: (65) 6 777 8211
Middle East & Africa
Dubai Abu Dhabi
Saudi Arabia
Qatar
South Africa
T: +971 4 811 8100
T: +971 2 697 2000
T: +966 3 814 7560
T: +974 4 457 6777
T: +271 1 974 3336
For a complete list of contact information and websites, please visit: www.emersonprocess.com/home/contacts/global
MC-001256 Rev C 01/2012
00803-0100-6153 Rev AA 01/2012