OPEN SQUARE REFLECTOR
9 3/4˝
(248 MM)
6˝ x 6˝
(152 MM)
7 1/4˝
(157 MM)
Aperture: 6˝ x 6˝ , Ceiling Cutout: 6 1/4˝ x 6 1/4˝, OD: 7 1/4˝
Ceiling insulation must be kept 3˝ away from housing.
Listed for damp locations and wet locations under covered canopy.
Housing
Part #
Tr i m
Description
Part #
Description
Electronic Universal Voltage Ballast
1 Lamp Housing
AVSQ6E118UV - 6˝ x 6˝ 18W (1) lamp 120/277V
AVSQ6E126UV - 6˝ x 6˝ 26W (1) lamp 120/277V
AVSQ6E132UV - 6˝ x 6˝ 32W (1) lamp 120/277V
AVSQ6E142UV - 6˝ x 6˝ 42W (1) lamp 120/277V
AVSQ612SPCL - Specular Clear Alzak® Reflector
AVSQ612SPGO - Specular Gold Alzak® Reflector
AVSQ612SPWT - Specular Wheat Alzak® Reflector
AVSQ612SPPW - Specular Pewter Alzak® Reflector
AVSQ612SPUM - Specular Umber Alzak® Reflector
AVSQ612SPBL - Specular Black Alzak® Reflector
AVSQ612WH
- Matte White Reflector
Lamp Base: Electronic 4 Pin
18W GX24Q-2 26W GX24Q-3 32W GX24Q-3
42W GX24Q-4
More Color Options Available See Page 16
Factory Standard is a Low Iridescent Alzak® finish
Alzak® is a registered trademark of ALCOA
Accessories
EMG
AD7
AD10
- Emergency Battery Back up
- Advance Mark VII Dimming Ballast
- Advance Mark X Dimming Ballast
LD
CB517
CB520
- Lutron Dimming Ballast
- Caddy Bars (517)
- Caddy Bars (520)
FS - Fuse & Holder
Tested and Listed to
ETL/UL standard 1598
and CSA standards.
ENCLOSED SQUARE LENS REFLECTOR
Square “Alzak” aperture trim, die formed, self trimming flange and positive
spring retention clips. Dieformed flange cover eliminates mitred corners while
increasing reflector integrity. Factory standard self trim flange with a white
finish.
UL Listed, 4 pin socket with vented aluminum socket housing.
UL Listed, thermally protected ballast with a reliability factor of 0° F / -18° C
and <10% THD. Ballast mounted to a galvanized steel snap on cover for easy
access and removal.
Precision formed 20 gauge steel housing with adjustable mounting ears.
Prewired electrogalvanized heavy steel junction box listed for through branch
circuit wiring with 1/2˝ & 3/4˝ pryouts.
9 3/4˝
(248 MM)
6˝ x 6˝
(152 MM)
7 1/4˝
(157 MM)
Aperture: 6˝ x 6˝ , Ceiling Cutout: 6 1/4˝ x 6 1/4˝, OD: 7 1/4˝
Ceiling insulation must be kept 3˝ away from housing.
Listed for damp locations and wet locations under covered canopy.
Housing
Part #
Tr i m
Description
Part #
Electronic Universal Voltage Ballast
1 Lamp Housing
AVSQ6E118UV - 6˝ x 6˝ 18W (1) lamp 120/277V
AVSQ6E126UV - 6˝ x 6˝ 26W (1) lamp 120/277V
AVSQ6E132UV - 6˝ x 6˝ 32W (1) lamp 120/277V
AVSQ6E142UV - 6˝ x 6˝ 42W (1) lamp 120/277V
Lamp Base: Electronic 4 Pin
18W GX24Q-2 26W GX24Q-3 32W GX24Q-3
42W GX24Q-4
Description
Tempered C73 Prismatic Lens
AVSQ630SPCL - Specular Clear Alzak® Splay
AVSQ630WH
- Matte White Splay
More Color Options Available See Page 16
Factory Standard is a Low Iridescent Alzak® finish
Alzak® is a registered trademark of ALCOA
Accessories
EMG
AD7
AD10
- Emergency Battery Back up
- Advance Mark VII Dimming Ballast
- Advance Mark X Dimming Ballast
LD
CB517
CB520
- Lutron Dimming Ballast
- Caddy Bars (517)
- Caddy Bars (520)
ARCHITECTURAL STAR LIGHTING, LLC
FS - Fuse & Holder
6˝x6˝
SQ
Architectural Vertical Compact Fluorescent Square
Square “Alzak” aperture trim, die formed, self trimming flange and positive
spring retention clips. Dieformed flange cover eliminates mitred corners while
increasing reflector integrity. Factory standard self trim flange with a white
finish.
UL Listed, 4 pin socket with vented aluminum socket housing.
UL Listed, thermally protected ballast with a reliability factor of 0° F / -18° C
and <10% THD. Ballast mounted to a galvanized steel snap on cover for easy
access and removal.
Precision formed 20 gauge steel housing with adjustable mounting ears.
Prewired electrogalvanized heavy steel junction box listed for through branch
circuit wiring with 1/2˝ & 3/4˝ pryouts.
Tested and Listed to
ETL/UL standard 1598
and CSA standards.
318
6˝ x 6˝ Vertical Compact Fluorescent Square
Architectural Vertical Square Options / Specifications
12 1/8˝
(308 MM)
Additional Product Info
13 1/8˝
(333 MM)
Frame Options
RIF - Radio Interference Filter
CFM - Custom Frame Modifications (consult factory)
Reflector
Single piece hand spun low iridescent Alzak® reflector with standard self
trim flange and a white trim finish. 45° Lamp cutoff allows for a better
visual cutoff then generally available.
High polish flange, white and black trim finish’s available consult
factory.
Socket
UL Listed, 2 pin or 4 pin high thermo plastic socket.
Ballast
UL Listed, thermally protected programed start ballast with a reliability
factor of 0° F / -18° C and <10% THD. End of lamp life (EOL) shutdown
circuit protected.
Ballast mounted to a galvanized snap on cover, mounted to juction box
which is serviceable from below. Programed Start (1.0-1.5 second without
flicker) ballasts are designed to provide max. lamplife in frequent lamp
starting applications.
Frame
Prewired electrogalvanized heavy steel junction box listed for through
branch circuit wiring with 1/2˝ & 3/4˝ pryouts. Electrogalvanized plated
steel housing with adjustable spring steel roto clips allowing for a quick trim
installation.
Housing accomodates any ceilings with a max. thickness of 1 3/4˝
Trim Options
PFL - Polish Flange
FGSK - Flange Gasket
GR - Goof Ring*
* - specify I.D. and O.D. standard white finish
6˝ x 6˝ Vertical Compact Fluorescent Square
12 1/8˝
(308 MM)
Additional Product Info
13 1/8˝
(333 MM)
Frame Options
RIF - Radio Interference Filter
CFM - Custom Frame Modifications (consult factory)
Reflector
Single piece hand spun low iridescent Alzak® reflector with standard self
trim flange and a white trim finish. 45° Lamp cutoff allows for a better
visual cutoff then generally available.
High polish flange, white and black trim finish’s available consult
factory.
Socket
UL Listed, 2 pin or 4 pin high thermo plastic socket.
Ballast
UL Listed, thermally protected programed start ballast with a reliability
factor of 0° F / -18° C and <10% THD. End of lamp life (EOL) shutdown
circuit protected.
Ballast mounted to a galvanized snap on cover, mounted to juction box
which is serviceable from below. Programed Start (1.0-1.5 second without
flicker) ballasts are designed to provide max. lamplife in frequent lamp
starting applications.
Frame
Prewired electrogalvanized heavy steel junction box listed for through
branch circuit wiring with 1/2˝ & 3/4˝ pryouts. Electrogalvanized plated
steel housing with adjustable spring steel roto clips allowing for a quick trim
installation.
Housing accomodates any ceilings with a max. thickness of 1 3/4˝
Trim Options
PFL - Polish Flange
FGSK - Flange Gasket
GR - Goof Ring*
* - specify I.D. and O.D. standard white finish
319
ARCHITECTURAL STAR LIGHTING, LLC