PROJECT INFORMATION PROJECT: TYPE TYPE: PROJECT CATALOG#: CATALOG# 8" Remodel Arch. Housing (Non-IC) w/ Reflector w/ Lens LVH8 SERIES - 8" ARCHITECTURAL CFL RECESSED LIGHTING 10 1/2" 7 7/8" 9" 13 3/4" 9" SPECIFICATION FEATURE: Ceiling cut-out: 8" Application: Application:Architectural-grade recessed downlight housing for medium to high ceilings for commercial installations. A variety of trims, compatible styles and finishes are available to achieve the proper décor and illumination. Housing Frame: 16 gauge galvanized plaster ring with powder coat finish, six friction clips secure trim to housing for ceiling up to 1". Pre-installed torsion remodeling clips for secure installation on existing ceiling. Mounting: Housing suitable for existing or new construction installations, supplied with 4 high tension remodeling clips, designed to secure the housing to an existing sheetrock ceiling up to 1" thick for fast and easy installation from below the ceiling line. Application: Architectural-grade recessed downlight reflector for high ceilings for commercial and architectural installations. Reflector designed for minimal glare from lamp without sacrificing lumen output. Regressed tempered glass lens allows for special control of light output. Protects lamp while reducing lamp image. Mounting: Pre-punched key holes allow mounting of socket cap assembly for housing, with vertically adjustable socket cap. Reflector held in place with 6 steel pressure springs mounted on housing frame. Ballast: Electronic Class P 60Hz Ballast with Inherent thermal protection. For Double Twin Tube (DTT) or Triple Twin Tube Lamps (TTT). Sound A rated. Micro-Processor controlled. Min. starting temperature -10ºC. Accessible from above or below the ceiling. Contact factory for detailed technical information on ballast specifications. Note: For dimming applications must use compatible dimmer switch. Consult specific ballast manufacturer for up-to-date compatibility list. Suitable for Damp and Wet Location Installations. Socket Cap: Extruded aluminum socket cap, 1 1/4" vertically adjustable socket arm with set screw which enables the use of multiple lamp types and repositioning to optimize lamp performance. Furnished with heat sink fins to vent lamp heat and extend lamp life. Accepts compatible reflector trims. Assembled in USA Warranty: Covered by a 3 Year Warranty to be free of defects in materials and craftsmanship. Label: UL Listed, cETL Listed Socket: Thermo-plastic socket UL Listed rated for high temperature and provides nickel plated contacts. Either accepts 2-Pin lamps for use with magnetic ballast or 4-Pin lamps with electronic ballast selection. Vertically adjustable galvanized steel plate enables lamp repositioning to optimize performance. Safety Labels: ETL/CETL listed for through-branch wiring (8) No.12 AWG 90°C and suitable for damp locations. NYC approved: Calendar #41937. 2016.6.15 Emergency Option: Emergency back-up operates one lamp for a minimum of 90 minutes at 750 Lumens in case of power outage. Unit is remotely mounted. It includes battery, charger, and test switch with indicator light. Consult Factory for 1300 Lumen Package. Label: cETL Listed Assembled in USA 7 1/8" 8" REMODEL ARCH. HOUSING LVH8R1 CFL 70W Max TTT, 26W DTT UD UE ADV-SM ADV-M7 ADV-M10 LUT-HL LUT-TW UE-347 E BALLAST :0-10V Dimming (120V/277V) :120V/277V Electronic :120V/277V Smart Mate :120V/277V Mark VII Dimming :120V Mark X Dimming* :120V/277V Lutron 3-Wire Dimming :120V Tu-wire Dimming :347V Electronic :120V Electronic OPTIONS Blank :None -EM :Emergency (Remote) -EMA :Emergency (Trim) -FS :Fuse Ordering example: LVH8R126-42ADV-M7/LR802WWF-CL-PC REFLECTOR / FLANGE FINISH LR802CWF :Clear Reflector/White Flange LR802SNF :Satin Haze Reflector/Satin Haze Flange LR802WWF :White Reflector/White Flange LR802SWF :Satin Reflector/ White Flange Blank -CF -CL-PC -FR LENS TYPE :Prismatic Lens :Center-FrostTM :Clear Polycarbonate Lens :Frosted ID#: 408_411 WATTAGE LVH8R113 :13W LVH8R118 :18W LVH8R126 :26W LVH8R126-42 :26W-42W** LVH8R132 :32W LVH8R142 :42W LVH8R157 :57W LVH8R170 :70W REFLECTOR W/ LENS LR802 CFL 42W TTT, 26W DTT 9" * **Multi-Watt Option Not Available for LUTRON Ballasts Not available for 13W option. A Tel: 323.904.0200 Product specifications subject to change without notice. File Located online www.liton.com/spec Insulation Contact: Non-IC rated housing must be kept 3” from insulation. www.liton.com D I V I S I O N L I G H T I N G O F G R O U P