G.H. RAISONI ACADEMY OF ENGINEERING & TECHNOLOGY
(Approved by AICTE, New Delhi, recognized by Govt. of Maharashtra & Affiliated of RashtrasantTukadojiMaharaj Nagpur University)
Shardha park, B- 37/39, MIDC, Off. Hingna- Wadi Link Road, Nagpur-440028, (INDIA)
Ph. +91-7104-237688 Fax: +91- 7104-236100
Email:ghraetnag@raisoni.net Web: www.ghraet.raisoni.net
Department of Mechanical Engineering
Details of Research Papers in Journals
Session 2011-2012
Sr.
Name of Faculty
No.
Title of Paper
Name of Journals /Volume No/Issue
No/Pg. No/ISBN/ISSN/I.P
1
Prof. Seema Rewatkar
Modeling and Analysis of Eight
Axis Articulated Robot Arm
International J.of Multidispl.Research &
Advcs. in Engg.(IJMRAE),ISSN 0975-7074,
Vol.3, No. 4(OCTOBER 2011) , pp.243-254
2
Dr. Achal S. Shahare
3
Mr. Sandeep
Chowriwar
4
Prof. Seema Rewatkar
Study of Nagpur Railway station
for consumption of PET water
bottles & Plastic Waste during
railway travel
Minimization of Dross
Formation During the
Continuous Galvanizing Process
in the Steel Industry
Torque at joints of eight Axis
Articulated Robot Arm
5
Dr. Achal S. Shahare
Reverse logistic Network design
for post consumption PET
drinking water bottles & Plastic
Waste at Nagpur Railway
Station
6
Dr. Achal S. Shahare
Application of Reverse logistic
Model in Indian Railway for
plastic waste collection and
distribution
7
Prof. Siraj Mohamdali
sheikh
Analysis of Universal Coupling
under Different Torque
Condition.
International Journal of Advances In
Engineering Research (IJAER), 2011, Vol.
No. 2, Issue No. VI, December, ISSN: 22315152.
International Journal of Emerging
Technology and Advanced Engineering, ISSN
2250-2459,Volume 2, Issue 1, January 2012,
www.ijetae.com
International J.of Multidispl.Research &
Advcs. in Engg.(IJMRAE),ISSN 0975-7074,
Vol.4 , No. 1(January 2012) , pp.145154,www.ascent-journals.com
International Journal of Mechanical
Engineering and Technology, ISSN 0976 –
6340 (Print), ISSN 0976 – 6359
(Online),Volume 3, Issue 1, January- April
(2012), pp. 40-45, Journal Impact Factor
(2011) - 1.2083 (Calculated by GISI)
www.jifactor.com.
International Journal of Mechanical
Engineering and Technology, ISSN 0976 –
6340 (Print), ISSN 0976 – 6359
(Online),Volume 3, Issue 1, January- April
(2012), pp. 33-39, Journal Impact Factor
(2011) -1.2083 (Calculated by GISI)
www.jifactor.com,
www.iaeme.com/ijmet.html
International Journal of Engineering Science
& Advanced Technology VOL-02 ISS-03
May-June 2012 ,Page No. 690-694,ISSN:
2250–3676
G.H. RAISONI ACADEMY OF ENGINEERING & TECHNOLOGY
(Approved by AICTE, New Delhi, recognized by Govt. of Maharashtra & Affiliated of RashtrasantTukadojiMaharaj Nagpur University)
Shardha park, B- 37/39, MIDC, Off. Hingna- Wadi Link Road, Nagpur-440028, (INDIA)
Ph. +91-7104-237688 Fax: +91- 7104-236100
Email:ghraetnag@raisoni.net Web: www.ghraet.raisoni.net
Department of Mechanical Engineering
Details of Research Papers in Journals
Session 2012-2013
Sr.
Name of Faculty
No.
Title of Paper
1
Mr. Ashvin Deogade
Investigation of Effect of Non
Central Circular Holes on
Stresses in Rotating Disc
2
Mr. Ashvin Deogade
Investigation of effect of non
central circular holes on stresses
in rotating disc
3
Mr.Nikhil Jogi
4
Mr. Kapil A Pakhare
Heat Transfer Analysis of
Corrugated Plate Heat Exchanger
of Different Plate Geometry: A
Review
Failure Analysis Of Taper Die
Of Biomass Briquetting
Machine: A Review
5
Dr. Achal S. Shahare
6
Prof. Seema Rewatkar
7
Prof. Shrikant Thote
Effect of the Process Parameters
on the Surface Roughness during
Magnetic Abrasive Finishing
Process on FERROMAGNETIC
STAINLESS Steel Workpieces
8
Prof. Siraj Mohamdali
sheikh
Rocker Arm:A Review
Reverse logistic model design:
Nagpur Railway Station a case
study
Methodology of Special Purpose
Spot Facing Machine
Name of Journals /Volume No/Issue
No/Pg. No/ISBN/ISSN/I.P
International Journal of Engineering
Research and Application, Vol.2, Issue 5,
Sep. – Oct. 2012 : ISSN: 2248-9622,pp.561565
International journal of engineering research
and application vol.2 issue 5 Sep. – Oct.
2012 : ISSN: 2248-9622,pp.561-565
International Journal of Emerging
Technology and Advanced Engineering,
ISSN 2250-2459, Volume 2, Issue 10, Oct
2012, pp. 110-115, www.ijetae.com
International Journal of Engineering and
Social Science Volume 2, Issue 10 (October
2012) ISSN: 2249- 9482 www.gjmr.org, pp
39-50
Journal of Engineering Research and
Studies , E-ISSN 0976-7916,JERS/Vol. IV/
Issue I/January-March, 2013/01-05
International Journal Of Computational
Engineering Research (ijceronline.com)
Vol. 3 Issue. 3,Issn :2250-3005 (Online),
March 2013, www.ijceronline.com,pp.98102
International Journal of Mechanical
Engineering and Technology (IJMET) ISSN
0976-6340(PRINT) ISSN 09766359(ONLINE), Volume 4 , Issue 2 , April
(2013), PP.310-319
International Jouranl of Innovative Research
in Science, Engineering and Technology
(IJIRSET) Vol.02,Issue 4,April 2013,ISSN:
2319-8753
G.H. RAISONI ACADEMY OF ENGINEERING & TECHNOLOGY
(Approved by AICTE, New Delhi, recognized by Govt. of Maharashtra & Affiliated of RashtrasantTukadojiMaharaj Nagpur University)
Shardha park, B- 37/39, MIDC, Off. Hingna- Wadi Link Road, Nagpur-440028, (INDIA)
Ph. +91-7104-237688 Fax: +91- 7104-236100
Email:ghraetnag@raisoni.net Web: www.ghraet.raisoni.net
9
Mr. A. B. Deoghare
10
Rajendra P. Bansod
11
Mr. A. B. Deoghare
12
Mr.Kishorkumar
K.Khandare
Surface Roughness Analysis Of
Ss202
Stainless Steel By
Electrochemical
Polishing
Surface Roughness Analysis Of
Ss202
Stainless Steel By
Electrochemical
Polishing
Biomechanical Approach for
Force Analysis of Human Body
Fem Analysis For Stress
Distribution Of Root Analogue
Zirconia Dental Implant: A
Review
International Journal of Innovative Research
in Science, Engineering and Technology
Vol.2, Issue 5,May 2013, ISSN: 2319-8753,
pp 1425-1432,www.ijirset.com
International Journal of Innovative Research
in Science, Engineering and Technology
Vol.2, Issue 5,May 2013, ISSN: 2319-8753,
pp 1425-1432,www.ijirset.com
International Journal of Innovative Research
in Science, Engineering and Technology
Vol.2, Issue 5,May 2013, ISSN: 2319-8753,
pp 1528-1531,www.ijirset.com
International Journal of Innovative Research
in Science, Engineering and Technology
Vol.2, Issue 6, June 2013, ISSN: 23198753, www.ijirset.com, pp 2030-2034
G.H. RAISONI ACADEMY OF ENGINEERING & TECHNOLOGY
(Approved by AICTE, New Delhi, recognized by Govt. of Maharashtra & Affiliated of RashtrasantTukadojiMaharaj Nagpur University)
Shardha park, B- 37/39, MIDC, Off. Hingna- Wadi Link Road, Nagpur-440028, (INDIA)
Ph. +91-7104-237688 Fax: +91- 7104-236100
Email:ghraetnag@raisoni.net Web: www.ghraet.raisoni.net
Department of Mechanical Engineering
Details of Research Papers in Journals
Session 2013-2014
Sr.
Name of Faculty
No.
Title of Paper
Name of Journals /Volume No/Issue
No/Pg. No/ISBN/ISSN/I.P
1
Mr. Sandeep
Chowriwar
Simulation of queuing analysis
in hospital
International journal of mechanical
engineering and robotic research; Vol. 2 Issue
3; July 2013 @ IJMERR; ISSN 2278-0149,
pp. 122-128
International Journal of Mechanical
Engineering & Robotic Research 2013,ISSN
2278 – 0149 www.ijmerr.com Vol. 2, No. 3,
July 2013
International Journal of Mechanical
Engineering and Robotic Research; Vol. 2
Issue 3; July 2013 @ IJMERR; ISSN 22780149, pp. 122-128
International Journal of Innovative Research
in Science,Engineering & Technology, ISSN:
2319-8753,Vol. 2, Issue 8, August 2013
2
Prof. Siraj Mohamdali
sheikh
Design and Analysis of Rocker
Arm
3
Mr. Sandeep
Chowriwar
Simulation of Queuing Analysis
in Hospital
4
Prof. Shrikant Thote
CAD & CAE in Bio-Medical
Field
5
,Mr. Kapil Pakhare
Algae fuel technology concept of International journal of applied engineering
revolutionary future
research and development ; ISSN: 2250-1584,
Vol.3; issue 3; pp 15-28
6
Mr. Kapil A Pakhare
CAD & CAE in Bio-Medical
Field
International journal of innovative research in
science, Engineering &Technology Vol. 2,
Issue 8, August 2013; ISSN: 2319-8753
7
Prof. Shrikant Thote
Algae fuel technology concept
of revolutionary future
International Journal of Applied Engineering
Research & Development (IJAERD) ISSN:
2250-1584; ISSN (Online) : 2278 – 9383;
Vol.3; issue 3; August 2013, pp. 15-28
8
Prof. Seema Rewatkar
Design &Development of Spot
Facing Machine for Industrial
Valves
9
Prof. Seema Rewatkar
Static Analysis of Eight Degrees
of Freedom Articulated Robot
Armunder Varying Load
Conditions
International Journal of Computer
Technology and Electronics Engineering
(IJCTEE),Volume 3 , Issue 5, October
2013,ISSN 2249-6343
International Journal of Research in
Aeronautical and Mechanical Engineering
,Vol.1 ,Issue.7,
November 2013, pp. 236-244
G.H. RAISONI ACADEMY OF ENGINEERING & TECHNOLOGY
(Approved by AICTE, New Delhi, recognized by Govt. of Maharashtra & Affiliated of RashtrasantTukadojiMaharaj Nagpur University)
Shardha park, B- 37/39, MIDC, Off. Hingna- Wadi Link Road, Nagpur-440028, (INDIA)
Ph. +91-7104-237688 Fax: +91- 7104-236100
Email:ghraetnag@raisoni.net Web: www.ghraet.raisoni.net
10
Prof. Seema Rewatkar
Critical Success Factors For
Steel Casting Industries In
Vidharbha Region India
International Journal Of Research In
Aeronautical And Mechanical Engineering ,
vol.1, Issue .7 ,pp.217-227, November 2013.
11
Mr. Shailesh Khekale
Bomb Detection and Defusion in
Planes by Application Of
Robotics
12
Pranav G. Charkha
Supply chain performance
measurement system: an
overview
International Journal of Application or
Innovation in Engineering & Management
(IJAIEM), ISSN 2319 4847,editor@ijaiem.org,
editorijaiem@gmail.com
International Journal of Business Performance
and Supply Chain Modelling, Vol. 6, No. 1,
2014, pp 40-60
13
Ms. Darshana S.
Gaikwad
Study of Combustion Modeling
In CI Engine with Biodiesel as
an Alternative Fuel: A Review
14
Ms. Jaya bondade
Fault Diagnosis of Rotating
Machinery based on Wavelet
Packet Transform- A Review
15
Prof. Prashant N.
Awachat
Static and Dynamic Analysis for
Stress Calculations on Crank Pin
16
Prof. Prashant N.
Awachat
Heat Transfer Analysis of
International Journal of Engineering Research
Corrugated Plate Heat Exchanger & Technology (IJERT) ISSN: 2278-0181
over Coil Type Heat Exchanger: Vol. 3 Issue 3, March – 2014
A Review
17
Dr. Achal S. Shahare
Need To Develop Robot For
Electronics Warfare- A Review
18
Ms. Namrata Phate
Three- Dimensional Finite
Element Analysis of Human
Tibia Bone
19
Ms. Jaya bondade
Fault Diagnosis Of Rotating
Machinery Using FEM Analysis
20
Dr. Achal S. Shahare
Development of Low Cost
Multipurpose System for Green
House
International Journal Of Engineering And
Science (IJES) ,Volume 3 Issue 1 ,Pages 2529 ,2014 ISSN(e): 2319 – 1813 ISSN(p):2319
– 1805.
International Journal of Latest Trends in
Engineering and Technology (IJLTET), Vol.
3 Issue 3 January 2014, ISSN: 2278-621X,
pp313-317
International Journal of Research in Advent
Technology, Vol.2, No.2, February 2014 ,EISSN: 2321-9637 , pp 1-5
International Journal of Mechanical
Engineering and Robotic Research ISSN:
2278 –0149 www.ijmer.com Vol. 3, No. 2,
April 2014
International Journal of Scientific Research
Engineering & Technology (IJSRET), ISSN
2278 – 0882. Volume 3 Issue 1, April 2014
International Journal Of Pure And Applied
Research In Engineering And Technology,
Volume 2, Issue 9,ISSN: 2319-507X , Impact
Factor: 0.621, pp.123-130, www.ijpret.com
IORD Journal of Science and
Technology,Volume I,Issue IV,May-June
2014, 59-64,www.iord.in
G.H. RAISONI ACADEMY OF ENGINEERING & TECHNOLOGY
(Approved by AICTE, New Delhi, recognized by Govt. of Maharashtra & Affiliated of RashtrasantTukadojiMaharaj Nagpur University)
Shardha park, B- 37/39, MIDC, Off. Hingna- Wadi Link Road, Nagpur-440028, (INDIA)
Ph. +91-7104-237688 Fax: +91- 7104-236100
Email:ghraetnag@raisoni.net Web: www.ghraet.raisoni.net
Department of Mechanical Engineering
Details of Research Papers in Journals
Session 2014-2015
Sr.
Name of Faculty
No.
Title of Paper
1
Ms. Jaya bondade
Fault Diagnosis Of Rotating
Machinery
Based On Wavelet Packet
Transform
Design Consideration of
Groundnut Sheller Machine
2
Mr. Ashish Raghatate
3
Mr. Nilesh C.
Kanojiya
4
Mr. Ashish W. Bhagat
5
Prof. Seema Rewatkar
Design Modelling and Analysis
of Two Stage FLUX Dryer
6
Prof. Manish Morolia
7
Ms. Darshana S.
Gaikwad
8
Mr. Ashish Raghatate
Energy Conservation of Boiler
Feed Pump by Differential
Pressure Auto SCOOP Control
Method
Experimental validation of
combustion with CFD modeling
in single cylinder four stroke CI
engine fueled with biodiesel
Design Consideration of
Groundnut Sheller Machine
9
Ms. Darshana S.
Gaikwad
Heat transfer enhancement in
heat exchanger with inserts : A
Review
Madhuca Indica and Turmeric as
fuel in CI Engine: A Review
Performance Analysis of Single
Cylinder Four Stroke Ci Engine
FueledWith Diesel, Biodiesel
and Biodiesel Blends
Name of Journals /Volume No/Issue
No/Pg. No/ISBN/ISSN/I.P
International Journal of Research in
Engineering and Applied Sciences, , Vol. 02,
Issue 02, July 2014,ISSN (Print): 2249-9210 |
ISSN (Online): 2348-1862, pp 85-89
International Journal for Innovative Research in
Science & Technology ,Volume 1 , Issue 4 ,
September 2014
ISSN(online): 2349-6010, pp.41-46
International Journal Of Engineering research
and technology (ISSN: 2278-0181), Vol.3,
Issue 10, October 2014, pp.494-500
International Journal of Advance Research In
Science And Engineering, IJARSE, Vol. No.3,
Issue No.10, October, 2014,ISSN- 2319-8354,
pp.87-94.
VSRD International Journal of Mechanical,
Civil, Automobile and Production Engineering,
Vol. IV Issue XI November 2014,e-ISSN :
2249-8303, p-ISSN : 2319-2208 © VSRD
International Journals :
www.vsrdjournals.com,pp. 201&202
International Multidisciplinary Reasearch
journal, ISSN No : 2230-7850,Vol 4 Issue 10
Nov 2014,www.isrj.org
Journal of Multidisciplinary Engineering
Science and Technology (JMEST),Vol. 1 Issue
4,Pages 53-58, ISSN: 3159-0040, November –
2014.
IJIRST –International Journal for Innovative
Research in Science & Technology| Volume 1 |
Issue 7 | December 2014, ISSN(Online): 23496010
Journal of Applied Engineering (JOAE),Vol. 2
Issue 12,Pages 196-201, December-2014.
G.H. RAISONI ACADEMY OF ENGINEERING & TECHNOLOGY
(Approved by AICTE, New Delhi, recognized by Govt. of Maharashtra & Affiliated of RashtrasantTukadojiMaharaj Nagpur University)
Shardha park, B- 37/39, MIDC, Off. Hingna- Wadi Link Road, Nagpur-440028, (INDIA)
Ph. +91-7104-237688 Fax: +91- 7104-236100
Email:ghraetnag@raisoni.net Web: www.ghraet.raisoni.net
10
Mr. Kushal Sonawane
Review on Heat Transfer
Enhancement Using V Shaped
Ribs
11
Ms. Ashwini Kapse
12
Mr. Anil Sahu
Mathematical Modeling and
Performance Evaluation of
Feeder for Ginning Machine
using Field Data Based Model
Design, Modeling & Analysis of
Shaft of two Furrow Reversible
Plough
13
Mr. Nilesh Balki
14
Mr. Anil Sahu
15
International Journal of Applied Engineering
Research
ISSN 0973-4562 Volume 10, Number 5 (2015)
pp. 13555-13570, www.ripublication.com
International Journal for Scientific Research &
Development, Vol. 3, Issue 07, 2015 , ISSN
(online): 2321-0613,pp.294-296
International Journal for Scientific Research &
Development, Vol 3, Issue 10,2015, ISSN
(online ): 2321-0613,pp.201-203
Investigation of Temperature and
Heat Transferduring Machining :
Review
Modeling and Analysis of
Hammer of Impact Testing
Machine : A Review
International Journal for Scientific Research &
Development, Vol. 3, Issue 02, 2015 , ISSN
(online): 2321-0613,pp.2283-2286
International Journal of Mechanical
Engineering & Robotics Research,vol 4, no. 1,
2015,ISSN 2278-0149,PP.350-354
Prof. Manish Morolia
Optimization of Bed Material
Consumption in a CFBC Boiler
16
Mr. Sumit N.
Karanjekar
Failure Analysis of Hydraulic
Torque Wrench (Drive shaft)-A
Review
International Journal of Engineering Research,
ISSN:2319-6890)(online),2347-5013(print)
Volume No.4, Issue No.1, pp : 27 - 32 01 Jan.
2015
International Journal for scientific research and
development ,volume 2,Issue 11 ,Feb
2015,ISSN (online): 2321-0613
17
Dr. Achal S. Shahare
Design And Analysis For
Regenerating The Energy From
Building Lift
International Journal of Advanced Technology
in Engineering and Science www.ijates.com,
Volume No.03, Special Issue No. 02, February
2015 ISSN (online): 2348 – 7550
18
Ms. Ashwini Kapse
Optimization and Performance
Evaluation for Feeder for
Ginning Machine : A Review
19
Dr. Achal S. Shahare
A Review Paper on Bull Drawn
Multipurpose Fertilizer Drill
Device
International Journal of Engineering Research
& Technology (IJERT)
ISSN: 2278-0181,Vol. 4, Issue 02, February2015
International Journal for Scientific Research &
Development (IJSRD) ,volume 2,Issue 12 on
February 2015, ISSN (online): 2321-0613
20
Nitin H. Wankhede
Design of Manually Operated
Portable Paper Recycling
Machine
International Journal on Recent and Innovation
Trends in Computing and Communication
ISSN:2321-8169, Volume:3, Issue:2, February
2015, pp 050–054, www.ijritcc.org
G.H. RAISONI ACADEMY OF ENGINEERING & TECHNOLOGY
(Approved by AICTE, New Delhi, recognized by Govt. of Maharashtra & Affiliated of RashtrasantTukadojiMaharaj Nagpur University)
Shardha park, B- 37/39, MIDC, Off. Hingna- Wadi Link Road, Nagpur-440028, (INDIA)
Ph. +91-7104-237688 Fax: +91- 7104-236100
Email:ghraetnag@raisoni.net Web: www.ghraet.raisoni.net
21
Saurabh R. Rathod
Design of Manually Operated
Portable Paper Recycling
Machine
International Journal on Recent and Innovation
Trends in Computing and Communication
ISSN:2321-8169, Volume:3, Issue:2, February
2015, pp 050–054, www.ijritcc.org
22
Dr. Achal S. Shahare
Statistical Analysis For
Regenerating The Energy From
Building Lift
23
Mr. Gagandeep Singh
Bhuye
Overview of performance and
vibration analysis of CI engine
fuelled with emulsified biodiesel
International Journal of Science, Technology &
Management www.ijstm.com Volume No 04,
Special Issue No. 01, March 2015 ISSN
(online): 2394-1537
International Journal of Advanced Engineering
& Global Technology, Vol-03, Issue-03, March
2015,ISSN No: 2309-4893,pp.381-385
24
Mr. Suraj C. Thombre
Assessment of residual life of
engineering component
25
Mr. Sumit N.
Karanjekar
Drive Adaptor Failure Analysis
of Hydraulic Torque wrench
Tool : A Review
26
Prof. Prashant N.
Awachat
FEM Analysis of Rebar Bending
Machine
International Journal of Innovative Research in
Advanced Engineering (IJIRAE) ISSN: 23492163 Issue 4, Volume 2 (April 2015), pp.12-15
27
Prof. Prashant N.
Awachat
Design and Analysis of Re-Bar
Bending Machine
International Journal of Innovative Research in
Advanced Engineering (IJIRAE) ISSN: 23492163 Issue 4, Volume 2 (April 2015)
28
Ms. Manisha Fande
International Journal Of Engineering Research
& Technology (IJERT), ISSN: 2278-0181,Vol.
4, Issue 05, May-2015,pp.1109-1112.
29
Ms. Manisha Fande
Experimental Investigation and
Performance Evaluation of a
Three in One Vapour
Compression System Using
Refrigerant R134a
Feasibility Investigations and
Performance Analysis of Non
Concentrated Solar Photovoltaic
Thermal System for Nagpur
30
Dr. Achal S. Shahare
Design, Analysis and Fabrication
of Driving Wheel to be used in
Disc Underground Conveyor
System
International Journal for Research in Applied
Science & Engineering Technology, Volume 3
Issue V, May 2015
IC Value: 13.98 ISSN: 2321-9653,Volume 3
Issue V, May 2015
IC Value: 13.98 ISSN: 2321-9653
Journal of Emerging Technologies and
Innovative Research (international open assess
journal) ISSN:2349-5162 vol 2, Issue3, March
2015,pp. 723-727
International Journal for scientific research and
development ,volume 3,Issue 2 , April
2015,ISSN (online): 2321-0613
International Journal of Engineering Research
& Technology (IJERT), ISSN : 2278-0181,
Vol. 4, Issue 5,May -2015,pp.1051-1055
G.H. RAISONI ACADEMY OF ENGINEERING & TECHNOLOGY
(Approved by AICTE, New Delhi, recognized by Govt. of Maharashtra & Affiliated of RashtrasantTukadojiMaharaj Nagpur University)
Shardha park, B- 37/39, MIDC, Off. Hingna- Wadi Link Road, Nagpur-440028, (INDIA)
Ph. +91-7104-237688 Fax: +91- 7104-236100
Email:ghraetnag@raisoni.net Web: www.ghraet.raisoni.net
Department of Mechanical Engineering
Details of Research Papers in Journals
Session 2015-2016
Sr.
Name of Faculty
No.
Title of Paper
Energy Conservation of Boiler
Feed Pump by Differential
Pressure Auto Scoop Control
Method (Audit & Result
Analysis)
Reducing Assembly Time and
Rework of The Wheel Chair
Name of Journals /Volume No/Issue
No/Pg. No/ISBN/ISSN/I.P
1
Prof. Manish Morolia
International Journal of Current Engineering
and Technology, E-ISSN 2277 – 4106, P-ISSN
2347 – 5161,Vol.5, No.3 (June 2015),pp 16031611
2
Mr. Manish P.Nasre
3
Mr. Ashish Mokashi
A Review on Enhancement of
heat transfer in Heat Exchanger
with grooves
International Journal of Analytical
Experimental and Finite Element Analysis
(IJAEFEA) Volume 2, Issue 2, June, 2015 eISSN 2394 -5141,p-ISSN: 2394-5133, pp 5559
International Journal of Advanced Engineering
and Global Technology, ISSN No: 2309-4893,
Vol-03, Issue-06, June 2015
4
Mr. Nilesh Balki
Experimental Investigation of
Convective Heat Transfer
During Turning for Different
Machining Conditions
International Journal for Science and Advance
Research in Technology (IJSART) , volume 1,
Issue 6 ,JUNE 2015,ISSN [ONLINE]: 23951052, pp.191-196
5
Mr. Pankaj Shende
Analysis and Optimization of
Torque Arm Bracket
International Journal of Software & Hardware
Research in Engineering,ISSN-2347-4890
,Volume 3, Issue 9 September, 2015, pp.40-44
6
Pranav G. Charkha
Identification of Performance
Measures for Textile Supply
Chain: Case of Small &
Medium Size Enterprise
7
Mr. Shailesh Khekale
Role of Waiting Line Model in
Reducing the Patients Waiting
time in the Emergency
Department
International Journal of Supply Chain
Management
IJSCM, ISSN: 2050-7399 (Online), 2051-3771
(Print), Vol. 4, No. 3, September 2015, pp 5058
Journal of Medical Science and Cleanical
Research,
ISSN (e)-2347-176x ISSN (p) 2455-0450,
Impact Factor 3.79
Index Copernicus Value: 5.88
8
Mr. Anil Sahu
Design, Modification and Analysis
of Concrete Mixer Machine
International Journal on Recent and Innovation
Trends in Computing & Communication,Vol 3,
Issue 12,ISSN:2321-8169, PP.6613-6616
G.H. RAISONI ACADEMY OF ENGINEERING & TECHNOLOGY
(Approved by AICTE, New Delhi, recognized by Govt. of Maharashtra & Affiliated of RashtrasantTukadojiMaharaj Nagpur University)
Shardha park, B- 37/39, MIDC, Off. Hingna- Wadi Link Road, Nagpur-440028, (INDIA)
Ph. +91-7104-237688 Fax: +91- 7104-236100
Email:ghraetnag@raisoni.net Web: www.ghraet.raisoni.net
9
Dr. Achal S. Shahare
Design And Development Of
Robot For Electronics Warfare
10
Dr. Achal S. Shahare
Fabrication And Experimental
Analysis of Padel Powered
Battery Operated Bicycle
11
Ms. Niru N
Khobragade
12
Mr. Nilesh Kanojiya
International Journal of Scientific Research
and Management Studies (IJSRMS) ISSN:
2349-3371 Volume 1 Issue 5, pg: 177-182
International Journal of Research In Science &
Engineering, Volume: 2, Issue: 4,e-ISSN:
2394-8299
p-ISSN: 2394-8280,
www.ijrise.org|editor@ijrise.org [52-58]
A Review On Performance
International Journal for engineering
Evaluation of Evaporator Cooler application and Technology, ISSN 2321-8134,
During Summer In Vidharbha
MANTHAN-15
Region
Review on Enhancement of heat International Journal
transfer in heat exchanger with
inserts and nanofluid