ASMT-QYBC-Nxxxx
Super 0.5W Warm White Power PLCC-4
Surface Mount LED Indicator
Data Sheet
Description
Features
The Super 0.5W Warm White Power PLCC-4 SMT LED is
Warm white mid-Power PLCC-4 SMT LEDs using InGaN
chip technology. The package can be driven at high
current due to its superior package design. The product
is able to dissipate the heat more efficiently compared to
the Power PLCC-4 SMT LEDs. These LEDs produce higher
light output with better flux performance compared to
the Power PLCC-4 SMT LED.
x Industry Standard PLCC 4 platform (3.2x2.8x1.9mm)
The Super 0.5W Warm White Power PLCC-4 SMT LEDs are
designed for higher reliability, better performance, and
operate under a wide range of environmental conditions.
The performance characteristics of these new mid-power
LEDs make them uniquely suitable for use in harsh conditions such as in automotive applications, and in electronics signs and signals.
x Low Thermal Resistance 40°C/W
To facilitate easy pick and place assembly, the LEDs are
packed in EIA-compliant tape and reel. Every reel is
shipped in single intensity and color bin, to provide close
uniformity.
x High reliability package with enhanced silicone resin
encapsulation
x High brightness with optimum flux performance using
InGaN chip technologies
x Available in Warm White
x Available in 8mm carrier tape & 7 inch reel
x Wide viewing angle at 120 degree
x JEDEC MSL 2
Applications
1. Interior automotive
a. Instrument panel backlighting
b. Central console backlighting
c. Navigation and audio system backlighting
d. Dome/Map lighting
e. Push button backlighting
f. Puddle lamp
g. Glove compartment illumination
2. Exterior automotive
a. Number plate illumination
3. Electronic signs and signals
a. Decorative lighting
4. Office automation, home appliances,
equipment
a. Panel/button backlighting
b. Display backlighting
CAUTION: ASMT-QWBC-Nxxxx LEDs are Class 2 ESD sensitive. Please observe appropriate precautions
during handling and processing. Refer to Avago Application Note AN-1142 for additional details.
industrial
Package Drawing
1.9 ± 0.2
2.2 ± 0.2
A
C
C
1.15 ± 0.2
0.97
0.56 (TYP.)
I 2.4
3.2 ± 0.2
3.6 ± 0.2
0.41 (TYP.)
A
0.6 ± 0.3
0.79 ± 0.3
2.8 ± 0.2
0.7
CATHODE
MARKING
Notes:
1. All Dimensions in millimeters.
2. Lead Polarity as shown in Figure 14.
3. Terminal Finish: Ag plating
4. Encapsulation material: Silicone resin
Figure 1. Package Drawing
Table 1. Device Selection Guide (TJ = 25°C)
Luminous Flux, )V[1] (lm)
Color
Part Number
Min. Flux
(lm)
Typ. Flux
(lm)
Max. Flux
(lm)
Test Current
(mA)
Dice Technology
Warm White
ASMT-QYBC-NGJ0E
19.5
24.0
43.0
150
InGaN
ASMT-QYBC-NHJ0E
25.5
31.0
43.0
150
InGaN
Notes:
1. )V is the total luminous flux output as measured with an integrating sphere at mono pulse conditions.
2. Tolerance = ±12%
Part Numbering System
ASMT- Q X1 B C – N X2 X3 X4 X5
Packaging Option
Color Bin Selection
Max. Flux Bin Selection
Min. Flux Bin Selection
Color
Y – Warm White
2
Table 2. Absolute Maximum Ratings (TA = 25°C)
Parameters
ASMT-QYBC-Nxxxx
DC Forward Current [1]
150 mA
Peak Forward Current [2]
300 mA
Power Dissipation
570 mW
Reverse Voltage, VR @ 10 μA
4
Junction Temperature
125°C
Operating Temperature
-40°C to +120°C
Storage Temperature
-40°C to +120°C
Notes:
1. Derate Linearly as shown in Figure 6.
2. Duty Factor = 10%, Frequency = 1kHz
Table 3. Optical Characteristics (TJ = 25°C)
Color
Dice
Technology
Part Number
Warm White ASMT-QYBC-Nxxxx
InGaN
Typical Chromaticity
Coordinates
Viewing
Angle 2T½[1]
(Degrees)
Luminous
Efficiency Ke
(lm/W)
Total Flux /
Luminous Intensity
)V (lm) / IV (cd)
x
y
Typ.
Typ.
Typ.
0.40
0.39
120
47
2.30
Notes:
1. T½ is the off-axis angle where the luminous intensity is ½ the peak intensity.
Table 4. Electrical Characteristics (TJ = 25°C)
Forward Voltage
VF (Volts) @ IF = 150 mA
Part Number
Typ.
Max.
Thermal
Resistance RTJ-P
(°C/W)
ASMT-QYBC-NxxxE
3.4
3.8
40
3
250
FORWARD CURRENT - mA
RELATIVE INTENSITY
300
1.0
0.9
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0.0
380
200
150
100
50
430
480
530 580 630
WAVELENGTH - nm
680
730
0
780
Figure 2. Relative Intensity Vs. Wavelength
1
2
FORWARD VOLTAGE - V
3
4
Figure 3. Forward Current Vs. Forward Voltage.
1.2
1.8
NORMALIZED LUMINOUS FLUX
(NORMALIZED AT 25°C)
1.6
RELATIVE LUMINOUS FLUX
(NORMALIZED AT 150 mA)
0
1.4
1.2
1.0
0.8
0.6
0.4
1.0
0.8
0.6
0.4
0.2
0.2
0.0
0
50
100
150
200
DC FORWARD CURRENT - mA
250
0.0
-50
300
Figure 4. Relative Flux vs. Forward Current
140
RTJA = 90°C/W
120
RTJP = 40°C/W
120
RTJA = 110°C/W
CURRENT - mA
CURRENT - mA
100
160
140
100
80
60
100
80
60
40
40
20
20
0
0
20
40
60
80
100
TEMPERATURE (°C)
120
140
Figure 6a. Maximum Forward Current Vs. Ambient Temperature. Derated
Based on TJMAX = 125°C, RTJ-A = 110°C/W & 90°C/W.
4
0
25
50
75
TJ - JUNCTION TEMPERATURE - °C
Figure 5. Relative Flux Vs. Temperature
160
0
-25
0
20
40
60
80
100
TEMPERATURE (°C)
120
140
Figure 6b. Maximum Forward Current Vs. Solder Point Temperature. Derated
Based on TJMAX = 125°C, RTJ-P = 40°C/W.
0.40
0.40
D=
0.05
0.10
0.25
0.50
1
0.20
0.10
t
D= p
T
0.00
1.00E-05
1.00E-03
1.00E-01
tp - Time - (S)
0.30
CURRENT - A
0.30
CURRENT - A
D=
0.20
0.00
1.00E-05
1.00E+01
1.00E-03
1.00E-01
tp - Time - (S)
1.00E+01
Figure 7b. Maximum Pulse Current Vs. Ambient Temperature. Derated Based
on TA = 85°C, RTJ-A = 110°C/W.
0.25
0.20
FORWARD VOLTAGE SHIFT - V
COORDINATE SHIFT
D=
0.05
0.10
0.25
0.50
1
IF
0.005
Cx
0.000
-0.005
Cy
-0.010
-0.015
-0.020
0.15
0.10
0.05
0.00
-0.05
-0.10
-0.15
-0.20
100
150
200
FORWARD CURRENT - mA
Figure 8. Chromaticity Shift Vs. Forward Current
0
50
250
300
-50
0
25
50
75
TJ - JUNCTION TEMPERATURE - °C
Figure 9. Forward Voltage Shift Vs. Temperature.
0.008
0.006
Cx
0.004
0.002
0.000
NORMALIZED INTENSITY
CHROMATICITY COORDINATE SHIFT
IF
T
T
0.010
Cy
-0.002
-0.004
-0.006
-0.008
-0.010
-50
0
25
50
75
TJ - JUNCTION TEMPERATURE - °C
Figure 10. Chromaticity Shift Vs. Temperature
5
tp
0.10
tp
Figure 7a. Maximum Pulse Current Vs. Ambient Temperature. Derated Based
on TA = 25°C, RTJ-A = 110°C/W.
-0.025
tp
T
-25
100
125
1.0
0.9
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0.0
-90
-25
-60
-30
0
30
60
ANGULAR DISPLACEMENT - DEGREES
Figure 11. Radiation Pattern
100
90
TEMPERATURE
10 - 30 SEC.
D
217°C
200°C
255 - 260°C
3°C/SEC. MAX.
6°C/SEC. MAX.
150°C
3°C/SEC. MAX.
100 SEC. MAX.
60 - 120 SEC.
TIME
(Acc. to J-STD-020C)
Note: For detail information on reflow soldering of Avago surface mount
LEDs, do refer to Avago Application Note AN 1060 Surface Mounting
SMT LED Indicator Components.
Note: Diameter "D" should be smaller than 2.2mm
Figure 13. Recommended Pb-free Reflow Soldering Profile
Figure 12. Recommended Pick and Place Nozzle Size
2.4
0.6
0.9 X 6
1.3 x 6
A
A
A
0.4
A
1.1
C
C
C
C
C
CATHODE
MARKING
0.3
SOLDER MASK
A
ANODE
C
CATHODE
Figure 14. Recommended Soldering Pad Pattern
6
4.6
C
CATHODE
MARKING
MINIMUM 55 mm2 OF CATHODE PAD
FOR IMPROVED HEAT DISSIPATION
TRAILER
200 mm MIN. FOR Ø180 REEL.
200 mm MIN. FOR Ø330 REEL.
COMPONENT
LEADER
480 mm MIN. FOR Ø180 REEL.
960 mm MIN. FOR Ø330 REEL.
C
A
USER FEED DIRECTION
Figure 15. Tape Leader and Trailer Dimensions
Ø1.5
+0.1
–0
4 ± 0.1
4 ± 0.1
2 ± 0.05
1.75 ± 0.1
2.29 ± 0.1
C
C
A
A
3.5 ± 0.05
8 +0.3
–0.1
3.05 ± 0.1
3.8 ± 0.1
+0.1
Ø1 –0
0.229 ± 0.01
8°
ALL DIMENSIONS IN mm.
Figure 16. Tape Dimensions
USER FEED DIRECTION
CATHODE SIDE
PRINTED LABEL
Figure 17. Reeling Orientation
7
Handling Precaution
The encapsulation material of the product is made of
silicone for better reliability of the product. As silicone is
a soft material, please do not press on the silicone or poke
a sharp object onto the silicone. These might damage the
product and cause premature failure. During assembly or
handling, the unit should be held on the body only. Please
refer to Avago Application Note AN 5288 for detail information.
Device Color (X1)
Y
Warm White
Flux Bin Select (X2X3)
Individual reel will contain parts from one bin only
X2
Min Flux Bin
X3
Max Flux Bin
Moisture Sensitivity
This product is qualified as Moisture Sensitive Level 2 per
Jedec J-STD-020. Precautions when handling this moisture
sensitive product is important to ensure the reliability of
the product. Do refer to Avago Application Note AN5305
Handling of Moisture Sensitive Surface Mount Devices for
details.
A. Storage before use
– Unopen moisture barrier bag (MBB) can be stored at
<40°C/90%RH for 12 months. If the actual shelf life
has exceeded 12 months and the HIC indicates that
baking is not required, then it is safe to reflow the
LEDs per the original MSL rating.
– It is not recommended to open the MBB prior to
assembly (e.g. for IQC).
B. Control after opening the MBB
Flux Bin Limits
Bin ID
Min. (lm)
Max. (lm)
B
5.50
7.00
C
7.00
9.00
D
9.00
11.50
E
11.50
15.00
F
15.00
19.50
G
19.50
25.50
H
25.50
33.00
J
33.00
43.00
K
43.00
56.00
L
56.00
73.00
Tolerance of each bin limit = ± 12%
– The humidity indicator card (HIC) shall be read
immediately upon opening of MBB.
– The LEDs must be kept at <30°C/60%RH at all time
and all high temperature related process including
soldering, curing or rework need to be completed
within 1 year.
C. Control for unfinished reel
– For any unuse LEDs, they need to be stored in sealed
MBB with desiccant or desiccator at <5%RH.
D. Control of assembly boards
– If the PCB soldered with the LEDs is to be subjected to
other high temperature processes, the PCB need to
be stored in sealed MBB with desiccant or desiccator
at <5%RH to ensure no LEDs have exceeded their
floor life of 1 year.
E. Baking is required if
– “60%” HIC indicator is NOT Green.
– The LEDs are exposed to condition of >30°C/60% RH
at any time.
– The LEDs floor life exceeded 1 year.
Recommended baking condition: 60±5°C for 20 hours.
8
Color Bin Select (X4)
Individual reel will contain parts from one sub bin only.
X4
0
Full Distribution
A
H, J and K only
B
H, J, K, L and M only
C
L and M only
D
L, M, N and P only
E
N and P only
F
N, P, Q and R only
G
Q and R only
Z
Special Color Bin
Color Bin Limits
Bin
ID
Sub Bin
ID
Limits (Chromaticity Coordinates)
H
H3
H4
H5
J
J3
J4
J5
K
K3
K4
K5
L
L3
L4
L5
M
M3
M4
M5
9
x
0.348
0.360
0.364
0.350
y
0.332
0.341
0.358
0.348
x
0.350
0.364
0.367
0.352
y
0.348
0.358
0.376
0.365
x
0.352
0.367
0.371
0.354
y
0.365
0.376
0.392
0.381
x
0.360
0.373
0.378
0.364
y
0.341
0.350
0.368
0.358
x
0.364
0.378
0.383
0.367
y
0.358
0.368
0.386
0.376
x
0.367
0.383
0.388
0.371
y
0.376
0.386
0.403
0.392
x
0.373
0.387
0.393
0.378
y
0.350
0.358
0.376
0.368
x
0.378
0.393
0.399
0.383
y
0.368
0.376
0.395
0.386
x
0.383
0.399
0.405
0.388
y
0.386
0.395
0.412
0.403
x
0.387
0.400
0.407
0.393
y
0.358
0.366
0.384
0.376
x
0.393
0.407
0.414
0.399
y
0.376
0.384
0.402
0.395
x
0.399
0.414
0.421
0.405
y
0.395
0.402
0.420
0.412
x
0.400
0.413
0.421
0.407
y
0.366
0.372
0.390
0.384
x
0.407
0.421
0.429
0.414
y
0.384
0.390
0.409
0.402
x
0.414
0.429
0.436
0.421
y
0.402
0.409
0.426
0.420
Bin
ID
Sub Bin
ID
Limits (Chromaticity Coordinates)
N
N3
N4
N5
P
P3
P4
P5
Q
Q3
Q4
Q5
R
R3
R4
R5
x
0.413
0.425
0.434
0.421
y
0.372
0.378
0.396
0.390
x
0.421
0.434
0.443
0.429
y
0.390
0.396
0.414
0.409
x
0.429
0.443
0.451
0.436
y
0.409
0.414
0.430
0.426
x
0.425
0.438
0.447
0.434
y
0.378
0.382
0.400
0.396
x
0.434
0.447
0.456
0.443
y
0.396
0.400
0.417
0.414
x
0.443
0.456
0.465
0.451
y
0.414
0.417
0.434
0.430
x
0.438
0.450
0.460
0.447
y
0.382
0.386
0.403
0.400
x
0.447
0.460
0.470
0.456
y
0.400
0.403
0.420
0.417
x
0.456
0.470
0.479
0.465
y
0.417
0.420
0.436
0.434
x
0.450
0.462
0.472
0.460
y
0.386
0.389
0.405
0.403
x
0.460
0.472
0.482
0.470
y
0.403
0.405
0.422
0.420
x
0.470
0.482
0.491
0.479
y
0.420
0.422
0.437
0.436
Tolerance of each bin limit = ±0.02.
0.45
0.43
R5
Q5
P5
N5
M5
0.41
P4
N4
K5
Y-COORDINATE
M4
0.39
R4
Q4
L5
L4
J5
R3
Q3
P3
N3
K4
H5
M3
J4
0.37
2800K - 2500K
L3
3150K - 2800K
H4
K3
3650K - 3150K
J3
0.35
H3
4800K - 3650K
0.33
0.31
0.34
0.36
0.38
0.40
0.42
0.44
0.46
0.48
0.50
X-COORDINATE
VF Bin Limits
Packaging Option (X5)
Bin ID
Min.
Max.
Option
Test Current
Package Type
Reel Size
S4
2.90
3.20
E
150mA
Top Mount
7 Inch
S5
3.20
3.50
S6
3.50
3.80
Tolerance of each bin limit = ±0.1V
For product information and a complete list of distributors, please go to our web site:
www.avagotech.com
Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies in the United States and other countries.
Data subject to change. Copyright © 2005-2010 Avago Technologies. All rights reserved.
AV02-1745EN - April 6, 2010