RECESSED ARCHITECTURAL
Columbia Lighting Energy Solutions Initiative
e•poc
Page 5
EnergyMax® Stratus
Page 8
createchange is our commitment to meeting the challenges and opportunities posed by rising
energy costs, environmental concerns, energy legislation, LEED certification, utility rebates, and
EPAct tax deductions. It is a product philosophy dedicated to development of innovative, high
performance luminaires.
To receive the createchange® trademark, a product must meet three criteria.
When compared to fixtures traditionally used in lighting applications, createchange® luminaires must:
1.Save at least 20% in energy
2.Maintain lighting quality
3.Maintain light levels
We achieve these goals through innovative design that optimizes performance through our choice of
lamp, ballast, reflector, refractor, and control technologies, to create ultra-high efficiency luminaires
that deliver proper light levels and distribution at the lowest possible wattage.
EnergyMax® Intersect
Page 13
Zero Plenum® Troffer
Page 14
EnergyMax® Parabolic
Page 19
Bi-Level Luminaire
Page 49
VersaBay
Page 59
XFSW
Page 82
XTS
Page 85
Morph
Page 93
Energy Benefits
Energy efficient lighting solutions can help cut lighting costs by up to 52% without sacrificing light
levels; even higher savings can be realized when combined with lighting controls.
• createchange® lighting solutions typically pay for themselves in under two years when installed in
new buildings.
• createchange® solutions costs are often recouped in one to three years following installation in a
remodel project.
• createchange® solutions, if used wherever possible, would lower the nation’s electrical demand by
over 10%, saving ratepayers nearly $17 billion annually.
Collateral Benefits
EPAct
createchange® energy solutions can help leverage federal tax deductions by up to $0.60 per square
foot when meeting guidelines established by the Energy Policy Act of 2005.
LEED
Reducing power demand is the largest single consideration when applying for LEED certification.
createchange® energy solutions help achieve that goal.
Utility Rebates
Many electrical utilities offer substantial rebates for energy-efficient lighting. createchange® energy
solutions typically qualify, in many cases completely defraying most or all of the cost of the fixture.
Environmental Benefits
The use of createchange® energy solutions contributes significantly to the reduction of greenhouse
gases. If just the estimated 50 million 400W metal halide high bays and 100 million 3-lamp
parabolics in use today were converted to their createchange® equivalents, we could save 43 million
metric tons of CO₂ emissions annually—an amount equal to 1.7% of all CO₂ caused by the generation
of electricity in the U.S. This equates to taking 7.8 million cars of the road. Replacing troffers and
other fixtures that use outdated technology could save far greater amounts.
A rapid transition to energy efficiency and renewable energy sources will combat global climate
change, protect human health, create new jobs, protect wildlife habitats, and ensure a secure,
affordable energy future.
For more createchange® information, visit www.columbialighting.com
4
EPC
e•poc® Full Distribution Luminaire
Features
Both T5 and T8 optical systems available
•
•
Full distribution provides controlled high
angle light for visual comfort
Exclusive T8 EnergyMax® tuned 1.04 ballast
factor ballast
•
Unique frameless optics system allows easy
access to lamps and electrical from below the
ceiling
•
Lens styles provide aesthetic alternatives
•
Low profile housing fits in tight plenum
spaces
•
UL listed 1598, cUL or CSA, Damp Location
Listed
•
Advanced optical design produces high
efficiencies
•
Step dimming options available for both T5
and T8 expand energy savings opportunities
2
•
Low W/ft ratio meets the most restrictive
lighting power density codes
•
Typically qualifies for EPAct tax deductions
RECESSED ARCHITECTURAL
•
Ordering Information
EPC
–
Model
EPC e•poc® Full
Distribution
Luminaire
–
No. of lamps
1 One
2 Two
Size
14 1' × 4'
22 2' × 2'
24 2' × 4'
Ceiling type
Shielding
G Grid
DL Delta Profile
SM Surface SH
Shield Profile
Mount
For hard
ceilings use
flange kit.
–
–
Air function
Blank Static
A Air Return
Side Slots
(N/A 1' × 4')
–
Voltage
U 120V-277V
347 347V2
Lamp type
Ballast
2', T5: 14 Watt
2', T8: 17 Watt
2', T5HO: 24 Watt
4', T5: 28 Watt
4', T8: 32, 30, 28
or 25 Watt
40TT Twin Tube Compact,
2G11 Base: 40 Watt
54 4', T5HO: 54 or 51
Watt
NOTE: See Technical Section for other ballast options.
E Electronic T8, 0.88 Ballast Factor, Instant Start
ED Electronic T8, T5, T5HO Dimming, Programmed Start`
ESD Electronic T8, 0.88 Ballast Factor, Step Dimming,
Programmed Start1
ELW Electronic T8, 0.77 Ballast Factor, Low Wattage,
Instant Start
EHL Electronic T8, 1.18 Ballast Factor, High Wattage,
Instant Start
E104 Electronic T8, 1.04 Ballast Factor, Instant Start4 (N/A
1-Lamp)
ESD104 Electronic T8, 1.04 Ballast Factor, Step Dimming,
Programmed Start1,4
EP104 Electronic T8, 1.04 Ballast Factor, Programmed Start4
EP Electronic T5, T5HO, 1.0 Ballast Factor or T8, 0.88
Ballast Factor, Programmed Start
EP95 Electronic T5, 0.95 Ballast Factor, Programmed Start
(N/A T5HO, 1-Lamp)
EP115 Electronic T5, 1.15 Ballast Factor, Programmed Start
(N/A T5HO, 1-Lamp)
ESD95 Electronic T5, 0.95 Ballast Factor, Step Dimming,
Programmed Start (N/A T5HO, 1-Lamp)
ESD115 Electronic T5, 1.15 Ballast Factor, Step Dimming,
Programmed Start (N/A T5HO, 1-Lamp)
ESD80 Electronic T5HO, 0.80 Ballast Factor, Step Dimming,
Programmed Start (2-lamp 54W only)
ETT Electronic Twin Tube, Instant Start (Specify voltage)
EPTT Electronic Twin Tube, Programmed Start
14
17
24
28
32
Accessories
(Order Separately)
FK14 1' × 4' Flange Kit
FK22 2' × 2' Flange Kit
FK24 2' × 4' Flange Kit
FKCR Flange Kit Row Adaptor
1
Not compatible with T8 25, 28, or 30 watt energy
savings lamps.
Where available.
3
Not recommended for use with step or full dimming.
4
For e•poc Plus, order "-PlusXX" lamps under "Options."
2
Product Availability
SIZE
NO. OF
LAMPS
LAMP TYPE
1' × 4'
1
28, 32, 54
1' × 4'
2
28, 54
2' × 2'
2
14, 17, 24, 40TT
2' × 4'
2
28, 32, 54
24"
EPC24
Options
C388
C488
C588
EL
EL5
GLR
GMF
NYC
NYCU
3-Wire Flex
4-Wire Flex
5-Wire Flex
Emergency Battery Pack, T8
Emergency Battery Pack, T5
Fast Blow Fuse
Slow Blow Fuse
NYC Compliant
NYC Compliant, Union Label
Lamps Installed
FO730
FO735
FO741
FO830
FO835
FO841
PLUS30
PLUS35
PLUS41
FOH830
FOH835
FOH841
F5830
F5835
F5841
F5H830
F5H835
F5H841
FTT830
FTT835
FTT841
30K 75CRI T8 Lamps Installed
35K 75CRI T8 Lamps Installed
41K 75CRI T8 Lamps Installed
30K 82CRI T8 Lamps Installed
35K 82CRI T8 Lamps Installed
41K 82CRI T8 Lamps Installed
30K 82CRI 28W T8 Lamps Installed3
35K 82CRI 28W T8 Lamps Installed3
41K 82CRI 28W T8 Lamps Installed3
30K High Lumen T8 Lamps Installed
35K High Lumen T8 Lamps Installed
41K High Lumen T8 Lamps Installed
30K 85CRI T5 or T5HO Lamps Installed
35K 85CRI T5 or T5HO Lamps Installed
41K 85CRI T5 or T5HO Lamps Installed
30K High Lumen T5 Lamps Installed
35K High Lumen T5 Lamps Installed
41K High Lumen T5 Lamps Installed
30K Twin Tube Lamps Installed
35K Twin Tube Lamps Installed
41K Twin Tube Lamps Installed
3⅞"
3⅜"
3⅜"
–
24"
EPC22
12"
EPC14
5
TRA
Transition™ High Efficiency Architectural Lensed
RECESSED ARCHITECTURAL
Features
•
Precision optical design produces high
efficiency in a high visual comfort,
architecturally styled lensed fixture
•
Balanced reflector and lens curves provide
architectural interest with low brightness and
low contrast
•
Optimized coating process and unique paint
formulation provide exceptional reflectivity in
a matte finish for a soft visual image
•
Completely recessed, provides a clean ceiling
with uniform illumination at mounting heights
as low as 8 feet
•
Available for use with T8, T5, or T5HO linear
fluorescent and twin tube lamps
•
Optional acrylic dust guard pivots to protect
lamp compartment against contaminants
especially for schools, medical facilities and
public spaces
•
UL listed 1598, cUL or CSA, Damp Location
Listed
Ordering Information
TRA
–
Model
TRA Transition™
High Efficiency
Architectural
Lensed
CLO
–
No. of Lamps in
Cross section
1 One
2 Two
3 Three
–
–
Ceiling type
G Grid Lay-in
SM Surface
Ballast
E Electronic T8, Instant
Options
EL
EL5
FO730
FO735
FO741
FO830
FO835
FO841
F5830
Start
ED Electronic Dimming T8
Mount
and T5
EP Electronic T5, T5HO, or
T8, Programmed Start
ETT Electronic Twin Tube,
Size
14 1' × 4'
22 2' × 2'
24 2' × 4'
Lamp type
14
17
24
28
32
2' T5; 14 Watt
2', T8: 17 Watt
2', T5HO: 24 Watt
4', T5; 28 Watt
4', T8: 32, 30, 28
or 25 Watt
40TT 2', Twin Tube
Compact, 2G11
Base: 40 Watt
54 4', T5HO, 54 Watt
Instant Start
Shielding
CLO Clear Linear
EPTT Electronic Twin Tube,
Prism
Acrylic with
Overlay
3E
3EP
ELW
3ELW
E104
Accessories
(Order Separately)
FK14 1' × 4' Flange Kit
FK22 2' × 2' Flange Kit
FK24 2' × 4' Flange Kit
ESD104
Programmed Start
3-Lamp Electronic T8,
Instant Start
3-Lamp Electronic T8,
Programmed Start
2-Lamp Electronic T8,
0.77 Ballast Factor, Low
Wattage, Instant Start
3-Lamp Electronic T8,
0.77 Ballast Factor, Low
Wattage, Instant Start
Electronic T8, 1.04
Ballast Factor, Instant
Start
Electronic T8, 1.04
Ballast Factor, Step
Dimming, Programmed
Start1
Voltage
U 120V-277V
347 347V
F5835
F5841
PLUS30
PLUS35
PLUS41
FTT830
FTT835
FTT841
C388
C488
DG
NYC
NYCU
1
Not compatible with T8 25, 28, or 30 watt energy savings lamps.
Not recommended for use with step or full dimming.
2
Emergency Battery Pack, T8
Emergency Battery Pack, T5
30K 75CRI T8 Lamps Installed
35K 75CRI T8 Lamps Installed
41K 75CRI T8 Lamps Installed
30K 82CRI T8 Lamps Installed
35K 82CRI T8 Lamps Installed
41K 82CRI T8 Lamps Installed
30K 85CRI T5 or T5HO Lamps
Installed
35K 85CRI T5 or T5HO Lamps
Installed
41K 85CRI T5 or T5HO Lamps
Installed
30K 82CRI 28W T8 Lamps
Installed2
35K 82CRI 28W T8 Lamps
Installed2
41K 82CRI 28W T8 Lamps
Installed2
30K 82CRI 40W TT Lamps
Installed
35K 82CRI 40W TT Lamps
Installed
41K 82CRI 40W TT Lamps
Installed
3-Wire Flex
4-Wire Flex
Dust Guard
NYC Compliant
NYC Compliant, Union Label
Product Availability
NO. OF LAMPS IN
CROSS SECTION
NO. OF LAMPS IN
FIXTURE
LAMP TYPE
HEIGHT
1' × 4'
1
1
2
3
1
2
2
3
28, 32, 54
40TT
28, 32, 54
28, 32, 54
5¾"
5¾"
5¾"
5¾"
2' × 2'
2
3
2
3
14, 17, 24, 40TT
14, 17, 24
4¾"
4¾"
2' × 4'
2
2
3
3
2
4
3
6
28, 32, 54
40TT
28, 32, 54
40TT
4¾"
4¾"
4¾"
4¾"
SIZE
51/2"
12"
TRA14
43/4"
6
24"
TRA22, TRA24
EMSE
®
EnergyMax Stratus™ Energy Saving
Architectural Recessed Indirect Luminaire
Features
Tuned system delivers more lumens than
conventional 2-lamp recessed indirect
fixtures
•
•
•
•
Uses tuned 1.04 ballast factor NEMA
Premium fixed and step dim ballasts
Completely recessed, provides a clean
ceiling while providing soft, uniform
indirect illumination in rooms with
ceilings as low as 8 feet
•
Precision optical system produces an
efficient luminaire without sacrificing
high visual comfort
Light basket and reflector are powder
coated white and painted after
fabrication
•
Ease of installation and maintenance
•
UL listed 1598, cUL. Damp Location
standard
Plastic end caps support the light basket
and act as a light seal
RECESSED ARCHITECTURAL
•
Ordering Information
EMSE
2
–
–
No. of lamps
2 Two
Model
EMSE EnergyMax®
Stratus™
E-Series1
Ceiling type
G Grid
SM Surface Mount
MPO
–
SHIELDING
MPO Metal Perf
w/Overlay
U
Voltage
U 120V-277V
For hard ceilings use
flange kit.
Size
22 2' × 2'
24 2' × 4'
Lamp type
17 2', T8: 17 Watt
32 4', T8: 32, 30, 28
or 25 Watt
Ballast
E104 Electronic T8, 1.04 Ballast Factor,
Instant Start1 (N/A 1-Lamp)2
ESD104 Electronic T8, 1.04 Ballast Factor,
Step Dimming, Programmed Start2
Accessories
(Order Separately)
FK22 2' × 2' Flange Kit
FK24 2' × 4' Flange Kit
FKCR Flange Kit Row Adaptor
Options
FO730
FO735
FO741
FO830
FO835
FO841
PLUS30
PLUS35
PLUS41
EL
GLR
GMF
DG
NYC
NYCU
C388
C488
30K 75CRI T8 Lamps Installed
35K 75CRI T8 Lamps Installed
41K 75CRI T8 Lamps Installed
30K 82CRI T8 Lamps Installed
35K 82CRI T8 Lamps Installed
41K 82CRI T8 Lamps Installed
30K 82CRI 28W T8 Lamps Installed3
35K 82CRI 28W T8 Lamps Installed3
41K 82CRI 28W T8 Lamps Installed3
Emergency Battery Pack
Fast Blow Fuse
Slow Blow Fuse
Dust Guard Clear Acrylic
NYC Compliant
NYC Compliant, Union Label
3-Wire Flex
4-Wire Flex
1
For EnergyMax® Stratus™ Plus, order “-PLUSXX” lamps under “Options.”
Not compatible with T8 25, 28, or 30 watt energy savings lamps.
3
Not recommended for use with step or full dimming.
2
Product Availability
SIZE
NO. OF LAMPS IN
CROSS SECTION
NO. OF LAMPS IN
FIXTURE
LAMP TYPE
2' × 2'
2
2
17
2' × 4'
2
2
32
51/2"
12"
EMSE14
43/4"
24"
EMSE22, EMSE24
7
STE
Stratus™ E-Series Recessed Indirect
RECESSED ARCHITECTURAL
Features
•
Precision optical design produces high
efficiency in a high visual comfort
architecturally direct/indirect distribution
•
Custom perforated metal basket is backed by a
high transmission lamp obscuring overlay
•
Optimized coating process and unique paint
formulation provide exceptional reflectivity
in a matte finish for a soft visual image and
balanced basket and reflector illumination
•
•
Available for use with T8, T5, or T5HO linear
fluorescent and twin tube lamps
•
Optional acrylic dust guard pivots to protect
lamp compartment against contaminants
especially for schools, medical facilities and
public spaces
•
Companion center basket (STE), side basket
(STS) and pendant (STP) models available
•
UL listed 1598, cUL or CSA, Damp Location
Listed
Completely recessed, provides a clean ceiling
with uniform illumination at mounting heights
as low as 8 feet
Ordering Information
STE
–
Model
STE Stratus™
E-Series
Recessed
Indirect
–
No. of Lamps in
Cross section
1 One
2 Two
3 Three
MPO
–
Ceiling type
G Grid Lay-in
SM Surface Mount
–
Ballast
E Electronic T8, Instant Start
ED Electronic Dimming T8
Options
EL
EL5
FO730
FO735
FO741
FO830
FO835
FO841
F5830
and T5
EP Electronic T5, T5HO, or T8,
Programmed Start
ETT Electronic Twin Tube,
Instant Start
Size
14 1' × 4'
22 2' × 2'
24 2' × 4'
Lamp type
14
17
24
28
32
2' T5; 14 Watt
2', T8: 17 Watt
2', T5HO: 24 Watt
4', T5; 28 Watt
4', T8: 32, 30, 28 or
25 Watt
40TT 2', Twin Tube
Compact, 2G11 Base:
40 Watt
54 4', T5HO, 54 Watt
Shielding
MPO Metal Perf
EPTT Electronic Twin Tube,
3E
w/Overlay
3EP
ELW
3ELW
Programmed Start
3-Lamp Electronic T8,
Instant Start
3-Lamp Electronic T8,
Programmed Start
2-Lamp Electronic T8,
0.77 Ballast Factor, Low
Wattage, Instant Start
3-Lamp Electronic T8,
0.77 Ballast Factor, Low
Wattage, Instant Start
Voltage
U 120V-277V
347 347V
F5835
F5841
FTT830
FTT835
FTT841
C388
C488
DG
NYC
NYCU
Accessories
(Order Separately)
FK14 1' × 4' Flange Kit
FK22 2' × 2' Flange Kit
FK24 2' × 4' Flange Kit
Emergency Battery Pack, T8
Emergency Battery Pack, T5
30K 75CRI T8 Lamps Installed
35K 75CRI T8 Lamps Installed
41K 75CRI T8 Lamps Installed
30K 82CRI T8 Lamps Installed
35K 82CRI T8 Lamps Installed
41K 82CRI T8 Lamps Installed
30K 85CRI T5 or T5HO Lamps
Installed
35K 85CRI T5 or T5HO Lamps
Installed
41K 85CRI T5 or T5HO Lamps
Installed
30K 82CRI 40W TT Lamps
Installed
35K 82CRI 40W TT Lamps
Installed
41K 82CRI 40W TT Lamps
Installed
3-Wire Flex
4-Wire Flex
Dust Guard
NYC Compliant
NYC Compliant, Union Label
Product Availability
51/2"
NO. OF LAMPS IN
CROSS SECTION
NO. OF LAMPS IN
FIXTURE
LAMP TYPE
HEIGHT
1' × 4'
1
1
2
3
1
1
2
3
28, 32, 54
40TT
28, 32, 54
28, 32, 54
5¾"
5¾"
5¾"
5¾"
2' × 2'
2
3
2
3
14, 17, 24, 40TT
14, 17, 24, 40TT
4¾"
4¾"
2' × 4'
2
2
3
3
2
4
3
6
28, 32, 54
40TT
28, 32, 54
40TT
4¾"
4¾"
4¾"
4¾"
SIZE
12"
STE14
43/4"
24"
STE22, STE24
8
STEL
Stratus™ E-Series Center Louver Recessed Indirect
Features
Precision optical design produces high
efficiency in a high visual comfort
architecturally direct/indirect distribution
•
•
Custom perforated metal basket is backed by
a high transmission lamp obscuring overlay
and features choice of steel cross baffle or high
efficiency parabolic louvers
Available for use with T8, T5, or T5HO linear
fluorescent lamps and twin tube
•
Optimized coating process and unique paint
formulation provide exceptional reflectivity
in a matte finish for a soft visual image and
balanced basket and reflector illumination
Optional acrylic dust guard pivots to protect
lamp compartment against contaminants
especially for schools, medical facilities and
public spaces
•
Companion center basket (STE), side basket
(STS) and pendant (STP) models available
•
UL listed 1598, cUL or CSA, Damp Location
Listed
•
•
RECESSED ARCHITECTURAL
•
with uniform illumination at mounting heights
as low as 8 feet
Completely recessed, provides a clean ceiling
Ordering Information
STEL
–
Model
STEL Stratus™
E-Series
Center
Louver
Recessed
Indirect
MPO
–
No. of lamps
1 One
2 Two
3 Three
Ceiling type
G Grid Lay-in
SM Surface Mount
–
–
Shielding
MPO Metal Perf w/Overlay
Voltage
U 120V-277V
347 347V
See Product Availability
table below.
Size
14 1' × 4'
22 2' × 2'
24 2' × 4'
Lamp type
14
17
24
28
32
2', T5: 14 Watt
2', T8: 17 Watt
2', T5HO: 24 Watt
4', T5: 28 Watt
4', T8: 32, 30, 28 or
25 Watt
40TT 2', Twin Tube Compact,
2G11 Base: 40 Watt
54 4', T5HO: 54 or 51 Watt
Accessories
(Order Separately)
FK14 1' × 4' Flange Kit
FK22 2' × 2' Flange Kit
FK24 2' × 4' Flange Kit
Louver type
High Efficiency (H)*
HLS Low Iridescent Specular
Ballast
E Electronic T8, Instant Start
ED Electronic Dimming T8
Parabolic
HMA Matte Anodized Low
Iridescent Semi-Specular
EP
White Steel Cross Baffle
WCB White Cross Baffle
WPB White Perforated Cross Baffle
WCBO White Cross Baffle with Baffle
ETT
EPTT
3E
Overly
WPBO White Perforated Cross Baffle
with Baffle Overlay
*N/A with 3-40TT Lamps
3EP
ELW
3ELW
and T5
Electronic T5, T5HO, or T8,
Programmed Start
Electronic Twin Tube,
Instant Start
Electronic Twin Tube,
Programmed Start
3-Lamp Electronic T8,
Instant Start
3-Lamp Electronic T8,
Programmed Start
2-Lamp Electronic T8,
0.77 Ballast Factor, Low
Wattage, Instant Start
3-Lamp Electronic T8,
0.77 Ballast Factor, Low
Wattage, Instant Start
Options
EL Emergency
Battery Pack
EL5 Emergency
GLR
GMF
DG
NYC
NYCU
Battery Pack, T5
Fast Blow Fuse
Slow Blow Fuse
Dust Guard
NYC Compliant
NYC Compliant,
Union Label
Product Availability
NO. OF LAMPS IN
CROSS SECTION
NO. OF LAMPS IN
FIXTURE
LAMP TYPE
HEIGHT
1' × 4'
1
1
2
1
2
2
28, 32, 54
40TT
28, 32, 54
5¾"
5¾"
5¾"
2' × 2'
1
2
3
1
2
3
14, 17, 24
14, 17, 24, 40TT
14, 17, 24, 40TT*
4¾"
4¾"
4¾"
2' × 4'
1
2
2
3
1
2
4
3
28, 32, 54
28, 32, 54
40TT
28, 32, 54
4¾"
4¾"
4¾"
4¾"
SIZE
51/2"
12"
STEL14
43/4"
24"
STEL22, STEL24
*3-lamp 40TT available in white steel cross baffle only.
9
STS
Stratus™ Recessed Indirect Side Basket
RECESSED ARCHITECTURAL
Features
•
Softly glowing side baskets create an
elegant aesthetic statement
•
Available for T8, Twin Tube, Linear T5, or
T5HO lamps
•
Baskets and reflector are powder coated
after fabrication
•
1' × 4', 2' × 2', and 2' × 4'
•
Surface mount available
•
Simple to install, easy to maintain
•
UL listed 1598, cUL or CSA. Damp
Location standard
Ordering Information
STS
–
Model
STS Stratus™
–
No. of Lamps in
Cross Section
Recessed
Indirect
Side Basket
MPO
Ceiling type
G Grid Lay-in
SG Slot Grid
SM Surface Mount
1 One
2 Two
4 Four
–
–
–
Air function
Blank Static
A Air Handling
Voltage
U 120V-277V
347 347V
See Product Availability
table below.
Size
14 1' × 4'
22 2' × 2'
24 2' × 4'
Lamp type
14
17
24
28
32
2', T5: 14 Watt
2', T8: 17 Watt
2', T5HO: 24 Watt
4', T5: 28 Watt
4', T8: 32, 30, 28 or
25 Watt
40TT Twin Tube Compact,
2G11 Base: 40 Watt
54 4', T5HO: 54 or 51 Watt
Shielding
MPO Metal Perf
w/Overlay
Ballast
NOTE: See Technical Section for
other ballast options.
E Electronic T8, Instant Start
4E 4-Lamp Electronic T8,
Instant Start
ED Electronic Dimming T8 and T5
EP Electronic T5, T5HO, or T8,
Programmed Start
ETT Electronic Twin Tube,
Instant Start
Options
EL Emergency
GLR
GMF
NYC
NYCU
Battery Pack
Fast Blow Fuse
Slow Blow Fuse
NYC Compliant
NYC Compliant,
Union Label
Accessories
(Order Separately)
FK14
FK22
FK24
FKCR
1' × 4' Flange Kit
2' × 2' Flange Kit
2' × 4' Flange Kit
Flange Kit Continuous Row Connector
Product Availability
5¾"
5¾"
12"
STS14-1
NO. OF LAMPS IN
FIXTURE
LAMP TYPE
HEIGHT
24"
STS22-240TT, STS24-240TT
1' × 4'
1
1
2
1
2
2
28, 32, 54
40TT
28, 32, 54
5¾"
5¾"
5¾"
2' × 2'
2
2
4
2
2
4
14, 17, 24
40TT
14, 17, 24
5¾"
5¾"
5¾"
2' × 4'
2
2
4
2
4
4
28, 32, 54
40TT
28, 32, 54
5¾"
5¾"
5¾"
5¾"
5¾"
24"
STS22-217, STS24-232
10
NO. OF LAMPS IN
CROSS SECTION
SIZE
24"
STS22-417, STS24-432
STSL
Stratus™ Side Basket with Louver
Features
High performance louver, accentuated
by softly glowing perforated side
baskets
•
True parabolic louver directs light with
pinpoint precision and reduces glare
•
Direct component dramatically increases
efficiency when compared to other side
basket recessed indirects
•
Contractor friendly; easy to install and
maintain
•
Light reflector and baskets are powder
coated after fabrication
•
UL listed 1598, cUL or CSA. Damp
Location standard
RECESSED ARCHITECTURAL
•
Ordering Information
STSL
–
Model
STSL Stratus™
Side Basket
with Louver
–
No. of Lamps in
Cross Section
Ceiling type
G Grid Lay-in
SG Slot Grid
SM Surface Mount
1 One
2 Two
4 Four
MPO
–
Shielding
MPO Metal Perf
w/Overlay
–
Air function
Blank Static
A Air Handling
–
Voltage
U 120V-277V
347 347V
See Product Availability
table below.
Size
14 1' × 4'
22 2' × 2'
24 2' × 4'
Lamp type
14
17
24
28
32
2', T5: 14 Watt
2', T8: 17 Watt
2', T5HO: 24 Watt
4', T5: 28 Watt
4', T8: 32, 30, 28
or 25 Watt
40TT Twin Tube Compact,
2G11 Base: 40 Watt
54 4', T5HO: 54 or
51 Watt
Louver finish
GW Gloss White Enamel
LS Low Iridescent Specular
Parabolic Louver
MA Matte Anodized Low
Iridescent SemiSpecular Aluminum
M4R 95% Reflective Specular
Aluminum
Ballast
NOTE: See Technical Section for other
ballast options.
E Electronic T8, Instant Start
ED Electronic Dimming T8 and T5
EP Electronic T5, T5HO, or T8,
Programmed Start
ETT Electronic Twin Tube, Instant Start
Options
EL Emergency
GLR
GMF
NYC
NYCU
Battery Pack
Fast Blow Fuse
Slow Blow Fuse
NYC Compliant
NYC Compliant,
Union Label
Accessories
(Order Separately)
FK14 1' × 4' Flange Kit
FK22 2' × 2' Flange Kit
FK24 2' × 4' Flange Kit
Product Availability
NO. OF LAMPS IN
CROSS SECTION
NO. OF LAMPS IN
FIXTURE
LAMP TYPE
HEIGHT
1' × 4'
1
1
2
1
2
2
28, 32, 54
40TT
28, 32, 54
5¾"
5¾"
5¾"
2' × 2'
2
2
4
2
2
4
14, 17, 24
40TT
14, 17, 24
5¾"
5¾"
5¾"
2
2
4
2
4
4
28, 32, 54
40TT
28, 32, 54
5¾"
5¾"
5¾"
SIZE
2' × 4'
5¾"
5¾"
11¾"
STSL14-132
24"
STSL22-417, STSL24-432
5¾"
24"
STSL22-217, STSL24-232
11
STP
Stratus™ Surface or Pendant Mounted
RECESSED ARCHITECTURAL
Features
•
Contemporary aesthetics create visual
interest
•
Surface mounting standard. Cable mounting
available
•
Low profile nominal 1' × 4'
•
•
Choice of perforated baskets or baffles
inset in perforated baskets provide radiant
illumination in a choice of aesthetic options
4' and 8' lengths facilitate single or in-row
mounting
•
Indirect components reflect light for a
soft and even illumination on vertical and
horizontal surfaces
Full product family includes Stratus fully
recessed units for applications where a
complementary appearance is desired
•
UL listed 1598, cUL or CSA, Damp Location
Listed
•
•
Direct lighting component enhances facial
delineation
Ordering Information
STP
–
Model
STP Stratus™
Surface or
Pendant
Mounted
2
–
Shielding
MPO Metal Perf w/Overlay
WCBMPO White Cross Baffle inset
No. of Lamps in
cross section
2 Two
in perforated metal
WPBMPO White Perforated
Cross Baffle inset in
perforated metal
See Product
Availability table
below.
SIZE
14 1' × 4'
18 1' × 8'
–
Lamp Type
28 4', T5: 28 Watt
32 4', T8: 32, 30, 28 or 25 Watt
54 4', T5HO: 54 or 51 Watt
–
–
Reflector Type
ST Solid Type Reflector
Options
EL Emergency
Voltage
U 120V-277V
347 347V
(Std.)
U Apertured Uplight
Battery Pack
(Small case size)
GLR Fast Blow Fuse
GMF Slow Blow Fuse
NYC NYC Compliant
NYCU NYC Compliant,
Union Label
For more options see
pages 96-112.
Reflector
Ballast
Note: See Technical Section for other
ballast options.
E Electronic T8, Instant Start
3E 3-Lamp Electronic T8, Instant Start
4E 4-Lamp Electronic T8, Instant Start
EP Electronic T8, Programmed Start
Accessories
(Order separately)
CM24 24" Adjustable Cable
Mounting Kit
CM48 48" Adjustable Cable
Mounting Kit
Cable mounting kits are ordered and
shipped separately from fixture. Other
lengths are available on request.
12"
Product Availability
45/16"
STP14-2
12
SIZE
NO. OF LAMPS IN
CROSS SECTION
NO. OF LAMPS
IN FIXTURE
LAMP TYPE
WIDTH
LENGTH
HEIGHT
1' × 4'
2
2
28, 32, 54
12"
483/16"
45/16"
1' × 8'
2
4
28, 32, 54
12"
963/16"
45/16"
EMI
EnergyMax® Intersect™ Full Distribution Luminaire
Features
Full distribution optics from a
louvered fixture
•
Rolled fixture edges for safe handling
during fixture installation
•
Euro style ribbed louver with
architectural styling
•
Corner hinging for easy insertion and
removal of louver from either side
•
Typically qualifies for EPAct tax
deduction
•
Housing ends secured by unique corner
interlock and screws
•
Integral hinges and latches on louver
provide a clean finish
•
UL listed 1598, cUL or CSA. Damp
Location standard
•
Mechanical light seal
RECESSED ARCHITECTURAL
•
Ordering Information
EMI
Model
EMI EnergyMax®
Intersect2
2
G
No. of lamps
2 Two
Ceiling type
G Grid
–
Size
22 2' × 2'5
24 2' × 4'
–
For hard ceilings
use flange kit.
Lamp type
14
17
24
28
31U1
2', T5: 14 Watt
2', T8: 17 Watt
2', T5HO: 24 Watt
4', T5: 28 Watt
U-Bent, 1⅝" Leg
Spacing T8: 31 Watt
32 4', T8: 32 Watt
40TT Twin Tube Compact,
2G11 Base: 40 Watt
54 4', T5HO: 54 Watt
Ballast
E Electronic T8, 0.88 Ballast Factor, Instant
Start
ESD Electronic T8, 0.88 Ballast Factor, Step
ELW
EHL
E104
ESD104
EP104
Accessories
(Order Separately)
FK22 2' × 2' Flange Kit
FK24 2' × 4' Flange Kit
FKCR Flange Kit Row Adaptor
EP
EP95
ESD95
EP115
1
Not compatible with T8 25, 28 or 30 watt energy savings lamps.
For EnergyMax® Intersect™ Plus, order “-PLUSXX” lamps under
“Options.”
3
Where available.
4
DL not available for all EL ballast combinations, contact factory.
5
2'× 2' models not suitable for continuous row mount
applications.
6
Not recommended for use with step or full dimming.
2
ESD115
ETT
EPTT
Dimming, Programmed Start1
Electronic T8, 0.77 Ballast Factor, Low
Wattage, Instant Start
Electronic T8, 1.18 Ballast Factor, High
Wattage, Instant Start
Electronic T8, 1.04 Ballast Factor, Instant
Start2 (N/A 1-Lamp)
Electronic T8, 1.04 Ballast Factor, Step
Dimming, Programmed Start1,2
Electronic T8, 1.04 Ballast Factor,
Programmed Start2
Electronic T5, T5HO, or T8, Programmed Start
Electronic T5, 0.95 Ballast Factor,
Programmed Start
Electronic T5, 0.95 Ballast Factor, Step
Dimming, Programmed Start
Electronic T5, 1.15 Ballast Factor,
Programmed Start
Electronic T5, 1.15 Ballast Factor, Step
Dimming, Programmed Start
Electronic Twin Tube, Instant Start (Specify
voltage)
Electronic Twin Tube, Programmed Start
–
Voltage
U 120V-277V
347 347V3
Options
FO730
FO735
FO741
FO830
FO835
FO841
PLUS830
PLUS835
PLUS841
FOH830
FOH835
FOH841
F5830
F5835
F5841
F5H830
F5H835
F5H841
C388
C488
EL
GLR
GMF
NYC
NYCU
30K 75CRI T8 Lamps Installed
35K 75CRI T8 Lamps Installed
41K 75CRI T8 Lamps Installed
30K 82CRI T8 Lamps Installed
35K 82CRI T8 Lamps Installed
41K 82CRI T8 Lamps Installed
30K 82CRI 28W T8 Lamps Installed 6
35K 82CRI 28W T8 Lamps Installed 6
41K 82CRI 28W T8 Lamps Installed 6
30K High Lumen T8 Lamps Installed
35K High Lumen T8 Lamps Installed
41K High Lumen T8 Lamps Installed
30K 85CRI T5 or T5HO Lamps Installed
35K 85CRI T5 or T5HO Lamps Installed
41K 85CRI T5 or T5HO Lamps Installed
30K High Lumen T5 Lamps Installed
35K High Lumen T5 Lamps Installed
41K High Lumen T5 Lamps Installed
3-Wire Flex
4-Wire Flex
Emergency Battery Pack4
Fast Blow Fuse
Slow Blow Fuse
NYC Compliant
NYC Compliant, Union Label
Product Availability
SIZE
NO. OF
LAMPS
LAMP TYPE
LOUVER
CONFIGURATIONS
2' × 2'
2
14, 17, 24, 31U1, 40TT
2 × 3 (6)
2' × 4'
2
28, 32, 54
2 × 6 (12)
3¾"
4⅜"
9⅝"
23¾"
EMI22-2
9⅝"
23¾"
EMI24-2
13
ZPT
Zero Plenum® Troffer High Efficiency Architectural Luminaire
RECESSED ARCHITECTURAL
Features
•
Soft, uniform light distribution provides
excellent vertical illumination free from
harsh contrast
•
Does not intrude into usable plenum space
•
Multiple shielding options include linear
prismatic lens, injection molded, high
impact acrylic baffle, or descending
perforated metal diffuser
•
Employs T5 or T5HO technology for high
efficiency and high performance
•
Housing depth of only 1½" for a luminaire
no taller than standard T-Bar rails
•
Three reflector options provide customized
aesthetics
•
Unique telescoping housing minimizes
installation depth and simplifies
installation
•
UL listed 1598, cUL or CSA. Damp Location
standard
Ordering Information
ZPT
–
Model
ZPT Zero Plenum®
2
–
No. of lamps
2 Two
Troffer
Size
14 1' × 4'
22 2' × 2'
24 2' × 4'
Ceiling type
G Grid Lay-in
SM Surface Mount2
Lamp type
14
24
28
54
2', T5: 14 Watt
2', T5HO: 24 Watt
4', T5: 28 Watt
4', T5HO: 54 or
51 Watt
Accessories (Order Separately)
FK14 1' × 4' Flange Kit
FK22 2' × 2' Flange Kit
FK24 2' × 4' Flange Kit
FKCR Flange Kit Row Adaptor
ZPTSMK22 ZPT Surface Mounting Kit (2'x 2')
ZPTSMK24 ZPT Surface Mounting Kit (2'x4')
Lens with Surface
Relief Diffuser
PRF Metal Perf w/Overlay
(N/A w/ 1×4)
SB Solid Basket
Recessed only.
Zero Plenum may be ordered as a factory-assembled surface mounted
unit ordered as grid (“G”) ceiling type and surface mounted in the field
using the ZPTSMK surface mounting kit.
3
Where available.
2
1½"
1½"
1¾"
24"
PRF - Metal Perf with Overlay 2 × 4
12"
FCB - Flush Curved Baffle 1 × 4
1½"
12"
LSR - Linear Prismatic Lens 1 × 4
1½"
1⅞"
Surface Mount
14
10⅞"
Compressed Dimension 1 × 4
1½"
24"
FCB - Flush Curved Baffle
–
Voltage
U 120V-277V
347 347V
Ballast
NOTE: See Technical Section for
other ballast options.
EP Electronic T5, 1.00 Ballast
Factor (28W or 54W)
EP95 Electronic T5, 0.95 Ballast
Factor (28W only)
EP115 Electronic T5, 1.15 Ballast
Factor (28W only)
ED Electronic T5, 1.00 Ballast
Factor, Variable Dimming
Ballast (28W or 54W)
ESD95 Electronic T5, 0.95 Ballast
Factor, Step Dimming
(28W only)
ESD115 Electronic T5, 1.15 Ballast
Factor, Step Dimming
(28W only)
Note: Step dimming ballasts use
two hot leads for 100% (both on)
or 50% (one on) power.
Options
C38890 3-Wire Flex, 90°
C48890
GLR
GMF
TB4
EL5
F5835
F5841
NYC
NYCU
Connector1
4-Wire Flex
(Step Dimming or
-EL Option1
Fast Blow Fuse
Slow Blow Fuse
(4) Bulk T-Bar Clips1
Emergency Battery
Pack (N/A 2 x 2)
35K 85CRI T5
or T5HO Lamps
Installed
41K 85CRI T5
or T5HO Lamps
Installed
NYC Compliant
NYC Compliant,
Union Label
Product Availability
1½"
22⅞"
Compressed Dimension
Reflector
O Open (N/A with PRF)
R Ribbed Curve (N/A w/ 1 × 4)
S Smooth Curve (N/A w/ 1 × 4)
Shielding
FCB Flush Curved Baffle
LSR Linear Prismatic
1
1½"
–
LSR - Linear Prismatic Lens
SIZE
NO. OF
LAMPS
LAMP
TYPE
COMPRESSED
WIDTH
INSTALLED
WIDTH
LENGTH
HEIGHT
1' × 4'
2
28, 54
10⅞"
11¾"
47¾"
1½"
2' × 2'
2
14, 24
22⅞"
23¾"
23¾"
1½"
2' × 4'
2
28, 54
22⅞"
23¾"
47¾"
1½"
COV
Covelight
Features
Unique design provides wide
distribution, far superior to standard or
staggered strip lights
•
Modular lengths simplify installation
•
Quick disconnect plugs make row wiring
easy
•
Notched reflector eliminates socket
shadows
•
•
Maximum efficiency for Cove
applications
Hinged reflector allows quick access to
wireway
•
•
Shallow 37⁄16" (T8) or 17/8" (T5) housing
profile
Built-in aligner tabs align fixture
housings, simplify continuous row
installation
•
•
T8, T5 or T5HO
UL listed 1598, cUL or CSA. Damp
Location standard
RECESSED ARCHITECTURAL
•
Ordering Information
COV
–
Model
COV Covelight
–
No. of Lamps
in Cross Section
Size
2 2'
3 3'
4 4'
6 6'
8 8'
1 One
2 Two (N/A with TT lamps)
See Product Availability
table below.
–
Lamp type
Ballast
2', T5: 14 Watt
2', T8: 17 Watt
3', T5: 21 Watt
2', T5HO: 24 Watt
3', 25 Watt, T8
4', T5: 28 Watt
4', T8: 32, 30, 28
or 25 Watt
39 3', T5HO: 39 Watt
40TT Twin Tube Compact,
2G11 Base: 40 Watt
54 4', T5HO: 54 Watt
NOTE: See Technical
Section for other
ballast options.
E Electronic T8,
Instant Start
ED Electronic
Dimming T8
and T5
EP Electronic T5,
T5HO, or T8,
Programmed
Start
ETT Electronic Twin
Tube, Instant
Start
14
17
21
24
25
28
32
Product Availability
SIZE
2'
3'
4'
6'
8'
Voltage
U 120V-277V
347 347V
37⁄16"
NO. OF LAMPS IN
CROSS SECTION
NO. OF LAMPS IN
FIXTURE
LAMP TYPE
WIDTH
LENGTH
HEIGHT
1
1
2
1
1
2
17, 40TT
14, 24
14, 17, 24
75⁄16"
6¼"
75⁄16"
24"
2211⁄16"
24"
37⁄16"
1⅞"
37⁄16"
1
1
2
1
1
2
25
21, 39
21, 25, 39
75⁄16"
6¼"
75⁄16"
36"
34½"
36"
37⁄16"
1⅞"
37⁄16"
1
1
2
1
1
2
32
28, 54
28, 32, 54
75⁄16"
6¼"
75⁄16"
48"
455⁄16"
48"
37⁄16"
1⅞"
37⁄16"
1
1
2
2
2
4
25
21, 39
21, 25, 30
75⁄16"
6¼"
75⁄16"
72"
69¾"
72"
37⁄16"
1⅞"
37⁄16"
1
1
2
2
2
4
32
28, 54
28, 32, 54
75⁄16"
6¼"
75⁄16"
96"
927⁄16"
96"
37⁄16"
1⅞"
37⁄16"
Options
EL
GLR
GMF
MS
SMS
SMSS
NYC
NYCU
Emergency Battery Pack
Fast Blow Fuse
Slow Blow Fuse
Master/Satellite
(2 fixtures, 1 ballast)
Satellite/Master/
Satellite
(3 fixtures, 1 ballast)
Satellite/Master
Satellite/Satellite
(4 fixtures, 1 ballast)
NYC Compliant
NYC Compliant, Union
Label
37⁄16"
229⁄32"
229⁄32"
75⁄16"
75⁄16"
COV4-132
37⁄16"
229⁄32"
COV2-140TT
1⅞"
75⁄16"
COV4-232
6¼"
COV4-128, COV4-154
37⁄16"
229⁄32"
75⁄16"
COV4-228, COV4-254
15
BR
Brio® T5 Low Glare
RECESSED ARCHITECTURAL
Features
•
Unique aesthetic combines dedicated louvers
with perforated face
•
Double wall wash (2WW) option for corridors,
small offices, or conference rooms
•
Excellent glare control for spaces where
computers are in use; RP-1 compliant options
•
T5 or T5HO technology offers an exceptional
lumen package
•
2½" deep ultra-shallow housing frees up
plenum space, fits into tight areas, and is
easy to handle and install
•
Dedicated louvers create an optical envelope
to provide maximum contribution from each
lamp
•
Precise batwing distribution is ideal for
8' × 8' and 8' × 10' spacings
•
UL listed 1598, cUL or CSA. Damp Location
standard
•
Wall wash (1WW) option lights walls to
eliminate “cave effect”
Ordering Information
BR
Model
BR Brio® T5
–
Low Glare
–
No. of lamps
2 Two
3 Three
See Product Availability
table below.
Size
22 2' × 2'
24 2' × 4'
Ceiling type
G Grid
SG Slot Grid
SM Surface
Lamp type
14
24
28
54
2', T5: 14 Watt
2', T5HO: 24 Watt
4', T5: 28 Watt
4', T5HO: 54 or 51 Watt
–
EP
PERFORATED FACE
MPO Metal Perf
w/Overlay
ST Solid (No Perf)
–
Voltage
U 120V-277V
347 347V
Options
F5830 30K 85CRI T5 or T5HO
Lamps Installed
F5835 35K 85CRI T5 or T5HO
Lamps Installed
F5841 41K 85CRI T5 or T5HO
Ballast
Louver finish
LS Low Iridescent Specular
MA Matte Anodized Low
NOTE: See Technical Section
for other ballast options.
EP Electronic,
Programmed Start
Iridescent SemiSpecular Aluminum
M4R 95% Reflective Specular
Aluminum
MW Matte White
1WW
2WW
C388
C488
EL5
GLR
GMF
PAF
NYC
NYCU
Lamps Installed
Asymmetric Wall Wash
Double Wall Wash
3-Wire Flex
4-Wire Flex
Emergency Battery Pack
(Use low profile only)
Fast Blow Fuse
Slow Blow Fuse
Paint After Fabrication
NYC Compliant
NYC Compliant, Union
Label
Accessories
(Order Separately)
FK22 2' × 2' Flange Kit
FK24 2' × 4' Flange Kit
FKCR Flange Kit Continuous
Row Connector
PRODUCT AVAILABILITY
2½"
24"
BR22-2, BR24-2
LAMP TYPE
DEDICATED
LOUVERS
PERFORATED
PANELS
FIXTURE
HEIGHT
CEILING TYPE
2' × 2'
2
3
14, 24
14, 24
2
3
3
2
2½"
2½"
G, SG
G, SG
2' × 4'
2
3
28, 54
28, 54
2
3
3
2
2½"
2½"
G, SG
G, SG
Standard ceiling type shown in bold.
2½"
24"
BR22-3, BR24-3
16
NO. OF LAMPS IN
CROSS SECTION
SIZE
BR STRETTO
Brio® Stretto 4" T5 Low Glare
Features
Narrow aperture dedicated louver for
single or row mounting
•
Wall wash (1WW) option lights walls to
eliminate “cave effect”
•
3½" deep low profile housing maximizes
available plenum space
•
•
Precise batwing distribution is ideal for
8' × 8' and 8' × 10' spacings
Double wall wash (2WW) option for
corridors, small offices, or conference
rooms
•
GT (integral cross-tee) trim supports
ceiling tile for easy installation
T5 or T5HO technology offers an
exceptional lumen package
•
UL listed 1598, cUL or CSA. Damp
Location standard
•
•
Continuous row mounting
RECESSED ARCHITECTURAL
•
Ordering Information
BR
1
–
Model
BR Brio® Stretto
4" T5 Low
Glare
–
Ceiling Type
GT Integral Cross Tee
no. of lamps
1 One
See Product Availability
table below.
SGT
Size
G
Lamp type
042 4" × 2' (Recessed)
044 4" × 4' (Recessed)
14
24
28
54
Accessories
(Order Separately)
FK042 4" × 2' Flange Kit
FK044 4" × 4' Flange Kit
FKCR Flange Kit
2', T5: 14 Watt
2', T5HO: 24 Watt
4', T5: 28 Watt
4', T5HO: 54 Watt
SM
SG
EP
–
–
Ballast
(Grid ends lay into
T-Bar, sides act as
integral cross-tee to
support ceiling tile)
Slot Grid Integral
Cross Tee
Grid (Standard 1"
flat lay-in T-Bar)
Surface/Pendant
Mount
Slot Grid
Voltage
U 120V-277V
347 347V
NOTE: See Technical
Section for other
ballast options.
EP Electronic,
Programmed
Start
Options
F5830 30K 85CRI T5 or T5HO
Lamps Installed
F5835 35K 85CRI T5 or T5HO
Lamps Installed
F5841 41K 85CRI T5 or T5HO
1WW
2WW
C388
EL
Louver Finish
LS Low Iridescent Specular
MA Matte Anodized Low
Iridescent Semi-Specular
Aluminum
M4R 95% Reflective Specular
Aluminum
MW Matte White
GLR
GMF
PAF
NYC
NYCU
Lamps Installed
Asymmetric Wall Wash
Double Wall Wash
3-Wire Flex
Emergency Battery Pack
(Low profile)
Fast Blow Fuse
Slow Blow Fuse
Paint After Fabrication
NYC Compliant
NYC Compliant, Union
Label
Continuous Row
Connector
3½"
PRODUCT AVAILABILITY
SIZE
NO. OF LAMPS IN
CROSS SECTION
LAMP TYPE
DEDICATED
LOUVERS
FIXTURE
HEIGHT
TRIM OPTIONS
(STANDARD BOLD)
4" × 2'
1
14, 24
1
3½"
GT, SGT, G, SM
4" × 4'
1
28, 54
1
3½"
GT, SGT, G, SM
Type GT (Shown in 2' × 4' T-Bar installation)
3½"
24"
4½"
G
3½"
48"
3½"
3"
5¼"
GT
10"
Type GT integral cross-tee recommended for most T-Bar
ceilings. Rest ends on tee and center in the opening. Cut
the ceiling tile into two 10" strips. Drop the ceiling tile
into place. Maximum tee widths of 1" and maximum tee
heights of 1½" allowed.
2⅝"
6"
SM
17
AC
Architectural Cove
RECESSED ARCHITECTURAL
Features
•
Recessed indirect coffer provides the
appearance of a handcrafted cove at a
fraction of the cost
•
Available for type G lay-in ceilings,
type F plaster ceilings, or sheet rocked
ceilings
•
Customized appearance available with
optional trim colors
•
UL listed 1598, cUL or CSA. Damp
Location standard
•
Aesthetic variety provided by wood,
brass, or painted steel trim
Ordering Information
AC
4
–
Model
AC Architectural
–
No. of lamps
4 Four
Cove
Ceiling
Compatibility
See Product Availability
table below.
2' × 2'
3' × 3'
4' × 4'
5' × 5'
14½", 26½"
38½" or 50½"
Voltage
U 120V-277V
347 347V
G Grid Trim (For 1"
inverted T-Bar)
F Overlap Flange Trim
(For hard ceilings)
Lamp Type
Ballast
2', T5: 14 Watt (3' × 3')
2', T8: 17 Watt (3' × 3')
3', T5: 21 Watt (4' × 4')
2', T5HO: 24 Watt (3' × 3')
3', T8: 25 Watt (4' × 4')
4', T5: 28 Watt (5' × 5')
4', T8: 32 Watt (5' × 5')
16½", TT: 36 Watt (2' × 2')
3', T5HO: 39 Watt (4' × 4')
4', T5HO: 54 Watt (5' × 5')
See Product Availability table below.
NOTE: See Technical Section for
other ballast options.
E Electronic T8, Instant Start
4E 4-Lamp Electronic T8,
Instant Start
ED Electronic Dimming T8
EP Electronic T5, Programmed
Start
4EP 4-Lamp Electronic T5,
Programmed Start
ETT Electronic Twin Tube,
Instant Start
Size
22
33
44
55
14
17
21
24
25
28
32
36
39
54
SIZE
24", 36", 48" or 60"
Type “G”
3¾"
24¾", 36¾", 48¾" or 60¾"
O.A. Trim Type “F”
18
–
–
Custom trim
(optional)
CZIG Classical Ziggurat Step
WOOD Specify cherry or oak
Skirt Color
MW Matte White (Std.)
Options
EFH Extended Flange
Hanger (Minimum
2½", maximum 4"
depth adjustment
GLR Fast Blow Fuse
GMF Slow Blow Fuse
Product Availability
9"
3¾"
14½", 26½"
38½" or 50½"
MW
–
9"
The flanged AC is installed by drawing
the upper housing (1) into the ceiling by
vertically adjustable wing hangers. The lower
decorative skirt assembly (2) is then attached
and drawn tight against the finished ceiling
without the use of tools. Relamping may be
done by reaching over the skirt assembly.
NO. OF
LAMPS
LAMP TYPE
SOCKET
TYPE
LAMP
DESCRIPTION
LAMP
LENGTH
2' × 2'
4
36
2G11
Twin Tube
16½"
3' × 3'
4
14, 17, 24
Bi-pin
Programmed Start
2'
4' × 4'
4
21, 25, 39
Bi-pin
Programmed Start
3'
5' × 5'
4
28, 32, 54
Bi-pin
Programmed Start
4'
EMX
EnergyMax® Energy Saving Parabolic
Features
Enhanced optics deliver 89% efficiency
(2' × 4')
•
Typically qualifies for EPAct tax deduction
(2' × 4')
•
Nominal 3" deep louver provides excellent
glare control for today’s architectural
interiors with maintenance-free operation
•
Shallow housing allows installation in
restricted ceiling plenums
•
•
Optimized for standard T8 lamp technology,
tuned ballast reduces power usage to 67
watts (2' × 4')
Full black reveal provides floating door
appearance and full air handling capabilities
•
Custom MIRO® formulation louver developed
by Alanod for Columbia Lighting
•
UL listed 1598, cUL or CSA. Damp Location
standard
•
EnergyMax® Plus parabolic uses 28W T8
lamps to reduce power usage to 56 watts
PA R A B O L I C S
•
Ordering Information
EMX
2
G
No. of lamps
2 Two
Ceiling Type
G Grid
–
Model
EMX EnergyMax®
Energy Saving
Parabolic
M5
–
Lamp type
14 2', T5: 14 Watt
17 2', T8: 17 Watt
24 2', T5HO: 24
28
32
32U6
54
–
–
CELLS WIDE BY
CELLS LONG
For hard ceilings
use flange kit.
Size
22 2' × 2'
24 2' × 4'
–
Louver
Finish
M5 MIRO-5
Watt
4', T5: 28 Watt
4', T8: 32, 30,
28 or 25 Watt
U-Bent, 6" Leg
Spacing T8: 32
Watt
4', T5HO: 54 or
51 Watt
See Product
Availability table
below.
CV
CD
CVD
H
HD
Options
PLUS30 30K 82CRI 28W T8
Lamps Installed1
PLUS35 35K 82CRI 28W T8
Lamps Installed1
AIR handling
S Static
A Air Handling
AV Air Handling
C
Accessories
(ORDER SEPARATELY)
FK24 2' × 4' Flange Kit
FK22 2' × 2' Flange Kit
FKCR Flange Kit Row Adaptor
Voltage
U 120V-277V
347 347V
w/Supply
Vanes
Combination
Supply/Extract
Combination
Supply Vanes/
Extract
Combination
Supply Extract
Dampers
Combination
Supply Vanes
Extract
Dampers
Heat Extract
Heat Extract
w/Dampers
Ballast
E Electronic T8, 0.88 Ballast Factor,
Instant Start
ESD Electronic T8, 0.88 Ballast Factor,
Step Dimming, Programmed Start
ELW Electronic T8, 0.77 Ballast Factor,
Low Wattage, Instant Start
EHL Electronic T8, 1.18 Ballast Factor,
E104
ESD104
EP104
EP
EP95
EP115
ESD95
1
Not recommended for use with step or full dimming.
2
Not compatible with T8 25, 28, or 30 watt energy savings lamps.
3
For EnergyMax® Intersect™ Plus, order “-PLUSXX” lamps under “Options.”
ESD115
High Wattage, Instant Start
Electronic T8, 1.04 Ballast Factor,
Instant Start3 (N/A 1-Lamp)
Electronic T8, 1.04 Ballast Factor,
Step Dimming, Programmed
Start2,3
Electronic T8, 1.04 Ballast Factor,
Programmed Start3
Electronic T5, T5HO, or T8,
Programmed Start
Electronic T5, 0.95 Ballast Factor,
Programmed Start
Electronic T5, 1.15 Ballast Factor,
Programmed Start
Electronic T5, 0.95 Ballast Factor,
Step Dimming, Programmed Start
Electronic T5, 1.15 Ballast Factor,
Step Dimming, Programmed Start
PLUS41 41K 82CRI 28W T8
FO830
FO835
FO841
F5835
C388
C488
EL
GLR
GMF
TB4
NYC
NYCU
Lamps Installed1
30K 82CRI T8
Lamps Installed
35K 82CRI T8
Lamps Installed
41K 82CRI T8
Lamps Installed
35K 85CRI T5
Lamps Installed
3-Wire Flex
4-Wire Flex
Emergency Battery
Pack
Fast Blow Fuse
Slow Blow Fuse
Four Bulk T-Bar
Clips
NYC Compliant
NYC Compliant,
Union Label
PRODUCT AVAILABILITY
SIZE
NO. OF
LAMPS
LAMP TYPE
LOUVER CONFIGURATIONS
2' × 2'
2
14, 17, 24, 32U6
2 × 3 (6), 3 × 3 (9)
2' × 4'
2
28, 32, 54
2 × 6 (12)
53⁄16"
313⁄16"
4⅞"
3½"
24"
24"
EMX22-2
EMX24-2
19
P2
High Efficiency Static Parabolic
PA R A B O L I C S
Features
•
3" deep cell louver combined with
maximum luminous opening, ideal for
retail environments
•
Meets IES standard RP-1 glare control
recommendations on various models
•
Ideal for today’s computer intensive
office
•
Wide light distribution provides uniform
illumination
•
Utilizes the entire opening of the
module to maximize light output
•
Anodized low iridescent aluminum
louver
•
Surface and pendant mount available
•
UL listed 1598, cUL or CSA. Damp
Location standard
Ordering Information
p2
Model
P2 High
Efficiency
Static
Parabolic
–
–
Ceiling Type
No. of lamps
1
2
3
4
One
Two
Three
Four
See Product Availability
table below.
Size
94 9" × 4'
14 1' × 4'
22 2' × 2'
24 2' × 4'
G
F
M
SM
Grid
Overlap Flange
Modular Fit-in Trim
Surface Mount
(Static only)
Lamp type
17 2', T8: 17 Watt
28 4', T5: 28 Watt
31U1 U-Bent, 1⅝" Leg
32
32U6
40TT
54
–
Spacing T8: 31 Watt
4', T8: 32, 30, 28 or
25 Watt
U-Bent, 6" Leg Spacing
T8: 32 Watt
Twin Tube Compact,
2G11 Base: 40 Watt
4', T5HO: 54 or 51 Watt
CELLS WIDE BY
CELLS LONG
AIR
FUNCTIONS
S Static
H Heat Extract
See Product
Availability
table below.
Louver Finish
LD Low Iridescent
Semi-Specular (Std.)
LS Low Iridescent
Specular
MA Matte Anodized Low
Iridescent SemiSpecular Aluminum
–
AIR CONTROL
Blank None
D Extract
Dampers
Ballast
NOTE: See Technical Section for other
ballast options.
E Electronic T8, Instant Start
3E 3-Lamp Electronic T8, Instant Start
4E 4-Lamp Electronic T8, Instant Start
24E (1) 2-Lamp and (1) 4-Lamp
Electronic T8, Instant Start
EP Electronic T5 or T8, Programmed
Start
3EP 3-Lamp Electronic T5HO or T8,
Programmed Start
4EP 4-Lamp Electronic T5HO (N/A 347V)
or T8, Programmed Start
ETT Electronic Twin Tube, Instant Start
(Specify voltage)
–
Voltage
U 120V-277V
347 347V
Options
FO735 35K 75CRI T8 Lamps
Installed
FO835 35K 82CRI T8 Lamps
Installed
F5835 35K 85CRI T5 Lamps
Installed
Two Ballast Covers
3-Wire Flex
4-Wire Flex
Emergency Battery
Pack
GLR Fast Blow Fuse
GMF Slow Blow Fuse
MS9 Master/Satellite
w/9' Harness
PAF Paint After
Fabrication
For other options see pages
96-112.
2BC
C388
C488
EL
PRODUCT AVAILABILITY
5¾"
4¼"
24"
P224-2
5¾"
4¼"
24"
P224-3
5¾"
4¼"
24"
P224-4
20
NO. OF
LAMPS
LAMP TYPE
LOUVER CONFIGURATIONS
9" × 4'
1
2
28, 32, 54
28, 32, 54
1 × 10 (10)
1 × 10 (10)
1' × 4'
1
2
28, 32, 54
28, 32, 54
1 × 8 (8)
1 × 8 (8)
2' × 2'
2
3
17, 31U1, 32U6, 40TT
17, 31U1, 40TT
3 × 3 (9), 4 × 4 (16)
3 × 3 (9), 4 × 4 (16)
2' × 4'
2
3
4
28, 32, 54
28, 32, 54
28, 32, 54
2 × 6 (12), 2 × 8 (16), 4 × 6 (24), 4 × 8 (32)
3 × 6 (18), 3 × 8 (24), 4 × 6 (24)
2 × 6 (12), 2 × 8 (16), 4 × 6 (24), 4 × 8 (32)
SIZE
Standard louver configurations shown in bold. For other lamp or louver
configurations, contact your local Columbia Lighting representative. Various
options may increase fixture height on 2' × 2' units. Contact your Columbia Lighting
representative if plenum depth is a concern.
P4
Recessed Air Handling Parabolic
Features
3" deep cell parabolic louver for
optimum control
•
IES standard RP-1 glare control models
available
Treated with a five stage phosphate
bonding process and finished with a
baked white enamel
•
•
•
Wide light distribution provides uniform
illumination
Mechanical light trap prevents light
leaks
•
Surface mount available
•
UL listed 1598, cUL or CSA. Damp
Location standard
•
Black reveal with full air handling
capabilities
•
Anodized low iridescent aluminum
louver
PA R A B O L I C S
•
Ordering Information
P4
–
Model
P4 Recessed
Air
Handling
Parabolic
–
No. of lamps
Ceiling Type
G Grid
F Overlap Flange
M Modular Fit-in
1
2
3
4
One
Two
Three
Four
See Product Availability
table below.
Trim
32
32U6
40TT
54
CELLS WIDE BY
CELLS LONG
See Product
Availability
table below.
SM Surface Mount
(Static only)
SG Slot Grid
Lamp type
17 2', T8: 17 Watt
28 4', T5: 28 Watt
31U1 U-Bent, 1⅝"
Size
14 1' × 4'
22 2' × 2'
24 2' × 4'
–
Leg Spacing T8:
31 Watt
4', T8: 32, 30,
28 or 25 Watt
U-Bent, 6" Leg
Spacing T8: 32
Watt
Twin Tube
Compact, 2G11
Base: 40 Watt
4', T5HO: 54 or
51 Watt
Louver Finish
GW Gloss White Enamel
LD Low Iridescent
Semi-Specular
LS Low Iridescent
Specular
MA Matte Anodized
Low Iridescent
Semi-Specular
Aluminum
AIR
FUNCTIONS
S Static
A Air Handling
C Combination
Supply/Extract
H Heat Extract
NO. OF
LAMPS
LAMP TYPE
–
Air control
Blank None
V Supply Vanes
D Extract Dampers
VD Vanes & Dampers
Voltage
U 120V-277V
347 347V
Options
FO735 35K 75CRI T8 Lamps
For information about air
handling and controls see
page 103.
F0741 41K 75CRI T8 Lamps
Installed
Installed
FO835 35K 82CRI T8 Lamps
Ballast
Installed
NOTE: See Technical Section for
other ballast options.
E Electronic T8, Instant
Start
3E 3-Lamp Electronic T8,
Instant Start
4E 4-Lamp Electronic T8,
Instant Start
EP Electronic T5 or T8,
Programmed Start
3EP 3-Lamp Electronic T5HO
or T8, Programmed Start
4EP 4-Lamp Electronic
T5HO (N/A 347V) or T8,
Programmed Start
ETT Electronic Twin Tube,
Instant Start (Specify
voltage)
ELW Electronic T8, 0.77
Ballast Factor, Low
Wattage, Instant Start
3ELW 3-lamp Electronic T8,
0.77 Ballast Factor, Low
Wattage, Instant Start
F5835 35K 85CRI T5 Lamps
Installed
Two Ballast Covers
3-Wire Flex
4-Wire Flex
Emergency Battery
Pack
GLR Fast Blow Fuse
GMF Slow Blow Fuse
M4R 95% Reflective
Specular Aluminum
Insert
MS9 Master/Satellite w/9'
Harness
PAF Paint After Fabrication
SRA Specular Anodized
Aluminum Reflector
NYC NYC Compliant
NYCU NYC Compliant, Union
Label
For other options see pages
96-112.
2BC
C388
C488
EL
10½"
PRODUCT AVAILABILITY
SIZE
–
LOUVER CONFIGURATIONS
1' × 4'
1
2
28, 32, 54
28, 32, 54
1 × 6 (6), 1 × 8 (8), 1 × 9 (9), 2 × 6 (12), 2 × 8 (16)
1 × 6 (6), 1 × 8 (8), 1 × 9 (9), 2 × 6 (12), 2 × 8 (16)
2' × 2'
2
3
17, 31U1, 32U6, 40TT
17, 31U1, 40TT
3 × 3 (9), 4 × 4 (16)
3 × 3 (9), 4 × 4 (16)
2' × 4'
2
3
4
28, 32, 54
28, 32, 54
28, 32, 54
2 × 6 (12), 2 × 8 (16), 4 × 6 (24), 4 × 8 (32)
3 × 6 (18), 3 × 8 (24)
2 × 6 (12), 2 × 8 (16), 4 × 6 (24), 4 × 8 (32)
Standard louver configurations shown in bold. For other lamp or louver configurations,
contact your local Columbia Lighting representative. Various options may increase fixture
height on 2' × 2' units. Contact your Columbia Lighting representative if plenum depth is a
concern.
5¾"
4"
24"
P424-2
14¼"
5¾"
4"
24"
P424-3
16¼"
5½"
5¾"
4"
24"
P424-4
21
P4 Small Cell
Recessed Air Handling Small Cell Parabolic
PA R A B O L I C S
Features
•
11/2" deep small cell louver reduces glare
•
•
Proper lamp position ensures uniform
illumination
Mechanical light trap prevents light
leaks
•
Surface mount available
•
UL listed 1598, cUL or CSA. Damp
Location standard
•
Black reveal with full air handling
capabilities
•
Anodized low iridescent aluminum
louver
•
Treated with a five stage phosphate
bonding process and finished with a
baked white enamel
Ordering Information
P4
–
Model
P4 Recessed Air
Handling
Small Cell
Parabolic
–
No. of lamps
2 Two
3 Three
4 Four
See Product
Availability
table below.
–
Ceiling Type
G Grid
F Overlap Flange
M Modular Fit-in
Trim
CELLS WIDE BY
CELLS LONG
See Product
Availability table
below.
SG Slot Grid
SM Surface Mount
Lamp type
17 2', T8: 17 Watt
28 4', T5: 28 Watt
31U1 U-Bent, 15/8"
32
32U6
40TT
54
Leg Spacing T8:
31 Watt
4', T8: 32, 30,
28 or 25 Watt
U-Bent, 6" Leg
Spacing T8: 32
Watt
Twin Tube
Compact, 2G11
Base: 40 Watt
4', T5HO: 54 or
51 Watt
Louver Finish
LD Low Iridescent
Semi-Specular
LS Low Iridescent
Specular
MA Matte Anodized
Low Iridescent
Semi-Specular
Aluminum
4¼"
24"
P424-3
4¼"
24"
P424-2
P424-4
22
AIR
FUNCTIONS
S Static
A Air Handling
C Combination
Supply/Extract
H Heat Extract
Ballast
NOTE: See Technical Section for other
ballast options.
E Electronic T8, Instant Start
3E 3-Lamp Electronic T8, Instant
Start
4E 4-Lamp Electronic T8, Instant
Start
EP Electronic T5 or T8,
Programmed Start
3EP 3-Lamp Electronic T5HO or
T8, Programmed Start
4EP 4-Lamp Electronic T5HO (N/A
347V) or T8, Programmed
Start
ETT Electronic Twin Tube, Instant
Start (Specify voltage)
ELW Electronic T8, 0.77 Ballast
Factor, Low Wattage, Instant
Start
3ELW 3-lamp Electronic T8, 0.77
Ballast Factor, Low Wattage,
Instant Start
Options
FO735 35K 75CRI T8
Lamps Installed
F0741 41K 75CRI T8 Lamp
Installed
FO835 35K 82CRI T8
Lamps Installed
F0841 41K 82CRI T8
Lamps Installed
F5835 35K 85CRI T5
Lamps Installed
C388 3-Wire Flex
C488 4-Wire Flex
EL Emergency Battery
Pack
GLR Fast Blow Fuse
GMF Slow Blow Fuse
MS9 Master/Satellite
w/9' Harness
PAF Paint After
Fabrication
NYC NYC Compliant
NYCU NYC Compliant,
Union Label
For other options see pages
96-112.
NO. OF
LAMPS
LAMP TYPE
LOUVER CONFIGURATIONS
2' × 2'
2
3
17, 31U1, 32U6, 40TT
17, 31U1, 40TT
6 × 6 (36), 7 × 7 (49)
6 × 6 (36), 7 × 7 (49)
2' × 4'
2
3
4
28, 32, 54
28, 32, 54
28, 32, 54
6 × 13 (78), 7 × 15 (105)
6 × 13 (78), 7 × 15 (105)
6 × 13 (78), 7 × 15 (105)
SIZE
5¾"
Voltage
U 120V-277V
347 347V
PRODUCT AVAILABILITY
16¼"
5¾"
Air control
Blank None
V Supply Vanes
D Extract Dampers
VD Vanes & Dampers
–
For information about air
handling and controls see
page 103.
(Static only)
Size
14 1' × 4'
22 2' × 2'
24 2' × 4'
–
For other lamp or louver configurations, contact your local Columbia Lighting
representative. Various options may increase fixture height on 2' × 2' units.
Contact your Columbia Lighting representative if plenum depth is a concern.
P4D
High Performance Parabolic
Features
Nominal 3" deep louver
•
Shallow housing
•
Black reveal with full air handling
capabilities
•
Lightweight
•
UL listed 1598, cUL or CSA. Damp
Location standard
•
Matte anodized low iridescent, semispecular (MA) louver finish virtually
eliminates visibility of fingerprints and
construction dust
PA R A B O L I C S
•
Ordering Information
P4D
G
–
Model
P4D High
Performance
Parabolic
No. of lamps
2 Two
3 Three
4 Four (N/A in
2×2)
See Product
Availability
table below.
Size
22 2' × 2'3
24 2' × 4'
Ceiling Type
G Grid
For hard ceilings, use
flange kit. See options
on page 105-106.
Lamp type
17 2', T8: 17 Watt
28 4', T5: 28 Watt
31U1 U-Bent, 15/8"
32
32U6
40TT
54
–
Leg Spacing T8:
31 Watt
4', T8: 32, 30,
28 or 25 Watt
U-Bent, 6" Leg
Spacing T8: 32
Watt
Twin Tube
Compact, 2G11
Base: 40 Watt
4', T5HO: 54 or
51 Watt
Louver Finish
LS Low Iridescent
Specular
MA Matte Anodized
Low Iridescent
Semi-Specular
Aluminum (Std.)
–
–
CELLS WIDE BY
CELLS LONG
Ballast
See Product
Availability table
below.
AIR Handling
S Static1
A Air Handling1
AV Air Handling with
1
Supply Vanes
C Combination
Supply/Extract2
CV Combination
CD
CVD
H
HD
–
Supply Vanes/
Extract2
Combination
Supply Extract
Dampers2
Combination
Supply Vanes
Extract Dampers2
Heat Extract2
Heat Extract with
Dampers2
1
All fixtures supplied with integral T-Bar clips.
2' × 2' fixtures supplied with integral T-Bar clips, 2' × 4'
fixtures supplied with two non-integral T-Bar clips.
3
Various options may increase fixture height on 2' × 2'.
2
NOTE: See Technical Section for
other ballast options.
E Electronic T8, Instant
Start
3E 3-Lamp Electronic T8,
Instant Start
4E 4-Lamp Electronic T8,
Instant Start
EP Electronic T5 or T8,
Programmed Start
3EP 3-Lamp Electronic T5HO
or T8, Programmed Start
4EP 4-Lamp Electronic
T5HO (N/A 347V) or T8,
Programmed Start
24E 2 or 4-Lamp Electronic
T8, Instant Start (For
3-Lamp Master/Satellite
only)
ELW 2-Lamp Electronic T8,
0.77 Ballast Factor, Low
Wattage, Instant Start
3ELW 3-Lamp Electronic T8,
0.77 Ballast Factor, Low
Wattage, Instant Start
4ELW 4-Lamp Electronic T8,
0.77 Ballast Factor, Low
Wattage, Instant Start
ETT Electronic Twin Tube,
Instant Start (Specify
voltage)
Voltage
U 120V-277V
347 347V
Options
FO735 35K 75CRI T8 Lamps
Installed
FO741 41K 75CRI T8 Lamps
Installed
FO835 35K 82CRI T8 Lamps
Installed
F0841 41K 82CRI T8 Lamps
Installed
F5835 35K 85CRI T5 Lamps
Installed
Two Ballast Covers
3-Wire Flex
4-Wire Flex
Emergency Battery Pack
Fast Blow Fuse
Slow Blow Fuse
Master/Satellite w/9'
Harness
MS11 Master/Satellite w/ 11'
Harness
PAF Paint After Fabrication
TB4 (4) Bulk T-Bar Clips
For other options see pages
96-112.
2BC
C388
C488
EL
GLR
GMF
MS9
PRODUCT AVAILABILITY
NO. OF
LAMPS
LAMP TYPE
LOUVER CONFIGURATIONS
2' × 2'
2
3
4
17, 31U1, 32U6, 34U6, 40TT
17, 31U1, 40TT
17
3 × 3 (9), 4 × 4 (16)
3 × 3 (9), 4 × 4 (16)
3 × 3 (9), 4 × 4 (16)
2' × 4'
2
3
4
28, 32, 34, 54
28, 32, 34, 54
28, 32, 34, 54
2 × 6 (12), 2 × 8 (16), 4 × 6 (24), 4 × 8 (32)
3 × 6 (18), 3 × 8 (24)
2 × 6 (12), 2 × 8 (16), 4 × 6 (24), 4 × 8 (32)
SIZE
Standard louver configurations shown in bold.
513/16"
313/16"
24"
P4D22-2
1315/16"
47/8"
31/2"
24"
P4D24-3
23
NP
Narrow Parabolic
PA R A B O L I C S
Features
•
6" aperture suits a variety of
applications
•
Shielding options include parabolic
louver, cross baffle or lens
•
Continuous louver provides a sleek
unbroken appearance in continuous row
applications
•
UL listed 1598, cUL or CSA. Damp
Location standard
•
Available with flush or regressed trim
•
One or two-lamp cross sections
Ordering Information
NP
–
Model
NP Narrow
Parabolic
–
6" × 2'
6" × 3'
6" × 4'
6" × 6'
6" × 8'
Lamp Type
17
25
28
32
–
–
Trim Type
FS Flush Steel Trim (G only)
FA Flush Trim (N/A Grid Trim)
RA 13/4" Regressed Trim
No. of Lamps
1 One
2 Two
SIZE
62
63
64
66
68
–
2', T8: 17 Watt
3', T8: 25 Watt
4', T5: 28 Watt
4', T8: 32, 30,
28 or 35 Watt
54 4', T5HO: 54 or
51 Watt
Ceiling Type
G Grid (For 1"
Voltage
U 120V-277V
347 347V
Shielding
LD Low Iridescent Semi-
inverted T-Bar)
F Overlap Flange
Trim (For hard
ceilings order
accessory yoke
hangers)
GT Integral Cross-tee
LS
WCB
A12
A19
OA
–
Ballast
Specular Parabolic
Louver
Low Iridescent Specular
Parabolic Louver
White Cross Baffle
Pattern 12 Acrylic Lens
Pattern 19 Acrylic Lens,
0.156" Nominal
Opal Acrylic Lens
NOTE: See Technical
Section for other ballast
options.
E Electronic T8,
Instant Start
3E 3-Lamp Electronic
T8, Instant Start
4E 4-Lamp Electronic
T8, Instant Start
EP Electronic T5 or T8,
Programmed Start
3EP 3-Lamp Electronic
T5HO or T8,
Programmed Start
4EP 4-Lamp Electronic
T5HO (N/A 347V)
or T8, Programmed
Start
Options
EL
GLR
GMF
NYC
NYCU
Emergency Battery Pack
Fast Blow Fuse
Slow Blow Fuse
NYC Compliant
NYC Compliant, Union
Label
Row Configuration
SGL Single (Cross tee
installations only)
EORRH End-of-Row Right
Hand* (No cross-tees
between housing)
EORLH End-of-Row Left
Hand* (No cross-tees
between housing)
INT Intermediate*
(No cross-tees
between housing)
*Integral in-row wiring. Single
circuit standard.
Accessories
(Order Separately)
116281 Yoke Hanger (Pair) One
Per (“F”) Trim Fixture
Type GT Integral cross-tee. Grid end lay into standard
T-Bar. Sides act as integral cross-tee to support tile. Fits
standard 1" wide, 1½" tall tee. Cut ceiling tile into two
8⅞" strips.
Type F For hard ceiling applications. Yoke hangers are shipped
separately. Carrier channel by others.
7¼" I.D. Carr. Chan.
Type G Lay-in exposed grid. Fit standards 1"
wide, 1½" tall tee.
7¼" I.D. Carr. Chan.
6"
Flush Grid
6"
6"
7¾"
5½" Max.
3" Min.
6" R.O.
End View
Nominal
Side View
6" R.O.
6⅜" O.A. Trim
Flush Flange
6" C-C Tees
7⅛" Max.
4¾" Min.
5¾"
6" R.O.
6⅞" O.A. Trim
Regressed Flange
7¾"
Regressed Grid
7" C-C Tees
24
VHC
Low Glare 9" Parabolic
Features
Meets IES standard RP-1 glare control
recommendations
•
White powder coat finished painted after
fabrication
•
Ideal for today’s computer intensive
offices
•
Surface and pendant mount available
•
Wide light distribution provides uniform
illumination
Symmetric and asymmetric distribution
•
•
•
Unique optical system eliminates glare
UL listed 1598, cUL or CSA. Damp
Location standard
•
Low iridescent anodized aluminum
louver and reflector
PA R A B O L I C S
•
Ordering Information
94
Model
VHC Standard
VHC
PVHC 55 degree
Cutoff VHC
–
–
Louver Finish
LS Low
No. of lamps
1 One
2 Two1
Iridescent
Specular
See Product Availability
table below.
Size
94 9" × 4'
Lamp type
28 4', T5: 28 Watt
32 4', T8: 32, 30,
28 or 25 Watt
54 4', T5HO: 54 or
51 Watt
LS
Ceiling Type
GT Integral Cross-tee
F Overlap Flange
G Lay-in (GT is typically
–
–
CELLS WIDE BY
CELLS LONG
See Product
Availability table
below.
Air Function
S Static
H Heat Extract
(No dampers)
recommended)
SM Surface Mount
–
Voltage
U 120V-277V
347 347V
Distribution Options
Blank Symmetric Distribution
1WW Asymmetric Wall Wash
2WW Double Wall Wash
Ballast
NOTE: See Technical Section for
other ballast options.
E Electronic T8, Instant Start
EP Electronic T5 or T8,
Programmed Start
–
Options
FO735
FO835
F5835
EL
GLR
GMF
MSEE
NYC
NYCU
35K 75CRI T8 Lamps Installed
35K 82CRI T8 Lamps Installed
35K 85CRI T5 Lamps Installed
Emergency Battery Pack
Fast Blow Fuse
Slow Blow Fuse
Master/Satellite End-to-End
NYC Compliant
NYC Compliant, Union Label
For other options see pages 96-112.
1
VHC only.
PRODUCT AVAILABILITY
MODEL
SIZE
NO. OF LAMPS
LAMP TYPE
LOUVER CONFIGURATIONS
VHC
9" × 4'
1
2
28, 32, 54
28, 32, 54
1 × 13 (13)
1 × 13 (13)
PVHC
9" × 4'
1
28, 32, 54
1 × 15 (15)
Type GT Integral cross-tee. Grid ends lay into standard T-Bar. Sides act as
integral cross tees to support tile. Fits standard 1" wide, 11/2" tall tee. Cut
ceiling tiles into two 73/8" strips.
6¼"
6¼"
8¾"
8¾"
9½"
9½"
VHC94-1 GT
VHC94-2 GT
25
HC
Low Glare Parabolic
PA R A B O L I C S
Features
•
Meets IES standard RP-1 glare control
recommendations
•
Low iridescent anodized aluminum
louver and reflector
•
Ideal for today’s computer intensive
offices
•
Surface and pendant mount available
•
•
Wide light distribution provides uniform
illumination
Mechanical light trap prevents light
leaks
•
•
Unique optical system eliminates glare
Black reveal with full air handling
capabilities
•
Treated with a five-stage phosphate
bonding process and finished with a
baked white enamel
•
UL listed 1598, cUL or CSA. Damp
Location standard
Ordering Information
HC
–
Model
HC Low Glare
–
No. of lamps
1 One
2 Two
3 Three
Parabolic
See Product Availability
table below.
Size
14 1' × 4'
22 2' × 2'
24 2' × 4'
Lamp type
28 4', T5: 28 Watt
31U1 U-Bent, 15/8"
32
32U6
40TT
54
Leg Spacing T8:
31 Watt
4', T8: 32, 30,
28 or 25 Watt
U-Bent, 6" Leg
Spacing T8: 32
Watt
Twin Tube
Compact, 2G11
Base: 40 Watt
4', T5HO: 54 or
51 Watt
–
Ceiling Type
–
CELLS WIDE BY
CELLS LONG
G
F
M
SG
SM
Grid
Overlap Flange
Modular Fit-in Trim
Slot Grid
Surface Mount*
*See limitations under
Product Availability in
the Product Selection
Guide.
AIR CONTROL
Blank None
V Supply Vanes
D Extract
See Product
Availability table
below.
Louver Finish
LD Low Iridescent
Semi-Specular (Std.)
See Product Availability table
below.
Lamps Installed
Lamps Installed
C388 3-Wire Flex
C488 4-Wire Flex
EL Emergency
NOTE: See Technical Section for other ballast options.
E Electronic T8, Instant Start
Battery Pack
3E 3-Lamp Electronic T8, Instant Start
GLR Fast Blow Fuse
4E 4-Lamp Electronic T8, Instant Start
GMF Slow Blow Fuse
24E (1) 2-Lamp and (1) 4-Lamp Electronic T8,
MS9 Master/Satellite
Instant Start
w/9' Harness
EP Electronic T5 or T8, Programmed Start
PAF Paint After
Fabrication
3EP 3-Lamp Electronic T5HO or T8, Programmed
Start
NYC NYC Compliant
4EP 4-Lamp Electronic T5HO (N/A 347V) or T8,
NYCU NYC Compliant,
Programmed Start
Union Label
ETT Electronic Twin Tube, Instant Start (Specify
For other options see pages
voltage)
96-112.
PRODUCT AVAILABILITY
24"
NO. OF
LAMPS
LAMP TYPE
LOUVER
CONFIGURATIONS
LOUVER FINISH
1' × 4'
1
2
28, 32, 54
28, 32, 54
1 × 12 (12)
1 × 12 (12)
LD, LS
LD, LS
12"
2' × 2'
2
2*
2*
3
31U1, 40TT
40TT
32U6
31U1, 40TT
2 × 4 (8)
3 × 4 (12)
3 × 4 (12)
3 × 4 (12)
LD, LS
LD, LS
LD, LS
LD, LS
2' × 4'
2
3
28, 32, 54
28, 32, 54
2 × 9 (18)
3 × 9 (27)
LD, LS
LD, LS
HC14-2 12 Cell
26
Lamps Installed
F5835 35K 85CRI T5
Ballast
LS Low Iridescent Specular
Options
FO735 35K 75CRI T8
FO835 35K 82CRI T8
Supply/Extract
SIZE
24"
Dampers
For information
about air handling
and controls, see
page 103.
H Heat Extract
7"
HC24-2 18 Cell
Voltage
U 120V-277V
347 347V
Dampers
Air Function
S Static
A Air Handling
C Combination
1"
611⁄16"
–
VD Vanes &
6"
HC24-3 27 Cell
–
If desired lamp or louver configuration is not shown above, contact
your local Columbia Lighting representative. PVHC meets RP-1
preferred standards. Various options may increase fixture height
on 2' × 2' units. Contact your Columbia Lighting representative if
plenum depth is a concern. Standard louver finish shown in bold.
*Not available in surface mount.
45
Recessed 4" Deep Cell Parabolic
Features
Meets IES standard RP-1 glare control
recommendations on most models
•
Mechanical light trap prevents light
leaks
•
Ideal for today’s computer intensive
offices
•
Black reveal with full air handling
capabilities
•
Wide light distribution provides uniform
illumination
•
UL listed 1598, cUL or CSA. Damp
Location standard
•
4" deep low iridescent anodized
aluminum louver
•
Surface mount available
PA R A B O L I C S
•
Ordering Information
45
–
Model
45 Recessed
4" Deep
Cell
Parabolic
Size
14
22
24
44
1' × 4'
2' × 2'
2' × 4'
–
Ceiling type
No. of lamps
G
F
M
SM
1
2
3
4
6
8
Grid
Overlap Flange
Modular Fit-in Trim
Surface Mount
(Static only)
SG Slot Grid
One
Two
Three
Four
Six
Eight
See Product Availability
table below.
Lamp type
17 2', T8: 17 Watt
28 4', T5: 28 Watt
31U1 U-Bent, 1⅝" Leg
4' × 4'
32
32U6
40TT
54
Spacing T8: 31 Watt
4', T8: 32, 30, 28 or
25 Watt
U-Bent, 6" Leg Spacing
T8: 32 Watt
Twin Tube Compact,
2G11 Base: 40 Watt
4', T5HO: 54 or 51 Watt
–
Cells wide by
cells long
See Product
Availability table
below.
Louver finish
LD Low Iridescent
LS Low Iridescent
Air function
S Static
A Air Handling
C Combination
MA Matte Anodized
H Heat Extract
Semi-Specular (Std.)
Specular
Low Iridescent SemiSpecular Aluminum
Supply/Extract
–
–
Air Control
V Supply Vanes
D Extract Dampers
VD Vanes &
–
Voltage
U 120V277V
347 347V
Dampers
Ballast
NOTE: See Technical Section for other
ballast options.
E Electronic T8, Instant Start
3E 3-Lamp Electronic T8, Instant
Start
4E 4-Lamp Electronic T8, Instant
Start
24E (1) 2-Lamp and (1) 4-Lamp
Electronic T8, Instant Start
EP Electronic T5 or T8,
Programmed Start
3EP 3-Lamp Electronic T5HO or T8,
Programmed Start
4EP 4-Lamp Electronic T5HO (N/A
347V) or T8, Programmed Start
3ETT 3-Lamp Electronic Twin Tube,
Instant Start (Specify voltage)
For a specific ballast vendor show as
option.
T8 Lamps
Installed
FO835 35K 82CRI
T8 Lamps
Installed
F5835 35K 85CRI
T5 Lamps
Installed
2BC Two Ballast
Covers
C388 3-Wire Flex
C488 4-Wire Flex
EL Emergency
Battery Pack
GLR Fast Blow
Fuse
GMF Slow Blow
Fuse
MS9 Master/
Satellite
w/9' Harness
PAF Paint After
Fabrication
NYC NYC
Compliant
NYCU NYC
Compliant,
Union Label
For other options see
pages 96-112.
1"
PRODUCT AVAILABILITY
NO. OF
LAMPS
LAMP TYPE
LOUVER CONFIGURATIONS
1' × 4'
1
2
28, 32, 54
28, 32, 54
1 × 6 (6), 1 × 9 (9)
1 × 6 (6), 1 × 9 (9)
2' × 2'
2
3
17, 31U1, 32U6, 40TT
17, 31U1, 40TT
3 × 3 (9), 4 × 4 (16)
3 × 3 (9), 4 × 4 (16)
2' × 4'
2
3
4
28, 32, 54
28, 32, 54
28, 32, 54
2 × 6 (12), 2 × 8 (16), 4 × 6 (24), 4 × 8 (32)
3 × 6 (18), 3 × 8 (24)
2 × 6 (12), 2 × 8 (16), 4 × 6 (24), 4 × 8 (32)
4' × 4'
6
8
28, 32, 54
28, 32, 54
6 × 6 (36), 8 × 8 (64)
6 × 6 (36), 8 × 8 (64)
SIZE
Options
FO735 35K 75CRI
Standard louver configurations shown in bold. For other lamp or louver configurations,
contact your local Columbia Lighting representative. Various options may increase
fixture height on 2' × 2' units. Contact your Columbia Lighting representative if plenum
depth is a concern.
6¾"
61⁄16"
24"
4524-2
6¾"
7"
12"
4514-2
61⁄16"
24"
4524-3
6¾"
61⁄16"
24"
4524-4
27
PW
Parawash Recessed Wall Wash
PA R A B O L I C S
Features
•
Wall washing makes an environment
appear larger and brighter
•
Anodized low iridescent aluminum
reflector
•
Wide light distribution provides uniform
illumination at up to 8' spacings
•
Ideal for office, retail, or video
conferencing
•
Models with unique kicker reflector
directs majority of light on wall up to
the ceiling line
•
White powder coat finish painted after
fabrication
•
•
Used at ends and sides of parabolic rows
UL listed 1598, cUL or CSA. Damp
Location standard
•
Choice of linear kicker reflector or cross
baffle
Ordering Information
PW
Model
PW Parawash
Recessed
Wall Wash
–
1
–
LD
Ceiling Type
G Grid
SG Slot Grid
SM Surface Mount
No. of lamps
1 One
See Product
Availability table
below.
–
–
Aperture
K Kicker
B Cross Baffle
Voltage
U 120V-277V
347 347V
Options
EL Emergency Battery
Pack
GLR Fast Blow Fuse
GMF Slow Blow Fuse
Lens Spread Lens (Twin
Tube Kicker unit only)
Size
81 8" × 1'
82 8" × 2'
84 8" × 4'
Lamp type
14 2', T5: 14 Watt
17 2', T8: 17 Watt
24 2', T5HO:
Reflector Finish
LD Low Iridescent SemiSpecular (Std.)
24 Watt
28 4', T5: 28 Watt
32 4', T8: 32, 30,
28 or 25 Watt
NYC NYC Compliant
NYCU NYC Compliant,
Ballast
Union Label
For other options see pages
96-112.
NOTE: See Technical Section for
other ballast options.
E Electronic T8, Instant Start
EP Electronic T5 or T8,
Programmed Start
ETT Electronic Twin Tube, Instant
Start (Specify voltage)
40TT Twin Tube
Compact, 2G11
Base: 40 Watt
54 4', T5HO: 54 or
51 Watt
Accessories
(Order Separately)
FK81 8" × 1' Flange Kit
FK82 8" × 2' Flange Kit
FK84 8" × 4' Flange Kit
PRODUCT AVAILABILITY
4"
4"
8"
Twin Tube with
Cross Baffle
28
8"
Twin Tube with Kicker
SIZE
NO. OF LAMPS IN
CROSS SECTION
NO. OF LAMPS IN
UNIT
8" × 2'
1
1
17, 40TT
1 × 9 (9)
8" × 4'
1
1
1
2
28, 32, 54
40TT
1 × 18 (18)
1 × 18 (18)
LAMP TYPE
CROSS BAFFLE
CONFIGURATIONS
If desired lamp or cross baffle configuration is not shown above, contact
your local Columbia Lighting representative.
FW
Fluorescent Wall Wash
Features
Wall wash luminaire
•
•
Directs majority of light to vertical
surface
Wireway completely accessible from
below
•
Brighter walls open up spaces, minimize
contrast ratios
Suitable for individual or continuous row
mounting
•
UL listed 1598, cUL or CSA. Damp
Location standard
•
•
Versatile and economical
•
Presents a clean, uninterrupted
reflecting surface
•
Contractor friendly
PA R A B O L I C S
•
Ordering Information
FW
–
Model
FW Fluorescent
–
No. of Lamps
1 One
2 Two (Not available
Wall Wash
Ceiling Type
G Grid
SM Surface
in Twin Tube)
See Product Availability
table below.
Mount
(For hard ceiling
use flange kit.)
–
–
Reflector Finish
MA Matte Anodized Low
Voltage
U 120V-277V
347 347V
Iridescent SemiSpecular Aluminum
MW Matte White
Options
EL Emergency
Battery Pack
GLR Fast Blow Fuse
GMF Slow Blow Fuse
MS9 Master/Satellite Pair
with 9' Harness
MSEE Master/Satellite
End-To-End
SIZE
102 10" × 2'
104 10" × 4'
Lamp Type
Ballast
2', T5: 14 Watt
2', T8: 17 Watt
2', T5HO: 24 Watt
4', T5: 28 Watt
4', T8: 32 Watt
Twin Tube Compact,
2G11 Base: 40 Watt
54 4', T5HO: 54 Watt
NOTE: See Technical Section for
other ballast options.
E Electronic T8, Instant Start
EP Electronic T5 or T8,
Programmed Start
ETT Electronic Twin Tube, Instant
Start (Specify voltage)
EPTT Electronic Twin Tube,
Programmed Start
14
17
24
28
32
40TT
NYC NYC Compliant
NYCU NYC Compliant,
Union Label
For other options see pages
96-112.
Accessories
(Order Separately)
FK102 Flange Adaptor for
Hard Ceilings,
2' Fixture
FK104 Flange Adaptor for
Hard Ceilings,
4' Fixture
PRODUCT AVAILABILITY
NO. OF LAMPS IN
CROSS SECTION
NO. OF LAMPS IN
UNIT
LAMP TYPE
HEIGHT
LENGTH
10" × 2'
1
2
1
2
14, 17, 24, 40TT
14, 17, 24
49/16"
49/16"
24"
24"
10" × 4'
1
1
2
1
2
2
28, 32, 54, 40TT
40TT
28, 32, 54
49/16"
49/16"
49/16"
48"
48"
48"
SIZE
49⁄16"
10"
FW Twin Tube
49⁄16"
10"
FW 2T8
29
VC
Videoconference Luminaire
PA R A B O L I C S
Features
•
Designed for videoconferencing, video
arraignments, remote classroom
applications, and conference rooms
•
Unique lens with elevating and depressing
prisms controls glare at critical angles,
shielding ships separately
•
Directional lens/baffle system throws
light onto vertical surfaces and
clearly illuminates facial features for
videoconferencing
•
Recessed unit maintains clean ceiling line
•
Uses T8 and T5 technology to integrate
easily with dimming and control systems
•
UL listed 1598, cUL or CSA. Damp Location
standard
•
Ships separately
•
Lamps orient to wash desired surface
•
1' × 4' size drops into standard T-Bar grid
system
Ordering Information
VC
–
Model
VC Videoconference
Luminaire
2
–
Lens
VCL Black Cross Baffle
No. of lamps
2 Two
With Unique CRT
Overlay
PVC Unique CRT
Overlay
See Product Availability
table below.
Length
12 1' × 2'
14 1' × 4'
Lamp type
17
28
32
54
–
Ballast
Voltage
U 120V-277V
347 347V
NOTE: See Technical Section
for other ballast options.
E Electronic T8, Instant
Start
ED Electronic Dimming
T5 or T8
EP Electronic T5 or T8,
Programmed Start
Options
C388 3-Wire Flex
C488 4-Wire Flex
GLR Fast Blow Fuse
GMF Slow Blow Fuse
NYC NYC Compliant
NYCU NYC Compliant,
Union Label
For other options see
pages 96-112.
2', T8: 17 Watt
4', T5: 28 Watt
4', T8: 32, 30, 28 or 25 Watt
4', T5HO: 54 or 51 Watt
PRODUCT AVAILABILITY
6"
48"
30
12"
VC12-2, VC14-2
SIZE
NO. OF LAMPS IN
CROSS SECTION
NO. OF LAMPS IN
UNIT
1' × 2'
2
1' × 4'
2
LAMP TYPE
WIDTH
LENGTH
HEIGHT
2
17
12"
24"
6"
2
28, 32, 54
12"
48"
6"
HH/HV
Recessed HID Parabolic
Features
Ideal for manufacturing areas, retail
stores, and gymnasiums
•
Black reveal with air handling
capabilities
•
Metal halide lamp
•
•
Horizontal or vertical lamp position
White powder coat finish, painted after
fabrication
•
Tempered glass overlay
•
•
Ballast accessible from below
Uses EISA compliant pulse start metal
halide technology
•
•
Ballast housing is made of aluminum for
maximum heat dissipation
UL listed 1598, cUL or CSA. Damp
Location standard
PA R A B O L I C S
•
Ordering Information
22
P
–
Model
HH Horizontal
–
Ceiling Type
F Flange
G Grid
Lamp type
P Pulse Start,
Lamp
Orientation
HV Vertical
Lamp
Orientation
Metal Halide
–
CELLS WIDE BY
CELLS LONG
See Product
Availability table
below.
–
–
Air Function
S Static
A Air Handling
–
Voltage
U 120V-277V
347 347V
480 480V
QT Quad-Tap,
120V, 208V,
240V, 277V
Lamp watts
175 175 Watt
200 200 Watt
250 250 Watt
320 320 Watt
350 350 Watt
400 400 Watt
Size
22 2' × 2'
Louver Finish
LD Low Iridescent
Air control
Blank None
V Supply Vanes
Semi-Specular
LS Low Iridescent
Specular
Options
GLR
QR
NYC
NYCU
Fast Blow Fuse
Quartz Restrike
NYC Compliant
NYC Compliant,
Union Label
For other options see
pages 96-112.
289∕16"
PRODUCT AVAILABILITY
SIZE
NO. OF LAMPS
LAMP TYPE
LAMP WATTAGE
LOUVER CONFIGURATIONS
2' × 2'
1
P
175, 250, 320, 400
3 × 3 (9), 4 × 4 (16)
289∕16"
If desired lamp or louver configuration is not shown above, contact your local
Columbia Lighting representative.
1625∕32"
11¾"
11¼"
24" C-C Tees
HH22
24" C-C Tees
HV22
31
4PS
Specification Grade Static Troffer
LENSED TROFFERS
Features
•
Excellent lamp-to-lens spacing
•
•
Flush door is formed steel with mitered
corners
Row mounting available. Must specify at
time of order
•
Painted parts are treated with a five
stage phosphate bonding process and
finished with a baked white enamel
•
UL listed 1598, cUL or CSA. Damp
Location standard
•
Hemmed or rolled edge housing
•
Steel corner hinges ensure a snug door
fit eliminating light leaks
•
Doors are retained by cam latches and
hinge from either side
•
Spring loaded latches optional
Ordering Information
4PS
–
Model
4PS Specification
Grade Static
Troffer
SIZE
14 1' × 4'
22 2' × 2'
24 2' × 4'
–
No. of Lamps
1
2
3
4
6
One
Two
Three (2×4 only)
Four (2×4 only)
Six (2x4 only)
See Product Availability
table below.
Ceiling type
G Inverted T-Bar
F Overlap Flange
M Modular
Door
FS
FA
RA
SFA
SRA
White Flush Steel
White Flush Aluminum
White Regressed Aluminum
Silver Flush Aluminum
Silver Regressed Aluminum
Lamp type
14 2', T5: 14 Watt
17 2', T8: 17 Watt
24
28
31U1
32
32U6
40TT
54
(2, 3, or 4 lamps)
2', T5HO: 24 Watt
4', T5: 28 Watt
U-Bent, 1⅝" Leg Spacing
T8: 31 Watt (2 or 3 lamps)
4', T8: 32, 30, 28 or 25 Watt
U-Bent, 6" Leg Spacing
T8: 32 Watt (2 lamps)
Twin Tube Compact, 2G11
Base: 40 Watt (2 or 3 lamps)
4', T5HO: 54 or 51 Watt
Shielding
A12 Pattern 12 Acrylic Lens
A12125 Pattern 12 Acrylic Lense,
0.125" Nominal
A15 Pattern 15 Acrylic Lens
A19 Pattern 19 Acrylic Lens,
0.156" Nominal
PC1 ½" × ½" × ½" Specular
Silver Polystyrene Louver
PC2 1½" × 1½" × 1" Specular
Silver Polystyrene Louver
For more shielding options see page 40.
Options
FO735 35K 75CRI T8 Lamps
Installed
F0741 41K 75 CRI T8 Lamps
Installed
F0835 35K 82CRI T8 Lamps
Installed
F0841 41K 82CRI T8 Lamps
NOTE: See Technical Section for other ballast
options.
E Electronic T8, Instant Start
3E 3-Lamp Electronic T8, Instant Start
4E 4-Lamp Electronic T8, Instant Start
EP Electronic T5 or T8, Programmed Start
3EP 3-Lamp Electronic T5HO or T8,
Programmed Start
4EP 4-Lamp Electronic T5HO (N/A 347V) or
T8, Programmed Start
ETT Electronic Twin Tube, Instant Start
ELW 2-Lamp Electronic T8, 0.77 Ballast
Factor, Low Wattage, Instant Start
3ELW 3-Lamp Electronic T8, 0.77 Ballast
Factor, Low Wattage, Instant Start
4ELW 4-Lamp Electronic T8, 0.77 Ballast
Factor, Low Wattage, Instant Start
EPTT Electronic Twin Tube, Programmed Start
Installed
F5835 35K 85CRI T5 Lamps
Installed
EL Emergency Battery
Pack
C388 3-Wire Flex
C488 4-Wire Flex
H Heat Extract
(No Dampers)
GLR Fast Blow Fuse
MS9 Master/Satellite Pair
w/9' Harness
SLL Spring Loaded Latches
NYC NYC Compliant
NYCU NYC Compliant, Union
Label
For more options see pages
96-112.
NO. OF
LAMPS
LAMP TYPE
GRID TRIM
HEIGHT*
FLANGE TRIM
HEIGHT*
1' × 4'
1
2
3
28, 32, 54
28, 32, 54
28, 32, 54
5⅜"
5⅜"
5⅜"
5⅜"
5⅜"
5⅜"
2' × 2'
2
3
4
14, 17, 24, 31U1, 32U6, 40TT
14, 17, 24, 31U1, 40TT
14, 17, 24
4¼"
4¼"
4¼"
*
*
*
2' × 4'
2
3
4
6
28, 32, 54
28, 32, 54
28, 32, 54
28, 32, 54
4¼"
4¼"
4¼"
4¼"
4½"
4½"
4½"
4½"
SIZE
4¼"
24"
4PS24-2
4¼"
24"
4PS24-3
4¼"
32
Voltage
U 120V-277V
347 347V
Product Availability
24"
4PS22-2
12"
4PS14-2
–
Ballast
4¼"
5⅜"
–
24"
4PS24-4
*Some ceiling types and options may increase height of 2' × 2' units.
Typically 4¼" high, some options may increase this to 6⅛". Please
contact your Columbia Lighting representative for details.
ST8
Low Profile Specification Troffer
Features
Optical performance designed for
T8 lamp technology
•
Snap-in ballast covers can be removed
when lamps are installed
•
2⅛" minimum spacing from bottom
of lamp to bottom of lens
•
Optional flush or regressed aluminum
door frames available
•
Mechanical light seal
•
•
Rolled fixture edges for comfortable
handling
UL listed 1598, cUL or CSA. Damp
Location standard
•
Spring loaded latches optional
•
Integral T-Bar clips (2' × 4' only)
LENSED TROFFERS
•
Ordering Information
ST8
–
Model
ST8 Low Profile
–
No. of Lamps
One
Two
Three
Four
Six
See Product Availability
table below.
SIZE
14 1' × 4'
22 2' × 2'
24 2' × 4'
28
32
32U6
40TT
54
A12
A12125
A19
PC1
Pattern 12 Acrylic Lens
Pattern 12 Acrylic Lens, 0.125" Nominal
Pattern 19 Acrylic Lens, 0.156" Nominal
½" × ½" × ½" Specular Silver
Polystyrene Louver
PC2 1½" × 1½" × 1" Specular Silver
Polystyrene Louver
For more shielding options see page 40.
(1×4 only)
Lamp type
14
17
24
31U1
Shielding
Ceiling type
G Inverted T-Bar
F Overlap Flange
1
2
3
4
6
Specification
Troffer
–
2', T5: 14 Watt
2', T8: 17 Watt
2', T5HO: 24 Watt
U-Bent, 1⅝" Leg Spacing
T8: 31 Watt (2 or 3 lamps)
4', T5: 28 Watt
4', T8: 32, 30, 28 or 25 Watt
U-Bent, 6" Leg Spacing
T8: 32 Watt (2 lamps)
Twin Tube Compact, 2G11
Base: 40 Watt (2 or 3 lamps)
4', T5HO: 54 or 51 Watt
NO. OF
LAMPS
LAMP TYPE
GRID TRIM
HEIGHT
1' × 4'
1
2
3
32
28, 32, 54
32
4⅞"
4¼"
4⅞"
2' × 2'
2
3
4
14, 17, 31U1, 32U6, 40TT
14, 17, 31U1, 40TT
14, 17
4¼"
4¼"
4¼"
2
3
4
6
28, 32, 54
28, 32, 54
28, 32, 54
28, 32, 54
3¾"
3¾"
3¾"
3¾"
2' × 4'
Voltage
U 120V-277V
347 347V
Options
FO735 35K 75CRI T8
Lamps Installed
F0741 41K 75CRI T8
Lamps Installed
F0835 35K 82CRI T8
Lamps Installed
Door
Ballast
FS White Flush Steel
FA White Flush Aluminum
RA White Regressed
NOTE: See Technical Section for other ballast
options.
E Electronic T8, Instant Start
3E 3-Lamp Electronic T8, Instant Start
4E 4-Lamp Electronic T8, Instant Start
EP Electronic T5 or T8, Programmed Start
3EP 3-Lamp Electronic T5HO or T8,
Programmed Start
4EP 4-Lamp Electronic T5HO
(N/A 347V) or T8, Programmed Start
ELW 2-Lamp Electronic T8, 0.77 Ballast
Factor, Low Wattage, Instant Start
3ELW 3-Lamp Electronic T8, 0.77 Ballast
Factor, Low Wattage, Instant Start
4ELW 4-Lamp Electronic T8, 0.77 Ballast
Factor, Low Wattage, Instant Start
24E 2 or 4-Lamp Electronic T8, Instant
Start (For 3-Lamp Master/Satelite
only)
EPTT Electronic Twin Tube, Programmed
Start
Aluminum
PS Premium Steel
Product Availability
SIZE
–
F0841 41K 82CRI T8
Lamps Installed
EL Emergency
Battery Pack
GLR Fast Blow Fuse
MS9 Master/Satellite
Pair w/9' Harness
MS11 Master/Satellite
Pair w/ 11'
Harness
C388 3-Wire Flex
C488 4-Wire Flex
PAF Paint After
Fabrication
SLL Spring Loaded
Latches
NYC NYC Compliant
NYCU NYC Compliant,
Union Label
For more options see pages
96-112.
4¼"
4¼"
12"
ST814-2
24"
ST822-2
3¾"
3¾"
24"
ST824-3
24"
ST824-2
13¾"
5½"
3¾"
2⅛"
24"
ST824-4
33
JT8
Dedicated T8 Lensed Troffer
LENSED TROFFERS
Features
•
Optimized for T8 lamps
•
Housing reinforced with embossments
•
Flush steel door (standard) hinges from
either side for maximum flexibility
•
•
Mitered corners standard
Painted parts are treated with a five
stage phosphate bonding process and
finished with a backed white enamel
•
Hemmed edges on 2' × 4' for contractorfriendly handling
•
UL listed 1598, cUL or CSA. Damp
Location standard
•
Mechanical light trap prevents light leak
without foam gasketing
•
Integral T-Bar clips (2' × 4' only)
Ordering Information
JT8
G
–
Model
JT8 Dedicated
No. of Lamps
2 Two
3 Three
4 Four (2 × 4 only)
T8 Lensed
Troffer
–
–
Ceiling type
G Inverted T-Bar
0.125" Nominal
A19 Pattern 19 Acrylic Lens,
0.156" Nominal
PC1 ½" × ½" × ½" Specular
Silver Polystyrene Louver
For more shielding options see page 40.
Lamp type
Door
17 2', T8: 17 Watt (2, 3, or
31U1
32
32U6
40TT
Voltage
U 120V-277V
347 347V
Shielding
A12 Pattern 12 Acrylic Lens (Std.)
A12125 Pattern 12 Acrylic Lens,
See Product Availability
table below.
SIZE
22 2' × 2'
24 2' × 4'
–
4 lamps)
U-Bent, 1⅝" Leg
Spacing T8: 31 Watt (2
or 3 lamps)
4', T8: 32, 30, 28 or
25 Watt
U-Bent, 6" Leg
Spacing
T8: 32 Watt (2 lamps)
Twin Tube Compact,
2G11 Base: 40 Watt (2
or 3 lamps)
FS White Flush Steel
FA White Flush
Aluminum
For more door options
contact factory.
Options
FO735 35K 75CRI T8
Lamps Installed
FO741 41K 75CRI T8
Lamps Installed
F0835 35K 82CRI T8
Lamps Installed
FO841 41K 82 CRI T8
Lamps Installed
EL Emergency
Battery Pack
Ballast
GLR Fast Blow Fuse
MS9 Master/Satellite
NOTE: See Technical Section for other ballast
options.
E Electronic T8, Instant Start
3E 3-Lamp Electronic T8, Instant Start
4E 4-Lamp Electronic T8, Instant Start (17W
lamps only)
24E (1) 2-Lamp & (1) 4-Lamp Electronic T8,
Instant Start (For use with MS9)
EP Electronic T8, Programmed Start
3EP 3-Lamp Electronic T8, Programmed Start
4EP 4-Lamp Electronic T8, Programmed Start
ELW 2-Lamp Electronic T8, 0.77 Ballast Factor,
Low Wattage, Instant Start
3ELW 3-Lamp Electronic T8, 0.77 Ballast Factor,
Low Wattage, Instant Start
4ELW 4-Lamp Electronic T8, 0.77 Ballast Factor,
Low Wattage, Instant Start
EPTT Electronic Twin Tube, Programmed Start
w/9' Harness
MS11 Master/Satellite
w/ 11' Harness
C388 3-Wire Flex
C488 4-Wire Flex
PAF Paint After
Fabrication
SRA Specular
Reflector
For more options see
pages 96-112.
Product Availability
3⅛"
4¼"
24"
JT822-2
24"
JT824-3
3⅛"
3⅛"
24"
JT824-2
34
24"
JT824-4
NO. OF
LAMPS
LAMP TYPE
GRID TRIM
HEIGHT
2' × 2'
2
3
4
17, 31U1, 32U6, 40TT
17, 31U1, 40TT
17
4¼"
4¼"
4¼"
2' × 4'
2
3
4
32
32
32
3⅛"
3⅛"
3⅛"
SIZE
WT
Wet Location Lensed Troffer
Features
Wet label shallow housing troffer
•
•
Gasketed to provide additional seal
between door, lens, and housing
Metal parts are white powder coat,
painted after fabrication
•
UL listed 1598, cUL or CSA. Wet Location
standard
•
Mitered corners standard on door frame
•
Rolled or hemmed housing edges
•
Mechanical light trap
LENSED TROFFERS
•
Ordering Information
WT
–
Model
WT Wet Location
No. of Lamps
1
2
3
4
6
One
Two
Three
Four
Six
See Product Availability
table below.
Lensed
Troffer
SIZE
14 1' × 4'
22 2' × 2'
24 2' × 4'
–
–
Ceiling type
G Inverted T-Bar
F Overlap Flange
Shielding
A12 Pattern 12 Acrylic Lens
A12125 Pattern 12 Acrylic Lens,
32
32U6
40TT
54
0.156" Nominal
DR12 Pattern 12 Acrylic Lens,
Impact Resistant, 0.140"
For more shielding options see
page 40.
2', T5: 14 Watt
2', T8: 17 Watt
2', T5HO: 24 Watt
4', T5: 28 Watt
U-Bent, 1⅝" Leg
Spacing T8: 31 Watt
4', T8: 32, 30, 28 or
25 Watt
U-Bent, 6" Leg Spacing
T8: 32 Watt
Twin Tube Compact,
2G11 Base: 40 Watt
4', T5HO: 54 or 51 Watt
Door
FA White Flush
Aluminum
RA White
Regressed
Aluminum
Product Availability
LAMP TYPE
GRID TRIM
HEIGHT
1' × 4'
1
2
3
32
28, 32, 54
32
4⅞"
4¼"
4⅞"
2' × 2'
2
3
4
14, 17, 24, 31U1, 32U6, 40TT
14, 17, 24, 31U1, 40TT
14, 17, 24
4¼"
4¼"
4¼"
2
3
4
6
28, 32, 54
28, 32, 54
28, 32, 54
28, 32, 54
3¾"
3¾"
3¾"
3¾"
2' × 4'
Ballast
NOTE: See Technical Section for other ballast
options.
E Electronic T8, Instant Start
3E 3-lamp Electronic T8, Instant Start
4E 4-Lamp Electronic T8, Instant Start
24E (1) 2-Lamp and (1) 4-Lamp
Electronic T8, Instant Start
EP Electronic T5 or T8, Programmed Start
3EP 3-lamp Electronic Programmed Start
(T8, T5HO) Others available.
4EP 4-Lamp Electronic T5HO (N/A 347V)
or T8, Programmed Start
EPTT Electronic Twin Tube,
Programmed Start
4⅞"
NO. OF
LAMPS
SIZE
Voltage
U 120V-277V
347 347V
A19 Pattern 19 Acrylic Lens,
Lamp type
14
17
24
28
31U1
0.125" Nominal
–
11¾"
WT14-1
Options
FO735 35K 75CRI T8
Lamps Installed
F0835 35K 82CRI T8
Lamps Installed
F5835 35K 85CRI T5
Lamps Installed
GLR Fast Blow Fuse
NYC NYC Compliant
NYCU NYC Compliant,
Union Label
4¼"
23¾"
WT22-2
3¾"
4⅞"
23¾"
WT24-2
11¾"
WT14-2
3¾"
4⅞"
11¾"
WT14-3
23¾"
WT24-3
35
5PA
Specification Grade Air Handling Troffer
LENSED TROFFERS
Features
•
Contoured housing maximizes uniform
photometric performance
•
Unique stepped ballast cover prevents
shadowing
•
Mitered corners on door presents a clean
appearance
•
Black reveal with full air handling
capabilities
•
Painted parts are treated with a five
stage phosphate bonding process and
finished with a baked white enamel;
door is painted after fabrication
•
Doors are retained by spring steel
latches and hinge from either side
•
UL listed 1598, cUL or CSA. Damp
Location standard
•
Mechanical light trap prevents light
leaks
Ordering Information
5PA
–
Model
5PA Specification
Grade Air
Handling
Troffer
–
No. of Lamps
Ceiling type
G Grid
1
2
3
4
6
One
Two
Three
Four
Six
See Product Availability
table below.
SIZE
14 1' × 4'
22 2' × 2'
24 2' × 4'
Overlap
F Flange
M Modular
32
32U6
40TT
54
2', T5: 14 Watt
2', T8: 17 Watt
2', T5HO: 24 Watt
4', T5: 28 Watt
U-Bent, 1⅝" Leg Spacing
T8: 31 Watt
4', T8: 32, 30, 28 or 25 Watt
U-Bent, 6" Leg Spacing T8:
32 Watt
Twin Tube Compact, 2G11
Base: 40 Watt
4', T5HO: 54 or 51 Watt
Air handling
S Static
RA White Regressed
A Return
H Heat Extract
C Combination
Aluminum
Aluminum
0.156" Nominal
PC1 ½" × ½" × ½" Specular
Silver Polystyrene Louver
PC2 1½" × 1½" × 1" Specular
Silver Polystyrene Louver
For more shielding options see
page 40.
Air Supply/
V Return Vanes
Heat Extract
D Dampers
VD Supply/
Return Vanes
& Heat Extract
Dampers
Ballast
NOTE: See Technical Section for other
ballast options.
E Electronic T8, Instant Start
3E 3-Lamp Electronic T8,
Instant Start
4E 4-Lamp Electronic T8,
Instant Start
24E (1) 2-Lamp and (1) 4-Lamp
Electronic T8, Instant Start
EP Electronic T5 or T8,
Programmed Start
3EP 3-Lamp Electronic T5HO or T8,
Programmed Start
4EP 4-Lamp Electronic T5HO (N/A
347V) or T8, Programmed Start
ETT Electronic Twin Tube,
Instant Start
EPTT Electronic Twin Tube,
Programmed Start
24"
5PA24-3
24"
5PA22-2
4½"
24"
5PA24-4
36
Options
FO735 35K 75CRI T8
Lamps Installed
F0835 35K 82CRI T8
Lamps Installed
F5835 35K 85CRI T5
Lamps Installed
EL Emergency
Battery Pack
GLR Fast Blow Fuse
MS9 Master/Satellite
w/9' Harness
PAF Paint After
Fabrication
NYC NYC Compliant
NYCU NYC Compliant,
Union Label
For more options see
pages 96-112.
NO. OF
LAMPS
LAMP TYPE
GRID TRIM
HEIGHT
1' × 4'
1
2
3
28, 32, 54
28, 32, 54
28, 32, 54
5¾"
5¾"
5¾"
2' × 2'
2
3
4
14, 17, 24, 31U1, 32U6, 40TT
14, 17, 24, 31U1, 40TT
14, 17, 24
4⅜"
4⅜"
4⅜"
2' × 4'
2
3
4
6
28, 32, 54
28, 32, 54
28, 32, 54
28, 32, 54
4½"
4½"
4½"
4½"
SIZE
4½"
4⅜"
Voltage
U 120V-277V
347 347V
Product Availability
24"
5PA24-2
12"
5PA14-2
Air Supply/
Shielding
A12 Pattern 12 Acrylic Lens
A19 Pattern 19 Acrylic Lens,
–
Air control
Blank None
Supply/
Extract
4½"
5¾"
–
Door
FA White Flush
Fit-in Trim
SG Slot Grid
Lamp type
14
17
24
28
31U1
–
4VS
Vandal Resistant Specification Grade Troffer
Features
Flush steel or aluminum door frame
secured by four or six tamper resistant
screws
•
Painted parts are treated with a five
stage phosphate bonding process and
finished with a baked white enamel
•
Stainless steel tamper resistant screws
optional
•
UL listed 1598, cUL or CSA. Damp
Location standard
•
High impact lens for maximum durability
•
Grid, flange, or modular trims available
LENSED TROFFERS
•
Ordering Information
4VS
–
Model
4VS Vandal
Resistant
Specification
Grade Troffer
–
No. of Lamps
2 Two
3 Three
4 Four
Ceiling type
G Grid
Overlap
See Product Availability
table below.
F Flange
M Modular
Fit-in Trim
–
–
Voltage
U 120V-277V
347 347V
Door
FS Flush Steel
FA Flush Aluminum
To select the type
of screws in door
frame, see Tamper
Resistant Options at
right.
–
Tamper resistant options
TP4 (4) Tamper Resistant
Screws (Std.)
TP6 (6) Tamper Resistant
Screws
TPS4 (4) Stainless Steel
Tamper Resistant Screws
TPS6 (6) Stainless Steel
Tamper Resistant Screws
SIZE
14 1' × 4'
22 2' × 2'
24 2' × 4'
Lamp type
14
17
24
28
31U1
32
32U6
40TT
54
Shielding
2', T5: 14 Watt
2', T8: 17 Watt
2', T5HO: 24 Watt
4', T5: 28 Watt
U-Bent, 1⅝" Leg Spacing
T8: 31 Watt
4', T8: 32, 30, 28 or 25 Watt
U-Bent, 6" Leg Spacing
T8: 32 Watt
Twin Tube Compact,
2G11 Base: 40 Watt
4', T5HO: 54 or 51 Watt
Product Availability
NO. OF
LAMPS
LAMP TYPE
GRID TRIM
HEIGHT*
1
2
3
28, 32, 54
28, 32, 54
28, 32, 54
5⅜"
5⅜"
5⅜"
5⅜"
5⅜"
5⅜"
2' × 2'
2
3
4
14, 17, 24, 31U1, 32U6, 40TT
14, 17, 24, 31U1, 40TT
14, 17, 24
*
*
*
*
*
*
2' × 4'
2
3
4
6
28, 32, 54
28, 32, 54
28, 32, 54
28, 32, 54
4¼"
4¼"
4¼"
4¼"
4½"
4½"
4½"
4½"
1' × 4'
DR12 Pattern 12 Acrylic
Lens, Impact
Resistant, 0.140"
AT12 KSH Acri-Tuf, 0.140"
LG250 Polycarbonate
Acrylic Laminate
Lens, 0.250"
LG375 Polycarbonate
Acrylic Laminate
Lens, 0.375"
4¼"
FLANGE
TRIM
HEIGHT*
SIZE
Ballast
NOTE: See Technical Section for other
ballast options.
E Electronic T8, Instant Start
3E 3-Lamp Electronic T8,
Instant Start
4E 4-Lamp Electronic T8,
Instant Start
24E (1) 2-Lamp and (1) 4-Lamp
Electronic T8, Instant Start
EP Electronic T5 or T8,
Programmed Start
3EP 3-Lamp Electronic T5HO or T8,
Programmed Start
4EP 4-Lamp Electronic T5HO (N/A
347V) or T8, Programmed Start
ETT Electronic Twin Tube,
Instant Start
EPTT Electronic Twin Tube,
Programmed Start
Options
FO735 35K 75CRI T8
Lamps Installed
F0835 35K 82CRI T8
Lamps Installed
F5835 35K 85CRI T5
Lamps Installed
EL Emergency
Battery Pack
GLR Fast Blow Fuse
H Heat Extract
(No Dampers)
MS9 Master/Satellite
w/9' Harness
PAF Paint After
Fabrication
NYC NYC Compliant
NYCU NYC Compliant,
Union Label
For more options see
pages 96-112.
5⅜"
24"
4VS24-2
4¼"
12"
4VS14-2
4¼"
24"
4VS24-3
24"
4VS24-4
Variable*
24"
4VS22-2
*Some ceiling types and options may increase height of 2' × 2' units.
Typically 4⅜" high, some options may increase this to 6⅛". Please
contact your Columbia Lighting representative for details.
37
M46
Specification Grade Circular Regressed Static Troffer
LENSED TROFFERS
Features
•
Meets demanding architectural and
aesthetic requirements
•
9" deep housing ensures no lamp
imaging in lens
Thick, arched acrylic diffuser conceals
light source yet permits high
transmission of light
•
•
•
Deep plaster flange accommodates
various ceiling thicknesses
White powder coat finish, painted after
fabrication
•
UL listed 1598, cUL or CSA. Damp
Location standard
•
18-gauge steel plaster ring eliminates
light leaks
•
Steel lens clips hold lens firmly in place
Ordering Information
M46
F
–
Model
M46 Specification
Grade
Circular
Regressed
Static Troffer
No. of Lamps
2
4
6
8
Two
Four
Six
Eight
See Product Availability
table below.
SIZE
2 2' Diameter
3 3' Diameter
4 4' Diameter
Ceiling type
F Overlap Flange
FS
OP
Door
FS White Flush
Shielding
OP Translucent
–
Steel (Std.)
Lamp Type
14
17
21
24
25
28
31U1
32
32U6
39
40TT
54
–
–
Voltage
U 120V-277V
347 347V
White Lens
Ballast
NOTE: See Technical Section for other
ballast options.
E Electronic T8, Instant Start
3E 3-Lamp Electronic T8, Instant Start
4E 4-Lamp Electronic T8, Instant Start
24E (1) 2-Lamp and (1) 4-Lamp
Electronic T8, Instant Start
EP Electronic T5 or T8, Programmed Start
3EP 3-Lamp Electronic T5HO or T8,
Programmed Start
4EP 4-Lamp Electronic T5HO (N/A 347V)
or T8, Programmed Start
2', T5: 14 Watt
2', T8: 17 Watt
3', T5: 21 Watt
2', T5HO: 24 Watt
3', T8: 25 Watt
4', T5: 28 Watt
U-Bent, 1⅝" Leg Spacing T8: 31 Watt
4', T8: 32, 30, 28 or 25 Watt
U-Bent, 6" Leg Spacing T8: 32 Watt
3', T5HO: 38 Watt
Twin Tube Compact, 2G11 Base: 40 Watt
4', T5HO: 54 or 51 Watt
Options
EL Emergency
Battery Pack
GLR Fast Blow Fuse
NYC NYC Compliant
NYCU NYC Compliant,
Union Label
Product Availability
NO. OF
LAMPS
LAMP TYPE
HEIGHT
2' Diameter
2
4
6
31U1, 32U6, 40TT
14, 17, 24
14, 17, 24
9"
9"
9"
3' Diameter
4
6
21, 25, 39
21, 25, 39
9"
9"
4' Diameter
4
6
8
28, 32, 54
28, 32, 54
28, 32, 54
9"
9"
9"
SIZE
9"
4¼" × 4¼" J-Box Access Hole
4"
24½"
26"
36½"
38"
48½"
50"
M462
M463
M464
Plaster Frame I.D.
Trim O.D.
Note: M46 must be installed prior to ceiling.
38
HH/HV Lensed
Recessed HID Lensed Troffer
Features
Ideal for manufacturing areas, retail
stores, and gymnasiums
•
White powder coat finish, painted after
fabrication
•
Horizontal or vertical lamp position
•
•
Choice of tempered glass or acrylic lens
with tempered glass overlay
Uses EISA compliant pulse start metal
halide technology
•
Louvered version also available, see
Parabolics section
•
UL listed 1598, cUL or CSA. Damp
Location standard
•
Ballast accessible from below
•
Ballast housing is made of aluminum for
maximum heat dissipation
LENSED TROFFERS
•
Ordering Information
22
–
Model
HH Horizontal
P
–
Lamp type
P Pulse Start
Lamp
Orientation
HV Vertical
Lamp
Orientation
Metal Halide
SIZE
22 2' × 2'
Lamp watts
175 175 Watt
200 200 Watt
250 250 Watt
320 320 Watt
350 350 Watt
400 400 Watt1
–
Ceiling type
G Grid
F Flange
Shielding
TG73 Tempered Glass,
Pattern 73
CTGY12 Clear Tempered
Glass with A12
Underlay
DP Drop Polycarbonate
Lens2
Door
FS White Flush Steel
FA White Flush Aluminum
RA White Regressed
Aluminum
S
–
–
Voltage
347 347V
480 480V
QT Quad-Tap,
Air handling
S Static
Options
120V, 208V,
240V, 277V
GLR
QR
NYC
NYCU
Fast Blow Fuse
Quartz Restrike
NYC Compliant
NYC Compliant,
Union Label
For other options see
pages 96-112.
Wired to
277 277V (Std.)
120 120V
208 208V
240 240V
1
4 00W horizontal positioned lamp listed for Marked Spacing only. See specification sheet for details.
Available with FS door only.
2
289⁄16"
289⁄16"
1625⁄32"
24" C-C Tees
HV22
11¾"
11¾"
24" C-C Tees
HH22
39
Door Frame and Diffuser Options
LENSED TROFFERS
Below are the door frames and lenses available for Columbia Lighting lensed troffers. The matrix identifies the availability of each option for
each specific troffer family. Other diffusers in addition to those listed below are available. Some restrictions apply.
Contact your local Columbia Lighting representative for information.
Availability Matrix
S - Standard
Door Frames
FS
FA
RA
BFS
BFA
BRA
SFA
SRA
Lenses
A12
A12125
A1212M
A12187
AT12
DR12
RF12
A15
A19
RF19
IMA
8224
8246
O - Option available on most models, contact factory for exceptions
Description
White Flush Steel
White Flush Aluminum
White Regressed Aluminum
Black Flush Steel
Black Flush Aluminum
Black Regressed Aluminum
Silver Flush Aluminum
Silver Regressed Aluminum
4PS
S
O
O
O
O
O
O
O
ST8
S
O
O
O
O
O
O
O
JT8
S
O
Description
Pattern 12 Acrylic
Pattern 12 Acrylic, 0.125" Nominal
Pattern 12 Acrylic, 0.125" Minimum
Pattern 12 Acrylic, 0.187" Nominal
KSH Acri-Tuf, 0.140"
Pattern 12 Acrylic, Impact Resistant, 0.125"
Pattern 12 Acrylic, Radio Frequency Suppressed
Pattern 15 Acrylic, 0.200" Nominal
Pattern 19 Acrylic, 0.156" Nominal
Pattern 19 Radio Frequency Suppressed
Injection Molded Acrylic, 0.150"
Holophane 8224
Holophane 8246
4PS
S
O
O
O
O
O
O
O
O
O
O
O
O
ST8
S
O
O
O
O
O
O
O
O
O
O
O
O
JT8
S
O
O
O
O
O
A12 Standard Shielding: A low brightness
clear prismatic acrylic lens provides high
efficency, maximum visual comfort and
uniform light diffusion. A female extruded
roll-embossed prismatic pattern diagonal
to the axis of the lamp delivers excellent
brightness control and high efficiency.
Square inversed prisms have a conical apex
designed to provide a clearly defined cutoff
for superior light control.
A12125: Same as above but with 0.125"
overall nominal thickness
A12125M: Same as above but measure
0.125" overall mininum thickness.
A12187: Same as above but with 0.187"
overall nominal thickness
DR12: Same as above but with impact
resistant material 0.125" overall nominal
thickness standard
RF12: Same as above but is radio frequency
suppressed.
40
O
O
O
O
O
O
* - Refer to product page for available options
Lensed Troffers
Surface
WT
5PA 4VS M46 HH/HV
PM
SM
S
S
S
S
S
S
S
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
WT
S
O
O
O
O
O
O
O
O
O
O
5PA
S
O
O
O
O
O
O
O
O
O
O
O
O
4VS M46* HH/HV*
0
O
O
O
O
O
O
O
O
O
O
O
O
PM
S
O
O
O
O
O
O
O
O
O
O
O
O
SM
S
O
O
O
O
O
O
O
O
O
O
O
O
A15: An acrylic lens with large square female
prisms provides excellent brightness control.
Measures 0.200" overall nominal thickness.
A19: Extruded male conical lens combines
superior brightness control with maximum
economy. Measures 0.156" overall nominal
thickness.
RF19: Same as above but is radio frequency
suppressed.
IMA: Precision injection molded lens provides
fine textured pattern and low brightness
in the direct glare zone. Measures 0.150"
nominal thickness.
8224: Holophane 8224 refractive grid lens
provides ultimate brightness control at high
viewing angles
8246: Holophane 8224 refractive grid lens
with opal acrylic overlay.
PM
Specification Grade Surface Mount
Features
Low profile, 3½" depth
•
•
Choice of doors from steel to extruded
aluminum, open from either side
All parts are powder coated white and
painted after fabrication
•
Spring loaded steel latches
•
Diffuser easily removable for lamp access
and cleaning
•
Available in pendant mount and row
mounting arrangements
•
Heavy gauge steel housing with
embossments for added strength
•
UL listed 1598, cUL or CSA. Damp
Location standard
•
Mitered corners
•
Prismatic acrylic lens standard
S U R FAC E
•
Ordering Information
PM
–
Model
PM Specification
Grade
Surface
Mount
–
No. of Lamps
Door
FS White Flush Steel
FA White Flush
2
3
4
6
Two
Three
Four
Six
See Product Availability
table below.
SIZE
14 1' × 4'
22 2' × 2'
24 2' × 4'
Aluminum
RA White Regressed
Aluminum
–
Shielding
A12 Pattern 12 Acrylic Lens
A19 Pattern 19 Acrylic Lens,
0.156" Nominal
PC1 ½" × ½" × ½" Specular
Silver Polystyrene Louver
PC2 1½" × 1½" × 1" Specular
Silver Polystyrene Louver
For more shielding options see
pages 40.
Lamp Type
14
17
24
25
28
31U1
32
32U6
40TT
54
–
Voltage
U 120V-277V
347 347V
Ballast
NOTE: See Technical Section for other ballast
options.
E Electronic T8, Instant Start
3E 3-Lamp Electronic T8, Instant Start
4E 4-Lamp Electronic T8, Instant Start
EP Electronic T5 or T8, Programmed Start
3EP 3-Lamp Electronic T5HO or T8,
Programmed Start
4EP 4-Lamp Electronic T5HO (N/A 347V) or
T8, Programmed Start
ETT Electronic Twin Tube, Instant Start
EPTT Electronic Twin Tube, Programmed Start
2', T5: 14 Watt
2', T8: 17 Watt
2', T5HO: 24 Watt
3', T8: 25 Watt
4', T5: 28 Watt
U-Bent, 1⅝" Leg
Spacing T8: 31 Watt
4', T8: 32, 30, 28 or
25 Watt
U-Bent, 6" Leg Spacing
T8: 32 Watt
Twin Tube Compact,
2G11 Base: 40 Watt
4', T5HO: 54 or 51 Watt
No. OF
LAMPS
LAMP TYPE
HEIGHT
1' × 4'
2
3
28, 32, 54
28, 32, 54
3½"
3½"
2' × 2'
2
3
4
14, 17, 24, 31U1, 32U6, 40TT
17, 31U1, 40TT
17
3½"
3½"
3½"
2' × 4'
2
3
4
28, 32, 54
28, 32, 54
28, 32, 54
3½"
3½"
3½"
Battery Pack
GLR Fast Blow Fuse
NYC NYC Compliant
NYCU NYC Compliant,
Union Label
For more options see
pages 96-112.
Product Availability
SIZE
Options
EL Emergency
3½"
3½"
24"
PM24-3
12"
PM14-2
3½"
24"
PM24-2
3½"
24"
PM24-4
41
SM
Surface Mount
S U R FAC E
Features
•
Low profile
•
All metal parts are treated with a five
stage phosphate bonding process and
finished with a baked white enamel
•
Choice of doors from steel to extruded
aluminum, open from either side
•
Diffuser easily removable for lamp access
and cleaning
•
Door frames and corners sealed with an
open cell gasket
•
Die formed steel housing for extra
rigidity
•
Heat sink embossments allow ballast to
run cooler and last longer
•
Mitered corners
•
•
Prismatic acrylic lens standard
UL listed 1598, cUL or CSA. Damp
Location standard
Ordering Information
SM
–
Model
SM Surface
–
No. of Lamps
2 Two
3 Three
4 Four
6 Six*
8 Eight*
Mount
Door
FS White Flush Steel
FA White Flush Aluminum
RA White Regressed
Aluminum
TFS Twin White Flush Steel
*4' × 4' only.
See Product Availability
table below.
SIZE
14
22
24
44
1' × 4'
2' × 2'
2' × 4'
4' × 4'
–
(4' × 4' only, includes
one door with center
support frame for two
lenses)
–
Shielding
A12 Pattern 12 Acrylic Lens
A19 Pattern 19 Acrylic Lens,
Voltage
U 120V-277V
347 347V
0.156" Nominal
PC1 ½" × ½" × ½" Specular
Silver Polystyrene
Louver
PC2 1½" × 1½" × 1"
Specular Silver
Polystyrene Louver
For more shielding options see
pages 40.
32
32U6
40TT
54
Battery Pack
GLR Fast Blow Fuse
For more options see
pages 96-112.
Lamp Type
14
17
24
28
31U1
Options
EL Emergency
Ballast
NOTE: See Technical Section for other ballast options.
E Electronic T8, Instant Start
3E 3-Lamp Electronic T8, Instant Start
4E 4-Lamp Electronic T8, Instant Start
EP Electronic T5 or T8, Programmed Start
3EP 3-Lamp Electronic T5HO or T8, Programmed Start
4EP 4-Lamp Electronic T5HO (N/A 347V) or T8,
Programmed Start
EPTT Electronic Twin Tube, Programmed Start
2', T5: 14 Watt (2)
2', T8: 17 Watt (2, 3, or 4)
2', T5HO: 24 Watt (2)
4', T5: 28 Watt
U-Bent, 1⅝" Leg Spacing T8:
31 Watt (2 or 3)
4', T8: 32, 30, 28 or 25 Watt
U-Bent, 6" Leg Spacing T8:
32 Watt (2)
Twin Tube Compact, 2G11
Base: 40 Watt (2 or 3)
4', T5HO: 54 or 51 Watt
Product Availability
3½"
3½"
24"
SM24-4
24"
SM24-2
SIZE
NO. OF LAMPS
LAMP TYPE
HEIGHT
1' × 4'
2
3
28, 32, 54
28, 32, 54
3½"
3½"
2' × 2'
2
3
4
14, 17, 24, 31U1, 32U6, 40TT
17, 31U1, 40TT
17
3½"
3½"
3½"
2' × 4'
2
3
4
28, 32, 54
28, 32, 54
28, 32, 54
3½"
3½"
3½"
4' × 4'
4
6
8
28, 32, 54
28, 32, 54
28, 32, 54
4½"
4½"
4½"
3½"
24"
SM24-3
Note: SM 2' × 2', 2' × 4' and 4' × 4' require four stems for
stem mounting.
42
WPM
Specification Grade Wall Bracket
Features
Ideal for hallways, stairwells, or wall
mounting directly above mirror in
lavatories
•
One piece, sectionalized extruded
acrylic diffuser has linear prismatic
downlight for excellent spread,
translucent white front for glare control,
and partially prismatic linear uplight
pattern to direct light away from wall
•
Housing is a rigid assembly with formed
steel wireway channel and die cast
aluminum end panels
•
Front and top of diffuser has smooth
exterior surfaces for easy cleaning
•
Optional pull chain switch and grounded
convenience outlet
•
Oyster powder coat finish painted after
fabrication
•
UL listed 1598, cUL or CSA. Damp
Location standard
S U R FAC E
•
Ordering Information
WPM
2
–
Model
WPM Specification
Grade Wall
Bracket
SIZE
2 2'
3 3'
4 4'
No. of Lamps
2 Two
See Product
Availability table
below.
–
–
Lamp Type
17 2', T8: 17 Watt
25 3', T8: 25 Watt
32 4', T8: 32, 30, 28
or 25 Watt
Ballast
NOTE: See Technical
Section for other ballast
options.
E Electronic T8,
Instant Start
EP Electronic T8,
Programmed Start
Voltage
U 120V-277V
347 347V
Options
EL Emergency Battery Pack
GCO Grounded Convenience
Outlet (120V only)
GLR Fast Blow Fuse
NL Candelabra Base
Incandescent Night Light
PSW Pull Chain Switch
(120V only)
Product Availability
SIZE
No. OF
LAMPS
LAMP TYPE
Width
Length
HEIGHT
2'
2
17
79/16"
24⅜"
4¾"
3'
2
25
79/16"
36⅜"
4¾"
4'
2
32
79/16"
48⅜"
4¾"
4¾"
79/16"
43
WAL
Low Profile Wall Mount
S U R FAC E
Features
•
Low profile
•
•
Downlight only or up/downlight, with or
without uplight reflector
Injection molded thermoplastic,
textured end caps
•
One piece clear prismatic acrylic diffuser
with 25% DR
All metal parts are powder coated white
after fabrication
•
Choice of T5, T8, or Twin Tube lamps
•
UL listed 1598, cUL or CSA. Damp
Location standard
•
•
Diffuser easily removable for lamp access
and cleaning
•
Heavy gauge steel housing with
embossments
Ordering Information
WAL
Model
WAL Low
Profile
Wall
Mount
–
SIZE
2 2'
3 3'
4 4'
Lamp Type
2' T8: 17 Watt
3' T8: 25 Watt
4' T5: 28 Watt
4' T8: 32, 30, 28 or 25 Watt
Twin Tube Compact, 2G11
Base: 40 Watt (2' and 4'
units only, see table below)
54 4' T5HO: 54 or 51 Watt
Ballast
NOTE: See Technical Section for
other ballast options.
E Electronic T8, Instant Start
11E Two 1-Lamp Ballasts,
Instant Start
EP Electronic T5 or T8,
Programmed Start
EPTT Electronic Twin Tube,
Programmed Start
Downlight
1U1D 1-Lamp Uplight,
1-Lamp Downlight
2UD 2-Lamp, Uplight &
Downlight
See Product Availability
table below.
3½"
44
7⅝"
1¼"
3½"
WAL4-1
Voltage
U 120V-277V
347 347V
17
25
28
32
40TT
No. of Lamps
1 1-Lamp, Downlight
2 2-Lamp, Downlight
1UD 1-Lamp, Uplight &
7⅝"
–
–
3½"
3½"
WAL4-1UD
7⅝"
7⅝"
1¼"
WAL4-1U1D
7⅝"
1¼"
Emergency Battery Pack
Grounded Convenience Outlet (120V only)
Fast Blow Fuse
Pull Switch, One Circuit (120V only)
Rotary Switch, Wired to the Downlight Circuit
on a Two Circuit Unit (120V only)
PSWD Pull Switch, Wired to the Downlight Circuit
on a Two Circuit Unit (120V only)
4PSW Four-way Pull Switch, for Two Circuit, 2-Lamp
Units (120V only)
LUB Less Uplight Baffle
NSW Night Light With Rotary Switch (120V only)
NL Incandescent Night Light Socket (120V only)
PL7 Fluorescent Night Light for 7W T-4 G23 lamp.
(Lamp not included). PL ballast will default
to fixture voltage unless specified. Not
available in 2' unit with battery pack.
PL9 Fluorescent Night Light for 9W T-4 G23 lamp.
(Lamp not included). PL ballast will default
to fixture voltage unless specified. Not
available in 2' unit with battery pack.
PL13 Fluorescent Night Light for 13W T-4 GX23
lamp. (Lamp not included). PL ballast will
default to fixture voltage unless specified.
Not available in 2' unit with battery pack.
NYC NYC Compliant
NYCU NYC Compliant, Union Label
For more options see pages 96-112.
Product Availability
No. OF LAMPS IN
CROSS SECTION
NO. OF
LAMPS IN
FIXTURE
LAMP TYPE
WAL2
1
2
1
2
17, 40TT
17, 40TT
WAL3
1
2
1
2
25
25
WAL4
1
2
1
2
1
2
2
4
28, 32, 54
28, 32, 54
40TT
40TT
SERIES
3½"
WAL4-2
Options
EL
GCO
GLR
PSW
RSWD
WAL4-2UD
W
Slim Wall Mount Light
Features
Slim design, meets ADA requirements
•
•
White acrylic diffuser, easily removable
for lamp access
Heat sink embossments allow ballast to
run cooler and last longer
•
All metal parts are treated with a five
stage phosphate bonding process and
finished with a baked white enamel
•
UL listed 1598, cUL or CSA. Damp
Location standard
•
Injection molded plastic ends hold
diffuser in place
•
Grounded convenience outlet and on/off
push switch standard on 120V models
•
Heavy gauge die formed steel housing
for maximum rigidity
S U R FAC E
•
Ordering Information
W
–
Model
W Slim Wall
Mount
Light
SIZE
2 2'
3 3'
4 4'
–
–
No. of Lamps
1 One
2 Two
Lamp Type
Ballast
2', T5 14 Watt
2', T8: 17 Watt
3', T5: 21 Watt
2', T5HO: 24 Watt
3', T8: 25 Watt
4', T5: 28 Watt
4', T8: 32, 30, 28
or 25 Watt
39 3', T5HO: 39 Watt
54 4', T5HO: 54 Watt
NOTE: See Technical
Section for other ballast
options.
E Electronic T8,
Instant Start
EP Electronic T5 or
T5HO, Programmed
Start
14
17
21
24
25
28
32
See Product
Availability table
below.
Product Availability
NO. OF LAMPS
IN FIXTURE
LAMP TYPE
LAMP
LENGTH
WIDTH
LENGTH
HEIGHT
W2
1
2
1
2
14, 17, 24
14, 17, 24
2'
2'
4"
4"
24½"
24½"
4⅞"
4⅞"
W3
1
2
1
2
21, 25, 39
21, 25, 39
3'
3'
4"
4"
36½"
36½"
4⅞"
4⅞"
W4
1
2
1
2
28, 32, 54
28, 32, 54
4'
4'
4"
4"
48½"
48½"
4⅞"
4⅞"
Options
EL Emergency Battery Pack, T8
4ft only
EL5 Emergency Battery Pack, T5 or
T5HO, 4 ft only
GLR Fast Blow Fuse
LCO Less Grounded Convenience
Outlet
Less Switch
Paint After Fabrication
Pull Chain Switch (120V only)
18" Stem w/Canopy
18" 45 Swivel Stem w/Canopy
For more options see pages 96-112.
LSW
PAF
PSW
S18
SS18
71/16"
NO. OF LAMPS IN
CROSS SECTION
MODEL
Voltage
U 120V-277V
347 347V
4"
½"
4½"
4⅞"
Row Mounting Detail
45
SA
Wall Mount Light
S U R FAC E
Features
•
Uplight, downlight, and frontlight
•
One piece clear prismatic acrylic diffuser
•
All metal parts are treated with a five
stage phosphate bonding process and
finished with a baked white enamel
•
Heavy gauge steel housing
•
Rotary lock lampholders for positive
lamp contact
•
Grounded convenience outlet and on/off
push switch standard on 120V models.
•
SAM models have metal baffle to
separate uplight from downlight and
two one-lamp ballasts for separate up/
down switching
•
UL listed 1598, cUL or CSA. Damp
Location standard
Ordering Information
SA
Model
SA Wall Mount
SIZE
2 2' (SA only)
3 3'
4 4'
Light
SAM (Includes
baffle for
directional
light)
E
–
–
No. of Lamps
1 One (SA only)
2 Two
See Product
Availability table
Below.
Lamp Type
17 2', T8: 17 Watt
(SA only)
25 3', T8: 25 Watt
32 4', T8: 32, 30,
–
Ballast
Voltage
U 120V-277V
347 347V
NOTE: See Technical Section
for other ballast options.
E Electronic Instant
Start (Std.)
Options
4SW 4-Way Switch
EL Emergency Battery
Pack
GLR Fast Blow Fuse
LCO Less Convenience
28 or 25 Watt
Outlet
LSW Less Switch
OFP Opal Front Panel
PAF Paint After
Fabrication
PSW Pull Chain Switch
(120V only) (SA
only, standard on
SAM)
For more options see pages
96-112.
Note: SA fixture includes push-button switch (120V only).
71/16"
71/16"
Product Availability
No. Of LAMPS IN
CROSS SECTION
No. Of
LAMPS IN
FIXTURE
LAMP
TYPE
LAMP
LENGTH
WIDTH
LENGTH
HEIGHT
SA2
1
2
1
2
17
17
2'
2'
71/16"
71/16"
24½"
24½"
4½"
4½"
SA3
1
2
1
2
25
25
3'
3'
71/16"
71/16"
36½"
36½"
4½"
4½"
SA4
1
2
1
2
32
32
4'
4'
71/16"
71/16"
48½"
48½"
4½"
4½"
SERIES
4½"
4½"
SA
71/16"
SA
½"
71/16"
4½"
SAM
46
Row Mounting Detail
SAM3
2
2
25
3'
71/16"
36½"
4½"
SAM4
2
2
32
4'
71/16"
48½"
4½"
PR
Specification Grade Bed Light
Features
•
Ideal for wall mounting directly above beds in
hospitals and nursing homes
•
•
•
Housing is rigid assembly with formed steel
wireway channel, die cast aluminum end
panels, and extruded aluminum front panel
•
Internal steel divider baffle forms light-tight
top and bottom lamp compartments
•
•
Longitudinal linear prisms in downlight
portion for controlled direct illumination
Oyster powder coat finish painted after
fabrication
•
Optional pull chain switch and grounded
convenience outlet
•
UL listed 1598, cUL or CSA. Damp Location
standard
•
Partially prismatic linear acrylic uplight
diffuser directs light away from the wall and
provides general room illumination
S U R FAC E
Extruded aluminum front panel
Optional Quick-Change electrical tray
connects and disconnects mechanically and
electrically with one step, tool-free action,
permitting service without disruption to
patient
Ordering Information
PR
–
Model
PR Specification
SIZE
2 2'
3 3'
4 4'
Grade Bed
Light
–
–
No. of Lamps
1U1D 1-Lamp Uplight,
1-Lamp Downlight
2U1D 2-Lamp Uplight,
1-Lamp Downlight
See Product Availability
table below.
Lamp Type
Ballast
NOTE: See Technical
17 2', T8: 17 Watt
Section for other ballast
25 3', T8: 25 Watt
options.
32 4', T8: 32, 30, 28
E Electronic T8,
or 25 Watt
Voltage
U 120V-277V
347 347V
Instant Start, Two
ballasts per fixture
EP Electronic T8,
Programmed Start,
Two ballasts per
fixture
Options
EL Emergency Battery Pack
GCO Grounded Convenience Outlet
(120V only)
GLR Fast Blow Fuse
NL Candelabra Base
Incandescent Night Light
PSW Pull Chain Switch (Mounted
on right) (120V only)
PSWL Pull Chain Switch (Mounted
on left) (120V only)
4PSW 4-Way Pull Chain Switch
(Up, down, all on, all off)
(120V only)
QCT Quick-Change Electrical Tray1
1
Only available in 3' and 4' luminaires.
Product Availability
steel u-channel braces
No. OF
LAMPS
LAMP TYPE
Width
Length
HEIGHT
2'
2
3
17
17
79/16"
79/16"
24⅜"
24⅜"
4¾"
4¾"
3'
2
3
25
25
79/16"
79/16"
36⅜"
36⅜"
4¾"
4¾"
4'
2
3
32
32
79/16"
79/16"
48⅜"
48⅜"
4¾"
4¾"
SIZE
QCT
Quick-Change
Electrical Tray
fixture mounting plate
heavy gauge steel
outlet box (by others)
pre-wired duplex receptacles
pre-wired duplex plugs
4¾"
4¾"
79/16"
PR1U1D
wall mounting bar–heavy
gauge steel, safety screw
79/16"
PR2U1D
47
WM
Premium Wall/Bed Light
S U R FAC E
Features
•
Removable electrical system for ease of
maintenance
•
All metal parts are powder coated white,
painted after fabrication
•
Prismatic acrylic uplight and downlight
lens
•
•
Upper lens is easily removable for
cleaning or lamp access
120V models with upward and downward
lamps are standard with 4-way pull
switch and 3' pull cord
•
UL listed 1598, cUL or CSA. Damp
Location standard
•
20-gauge housing and electrical tray
•
Downlight lens is securely framed in
20-gauge steel with steel hinges and
spring loaded steel latches
Ordering Information
WM
4
Model
WM Premium Wall/
Bed Light
SIZE
4 4'
–
–
Lamp Type
1D32 1-Down T8: 32 Watt
1U1D32 1-Up, 1-Down T8:
32 Watt, 2 Ballasts
1U2D32 1-Up, 2-Down T8:
32 Watt, 2 Ballasts
2D32 2-Down T8: 32 Watt
2U1D32 2-Up, 1-Down T8:
32 Watt, 2 Ballasts
E
–
u
Ballast
NOTE: See Technical Section
for other ballast options.
E Electronic Instant
Start (Std.)
Options
GCO Grounded Convenience Outlet
Voltage
U 120V-277V
(120V only)
GLR Fast Blow Fuse
NL Incandescent Night Light Socket*
* For more information about NL option,
see page 108.
Product Availability
513/16"
513/16"
9⅜"
WM4-1D
513/16"
513/16"
9⅜"
WM4-2U1D
513/16"
9⅜"
WM4-1U2D
48
9⅜"
WM4-1U1D
9⅜"
WM4-2D
SERIES
LAMPS IN
CROSS SECTION
LAMPS IN
FIXTURE
LAMP
TYPE
LAMP
LENGTH
WIDTH
LENGTH
HEIGHT
WM4-1D
1
1
32
4'
9⅜"
50⅜"
513/16"
WM4-1U1D
2
2
32
4'
9⅜"
50⅜"
513/16"
WM4-2U1D
3
3
32
4'
9⅜"
50⅜"
513/16"
WM4-2D
2
2
32
4'
9⅜"
50⅜"
513/16"
WM4-1U2D
3
3
32
4'
9⅜"
50⅜"
513/16"
BIL
Bi-Level Luminaire
Features
• Energy saving luminaire with integrated occupancy/
• Sensor includes adjustable time delay and motion/
• Bi-level light control offers safety and security
• White aluminum body allows for greater heat
daylight harvesting controls
and areas where maximum light levels are not
needed when area is unoccupied
• A single low wattage 2' T8 lamp delivers constant
light output while the 4' T8 lamps are controlled by
an integral sensor
• Hubbell Building Automation- Internally mounted
dissipation
S U R FAC E
• Ideal for stairwells, parking structures, restrooms
photocell sensitivity
• Tool-less access to ballast for ease of maintenance
• Can be surface mounted or suspended
• Multiple ballast options available for needed energy
savings and light output
• All luminaires are built to UL 1598 standards and
bear appropriate UL and cUL or CSA labels. Damp
location labeling is standard. Units are UL 924 listed
when equipped with optional battery back-up and
meet requirements of the life safety code /NFPA101.
Passive Infrared Occupancy/Daylight Harvesting
sensor with 360° coverage lens and a 2:1 radius to
height ratio coverage pattern
Ordering Information
BIL
4
Model
BIL Bi-Level
–
2
32
No. of Lamps in
Cross Section
Primary Ballast
NOTE: See Technical Section for other
ballast options.
EP Electronic T8, 0.88 Ballast Factor,
Programmed Start
EPLW Electronic T8, 0.77 Ballast Factor,
Low Wattage, Programmed Start
EPHL Electronic T8, 1.18 Ballast Factor,
High Light Output, Programmed
Start
2 Two
See Product Availability
table below.
Luminaire
SIZE
4 4'
U
–
–
Options
Voltage
U 120V-277V
FO730
FO735
FO830
FO835
EL
NYC
NYCU
30K 75CRI T8 Lamps Installed
35K 75CRI T8 Lamps Installed
30K 82CRI T8 Lamps Installed
35K 82CRI T8 Lamps Installed
Emergency Battery Pack
NYC Compliant
NYC Compliant, Union Label
Lamp type
32 4', T8: 32, 30, 28 or 25
Watt and 2', T8: 17 Watt
Unoccupied
Occupied
(1) 17 Watt T8 Lamp
(1) 17 Watt T8 Lamp &
(2) 32 Watt T8 Lamps
Ballast Type
Watts
Lumens
Watts
Lumens
EP (0.88 BF)
EPLW (0.77 BF)
EPHL (1.18 BF)
15
15
15
989
989
989
74
62
90
4669
4208
5170
6"
Product Availability
SIZE
NO. OF
CONTROLLED
LAMPS
CONTROLLED
LAMP TYPE
NO. OF
CONSTANT
LAMPS
CONSTANT
LAMP TYPE
WIDTH
LENGTH
HEIGHT
4'
2
32
1
17
6"
54"
4"
4"
49
UC/UCS
Undercabinet/Low Profile Undercabinet
S U R FAC E
Features
UC
Model
UC Undercabinet
UC is 1¾" deep, designed for T8 lamps
•
Heavy gauge steel housing
•
UCS is 1⅛" deep, designed for T5 lamps
•
Optional grounded convenience outlet
•
White acrylic diffuser
•
UL listed 1598, cUL or CSA
•
Baked white enamel finish, painted after
fabrication
•
Damp Location standard (UCS)
•
Damp location standard
•
Diffuser easily removable for lamp access
and cleaning
1
–
SIZE
18 18"
24 24"
36 36"
48 48"
•
No. of Lamps
1 One
See Product
Availability
table below.
u
–
Lamp Type
15
17
20
25
30
32
18", T12: 15 Watt
24", T8: 17 Watt
24", T12: 20 Watt
36", T8: 25 Watt
36", T12: 30 Watt
48", T8: 32 Watt
Ballast
–
Voltage
U 120V-277V
NOTE: See Technical Section for
other ballast options.
Blank HPF, Non-Energy Saving
L Low Power Factor
E Electronic T8, Instant Start
Options
F0735 35K 75CRI T8 Lamps
Installed
GCO Grounded Convenience
Outlet (120V only)
GLR Fast Blow Fuse
WSW On-Off Rocker Switch
(120V only)
Product Availability
1¾"
SERIES
SIZE
No. of LAMPS
IN FIXTURE
LAMP TYPE
WIDTH
LENGTH
HEIGHT
UC
18"
24"
36"
48"
1
1
1
1
15
17, 20
25, 30
32
5¼"
5¼"
5¼"
5¼"
18"
24"
36"
48"
1¾"
1¾"
1¾"
1¾"
5¼"
Ordering Information
UCS
Model
UCS Low Profile
Undercabinet
1
–
SIZE
12 12"
21 21"
24 24"
33 33"
42 42"
No. of Lamps
1 One
See Product
Availability
table Below.
–
Lamp Type
08 12" or 24", T5: 8 Watt
13 21" or 42", T5: 13 Watt
0813 33", T5: (1) 8 Watt, (1)
PH
120
–
Voltage
120 120V
Ballast
PH Preheat
Options
WSW On-Off Rocker Switch
GCO Grounded Convenience
Outlet
FCW Cool White Lamp(s)
13 Watt
See Product Availability table
below for lamping options.
Installed
Product Availability
No. OF LAMPS
1⅛"
5"
50
SERIES
SIZE
8W T5
UCS
12"
21"
24"
33"
42"
1
13W T5
1
2
1
1
2
WIDTH
LENGTH
HEIGHT
5"
5"
5"
5"
5"
12¼"
21¼"
24½"
33½"
42½"
1⅛"
1⅛"
1⅛"
1⅛"
1⅛"
MW/EW
Injection Molded/Extruded Wraparound
Features
Clear injection molded acrylic prismatic
diffuser, flat bottom with vertical sides
(MWN/MWW)
•
End cap has a clean appearance (knockout
provided for continuous row only)
•
Clear extruded acrylic prismatic diffuser, flat
bottom, vertical sides, and injection molded
luminous ends (EWN/EWW)
•
Optional spacers allow direct mounting on
combustible low density cellulose fiberboard
ceilings
•
Lens positively secured by torsion springs and
can be easily removed
•
White powder coat finish is applied after
fabrication on all metal parts, less ballast
cover (baked white enamel)
•
Heavy gauge steel housing with embossments
•
•
Surface or stem mount
Sturdy metal end pieces provide overall
strength to the fixture
•
UL listed 1598, cUL or CSA. Damp Location
standard
WRAPS
•
Ordering Information
–
–
Model
Injection Molded Wrap
MWN 10⅞" Narrow
MWW 15⅞" Wide
Extruded Wrap
EWN 10⅞" Narrow
EWW 15⅞" Wide
SIZE
4 4'
8 8'
No. of Lamps in
Cross Section
2 Two
3 Three
4 Four
See Product
Availability table
below.
Lamp Type
28 4', T5: 28 Watt
32 4', T8: 32, 30, 28
or 25 Watt
54 4', T5HO: 54 or
51 Watt
–
Ballast
NOTE: See Technical Section for
other ballast options.
E Electronic Instant Start
(Std.)
3E 3-Lamp Electronic T8,
Instant Start
4E 4-Lamp Electronic T8,
Instant Start
EP Electronic T5 or T8,
Programmed Start
3EP 3-Lamp Electronic T5HO
or T8, Programmed Start
4EP 4-Lamp Electronic
T5HO (N/A 347V) or T8,
Programmed Start
Voltage
U 120V-277V
120 120V
347 347V
Options
EL Emergency Battery
Pack
GLR Fast Blow Fuse
NL Compact Twin Tube
Fluorescent Night
Light in G23 Base for
5W, 7W, 9W or GX23
Base for 13W. (120V
or 277V; Lamp not
included)
SB3 Stem Mounting
Bracket (Required for
3-Lamp units only)
NYC NYC Compliant
NYCU NYC Compliant, Union
Label
Accessories
(Order Separately)
S18 18" Stem w/Canopy
SS18 18" 45° Swivel Stem w/Canopy
CS-2 Ceiling Spacer
Product Availability
15⅞"
SERIES
No. of lamps in
cross section
No. Of lamps
in fixture
Lamp Type
Lamp
length
WIDTH
LENGTH
HEIGHT
MWN4/EWN4
MWN8/EWN8
2
2
2
4
28, 32, 54
28, 32, 54
4'
4'
10⅞"
10⅞"
4'
8'
4⅜"
4⅜"
MWW4/EWW4
2
3
4
2
3
4
28, 32, 54
28, 32, 54
28, 32, 54
4'
4'
4'
15⅞"
15⅞"
15⅞"
4'
4'
4'
4⅜"
4⅜"
4⅜"
MWW8/EWW8
2
3
4
4
6
8
28, 32, 54
28, 32, 54
28, 32, 54
4'
4'
4'
15⅞"
15⅞"
15⅞"
8'
8'
8'
4⅜"
4⅜"
4⅜"
4⅜"
MWW/EWW
10⅞"
4⅜"
MWN/EWN
51
WC
Specification Grade Wraparound
WRAPS
Features
•
Clear acrylic prismatic diffuser, flat
bottom with vertical sides, and injection
molded glow ends
•
All metal parts are treated with a five
stage phosphate bonding process and
finished with a baked white enamel
•
Two, three, or four-lamp cross sections
•
Hinges from either side
•
Heavy gauge steel housing die embossed
for maximum rigidity
•
UL listed 1598, cUL or CSA. Damp
Location standard
•
Heat sink embossments and levelling
projections allow direct mounting of
HPF fixtures on combustible low density
cellulose fiberboard ceilings
Ordering Information
–
Model
WC 10" Wide
WCW 15⅜" Wide
SIZE
2 2'
4 4'
8 8'
Voltage
U 120V-277V
120 120V
347 347V
NOTE: See Technical Section
for other ballast options.
E Electronic Instant
Start (Std.)
3E 3-Lamp Electronic T8,
Instant Start
4E 4-Lamp Electronic T8,
Instant Start
24E (1) 2-Lamp and (1)
Lens
4-Lamp Electronic T8,
Instant Start
Blank Clear Prismatic
Acrylic
EP Electronic T5 or T8,
Programmed Start
DR 50% DR content,
Clear Prismatic
3EP 3-Lamp Electronic
Acrylic
T5HO or T8,
Programmed Start
4EP 4-Lamp Electronic
T5HO (N/A 347V) or
T8, Programmed Start
24EP (1) 2-Lamp and (1)
4-Lamp Electronic T5
or T8, Programmed
Start
2', T5: 14 Watt
2', T8: 17 Watt
2', T5HO: 24 Watt
4', T5: 28 Watt
4', T8: 32, 30, 28
or 25 Watt
54 4', T5HO: 54 Watt
See Product
Availability table
below.
3/32"
15/16"
2½"
End
215/16"
15/16"
2½"
End
WCW 215/16"
2-Lamp
15⅜" Shielding w/Glow End
3/32"
15/16"
2½"
End
WCW
3-Lamp 215/16"
15⅜" Shielding w/Glow End
Options
EL
GLR
PAF
SB3
Emergency Battery Pack
Fast Blow Fuse
Paint After Fabrication
Stem Mounting Bracket
(Required for 3-Lamp
units only)
NYC NYC Compliant
NYCU NYC Compliant, Union
Label
Accessories
(Order Separately)
S18 18" Stem w/Canopy
SS18 18" 45° Swivel Stem w/Canopy
Product Availability
10" Shielding w/Glow End
3/32"
52
–
Ballast
Lamp Type
14
17
24
28
32
No. of Lamps in
Cross Section
2 Two
3 Three
4 Four
WC
–
–
SERIES
NO. OF LAMPS IN
CROSS SECTION
NO. OF
LAMPS IN
FIXTURE
LAMP TYPE
LAMP
LENGTH
WIDTH
LENGTH
HEIGHT
WC2
WC4
WC8
2
2
2
2
2
4
14, 17, 24
28, 32, 54
28, 32, 54
2'
4'
4'
10"
10"
10"
2'
4'
8'
215/16"
215/16"
215/16"
WCW2
2
4
2
4
14, 17, 24
14, 17, 24
2'
2'
15⅜"
15⅜"
2'
2'
215/16"
215/16"
WCW4
2
3
4
2
3
4
28, 32, 54
28, 32, 54
28, 32, 54
4'
4'
4'
15⅜"
15⅜"
15⅜"
4'
4'
4'
215/16"
215/16"
215/16"
WCW8
2
3
4
4
6
8
28, 32, 54
28, 32, 54
28, 32, 54
4'
4'
4'
15⅜"
15⅜"
15⅜"
8'
8'
8'
215/16"
215/16"
215/16"
AW
Low Profile Wraparound
Features
Clear acrylic prismatic diffuser with flat
bottom and vertical sides
•
Two, three, or four-lamp cross sections
•
Hinges from either side
•
White steel end plates with flush
knockouts for continuous row mounting
•
Heavy gauge steel housing die embossed
for maximum rigidity
•
Heat sink embossments and levelling
projections allow direct mounting of
HPF fixtures on combustible low density
cellulose fiberboard ceilings
•
All metal parts are treated with a five
stage phosphate bonding process and
finished with a baked white enamel
•
UL listed 1598, cUL or CSA. Damp
Location standard
WRAPS
•
Ordering Information
–
–
Model
AWN 85/16" Wide
AWW 14⅝" Wide
SIZE
2 2' (AWN
only)
4 4'
8 8'
No. of Lamps in
Cross Section
2 Two
3 Three
4 Four
Lamp Type
17 2', T8: 17 Watt
28 4', T5: 28 Watt
32 4', T8: 32, 30, 28
See Product
Availability table
below.
54 4', T5HO: 54 Watt
or 25 Watt
Product Availability
–
Ballast
NOTE: See Technical Section
for other ballast options.
E Electronic Instant
Start (Std.)
3E 3-Lamp Electronic T8,
Instant Start
4E 4-Lamp Electronic T8,
Instant Start
24E (1) 2-Lamp and (1)
4-Lamp Electronic T8,
Instant Start
EP Electronic T5 or T8,
Programmed Start
3EP 3-Lamp Electronic
T5HO or T8,
Programmed Start
4EP 4-Lamp Electronic
T5HO (N/A 347V) or
T8, Programmed Start
Voltage
U 120V-277V
347 347V
No. of lamps in
cross section
No. Of lamps
in fixture
Lamp Type
Lamp
length
WIDTH
LENGTH
HEIGHT
AWN2
AWN4
AWN8
2
2
2
2
2
4
17
28, 32, 54
28, 32, 54
2'
4'
4'
85/16"
85/16"
85/16"
2'
4'
8'
2⅞"
2⅞"
2⅞"
AWW4
2
3
4
2
3
4
28, 32, 54
28, 32, 54
28, 32, 54
4'
4'
4'
14⅝"
14⅝"
14⅝"
4'
4'
4'
225/32"
225/32"
225/32"
AWW8
2
3
4
4
6
8
28, 32, 54
28, 32, 54
28, 32, 54
4'
4'
4'
14⅝"
14⅝"
14⅝"
8'
8'
8'
225/32"
225/32"
225/32"
Emergency Battery Pack
Fast Blow Fuse
Paint After Fabrication
Stem Mounting Bracket
(Required for 3-Lamp
units only)
NYC NYC Compliant
NYCU NYC Compliant, Union
Label
For more options see pages
96-112.
Accessories
(Order Separately)
S18 18" Stem w/Canopy
SS18 18" 45° Swivel Stem w/Canopy
Ceiling
SERIES
Options
EL
GLR
PAF
SB3
1/16"
2⅞"
Ceiling
AWN
85/16"
15/16"
225/32"
AWW
14⅝"
3/32" Ceiling
15/16" 225/32" AWW
14⅝"
53
AD
Corridor Light
WRAPS
Features
•
Slim design
•
White acrylic diffuser, easily removable
for lamp access
•
Injection molded plastic ends hold
diffuser in place
•
Heat sink embossments allow ballast to
run cooler and last longer
•
Ceiling and wall mounting
•
All metal parts are treated with a five
stage phosphate bonding process and
finished with a baked white enamel
•
UL listed 1598, cUL or CSA. Damp
Location standard
Ordering Information
AD
–
–
Model
AD Corridor
SIZE
2 2'
3 3'
4 4'
Light
No. of Lamps in
Cross Section
1 One
2 Two
See Product
Availability table
below.
–
Lamp Type
Ballast
2', T5: 14 Watt
2', T8: 17 Watt
3', T5: 21 Watt
2', T5HO: 24 Watt
3', T8: 25 Watt
4', T5: 28 Watt
4', T8: 32, 30, 28
or 25 Watt
39 3', T5HO: 39 Watt
54 4', T5HO: 54 or
51 Watt
NOTE: See Technical Section
for other ballast options.
E Electronic Instant Start
(Std.)
EP Electronic T5 or T8,
Programmed Start
14
17
21
24
25
28
32
Voltage
U 120V-277V
347 347V
Options
EL Emergency Battery
Pack (T8 lamps only)
GLR Fast Blow Fuse
PAF Paint After Fabrication
For more options and
accessories see pages 96-112.
Accessories
(Order Separately)
S18 18" Stem w/Canopy
SS18 18" 45° Swivel Stem w/Canopy
Product Availability
4⅞"
4½"
71/16"
½"
4"
Row Mounting Detail
54
No. of LAMPS IN
CROSS SECTION
No. of
LAMPS IN
FIXTURE
LAMP TYPE
LAMP
LENGTH
WIDTH
LENGTH
HEIGHT
AD2
1
2
1
2
14, 17, 24
14, 17, 24
2'
2'
4⅞"
4⅞"
2'
2'
4"
4"
AD3
1
2
1
2
21, 25, 39
21, 25, 39
3'
3'
4⅞"
4⅞"
3'
3'
4"
4"
AD4
1
2
1
2
28, 32, 54
28, 32, 54
4'
4'
4⅞"
4⅞"
4'
4'
4"
4"
SERIES
PT
Premium Corridor Wraparound
Features
Clear acrylic prismatic diffuser, flat
bottom with vertical sides, and injection
molded ends sonically welded to the
prismatic extrusion
•
Injection molded plastic ends are
removable for continuous row mounting
•
Heat sink embossments and levelling
projections allow direct mounting of
HPF fixtures on combustible low density
cellulose fiberboard ceilings
•
All metal parts are treated with a five
stage phosphate bonding process and
finished with a baked white enamel
•
Matches WC series wraparound in
appearance
•
Heavy gauge steel housing die embossed
for maximum rigidity
•
UL listed 1598, cUL or CSA, Damp
Location standard
WRAPS
•
Ordering Information
PT
–
–
Model
PT Premium
Corridor
Wraparound
SIZE
2 2'
4 4'
8 8'
No. of Lamps in
Cross Section
1 One
2 Two
See Product
Availability table
below.
–
Lamp Type
Ballast
2', T5: 14 Watt
2', T8: 17 Watt
2', T5HO: 24 Watt
4', T5: 28 Watt
4', T8: 32, 30, 28
or 25 Watt
54 4', T5HO: 54 or
51Watt
NOTE: See Technical Section
for other ballast options.
E Electronic Instant
Start (Std.)
4E 4-Lamp Electronic T8,
Instant Start
EP Electronic T5 or T8,
Programmed Start
4EP 4-Lamp Electronic
T5HO (N/A 347V) or
T8, Programmed Start
14
17
24
28
32
Voltage
U 120V-277V
347 347V
Options
EL Emergency Battery
Pack
GLR Fast Blow Fuse
PAF Paint After Fabrication
For more options and
accessories see pages 96-112.
Accessories
(Order Separately)
S18 18" Stem w/Canopy
SS18 18" 45° Swivel Stem w/Canopy
Product Availability
No. Of LAMPS IN
CROSS SECTION
NO. OF
LAMPS IN
FIXTURE
PT2
1
2
PT4
PT8
SERIES
43/16"
LAMP TYPE
LAMP
LENGTH
WIDTH
LENGTH
HEIGHT
1
2
14, 17, 24
14, 17, 24
2'
2'
6¾"
6¾"
2'
2'
413/16"
413/16"
1
2
1
2
28, 32, 54
28, 32, 54
4'
4'
6¾"
6¾"
4'
4'
413/16"
413/16"
1
2
2
4
28, 32, 54
28, 32, 54
4'
4'
6¾"
6¾"
8'
8'
413/16"
413/16"
413/16"
27/16"
6¾"
55
RO
Corridor Wraparound
WRAPS
Features
•
Clear acrylic prismatic diffuser, flat
bottom with vertical sides
•
Hinges from either side
•
Injection molded plastic ends are
removable for continuous row mounting
•
Heavy gauge steel housing die embossed
for maximum rigidity
•
Matches the AWN series wraparound in
appearance
•
Heat sink embossments and levelling
projections allow direct mounting of
HPF fixtures on combustible low density
cellulose fiberboard ceilings
•
All metal parts are treated with a five
stage phosphate bonding process and
finished with a baked white enamel
•
UL listed 1598, cUL or CSA. Damp
Location standard
Ordering Information
RO
Model
RO Corridor
Wraparound
–
–
SIZE
2 2'
4 4'
8 8'
No. of Lamps in
Cross Section
1 One
2 Two
See Product
Availability table
below.
Lamp Type
17 2', T8: 17 Watt
28 4', T5: 28 Watt
32 4', T8: 32, 30, 28
or 25 Watt
54 4', T5HO: 54 Watt
43/16"
–
Ballast
27/16"
6"
56
Options
EL Emergency Battery Pack
GLR Fast Blow Fuse
PAF Paint After Fabrication
For more options and
accessories see pages 96-112.
Accessories
(Order Separately)
S18 18" Stem w/Canopy
SS18 18" 45° Swivel Stem w/Canopy
Product Availability
NO. OF LAMPS IN
CROSS SECTION
NO. OF
LAMPS IN
FIXTURE
LAMP TYPE
LAMP
LENGTH
WIDTH
LENGTH
HEIGHT
RO2
1
2
1
2
17
17
2'
2'
6"
6"
2'
2'
47/16"
47/16"
RO4
1
2
1
2
28, 32, 54
28, 32, 54
4'
4'
6"
6"
4'
4'
47/16"
47/16"
RO8
1
2
2
4
28, 32, 54
28, 32, 54
4'
4'
6"
6"
8'
8'
47/16"
47/16"
SERIES
47/16"
Voltage
U 120V-277V
347 347V
NOTE: See Technical Section
for other ballast options.
E Electronic T8 Instant
Start
4E 4-Lamp Electronic T8,
Instant Start
EP Electronic T5 or T8,
Programmed Start
3EP 3-Lamp Electronic
T5HO or T8,
Programmed Start
4EP 4-Lamp Electronic
T5HO (N/A 347V) or
T8, Programmed Start
VL
Vandal Resistant Wrap
Features
Ideal for high abuse areas
•
•
Effective, secure illumination mounts to
ceilings or walls
Closed-cell gasketing inhibits entry of
airborne contaminants or insects
•
Backpan is only ⅝" deep to hug walls or
ceilings and deter vandals
•
Optional stand-off mounting box
permits surface conduit entry
•
UL listed 1598, cUL or CSA. Damp
Location standard, Wet Location option
available
•
Rugged heavy duty steel construction
•
Diffuser is .187" thick clear prismatic
polycarbonate for high-impact
protection
•
Six tamper-resistant screws for
maximum security
WRAPS
•
Ordering Information
VL
4
Model
VL Vandal
Resistant
Wrap
2
–
SIZE
4 4'
–
No. of Lamps in
Cross Section
2 Two
See Product
Availability table
below.
Lamp Type
28 4', T5: 28 Watt
32 4', T8: 32, 30, 28
or 25 Watt
54 4', T5HO: 54 or
51 Watt
–
Ballast
NOTE: See Technical Section
for other ballast options.
E Electronic T8 Instant
Start
EP Electronic T5 or T8,
Programmed Start
Note: Certain non-standard
ballast cases may not fit
the VL. Contact factory for
details.
Voltage
U 120V-277V
347 347V
Options
GLR Fast Blow Fuse
WL Wet Location
(Ceiling only)
EL Emergency Battery Pack
T8 350-450 lumens
EL5 Emergency Battery Pack
T5 390-700 lumens
Accessories
(Order Separately)
VLSC Surface Conduit Entry Box
VLTS Tamper Resistant
Screwdriver
Note: Certain non-standard
ballast cases many not fit the VL.
Contact factory for details.
Product Availability
SERIES
No. of
lamps
LAMP type
WIDTH
LENGTH
HEIGHT
VL
2
28, 32, 54
9½"
51"
3½"
3½"
9½"
VL
1⅜"
9"
VLSC Surface Conduit Entry Box
57
VR
Vandal Resistant Wraparound
WRAPS
Features
•
Ideal for vandal-prone areas, such as schools,
hallways, dormitories, restrooms, bus stops,
and locker rooms
•
Effective, secure illumination mounts to
ceilings or walls
•
Rugged, 16 gauge heavy duty steel housing
•
Diffuser is UV stabilized .130" thick,
one-piece, prismatic polycarbonate for
high-impact protection
•
Formed end cap welded to housing for
additional strength
•
Wireway extends below lamp to protect lamp
for impact breakage
•
White powder coat finish painted after
fabrication
•
For ceiling, wall, or pendant - individual or
continuous row
•
Six tamper-resistant screws protect against
unauthorized entry
•
UL listed 1598, cUL or CSA. Wet Location
(covered ceiling mount), Damp Location (wall
mount)
Ordering Information
VR
4
Model
VR Vandal
Resistant
Wraparound
WIDTH
N Narrow (51/8")
M Medium (85/16")
W Wide (125/16")
32
–
SIZE
4 4'
No. of Lamps
1
2
3
4
One (VRN)
Two (VRN, VRM)
Three (VRW)
Four (VRW)
See Product Availability
table below.
Lamp Type
32 4', T8: 32, 30,
28 or 25 Watt
–
Ballast
NOTE: See Technical
Section for other ballast
options.
E Electronic T8,
Instant Start
3E 3-Lamp Electronic
T8, Instant Start
4E 4-Lamp Electronic
T8, Instant Start
Voltage
U 120V-277V
347 347V
OPTIONS
EL Emergency
Battery
Pack
NYC NYC
Compliant
NYCU NYC
Compliant,
Union
Label
Accessories
(Order Separately)
VDR
GLRK
S18
SS18
Product Availability
23/4"
33/4"
No. of
lamps
Lamp Type
WIDTH
LENGTH
HEIGHT
4' VRN
1
2
32
32
51/8"
51/8"
48¼"
48¼"
33/4"
33/4"
4' VRM
2
32
85/16"
48¼"
23/4"
4' VRW
3
4
32
32
125/16"
125/16"
48¼"
48¼"
23/4"
23/4"
Size
125/16"
VRW 3-Lamp
51/8"
VRN
23/4"
23/4"
85/16"
VRM
58
Tamper Resistant Screwdriver
Fast Blow Fuse Kit
18" Stem w/Canopy
18" 45° Swivel Stem w/Canopy
125/16"
VRW 4-Lamp
LHV
VersaBay® Fluorescent High Bay
Features
• Optical design provides one-for-one replacement
• Reflector options include uplight (recommended) or
• Advanced Thermal Management (ATM) provides
• Quick and simple hanging systems including chain,
400 watt metal halide high bays at half the energy
solid top with either narrow or wide distribution
• Industry leading 5-year warranty for up to 65ºC
INDUSTRIALS
optimized heat dissipation for cool ballast operation
in unconditioned spaces
tong, or aircraft cable mounting
• Rotary locking lampholders
• Access cover in channel for easy wiring access
ambient operation
• Easy center-ballast cover allows tool-less access to
• “Plug and play” occupancy sensor and cord and plug
• Extremely low profile - only 2" overall height
• UL listed 1598, cUL or CSA. Damp Location standard
accessories make installation simple to any standard
LHV fixture
electrical components without the removal of lamps,
reflectors, or hardware
Ordering Information
LHV
4
–
SIZE
4 4'
No. of Lamps
4 Four
6 Six
8 Eight
Model
LHV VersaBay®
Fluorescent
High Bay
Reflector
M4R 95% Reflective
Specular Aluminum
(Narrow Beam)
GW Gloss White (Wide Beam)
Lamp Type
32 4', T8: 32, 30,
28 or 25 Watt
54 4', T5HO: 54,
51, or 49 Watt
Accessories (order separately)
LHVTH Tong Hanger (Pair)
LHVWG4-4 Wireguard, White,
4-Lamp Fixture
LHVWG4-6 Wireguard, White,
6-Lamp Fixture
LHVWG4-8 Wireguard, White,
8-Lamp Fixture
LHVQM5 Aircraft Cable, 5' (Pair)
LHVQM10 Aircraft Cable, 10' (Pair)
LHVSPM5 Single Point Mounting,
LHVSP
LHVOS480
LHVOS1
LHVOS2
C6TL15-120
C6TL15-277
C6P15-120
–
–
Includes Pair of 5' Aircraft
Cables
Side Panels (Pair)
Occupancy Sensor1,
480V, One Relay
Occupancy Sensor1,
120/277/347V, One Relay
Occupancy Sensor1,
120/277/347V, Two Relays
Cord and Plug Kit (white),
6 ft., Twist Lock NEMA
L5-15P, 15 amp, 120V
Cord and Plug Kit (white),
6 ft., Twist Lock NEMA
L7-15P, 15 amp, 277V
Cord and Plug Kit (white),
6 ft., Straight Blade NEMA
5-15P, 15 amp, 120V
uplight
ST Solid Top
U Uplight
–
–
Voltage
U 120V-277V
347 347V
480 480V
Lamps installed
T8
FO730 3000K 75CRI
LHV4-454
FO735 3500K 75CRI
4EP (1) 4-Lamp Electronic T5HO,
FO741 4100K 75CRI
Programmed Start
FO750 5000K 75CRI
LHV4-654
T5HO
24EP (1) 2-Lamp and (1) 4-Lamp
Electronic T5HO, Programmed Start
F5830 3000K 85CRI
3EP (2) 3-Lamp and Electronic T5HO,
F5835 3500K 85CRI
Programmed Start
F5841 4100K 85CRI
LHV4-854
F5850 5000K 85CRI
(2)
4-Lamp
Electronic
T5HO,
4EP
Programmed Start
F5865 6500K 85CRI
LHV4-432
F51830 3000K 85CRI 51W
4EHL (1) 4-Lamp Electronic T8,
F51835 3500K 85CRI 51W
High Light Output, Instant Start
4100K 85CRI 51W
EPHL (2) 2-Lamp Electronic T8, High Light F51841
F51850 5000K 85CRI 51W
Output, Programmed Start
4EPHL (1) 4-Lamp Electronic T8, High Light F51865 6500K 85CRI 51W
Output, Programmed Start
F49830 3000K 85CRI 49W
LHV4-632
F49835 3500K 85CRI 49W
3EHL (2) 3-Lamp Electronic T8,
F49841 4100K 85CRI 49W
High Light Output, Instant Start
F49850 5000K 85CRI 49W
24EHL (1) 2-Lamp and (1) 4-Lamp
Electronic T8, High Light Output,
F49865 6500K 85CRI 49W
Ballast
NOTE: See Technical Section for other ballast
options.
Options
C6TL15_ 6' Cord and Twist-Lock™ Plug 15A
(Add Voltage: 1=120, 2=277)
C6TL20_ 6' Cord and Twist-Lock™ Plug 20A
(Add Voltage 1=120, 2=277)
C6P151 6' Cord and Straight Blade Plug 15A,
CA
CP
CAWG
CPWG
EL141
EL5H
F4C5
GLR
OS1
OS2
OS480
ODS1
ODS2
Instant Start
3EPHL (2) 3-Lamp Electronic T8, High Light
Output, Programmed Start
LHV4-832
4EHL (2) 4-Lamp Electronic T8, High Light
Output, Instant Start
4EPHL (2) 4-Lamp Electronic T8, High Light
Output, Programmed Start
ODS480
SP
WG
NYC
NYCU
120V
Clear Acrylic Lens2
Clear Polycarbonate Lens2
Clear Acrylic Lens and Flat Wire Guard2
Clear Polycarbonate Lens and Flat Wire
Guard2
1100-1400 Lumens, T8 1-Lamp
725-1250 Lumens, T5HO 1-Lamp
4-Conductor Cord
Fast Blow Fuse
Factory Installed Occupancy Sensor,
120/277/347V, One Relay, All Lamps
On/Off1
Factory Installed Occupancy Sensor,
120/277/347V, Two Relay, Two Ballasts
Controlled Separately1
Factory Installed Occupancy Sensor,
480V, One Relay, All Lamps On/Off1
Factory Installed Occupancy Sensor
with Daylight Harvesting Photosensor,
120/277/347V, One Relay, All Lamps
On/Off1
Factory Installed Occupancy Sensor
with Daylight Harvesting Photosensor,
120/277/347V, Two Relay, Two Ballasts
Controlled Separately1
Factory Installed Occupancy Sensor with
Daylight Harvesting Photosensor, 480V,
One Relay, All Lamps On/Off1
Side Panels Installed2
Flat Wire Guard2
NYC Compliant
NYC Compliant, Union Made
1
Use programmed start ballast. Not recommended for use with instant start. For more occupancy/daylight harvesting sensor accessories see page 98.
Side panels increase height to 2⅞".
2
Product Availability
MODEL
SOURCE
NO. OF
LAMPS
UPLIGHT
OPTIONS
LAMP
TYPE
WIDTH
LENGTH
HEIGHT2
LHV4
T5HO, T8
T5HO, T8
T5HO, T8
4
6
8
U, ST
U, ST
U, ST
32, 54
32, 54
32, 54
163/16"
205/8"
25"
48"
48"
48"
2"
2"
2"
59
LHV/LHA
Shielding System
Features
2
•
INDUSTRIALS
1
Order shielding system separately when
ordering a stocked LHV or LHA fixture or
if shielding is needed on an existing LHV
installation
•
Easy to install shielding assembly can be
used with any standard VersaBay® fixture
•
100% clear acrylic and polycarbonate lens
are available
•
Side panels and end jaws are constructed
of formed code gauge steel
1. Side panels screw to standard end caps and provide added
structural rigidity as well as side support for lens and wire
guard.
•
Wire guard is constructed of 12 gauge wire
and has a wire spacing of 2" square
•
Extremely low profile
•
Tool-less entry into lamp and ballast
compartment allows for easy serviceability
•
Addition of shielding adds less than 1" to
overall depth
•
Industry’s only lensed fluorescent high bay
with high ambient warranty, 55°C for T5HO
and 40°C for T8 applications (LHA only)
Ordering Information
2. The end jaw securely attaches to the end cap and side
panels. Each end jaw rotates for easy access to the lens
and wire guard but locks in place when returned to its
closed position. Once in place, the lens and wire guard is
supported on all four sides.
2"
4-Lamp
163/16"
2"
20⅝"
6-Lamp
2"
25"
8-Lamp
3
Cross sections With Shielding
3. The end jaw rotates down without the use of any tools.
163/16"
2⅞"
4-Lamp
4
20⅝"
2⅞"
6-Lamp
25"
2⅞"
8-Lamp
4. The lens or wire guard simply slides out once jaw is rotated.
*There is no change to overall length with shielding installed.
Ordering Information (Complete Kit)
LHV
S
Model
Shielding
S Shielding
LHV VersaBay®
Fluorescent
High Bay
LHV Shielding kit contents**
–
No. of Lamps In
Cross Section
4 Four
6 Six
8 Eight
Kit contains two or more of these components:
Shielding1
CA Clear Acrylic Lens
CP Clear Polycarbonate Lens
CAWG Clear Acrylic Lens and Flat
Wire Guard
CPWG Clear Polycarbonate Lens
1
60
Includes side panels and end jaw (pair).
and Flat Wire Guard
WG Flat Wire Guard
LHV*SPJ
LHV*FWG
LHV*CA
LHV*CP
Side Panels and End Jaw (Pair) for 4, 6, or 8-Lamp
Flat Wire Guard for 4, 6, or 8-Lamp
Clear Acrylic Lens for 4, 6, or 8-Lamp
Clear Polycarbonate Lens for 4, 6, or 8-Lamp
* Replace with 4, 6, or 8. For Example: LHV6CA
** Shielding kit options are packaged separately.
LHA
Industrial Fluorescent High Bay
Features
Compact, open body linear high bay offers
energy efficient performance
•
Rotary locking lampholders secure lamp in
position and conceal contacts
•
Easy center-ballast cover allows tool-less
access without lamp or reflector removal
•
•
Extremely low profile—only 2" overall
height allows fixture to be installed
without concern about obstructions
Easy field-installed accessories or factoryinstalled options for sensors, wire guards,
lenses
•
Reflector options include uplight
(recommended) or solid top with either
narrow or wide distribution
Quick and simple hanging systems
including chain, tong, pipe hanger, or
aircraft mounting
•
Suitable for operation in up to a 450°C
(1130°F) ambient environment
•
INDUSTRIALS
•
Ordering Information
LHA
4
–
SIZE
4 4'
–
–
Lamp Type
32 4', T8: 32
Watt
54 4', T5HO: 54
–
uplight
ST Solid Top
U Uplight
Ballast Factor
BLANK 0.88BF for T8, 1.00BF
for T5HO
HL 1.18BF High Lumen T8,
Watt
Model
LHA Industrial
Reflector
N Narrow Distribution
W Wide Distribution
Fluorescent
High Bay
No. of Lamps
4 Four
6 Six
Accessories (order separately)
LHVTH Tong Hanger (Pair)
LHVWG4-4 Wireguard, White,
LHVWG4-6
LHVWG4-8
LHVQM5
LHVQM10
LHVSPM5
LHVSP
LHVOS480
LHVOS1
LHVOS2
C6TL15-120
C6TL15-277
C6P15-120
4-Lamp Fixture
Wireguard, White,
6-Lamp Fixture
Wireguard, White,
8-Lamp Fixture
Aircraft Cable, 5' (Pair)
Aircraft Cable, 10' (Pair)
Single Point Mounting,
Includes Pair of 5' Aircraft
Cables
Side Panels (Pair)
Occupancy Sensor1,
480V, One Relay
Occupancy Sensor1,
120/277/347V, One Relay
Occupancy Sensor1,
120/277/347V, Two Relays
Cord and Plug Kit (white),
6 ft., Twist Lock NEMA
L5-15P, 15 amp, 120V
Cord and Plug Kit (white),
6 ft., Twist Lock NEMA
L7-15P, 15 amp, 277V
Cord and Plug Kit (white),
6 ft., Straight Blade NEMA
5-15P, 15 amp, 120V
–
N/A for T5HO Lamp Type
Ballast
LHA4-454
EP (2) 2-Lamp Electronic T5HO,
Programmed Start
4EP (1) 4-Lamp Electronic T5HO,
Programmed Start
LHA4-432
E (2) 2-Lamp Electronic T8, Instant
Start
EP (2) 2-Lamp Electronic T8,
Programmed Start
4E (1) 4-Lamp Electronic T8, Instant
Start
4EP (1) 4-Lamp Electronic T8,
Programmed Start
LHA4-654
24EP (1) 2-Lamp & (1) 4-Lamp
Options
C6TL15_ 6' Cord and Twist-Lock™ Plug 15A
Voltage
U 120V-277V
347 347V
480 480V
C6TL20_ 6' Cord and Twist-Lock™ Plug 20A
Lamps installed
C6P151 6' Cord and Straight Blade Plug
T8
FO835 32 Watt, 82 CRI,
3500K
F0841 32 Watt, 82 CRI,
4100K
FO850 32 Watt, 82 CRI,
5000K
T5HO
F554835 54 Watt, 85 CRI,
3500K
F554841 54 Watt, 85 CRI,
4100K
F554850 54 Watt, 85 CRI,
5000K
Electronic T5HO, Programmed
Start
LHA4-632
3E (2) 3-Lamp Electronic T8, Instant
Start
3EP (2) 3-Lamp Electronic T8,
Programmed Start
24E (1) 2-Lamp & (1) 4-Lamp
Electronic T8, Instant Start
24EP (1) 2-Lamp & (1) 4-Lamp
Electronic T8, Programmed Start
(Add Voltage: 1=120, 2=277)
(Add Voltage 1=120, 2=277)
15A, 120V
CA Clear Acrylic Lens2
CP Clear Polycarbonate Lens2
CAWG Clear Acrylic Lens and Flat Wire
CPWG
SP
WG
TC
EL141
EL5H
F3C5
F4C5
OS1
OS2
OS480
ODS1
ODS2
ODS480
1
Use programmed start ballast. Not recommended for use with instant start. For more occupancy/daylight
harvesting sensor accessories see page 98.
2
Side panels increase height to 2⅞".
Guard2
Clear Polycarbonate Lens and Flat
Wire Guard2
Side Panels Installed2
Flat Wire Guard2
Top Cover
1100-1400 Lumens, T8 1-Lamp
725-1250 Lumens, T5HO 1-Lamp
3-Conductor Cord
4-Conductor Cord
Factory Installed Occupancy
Sensor, 120/277/347V, One
Relay, All Lamps On/Off1
Factory Installed Occupancy
Sensor,
120/277/347V, Two Relay, Two
Ballasts Controlled Separately1
Factory Installed Occupancy
Sensor, 480V, One Relay, All
Lamps On/Off1
Factory Installed Occupancy
Sensor with Daylight Harvesting
Photosensor, 120/277/347V, One
Relay, All Lamps On/Off1
Factory Installed Occupancy
Sensor with Daylight Harvesting
Photosensor, 120/277/347V, Two
Relay, Two Ballasts Controlled
Separately1
Factory Installed Occupancy
Sensor with Daylight Harvesting
Photosensor, 480V, One Relay, All
Lamps On/Off1
Product Availability
MODEL
SOURCE
NO. OF
LAMPS
UPLIGHT
OPTIONS
LAMP
TYPE
WIDTH
LENGTH
HEIGHT2
LHA
T5HO, T8
T5HO, T8
4
6
U, ST
U, ST
32, 54
32, 54
163/16"
205/8"
48"
48"
2"
2"
61
LHR
Ultra-Efficient Fluorescent High Bay
Features
INDUSTRIALS
•
Specifically contoured specular
reflectors drive light downward for
excellent high bay performance
•
Employs T5 or T8 technology
•
Optional uplight, feed cords and
plugs, or occupancy sensors to fit most
applications
•
Efficiency up to 99.3%
•
Choice of lumen packages and
distribution curves replace and improve
upon traditional 250W to 400W metal
halide high bays
•
Fast and flexible GLH adjustable cable
option provides simplified mounting in
virtually any installation, whether new
construction or retrofit
•
Rotary locking lampholders keep T5
lamps secure
•
UL listed 1598, cUL or CSA. Damp
Location standard
Ordering Information
LHR
4
–
Model
LHR Ultra-
–
No. of Lamps
4 Four
6 Six
Efficient
Fluorescent
High Bay
SIZE
4 48"
(Nominal)
–
Reflector
M4R 95% Reflective
Lamp Type
28 4', T5: 28 Watt
32 4', T8: 32, 30,
Specular Aluminum
(Narrow Beam)
LS Specular Anodized
Aluminum
(Narrow Beam)
GW Gloss White Powder
Coat (Wide Beam)
–
uplight
ST Solid Top
Voltage
U 120V-277V
347 347V
480 480V
(No uplight)
U Uplight,
12%
Options
F5830
F5835
F5841
F5850
FO830
F0835
F0841
LHHB
C6TL15_
30K 85CRI T5 or T5HO Lamps Installed
35K 85CRI T5 or T5HO Lamps Installed
41K 85CRI T5 or T5HO Lamps Installed
50K 82CRI T5HO Lamps Installed
30K 82CRI T8 Lamps Installed
35K 82CRI T8 Lamps Installed
41K 82CRI T8 Lamps Installed
Universal Hanger Bracket
6' Cord and Twist-Lock™ Plug 15A
(Add Voltage: 1=120, 2=277)
C6TL20_ 6' Cord and Twist-Lock™ Plug 20A
(Add Voltage 1=120, 2=277)
C6P15_ 6' Cord and Straight Blade Plug 15A
(Add Voltage: 1=120, 2=277)
EL Emergency Battery Pack
F3C* 3-Conductor Feed Cord Wired to Fixture
F4C* 4-Conductor Feed Cord Wired to Fixture
FSCA Flush Steel Door with Clear Acrylic Lens
FSCP Flush Steel Door with Clear Polycarbonate Lens
FSCAWG Flush Steel Door with Clear Polycarbonate
Lens and Flat Wire Guard
GLR Fast Blow Fuse
LHTD Safety Tether for Door Assembly, Fastened
to Fixture Housing
PAF Paint After Fabrication
*Replace asterisk above with length in feet – 5', 10', or
15'. For more options see Technical Section.
28 or 25 Watt
54 4', T5HO: 54
or 51 Watt
Accessories (order separately)
LHTF Fixture Safety Tether
LHHB- Universal Hanger Bracket Kit
LHR4-4LT for 4-Lamp Fixture
LHHB- Universal Hanger Bracket Kit
LHR4-6LT for 6-Lamp Fixture
LHSH Metal Strut Hanger
GLH5 5' Adjustable Cable Kit*
GLH10 10' Adjustable Cable Kit*
GLH15 15' Adjustable Cable Kit*
LHRWG4K Wire Guard Kit for 4-Lamp (not
to be used with door frame)
LHRWG6K Wire Guard Kit for 6-Lamp (not
to be used with door frame)
OS1K Occupancy Sensor Kit,
120/277/347V, One Relay1
*Use with LHHB.
For more accessories see Technical Section.
1
Use programmed start ballast. Not
recommended for use with instant start. For
more occupancy/daylight harvesting sensor
accessories see page 98.
Ballast
NOTE: See Technical Section for other ballast options.
LHR4-454
EP (2) 2-Lamp Electronic T5HO, Programmed Start
4EP (1) 4-Lamp Electronic T5HO, Programmed Start
LHR4-654
EP (3) 2-Lamp Electronic T5HO, Programmed Start
3EP (2) 3-Lamp Electronic T5HO, Programmed Start
24EP (1) 2-Lamp and (1) 4-Lamp Electronic T5HO, Programmed
Start
LHR4-432
E (2) 2-Lamp Electronic T8, Instant Start
EP (2) 2-Lamp Electronic T8, Programmed Start
4E (1) 4-Lamp Electronic T8, Instant Start
4EP (1) 4-Lamp Electronic T8, Programmed Start
LHR4-632
3E (2) 3-Lamp Electronic T8, Instant Start
3EP (2) 3-Lamp Electronic T8, Programmed Start
24E (1) 2-Lamp and (1) 4-Lamp Electronic T8, Instant Start
24EP (1) 2-Lamp & (1) 4-Lamp Electronic T8, Programmed Start
3EHL (2) 3-Lamp Electronic T8, High Light Output, Instant Start
Product Availability
211⁄16"
17⅜"
LHR4-4
4½"
SOURCE
NO. OF
LAMPS
UPLIGHT
OPTIONS
LAMP TYPE
WIDTH
LHR4-4
T5, T8
4
ST, 6, 12
28, 32, 54
LHR4-6
T5, T8
6
ST, 6, 12
28, 32, 54
LENGTH
HEIGHT
173/18"
48"
211/16"
243/16"
48"
4½"
Note: Not intended for surface mounting. Provide a minimum of 3" clearance.
243⁄16"
LHR4-6
62
MODEL
LHR Narrow
Narrow Fluorescent High Bay
Features
Extremely efficient fluorescent luminaire
replaces HID in retail and industrial
applications
•
Open optics or optional white cross
baffle softly diffuses light
•
Excellent vertical footcandles
•
Solid top or optional 15% uplight
•
Rounded edges and corners for safe
handling and installation
•
UL listed 1598, cUL or CSA. Damp
Location standard
INDUSTRIALS
•
Ordering Information
LHR
–
Model
LHR Narrow
–
No. of Lamps
2 Two
3 Three
Fluorescent
High Bay
–
Reflector
M4R 95% Reflective
Specular Aluminum
LS Specular Anodized
See Product Availability
table below.
uplight
U 15% Uplight
ST Solid Top
Aluminum
–
Voltage
U 120V-277V
347 347V
480 480V
GW Gloss White Powder
Coat
SIZE
4 48"
8 96"
Lamp Type
28 4', T5: 28 Watt
32 4', T8: 32, 30, 28 or
25 Watt
54 4', T5HO: 54 or 51 Watt
Accessories
GLH5
GLH10
GLH15
LHRNWG
OS1K
5' Adjustable Cable Kit
10' Adjustable Cable Kit
15' Adjustable Cable Kit
Wire Guard for Narrow Body LHR1
Occupancy Sensor Kit,
120/277/347V, One Relay1
Ballast
NOTE: See Technical Section for other ballast options.
E Electronic T8, Instant Start
3E 3-Lamp Electronic T8, Instant Start
24E (1) 2-Lamp and (1) 4-Lamp Electronic T8,
Instant Start
3EHL 3-Lamp Electronic T8, 1.2 Ballast Factor,
High Light Output, Instant Start
EP Electronic T5 or T8, Programmed Start
3EP 3-Lamp Electronic T5HO (or T8), Programmed
Start
24EP (1) 2-Lamp and (1) 4-Lamp Electronic T5HO
or T8, Programmed Start
Options
F0841 41K 82CRI 32W T8 Lamps Installed
F5841 41K 85CRI T5 or T5HO Lamps
Installed
F3C5 3-Conductor 5' Feed Cord Wired
to Fixture
F3C10 3-Conductor 10' Feed Cord Wired
to Fixture
F3C15 3-Conductor 15' Feed Cord Wired
to Fixture
Fast Blow Fuse
White Cross Baffle
NYC Compliant3
NYC Compliant, Union Label3
For more options see Technical Section.
GLR
WCB
NYC
NYCU
1
N/A when used with WCB option.
Use programmed start ballast. Not recommended for use with instant start.
For more occupancy/daylight harvesting sensor accessories see page 98.
3
2-Lamp option only.
2
Product Availability
NO. OF LAMPS
IN CROSS
SECTION
NO. OF
LAMPS IN
FIXTURE
LAMP TYPE
WIDTH
LENGTH
HEIGHT
LHR4
2
3
2
3
28, 32, 54
28, 32, 54
9¾"
9¾"
481/16"
481/16"
411/16"
411/16"
LHR8
2
3
4
6
28, 32, 54
28, 32, 54
9¾"
9¾"
961/16"
961/16"
411/16"
411/16"
MODEL
411⁄16"
9¾"
LHR4-332
63
LHC
Enclosed and Gasketed Linear High Bay
Features
INDUSTRIALS
•
Extremely efficient fluorescent luminaire
replaces HID in retail and industrial
applications
•
Highly specular contoured reflectors drive
light down to provide excellent vertical
footcandles
•
Battery pack option (EL) provides instant-on
emergency illumination (not available for wet
location)
•
Fully sealed housing for use in Class I
Cleanroom applications
•
Anodized extruded aluminum door frame
•
One-piece, 18 gauge stainless or cold-rolled
steel doors available
•
Mounting bracket pre-installed for surface or
cable mounting
•
UL listed 1598, cUL or CSA. Damp Location
standard, Wet Location option
Ordering Information
LHC
–
Model
LHC Enclosed and
Gasketed
Linear High
Bay
–
–
No. of Lamps
4 Four
6 Six
See Product Availability
table below.
Door style
FA White Flush
Aluminum
Lamp Type
28 4', T5: 28 Watt
32 4', T8: 32, 30,
28 or 25 Watt
54 4', T5HO: 54
or 51 Watt
ACCESSORIES
(order separately)
LHHB Universal Hanger Bracket Kit
Steel Door
FSS Flush One-Piece
Shielding
(Required for GLH cable kit)
Options
Ballast
Clear Acrylic
Clear Polycarbonate
Pattern 12 Acrylic Lens
Pattern 12 Acrylic Lens
0.0125" Nominal
A15 Pattern 15 Acrylic Lens,
0.200" Nominal
A19 Pattern 19 Acrylic Lens,
0.156" Nominal
GLH5 5' Adjustable Cable Kit*
GLH10 10' Adjustable Cable Kit*
GLH15 15' Adjustable Cable Kit*
Voltage
U 120V-277V
347 347V
480 480V
Specular Aluminum
(S/MH = 1.0)
LS Specular Anodized
Aluminum
(S/MH = 1.0)
GW Gloss White Powder
Coat (S/MH - 1.4)
FCS Flush One-Piece
CA
CP
A12
A12125
–
Reflector
M4R 95% Reflective
Stainless Steel
Door
SIZE
164 16" × 4'
24 2' × 4'
–
NOTE: See Technical Section for other
ballast options.
E Electronic T8, Instant Start
4E 4-Lamp Electronic T8,
Instant Start
EHL Electronic T8, High Light
Output, Instant Start
EP Electronic T5 or T8,
Programmed Start
4EP 4-Lamp Electronic T5HO or T8,
Programmed Start
24EP (1) 2-Lamp and (1) 4-Lamp
Electronic T5HO or T8,
Programmed Start
*Use with LHHB. For more accessories
see Technical Section.
FO730
FO735
FO741
FO830
F5835
30K 75CRI T8 Lamps Installed
35K 75CRI T8 Lamps Installed
41K 75CRI T8 Lamps Installed
30K 82CRI T8 Lamps Installed
35K 85CRI T5 or T5HO Lamps
Installed
F5841 41K 85CRI T5 or T5HO Lamps
Installed
F5850 50K 82CRI T5HO Lamps
Installed
EL Emergency Battery Pack
(Not available for wet
locations)
GLR Fast Blow Fuse
WG Wire Guard (FA Door Frame Required)*
WL Wet Location
*Not available with FCS or FSS door.
Product Availability
5"
5"
24"
LHC24
64
16"
LHC164
MODEL
NO. OF
LAMPS IN
FIXTURE
LAMP TYPE
WIDTH
LENGTH
HEIGHT
LHC164
4
28, 32, 54
16"
48"
5"
LHC24
6
28, 32, 54
24"
48"
5"
LHE
Efficient High Bay
Features
High bay performance at an affordable price
•
White cross baffle or prismatic acrylic lens
options provide lamp shielding and enhanced
aesthetics
•
Wire guards or cages available for impact
protection
•
Rotary locking lampholders
•
Can be row mounted
•
Efficiency up to 95%
•
Optional uplight, feed cords and plugs, or
occupancy sensors to fit most applications
•
Furnished standard with Universal Hanger
Bracket for mounting with jack chain or cable
•
Fast and flexible GLH adjustable cable option
provides simplifies mounting in virtually any
application, whether new construction or retrofit
•
UL listed 1598, cUL or CSA. Damp Location
standard
INDUSTRIALS
•
Shown with WCB option.
Ordering Information
LHE
–
Model
LHE Efficient
SIZE
4 48"
8 96"
High Bay
(LHEM only)
–
No. of Lamps
2 Two (LHEM only)
4 Four
6 Six (LHEW only)
See Product
Availability table
below.
BODY
M Medium Body, 915⁄16"
W Wide Body, 155⁄16"
LHHB
GLH5
GLH10
GLH15
LHTF
LHTWCB
LHEMWG
LHEWWG
LHEMCG
LHEWCG
OS1K
Universal Hanger Bracket Kit
5' Adjustable Cable Kit*
10' Adjustable Cable Kit*
15' Adjustable Cable Kit*
Fixture Safety Tether
White Cross Baffle Safety Tether
Wire Guard for LHEM (Order Two for LHEM8)
Wire Guard for LHEW
Cage Guard for LHEM (Order Two for LHEM8)
Cage Guard for LHEW
Occupancy Sensor Kit, 120/277/347V,
One Relay1
*Use with LHHB.
For more accessories see Technical Section.
1
Shielding
Blank None
WCB White Steel Cross
uplight
ST Solid Top
(No uplight)
Baffle*
PA Prismatic Acrylic
Wraparound Lens*
*N/A with wire guard. May
be used with cage guard.
Lamp Type
28 4', T5: 28 Watt
32 4', T8: 32, 30, 28 or 25 Watt
54 4', T5HO: 54 or 51 Watt
ACCESSORIES
(order separately)
–
U Uplight
–
Voltage
U 120V-277V
347 347V
480 480V
Options
Ballast
NOTE: See Technical Section for other ballast
options.
E Electronic T8, Instant Start
3E 3-Lamp Electronic T8, Instant Start
4E 4-Lamp Electronic T8, Instant Start
24E (1) 2-Lamp and (1) 4-Lamp Electronic
T8, Instant Start
3EHL 3-Lamp Electronic T8, 1.2 Ballast Factor,
High Light Output, Instant Start
EP Electronic T5 or T8, Programmed Start
3EP 3-Lamp Electronic T5HO (6-Lamp only)
or T8, Programmed Start
4EP 4-Lamp Electronic T5HO or T8,
Programmed Start
24EP (1) 2-Lamp and (1) 4-Lamp Electronic
T5HO or T8, Programmed Start
F5830
F5835
F5841
F5850
C6TL15_
30K 85CRI T5 or T5HO Lamps Installed
35K 85CRI T5 or T5HO Lamps Installed
41K 85CRI T5 or T5HO Lamps Installed
50K 82CRI T5HO Lamps Installed
6' Cord and Twist-Lock™ Plug 15A
(Add Voltage: 1=120, 2=277)
C6TL20_ 6' Cord and Twist-Lock™ Plug 20A
(Add Voltage 1=120, 2=277)
C6P15_ 6' Cord and Straight Blade Plug 15A
(Add Voltage: 1=120, 2=277)
EL Emergency Battery Pack
F3C* 3-Conductor Feed Cord Wired to Fixture
F4C* 4-Conductor Feed Cord Wired to Fixture
GLR Fast Blow Fuse
LSR Specular Anodized Aluminum Insert
(solid top only)
M4R 95% Reflective Specular Aluminum
Insert (Solid Top Only)
PAF Paint After Fabrication
NYC NYC Compliant
NYCU NYC Compliant, Union Label
*Replace asterisk above with length in feet – 5', 10',
or 15'. For more options see Technical Section.
Use programmed start ballast. Not recommended for use with instant start.
For more occupancy/daylight harvesting sensor accessories see page 98.
Product Availability
NO. OF LAMPS IN
CROSS SECTION
NO. OF
LAMPS IN
FIXTURE
LAMP TYPE
WIDTH
LENGTH
HEIGHT
LHEM4
2
4
2
4
28,32, 54
28, 54
915/16"
915/16"
48"
48"
2⅞"
2⅞"
LHEM8
2
4
4
8
28,32, 54
28, 54
915/16"
915/16"
96"
96"
2⅞"
2⅞"
LHEW4
4
6
4
6
28, 32, 54
28, 32, 54
155/16"
155/16"
48"
48"
2⅞"
2⅞"
MODEL
2⅞"
2⅞"
915⁄16"
LHEM
155⁄16"
LHEW 6-Lamp
2⅞"
155⁄16"
LHEW 4-Lamp
65
LHG
Recessed Fluorescent High Bay
Features
INDUSTRIALS
•
Linear fluorescent reflector technology
in a recessed troffer
•
Extremely efficient fluorescent luminaire
replaces HID in a variety of applications
•
Highly specular contoured reflectors
drive light down to provide excellent
vertical footcandles
•
Battery pack option (EL) provides
instant-on emergency illumination
•
Tool-free access to lamps and ballasts
•
UL listed 1598, cUL or CSA. Damp
Location standard
Ordering Information
LHG
24
Model
LHG Recessed
Fluorescent
High Bay
–
–
No. of Lamps in
cross section
4 Four
6 Six
See Product
Availability table
below.
SIZE
24 2' × 4'
Ceiling Type
G Inverted T-Bar
F Flange
M Fit-In Trim
SM Surface Mount
Lamp Type
28 4', T5: 28 Watt
32 4', T8: 32, 30,
28 or 25 Watt
54 4', T5HO: 54
or 51 Watt
Door style
Blank None
FS Flush Steel
FA Flush
Aluminum
RA Regressed
Aluminum
–
Reflector
M4R 95% Reflective
A12125
A15
A19
Voltage
U 120V-277V
347 347V
480 480V
Specular Aluminum
(S/MH = 1.0)
LS Specular Anodized
Aluminum
(S/MH = 1.0)
GW Gloss White Powder
Coat (S/MH - 1.4)
Shielding
Blank
CA
CP
CAWG
CPWG
ACCESSORIES
(order separately)
OS1K Occupancy Sensor Kit,
–
Lamps Installed
Lamps Installed
F5830 30K 85CRI T5
NOTE: See Technical Section for other ballast options.
F5835
T8
E (2) 2-Lamp Electronic T8, Instant Start
EP (2) 2-Lamp Electronic T8, Programmed Start
EHL (2) 2-Lamp Electronic T8 High Light Output,
Instant Start
4E (1) 4-Lamp Electronic T8, Instant Start
4EP (1) 4-Lamp Electronic T8, Programmed Start
4EHL (1) 4-Lamp Electronic T8 High Light Output,
F5841
F5850
EL
Instant Start
3E (2) 3-Lamp Electronic T8, Instant Start
3EP (2) 3-Lamp Electronic T8, Programmed Start
3EHL (2) 3-Lamp Electronic T8 High Light Output,
Instant Start
24E (1) 2-Lamp and (1) 4-Lamp Electronic T8,
Instant Start
24EP (1) 2-Lamp and (1) 4-Lamp Electronic T8,
Programmed Start
24EHL (1) 2-Lamp and (1) 4-Lamp Electronic T8 High
Light Output, Instant Start
120/277347V, One Relay*1
Lamps Installed
FO735 35K 75CRI T8
FO741 41K 75CRI T8
Ballast
None
Clear Acrylic
Clear Polycarbonate
Clear Acrylic with
White Wire Guard
Clear Polycarbonate with
White Wire Guard
Pattern 12 Acrylic Lens,
0.125" Nominal
Pattern 15 Acrylic Lens,
0.200" Nominal
Pattern 19 Acrylic Lens,
0.156" Nominal
Options
FO730 30K 75CRI T8
GLR
PAF
or T5HO Lamps
Installed
35K 85CRI T5
or T5HO Lamps
Installed
41K 85CRI T5
or T5HO Lamps
Installed
50K 82CRI T5HO
Lamps Installed
Emergency
Battery Pack
(Not available
for wet
locations)
Fast Blow Fuse
Paint After
Fabrication
T5HO
EP (2 or 3) 2-Lamp T5 or (2) 2-Lamp T5HO,
Programmed Start
4EP (1) 4-Lamp T5HO, Programmed Start
24EP (1) 2-Lamp and (1) 4-lamp T5HO,
*Use programmed start ballast. Not recommended for use with instant start.
For more occupancy/daylight harvesting sensor accessories see page 98.
1
Only to be used in surface mount applications.
Programmed Start
Product Availability
5⅞"
5¾"
24"
LHG24-6
Surface
66
24"
LHG24-6
Recessed
MODEL
NO. OF
LAMPS
LAMP TYPE
WIDTH
LENGTH
HEIGHT
LHG
4
28, 32, 54
24"
48"
5"
LHG
6
28, 32, 54
24"
48"
5"
LHB
High-Performance Shielded High Bay
Features
Optimized to improve upon HID high and low
bay fixtures in a wide variety of applications
•
Rotary locking lampholders keep lamps
secure
•
Employs and enhances T5 technology to its
fullest advantage
•
Asymmetric and double wall wash available
for higher vertical footcandles
•
Ultra-high efficiency up to 98.7%
•
•
Precision “Brio” T5-dedicated louvers employ
accurate contours to drive light downward
Fast and flexible GLH adjustable cable system
adapts to virtually any requirement, whether
new construction or retrofit
•
Enhanced aesthetics ideal for retail, offices,
or lobbies
•
UL listed 1598, cUL or CSA. Damp Location
standard
•
Optional uplight
INDUSTRIALS
•
Ordering Information
LHB
2
–
Model
LHB High-
Performance
Shielded
High Bay
No. of Lamps
2 Two
Louver finish
M4R 95% Reflective
Voltage
U 120V-227V
347 347V
U Uplight 15%
Aluminum
or 25 Watt
54 4', T5HO: 54 Watt
–
(No uplight)
MA Matte Anodized
Lamp Type
28 4', T5: 28 Watt
32 4', T8: 32, 30, 28
–
uplight
ST Solid Top
Specular Aluminum
See Product
Availability
table below.
SIZE
4 48" (Nominal)
8 96" (Nominal)
–
–
Cell configuration
26 2 Cells Wide by 6
Cells Long (4')
212 2 Cells Wide by 12
Cells Long (8')
Ballast
NOTE: See Technical Section for other
ballast options.
E Electronic T8, Instant Start
EP Electronic T5,
Programmed Start
4EP 4-Lamp Electronic T5HO (N/A
347V)
ACCESSORIES
(Order separately)
LHTF
GLH5
GLH10
GLH15
OS1K
Fixture Safety Tether
5' Adjustable Cable Kit
10' Adjustable Cable Kit
15' Adjustable Cable Kit
Occupancy Sensor Kit,
120/277/347V, One Relay1
For more accessories see pages 96-99.
1
Options
FO830
FO835
FO841
F5830
30K 82CRI T8 Lamps Installed
35K 82CRI T8 Lamps Installed
41K 82CRI T8 Lamps Installed
30K 85CRI T5 or T5HO Lamps
Installed
F5835 35K 85CRI T5 or T5HO Lamps
Installed
F5841 41K 85CRI T5 or T5HO Lamps
Installed
F5850 50K 82CRI T5HO Lamps
Installed
1WW Asymmetric Wall Wash
2WW Double Wall Wash
C6TL15_ 6' Cord and Twist-Lock™ Plug 15A
(Add Voltage: 1=120, 2=277)
C6TL20_ 6' Cord and Twist-Lock™ Plug
20A (Add Voltage 1=120, 2=277)
C6P15_ 6' Cord and Straight Blade
Plug 15A (Add Voltage: 1=120,
2=277)
EL Emergency Battery Pack
F3C* 3-Conductor Feed Cord Wired
to Fixture
F4C* 4-Conductor Feed Cord Wired
to Fixture
GLR Fast Blow Fuse
NYC NYC Compliant
NYCU NYC Compliant, Union Label
*Replace asterisk above with length in
feet – 5', 10', or 15'. For more options see
Technical Section.
Use programmed start ballast. Not recommended for use with instant start.
For more occupancy/daylight harvesting sensor accessories see page 98.
Product Availability
NO. OF LAMPS IN
CROSS SECTION
NO. OF LAMPS
IN FIXTURE
LAMP
TYPE
WIDTH
LENGTH
HEIGHT
LHB4
2
2
2
2
28, 54
32
73/16"
73/16"
46⅝"
48¾"
3"
3⅞"
LHB8
2
2
4
4
28, 54
32
73/16"
73/16"
933/16"
96¾"
3"
3⅞"
MODEL
3⅞"
3"
73⁄16"
T5
73⁄16"
T8
Note: Not intended for surface mounting. Provide a minimum of 3" clearance.
67
IC
Premium Turret Industrial
INDUSTRIALS
Features
•
Specification grade, heavy duty, one-piece
steel housing
•
Easy installation. Fully assembled. Ships in
one carton
•
Optional deep “V” reflector provides 35°
crosswise shielding with T8 lamps and 39°
shielding with T12 lamps
•
Textile mill option eliminates upturned edges
on the reflector to inhibit the accumulation
of lint and dust
•
White powder coat finish painted after
fabrication
•
Embossed ribs and aperture edges provide
superior rigidity
•
Available with 10% uplight or solid top for
100% downlight
•
Heavy gauge metal spring loaded turret style
sockets provide excellent lamp retention
•
Optional full end plates
•
UL listed 1598, cUL or CSA. Damp Location
standard
Ordering Information
IC
–
Model
IC Premium
–
No. of Lamps in
Cross Section
2 Two
3 Three
4 Four
Turret
Industrial
REFLECTOR TYPE
U Apertured 10% Uplight Reflector
ST Solid Top 0% Uplight Reflector1
VR Deep V Apertured Uplight
Lamp Type
32 4', T8: 32, 30,
48HO
96
96T8
96HO
96T8HO
Voltage
U 120V-277V
347 347V
28 or 25 Watt
4', T12: 60 Watt
8', T12: 75 or
60 Watt
8', T8: 59 Watt
8', T12: 110 or
95 Watt
8', T8: 86 Watt
Options
BC1 Branch Circuit Wiring Single
ICFC
ICNC
EL
GLR
GMF
RIF
NYC
NYCU
Reflector (2-Lamp only)
TU 10% Uplight Textile Reflector
TST Solid Top Textile Reflector1
1
Not recommended with HO units.
See Product
Availability table
below.
SIZE
4 4'
8 8'
–
–
Ballast
NOTE: See Technical Section for other ballast options.
E Electronic, Instant Start
3E 3-Lamp Electronic T8 (32W), Instant Start
4E 4-Lamp Electronic T8 (32W), Instant Start
EP Electronic, Programmed Start
LE Energy Saving Magnetic T12 (1-Lamp 48HO only)
1
Use programmed start ballast. Not recommended for use with instant start.
For more occupancy/daylight harvesting sensor accessories see page 98.
Circuit (For more branch circuit
wiring options see page 113)
Full End Caps
No End Caps (Row mounting)
Emergency Battery Pack
Fast Blow Fuse
Slow Blow Fuse
Radio Interference Filter
NYC Compliant
NYC Compliant, Union Label
Accessories (Order Separately)
ICWG4 4' Wire Guard
ICFSA12 Steel Door with A12 Lens
ICWCB White Cross Baffle for Std. Reflector
ICVWCB White Cross Baffle for “V” Reflector
ICRC Rod Clamp Hanger
ICBC Box/Conduit Clamp Hanger
ICCN Channel Connector
ICHC Chain Hanger Assembly
ICAC Reflector Aligner
OS1K Occupancy Sensor Kit,
120/277/347V, One Relay1
Product Availability
6¾"
139/16"
2-Lamp
Standard Reflector
ICWCB
ICRC
68
NO. OF LAMPS IN
CROSS SECTION
NO. OF
LAMPS IN
FIXTURE
LAMP TYPE
WIDTH
LENGTH
HEIGHT
4'
(Standard
Reflector)
2
2
3
4
2
2
3
4
32
48HO
32
32
139⁄16"
139⁄16"
139⁄16"
139⁄16"
49⅛"
49⅛"
49⅛"
49⅛"
6¾"
6¾"
6¾"
6¾"
4' (Deep V
Reflector)
2
2
2
2
32
48HO
139⁄16"
139⁄16"
49⅛"
49⅛"
6¾"
6¾"
ICVWCB
8'
(Standard
Reflector)
2
2
3
3
4
4
2
6
3
4
32
96, 96T8, 96HO, 96T8HO
32
96, 96T8, 96HO, 96T8HO
59
139⁄16"
139⁄16"
139⁄16"
139⁄16"
139⁄16"
98¼"
98¼"
98¼"
98¼"
98¼"
6¾"
6¾"
6¾"
6¾"
6¾"
ICBC
8' (Deep V
Reflector)
4
2
2
4
4
2
96, 96T8, 96HO, 96T8HO
32
96, 96T8, 96HO, 96T8HO
139⁄16"
139⁄16"
139⁄16"
98¼"
49⅛"
49⅛"
6¾"
6¾"
6¾"
SIZE
6¾"
139/16"
2-Lamp
Deep V Reflector
KL
Premium Industrial
Features
Heavy gauge steel housing with longitudinal
ribs
•
Die embossed reflector with ribs
•
Wide variety of reflectors available including
specular, deep V, and solid top
•
Standard reflector has smooth extruded
apertures with 15% uplight
•
Spring loaded turret lampholders
•
Individual or continuous row mounting
•
Channel ends double as joiners
•
All parts are treated with a five stage
phosphate bonding process and finished with
a baked white enamel
•
UL listed 1598, cUL or CSA. Damp Location
standard
INDUSTRIALS
•
Ordering Information
KL
–
Model
KL Premium
–
No. of Lamps
2 Two
3 Three
4 Four
Industrial
See Product
Availability
table below.
SIZE
4 4'
8 8'
16 16' (Two
housing)
96
96T8
96HO
96T8HO
1
REFLECTOR TYPE
U Apertured Uplight Reflector (Std.)
SLR Apertured Specular
(95% Reflector) Finish
SRST Specular Reflector, Solid Top1
ST Solid Top1
VR Deep V Apertured Uplight
Reflector (2-Lamp only)*
1
Not recommended with HO units.
* Solid top not available.
Lamp Type
28 4', T5: 28 Watt
32 4', T8: 32, 30,
48HO
54
–
–
28 or 25 Watt
4', T12: 60 Watt
4', T5HO: 54 or
51 Watt
8', T12: 75 or 60
Watt
8', T8: 59 Watt
8', T12: 110 or
95 Watt
8', T8: 86 Watt
Voltage
U 120V-277V
347 347V
Ballast
NOTE: See Technical Section for other ballast options.
E Electronic, Instant Start
3E 3-Lamp Electronic T8 (32W), Instant Start
4E 4-Lamp Electronic T8 (32W), Instant Start
EP Electronic, Programmed Start
24E (1) 2-Lamp and (1) 4-Lamp Electronic T8 (32W), Instant Start
3EP 3-Lamp Electronic T5HO or T8, Programmed Start
4EP 4-Lamp Electronic T5HO (N/A 347V) or T8, Programmed Start
Instant Start ballasts available for 32, 96, and 96T8.
Programmed Start ballasts available for all except 96 and 96T8.
Options
BC1 Branch Circuit Wiring Single
Circuit (For more branch circuit
wiring options see page 113)
EL Emergency Battery Pack
GLR Fast Blow Fuse
GMF Slow Blow Fuse
PAF Paint After Fabrication
NYC NYC Compliant
NYCU NYC Compliant, Union Label
For more options see pages 96-112.
ACCESSORIES
(Order Separately)
S18 18" Stem, Canopy and
8" Aligner
SS18 18", 45º Swivel Stem and
Canopy
KHC 24" Chain Hanger Assembly
KLEC Full Depth Endcap (pair)
OS1K Occupancy Sensor Kit,
120V/277/347V, One Relay1
For more accessories see pages 96-99.
Use programmed start ballast. Not recommended for use with instant start. For more occupancy/daylight harvesting sensor accessories see page 98.
43⁄16"
Product Availability
SIZE
4'
8'
16'
(Two
housings)
NO. OF LAMPS IN
CROSS SECTION
NO. OF
LAMPS IN
FIXTURE
LAMP TYPE
WIDTH
LENGTH
HEIGHT
2
2
3
4
2
2
3
4
28, 32, 54
48HO
28, 32, 54
28, 32, 54
13⅜"
13⅜"
13⅜"
13⅜"
497⁄16"
48"
497⁄16"
497⁄16"
6⅛"*
6⅛"*
6⅛"
6⅛"
2
2
3
3
4
4
2
6
3
4
28, 32, 54
96T8, 96HO, 96T8HO
28, 32, 54
59, 96HO, 96T8HO
96T8
13⅜"
13⅜"
13⅜"
13⅜"
13⅜"
9813⁄16"
96"
9813⁄16"
96"
96"
6⅛"*
6⅛"*
6⅛"
6⅛"
6⅛"
2
2
3
3
4
4
8
4
12
6
8
16
28, 32, 54
96T8, 96HO, 96T8HO
28, 32, 54
96T8, 96HO, 96T8HO
28, 32, 96T8
28, 32, 54
13⅜"
13⅜"
13⅜"
13⅜"
13⅜"
13⅜"
197⅝"
192"
197⅝"
192"
192"
197⅝"
6⅛"*
6⅛"*
6⅛"
6⅛"
6⅛"
6⅛"
43⁄16"
3⅝"
3⅝"
3"
6"
KL
3"
KL
43⁄16"
43⁄16"
2½"
3⅝"
3⅞"
2"
2⅞"
KL
2"
6"
13¼"
KL-VR
*VR reflector option increases fixture depth to 6⅜". N/A in T5 lamping.
69
CSR
Industrial
INDUSTRIALS
Features
•
Die formed steel housing with knockouts
for stems or chain hangers
•
Die embossed reflector with ribs
•
Most models available with 5% uplight
•
Individual or continuous row mounting
•
Channel ends double as joiners
•
All parts are treated with a five stage
phosphate bonding process and finished
with a baked white enamel
•
UL listed 1598, cUL or CSA. Damp
Location standard
Ordering Information
CSR
–
Model
CSR Industrial
No. of Lamps
1 One
2 Two
3 Three (T8 or T5)
housings)
Voltage
U 120V-277V
347 347V
Uplight (Standard) (Solid
Reflector not recommended
with HO units)
SLR Apertured Reflector with 95%
Reflector Specular Silver Finish
Lamp Type
28
32
48
48HO
54
96
96T8
96HO
96T8HO
–
REFLECTOR TYPE
ST Solid Top Reflector (Std.)
U Apertured Reflector for 5%
See Product Availability
table below.
SIZE
4 4'
8 8'
16 16' (Two
–
–
Ballast
4', T5: 28 Watt
4', T8: 32, 30, 28 or 25 Watt
4', T12
4', T12: 60 Watt
4', T5HO: 54 or 51 Watt
8', T12: 75 or 60 Watt
8', T8: 59 Watt
8', T12: 110 or 95 Watt
8', T8: 86 Watt
NOTE: See Technical Section for other ballast options.
E Electronic, Instant Start
3E 3-Lamp Electronic T8 (32W), Instant Start
4E 4-Lamp Electronic T8 (32W), Instant Start
24E (1) 2-Lamp and (1) 4-Lamp Electronic T8 (32W),
Instant Start
EP Electronic, Programmed Start
3EP 3-Lamp Electronic T5HO or T8, Programmed Start
4EP 4-Lamp Electronic T5HO (N/A 347V) or T8,
Programmed Start
Instant Start ballasts available for 32, 96, and 96T8.
Programmed Start ballasts available for all except 96
and 96T8.
Options
BC1 Branch Circuit Wiring
Single Circuit (For more
branch circuit wiring
options see page 113.)
EL Emergency Battery Pack
GLR Fast Blow Fuse
GMF Slow Blow Fuse
PAF Paint After Fabrication
NYC NYC Compliant
NYCU NYC Compliant, Union
Label
For more options see pages
96-112.
Accessories
(Order Separately)
CSRWG Wireguard
CSHC Chain Hanger
(pair)
CSTH Slide Tong
Hanger (pair)
OS1K Occupancy
Sensor Kit,
120/277/347V,
One Relay1
For more accessories see
pages 96-99.
1
Use programmed start ballast. Not recommended for use with instant start. For more occupancy/daylight harvesting sensor accessories see page 98.
4¼"
47⁄16"
⅞" Diameter
3⅝"
⅞" Diameter
3⅝"
70
LAMP TYPE
WIDTH
LENGTH
HEIGHT
4'
1
2
1
2
3
1
2
1
2
3
28, 32
28, 32
48, 48HO, 54
48, 48H0, 54
28, 32, 54
11"
11"
11"
11"
11"
48"
48"
48"
48"
48"
3⅝"
3⅝"
3⅝"
4½"
3⅝"
8'
1
2
1
2
2
3
2
4
2
2
2
6
28, 32, 54
28, 32, 54
96, 96T8
96, 96T8
96HO, 96T8HO
28, 32
11"
11"
11"
11"
11"
11"
96"
96"
96"
96"
96"
96"
3⅝"
3⅝"
3⅝"
3⅝"
4½"
3⅝"
16'
(Two
housings)
2
2
2
8
4
4
28, 32, 54
96, 96T8
96HO, 96T8HO
11"
11"
11"
192"
192"
192"
3⅝"
3⅝"
4½"
4¼"
⅞" Diameter
⅞" Diameter
3⅝"
11"
HO
NO. OF
LAMPS IN
FIXTURE
RS
43⁄16"
4½"
NO. OF LAMPS IN
CROSS SECTION
SIZE
11"
11"
RS, Slimline
Product Availability
11"
T8
K
Heavy Duty Channel
Features
Steel housing with longitudinal ribs for
extra strength
•
Ballast cover retained by ¼ turn
fasteners
•
Individual or row mounting, surface, or
suspended
•
Channel ends double as joiners
•
All metal parts are treated with a five
stage phosphate bonding process and
finished with a baked white enamel
•
UL listed 1598, cUL or CSA. Damp
Location standard
STRIPLIGHTS
•
Ordering Information
K
Model
K Heavy Duty
Channel
–
–
SIZE
4 4'
8 8'
16 16' (Two
No. of Lamps in
cross section
1 One
2 Two
See Product Availability
table below.
housings)
Lamp Type
28
32
48HO
54
96T8
96HO
96T8HO
4', T5: 28 Watt
4', T8: 32, 30, 28 or 25 Watt
4', T12: 60 Watt
4', T5HO: 54 or 51 Watt
8', T8: 59 Watt
8', T12: 110 or 95 Watt
8', T8: 86 Watt
–
Ballast
NOTE: See Technical Section
for other ballast options.
E Electronic T8, Instant
Start
4E 4-Lamp Electronic T8,
Instant Start
EP Electronic T5, T8,
or T12 (96HO only),
Programmed Start
4EP 4-Lamp Electronic
T5HO (N/A 347V) or T8,
Programmed Start
Voltage
U 120V-277V
347 347V
Options
BC1 Branch Circuit Wiring,
Single Circuit (For more
branch circuit wiring
options see page 113)
UN Full Height End Channels
GLR Fast Blow Fuse
EL Emergency Battery Pack
PAF Paint After Fabrication
NYC NYC Compliant
NYCU NYC Compliant, Union
Label
For more options see pages
96-112.
Accessories
(Order separately)
CSWG4
CSR4
CSRA4
S18
4' Wire Guard (w/o reflector)
4' Symmetric Reflector
4' Asymmetric Reflector
18" Stem, 8° Swivel Stem and
Canopy
SS18 18", 45° Swivel Stem and Canopy
KHC 24" Chain Hanger Assembly
KTH Tong Hanger (Pair)
For more accessories see pages 99-101.
Product Availability
NO. of
LAMPS IN
FIXTURE
LAMP TYPE
WIDTH
LENGTH
HEIGHT
4'
1
2
1
2
28, 32, 48HO, 54
28, 32, 48HO, 54
43/16"
43/16"
48"
48"
2½"
2½"
8'
1
2
1
2
28, 54, 96T8, 96HO, 96T8HO
28, 54, 96T8, 96HO, 96T8HO
43/16"
43/16"
96"
96"
2½"
2½"
16'
(Two housings)
1
2
2
4
28, 54, 96T8, 96HO, 96T8HO
28, 54, 96T8, 96HO, 96T8HO
43/16"
43/16"
192"
192"
2½"
2½"
SIZE
43⁄16"
43⁄16"
NO. OF LAMPS IN
CROSS SECTION
2½"
2½"
4¾"
4¾"
2½"
71
CS
Straight-Sided Utility Channel
STRIPLIGHTS
Features
•
Die formed steel housing with heat sink
embossments for cooler running ballasts
•
Ballast cover retained by ¼ turn
fasteners
•
Individual or row mounting, surface or
suspended
•
Channel ends double as joiners
•
All metal parts are treated with a five
stage phosphate bonding process and
finished with baked white enamel
•
UL listed 1598, cUL or CSA. Damp
Location standard
Ordering Information
CS
Model
CS StraightSided
Utility
Channel
–
SIZE
2
3
4
6
8
16
2'
3'
4'
6'
8'
16' (Two
housings)
–
No. of Lamps in
cross section
1 One
2 Two
3 Three
–
Lamp Type
14
17
21
24
25
28
32
See Product
Availability table
below.
39
48
54
96
96T8
2', T5: 14 Watt
2', T8: 17 Watt
3', T5: 21 Watt
2', T5HO: 24 Watt
3', T8: 25 Watt
4', T5: 28 Watt
4', T8: 32, 30, 28
or 25 Watt
3', T5HO: 39 Watt
4", 12
4', T5HO: 54 or
51 Watt
8', T12: 75 or 60
Watt
8', T8: 59 Watt
Ballast
NOTE: See Technical Section
for other ballast options.
E Electronic T8, Instant
Start
3E 3-Lamp Electronic T8,
Instant Start
4E 4-Lamp Electronic T8,
Instant Start
24E (1) 2-Lamp and (1)
4-Lamp Electronic T8,
Instant Start
EP Electronic T5 or T8,
Programmed Start
3EP 3-Lamp Electronic T5 or
T8, Programmed Start
4EP 4-Lamp Electronic
T5HO (N/A 347V) or T8,
Programmed Start
Voltage
U 120V-277V
347 347V
Options
BC1 Branch Circuit Wiring,
Single Circuit (For more
branch circuit wiring
options see page 113)
GLR Fast Blow Fuse
EL Emergency Battery Pack
PAF Paint After Fabrication
Accessories
(Order separately)
CSWG3
CSWG4
CSR4
CSRA4
CSRU4
S18
SS18
CSHC
3' Wire Guard
4' Wire Guard
4' Symmetric Reflector
4' Asymmetric Reflector
4' Symmetric Reflector 5% Uplight
18" Stem, 8° Swivel Stem and Canopy
18", 45° Swivel Stem, and Canopy
Chain Hanger Assembly
For more accessories see pages 99-101.
Product Availability
⅞" Diameter Knockout
113/16"
211/16"
NO. OF LAMPS IN
CROSS SECTION
NO. OF LAMPS
IN FIXTURE
LAMP TYPE
WIDTH
LENGTH
HEIGHT
2'
1
2
3
1
2
3
14, 17, 24
14, 17, 24
17
47/16"
47/16"
47/16"
24"
24"
24"
113/16"
113/16"
113/16"
3'
1
2
3
1
2
3
21, 25, 39
21, 25, 39
25
47/16"
47/16"
47/16"
36"
36"
36"
113/16"
113/16"
113/16"
4'
1
2
3
1
2
3
28, 32, 48, 54
28, 32, 48, 54
28, 32, 54
47/16"
47/16"
47/16"
48"
48"
48"
113/16"
113/16"
113/16"
6'
1
2
3
2
4
6
21, 25, 39
21, 25, 39
21, 25, 39
47/16"
47/16"
47/16"
72"
72"
72"
113/16"
113/16"
113/16"
8'
1
1
2
2
3
2
1
4
2
6
28, 32, 54
96, 96T8
28, 32, 54
96, 96T8
28, 32
47/16"
47/16"
47/16"
47/16"
47/16"
96"
96"
96"
96"
96"
113/16"
113/16"
113/16"
113/16"
113/16"
16'
1
1
2
2
4
2
8
4
28, 32, 54
96, 96T8
28, 32, 54
96, 96T8
47/16"
47/16"
47/16"
47/16"
192"
192"
192"
192"
113/16"
113/16"
113/16"
113/16"
SIZE
47/16"
⅞" Diameter Knockout
113/16"
211/16"
47/16"
72
CH
Heavy Duty Narrow Channel
Features
One or two lamp cross sections
•
Die formed steel channel for extra
strength
•
Snap-on cover, no tools required
•
Rotary lock lampholders
•
Channel ends double as joiners
•
Individual or row mounting, surface or
suspended
•
All metal parts are treated with a five
stage phosphate bonding process and
finished with a baked white enamel
•
UL listed 1598, cUL or CSA. Damp
Location standard
STRIPLIGHTS
•
Ordering Information
CH
Model
CH Heavy
Duty
Narrow
Channel
–
SIZE
1.5
2
3
4
8
16
18"
2'
3'
4'
8'
16' (Two
housings)
–
No. of Lamps in
cross section
1 One
2 Two
See Product
Availability table
below.
–
Lamp Type
Ballast
2', T5: 14 Watt
18', T12: 15 Watt
2', T8: 17 Watt
3', T5: 21 Watt
2', T5HO: 24 Watt
3', T8: 25 Watt
4', T5: 28 Watt
3', T12: 30 Watt
4', T8: 32, 30, 28
or 25 Watt
39 3', T5HO: 39 Watt
40 4' T12: 40 Watt
(with L120
Ballast only)
54 4', T5HO: 54 or
51 Watt
NOTE: See Technical Section
for other ballast options.
E Electronic T8, Instant
Start
4E 4-Lamp Electronic T8,
Instant Start
EP Electronic T5 or T8,
Programmed Start
4EP 4-Lamp Electronic
T5HO (N/A 347V) or
T8, Programmed Start
L Low Power Factor,
Non-energy Saving
(15W and 30W only)
14
15
17
21
24
25
28
30
32
Voltage
U 120V-277V
347 347V
Options
GLR Fast Blow Fuse
EL Emergency Battery Pack
PAF Paint After Fabrication
*Not available in all lamp/
ballast combinations. For more
options see pages 96-112.
Accessories
(Order separately)
CHWG4*
CHR4*
CHRA4*
S18
SS18
4' Wire Guard
4' Symmetric Reflector (1-Lamp only)
4' Asymmetric Reflector (1-Lamp only)
18" Stem, 8° Swivel Stem and Canopy
18", 45° Swivel Stem, and Canopy
*2' and 3' also available; replace 4 in catalog number.
For more accessories see pages 99-101.
Product Availability
SIZE
NO. OF LAMPS IN
CROSS SECTION
NO. OF
LAMPS IN
FIXTURE
LAMP TYPE
WIDTH
LENGTH
HEIGHT
1.5'
1
1
15
33/16"
18"
13/16"
2'
2'
1
2
1
2
14, 17, 24
14, 17, 24
33/16"
33/16"
24"
24"
13/16"
13/16"
3'
3'
1
2
1
2
21, 25, 30, 39
21, 25, 30, 39
33/16"
33/16"
36"
36"
13/16"
13/16"
4'
4'
1
2
1
2
28, 32, 40, 54
28, 32, 40, 54
33/16"
33/16"
48"
48"
13/16"
13/16"
8'
8'
1
2
2
4
28, 32, 54
23, 32, 53
33/16"
33/16"
96"
96"
13/16"
13/16"
16' (Two Housings)
16' (Two Housings)
1
2
4
8
28, 32, 54
28, 32, 54
33/16"
33/16"
192"
192"
13/16"
13/16"
7/16" and ⅞" Diameter
Concentric Knockouts
7/16" and ⅞" Diameter
Concentric Knockouts
33/16"
33/16"
113/16"
End Plate
19/16"
213/16"
113/16"
End Plate
19/16"
37/16"
CH-2LT8
CH-1LT12
73
CN/CNSS
T5 Channel
STRIPLIGHTS
Features
•
Metric length for use with T5 or T5HO
lamps
•
Knockouts in end cap and housing back
for easy power hook up
•
Standard or staggered strip
configurations
•
UL listed 1598, cUL or CSA. Damp
Location standard
•
Ultra narrow 2" width
•
Rotary lock lampholders for positive
lamp contact
Ordering Information
–
Model
CN T5 Strip
CNSS T5 Staggered
SIZE
2 2'
3 3'
4 4'
5 5'
6 6'
8 8'
Strip
–
No. of Lamps in
cross section
1 One
2 Two
See Product
Availability table
below.
–
Lamp Type
14
21
24
28
35
39
54
2', T5: 14 Watt
3', T5: 21 Watt
2', T5H0: 24 Watt
4', T5: 28 Watt
5', T5: 35 Watt
3', T5HO: 39 Watt
4', T5HO: 54 or
51 Watt
80 5', T5HO: 80 Watt
Ballast
NOTE: See Technical Section
for other ballast options.
EP Electronic T5,
Programmed Start
4EP 4-Lamp Electronic
T5HO (N/A 347V),
Programmed Start
Voltage
U 120V-277V
347 347V
Options
GLR Fast Blow Fuse
GMF Slow Blow Fuse
PAF Paint After
Fabrication
EL Emergency
Battery Pack
(N/A in 2' and 3')
For more options see
pages 96-112.
Accessories
(Order separately)
CNR4*
CNRA4*
CNSAR4*
CNSARA4*
CNSSR4*
CNSSAR4*
CNSSARA4*
Symmetric Reflector, 4' CN Strip
Asymmetric Reflector, 4' CN Strip
Specular Symmetric Reflector, 4' CN Strip
Specular Asymmetric Reflector, 4' CN Strip
Symmetric Reflector, 4' CNSS Strip
Specular Symmetric Reflector, 4' CNSS Strip
Specular Asymmetric Reflector, 4' CNSS Strip
*For 3' reflector, replace 4 with 3. For 2' reflector, replace 4 with 2.
Product Availability
NO. OF LAMPS IN
CROSS SECTION
NO. OF
LAMPS IN
FIXTURE
LAMP
TYPE
WIDTH
LENGTH
(CN)
LENGTH
(CNSS)
HEIGHT
2'
1
2
1
2
14, 24
14, 24
2"
2"
22½"
22½"
22½"
26½"
23/16"
23/16"
3'
1
2
1
2
21, 39
21, 39
2"
2"
345/16"
345/16"
345/16"
385/16"
23/16"
23/16"
4'
1
2
1
2
28, 54
28, 54
2"
2"
46⅛"
46⅛"
46⅛"
50⅛"
23/16"
23/16"
5'
1
2
1
2
35, 80
35, 80
2"
2"
5715/16"
5715/16"
5715/16"
6115/16"
23/16"
23/16"
6'
1
2
2
4
21, 39
21, 39
2"
2"
64⅝"
64⅝"
64⅝"
72⅝"
23/16"
23/16"
8'
1
2
2
4
28, 54
28, 54
2"
2"
92⅛"*
92⅛"*
87¾"
96¼"
23/16"
23/16"
SIZE
1¼"
1¼"
23/16"
2"
74
23/16"
2"
*2 ea. 4' fixture.
DE
Side Lamp Channel
Features
Die formed steel channel for extra
strength
•
Snap-on cover, no tools required
•
Rotary lock lampholders
•
Available with one or two lamps
•
Channel ends have knockouts for
through wiring or end feed
•
Individual or row mounting
•
All metal parts are treated with a five
stage phosphate bonding process and
finished with a baked white enamel
•
UL listed 1598, cUL or CSA. Damp
Location standard
STRIPLIGHTS
•
Ordering Information
DE
–
Model
DE Side
Lamp
Channel
SIZE
1.5 18"
2 2'
3 3'
4 4'
–
No. of Lamps in
cross section
1 One
2 Two
See Product
Availability table
below.
Lamp Type
15
17
25
30
32
18", T12: 15 Watt
2', T8: 17 Watt
3', T8: 25 Watt
3', T12: 30 Watt
4', T8: 32, 30, 28
or 25 Watt
–
Ballast
NOTE: See Technical Section
for other ballast options.
E Electronic T8, Instant
Start
EP Electronic T5 or T8,
Programmed Start
L Low Power Factor,
Non-energy Saving
(T12 lamps only)
Voltage
U 120V-277V
347 347V
Options
GLR Fast Blow Fuse
EL Emergency Battery Pack
(3' and 4' only)
PAF Paint After Fabrication
For more options see pages 96-112.
Accessories
(Order separately)
S18 18" Stem, Canopy, and 8° Aligner
SS18 18", 45° Swivel Stem, and Canopy
Product Availability
NO. OF LAMPS IN
CROSS SECTION
NO. OF
LAMPS IN
FIXTURE
Lamp
Type
Width
Length
Height
1.5'
1
2
1
2
15
15
2¾"
2¾"
18"
18"
1⅞"
1⅞"
2'
1
2
1
2
17
17
2¾"
2¾"
24"
24"
1⅞"
1⅞"
3'
1
2
1
2
25, 30
25, 30
2¾"
2¾"
36"
36"
1⅞"
1⅞"
4'
1
2
1
2
32
32
2¾"
2¾"
48"
48"
1⅞"
1⅞"
Size
2¾"
1⅞"
2¾"
1⅞"
⅞" Dia. K.O.
315⁄16"
⅞" Dia. K.O.
5⅛"
For 3-lamp cross section, contact factory.
75
SS
Staggered Strip
STRIPLIGHTS
Features
•
Die formed steel channel
•
•
Flexible field adjustment for easy
installation
Symmetric and asymmetric reflectors
available
•
UL listed 1598, cUL or CSA. Damp
Location standard
•
Offset channel accepts adjoining fixtures
•
Three inch overlap provides uniform
illumination
•
Available with one or two lamps
Ordering Information
SS
–
Model
SS Staggered
NO. of Lamps in
Cross Section
1 One
2 Two
Strip
(Individual
units)
See Product
Availability table
below.
–
Lamp Type
17 2', T8: 17 Watt
25 3', T8: 25 Watt
32 4', T8: 32, 30,
28 or 25 Watt
Reflector Type
Blank No Reflector
SYM Symmetric Reflector
ASYM Asymmetric Reflector
Voltage
U 120V-277V
347 347V
Specify reflector on fixture
and order desired reflector as
accessory.
SIZE
1-Lamp
Length
2 24"
3 36"
4 48"
6 69"
8 93"
–
Note: See Technical Section for other ballast options.
E Electronic T8, Instant Start
3E 3-Lamp Electronic T8, Instant Start
4E 4-Lamp Electronic T8, Instant Start
EP Electronic T5 or T8, Programmed Start
3EP 3-Lamp Electronic T5 or T8, Programmed Start
4EP 4-Lamp Electronic T5HO (N/A 247V) or T8,
Programmed Start
For rows, contact your
local Columbia Lighting
representative.
2-Lamp 2' Only
BC1 Branch Circuit Wiring,
EL
GLR
LR
PAF
NYC
NYCU
Ballast
2-Lamp
Length
2 27"
3 39"
4 51"
6 75"
8 99"
Options
ADJ Adjustable 1-Lamp 4' or
Single Circuit (For more
branch circuit wiring
options see page 113)
Emergency Battery Pack
Fast Blow Fuse
Left/Right Switching
Paint After Fabrication
NYC Compliant
NYC Compliant, Union
Label
Reflector Accessories
(Order separately)
SSR
SSRA
SSRAK
SSRD
SSRDA
Symmetric Reflector (2 pieces)
Asymmetric Reflector (1 piece)
Asymmetric Kicker Reflector (1 piece)
Symmetric Deep Reflector (2 pieces)
Asymmetric Deep Reflector (1 piece)
Adjustable housings use 4' reflectors for field
adjustment. For reflector cross sections see
page 102.
Product Availability
Wireway Cover
(cut to length)
4"
2"
4¾"
SS4-2
SS2-2
NO. OF LAMPS IN
CROSS SECTION
NO. OF
LAMPS IN
FIXTURE
Lamp Type
Width
Length
Height
2'
1
2
1
2
14, 17, 24
14, 17, 24
4¾"
4¾"
24"
27"
2"
2"
3'
1
2
1
2
21, 25, 39
21, 25, 39
4¾"
4¾"
36"
39"
2"
2"
4'
1
2
1
2
28, 32, 54
28, 32, 54
4¾"
4¾"
48"
51"
2"
2"
6'
1
2
2
4
21, 25, 39
21, 25, 39
4¾"
4¾"
69"
75"
2"
2"
8'
1
2
2
4
28, 32, 54
28, 32, 54
4¾"
4¾"
93"
99"
2"
2"
Size
Adjustable Unit
4' adjustable unit is 24" telescoping housing with 48" lamp.
2' adjustable unit is 27" telescoping housing with 24" lamp.
76
EXTREME Environment GUIDE
Introduction
EXTREME ENVIRONMENT
Extreme enclosed and gasketed products fall into three groups based upon their suitability to different applications.
Suitability is based upon listings and ratings by various testing labs and trade organizations. Some options may upgrade a
fixture’s suitability for more demanding environments.
For safety, careful evaluation is required to match the correct product with the intended application. Ambient temperature
extremes, NSF (food service, splash zone rating) and exposure to vandalism are some factors to consider.
Adverse: Used in protected or semi-protected outdoor locations. At a minimum these fixtures have UL1598 wet location
listings. They may have an IP54 rating (protected from sprays in all directions). Upgrades include stainless steel latches,
tough polycarbonate lens and vandal proof hardware.
Severe: Used when the application calls for greater dust and water protection. Typically, these products have a rating of
IP65 (protected against dust and low pressure jets of water), IP66 (protected from strong jets of water) or IP67 (temporary
immersion in 3' of water). Products may be covered by UL1958A for marine application. They are rugged products that can
endure exposure to most severe weather conditions.
Hazardous: Used in hazardous locations calling for a UL844 listing and an IP66 or greater rating. These units have been
evaluated for hazardous, caustic environments and ignition protection. Typically, they have a continuous metallic or high
strength resin housing supplied with hazardous rated ballasts and other high performance components.
Feature
ADVERSE
LUN
FNPV
LU
47A/47S
SEVERE
XFSW
NSF
Option
IP Rating
x
IP54
x
x
IP67
x
NEMA 4X
UL1598A
Marine
UL844
ABS
Hazardous
(Shipbuilding) Location
High
Ambient
x
x
x
x 47A
x
(Inside
Drip Proof)
x
(Inside
Drip Proof)
FNPS
Fiberglass Reinforced
Polyester Resin
x
x
IP65
x
FDPS
Die Cast Aluminum
x
x
IP66
(2 ft.)
x
x
x
IP65
x
x
x
IP65
x
x
x
x
40°C*
x
x
IP66
x
x
(Inside
Drip Proof)
x
x
50°C*
x
x
IP65
x
XTS
FNPH
HAZARDOUS
Material
Fiberglass Reinforced
Polyester Resin
Fiberglass Reinforced
Polyester Resin
Extruded Aluminum
Formed Aluminum
or Steel
Fiberglass Reinforced
Polyester Resin
UL1598
Wet
Location
FDPH
FSPH
HZ
Extruded High
Impact Acrylic
Fiberglass Reinforced
Polyester Resin
Die Cast Aluminum
Die Formed
Stainless Steel
Formed Steel
x
40°C*
x
50°C*
x
x
x
* Maximum ambient temperature approved for product family (can change based on lamp type, markings and options).
77
LUN
Enclosed and Gasketed Fiberglass Industrial
EXTREME ENVIRONMENT
Features
•
Non-metallic fiberglass housing with
waterproof ½"threaded hubs
•
Fully gasketed
•
Wet location standard
•
Molded ABS thermoplastic latches
•
One piece, impact resistant acrylic
diffuser with smooth surface
•
All metal parts are treated with a five
stage phosphate bonding process and
finished with a baked white enamel
•
UL listed 1598, cUL or CSA, Wet Location
Standard
Ordering Information
LUN
Model
LUN Enclosed
and
Gasketed
Fiberglass
Industrial
–
SIZE
2 2'
4 4'
8 8'
–
No. of Lamps in
Cross Section
1 One
2 Two
3 Three
See Product
Availability table
below.
Lamp Type
17 2', T8: 17 Watt
28 4', T5: 28 Watt
32 4', T8: 32, 30, 28
–
Ballast
or 25 Watt
4', T12HO: 60 Watt1
4', T8HO: 44 Watt
4', T5HO: 54 Watt
8', T12: 75 or 60
Watt
96T8 8', T8: 59 Watt
96HO 8', T12HO: 110 or
95 Watt1
96T8HO 8', T8HO: 86 Watt
1
High Output units should
not be surface mounted or
mounted in areas with warm
ambient temperatures.
48HO
48T8HO
54
96
NOTE: See Technical Section
for other ballast options.
E Electronic T8,
Instant Start
3E 3-Lamp Electronic
T8, Instant Start
4E 4-Lamp Electronic
T8, Instant Start
24E (1) 2-Lamp and (1)
4-Lamp Electronic
T8, Instant Start
EP Electronic,
Programmed Start
3EP 3-Lamp Electronic,
Programmed Start
4EP 4-Lamp Electronic,
Programmed Start
24EP (1) 2-Lamp and (1)
4-Lamp Electronic,
Programmed Start
Options
DR 50% DR Acrylic Lens
GLR Fast Blow Fuse
PP Clear Prismatic
Voltage
U 120V-277V
347 347V
Polycarbonate Lens
SSL Stainless Steel
Latches
SSLTP Stainless Steel
Tamper Resistant
Latches
TP Tamper Resistant
Latches
NYC NYC Compliant
NYCU NYC Compliant,
Union Label
Note: Contact your
local Columbia Lighting
representative for a list of
available battery packs.
Accessories (Order separately)
HUBK Stem Hanging Kit
LUNHK Hanging Kit
PEBU End Bracket Universal Surface
Mount Kit
PEBA Adjustable Surface Mount
Bracket Kit
Product Availability
79/16"
NO. OF LAMPS IN
CROSS SECTION
NO. OF
LAMPS IN
FIXTURE
LAMP TYPE
WIDTH
LENGTH
HEIGHT
2'
1
2
1
2
17
17
79/16"
79/16"
2513/16"
2513/16"
61/8"
61/8"
4'
1
2
3*
1
2
3
28, 32, 54
28, 32, 48HO, 48T8HO, 54
32
79/16"
79/16"
79/16"
4913/16"
4913/16"
4913/16"
59/16"
59/16"
59/16"
8'
1
1
2
2
3*
2
1
4
2
6
28, 32, 54
96, 96T8, 96HO, 96T8HO
28, 32, 54
96, 96T8, 96HO, 96T8HO
32
79/16"
79/16"
79/16"
79/16"
79/16"
9713/16"
9713/16"
9713/16"
9713/16"
9713/16"
59/16"
59/16"
59/16"
59/16"
59/16"
SIZE
3"
59/16"
Wet location in traditional (lens down)
mounting position only.
*3-Lamp ballast required.
78
FNPV
Performer Series, Severe Environment
Features
•
NSF listed
•
Accessible drop-down ballast tray
•
Nylon or stainless steel latches available
with tamper resistant screws
•
•
For use in wet locations where moisture
and washdown are prevalent
Listed as electrical enclosure for thrubranch wiring
•
•
25°C ambient listed
Conduit hubs available in die-cast
aluminum or 316 stainless steel
•
•
For use in outdoor, hosedown, corrosive
location, and high ambient conditions
Mounting accessories in stainless or
galvanized steel
•
UL 1598 wet location listed
EXTREME ENVIRONMENT
Wet location certified for ceiling and
wall mount
•
Ordering Information
FNPV
–
Model
FNPV Performer
2
Lens
No. of Lamps in
Cross Section
2 Two
Series,
Severe
Environment
2H
–
Blank
DR
CA
OA
PP
Acrylic Crepe, 25% DR
Acrylic Crepe, 100% DR
Clear Acrylic, 25% DR
Opal Acrylic, 25%DR
Clear Prismatic Polycarbonate1
Voltage
U 120V-277V
347 347V
(HO only)
–
Entries
2H (2) ½"
Aluminum
Hubs
Options
GLR Fast Blow Fuse
MLID Marine Listed, Indoor
Drip Proof
NFS National Sanitation
Foundation Listed
SSL Stainless Steel
Latches
SSLTP Stainless Steel
SIZE
2 2'
4 4'
8 8'
Lamp Type
14
17
24
28
32
48T8HO
96T8
96T8HO
Ballast2
2', T5: 14 Watt
2', T8: 17 Watt
2', T5HO: 24 Watt
4', T5: 28 Watt
4', T8: 32, 30, 28 or 25 Watt
4', T8HO: 44 Watt
8', T8: 59 Watt
8', T8HO: 86 Watt
NOTE: See Technical Section for other
ballast options.
E (1 or 2) 2-Lamp Electronic
T8, Instant Start
4E 4-Lamp Electronic T8,
Instant Start
EP (1 or 2) 2-Lamp Electronic T5
or T8, Programmed Start
4EP 4-Lamp Electronic,
Programmed Start
Tamper Resistant
Latches
TP Tamper Resistant
Latches
NYC NYC Compliant
NYCU NYC Compliant,
Union Label
Accessories3
(Order separately)
PTBS Top Bracket Surface Mount, 2 Per Kit,
304 Stainless
PTBS3 Top Bracket Surface Mount, 3 Per Kit,
304 Stainless (8' units only)
PTBA Top Bracket Wall/Angle Kit, 2 Per Kit,
304 Stainless
PTBA3 Top Bracket Wall/Angle Kit, 3 Per Kit,
304 Stainless (8' units only)
PEBUHSMS End Bracket Universal Surface Mount
1
Wet location ceiling mount only (no IP65).
Ballasts may not be available in all combinations of lamp/voltage/starting temp/THD shown above.
3
Fusing not available.
Kit for 2H Hub option
2
79/16"
Product Availability
SIZE
NO. OF LAMPS IN
CROSS SECTION
TPSD Tamper Resistant Screwdriver
NO. OF
LAMPS IN
FIXTURE
LAMP TYPE
WIDTH
LENGTH
HEIGHT
2'
2
2
14, 17, 24
6⅝"
2515/16"
5"
4'
2
2
28, 32, 48T8HO
79/16"
4913/16"
55/16"
8'
2
2
2
4
96T8, 96T8HO
28, 32, 48T8HO
79/16"
79/16"
9713/16"
9713/16"
5⅜"
5⅜"
55/16"
79
LU
Enclosed and Gasketed Aluminum Industrial
EXTREME ENVIRONMENT
Features
•
Aluminum housing for superior heat
dissipation
•
Fully gasketed
•
Injection molded PVC ends
•
Polypropylene latches
•
One piece, impact resistant acrylic
diffuser with smooth surface
•
All parts are treated with a five-stage
phosphate bonding process and finished
with a baked white enamel
•
UL listed 1598, cUL or CSA. Damp
Location Standard. Wet Location option
Ordering Information
LU
–
–
Model
LU Enclosed and
Gasketed
Aluminum
Industrial
SIZE
4 4'
8 8'
No. of Lamps in
Cross Section
1 One
2 Two
See Product
Availability table
below.
Lamp Type
32 4', T8: 32, 30,
28 or 25 Watt
48HO 4', T12: 60
Watt1
48T8HO 4', T8: 44 Watts1
96 8', T12: 75 or
60 Watt
96T8 8', T8: 59 Watt
96HO 8', T12: 110 or
95 Watt1
96T8HO 8', T8: 86 Watt1
1
High Output units should
not be surface mounted.
–
Ballast
NOTE: See Technical Section
for other ballast options.
E Electronic T8, Instant
Start
EP Electronic T8 and T12,
Programmed Start
LE Energy Saving
Magnetic T12
(1-Lamp 48HO only,
specify voltage)
Voltage
U 120V277V
347 347V
Options
DR 100% DR Acrylic Lens
EL Emergency Battery Pack
(N/A with Wet Location)
Fast Blow Fuse
Wet Location*
NYC Compliant
NYC Compliant, Union Label
*Wet location in traditional (lens
down) mounting position only.
GLR
WL
NYC
NYCU
Accessories (Order separately)
HUBK Stem Hanging Kit
SSHK Stainless Steel Hanging Kit
(Chain not included)
PEBU End Bracket Universal Surface
Mount Kit
Product Availability
¼"
NO. OF LAMPS IN
CROSS SECTION
NO. OF
LAMPS IN
FIXTURE
LAMP TYPE
WIDTH
LENGTH
HEIGHT
4'
1
2
1
2
32, 48HO, 48T8HO
32, 48HO, 48T8HO
8"
8"
50¼"
50¼"
5¾"
5¾"
8'
1
1
2
2
2
1
4
2
32, 48HO, 48T8HO
96, 96T8, 96HO, 96T8HO
32, 48HO, 48T8HO
96, 96T8, 96HO, 96T8HO
8"
8"
8"
8"
98¼"
98¼"
98¼"
98¼"
5¾"
5¾"
5¾"
5¾"
SIZE
80
7½"
2½"
3½"
5¾"
27/16"
8"
47
Steel or Aluminum All Weather Industrial
Features
Choice of 20 gauge steel or .040" thick
aluminum housing
•
Shielding secured with steel latches and
full length hinge
•
Steel is damp location, aluminum is
damp or wet location
•
All metal parts have a high reflectance
outdoor baked white enamel finish
•
Lens is enclosed in extruded aluminum
frame
•
Ceiling mount only
•
•
One piece extruded prismatic high
impact lens, smooth exterior
UL listed 1598, cUL or CSA Damp
Location standard, Wet Location option
for 47A
•
Thick PVC gasket is recessed into fixture
body
EXTREME ENVIRONMENT
•
Ordering Information
–
Model
47A Aluminum
Housing
47S Steel
Housing
–
No. of Lamps in
Cross Section
1 One
2 Two
–
Ballast
NOTE: See Technical Section
for other ballast options.
E Electronic T8, Instant
Start
See Product
4E 4-Lamp Electronic T8,
Availability table
Instant Start
below.
EP Electronic,
Programmed Start
SIZE
Lamp Type
4EP 4-Lamp Electronic,
4 4'
32 4', T8: 32 Watt
Programmed Start
8 8'
48HO 4', T12HO: 60
Energy Saving
LE
Watt1
Magnetic T12 (96HO
only)
48T8HO 4', T8HO: 44 Watt
96 8', T12: 75 or 60
Watt
96T8 8', T8: 59 Watt1
96HO 8', T12HO: 110 or
95 Watt1
96T8HO 8', T8HO: 86 Watt1
1
High Output units should
not be surface mounted.
Voltage
U 120V-277V
347 347V
Product Availability
Lens
DR12 Pat #12
High Impact
(Standard)
CPP Clear Prismatic
Polycarbonate
OP Frost Glaze
Acrylic Lens
UV UV Blocking
Acrylic Lens
Options
EL Factory Installed Damp
Label Battery Pack
(N/A wet label units)
GLR Fast Blow Fuse
TP Tamper Resistant Latches
WL Wet Location*
(47A only)
NYC NYC Compliant
NYCU NYC Compliant, Union
Label
* Wet location in traditional
(lens down) mounting position
only.
7"
NO. OF LAMPS IN
CROSS SECTION
NO. OF
LAMPS IN
FIXTURE
LAMP TYPE
WIDTH
LENGTH
HEIGHT
4'
1
2
1
2
32, 48HO, 48T8HO
32, 48HO, 48T8HO
7"
7"
51"
51"
5⅛"
5⅛"
8'
1
1
2
2
2
1
4
2
32, 48HO, 48T8HO
96T8, 96HO, 96T8HO
32, 48HO, 48T8HO
96T8, 96HO, 96T8HO
7"
7"
7"
7"
99"
99"
99"
99"
5⅛"
5⅛"
5⅛"
5⅛"
SIZE
–
⅞" Diameter
Knockout
5⅛"
81
XFSW
Severe Fiberglass Low/High Bay
EXTREME ENVIRONMENT
Features
•
IP67 Rated for hose down, wet locations
•
•
NSF Rated for Splash Zone, suitable for
food production areas
Stainless steel latches and V-hangers
standard
•
4-Lamp T5HO cross section UL approved
at 40°C
•
Specular aluminum (Narrow Beam)
or painted gloss white (Wide Beam)
reflectors
•
Exterior quick mounting system reduces
installation time
•
5VA (f1) fire rated materials
•
Fiberglass housing and tough injection
molded lens
•
Pour in place gasket and cam latches
seal enclosure
Ordering Information
XFSW
4
Model
XFSW Severe
Fiberglass
Low/High
Bay
SIZE
4 4'
–
U
–
No. of Lamps in
Cross Section
4 Four
6 Six
Lens Type
CA Clear Impact
Options
F5841 41K 85CRI 54W T5HO Lamps
Voltage
U 120V-277V
Resistant Acrylic
Installed
CP Clear UV
See Product
Availability table below.
Lamp Type
32 4', T8: 32, 30, 28,
or 25 Watt
54 4', T5HO: 54 or
51 Watt
F0841 41K 82CRI 32W T8 Lamps
Stabilized
Polycarbonate
Reflector
M4R 95% Reflective
Specular
Aluminum
(Narrow Beam)
GW Gloss White
(Wide Beam)
Installed
F3C8W 3 Conductor liquid tight
Ballast*
NOTE: See Technical Section for other ballast
options.
F3C15W
XFSW4-454
4EP (1) 4-Lamp Electronic T5HO,
F3C8WQ
Programmed Start
XFSW4-654
24EP (1) 2-Lamp and (1) 4-Lamp Electronic
T5HO, Programmed Start
XFSW4-432
4EHL (1) 4-Lamp Electronic T8, High Light
F3C15WQ
Output, Instant Start
EPHL (2) 2-Lamp Electronic T8, High Light
Output, Programmed Start
4EPHL (1) 4-Lamp Electronic T8, High Light
Output, Programmed Start
Accessories
(Order Separately)
LHVQM5 Aircraft Cable, 5' (Pair)
LHVQM10 Aircraft Cable, 10' (Pair)
XFSWSB Surface Mount Bracket,
XFSW4-632
3EHL (2) 3-Lamp Electronic T8, High Light
Output, Instant Start
3EPHL (2) 3-Lamp Electronic T8 High Output,
Programmed Start
*For NEMA premium ballast, add prefix N. e.g.,
NEPHL.
kit includes 2 brackets
Four Installation Points
4'
7½"
50"
⅞" Entry
11/16"
6"
82
14½"
GLR
GMF
Product Availability
SIZE
7½"
OSWL
feed cord wired to fixture
(no plug) 8'
3 Conductor liquid tight feed
cord wired to fixture (no
plug) 15'
8' Cord with liquid tight
quick disconnect 6.5' from
fixture end, 1.5' of cord with
no plug at feed end
15' Cord with liquid tight
quick disconnect 13.5' from
fixture end, 1.5' of cord with
no plug at feed end
Occupancy Sensor Wet
Location Factory Installed
(IP65 rated with adjustable
bracket. Requires
programmed start ballasts)
Fast Blow Fuse
Slow Blow Fuse
NO. OF LAMPS IN
CROSS SECTION
LAMP TYPE
WIDTH
LENGTH
HEIGHT
4
6
32, 54
32, 54
14½"
14½"
50"
50"
6"
6"
FNPS
Performer Series, Severe Environment
Features
Wet location certified for ceiling and wall
mount
•
UL 1598A marine listed (optional) standard
wet location
•
Nylon or stainless steel latches available with
tamper resistant screws
•
Accessible drop down ballast tray
•
Listed as electrical enclosure for thru-branch
wiring
•
Conduit hubs available in die-cast aluminum
or 316 stainless steel
•
Mounting accessories in stainless or
galvanized steel
•
For use in wet locations where moisture and
washdown are prevalent
•
25°C ambient listed
•
For use in outdoor, hosedown, and corrosive
location, and high ambient conditions
•
IP65 listed for dust-tight, hosedown, and
outdoor
EXTREME ENVIRONMENT
•
Ordering Information
FNPS
–
Model
FNPS Performer
–
No. of Lamps in
Cross Section
2 Two
3 Three (4' only)
4 Four (4' only)
Series,
Severe
Environment
See Product Availability
table below.
SIZE
4 4'
8 8'
–
Lens
Blank
DR
CA
OA
PP
Acrylic Crepe, 25% DR
Acrylic Crepe, 100% DR
Clear Acrylic, 25% DR
Opal Acrylic, 25% DR
Clear Prismatic Polycarbonate1
Lamp Type
28
32
48T8HO
96T8
96HO
96T8HO
Voltage
U 120V-277V
347 347V (HO only)
Ballast2
4', T5: 28 Watt
4', T8: 32, 30, 28 or 25 Watt
4', T8HO: 44 Watt
8', T8: 59 Watt
8', T12HO: 110 or 95 Watt
8', T8HO: 86 Watt
Entries
2H (2) ½"
Aluminum
Hubs
2HS (2) 1/2"
Stainless
Steel Hubs
2H3S (2) 3/4"
Stainless
Steel Hubs
2HMS (2) 20mm
Stainless
Steel
Hubs3
Options
GLR Fast Blow Fuse
MLID Marine Listed,
Indoor Drip Proof
NFS National Sanitation
Foundation Listed
SSL Stainless Steel
Latches
SSLTP Stainless Steel
Tamper Resistant
Latches
TP Tamper Resistant
Latches
Accessories3
(Order separately)
NOTE: See Technical Section for other
ballast options.
E (1 or 2) 2-Lamp Electronic T8,
Instant Start
EHL Electronic T8, High Light Output,
Instant Start
EP Electronic T5, T8, or T12
(96HO only), Programmed Start
LE Energy Saving Magnetic T12
(96HO only)
PTBS Top Bracket Surface Mount, 2 Per Kit,
304 Stainless
PTBS3 Top Bracket Surface Mount, 3 Per Kit,
304 Stainless (8' units only)
PTBA Top Bracket Wall/Angle Kit, 2 Per Kit,
304 Stainless
PTBA3 Top Bracket Wall/Angle Kit, 3 Per Kit,
304 Stainless (8' units only)
PEBU End Bracket Universal Surface Mount
Kit for 2H3S Hub Option
PEBUHSMS End Bracket Universal Surface Mount
Kit for 2H and 2HS Hub Option
1
Wet location ceiling mount only (lens down).
2
Ballasts may not be available in all combinations of lamp/voltage/starting temp/THD shown above.
3
20mm entries not CSA or ABS certified.
4
Fusing not available.
79/16"
Product Availability
NO. OF LAMPS IN
CROSS SECTION
NO. OF
LAMPS IN
FIXTURE
LAMP TYPE
WIDTH
LENGTH
HEIGHT
4'
2
3
4
2
3
4
28, 32, 48T8HO
28, 32
28
79/16"
79/16"
79/16"
4913/16"
4913/16"
4913/16"
55/16"
55/16"
55/16"
8'
2
2
59, 96HO, 96T8HO
79/16"
9713/16"
5⅜"
SIZE
TPSD Tamper Resistant Screwdriver
55/16"
FNPS
83
FDPS
Die Cast Performer Series, Severe Environment
EXTREME ENVIRONMENT
Features
•
For use in wet, outdoor, hosedown, marine, and
corrosive locations on high ambient conditions
•
Lens-impact resistant polycarbonate. Prismatic
or clear
•
Up to 50°C ambient listed
•
•
Accessible drop down ballast tray
Lens retainers - 316SS allen socket head
(3/16" or 5mm driver)
•
T5 14W/28W lamp availability. Up to three lamps
per 2'/4' unit
•
Finish - electrostatically applied baked powder
polyester paint
•
Lens choices of polycarbonate in prismatic or
clear design
•
UL 1598A Marine Outdoor (“ML” option)
•
IP66 and NEMA 4x Rated
•
Copper-free (<0.4% copper) die-cast aluminum
housing
•
Gasket (silicone)
Ordering Information
FDPS
–
–
Model
FDPS Die Cast
No. of Lamps in
Cross Section
2 Two
3 Three
Performer
Series,
Severe
Environment
–
Lens
CP Clear Polycarbonate
Smooth
PP Clear Prismatic
Lamp Type
14 2', T5: 14 Watt
17 2', T8: 17 Watt
24
28
32
48T8HO
GLR
ML
NC
VPS
Polycarbonate
See Product
Availability table
below.
SIZE
2 2'
4 4'
Options
Voltage
U 120V-277V
347 347V
(2-Lamp only)
2', T5HO: 24 Watt
(2-Lamp only)
4', T5: 28 Watt
4', T8: 32, 30, 28
or 25 Watt
4', T8HO: 44 Watt
Ballast1
Fast Blow Fuse
UL 1598 Marine Outdoor
National Sanitation Foundation
Vibration Resistant Sockets
(Standard w/ML option)
Accessories3
(Order separately)
NOTE: See Technical Section for
other ballast options.
E Electronic T8, Instant Start
(-2O°F for HO lamps)
EHL Electronic T8, 1.2 Ballast
Factor, High Light Output,
Instant Start <10% THD
EP Electronic T5 or T8,
Programmed Start
PTBS Top Bracket Surface Mount, 2 Per Kit,
304 Stainless
PTBA Top Bracket Wall/Angle Kit, 2 Per Kit,
304 Stainless
1
Ballasts may not be available in all combinations of lamp/voltage/starting temp/THD shown above.
Fusing not available.
3
Mounting hardware not included with accessories.
4
Recommend use of PTBS & PTBA accessories with stainless steel hubs.
2
5⅜"
Product Availability
NO. OF LAMPS IN
CROSS SECTION
NO. OF
LAMPS IN
FIXTURE
LAMP TYPE
WIDTH
LENGTH
HEIGHT
2'
2
3
2
3
14, 17, 24
14
5⅜"
5⅜"
27⅜"
27⅜"
49/16"
49/16"
4'
2
3
2
3
28, 32, 48T8HO
28
5⅜"
5⅜"
50½"
50½"
49/16"
49/16"
SIZE
49/16"
84
XTS
Enclosed and Gasketed Acrylic Tube, Severe Environment
Features
Suitable for wet locations
•
NSF Certified, Splash Zone Food Processing
•
NEMA 4X hose down
•
0.125" thick extruded clear acrylic
enclosure
•
Endcaps – 18 GA., spun 304 stainless steel
with silicone gasket
•
•
72" of 16/3 SJ0 cord installed with
straight male cord connector (rated IP67)
in End Cap; other end of cord less plug, is
supplied as standard
•
Two stainless steel straps (allows
suspension anywhere along enclosure)
supplied standard
•
Optional wall mounting bracket kit
available
95% reflective specular aluminum
or painted gloss white reflector with
(minimum reflectance 88%)
EXTREME ENVIRONMENT
•
Ordering Information
XTS
–
Model
XTS Enclosed and
2
–
No. of Lamps in
Cross Section
2 Two
Gasketed Acrylic
Tube, Severe
Environment
Reflector
M4R 95% Reflective
Specular
Aluminum
(Narrow Beam)
GW Gloss White
(Wide Beam)
See Product
Availability table
below.
SIZE
4 4'
8 8'
Lamp Type
32 4', T8: 32, 30, 28,
or 25 Watt
54 4', T5HO: 54 or
51 Watt
SIZE
Voltage
U 120V-277V
–
–
Lamps INstalled
FO841 41K 82CRI 32W T8
Lamps Installed
F5841 41K 85CRI 54W T5HO
Lamps Installed
Ballast*
NOTE: See Technical Section for other ballast options.
E (1) 2-Lamp Electronic T8, Instant Start
4E (1) 4-Lamp Electronic T8, Instant Start
EHL (1) 2-Lamp Electronic T8,
High Light Output, Instant Start
4EHL (1) 4-Lamp Electronic T8,
High Light Output, Instant Start
EP (1) 2-Lamp Electronic T5, Programmed Start
4EP (1) 4-Lamp Electronic T5HO, Programmed Start
EPHL (1) 2-Lamp Electronic T8,
High Light Output, Programmed Start
4EPHL (1) 4-Lamp Electronic T8,
High Light Output, Programmed Start
*For NEMA premium ballast, add prefix N. e.g., NEPHL.
Options
F3C6WT 6' Mini-Quick
disconnect cord
set. Threaded male
receptacle, strain
relief installed in end
cap. Straight threaded
female plug one end
of cord, other end has
stripped leads ready
for feed installation
F3C12WT 12' Mini-Quick
disconnect cord
set. Threaded male
receptacle, strain
relief installed in end
cap. Straight threaded
female plug one end
of cord, other end has
stripped leads ready
for feed installation
GLR Fast Blow Fuse
GMF Slow Blow Fuse
50" / 97"
Product Availability
NO. OF LAMPS IN
CROSS SECTION
U
–
NO. OF
LAMPS
LAMP
TYPE
DIAMETER
LENGTH
4'
2
2
32, 54
6¼"
50"
8'
2
4
32, 54
6¼"
97"
6¼"
Hanger
Bracket
7¼"
85
FNPH
Performer Series, Hazardous Location
EXTREME ENVIRONMENT
Features
• For use in wet, outdoor, hazardous, hosedown,
and corrosive locations where high ambient
environments can cause abusive lighting conditions
• UL 844: Class I, Div. 2 Groups A, B, C, D; Class I,
Zone 2 Groups IIC, IIB, IIA
• IP65 listed for dust-tight, hosedown, and outdoor
applications
• Accessible drop down ballast tray
• Patented end bracket system for UL 844 stress
requirements
• Fiberglass reinforce polyester housing listed as an
electrical enclosure for thru-branch wiring
• Lens choices of acrylic/polycarbonate in crepe,
prismatic, opal, and clear design. High DR content
also available.
• Conduit hubs available in die-cast aluminum or 316
stainless steel
• Up to 40°C ambient listed
• Wet location certified for ceiling and wall mount
• Nylon and stainless steel latches available with
tamper proof capability
• T5 28W lamp capability. Up to four lamps per 4' unit
Ordering Information
FNPH
4
–
Model
FNPH Performer
–
Lens
No. of Lamps in
Cross Section
2 Two
3 Three
4 Four
Series,
Hazardous
Location
Blank
DR
CA
OA
PP
See Product
Availability table
below.
SIZE
–
Lamp Type
4 4'
Voltage
U 120V-277V
347 347V
Acrylic Crepe, 25% DR
Acrylic Crepe, 100% DR
Clear Acrylic, 25% DR
Opal Acrylic, 25%DR
Clear Prismatic
Polycarbonate
Ballast1
28 4', T5: 28 Watt
32 4', T8: 32, 30, 28 or
NOTE: See Technical Section for other
ballast options.
E Electronic T8, Instant Start
(-20°F for HO lamps)
EP Electronic T5 or T8,
Programmed Start
25 Watt
Entries
2H (2) ½"
Aluminum
Hubs
2HS (2) 1/2"
Stainless
Steel Hubs
2H3S (2) 3/4"
Stainless
Steel Hubs
2HMS (2) 20mm
Stainless
Steel Hubs3
Options
BHD65U Hazardous and
Damp Rated
Emergency Battery
Pack
GLR Fast Blow Fuse3
SSLTP Stainless Steel
Tamper Resistant
Latches
TP Tamper Resistant
Latches
Accessories2
(Order separately)
PTBS Top Bracket Surface Mount, 2 Per Kit,
304 Stainless4
PTBA Top Bracket Wall/Angle Kit, 2 Per Kit,
304 Stainless4
TPSD Tamper Resistant Screwdriver
1
Ballasts may not be available in all combinations of lamp/voltage/starting temp/THD shown above.
20mm entries not CSA or ABS certified.
3
Fusing not available with CSA certification.
4
Recommend use of PTBS & PTBA accessories with stainless steel hubs.
2
Product Availability
SIZE
4'
86
79/16"
NO. OF LAMPS IN
CROSS SECTION
NO. OF
LAMPS IN
FIXTURE
LAMP TYPE
AMBIENT
CLASS 1
DIV 2
CLASS 1
ZONE 2
LENGTH
2
2
3
3
4
2
2
3
3
4
32
28
28
32
28
40°C
40°C
40°C
35°C
40°C
T5
T5
T4A
T5
T4A
T5
T5
T4
T5
T4
4913/16"
4913/16"
4913/16"
4913/16"
4913/16"
55/16"
FDPH
Die Cast Performer Series, Hazardous Location
Features
corrosive locations for high ambient conditions
EXTREME ENVIRONMENT
• For use in wet, outdoor, hazardous, hosedown, and
• Gasket - silicone
• Finish - electrostatically applied baked powder
• Accessible drop down ballast tray
polyester paint
• T5 14W/28W lamp availability. Up to three lamps
• UL 844: Class I, Div. 2 Groups A, B, C, D; Class I,
per 2'/4' unit
Zone 2 Groups IIC, IIB, IIA; Class II, Div. 2 Groups F,
G (2' only - T Code=T6); Class III (2' only)
• Ballast backup capability
• UL1598A Marine Outdoor (“ML” option)
• Copper-free (0.4% copper) die-cast aluminum
• UL Listed 1598 Wet Location
housing
• Lens-impact resistant polycarbonate. Prismatic or
clear
• IP66 and NEMA 4x Rated
• Lens retainers - 316SS allen socket head (3/16" or
5mm driver)
Ordering Information
FDPH
–
–
Model
FDPH Die Cast
No. of Lamps in
Cross Section
2 Two
3 Three (4' only)
Performer
Series,
Hazardous
Location
–
Lens
CP Clear Polycarbonate
Smooth
PP Clear Prismatic
Polycarbonate
See Product
Availability table
below.
SIZE
2 2'
4 4'
Options
GLR Fast Blow Fuse
ML UL 1598 Marine Outdoor
NC National Sanitation
Foundation
VPS Vibration Resistant Sockets
(Standard w/ML option)
Lamp Type
14
17
28
32
Voltage
U 120V-277V
347 347V
Ballast2
2', T5: 14 Watt
2', T8: 17 Watt (2-Lamp only)
4', T5: 28 Watt
4', T8: 32, 30, 28 or 25 Watt
NOTE: See Technical Section for
other ballast options.
E Electronic T8, Instant Start
<10% THD, O°F
EP Electronic T5 or T8,
Programmed Start
<10% THD, O°F
Accessories
(Order separately)
PTBS Top Bracket Surface Mount,
2 Per Kit, 304 Stainless
PTBA Top Bracket Wall/Angle Kit,
2 Per Kit, 304 Stainless
1
Fusing not available.
Ballasts may not be available in all combinations of lamp/voltage/starting temp/THD shown above.
Contact your local Columbia Lighting Representative for more details.
2
Product Availability
5⅜"
NO. OF LAMPS IN
CROSS SECTION
NO. OF
LAMPS IN
FIXTURE
LAMP TYPE
CLASS 1
DIV 2
CLASS 1
ZONE 2
CLASS 2
ZONE 2
LENGTH
2'
2
3
2
3
14, 17
14
T6
T4A
T6
T4
T6
T6
27⅜"
27⅜"
4'
2
3
2
3
28, 32
28
T5
T5
T5
T5
-
50½"
50½"
SIZE
49/16"
FDPH
87
FSPH
Stainless Steel Performer Series, Hazardous Location
EXTREME ENVIRONMENT
Features
•
For use outdoor, hosedown, hazardous,
and corrosive environments
•
Ceiling, pendant, or wall mount
•
Latches - captive, toggle action 304 SS
•
Lens - tempered glass, high-impact
acrylic or polycarbonate
•
Gasket - one piece extruded silicone
•
Bracket accessories - 304 SS
•
UL844: Class I, Div. 2 Groups A, B, C, D
(T-Code = T3C); Class II, Div. 2 Group G;
Class III
•
UL listed 1598 Wet Location
Ordering Information
FSPH
4
Model
FSPH Stainless
SIZE
4 4'
Steel
Performer
Series,
Hazardous
Location
32
–
–
–
Lens
Blank Tempered Glass
DR Acrylic High Impact,
No. of Lamps in
Cross Section
1 One
2 Two
3 Three
Voltage
U 120V-277V
347 347V
100% DR
CP Clear Polycarbonate
Options
BHD65U Hazardous and Damp
Rated Emergency
Battery Pack
NC National Sanitation
Foundation Certified
See Product Availability
table below.
Lamp Type
Ballast 1
32 4', T8: 32, 30, 28 or 25 Watt
NOTE: See Technical Section for
other ballast options.
E Electronic Instant Start (Std.)
3E 3-Lamp Electronic T8,
Instant Start <10% THD
EP Electronic Programmed Start
(Required for 48T8HO)
Accessories
(Order separately)
FSPHWA Top Bracket Wall/Angle Kit,
2 Per Kit, 304 Stainless Steel
FSPHB Top Bracket Suspension Kit,
2 Per Kit, 304 Stainless Steel
1
Ballasts may not be available in all combinations of lamp/voltage/starting temp/THD shown above.
Contact your local Columbia Lighting Representative for more details.
Product Availability
SIZE
4⅝"
4'
8"
88
NO. OF LAMPS IN
CROSS SECTION
NO. OF
LAMPS IN
FIXTURE
LAMP TYPE
WIDTH
LENGTH
HEIGHT
1
2
3
1
2
3
32
32
32
8"
8"
8"
51⅜"
51⅜"
51⅜"
4⅝"
4⅝"
4⅝"
HZ
Hazardous Location Troffer
Features
Temperature rating of T3C (160°C) in
25°C ambient
•
Single conduit hub is supplied as
standard, second hub optional
•
20 gauge housing
•
Polyester powder coat finish
•
Door frame is attached to housing with a
heavy gauge continuous hinge
•
UL 844 listed for hazardous locations
•
Class I, Division 2: Groups A, B, C, D
•
UL listed 1598, cUL or CSA.
Wet Location Standard
•
Three positive sealing screws secure
door opposite hinge
•
Four lens selections available
EXTREME ENVIRONMENT
•
Ordering Information
HZ
–
Model
HZ Hazardous
No. of Lamps in
Cross Section
2 Two
3 Three
4 Four
Location
Troffer
FS
–
See Product
Availability table
below.
SIZE
14 1' × 4' (2- and 3-Lamp only)
22 2' × 2' (2-Lamp only)
24 2' × 4'
Lamp Type
32 4', T8: 32, 30,
28 or 25 Watt
32U6 U-Bent, 6"
Doors
FS Flush Steel
Fully Hinged
Door Frame
Leg Spacing
T8: 32 Watt
Ceiling Type
G Lay-in Grid
F Flange with Wing Hangers
Ballast
NOTE: See Technical Section
for other ballast options.
E Electronic T8, Instant
Start
3E 3-Lamp Electronic T8,
Instant Start
4E 4-Lamp Electronic T8,
Instant Start
Lens
TG73 Tempered Glass,
Pattern 73
TG Tempered Glass
DR12 Pattern 12 Acrylic
Options
NYC NYC
Compliant
NYCU NYC
Compliant,
Union Label
Voltage
U 120V-277V
347 347V
Lens, Impact
Resistant, 0.140"
PP12 Pattern 12
Polycarbonate
Prismatic Lens
Product Availability
SIZE
NO. OF LAMPS
LAMP TYPE
HEIGHT
1' × 4'
2
3
32
32
5"
5"
2' × 2'
2
32U6
5"
2' × 4'
2
3
4
32
32
32
5"
5"
5"
5"
24"
HZ24-4
5"
12"
HZ14-2
89
CLEANROOM Guide
Cleanroom Lighting
What Makes a Cleanroom a Cleanroom?
EXTREME ENVIRONMENT
Nowhere in today’s technological manufacturing environment
is contamination control more important than in a cleanroom.
It has to be. The work done in cleanrooms is sensitive to even
invisible airborne particles. While standard air filters will
eliminate the airborne particles you can see, these only represent
about three percent. The remaining 97% are the particles upon
which cleanrooms are based.
In the typical manufacturing environment the air is literally full
of sub-micron particles. A mere cubic foot of air can contain from
200,000 to 10 million particles, most of which are generated by
workers and objects within the environment.
In a cleanroom, a single sub-micron particle can damage or
contaminate delicate work. Whether a cleanroom has to do with wafer fabs, electronics, pharmaceutical, medical, aerospace,
photographic, optical, or data processing, this danger is real and ever-present.
The conclusion is inescapable. Allow sub-micron particles to float harmfully about and production yields and product reliability
are at risk.
Achieving cleanliness in the demanding standards of a cleanroom is no easy task. It depends on a room design that restricts
the entry of contaminants and is easy to clean; it depends on precautions taken against contaminants generated by worker and
objects within the room; and depends on air filtration adequate to remove any contaminants so generated.
Design and engineering have made Columbia Lighting fluorescent luminaires
the proper choice for any class of cleanroom.
Columbia CRS luminaires have been used in the most demanding Class 1 cleanrooms, so they are therefore suitable for all classes.
The class is defined by Federal Standard 209 and is the maximum number of 0.5 micron particles in a cubic foot of air sampled
from the cleanroom with people, processes, and all components of the cleanroom system in place.
For less demanding applications, Columbia’s CRC series offers a more economical alternative. The CRC provides cleanroom
protection in environments rated Class 1000 or greater.
Cleaning a cleanroom fixture is never a problem. Smooth surfaces prevent dirt from accumulating, making cleanroom fixtures
easy to wash down. The smooth side of the lens is exposed to the work space.
All fixtures provide excellent photometrics, so fewer are required to light a given area.
All cleanroom fixtures have heavy-duty, 20 gauge steel housings. All have long-lasting, non-flaking, baked polyester powder coat
finishes, which are post-painted after luminaire housings are formed. Light reflecting surfaces have a 92% minimum reflectance
for optimum light control and photometric performance.
There are no universally recognized third party certifications for cleanroom luminaires – but if there were, our fixtures would
carry the label. Sealed units are UL listed for wet locations. Premium EPDM and silicone gaskets help ensure the tight seal, and
are standard.
Cleanroom Class
1
10
100
1000
10000
100000
90
0.1
35
350
N/A
N/A
N/A
N/A
Measured Particle Size (Micrometers)
0.2
0.3
0.5
7.5
3
1
75
30
10
750
300
100
N/A
N/A
1000
N/A
N/A
10000
N/A
N/A
100000
5.0
N/A
N/A
N/A
7
70
700
CRS
Cleanroom, Class 1
Features
Class 1 Cleanroom certified for any
application
•
UL listed 1598, cUL or CSA. Damp
Location standard, Wet Location option
•
1½" T- Bar standard, 1" or 2" optional
•
•
Recessed, flange trim, or surface
•
Anodized extruded aluminum door
frame
Meets Federal Standard No. 209E for
Class 1 cleanrooms and ISO 14644-1
Class 6 cleanrooms
•
One-piece, 18 gauge stainless or carbon
steel doors available
EXTREME ENVIRONMENT
•
Ordering Information
CRS
–
Model
CRS Cleanroom,
–
No. of Lamps in
Cross Section
–
Ceiling Type
G Lay-in Inverted
Ballast2
Door
FA Flush Aluminum
FCS Flush One-Piece
NOTE: See Technical Section
for other ballast options.
Class 1
1½" Grid
2 Two
E Electronic T8, Instant
F Flange with
Carbon Steel Door1
3 Three
Start
Wing Hangers
FSS Flush One-Piece
4 Four
1
3-Lamp Electronic T8,
Surface
Mount
3E
S
Stainless
Steel
Door
6 Six
Instant Start
See Product Availability
4E 4-Lamp Electronic T8,
table below.
Instant Start
Electronic T5 or T8,
EP
SIZE
Lamp Type
Lens
Programmed Start
14 1' × 4'
14 2', T5: 14 Watt
A12 Pattern 12 Acrylic Lens
3EP 3-Lamp Electronic T5HO
22 2' × 2'
17 2', T8: 17 Watt
A12125 Pattern 12 Acrylic Lens,
or T8, Programmed
0.125" Nominal
Start
24 2' × 4'
24 2', T5HO: 24 Watt
A12125M Pattern 12 Acrylic Lens, 4EP 4-Lamp Electronic
28 4', T5: 28 Watt
0.125" Minimum
T5HO (N/A 347V) or T8,
31U1 U-Bent, 1⅝" Leg Spacing T8:
Programmed Start
A19 Pattern 19 Acrylic Lens,
31 Watt
0.156" Nominal
Electronic Twin Tube,
EPTT
32 4', T8: 32, 30, 28 or 25 Watt
Programmed Start
RF12125 Pattern 12 Acrylic
32U6 U-Bent, 6" Leg Spacing T8:
Lens, Radio Frequency
32 Watt
Suppressed, 0.125"
Nominal3
40TT Twin Tube Compact, 2G11
Base: 40 Watt
SASRF Surgical Symmetric/
Asymmetric
54 4', T5HO: 54 Watt
Configuration with RFI
Grounding Overlay
Voltage
U 120V-277V
347 347V
Options
1T 1" T-Bar
2T 2" T-Bar (1' × 4'
and 2' × 4' only)
GLR Fast Blow Fuse4
RIF Radio Interference
Filter3, 4
WL Wet Location (N/A
with Emergency
Battery Pack)
NYC NYC Compliant
NYCU NYC Compliant,
Union Label
1
Not Available for 1½" or 2" grid, RF12125 or SASRF lens.
Ballasts may not be available in all combinations of lamp/voltage/starting temp/THD shown above.
Contact your local Columbia Lighting Representative for more details.
3
When using electronic ballasts, Radio Frequency Interference (RFI) cannot be blocked by an RFI filtering lens to the
levels specified by MIL std 461. RFI reflected back onto the primary line by the ballast can be blocked by this RFI filter.
4
One per ballast.
2
Grid
Product Availability
SIZE
NO. OF LAMPS
LAMP TYPE
HEIGHT
1' × 4'
2
3
28, 32, 54
28, 32
5¼"
5¼"
2' × 2'
2
3
4
14, 17, 24, 32U6, 40TT
14, 17, 24, 40TT
14, 17, 24
5"
5"
5"
2' × 4'
2
3
4
6
28, 32, 54
28, 32, 54
28, 32, 54
28, 32, 54
5"
5"
5"
5"
61/8"
Surface
5"
12"
CRS14-2
24"
2' × 2' and 2' × 4' End Section
5¼"
63/8"
12"
CRS14-2
24"
2' × 2' and 2' × 4' End Section
91
CRC
Cleanroom, Class 1000
EXTREME ENVIRONMENT
Features
•
Class 1000 Cleanroom certified
•
Low profile, 3½" depth
•
Choice of doors from steel to extruded
aluminum, open from either side
•
Diffuser easily removable for lamp access
and cleaning
•
Heavy gauge steel housing with
embossments for added strength
•
Mitered corners
•
All parts are powder coated white and
painted after fabrication
•
Spring loaded steel latches
•
Available in pendant mount and row
mounting arrangements
•
UL listed 1598, cUL or CSA. Damp
Location standard
Ordering Information
CRC
–
Model
CRC Cleanroom,
Class 1000
No. of Lamps
2 Two
3 Three
4 Four
(N/A in 1' × 4')
See Product
Availability table
below.
SIZE
14 1' × 4'
22 2' × 2'
24 2' × 4'
FA
–
Ceiling Type
G Lay-in Inverted
1" or 1½" Grid
32
32U6
40TT
54
Door
FA Flush Aluminum
Ballast
F Flange (Wing
Hangers)
Lamp Type
14
17
24
28
31U1
–
2', T5: 14 Watt
2', T8: 17 Watt
2', T5HO: 24 Watt
4', T5: 28 Watt
U-Bent, 1⅝" Leg
Spacing T8: 31 Watt
4', T8: 32, 30, 28 or
25 Watt
U-Bent, 6" Leg
Spacing T8: 32 Watt
Twin Tube Compact,
2G11 Base: 40 Watt
4', T5HO: 54 Watt
Shielding
A12 Pattern 12 Acrylic Lens
A12125 Pattern 12 Acrylic Lens,
0.125" Nominal
A12125M Pattern 12 Acrylic Lens,
0.125" Minimum
A19 Pattern 19 Acrylic Lens,
0.156" Nominal
Product Availability
5¼"
24"
CRC14-2
5¼"
24"
CRC22-2
5¼"
24"
CRC24-3
5¼"
24"
CRC24-2
92
Voltage
NOTE: See Technical Section for
U 120V-277V
other ballast options.
347 347V
E Electronic Instant
Start (Std.)
3E 3-Lamp Electronic T8,
Instant Start
4E 4-Lamp Electronic T8,
Instant Start
EP Electronic T5 or T8,
Options
Programmed Start
FO730 30K 75CRI T8 Lamps
3EP 3-Lamp Electronic
Installed
T5HO or T8,
FO735 35K 75CRI T8 Lamps
Programmed Start
Installed
4EP 4-Lamp Electronic
FO741 41K 75CRI T8 Lamps
T5HO (N/A 347V) or
Installed
T8, Programmed Start
2T Modified Housing for 2"
EPTT Electronic Twin Tube,
T-Bar
Programmed Start
C388 ⅜" Flex w/3 No. 18 Wires
C384 ⅜" Flex w/3 No. 14 Wires
C488 ⅜" Flex w/4 No. 18 Wires
C424 ½" Flex w/4 No. 14 Wires
GLR Fast Blow Fuse
WL Wet Location (N/A with
Emergency Battery Pack)
NYC NYC Compliant
NYCU NYC Compliant, Union
Label
5¼"
24"
CRC24-4
SIZE
NO. OF LAMPS
LAMP TYPE
HEIGHT
1' × 4'
2
3
28, 32, 34, 54
28, 32, 34
5¼"
5¼"
2' × 2'
2
3
4
14, 17, 24, 31U1, 32U6, 40TT
14, 17, 24
14, 17
5¼"
5¼"
5¼"
2' × 4'
2
3
4
28, 32, 34, 54
28, 32, 34, 54
28, 32, 34
5¼"
5¼"
5¼"
Morph
Fluorescent Exterior Area Lights
Features
Uses T5HO technology to get comparable light
levels of traditional 400W Metal Halide
•
One for one replacement with up to 56%
energy savings
Precision fabricated and formed aluminum
housing with high quality welded and ground
seams
•
•
•
Bi-level inboard/outboard switching saves
energy and meets new energy codes
Post production powder coat finish provides
excellent corrosion resistance and durability
•
Door frame opens easily to provide access from
below and secures tightly when closed
•
Heavy duty aluminum body provides excellent
heat dissipation and maximum ballast life
•
Light weight construction simplifies fixtures
replacement
•
International Dark-Sky Compliant
•
Optional sculpted look for architectural appeal
•
Forward throw optics reduce light trespass
•
UL 1598 Wet Location certified
O u t d oo r
•
MB
MC
Ordering Information
–
Model
MBA Box Sided
NO. of lamps
2 Two
4 Four
Area Light
MBW Box Sided
Mounting
Blank None
A8 Bolt On Arm
AA2 Adjustable 2⅜"
See Product Availability
table below.
Wall Mount
MCA Chamfered
Area Light
MCW Chamfered
Wall Mount
TG
–
Slipfitter Arm
–
Lens
TG Tempered
Distribution
MBA and MCA
5 Standard Optics
Glass
–
Voltage
U 120V-277V
HU 347V-480V
(4' fixtures only)
(Type V)
2R Forward Throw Optics
(Right hand, Type II*)
2L Forward Throw Optics
(Left hand, Type II*)
MBW and MCW
2 Forward Throw
Optics (Type II)
SIZE
2 2'
4 4'
Lamp type
24 2', T5HO: 24 Watt
54 4', T5HO: 54, 51,
Finish
DB Dark Bronze
BL Black
GR Gray
or 49 Watt
Ballast
2-Lamp
EP Electronic T5HO,
Options
F5841 41K 85CRI T5HO Lamps
Installed
Programmed Start
F5850 50K 82CRI T5HO Lamps
4-Lamp
4EP 4-Lamp Electronic
PBP Photocontrol Base and
T5HO, Programmed
Start, Switchable
(54W only)
Street Side
A8
HS
2R
Locking Photocell
PBC Photocontrol Base with
Locking Shorting Cap
Fast Blow Fuse
Slow Blow Fuse
House Side Shield
Occupancy Sensor
(Increases housing length)
NYC NYC Compliant
NYCU NYC Compliant, Union
Label
GLR
GMF
HS
OS
*Beam Direction
AA2
Installed
2L
House Side
Product Availability
9¾"
EPA Values
MOdel
NO. OF LAMPS In
Cross Section
LAMP
TYPE
Length
MBA2/MCA2
MBA4/MCA4
2, 4
2, 4
24
54
26.5"*
50.5"*
MBW2/MCW2
MBW4/MCW4
2, 4
2, 4
24
54
26.5"*
50.5"*
*OS option adds 3" to housing length.
MOdel
Single
Twin
@
90°
Twin
@
180°
Triple
@
90°
Triple
@
180°
Quad
@
90°
MBA2
MBA2 w/OS
1.6
1.7
3.2
3.5
3.2
3.5
4.7
5.2
4.7
5.2
6.3
7.0
MB Standard Optics
MCA2
MCA2 w/OS
1.5
1.6
2.9
3.2
2.9
3.2
4.4
4.8
4.4
4.8
5.8
6.4
9¾"
MBA4
MBA4 w/OS
2.7
2.9
5.4
5.7
5.4
5.7
8.1
8.6
8.1
8.6
10.8
11.4
MCA4
MCA4 w/OS
2.5
2.6
5.0
5.3
5.0
5.3
7.5
7.9
7.5
7.9
10.0
10.6
AA2
0.5
1.0
1.0
1.5
1.5
2.0
A8
0.3
0.6
0.6
0.9
0.9
1.2
9¾"
6½"
MB Forward Throw Optics
(Right hand shown)
9¾"
6½"
MC Standard Optics
6½"
6½"
MC Forward Throw Optics
(Right hand shown)
See Wind Speeds table on page 611.
93
Morph™ ACCESSORIES
Catalog No.
O u t d oo r
Item
Description
WMB-XX1
Wall mount bracket
TA-4-XX1
Tenon Mount Adaptor - 4" Square Pole to 2⅜" OD Tenon
TA-5-XX1
Tenon Mount Adaptor - 5" Square Pole to 2⅜" OD Tenon
TA-6-XX1
Tenon Mount Adaptor - 6" Square Pole to 2⅜" OD Tenon
PTA190-XX1
Pole Top Adaptor - Single 2⅜" OD Tenon
PTA2180-XX1
Pole Top Adaptor - Double 2⅜" OD Tenon, 180°
PTA290-XX1
Pole Top Adaptor - Double 2⅜" OD Tenon, 90°
PTA390-XX1
Pole Top Adaptor - Triple 2⅜" OD Tenon, 90°
PTA3120-XX1
Pole Top Adaptor - Triple 2⅜" OD Tenon, 120°
PTA490-XX1
Pole Top Adaptor - Quad 2⅜" OD Tenon, 90°
PTASSA8-XX1
8" Pole Top Adaptor - 2⅜" OD Tenon to Bolt On Arm, EPA .4
TP
1
Twist Lock Photocell
Colors for accessories are DB-Dark Bronze, BL-Black, or GR-Gray.
Pole
Height
Poles
SSS-16-40-1-RDC:
16' high straight
steel pole 4" square
SSS-20-40-1-RDC:
20' high straight
steel pole 4" square
SSS-25-40-1-RDC:
25' high straight
steel pole 4" square
SSS-30-50-7-RDC:
30' high straight
steel pole 5" square
Wind Load Rating
80
90
100
MPH MPH MPH
ft.
m
Nominal
Shaft
Dim.
16
4.9
4
19.5
14
10.5
20
6.1
4
13.5
9.5
25
7.6
4
8.5
30
9.1
5
18
70
MPH
Bolt
Circle
Pole
Bolt Wt.
Proj. (lbs)
120
MPH
Wall
Thick.
(Sugg.)
Bolt
Circle
Bolt (Sq.)
Base Plate
(Sq.)
Anchor
Bolt Size
7.5
4
0.119
11"
8-11"
5.6-7.8"
10¼ × ¾"
¾ × 30 × 3"
4"
128
6.5
4.5
1.8
0.119
11"
8-11"
5.6-7.8"
10¼ × ¾"
¾ × 30 × 3"
4"
160
5
3
1.5
NR
0.119
11"
8-11"
5.6-7.8"
10¼ × ¾"
¾ × 30 × 3"
4"
238
12
8
4.5
NR
0.179
11"
1013.5"
7.1-9.5"
12 × 1"
1 × 36 × 4"
4"
398
All poles are painted Dark Bronze and are drilled on all four sides with our #2 and #6 pattern.
They include: Poles Shaft, Anchor Bolts, Pole Cap, Anchor Bolt Template, Anchor Base Covers
See additional Spaulding pole offerings on pages 610-625.
See Wind Speeds table on page 611.
Anchor Bolt Detail Base Program
Anchor Rod
Hex Nut
Anchor Bolt
Location in
Relation
to Shaft
Rotation
Plain Washer
Base Plate
Grout Finish Grade
Bolt Projection
Plain Washer
Hex Nut
Grout after pole is set
and plumbed
Foundation Level
94
Handhole
Straight Square
and Tapered Poles
Engineering of
footing by others
Bolt Circle
Bolt Square
SLA
Outdoor Sign and Façade Luminaire
Features
Wet location sign light can be mounted in any
direction and still operate properly and retain
its wet location approval
•
Asymmetric reflector provides outstanding
distribution for a crisp clean appearance
360° aiming provides illumination for
signage, eye-catching highlights to facilitate
flow of foot traffic or grazing angles for added
definition to architectural features
•
•
•
Choice of lamps allows maximum flexibility
for any application
Extruded aluminum reflector available in
white or anodized gray finish
•
Easy to aim with adjustable nut, stays in
place with die cast ends, that interlock with
cast socket housing
•
Outdoor ballast box is standard, indoor box
available for lamps
•
Integrated ballast used for T5 lamping (damp
location only)
O u t d oo r
•
Ordering Information
SLA
–
Model
SLA Outdoor
1
–
No. of lamps In
Cross Section
1 One
Sign and
Façade
Luminaire
–
options
DR High Impact Lens
ANO Anodized Diffuse
Exterior (Gray)
Lamp type
SIZE 1
4 4'
6 6'
8 8'
32
48
48HO
72
72HO
96
96T8
96HO
96T8HO
4', T8: 32, 30, 28 or 25 Watt
4', T12: Slimline
4', T12: High Output
6', T12: Slimline
6', T12: High Output
8', T12: Slimline
8', T8: 59 Watt
8', T12: 110 or 95 Watt
8', T8: 86 Watt
–
Lamp Type
No. of lamps
OPerated
1 One
2 Two
Voltage
U 120V-277V (T8
See housing
Lamp Type.
and T5 only)
347 347V
Ballast Box Model
SLBB Standard Ballast Box
Ballast
E Electronic T8, T12 or Slimline
SLBI Indoor Ballast Box T8
EP Electronic, Programmed Start
(Outdoor vertical mount)
(N/A in HO), Instant Start
OPtions
GRAY Gray Ballast
Box (Std.
White)
NYC NYC
Compliant
NYCU NYC
Compliant,
Union Label
Electronic ballast remote
mounting lead lengths vary.
Contact factory.
Ordering Information (T5)
SLA
4
Model
SLA Outdoor
–
No. of lamps In
Cross Section
1 One
SIZE 1
4 4'
Sign and
Façade
Luminaire
1
–
Lamp Type
28 4', T5: 28 Watt
(Indoor only)
54 4', T5HO: 54
–
options
Blank Gloss White
ANO Anodized
or 51 Watt
(Indoor only)
Diffuse
Exterior
(Gray)
EP
Ballast
EP Electronic,
Programmed
Start
Voltage
U 120V-277V (T8
and T5 only)
347 347U
1
Sizes shown are based on nominal housing lengths. Where units will be mounted in rows, please provide row information. E.g. One 16' row consisting of (4) SLA4-154-EPU.
Product Availability
NO. OF LAMPS in
Cross section
No. of Lamps
in Fixture
LAMP TYPE
Width
Length*
HEIGHT
4'
1
1
1
1
28, 32, 54
48HO
53/16"
53/16"
51¼"
49¼"
33/16"
33/16"
6'
1
1
72HO
53/16"
73¼"
33/16"
8'
1
1
96T8, 96HO
53/16"
97¼"
33/16"
SIZE
*Length is measured center-to-center on mounting arms.
Reflector shield with
adjustable shield ends.
End socket housings
sealed to keep out
moisture.
Conduit supplied by
others. Seal conduit
thread with sealing
compound.
Gasket cemented in socket
housing cover.
Neoprene sleeves
provide watertight
seal between lamp
and socket housing.
UL Reflector end block.
Optional plastic shield. Recommended
for severe cold weather condition.
53/16"
33/16"
2½"
95
Accessories
Mounting Accessories
Surface Mount Hangers
Technical
Surface Mount Hangers
Cat. No.
ITB-4
CS-2
CS-4
For Use With
All surface mounted fixtures
Ceiling spacer for mounting directly to outlet box. Used for
mounting fixtures below combustible low density cellulose
fiberboard ceilings. Maintains 1½" spacing.
All purpose spacer (1½" × 2¼" × 4"), maintains 1" spacing
on any type of installation
All surface mounted fixtures
All surface mounted fixtures
CS-5
All purpose spacer with special T-Bar clip and stud for
All surface mounted fixtures
mounting to an inverted T-Bar ceiling. Maintains 1½" spacing.
CSZT
KZT
Zip tee hanger 1½" spacer. Designed for 15/16" wide T-Bars.
Zip tee hanger 1½" spacer. Designed for 15/16" wide T-Bars.
CS and CSR series
K, KL, KL-V, and KT
CSTH
Slide tong hanger for ungrooved channel. Maintains 1½"
spacing.
CS and CSR series
KTH
Slide tong hanger with ⅞" hole. Maintains 1½" spacing.
K, KL, KL-V, and KT
LHVTH
Slide tong hanger with ⅞" hole.
LHV
LHSH6
LHSH4
Slide tong hanger with 9/16" holes
Slide tong hanger with 9/16" holes
LHR 6-Lamp fixtures
LHR 4-Lamp fixtures
End surface mounting bracket for 2H3S hub options
End surface mounting bracket for 2H and 2HS hub options
LUN, LU, FNPS
FNPV, FNPS
End surface mounting bracket with 90° adjustment for 2H3S
hub options
End surface mounting bracket with 90° adjustment for 2H and
2HS hub options
Surface mounting bracket, 304 Stainless steel, 2 brackets
Surface mounting bracket, 304 Stainless steel, 3 brackets
LUN, LU, FNPS
PEBU
PEBUHSMS
PEBA
PEBAHSMS
PTBS
PTBS3
PTBA
PTBA3
FSPHB
FSPHWA
96
Description
Hanger for mounting close to ceiling on T-Bar grid system
Surface mounting bracket, 304 Stainless steel, wall mount
with 90° adjustment in 15° increments, 2 brackets
Surface mounting bracket, 304 Stainless steel, wall mount
with 90° adjustment in 15° increments, 3 brackets
Top bracket suspension kit, 304 Stainless Steel
Top bracket wall/angle kit, 304 Stainless Steel
FNPV, FNPS
FNPV, FNPS, FDPS, FNPH, FDPH
FNPV, FNPS, FDPS, FNPH, FDPH
FNPV, FNPS, FDPS, FNPH, FDPH
FNPV, FNPS, FDPS, FNPH, FDPH
FSPH
FSPH
Accessories
Mounting Accessories
Chain and Cable Hangers
Chain and Cable Hangers
Cat. No.
For Use With
LUN, LU
SSHK
Stainless Steel hanging kit (chain not included)
LU
CSHC
Chain hanging assembly includes two 24" lengths of chain and two
hanger hooks.
Chain hanging assembly includes two 24" lengths of chain and two
hanger hooks.
Chain hanger assembly, #3 size double loop chain, 12'.
Cable hangers, #2 size cable with loop-end, 5', 10', and 20'
lengths, adjustable
CS and CSR
Y-Fit Hook Cable Hangers, #2 size cable, 5', 10', and 20' lengths,
adjustable
LHV
Single point mount cable with canopy kit, pair.
(Feed and non-feed ends) 24" or 48" with barrell adjuster.
STP. Others may require field
drilling of mounting holes.
KHC
ICHC
GLH5
GLH10
GLH20
LHVQM5
LHVQM10
LHVQM20
CM24
CM48
Technical
Description
Chain hanging (chain not included)
LUNHK
K, KL, KL-V, and KT
IC
All industrials
Pendant/Stem Mounting Accessories
Pendant/Stem Mounting
Cat. No.
Description
For Use With
HUBK
Stem hanging kit consists of two die cast hubs, two “O” rings and LUN, FNPV, LU, FNPS, FNPH, FDPH
locknuts. Hubs are threaded for ½" pipe. Housings must be drilled
to install hubs.
S18D
Double canopy (2) 18" stems
All 4' RO and PT
SB3
Stem hanger adaptor bracket for 3-lamp surface mounted units.
Reduces total number of mounting points required.
MWW 3-lamp
EWW 3-lamp
AWW 3-lamp
WCW 3-lamp
S18
SS18
C18
SO18
Swivel canopy, one 18" stem - all white finish, 8° swivel
Swivel canopy, one 18" stem - all white finish, 45° swivel
Swivel canopy only - all white finish, 8° swivel
One 18" stem only - all white finish
Individual or continuous row
mounting of most surface and
industrial fixtures
97
Accessories
Industrial and Striplight Accessories
Reflector accessories and Wireguards
Technical
Chain Hangers
LHVWG-6 shown
Cat. No.
Description
For Use With
KLRAC
KLVRAC
Full range aligners (set of two) for aligning reflector flanges and
closing gaps between two reflectors. White
KL
KL-V
KLEC
Reflector end closure (per end). Baked white enamel
KL and KL-V
KC2
Heavy duty 10" sleeve coupler
K, KL, KL-V, KT and CSR (HO)
Wireguard, white, 4-lamp LHV
Wireguard, white, 6-lamp LHV
Wireguard, white, 4-lamp LHR
Wireguard, white, 6-lamp LHR
Wireguard, white, LHR Narrow Body
Wireguard, chrome, LHEM fixtures
Wireguard, chrome, LHEW fixtures
4 ft. Wireguard, white
LHV 4-lamp
LHV 6-lamp
LHR 4-lamp
LHR 6-lamp
LHR Narrow
LHEM
LHEW
IC
KL
CSR
CSR
CSR
CS
CS
K, CS
CH
CH
CH
KL (not available with KL-V)
LHVWG-4
LHVWG-6
LHRWG4K
LHRWG4K
LHRNWG
LHEMWG
LHEWWG
ICWG4
KLWG4
CSRWG4-4PK
CSRWG2-4PK
CSRWG3-4PK
CSWG2-24PK
CSWG3-12PK
CSWG4
CHWG2-12PK
CHWG3-12PK
CHWG4-12PK
KLEGG
KLFSA12
2 ft. Wireguard, chrome colored finish
3 ft. Wireguard, chrome colored finish
2 ft. Wireguard, chrome colored finish
3 ft. Wireguard, chrome colored finish
4 ft. Wireguard, chrome colored finish
2 ft. Wireguard, chrome colored finish
3 ft. Wireguard, chrome colored finish
4 ft. Wireguard, chrome colored finish
Metal egg crate louver, 4 ft., White
Two required for 8 ft. fixtures
Framed acrylic shielding. Two required for 8 ft. units.
Cannot be combined with the KLWG4
KL (not available with KL-V)
Sensor Accessories for Industrial and Strip Fixtures¹
High bay, Industrial and Strip Fixture Accessory Offering
(Includes snap on extension adaptor*)
• Digital passive infrared (PIR) sensor
• Unique Smart Cycling™ for improved lamp life,
dual output version only
• Single and dual timer operation
• Supports mounting heights up to 45 ft.
• Photosensor version available for daylight
harvesting
• Kit includes “plug and play” wiring that enables
use with standard fixtures
LHV Sensor Accessory Offering*
(Includes easy to install LHV snap on bracket)
LHVOS1 LHVOS2 LHVOS480 LHVODS1 LHVODS2 LHVODS480
LHV Occupancy sensor kit, 120/277/347V, one relay
LHV Occupancy sensor kit, 120/277/347V, two relay
LHV Occupancy sensor kit, 480V, one relay
LHV Occupancy sensor kit with daylight harvesting photosensor,
120/277/347V, one relay
LHV Occupancy sensor kit with daylight harvesting photosensor,
120/277/347V, two relay
LHV Occupancy sensor kit with daylight harvesting photosensor,
480V, one relay
*Factory installed sensor options available with LHV fixture, see page 60.
98
OS1K
OS2K
OS480K
ODS1K
Occupancy sensor kit, 120/277/347V, one relay
Occupancy sensor kit, 120/277/347V, two relay
Occupancy sensor kit, 480V, one relay
Occupancy sensor kit with daylight harvesting photosensor,
120/277/347V, one relay
ODS2K Occupancy sensor kit with daylight harvesting photosensor,
120/277/347V, two relay
ODS480 Occupancy sensor kit with daylight harvesting photosensor,
480V, one relay
*Extension adaptor needed when the height of the edge of the ballast cavity
knockout is greater than or equal to 1.5" from bottom side of housing or reflector
*Extension adaptor should be used to position the sensor below the bottom of the
reflector for full field of view coverage
1
Programmed start ballasts recommended for use with sensor accessories.
Accessories
Reflector Accessories
Reflectors for CH 1-Lamp Channels
Technical
3⅝"
3⅝"
6⅜"
411⁄16"
Symmetric
CHR2 Symmetric reflector for 2' fixtures.
CHR3 Symmetric reflector for 3' fixtures.
CHR4 Symmetric reflector for 4' fixtures
Asymmetric
CHRA2 Asymmetric reflector for 2' fixtures.
CHRA4 Asymmetric reflector for 4' fixtures.
CHR and CHRA reflectors are secured to channel with sheet metal screws provided.
CHR and CHRA reflectors are pre-finished with baked enamel, 86% minimum reflectance.
Polyester powder coat paint after fabrication (PAF) available as option.
Reflectors for CS and K 1- or 2-Lamp Channels
3⅝"
3⅝"
11"
7⅝"
Symmetric - CSR4
Symmetric reflector for 4' fixtures (order two for 8' units).
Center saddles are required for 8' channels.
For CS channel order center saddle CSSAD. For K channel order center saddle KSAD. Asymmetric - CSRA4
Asymmetric reflector for 4' fixtures (order two for 8' units).
Center saddles are required for 8' channels.
For CS channel order center saddle CSSAD.
For K channel order center saddle KSAD.
CSR and CSRA reflectors are attached with captive quarter turn fasteners included.
CSR and CSRA reflectors are pre-finished with baked enamel, 86% minimum reflectance.
Polyester powder coat paint after fabrication (PAF) available as option.
Reflectors for SS 1 or 2-Lamp Staggered Strips
83/4"
39/16"
SSR
Symmetric
(2 pieces)
67/16"
63/4"
39/16"
SSRA
Asymmetric
(1 piece)
5"
518/32"
47/16"
47/16"
SSRAK
Asymmetric Kicker
(1 piece only)
SSRD
Symmetric Deep
(2 pieces)
SSRDA
Asymmetric Deep
(1 piece)
Ordering Guide: Show reflector as option on strip catalog number. (Example: SS4-132SYM-EU-SSR)
Notes
1.Symmetric reflectors consist of two pieces.
2.Asymmetric reflectors consist of one piece.
3.Adjustable housings require 4' reflectors for field adjustment.
4.Use of reflector(s) on staggered strip requires modification to strip housing. Bulk reflectors should not be ordered except as replacements.
5.Reflectors attach with sheet metal screws, provided.
Reflectors are pre-finished with baked white enamel, 86% minimum reflectance.
Polyester powder coat paint after fabrication (PAF) available as option.
99
Recessed Options
Air Handling
Basic Air Functions
Technical
Designation
Description
Air Function
-S
Static
No air flows through fixture.
-A
Air Supply/Return
Air flows into room from plenum or back into plenum from room. We provide slots in housing.
For optional vanes, see below.
-H
Heat Extract
Slots are provided in end cap or back of housing (instead of through black reveal). Units
without a black reveal feature slots in door for air passage to lamp compartment. For optional
dampers, see below.
-C
Combined
Both the -A and -H functions above are combined in one unit.
Supply
Return
Extract Through End Cap
Note: Some units extract air through
back of fixture housing.
Air Function Control Options
Vanes (V) Also referred to as air pattern blades or directional air vanes.
Vanes work with supply/return air (-A or -C). Vanes open outward, from 0 to 90 degrees, like a door swinging open. To control air flow, adjust
opening as desired or close completely. When used on a -C fixture, vanes operate independently of dampers.
Dampers (D) Also referred to as heat removal dampers or control dampers.
Dampers work with extract air (-H, -C). Dampers slide open, like a window. To control air flow, adjust opening as desired or close entirely. When
used on a -C fixture, dampers are controlled independently of vanes.
Designation
Description
Designation
Description
-AV
Air Supply/Return with Vanes
-HD
Heat Extract with Dampers
-CV
Combined with Vanes Only
-CD
Combined with Dampers Only
-CVD
Combined with Vanes and Dampers
Black Reveal
Slide Direction
Slider Panel (inside)
Knockouts (3)
Slide Panel Screws (2)
Vane (open)
Open Vent Holes
Black Reveal with slot and
vane open (vane hidden)
Air with Vanes (Supply/Return Options)
100
Dampers (Extract Option)
Recessed Options
Ceiling Trims
Ceiling Type
Recommended Trim
1" T-Bar
G (Grid)
Cross Section
Availability
Technical
45, 4PS, 4VS, 5PA, AC, BR, CRC,
CRF, CRS, EMI, EMSE, EMX, EPC,
FW, HC, HH, HV, JT8, STE, STEL,
STS, STSL, TRA, VC, VHC, WT, ZPT
For lay-in installation in exposed grid ceilings.
Maximum tee widths of 1" and maximum tee
heights of 1½" allowed.
9⁄16" Slot Grid
SG (Slot Grid)
45, 5PA, BR, HC, P4, PW, STS, STSL
For slot grid type ceilings with nominal 9⁄16" face
and ⅜" tall shoulder, louver will be level with the
ceiling plane.
Hard Ceiling
F (Flange)
45, 4PS, 4VS, 5PA, AC, CRC, CRS,
HC, HH, HV, HZ, LHG, M46, P2, P4,
ST8, VHC, WT
NP and CRC series flange use yoke
hanging system (not illustrated).
For tile, plaster, or plasterboard type ceilings.
Overlapping extruded aluminum trim conceals
edges of ceiling opening. Wing hanger suspension
system included. Designate INT (intermediate) or
EOR (end of row) for fixtures in row applications.
1" Tee across fixture
ends. Supplied side trim
support ceiling tile along
length
GT (Integral Cross -tee)
For fixtures not available with
integral (F) flanges, order (G) trim
with corresponding Flange Kit (see
pg. 106)
4594, BR04, NP, PVHC94, VHC94
For lay-in installation in grid ceilings. Fixture
mounts on exposed tees at ends of fixture.
Sides act as integral cross-tee to support tile,
eliminating need for intermediary tees. Designed
for nominal 1" tees.
Metal Pan
M (Modular)
45, 4PS, 4VS, 5PA, HC, LHG, P2, P4
For metal pan ceilings “Fit-in” style extruded
trim aligns with modular tile joints. Fixture is
supported from concealed suspension and includes
all adjustable wing hangers.
Recessed units available for Surface Mount (SM) applications:
45, BR, CRS, EMS, EPC, FW, HC, LHG, LSL, P2, P4, PW, STR, STRL, STS, STSL, VHC, ZPT. Refer to ordering guide to build.
101
Recessed Options
Flange Trims
Max.
Technical
Min.
Recessed Opening
Overall Trim
Dimensional Example
Parabolics
Rough-In Dimensions
Specify option INT (intermediate) or EOR (end of row).
Vertical Wing
Hanger Adjust
Overall Trim
Dimensions
Single
or Row
Single
Unit
Row Length
Series
Size
Min.
Max.
Width
Length
Width
Length
Nom.
Length
P4, HC
1' × 4'
2' × 2'
2' × 4'
1' × 4'
2' × 2'
2' × 4'
9" × 4'
1¼"
1"
1"
1"
1"
1"
2"
4¼"
3⅞"
3⅞"
3¼"
3⅞"
3⅞"
4"
1213⁄16"
2413⁄16"
2413⁄16"
1213⁄16"
2413⁄16"
2413⁄16"
10½"
4813⁄16"
2413⁄16"
4813⁄16"
4813⁄16"
2413⁄16"
4813⁄16"
48¾"
12⅛"
24⅛"
24⅛"
12⅛"
24⅛"
24⅛"
9⅞"
48⅛"
24⅛"
48⅛"
48⅛"
24⅛"
48⅛"
48⅛"
48"
24"
48"
48"
24"
48"
48"
45
VHC, PVHC
Lensed Troffers
Multiply
by
Plus
Example
# in row
# in row
# in row
# in row
# in row
# in row
# in row
⅛"
⅛"
⅛"
⅛"
⅛"
⅛"
⅛"
(48" × 2) + ⅛" = 96⅛"
(24" × 2) + ⅛" = 48⅛"
(48" × 2) + ⅛" = 96⅛"
(48" × 2) + ⅛" = 96⅛"
(24" × 2) + ⅛" = 48⅛"
(48" × 2) + ⅛" = 96⅛"
(48" × 2) + ⅛" = 96⅛"
Rough-In Dimensions
Specify option INT (intermediate) or EOR (end of row).
Vertical Wing
Hanger Adjust
Series
4PS, 4VS
5PA
ST8, WT
CRS (FA Door)
CRS (FCS & FSS
Door)
CRC
102
Size
Min.
1' × 4'
⅞"
2' × 2'
2' × 4'
1' × 4'
2' × 2'
2' × 4'
1' × 4'
2' × 2'
2' × 4'
1' × 4'
2' × 2'
2' × 4'
1' × 4'
2' × 2'
2' × 4'
1' × 4'
2' × 2'
2' × 4'
1"
1"
⅞"
1¼"
1"
1"
1"
1"
13/4"
13/4"
13/4"
13/4"
13/4"
13/4"
35/8"
35/8"
35/8"
Overall Trim
Dimensions
Single
or Row
Single
Unit
Row Length
Width
Length
Width
Length
Nom.
Length
3"
12¾"
48¾"
12⅛"
48⅛"
48"
2⅞"
2⅞
3"
2⅞"
2⅞"
33/16"
33/16"
33/16"
41/2"
41/2"
41/2"
41/2"
41/2"
41/2"
41/8"
41/8"
41/8"
24¾"
24¾"
12¾"
24¾"
24¾"
12¾"
24¾"
24¾"
1215/16"
2415/16"
2415/16"
1211/16"
2411/16"
2411/16"
12¾"
24¾"
24¾"
24¼"
48¾"
48¾"
24¼"
48¾"
49⅝"
24⅝"
49⅝"
4911/16"
243/4"
4911/16"
487/8"
247/8"
487/8"
483/4"
243/4"
483/4"
24⅛"
24⅛"
12⅛"
24⅛"
24⅛"
12⅛"
24⅛"
24⅛"
111/4"
231/4"
231/4"
12"
24"
24"
12"
24⅛"
24⅛"
24⅛"
48⅛"
48⅛"
24⅛"
48⅛"
48⅛"
24⅛"
48⅛"
481/4 "
241/4"
481/4"
481/4"
241/4"
481/4"
48"
24⅛"
48⅛"
24"
48"
48"
24"
48"
48"
24"
48"
48"
24"
48"
48"
24"
48"
48"
24"
48"
Max.
Multiply
by
Plus
Example
# in row
⅛"
(48" × 2) + ⅛" = 96⅛"
# in row
# in row
# in row
# in row
# in row
# in row
# in row
# in row
# in row
# in row
# in row
# in row
# in row
# in row
# in row
# in row
# in row
⅛"
⅛"
⅛"
⅛"
⅛"
⅛"
⅛"
⅛"
⅛"
⅛"
⅛"
⅛"
⅛"
⅛"
⅛"
⅛"
⅛"
(24" × 2) + ⅛" = 48⅛"
(48" × 2) + ⅛" = 96⅛"
(48" × 2) + ⅛" = 96⅛"
(24" × 2) + ⅛" = 48⅛"
(48" × 2) + ⅛" = 96⅛"
(48" × 2) + ⅛" = 96⅛"
(24" × 2) + ⅛" = 48⅛"
(48" × 2) + ⅛" = 96⅛"
(48" × 2) + ⅛" = 96⅛"
(24" × 2) + ⅛" = 48⅛"
(48" × 2) + ⅛" = 96⅛"
(48" × 2) + ⅛" = 96⅛"
(24" × 2) + ⅛" = 48⅛"
(48" × 2) + ⅛" = 96⅛"
(48" × 2) + ⅛" = 96⅛"
(24" × 2) + ⅛" = 48⅛"
(48" × 2) + ⅛" = 96⅛"
Recessed Accessories
Flange Kit and Plaster Frame Information
Flange Kits
Technical
Flange kits are extruded aluminum frames that act as individual fixture T-Bar frames to support the weight of any G (grid) trim recessed fixture
in drywall or plaster ceilings. Kits snap together without the use of tools (18 gauge galvanized corner clips provided) and are hung by tie wire
(by others) from the ceiling support structure.
From the room side flange kits mimic the appearance of T-Bars in a baked white enamel finish. Consult chart for ceiling cut out dimension.
For continuous row applications order flange kits plus one FKCR, continuous row flange connector kit, for each joint between fixtures.
(One less than the number of fixtures in the row.)
Flange Kit
Catalog No.
Size
FK14
1' × 4'
FK22
2' × 2'
FK24
2' × 4'
FK44
4' × 4'
FK81
8" × 1'
FK82
8" × 2'
FK84
8" × 4'
Ceiling Opening
Width
Length
12⅜"
48⅜"
24⅜"
24⅜"
24⅜"
48⅜"
48⅜"
48⅜"
8⅜"
12⅜"
8⅜"
24⅜"
8⅜"
48⅜"
FKCR
Flange Kit Installation Instructions
Corner Clip
Side Rail
End Rail
1.Cut ceiling opening to proper dimensions.
Slip fit corner clips into side and end
rails. No tools are required.
2.Place Flange Kit in ceiling opening and
wire each corner to ceiling structure.
Pull up tight against ceiling.
3.Place grid trim troffer in Flange Kit.
Plaster Frames
Plaster frames are galvanized steel rails used to trim ceiling openings primarily in wet plaster applications. They are installed during
ceiling construction and help maintain the correct opening dimensions for installation of flange ST8 trimmed recessed fixtures. See fixture
specification sheet for dimensions required for framing to support the weight of the fixture.
Use plaster inside dimensions for framing opening in dry ceilings.
Framing (by others) required to support the weight of the fixture.
Catalog No.
PL14
PL14R
PL22
PL24
PL24R
PL44
Description
Individual
For Rows
Individual
Individual
For Rows
Individual
Nominal Size
1' × 4'
1' × 4'
2' × 2'
2' × 4'
2' × 4'
4' × 4'
Inside Dimension
12" × 48⅞"
24" × 24⅞"
24" × 48⅞"
48" × 48⅞"
1⅜"
¾"
Plaster Frames:
• For mounting any Columbia Lighting flanged troffer
in a plaster ceiling
• Provides a clean, finished appearance
103
Standards Compliance
Technical
How to Achieve a Fire Rating
UL publishes a book called The Fire Resistance Directory each February. A supplement is issued each August. The Fire Resistance Directory
contains instructions for fire rated ceiling systems. Each approved ceiling system has a design number. The fire rated ceiling system is achieved
by selecting a design number and following instructions, which include spacing criteria, enclosure requirements, and so on. When complete, the
system carries a rating (for example: one hour). FR option provides a label indicating the fixture is suitable for use in such ceiling systems. Many
ceiling designs required an enclosure or "tent" of fire resistant material over the back of the fixtures. These enclosures are either built on-site,
sometimes of ceiling tile material, or purchased as one-piece molded covers.
Fire Rated Troffers: Debunking the Myth
Fire Rated Label
What is a fire rated label?
This fixture is equipped with premium low
heat ballasts to prevent ballast cycling when
installed in a fire rated ceiling system. This
fixture is compatible with UL Fire Rated Ceiling
designs when installed in accordance with the
UL Fire Resistance Directory.
Columbia Lighting can provide a fire rated label (FR option) which states that our recessed
light fixtures are manufactured in accordance with UL1598 and, therefore, can be installed
in a fire rated ceiling system. There are no additional requirements of a recessed fixture in
order for it to be used in a fire rated design.
I need a fire rated troffer.
A true fire rated troffer does not exist because UL does not list troffers as “fire rated”.
Instead, they list ceiling systems which may include UL listed troffers as part of that system.
But my inspector says I need one.
Your inspector has authority and jurisdiction over your project. However, a better understanding of the fire rated ceiling system process can help
in your discussions. Order the FR option where required by local authorities.
I remember fire rated troffers from jobs past.
UL listed three ceiling designs using a special fire rated troffer many years ago. Columbia Lighting (and a few others) offered this troffer, which
consisted of a recessed unit with a sheet of fire resistant material attached to the back of it. Since all three ceilings have been obsolete for
decades (some exceptions in Canada), Columbia Lighting no longer manufactures this troffer. Instead, we manufacture in accordance with UL
1598, which allows our recessed fixtures to be installed in a fire rated ceiling system.
Fire Rated Enclosures
An FR label does not indicate whether or not “tenting” of the fixtures is required; all installation must be in accordance with the UL Fire Rated
Ceiling design.
T-Bar Lock Clips
Four integral T-Bar lock clips are standard on many Columbia Lighting recessed fixtures. Integral clips are built according to the rigorous
demands of UL 1598. Where integral clips are not available, a parts bag is provided containing two clips for attachment to the housing
structure. Four clips are available upon request.
Integral Clip
Fixture is equipped with integral T-Bar Clips
at each end. To engage T-Bar, bend clip
outward and lock under T-Bar.
Non-integral Clip
For installation in the following
NEMA ceiling types: -G -GR -NFG -NFSG -SS
Damp and Wet Location Labels
Columbia fixtures will be labeled suitable for installation in damp locations (most fixtures) or wet locations (select extreme environment
and outdoor fixtures) as called out on the specification sheets. Installation of a dry-location listed customer specified component such as an
emergency inverter requires the fixture to be labeled for dry location use only.
Ballast Disconnect
All Columbia fixtures are in compliance with NEC and CEC requirements for ballast disconnects by including integral ballast disconnects in
required fixtures.
The following fixtures are excluded from the ballast disconnect requirement:
• Hazardous location fixtures—HZ, FNPH, FDPH, FSPH, CRS (with D2 option)
• Fixtures with emergency battery pack options
CIRCLE I UL STANDARD 1958
All Columbia fixtures are in compliance with UL Standard 1598, Clause 8.8.1, which reads as follows:
“A luminaire with instant-start ballast(s), incorporating bi-pin lampholders shall:
a) Be constructed with a ballast(s) identified as Type CC, or
b) Be constructed with lampholder intended for use with instant-start ballasts in accordance with Clause 4.1.
Lampholders marked with a circle “I” comply with these requirements.”
104
Ballast Options
Ballast Types
Ballast Types
Electronic Ballast Types
Start Method
Definition
Electronic Instant Start
Strikes lamp without filament preheating. Lowest
wattage draw option for applications without
control systems. Used for T8 bi-pin and slimline
lamp types. Ballasts for F32T8 full or reduced
wattage lamps are NEMA Premium qualified.
Electronic Programmed Start
Electronic Step Dimming
Electronic Full Dimming
Recommended for frequently switched
applications including occupancy sensor
controlled lighting because programmed filament
preheating can help extend lamp life. Remote
mounting distance more restricted than with
instant start. Sometimes called programmed rapid
start. Available for all 2-pin lamp types. Ballasts
for F32T8 full or reduced wattage lamps are NEMA
Premium qualified.
Electronic programmed start ballast with two
hot leads to allow both lamps to switching
between 100% and 50% light levels for energy
management. Requires two switched leads from
same panel. Not suitable for remote mounting.
2-lamp ballasts.
Responds to either line voltage or low voltage
signals to dim lamps from 100% to 10% or lower,
depending on model. Many ED ballast types
require voltage specified. Not suitable for remote
mounting.
Designation
E
Characteristics
Standard (.87-1.0 BF)
E104
EnergyMax 1.04 BF
EHL
High light output
(1.18-1.2 BF)
ELW
Low wattage (.77-.78 BF)
ETT
Twin Tube lamp types
EP
Standard, 0.88 BF
EPTT
Twin Tube lamp types
EP_
Alternate ballast factors. Eg. EP95,
EP115 for T5 lamp types, EP104 for T8
lamp types
EPSP8
Parallel Wired for T8 lamps
EPSP5
Parallel Wired for T5 lamps
ESD
Standard BF (T5 or T8 bi-pin)
ESD104
EnergyMax 1.04 BF (T8 Bi-pin)
ESD80
Alternate ballast factor for 54T5HO
ED_
Add vendor and ballast series
compatible with control system.
Eg. ED120 LUTEC10
Magnetic Ballast Types
Start Method
Definition
Low Power Factor
Also called normal power factor (NPF).
Labeled for residential use only.
Designation
L
Characteristics
For residential fixtures using 2', 3', or 4'
Bi-pin T12 lamp types.
105
Technical
Columbia Lighting supplies ballasts from a variety of reputable vendors whose products conform to Columbia Lighting’s
standard specifications (pg. 107). See Ballast Specified Vendor Options to order a particular manufacturer’s product or ballast
series. All ballast information is based on manufacturer's published literature and is subject to change without notice.
Ballast Options
Ballast Quantities and Specified Vendors
Ballast Quantities
Technical
Fixtures with 3, 4, 6, and 8 lamps will be supplied with two ballasts standard. Optional ballast quantities are available.
See also Master-Satellite option for ballast quantity options on tandem-wired pairs. In tandem-length fixtures with more than one ballast, lamps
are wired side by side unless left and right (LR option) is specified.
Number of Lamps in Fixture
1 or 2
Standard Designation
Optional Ballast Designation
Provides one ballast
Adding 11, such as 11E or 11EP, provides two (2)
ballasts in 2-lamp fixtures
3
Provides two ballasts, one on inboard lamp, one
on outboard
Adding 3, such as 3E or 3EP, provides one (1)
3-lamp ballast
4
Provides two ballasts, one on inboard lamps,
one on outboard
Adding 4, such as 4E or 4EP, provides one (1)
4-lamp ballast
6
Must specify
Adding 24 (eg.), such as 24E or 24EP, provides a
2-lamp and 4-lamp ballast (recommended).
3E or 3EP provides (2) 3-lamp ballasts
8
4E provides two (2) 4 -lamp ballasts wired on
lamps 1, 4, 5, 8 and 2, 3, 6, 7
Consult factory
Specified Vendors*
Specify ballast type, optional ballast quantity and vendor option. Eg. 3ED120LUTFDB
Vendor
Vendor
Specified Designation
LUT
ULT
GE
SYL
ADV
Vendor and Series
Specified Designation
Vendor’s Series Name
(normal ballast factor unless noted)
LUTEC10
Eco10 Dimming
LUTHIL
Hi-Lume Dimming
LUTES
EcoSystem incl. E1/E2 only (Dimming)
LUTESSW
EcoSystem incl. sensor wires (Dimming)
LUTEHD
EcoSystem H
ULTHE
Ultim8
ULTHP
High Performance
GEMAXH
Ultramax High BF
GEMAXL
Ultramax Low BF
GEMAXN
Ultramax
SYLQHE
High Efficiency
SYLPSX
Extreme
SYLPHO
Helios Dimming
SYLDIM
Powersense Dimming
ADVCEN
Centium
ADVIOP
Optanium
ADVMK10
Mark X Dimming
ADVMK7
Mark VII Dimming
*Others available, call out ballast catalog number in fixture description. Dimming ballasts use ED plus voltage and vendor designation.
106
Ballast Options
Ballast Characteristics and Total System Watts
Ballast Characteristics
General Definitions
Power Factor
Technical
Measure of how effectively ballast converts power source into usable watts. Ideal power factor would measure 1.0.
Crest Factor
Measure specifying the ratio of peak current to R.M.S. current in the waveform used to drive programmed start lamps. High crest factors shorten
lamp life.
Total Harmonic Distortion
Measure of magnitude of input current harmonics compared with amplitude of fundamental frequency current.
Ballast Factor
Lamp manufacturers publish lumen data based upon a “reference ballast” built to meet ANSI standards. Ballast factor is a measure of how well a
ballast performs in comparison to the “reference ballast” as a percentage of rated lumen output.
Columbia Lighting Ballast Specifications
All factory-choice normal ballast factor electronic ballasts meet the following specifications. Optional ballast factors and customer specified vendor
available as options.
Ballast must be high power factor, (min. 95), Class P, UL listed, meet IEEE and ANSI requirements C62 .41 Category A for transient protection and FCC
Regulations, Class A for electromagnetic interference. Operates at voltage variance of +/- 10%, crest factor of <1.7, total harmonic distortion (THC)
<10% for primary lamp type, minimum ballast factor (BF) of .87 (.95 for T5/T5HO lamp types). Ballast must start lamps at 0°F ambient temperature.
All ballasts for F32T8 full and reduced wattage lamps must be NEMA premium qualified.
Total System Watts
The Total System Watts refer to the ballast and lamp watts consumed per luminaire. Input watts are based upon ANSI watts as published by ballast
manufacturer’s literature which is subject to change without notice. Ballast information shown is generic and serves as an approximation only; actual
input watts vary according to specific ballast manufacturer and ballast number. For exact input wattage contact either the ballast manufacturer or
Columbia Lighting Technical Support. Wattage published in Columbia IES photometric tests represents actual measured watts.
Total System Watts (Watts/Volts = Amps)
Ballast Type
Electronic
Programmed
Start
T5
Electronic
Programmed
Start
T8
Catalog
Designation
EP
EP
EP
EP
EP
EP
EP
EP
3EP
4EP
EP80
EP95
EP115
ESD80
ESD95
ESD104
ESD115
EP
EP
EP104
3EP
4EP
Lamp Type
F14/T5
F14/T5
F24/T5HO
F24/T5HO
F28/T5
F28/T5
F54/T5HO
F54/T5HO
F54/T5HO
F54/T5HO
F54/T5HO
F28/T5
F28/T5
F54/T5HO
F28/T5
F32/T8
F28/T5
F32/T8
F32/T8
F32/T8
F32/T8
F32/T8
No. of Input
Lamps Watts*
1
19
2
34
1
28
2
53
1
34
2
66
1
63
2
121
3
182
4
240
2
96
2
60
2
69
2
96/52
2
60/28
2
65/32.5
1, 2
71/34
1
31
2
62
2
65
3
92
4
119
Ballast Type
Electronic
Instant Start
T8
Electronic
T12
Electronic
TT
Catalog
Designation
E
E
3E
4E
E
E
E
E
E104
E104
E105
E
E
EP
EP
ETT
ETT
3ETT
EPTT
EPTT
3EPTT
No. of Input
Lamp Type
Lamps Watts*
F32/T8
1
30
F32/T8
2
56
F32/T8
3
85
F32/T8
4
112
F96/T8
1
70
F96/T8
2
108
F96/HO/T8
1
100
F96/HO/T8
2
185
F32/T8
2
67/66
F32/T8 (28 watt)
2
60/59
F32/T8 (25 watt)
2
51/51
F96/T12/ES
1
64
F96/T12/ES
2
105
F96/T12/HO
1
119
F96/T12/HO
2
208
F40/TT
1
39
F40/TT
2
68
F40/TT
3
99
F40TT
1
38
F40TT
2
76
F40TT
3
110
*Where published input watts differ between 120/277V the higher (120V) wattage is given. For 2 level step dim ballasts (ESD types) both high and
low output wattages are given.
107
Electrical Options
Emergency Battery Packs Installed
Technical
Luminaires with factory installed battery packs will bear the UL Emergency equipment label. Dry location labeling standard. Standard inverter
options below are not suitable for cold temperature starting, damp or wet location labeling. Optional inverters available for these applications.
Consult factory or specify vendor’s catalog number.
EL
EL61
EL71
EL72
350-450 lumens for one 2'-4' lamp (T8, T12, U-Bent, TT)
500-600 lumens for one 2'-4' lamp (T8, T12, U-Bent, TT)
600-700 lumens for one 2'-8' lamp (T8, T12, U-Bent, TT)
600-700 total lumens for two 2'-8' lamps (T8, T12, U-Bent)
EL141
EL142
EL5*
EL5H*
1100-1400 lumens for one 2'-8' lamp (T8, T12, U-Bent, TT)
1100-1400 total lumens for two 2'-4' lamps
390-700 lumens for one 2'-4' T5/T5HO
725-1250 lumens for one 2'-4' T5/T5HO
*These inverters not available in some 2' fixtures due to space constraints. Remote mounting using accessory enclosure (by others) recommended.
Fusing
Fusing is available on all fixtures to prevent over current from being transmitted upstream through the fixture as may be possible due to a dead
short fault in a ballast. Specify GLR (fast blow) or GMF (slow blow) fusing options. Fuses are not UL listed to break under load and therefore are
not a substitute for the in-fixture ballast disconnects supplied standard where required by the National Electric Code.
Fixture Flex and Leads
Fixture flex (also called pre-wire or whip) is a UL listed lighting component for recessed fixtures to provide the electrical wiring between the
junction box and recessed fixture. Flex may be no longer than 6'. Typical cables use ⅜" flexible conduit and three or four 18 gauge leads. Flex
cables are shipped pre-wired to the recessed fixture. Add option designation to catalog number after ballast options. Eg. C388
Cable
No. of Wires
C Cable
Cable Diameter
3 3
4 4
5 5
8 ⅜"
2 ½"
Wire gauge
8 18 gauge
4 14 gauge
2 12 gauge
Miscellaneous Fixtures and Electrical Options (add As Suffix on end of Catalog string)
Fixture/Option
Cat. No.
PSW
PSWD
4PSW
Description
Pull switch, one circuit, 120V only
Pull switch, wired to the downlight circuit on a two circuit unit, 120V only
Four-way pull switch for two circuit, two lamp unit, 120V only
For Use With
Selected strips, surface units
and industrials. Contact factory
for applications
NL
Medium base lampholder for 15W, 25W, 40W, or 60W T10 lamp. Lamp not
included. 120V only
AWN, SM units
Fluorescent Night Light for 7W, T-4, G23 lamp
Fluorescent Night Light for 9W, T-4, G23 lamp
Fluorescent Night Light for 13W, T-4, GX23 lamp
Lamp not included. PL ballast will default to fixture voltage unless specified
Grounded convenience outlet (120V only)
4PS, SM, and WAL series
PL7
PL9
PL13
GCO
C6P15_ 6' Cord and Straight Blade, NEMA 5-15P, 15A (Add Voltage: 1 = 120)
C6TL15_ 6' Cord and Twist-Lock Plug, NEMA L5-15P (120V) NEMA L7-15P (277V), 15A
(Add Voltage: 1 = 120, 2 =277)
C6TL20_ 6' Cord and Twist-Lock Plug, NEMA L5-20P (120V) NEMA L7-20P (277V), 20A
(Add Voltage: 1 = 120, 2 =277)
F3C_
3-Conductor feed cord, 18ga stranded wire
(Add length needed: 5 = 5', 10 = 10', or 15 = 15')
F4C_
4-Conductor feed cord, 18ga stranded wire
(Add length needed: 5 = 5', 10 = 10', or 15 = 15')
GLR
Fast blow fuse, fuse amps based on fixture ordered
108
WPM, WM, WAL, UCS and UC
Standard on SA, W
All industrial fixtures
All industrial fixtures
All fixtures
Wiring Options
Master/Satellite Wiring Harness
Detail for 2' × 4' 3-Lamp Luminaires
Adapter plate K. O. for line feed.
Technical
Flexible cable harness
with code gauge wires
ships with master
Polarized plug-in connector and
pre-assembled adapter plate
Master Unit
Satellite Unit
Ballast
Master
Satellite
E, EP
(2) 2-Lamp
(1) 2-Lamp
24E, 24EP
(1) 2-Lamp + (1) 4-Lamp
None
All wired for inboard-outboard
• Master/satellite units bear appropriate UL labels.
• Single units must be ordered to fill odd number layouts.
• Harness may be ordered with any Columbia Lighting 3-Lamp recessed luminaires.
• In master/satellite pairs requiring emergency inverters, UL requires that the inverter be located in the master and power lamps in the master.
• Many programmed start ballasts including all dimming and step dimming ballasts are not suitable for master/satellite applications due to lamp
lead length restrictions. See ballast vendor technical data for more information.
• Available on most recessed fixtures. Not available on M46, WT, or AC series.
Layout Options
8'
F
Satellite Unit
J
H
G
E
Fixture Position
B
C
12'
10'
8'
K
4'
D
Position
Minimum Length Harness
Required
A
6'
B
7'
C
8'
D
9'
E
8'
F
10'
G
7'
H
7'
J
8'
K
9'
L
9'
Harness length must be specified on order.
L
Master Unit
Line Feed
Adapter Plate
K.O.
Caution: Some electronic ballasts can only be wired with
harnesses less than 11' or are not suitable for remote mounting.
Consult with ballast manufacturer before specifying.
109
Wiring Options
Branch Circuits
Plug-On Branch Circuit Wiring
Technical
Plug-On Branch Circuit Wiring System features complete branch circuit wiring. You supply the feeder; Plug-On does the rest. The system will
handle all popular voltage/phase combinations – 2 or 3 wire, 120V, 277V, or 240V, and 3-phase, 4 wire 120/208V or 277/480V-20 amp rating. It
is UL listed and combines the following features:
• Available on all continuous row surface mounted fixtures for up to 20 amp circuit runs. Supplied as single or multiple circuit with these
fixtures: Surface (PT, AW), Strips (CS, CN, K, LB, KT, SS), Industrials (KL, CSR).
• Available for easy wiring connections for single circuit (BC1), multiple circuits (BC2A, BC2B) or alternating AB or ABC patterns (BC2X, BC3X)
for up to 4 circuits in a row.
• May be used with any conventional hanging method – chain, Zip-Tee, slide clamp, stem, or stud.
• Add "G" to option to add a ground wire in harness
• Complete, ready for connection as shipped – no separate parts to misplace. Connectors snap-lock for positive mechanical connection and are
color coded for instant identification.
• Carton and channel marked for ballast circuit identity – aids installation, distribution, and maintenance.
• Free factory consulting on coordination of order is recommended to assure proper application.
Mount fixture in any economical, familiar
manner.
Make electrical connection at same time as
mounting next fixture. No need to come back.
Power must be off when making connection.
Catalog Number
-Suffix
Add lamps and move on to next fixture.
Description
1 Circuit: 120V-277V (2 Wire)
-BC1
Ballasts connected to black/white wires
2 Circuit: 120V/240V or 120-277V (3 Wire)
-BC2A
Ballasts connected to black/white wires
-BC2B
Ballasts connected to red/white wires
-BC2AB
Black and red wires. Ballast on each plus white. Add L/R
option for left/right (in-line) switching
2 Circuit Alternating (3-wire with crossover for A-B-A-B circuit
pattern)
-BC2X
Black and red wires. Ballast connected to first position
plus white wires
3-Circuit Alternating (4-wire with crossover for A-B-C-A-B-C
circuit pattern)
-BC3X
Black, red, and blue wires. Ballast connected to first
position plus white wires
3 Circuit: 3 Phase 120V/208V or 277V/480V (4 Wire)
-BC3A
Ballasts connected to black/white wires
-BC3B
Ballasts connected to red/white wires
-BC3C
Ballasts connected to blue/white wires
-BC4A
Ballasts connected to black/white wires
-BC4B
Ballasts connected to red/white wires
-BC4C
Ballasts connected to blue/white wires
-BC4D
Ballasts connected to yellow/white wires
2 Circuit with 2 ballasts in fixture (3 Wire)
4 Circuit (5 Wire)
Standard wiring in fixtures with multiple ballasts
In board, out board wiring is standard in fixtures or master/satellite pairs with two or more ballasts and three or more lamps in cross section
(except in high bay products).
In tandem-length fixtures lamps side by side will be on the same ballast. Specify L/R option for left/right switching and for most even light
distribution when switching fixtures in continuous rows.
110
Lamp and Packaging Options
Lamp Options
Technical
Many fixtures can be ordered with lamps pre-installed. Some fixture designs are not available pre-lamped because there is no installation or
shipping advantage. Lamp options listed below provide the factory’s choice of reputable vendors. Insert lamp option after ballast voltage
designation in fixture catalog number. NFO and reduced wattage designations provide lamps meeting applicable NEMA Premium and CEE listing
criteria.
Color Rendering Index (CRI) refers to how accurately the lamps phosphor blend reproduces colors compared with a natural source (sunlight).
Color temperature refers to how warm (3000°K) or cool (4100°K) the light appears. Candlelight represents an extreme warm (reddish)
temperature while sunlight represents an extreme cool (blue-white) temperature.
Please specify vendor’s catalog number if a specific vendor, series or lamp feature is required. Reduced wattage lamps may not be suitable for
dimming or cold temperature applications. Consult vendor’s specification.
Lamp Profile
(f = Fluorescent)
FO
FO30
FO28
FO25
NFO
F5
FTT
T8 (full wattage)
4' T8 reduced wattage (30W)1
4' T8 reduced wattage (28W)1 (PLUS)
4' T8 reduced wattage (25W)1
4' T8, NEMA Premium Full wattage (32W)
T5 or T5HO
Twin Tube
Color Rendering
Index
Color
Temperature
7 Minimum 75
8 Minimum 82 (T8) or
85 (T5) (Required for
NEMA Premium/CEE)
30 3000°K
35 3500°K
41 4100°K
Lamp Shape
Blank Straight or Twin Tube
U6 U-Lamp 6" Leg Spacing
U1 U-Lamp 1⅝" Leg Spacing
Packaging Options
Products are shipped in individual cartons standard. In fixtures ordered in pallet quantities or greater specify choice of job packaging to ease
fixture handling and reduce job site waste disposal. Option available on lensed and parabolic troffers.
JP
Job pack. Fixtures less cartons, with protective outer packaging and stretch-wrapped to standard 4-way pallet.
PN
Job pack narrow, less cartons, with protected outer packaging and stretch-wrapped to 4-way pallet no greater than 24" inches wide.
PWCS Cartoned, stretch-wrapped to standard pallet.
PNCS Cartoned, stretch-wrapped to narrow pallet.
PW
Less cartons, stretch-wrapped to wide pallet.
1
Not recommended for use with step or full dimming.
111
Technical
Troubleshooting
Flickering Lamps
Fixtures Do Not Light
1.New lamps need to be seasoned.
In the case of dimming ballasts, most manufacturers recommend
100 burning hours before dimming.
1.Is the power on?
2.Line voltage varies.
Check to see that line voltage current is constant.
3.Air movement across lamp.
Check to make sure that HVAC is not directed across lamps,
lowering temperature of lamps.
Cycling of Ballast
1.Line voltage varies.
Check line voltage to make sure constant power is supplied.
2.Replace lamps to verify ballast problem.
3.Insulation covering fixtures.
Check to make sure that fixtures are not covered. Excess heat will
cause thermal protector to cycle.
4.Fixtures are mounted on ceiling directly.
Verify that fixtures are designed to be mounted directly to ceiling.
If not, an air space must be provided between ceiling and fixtures.
2.Lamp compatibility.
Cross check lamps against ballast designation listed on ballast
case. Some energy saving lamps and ballasts are not compatible.
3.Incorrect or loose wiring.
Disconnect power and check all wiring connections.
4.Check fuses if supplied.
Disconnect power before removing. Check with ohmmeter or test
equipment. Reinstall and energize.
5.Line voltage low.
Voltage range for 120 volts is 112 minimum and 125 maximum.
Voltage range for 277 volts is 255 minimum and 289 maximum.
6.Low ambient temperature.
Fluorescent lamps are hard to start at temperatures below 50°F.
7.Are lamps properly engaged in the lampholders?
Check to make sure that pins are properly engaged.
Noise
Slow Starting
1.Are all components secure?
Check ballast mounting and look for loose fixture components.
1.Programmed Start ballast versus Instant Start ballast.
Programmed Start ballasts pre-heat the cathode and then ignite
lamps. Instant Start ballasts use a high voltage surge to start
lamps instantly. Programmed Start ballasts are slower starting but
easier on lamps due to pre-heating of cathodes.
2.Is there furniture in the space?
Empty rooms magnify sound, emphasizing the normal operating
hum. The sound which seemed so loud in an empty space will
normally disappear once the room has been filled with furniture,
partitions, and equipment.
2.Line voltage too low.
Check line for correct voltage as required by ballast.
(See “Fixtures Do Not Light”)
3.Is the ballast functioning correctly?
Replace ballast if necessary.
3.Incorrect lamp.
Make sure lamps are compatible with ballast.
4.What is the sound rating of the ballast?
Verify the ballast’s proper sound rating for the environment. If the
sound rating is inappropriate, remote mount the ballast or replace
it with a ballast with the appropriate sound rating.
4.Low ambient temperatures.
Is temperature above 50°? Some ballasts require higher starting
temperatures to start properly.
112
RKT
Retrofit Kit Lens Troffer
Features
Internal retrofit package to convert outdated
fixtures to high efficiency lighting using
the latest linear fluorescent lighting
technologies
•
Retains existing housing and shielding
•
Kits are available to retrofit 2' × 2' or 2' × 4'
fixtures with T8 lamps
•
Installs with simple hand tools
•
Standard kits include: reflector, prewired
ballast and sockets, socket brackets, and
optional bulk lamps
•
Optional reflector materials available: 91%
reflective gloss white or 95% reflective
specular
•
Reflector extends the width and length of the
fixture interior to maximize light output
•
Energy savings up to 46% compared to
3-lamp or 4-lamp T12 magnetic systems,
while maintaining existing light levels
F I X T U R E R E N OVAT I O N
•
Ordering Information
RKT
–
Model
RKT Retrofit Kit
Lens Troffer
–
No. of Lamps in
Cross Section
2 Two
3 Three
SIZE
22 2' × 2'
24 2' × 4'
U
–
Reflector Type
GW Gloss White, 91% Reflective
M4R Enhanced Specular Aluminum,
95% Reflective
Lamp Type
17 2', T8: 17 Watt
32 4', T8: 32, 30, 28 or 25 Watt
Accessories (order separately)
RKF32T8830 T8 32 Watt Lamps, FO830, 85CRI, 3000K,
order in case quantity only (25)
RKF32T8835 T8 32 Watt Lamps, FO835, 85CRI, 3500K,
order in case quantity only (25)
RKF32T8841 T8 32 Watt Lamps, FO841, 85CRI, 4100K,
order in case quantity only (25)
RKF54T5835 T5HO 54 Watt Lamps, F5835, 85CRI, 3500K,
Voltage
U 120V-277V
–
Options
GTS Hi-Lo Control, Single Circuit Toggle
Switch (used for Step Dimming
Ballast)
(Required when no ballast is supplied)
IS8 Instant Start T8 Sockets
PS8 Programmed Start T8 Sockets
Ballast
NOTE: See Technical Section for other ballast options.
ELW Electronic T8, Instant Start, 0.77 Ballast Factor
E Electronic T8, Instant Start, 0.88 Ballast Factor
E104 Electronic T8, Instant Start, 1.04 Ballast Factor
EHL Electronic T8, Instant Start, 1.18 Ballast Factor
ESD Electronic T8, Step Dimming, Programmed Start, 0.88
Ballast Factor
EP Electronic T8, Programmed Start, 0.88 Ballast Factor
3ELW 3-Lamp Electronic T8, Instant Start, 0.77 Ballast Factor
3E 3-Lamp Electronic T8, Instant Start, 0.88 Ballast
3EHL 3-Lamp Electronic T8, Instant Start, 1.04 Ballast Factor
3EP 3-Lamp Electronic T8, Programmed Start, 0.88 Ballast
Factor
Blank No Ballast supplied (Please specify socket type under
options)
order in case quantity only (40)
RKF54T5841 T5HO 54 Watt Lamps, F5841, 85CRI, 4100K,
order in case quantity only (40)
Product Availability
SIZE
NO. OF LAMPS IN
CROSS SECTION
NO. OF
LAMPS IN
FIXTURE
LAMP
TYPE
2' × 2'
2, 3
2, 3
17
2' × 4'
2, 3
2, 3
32
2.26"
9.00"
18.08"
2-Lamp Cross Section
113
RKS/RKSR
Retrofit Kit Strip and Industrial Reflector
FFi x
I XtTuUre
R E RREEnovat
N OVATi on
ION
Features
•
Retrofit package to upgrade existing 4' or 8'
striplights to energy-efficient fixtures using
the latest T8 or T5HO technology
•
Kit maximizes fixture efficiency and provides
uniform light distribution
•
Kits are shipped completely pre-wired and
install with simple hand tools
•
Standard kits include: channel cover or
reflector, pre-wired ballast and sockets,
safety cables, and optional bulk lamps
•
Designed to fit most existing channel widths
from 4" to 53/8"
•
Kit attaches to existing socket brackets to
reduce waste
•
Includes dual safety cables for one person
installation and secure attachment to
existing channel
•
Energy savings up to 35% compared to
2-lamp T12HO magnetic systems, while
maintaining existing light levels.
Ordering Information
–
–
Model
RKS Retrofit Kit
Strip Type
Fixtures
RKSR Retrofit Kit
Industrial
Reflector
Type
SIZE
4 4'
8 8'
No. of Lamps in
Cross Section
1 One
2 Two
See Product
Availability table
below.
–
Reflector Type
(RKSR ONLY)
GW Gloss White, 91%
–
U
Voltage
U 120V- 277V
Reflective
M4R Enhanced Specular
Aluminum, 95%
Reflective
Lamp Type
32 4', T8: 32, 30,
Options
(Required when no ballast is supplied.)
IS8 Instant Start T8 Sockets
PS8 Programmed Start T8 Sockets
PS5 Programmed Start T5 Sockets
Ballast
NOTE: See Technical Section for other ballast options.
ELW 1 or 2-Lamp, Electronic T8, Instant Start, 0.77 Ballast Factor
E 1 or 2-Lamp, Electronic T8, Instant Start, 0.88 Ballast Factor
EHL 1 or 2-Lamp, Electronic T8, Instant Start, 1.18 Ballast Factor
ESD 1 or 2-Lamp, Electronic T8, Step Dimming, Programmed Start,
0.88 Ballast Factor
EP 1 or 2-Lamp, Electronic T8, Programmed Start, 0.88 Ballast
Factor or Electronic T5HO, 1.0 Ballast Factor
4ELW 4-Lamp, Electronic T8, Instant Start, 0.77 Ballast Factor
4E 4-Lamp, Electronic T8, Instant Start, 0.88 Ballast Factor
4EHL 4-Lamp, Electronic T8, Instant Start, 1.18 Ballast Factor
4EP 4-Lamp, Electronic T8, Programmed Start, 0.88 Ballast Factor
or Electronic T5HO, 1.0 Ballast Factor
Blank No Ballast Supplied (Please specify socket type under
options)
28 or 25 Watt
54 4', T5HO: 54 or
51 Watt
Accessories (order separately)
RKF32T8830 T8 32 Watt Lamps, FO830, 85CRI, 3000K,
order in case quantity only (25)
RKF32T8835 T8 32 Watt Lamps, FO835, 85CRI, 3500K,
order in case quantity only (25)
RKF32T8841 T8 32 Watt Lamps, FO841, 85CRI, 4100K,
order in case quantity only (25)
RKF54T5835 T5HO 54 Watt Lamps, F5835, 85CRI, 3500K,
order in case quantity only (40)
RKF54T5841 T5HO 54 Watt Lamps, F5841, 85CRI, 4100K,
order in case quantity only (40)
Product Availability
NO. OF LAMPS IN
CROSS SECTION
NO. OF
LAMPS IN
FIXTURE
LAMP
TYPE
4'
1
2
1
2
32, 54
32, 54
8'
1
2
2
4
32, 54
32, 54
SIZE
RKS
2-Lamp
RKSR
2-Lamp
114
RKS
1-Lamp
RKSR
1-Lamp
LHV - Fluorescent High Bay, Hubbell Power Systems, Aiken, SC
ZPT - Zero Plenum Troffer High Efficiency Architectural Luminaire, Mt. Sinai Hospital, New York, NY