JP256BM/WM ADU
GE® 21" Electric Radiant Cooktop
Dimensions and Specifications (in inches)
KW Rating
240V
3.7
208V
3.2
3-1/4
Cooktop
Note: Built-In Electric Cooktops require 1-1/2" free
area between the bottom of the cooktop and any
combustible material, i.e., shelving. Requires an
18" minimum from cooktop to adjacent overhead
cabinets. Units are furnished with a 48” flexible
armored cable.
Installation Information: Before installing, consult
installation instructions [Pub. No. 31-0978] packed
with product for current dimensional data.
17-1/8
21-1/2
16-1/8
20-1/8
13" MAX.
depth
30" MIN. to
unprotected
cabinet
2" to
rear wall
15" MIN.
to cabinet
1-3/4 " MIN.
clearance to
side wall
from cut-out
2-3/4
Required
1-3/4 " MIN.
clearance to
side wall
from cut-out
Electrical junction box 5" MIN.
below countertop
Cut should
not interfere
with cabinet
structure
at front
jp256_install.eps
For answers to your Monogram,® GE Profile™ or
GE® appliance questions, visit our website at
ge.com or call GE Answer Center® service,
800.626.2000.
Specification Created 6/10
321355
JP256BM/WM ADU
GE® 21" Electric Radiant Cooktop
• Compact Cooktop - Smaller cooktop is ideal for 21" cooktop installations
• Ceramic Glass Cooktop - A smooth cooktop surface makes cleaning
quick and easy
• Ribbon Heating Elements - Provide powerful heat beneath a smooth
glass surface to ensure even heat and fast warm-up times
• 6"/9" Dual Heating Element
• Simmer Option - Delivers the ideal 140 degree temperature for the
gentle simmering of foods like soups or sauces
• Frameless Design - A smooth and seamless cooktop surface makes
cleaning quick and easy
• Upfront Controls - Controls are placed within easy reach at the front
center of the cooktop
• Hot Surface Indicator Lights - Illuminate when the cooking surface is
active and hot, adding convenience and safe caution
• Heating Element "On" Light - Illuminates when the cooking surface
is activated
• Model JP256BMBB – Black
• Model JP256WMWW – White
face
Hi
Hi
Hot Sur
6
2
2
Hi
6
1
7
2
Lo
6
3
4
4
r
me
8
6
8
Sim
Features and Benefits
4
5
on
Lo
JP256BMBB
Specification Created 6/10
321355
PDW1860N ADU
GE Profile™ Series SpaceMaker® 18" Dishwasher
Dimensions and Installation Information (in inches)
Electrical Rating
Voltage AC..........................................................120
Hertz....................................................................... 60
Total connected load amperage...............9.0
Calrod® heater watts max......................... 550
For use on adequately wired 120-volt,
15-amp circuit having 2-wire service
with a separate ground wire. This appliance
must be grounded for safe operation.
Note: Dishwasher must not be installed
more than 10 feet from sink for proper
drainage. All plumbing and electrical work
must be in accordance with local codes.
Installation Information: Before installing,
consult installation instructions packed with
product for ­current dimensional data.
For answers to your Monogram, Cafe Series,
Profile™ Series or GE® appliance questions, visit
our website at geappliances.com or call GE
Answer Center® service, 800.626.2000.
®
™
90°
90°
Dishwasher
Countertop
34-1/4" Min.
24"
Electrical, drain and
water supply line
entrances must
be confined to
shaded areas to
avoid interference
with components
Dishwasher
Door
3"
From back of
rear frame
to wall
Bottom
of tub 7"
to floor
2" Minimum
Electrical
Wiring
18*
32-1/2
to
35**
22-1/2
Max.
1-1/2"
25
White (neutral)
Hot Water
Ground
Line
Black (line)
17-5/8" to 18" Min.
1-1/2"
*Width adjustable from 17-5/8" to 18".
**Meets ADA countertop height requirement of 34".
Listed by
Underwriters
Laboratories
Specification Revised 5/14
250218
PDW1860N ADU
Profile™ Series SpaceMaker® 18" Dishwasher
Features and Benefits
•Bright annealed stainless steel interior - A lustrous finish and lasting beauty that resists
stains and corrosion
•Hidden electronic controls - Tucks easy-to-use controls out of sight inside the door's
top edge
•Glasses cycle - Gently washes glassware; great for entertaining
SPEED SOAK
SES RINSE
GLAS
AL LIGHT
HEAVY NORM
ON
TIME
DELAY
1 - 24 HR.
CYCLE
SELECT
RINSE AID
OFF
•Air-dry cycle - Washes lightly soiled dishes without a heated dry
•ADA-compliant - Dishwasher design allows for simple operation and easy access
•1-24-hour Delay Start - Offers the ability to start the dishwasher when no one's home
• Model PDW1860NSS -Stainless steel
PDW1800NSS
Specification Revised 5/14
250218
JV348L ADU
Model JV347
GE 30" Deluxe Range Hood
®
Dimensions and Installation Information (in inches)
120V
Optional power
supply connection
1-1/4
Amp Rating
3-1/4
2.5
WB02X9381 replacement grease filter and WB02X10700
replacement charcoal filter are available for additional
cost. Call toll-free 800.626.2002.
1-1/4
3-1/4
5-1/2
1-1/4
Center
line of hood 1-3/8" Typ.
8-1/4" Typ.
8-1/4" Typ.
7-3/4
7-3/4
line of hood 1-3/8" Typ.
Exhaust outlet connects to 3-1/4" Center
line of ho
x 10" rectangular duct. Vent top or
rear. Includes rectangular damper.
1-1/8" Typ.
5-3/4
1-1/4
1/2
17-1/2
7-3/4
Optional power
supply connection
1-1/4
1-1/8" Typ.
29-7/8Center
Refer to this drawing for
rectangular exhaust option.
7-3/4
Optional power
supply connection
10
1-1/4
1/2
Installation
Model
JV347Information: Before installing, consult
installation instructions,packed with product, for ­current
dimensional data.Light bulb(s) not included.
12
1-1/8" Typ.
8-1/4" Typ.
JXHC1 Cord Kit: Allows a receptacle in the cabinet over
the range to accommodate either an over-the-range
microwave oven or a standard hood.
1-1/4
10
1-1/4
Center
line of hood 1-3/8" Typ.
Refer to this drawing for round
exhaust option.
Exhaust outlet connects to 7"
diameter duct. Vent top only.
Round damper accessory. JXDA22,
available at additional cost.
For answers to your Monogram,® GE Profile™ or
GE® appliance questions, visit our website at
ge.com or call GE Answer Center® service,
800.626.2000.
1-3/8" Typ.
1-1/8" Typ.
Listed by
Underwriters
Laboratories
8-5/16" Typ.
3-1/4
1/2
Optional top power
supply connection
10
1-1/4
Specification Created 6/06
321451
JV348L
GE® 30" Deluxe Range Hood
Features and Benefits
• Convertible Venting – Hood configuration can be changed to fit
the needs of various installation requirements
• Vertical and Rear Exhaust – Provides the option of connecting duct
work to either the rear or the top of the hood
• Variable 3 Speed Fan Control – Powerful variable speed exhaust
system that effectively pulls smoke and vapors out of the kitchen
• Cooktop Light – Provides light to illuminate cooking surface
below hood
OFF
LO
MED
HI
OFF
ON
• Removable Grease Filter – Durable filters can be removed for easy
cleaning and maintenance
• Round and Rectangular Ducting – Hood is designed to fit either
standard round or rectangular duct work
• Damper Included
JV347LSS
• Model JV348LSS – Stainless steel
For answers to your Monogram,® GE Profile™ or
GE® appliance questions, visit our website at
ge.com or call GE Answer Center® service,
800.626.2000.
Specification Created 6/06
321451
GML03GAE ADU
GE® Double-Door Compact Refrigerator
Front View
Top View
Air
Clearances
Overall
Dimensions
Dimensions and Installation Information
Height (in.) A
33
Width (in.) B
18-3/4
Depth with handle (in.) C
19-3/8
Depth with door open 90˚ (in.) D
37
Each side (in.)
1/2
Top (in.)
2
Back (in.)
2
B
A
C
Front View
D
For answers to your Monogram,® GE Profile™ or
GE® appliance questions, visit our website at
geappliances.com or call GE Answer Center® service,
800.626.2000.
Air
Clearances
Overall
Dimensions
Top View
Height (in.) A
Dimension and installation information
are shown in inches.
33
Width (in.) B
18-3/4
Depth with handle (in.) C
19-3/8
Depth with door open 90˚ (in.) D
37
Each side (in.)
1/2
Top (in.)
2
Back (in.)
2
Specification Revised 12/13
310935
GML03GAE ADU
GE® Double-Door Compact Refrigerator
Features and Benefits
•3.1 cu. ft. capacity
•CleanSteel™ exterior - The look of stainless steel without smudges and smears
•Separate true-freezer compartment - 0.9 cu. ft. freezer capacity gives you room to store
frozen foods
•Interior lighting - Automatically illuminates when the fresh-food door is open
•Clear crisper - Provide the ideal storage environment for fruits and vegetables
•Glass shelves - Creates convenient food storage with easy-to-clean shelves
•Door shelves - Small containers and boxes are easy to find in separate door areas
•Can rack - Soft drink cans are within easy reach for quick access
•Tall bottle door storage - Tall bottle storage frees up valuable shelf space
•Manual defrost - Manually defrost the freezer on your schedule
•Recessed handles - Recessed handles make opening and closing the doors simple
• Model GML03GAEBS - CleanSteel™
GML03GAEBS
Specification Revised 12/13
310935
GTUP240EM/240GM ADU
GE® 24" Unitized Spacemaker® 2.2 DOE Cu. Ft. Washer and 4.4 Cu. Ft. Dryer
Dimensions and Installation Information (in inches)
Installation Instructions
Electrical Requirements:
GTUP240EM Electric Dryer – This appliance should be
connected to an individual, properly-grounded branch
circuit with 120/240V single-phase 60 Hz electrical
service and should be protected by 30-amp time-delay
fuses or circuit breakers. This appliance is manufactured
with neutral connected to the frame. Power cord should
be purchased separately.
24" NOMINAL PRODUCT DIMENSIONS
*23-3/4"
43"
17-7/8"
Note:
These appliances are not approved for 120-volt operation.
Gas Requirements:
GTUP240GM Gas Dryer – This appliance should be
connected to an individual branch circuit with a threeprong grounding-type receptacle and 120-volt singlephase 60 Hz electrical service and should be protected
by 15- or 20-amp time-delay fuses or circuit breakers.
This appliance is equipped with a 6-foot long flexible
U.L. listed 20-amp power cord to match a 15-amp
receptacle.
Gas Rated input 10,500 BTU/HR. Factory equipped for
natural gas. Tested for LP gas.
Dryers must be exhausted to the outside.
Installation Information:
For complete information, see installation instructions
packed with the product.
Gas Inlet
2-3/4"
Water Inlets
74-1/2"
Vent
8-1/4"
2"
51°
51"
Drain outlet
33-1/4"
32-7/8"
4-1/4"
27-3/8"
23-3/4"
19-1/8"
* Dimension represents door closed including handle and knobs.
NOTE: With feet set at mid position, feet can be adjusted ±.375".
For answers to your Monogram,® Cafe™ Series,
Profile™ Series or GE® appliance questions, visit
our website at geappliances.com or call GE
Answer Center® service, 800.626.2000.
Listed by
Underwriters
Laboratories
Specification Revised 10/13
360329
4" DIA.
4" DIA.
4"
2-1/2"
Rigid
Rigid
No. of 90º
ADUMetal
GTUP240EM/240GM
Metal
Elbows
®
56 Feet
42 Feet
GE®01 24" Unitized
Spacemaker
2.2 DOE Cu. Ft. Washer and 4.4 Cu. Ft. Dryer
44 Feet
32 Feet
2
34 Feet
25 Feet
Dimensions
and Installation
Information (in inches)
3
24 Feet
18 Feet
GTUP240EM/GM DRYER EXHAUST LENGTH*
RECOMMENDED MAXIMUM LENGTH
Exhaust Hood Types
Use only for short
Recommended
run installations
4" DIA.
4" DIA.
4" DIA.
4"
No. of 90º
Elbows
0
1
2
2-1/2"
Rigid
Metal
43 Feet
33 Feet
24 Feet
6
For answers to your Monogram,® GE Profile™ or
GE® appliance questions, visit our website at
geappliances.com or call GE Answer Center®
service, 800.626.2000.
Rigid
Metal
36 Feet
26 Feet
16 Feet
For complete information, see installation instructions packed with your dryer.
Ducting Materials:
This dryer MUST be vented with 4" diameter all rigid metal exhaust duct.
Exhaust Length Calculation:
1.Determine the number of 90° turns needed for your installation. If you exhaust to the side or bottom of dryer,
add one turn.
2.The maximum length of 4" rigid (aluminum or galvanized) duct which can be tolerated is shown in the table.
For every extra 90° elbow, reduce the allowable vent system length by 10 ft.
Two 45° elbows will be treated like one 90° elbow.
For the side exhaust installations, add one 90° elbow to the chart.
The total vent system length includes all the straight portions and elbows of the system (transition duct
included).
Dryers must be exhausted to the outside.
Caution: For personal safety do not terminate exhaust into a chimney, under any enclosed house floor (crawl
space), or into an attic, since the accumulated lint could create a fire hazard or moisture could cause damage.
Never terminate the exhaust into a common duct or plenum with a kitchen exhaust, since the combination of lint
and grease could create a fire hazard.
Exhaust ducts should be terminated in a dampered wall cap to prevent back drafts, bird nesting, etc. The wall cap
must also be located at least 12" above the ground or any other obstruction with the opening pointed down.
Special Installation Requirements
Alcove or Closet Installation:
• If your dryer is approved for installation in an alcove or closet, it will be stated on a label on the dryer back.
• The dryer MUST be exhausted to the outside.
• Minimum clearances between dryer cabinet and adjacent walls or other surfaces are:
0" both sides and rear
1" front and top
• Minimum vertical space from floor to overhead cabinets, ceilings, etc. is 75-1/2".
• Closet doors must be louvered or otherwise ventilated and must contain a minimum of 60 sq. in. of open area
equally distributed. If this closet contains both a washer and a dryer, doors must contain a minimum of 120 sq. in.
of open area equally distributed.
• No other fuel-burning appliance shall be installed in the same closet with a gas dryer.
Bathroom or Bedroom Installation:
• The dryer MUST be exhausted to the outdoors.
• The installation must conform with the local codes, or in the absence of local codes, with the National Electric
Code and National Fuel Gas Code, ANSI Z223 for gas dryers.
Minimum Clearances other than Alcove or Closet Installation:
• Minimum clearances to combustible surfaces
0" both sides and rear
1" front and top
Listed by
Underwriters
Laboratories
Specification Revised 10/13
360329
GTUP240EM/240GM ADU
GE® 24" Unitized Spacemaker® 2.2 DOE Cu. Ft. Washer and 4.4 Cu. Ft. Dryer
Features and Benefits
• 2 wash/spin speed combinations - Speeds are matched to fabric type
for great clothes care
• 9 wash cycles - Cycles are designed to specifically handle various
fabrics and soils
• 5 wash/rinse temperatures - Select the right temperature for ideal
wash results
• Auto-load sensing with 5 water levels - Washer will automatically
measure the load size and add just the right amount of water
• Bleach and fabric softener dispensers - Solutions are automatically
mixed with wash water for clean, bright, soft-to-the-touch results
• Rotary-electronic controls (washer) - Simplify cycle selection
• Cycle status lights - Provide accurate cycle times
• Rotary-electromechanical controls (dryer) - Allow fast, easy cycle
selection
• Model GTUP240EMWW – White on white (Electric)
Modified Energy Factor (MEF)
1.31
• Model GTUP240GMWW – White on white (Gas)
Water Factor (WF)
9.10
GTUP240EM
Specification Revised 10/13
360329
SPECIFICATION SHEET
MODEL 744FL
RECESSED
FAN / FLUORESCENT LIGHT
Add lighting and ventilation to your room - with the
look of an ordinary recessed light.
FEATURES
TRIM RING BAFFLE:
• Polymeric construction with matte white finish
• Recessed styling, mounts flush with finished ceiling
LAMP:
• Uses R30-shaped, 2700K, 16W, high efficacy, compact
fluorescent lamp with GU24 base (included)
BLOWER:
• Plug-in, permanently lubricated, motor
• Dynamically balanced centrifugal blower wheel for
quiet, efficient performance
• Low RPM for quiet operation
TYPICAL SPECIFICATION
Fan / Light shall be Broan Model 744FL.
Fan / Light shall have corrosion resistant steel housing and
adjustable mounting brackets.
Motor assembly to be removable and permanently lubricated.
Non-metallic damper/duct connector to be included.
Fan and Light to operate separately or in combination.
Fan / Light must use an R30-shaped, 2700K, 16W, high
efficacy, GU24-based, compact fluorescent lamp.
Air delivery shall be no less than 70 CFM and sound level
no greater than 1.5 Sones. All air and sound ratings shall be
certified by HVI.
Fan / Light must be U.L. and cU.L. Listed for use in insulated
ceilings (Type I.C.).
HOUSING:
• Fits in 2" x 8" construction
• Rugged, 26 gage, galvanized steel construction
• 4" round, polymeric duct connector with 2" tapered
sleeve and no metallic clatter
• Adjustable mounting brackets span up to 24"
CONTROLS: (purchase separately)
• Model 59V (Ivory) / 59W (White) - 60-minute time
control
• Model 69VL (Ivory) / 69WL (White) - One rocker switch
with "on" indicator light
• Model 68V (Ivory) / 68W (White) - Two rocker switches
U.L. Listed for use in insulated ceilings (TYPE I.C.)
U.L. Listed for use over bathtubs and showers when
connected to a GFCI protected branch circuit.
SPECIFICATIONS
HVI-2100 CERTIFIED RATINGS comply with new testing
technologies and procedures prescribed by the Home
Ventilating Institute, for off-the-shelf products, as they are
available to consumers. Product performance is rated at 0.1 in.
static pressure, based on tests conducted in a state-of-the-art
test laboratory. Sones are a measure of humanly-perceived
loudness, based on laboratory measurements.
MODEL VOLTS AMPS* STATIC PRESSURE CFM SONES FAN WATTS DUCT
744FL
120
0.7
0.10
70 1.5
34.4
4" Round
0.25
55
* Total Connected Load
Broan-NuTone LLC, 926 West State Street, Hartford, WI 53027 (1-800-637-1453)
REFERENCEQTY.
REMARKS
Project
Location
Architect
Engineer
Contractor
Submitted by
Date
31A
99043766F
GLOBE Pendant
Specification Sheet
Product Sku:
GL-PE-LRG, GL-PE-MD, GL-PE-SM
Bulb:
1 x 60W Max medium base 13W CFL / LED retrofit.
Type:
Interior
Finishes:
Seeded glass with frosted finish globe.
Cleaning & Care:
Dust surfaces with a dry soft cloth.
Site adjustable 12' cord set.
Hard wire to junction box with included cover
plate, or specify plug end.
ELT Listed - UL/CSA equivalent.
#
RIDGELY
STUDIO WORKS
Please visit www.ridgelystudioworks.com for more information.
F L U S H & S E M I ­ F L U S H M O U N T
Topo Flushmount Ceiling DESCRIPTION
This modern drum shade is elevated to a richer, warmer
dimension with a s ophisticated combination of fabric and
wood. The bands of wood trim are spline joined around the
circumference of the shade, a delicate feat of quality
craftsmanship. Includes four 120 volt, 60 watt or equivalent
medium base A19 lamps or four 18 watt GX24Q­2 base triple
tube compact fluorescent lamps (electronic ballast included).
Incandescent version dimmable with standard incandescent
dimmer. INSTALLATION
This product can mount to either a 4" square electrical box with
round plaster ring or an octagonal electrical box (not included).
white
COLOR OPTIONS
heather gray
white
ORDERING INFORMATION
700FMTPO
COLOR
Y
HEATHER GRAY
W WHITE
M
MAPLE WOOD
W
WALNUT WOOD
FINISH
LAMP
Z ANTIQUE BRONZE
N POLISHED NICKEL
S SATIN NICKEL
INCANDESCENT 120V
­CF
COMPACT FLUORESCENT 120V
­CF277 COMPACT FLUORESCENT 277V
700FMTPO ____ ____ ____ ____ FIXTURE TYPE: ________________________________________________
7400 Linder Avenue
Skokie, Illinois 60077
Tech Lighting, L.L.C.
T 847.410.4400
F 847.410.4500
JOB NAME:
________________________________________________
NOTES:
________________________________________________
________________________________________________
________________________________________________
©2014 Tech Lighting, L.L.C. All Rights Reserved. The "Tech Lighting" graphic is a registered trademark of Tech Lighting, L.L.C.
Tech Lighting reserves the right to change specifications for product improvements without notification.
HALO
®
D ESCRIPTION
Type
Catalog #
The H995ICAT is a dedicated LED small aperture IC AIR-TITE™
housing for use with Halo RL4 Series LED modules. It is designed
for use in insulated ceilings where it will be in direct contact with
insulation*. It is an AIR-TITE™ housing designed to prevent air
flow between occupied spaces and unconditioned areas.
Project
Date
Comments
Prepared by
D ESIGN F EATURES
Housings
• Double wall aluminum construction helps dissipate heat. The inner housing can be adjusted in the plaster frame to compensate for different ceiling materials.
• Designed for insulated ceilings
in direct contact with insulation*. (May also be installed in non-insulated ceilings.)
Plaster Frame
• Galvanized steel die-formed construction.
• The inner housing can be removed from plaster frame to provide access to the junction box.
• Plaster frame features include:
- Patented regressed locking screw positioned for securing hanger bars from below the ceiling.
- Cutouts for easily crimping hanger bars in position.
- AIR-TITE aperture gasket is pre-installed.
- HALO identity embossed on plaster frame
Slide-N-Side™ Junction Box
• Positioned to accommodate
straight conduit runs
• Seven 1/2” trade size conduit
knockouts with true pry-out slots
• Slide-N-Side wire traps allow non-metallic sheathed cable to be installed without tools and without removing knockouts.
• Accepts a wide range of non-
metallic (type NM) sheathed
cables - the standard cable types used in lighting in both U.S. and Canada.
- Allows wiring connections to be made outside the junction box
- Simply insert the cable directly into the trap after connections are made.
-
Accommodates the following
standard non-metallic sheathed cable sizes:
(US) #14/2, #14/3, #12/2, #12/3
(Canada) #14/2, #14/3, #12/2
“Quick Connect” Connectors
Three quick connect wiring
connectors included.
GOT NAIL! Pass -N-Thru™ Bar Hangers
• Pre-installed nail easily installs in regular lumber, engineered
lumber and laminated beams.
• Safety and guidance system prevents snagging, ensures smooth straight nail penetration and allows bar hangers to be easily removed if necessary.
• Automatic levelling flange aligns the housing and lets you hold the housing in place with one hand while driving nails.
• Housing can be positioned at any point within 24” joist span.
• Pass-N-Thru™ feature allows bar hangers to be shortened without removing from plaster frame.
• Score lines allow “tool-less” shortening for 12” joists.
• Integral T-bar clip snaps onto T-bars - no additional clips required
LED Module Connection
Halo LED RL4 Series modules simply
install with a plug-in 120V line voltage wiring connector (UL and CSA
Listed Luminaire Disconnect). This
non-screw-base LED connection
preserves the high efficacy rating of
the luminaire (see also LED Module
specifications).
Warranty
Cooper Lighting provides a five year
limited warranty on Halo RL4 LED
Luminaires which includes the LED
Recessed Housing, and LED module.
Labels
• UL/cUL Listed 1598 Luminaire
• UL/cUL Listed for Damp Location
• UL/cUL Listed for Wet Location, with select trims
• UL/cUL listed for Feed Through
• UL/cUL listed for Direct Contact with insulation and combustible material*
Compliance
• Use with designated LED light engines and trims for ENERGY
STAR® qualification.
• Can be used for State of California
Title 24 high efficacy compliance
with designated LED light engines
and trims.
• Can be used for International
Energy Conservation Code (IECC)
high efficacy compliance with designated LED light engines
and trims.
• Refer to H4 LED Light Engine and Trim specification sheets online
for compliance information.
Qualification
IC and AIR-TITE™
Certified under ASTM-E283 and
listed UL/cUL 1598. May be used
to meet insulated ceiling* and restricted air-flow requirements such as:
• Washington State Energy Code
• International Energy Conservation Code (IECC)
• New York State Energy Conservation Construction Code (NY-ECCC)
• State of California Title 24 “Recessed Luminaires in Insulated Ceilings.”
H995ICAT
4-Inch New Construction
Insulated Ceiling AIR-TITE™
Recessed Housing
For Halo LED Module
RL4 Series
High Efficacy LED Housing
FOR USE IN
I N S U L AT E D C E I L I N G S
F O R D I R E C T C O N TA C T
W I T H I N S U L AT I O N *
A L S O S U I TA B L E F O R
NON-IC CEILINGS
* Not to be used in direct contact
with spray foam insulation.
DIMENSIONS
Can be used with
5-1/2 inch
(140 mm)
8-1/2 inch
(216 mm)
Qualified and compliant with
select LED modules. Refer
to ENERGY STAR ® Qualified
Products List and CEC (T24)
Appliance Database for
listings.
1/2 inch
(13 mm)
4-3/8 inch
(111 mm)
Ceiling opening
5-1/4 inch
(133 mm)
www.cooperlighting.com
ADV120463
December 18, 2012 4:36 PM
HALO®
H 9 9 5 I C AT
O R D E R I N G I N F O R M AT I O N
SAMPLE NUMBER: H995ICAT - RL406830WH
Complete unit includes Halo H995 series housing and RL4 LED.
Housing and RL4 LED to be ordered separately.
Housing
H995= 4” LED Housing with
dedicated LED luminaire
connector (high efficacy
compliant)
ICAT= 4" Dedicated LED Insulated Ceiling, AIR-TITE New Construction Housing
RL4 LED Module*
RL406= 4" LED Retrofit Module,
Dimmable, 120V
8= 80 CRI
30= 3000°K
WH= White Baffle and Trim Ring
SN= Satin Nickel Baffle and Trim Ring
*Refer to LED module specication sheet for additional information.
www.cooperlighting.com
Note: Specifications and Dimensions subject to change without notice.
Visit our web site at www.cooperlighting.com
Customer First Center 1121 Highway 74 South Peachtree City, GA 30269 770.486.4800 FAX 770 486.4801
Cooper Lighting 5925 McLaughlin Rd. Mississauga, Ontario, Canada L5R 1B8 905.507.4000 FAX 905.568.7049
Bronze Kube > Lanterns
1 of 3
http://www.hinkleylighting.com/product/Bronze-Kube-Lanterns-72
7/25/2014 2:57 PM
Bronze Kube > Lanterns
2 of 3
http://www.hinkleylighting.com/product/Bronze-Kube-Lanterns-72
7/25/2014 2:57 PM
Bronze Kube > Lanterns
3 of 3
http://www.hinkleylighting.com/product/Bronze-Kube-Lanterns-72
enter ema
7/25/2014 2:57 PM
D512058T
D512558T
D512058T
D512558T
SPECIFICATIONS
PARMA™ TRIM ONLY SINGLE HANDLE PRESSURE BALANCE TUB & SHOWER FAUCET
Flow Rate
Model
D512058T (Tub & Shower trim)
D512558T (Shower only trim)
2.5
GPM
Description
• Parma 5F showerhead D460055,
2.0GPM (7.6LPM) maximum flow rate @ 80 psi
• 6" brass showerarm
• Solid brass handle
• Diverter on valve (Tub & Shower only)
• For D512058T, use with valve: D113000BT
• For D512558T, use with valve: D112000BT (w/ stops) or
D115000BT (w/o stops) or D112500BT (w/ stops) or
D115500BT (w/o stops)
2
1.5
1
20
40
PSI
60
Centerjet
Wide
Massage
80
Aeration
Wide+Centerjet
Standards
• UPC/cUPC
• Energy Policy Act of 1992
MEETS ASME
A112.18.1M/ A112.18.1
D512058T shown
Finishes Available
• ASME A112.18.1M/ A112.18.1
• Chrome
• Other: Refer to Price List for
additional finish
• ADA Accessibility Guidelines for
Buildings and Facilities 4.27.4 Controls and Mechanisms
Warranty
Ø 5/8"
(Ø 16mm)
1/2"-14NPT
Ø 2 3/8"
(Ø 60mm)
Danze products are covered by a manufacturer’s
limited "lifetime" warranty for manufacturing defects.
Submittal Information:
Job Name:
Contractor:
1/2"-14NPT
1 5/8"~1 3/4"
(41mm~45mm)
20"
(508mm)
5 9/16"
(142mm)
1 3/8"~2 1/2"
(35mm~64mm)
26"
(660mm)
Ø 2 3/8"
(Ø 60mm)
65"~78"
(1651mm~1981mm)
4 3/4"
(120mm)
Ø 6 3/4"
(Ø 171mm)
Location:
Contact #:
Danze, Inc., 2500 Internationale Parkway, Woodridge, IL 60517, USA
danze.com
SD512058T/02-13.02
Avado™
Undermount Single Bowl Sink
Model EFU281610
®
SPECIFICATIONS
GENERAL
Highest quality sink fabricated of #16 (1.6mm) gauge, type 304
(18-8) nickel bearing stainless steel. Undermount.
DESIGN FEATURES
Bowl Depth: 10" (254mm).
Coved Corners: Zero radius.
Finish: Exposed surfaces have a Polished Satin finish.
Underside: Fully protected by heavy duty Sound Guard ® undercoating to dampen sound and reduce condensation.
OTHER
Drain Opening: 3-1/2" (89mm).
NOTE: All Elkay undermount sinks are designed to attach to the
underside of any solid surface countertop.
Sink complies with ASME A112.19.3-2008 / CSA B45.4-08
Model EFU281610
These sinks are listed by the International Association
of Plumbing and Mechanical Officials as meeting the
requirements of the Uniform Plumbing Code.
SINK PACKAGE(S)
MODEL
SINK
EFU281610DBG
EFU281610
BOTTOM GRID
QTY
DRAIN
QTY
LKFOBG2816SS
1
LK99
1
SINK DIMENSIONS*
Model
Number
EFU281610
Overall
L
W
L
Inside Bow l
W
D
Cutout in
Countertop
Minimum
Cabinet
Size
301/ 2
181/ 2
28
16
10
See
36
(775mm) (470mm) (711mm) (406mm) (254mm) Template** (914mm)
*Length is left to right. Width is front to back.
**Template is packed with every sink.
30-1/2"
(775mm)
28"
(711mm)
5"
(127mm)
18-1/2"
(470mm)
The template provided with each EFU sink provides
the only type of installation recommended by Elkay
.
16"
(406mm)
COUNTERTOP
SILICONE CAULK
(NOT FURNISHED)
MOUNTING
CLIP LKUCLIP8
(NOT FURNISHED)
FASTENER
(NOT FURNISHED)
10"
(254mm)
1/8" (3mm)
Countertop Overhang
(EFU Models)
SINK
1-3/8" +_ 1/4"
(35mm) (6mm)
1/8" (3mm) (APPROX.)
OVERHANG
Model EFU281610 Illustrated
In keeping with our policy of continuing product improvement, Elkay reserves the right to change
product specifications without notice. Please visit elkayusa.com for most current version of Elkay
product specification sheets.
Elkay
elkayusa.com
This specification describes an Elkay product with design, quality and functional benefits to the
user. When making a comparison of other producers’ offerings, be certain these features are not
overlooked.
2222 Camden Court
Oak Brook, IL 60523
Printed in U.S.A.
©2010 Elkay
(Rev. 01/10)
1-215D
Avado™
Undermount Single Bowl Sink
Model EFU281610
®
SPECIFICATIONS
OPTIONAL ACCESSORIES
Mounting Clips: LKUCLIP8
Utensil Caddy for Rinsing Basket: LKWUCSS
Drain: LK99
For Additional Accessories see table below
Overall
L
W
Depth/Thickness
Model Number Description
Material/Finish
Hardwood
LKCBF2816HW
Cutting Board**
27-1/2"
16-7/8"
1"
(699mm) (429mm)
(25mm)
Polished stainless steel
LKFOBG2816SS
Bottom Grid
27"
15"
1-1/8"
(29mm)
(686mm) (381mm)
Polished stainless steel
27"
15"
5 5/16"
LKFRB2816SS
Rinsing Basket
(686mm) (381mm)
(135mm)
*Length is left to right. Width is front to back.
** Fits countertop opening
LKCBF2816HW
LKFOBG2816SS
In keeping with our policy of continuing product improvement, Elkay reserves the right to change
product specifications without notice. Please visit elkayusa.com for most current version of Elkay
product specification sheets.
Elkay
elkayusa.com
LKFRB2816SS
This specification describes an Elkay product with design, quality and functional benefits to the
user. When making a comparison of other producers’ offerings, be certain these features are not
overlooked.
2222 Camden Court
Oak Brook, IL 60523
Printed in U.S.A.
©2010 Elkay
(Rev. 01/10)
1-215D
Talis S
Talis S 2-Spray HighArc Kitchen Faucet, Pull-Down, 1.5 GPM
Finishes : Steel Optik___Part no. : 04310801
Description
Item details
Features
· Swivel range 150°
List Price
· Full and needle spray
$ 625.00-
Technology
· Non-locking spray diverter
· MagFit magnetic sprayhead docking
· Flow: 1.5 GPM
· Ceramic Cartridge
Compliance
Optional accessories
· Base Plate for Focus and Talis S Kitchen Faucets,
10" (#06473USA)
Product image
Scale drawing
More details are available on our website_www.hansgrohe-usa.com_We look forward to seeing you
Page
1/1
CST412MF.10
Aquia® Close Coupled Toilet, 1.6GPF & 0.9GPF
FEATURES
•
•
•
•
•
•
Dual-Max® flushing system, low consumption
(1.6GPF/6.0LPF & 0.9GPF/3.4LPF)
Elongated bowl
Universal Height
Close coupled, elongated front bowl and tank set,
less toilet seat
Chrome push-button
10" rough-in
MODELS
• CST412MF.10
COMPONENTS
• CT412F.10 - Elongated Front Bowl, 10" rough-in
• ST412M - Tank and Cover only
• SS204 SoftClose® seat (sold separately)
• SS114 SoftClose® seat (sold separately)
COLORS/FINISHES
• Standard
#01 Cotton
CODES/STANDARDS
PRODUCT SPECIFICATION
The two-piece, universal height, low consumption
Dual-Max flushing system toilet shall be
1.6GPF/0.9GPF. Toilet shall have 10" rough-in. Toilet
shall have high-profile tank, elongated front bowl and
chrome push-button. Toilet shall be TOTO Model
CST412MF.10#01.
•
Meets and exceeds ASME A112.19.2/CSA B45.1,
ASME A112.19.14
• Certifications: IAPMO(cUPC®), EPA WaterSensesm,
State of Massachusetts, and others
• Code compliance: UPC, IPC, NSPC, NPC Canada,
and others
• Legislative compliance: California Green Building
Code, City of Los Angeles Water Efficiency
Ordinance, and others
CST412MF.10
Aquia® Close Coupled Toilet, 1.6GPF & 0.9 GPF
SPECIFICATIONS
INSTALLATION NOTES
•
Back-to-Back Toilet Installations:
TOTO recommends the use of a nationally listed,
double sanitary tee-wye only, in vertical waste stacks,
in accordance with the stipulations noted in the
majority of nationally recognized plumbing codes.
•
•
•
•
•
•
•
•
•
•
Water Use
1.6 GPF & 0.9GPF
(6.0 LPF & 3.4LPF)
Flush System
Dual-Max®
Min. Water Pressure 8 psi (flowing)
Water Surface
6" x 4-1/2"
Trap Diameter
2-1/8"
Rough-in
10"
Trap Seal
2-1/8"
Warranty
One Year Limited Warranty
Material
Vitreous china
Shipping Weight
CT412F.10 - 78lbs
ST412M - 30lbs
Shipping Dimensions CT412F.10
30-3/4" L x 17-3/8" W
x 20-1/2" H
Double Combination Wye / 1/8 Bend
YES
Double Sanitary Tee / Sanitary Cross
NO
ST412M
17-1/4" L x 7-7/8" W
x 17-1/2" H
5-1/2"
(140mm)
14-1/4"
(362mm)
18-1/2"(470mm)
27-1/2"(700mm)
15-3/8"
(390mm)
3/4" (19mm)
31-1/4"
(794mm)
17-1/8"
(435mm)
16-1/8"
(410mm)
6"
(152mm)
10"(254mm)
minimum
7-3/4"
(197mm)
10"
(254mm)
These dimensions and specifications are subject to change without notice
Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com
# SS-00454 V.06
Printed in U.S.A. | © TOTO USA 12/12 | Printed on recycled paper ♻
SS204
Oval SOFTCLOSE® Seat
FEATURES
• Elongated closed front toilet seat and cover with
SOFTCLOSE hinge system
• Mounting hardware included
MODELS
• SS204
SPECIFICATIONS
COLORS/FINISHES
• Standard
#01 Cotton
#03 Bone
#11 Colonial White
#12 Sedona Beige
#51 Ebony
•
•
•
•
Warranty
Material
Shipping Weight
Shipping Dimensions
1-year limited warranty
Polypropylene
6 lbs.
20" x 14-1/2" x 3"
PRODUCT SPECIFICATION
Seat shall be model # SS204______ Seat shall be
solid plastic with closed front seat and cover. Wide
back design shall feature a rounded cover with
integral bumpers. Hinges to be color matched with
noncorrosive nylon stud and nut.
18-1/2" (473mm)
2"
(50mm)
5-1/2"
(140mm)
14-1/4"
(361mm)
These dimensions and specifications are subject to change without notice
Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com
# SS-00345 v.02
Printed in U.S.A. | © TOTO USA 07/10 | Printed on recycled paper ƛ
8
6
7
4
5
3
2
1
*PLEASE NOTE THAT ORTAL FIREPLACES HAVE 5” LEGS, NOT SHOWN IN DRAWING
5.9in
Ø 150mm
19.0in
482mm
D
D
3.9in
Ø 100mm
C
3.9in
100mm
Option
29.7in
755mm
21.5in
546mm
6.4in
162mm
15.7in
400mm
11.4in
289mm
14.7in
373mm
5.6in
141mm
B
B
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN MM
GENERAL TOLERANCES
0-120
120-350
350-1000
1000+
BETWEEN HOLES
ANGLES
HOLES 0-20
HOLES 20+
A
0.3
0.5
1.0
2.0
0.2
1.0
0.06
0.1
ORTAL
APPROVALS
DATE
DESIGN
ELI 21.12.09
DRAWN
ELI 21.12.09
CLEAR 40TS
STAND ALONE
A
MATERIAL.
mm
weight
8
7
6
5
CHECKED
ELI 25.12.09
DWG. NO.
A
APRV
4
SIZE
SCALE
3
REV.
0
ORT 40TS STAND ALONE
NONE
2
sheet 1
1
OF
1
CDT725SSF
GE Cafe™ Series Stainless Steel Interior Dishwasher with Hidden Controls
Dimensions and Installation Information (in inches)
Electrical Rating
Voltage AC.......................................................... 120
Hertz..................................................................... 60
Total connected load amperage............ 7.1
Calrod® heater watts max............. 415/800
For use on adequately wired 120-volt,
15-amp circuit having 2-wire service
with a separate ground wire. This appliance must
be grounded for safe operation.
Installation Information: Before installing,
consult installation instructions packed with
product for ­current dimensional data.
24"
Typical
23-3/4"
29-7/8"
33-3/8" MIN.
adj to
34-5/8" MAX.
27-1/2"
PREPARE DISHWASHER ENCLOSURE
4"(toekick)
+ 1/4"
33-1/2”
to 34-3/4”
34-1/2"
Underside
Underside
ofof
Countertop
Countertop
to Floor
to Floor
This Wall Area
must be Free
of Pipes or
wires
24"
Min.
4"
Plumbing and Electric Service
Must Enter Inside This Area
6"
Figure A
For answers to your Monogram,® Cafe™ Series,
Profile™ Series or GE® appliance questions, visit
our website at geappliances.com or call GE
Answer Center® service, 800.626.2000.
Cabinets
Square
and
Plumb
24"
Min.
As an Energy Star®
by be at least 24" deep, 24"
• The rough cabinet openingListed
must
partner, GE has determined
Underwriters
that this product meets the
Laboratorieshigh from floor to underside
wide and approximately 34-1/2"
Energy Star guidelines
for energy efficiency.
of the countertop.
Specification Revised 8/13
350299
CDT725SSF
GE Cafe™ Series Stainless Steel Interior Dishwasher with Hidden Controls
Features and Benefits
•Full stainless steel interior - Enjoy an attractive appearance and long-lasting durability
•GE's most advanced wash system with 102 cleaning jets - Achieve the ultimate clean
from an industry-leading number of jets that deliver complete washing coverage to
every corner of the dishwasher
•Reversing Quad Blade Wash Arm - Dishes come out impressively clean thanks to this
revolutionary lower wash arm, with 25 spray jets reversing direction to hit items from
every angle
•Bottle Wash Jets - Hard-to-reach areas inside tall items get completely clean with four
dedicated jets integrated into the upper rack that shower water deep inside for the
ultimate clean
•Side Jets - Cascading water fills the dishwasher while hydrating soils
•Easy Touch Adjustable Upper Rack with 2 Stem Safe - Quickly adjust the upper rack
2 inches up or down to accommodate tall glassware and 10 ½” plates with plenty of
room in the bottom rack for large platters and cookie sheets
•46 dBA with status light on door - A dishwasher this quiet has a status light to let you
know it is running
• Model CDT725SSFSS - Stainless steel
CDT725SSFSS
CDT765SSFSS
Specification Revised 8/13
350299
CV936MSS
GE Café™ Series Designer Hood
Dimensions and Installation Information (in inches)
Installation Information:
Before installing, consult Use & Care/
installation instructions packed with
product for ­current dimensional data.
Optional Kits for 30" Designer hoods
JXCHSS—Stainless Chimney Kit
11
11
Telescopes for
9' and 10'
ceilings
42" min.
52" max.
12
Amp Rating
120V
Installed above a range
(shown with optional chimney kit)
Installed above a cooktop
(shown with optional chimney kit)
30
Telescopes for
9' and 10'
ceilings
42" min.
52" max.
12
3.9
30
18
18
Hood
Installation
Height
(24" to 36")
21
(Standard 8 ft. ceiling 96")
36
Hood
Installation
Height
(24" to 36")
21
36
Listed by
Underwriters
Laboratories
For answers to your Monogram® or GE® appliance
questions, visit our website at geappliances.com
or call GE Answer Center® service, 800.626.2000.
Specification Revised 3/13
220976
CV936MSS
GE Café™ Series Designer Hood
Features and Benefits
• Designer Hood - Tall designer hood design adds a striking and
sophisticated look to any kitchen
• 590 CFM - Powerful 590 CFM performance removes smoke and
vapors from the cooking area
• Four Speed Fan Control - Powerful variable speed exhaust system
effectively pulls smoke and vapors out of your kitchen
• Vertical Exhaust - Vent connects to duct work through the top of
the hood
• Halogen Cooktop Light(s) - Provides bright light that illuminates
the cooking surface below the hood
• Nightlight - Ideal light setting to use as nightlight for the kitchen
• Removable Grease Filter - Durable filters can be removed for easy
cleaning and maintenance
• Model CV936MSS – Stainless steel
CV936M
Specification Revised 3/13
220976
CEB1590SS
Cafe™ Series 1.5 Cu. Ft. Countertop Convection/Microwave Oven
Dimensions and Installation Information (in inches)
Exterior Dimensions (in inches)
W x H x D
22-5/8 x 14-3/4 x 20
Optional Accessory Trim Kits for GE Microwave Ovens
(Available at additional cost)
For a custom built-in appearance, these kits allow built-in
installation of the countertop microwave oven into a wall or
cabinet alone and are U.L. approved for installation over a
GE single electric wall oven. These kits should not be installed
over a gas wall oven.
Accessory trim kits
"Z"
Max Height
Trim Kits
30" Deluxe
29-3/4"
20-7/8"
CX1530SSSS
27" Deluxe
26-3/4"
20-7/8"
CX1527SSSS
Note: 120V, 60-cycle, grounded power receptacle location
optional on back within cabinet opening.
Installation Information: This information is not intended to
be used for installing unit described. Before installing, consult
installation instructions packed with product/kit for current
dimensional data.
For answers to your Monogram,® Cafe™ Series
or Profile™ Series appliance questions, visit
our website at geappliances.com or call GE
Answer Center® service, 800.626.2000.
Listed by
Underwriters
Laboratories
Specification Revised 12/13
240377
CEB1590SS
Cafe™ Series 1.5 Cu. Ft. Countertop Convection/Microwave Oven
Features and Benefits
• 1.5 cu. ft. capacity - 1000 Watts (IEC-705 test procedure)
• Convection cooking - Choose this setting when baking or
browning is desired
• Sensor cooking controls - Automatically adjusts time and power
for delicious cooking results
• Easy-set control dial - Enjoy how simple the control dial makes
setting the oven or selecting recipes
• Optional built-in trim kit - Achieve a custom appearance and
built-in convenience with a sleek, matching trim kit
• Removable oven rack - Full-width cooking rack allows for
multi-level cooking simultaneously, allowing you to cook large
quantities of your family’s favorites
• Recessed turntable - Maximizes oven space and flush design
easily accommodates multiple dishes
• Model CEB1590SSSS – Stainless steel
Listed by
Underwriters
Laboratories
Specification Revised 12/13
240377
CWS21SSE
GE Café™ Series 20.7 Cu. Ft. French-Door Counter-Depth Refrigerator
Height to top of hinge (in.) A
69-5/8
Height to top of case (in.) B
69
Case depth without door (in.) C
23-7/8
Case depth less door handle (in.) D
28-1/2
Case depth with door handle (in.) E
31-3/8
Depth with fresh food door open 90˚ (in.) F
43-1/2
Width (in.) G
35-3/4
Width with door open 90˚ inc. door handle (in.) H
44
Each side (in.)
1/8
Top (in.)
1
Back (in.)
2
Dimensions (in inches)
H
G
C
A B
D
Overall
Dimensions
Front View
Height to top of hinge (in.) A
69-5/8
Height to top of case (in.) B
F
69
Above illustration intended for dimensional
Case depth without door (in.) C
23-7/8
reference only. Refer to photography for
Case actual
depth less
door handle
(in.) D
28-1/2
product
appearance.
Case depth with door handle (in.) E
31-3/8
Depth with fresh food door open 90˚ (in.) F
43-1/2
Width (in.) G
35-3/4
Width with door open 90˚ inc. door handle (in.) H
For answers to your Monogram,® Profile™
Series or GE® appliance questions, visit our
website at geappliances.com or call GE
Answer Center® service, 800.626.2000.
E
Top View
Air
Clearances
Air
Clearances
Overall
Dimensions
Dimensions and Installation Information (in inches)
Each side (in.)
Top (in.)
Back (in.)
44
1/8
Listed by
Underwriters
1
Laboratories
2
Specification Revised 9/13
210844
CWS21SSE
GE Café™ Series 20.7 Cu. Ft. French-Door Counter-Depth Refrigerator
Features and Benefits
• Internal water dispenser with GE water filtration - Delivers filtered water with one touch
• Factory-installed icemaker with water filtration system - Refrigerator comes ready to
automatically create filtered ice
• 2 adjustable-humidity drawers and 1 full-width adjustable-temperature drawer
• Multi-level freezer baskets - Keep frozen foods organized and easy to find
• Upfront temperature controls with actual temperature display - Easy-to-reach controls display
accurate temperatures
• GE water filtration uses MWF replacement filter
• CWS21SSESS - Stainless Steel
CWS21SSE
Specification Revised 9/13
210844