Architectural Catalogue 3 info@duluce.co.uk | www.duluce.co.uk Portland gate, Leeds Metropolitan University, vertical light shaft info@duluce.co.uk | www.duluce.co.uk This catalogue has been put together to work alongside lighting specifiers, bringing some of the best quality architectural lighting products currently available, not just in terms of visual design, but also in terms of harnessing the best technological advances, particularly in LED. The catalogue can also be found on our website www.duluce.co.uk, In here you will find simply an overview of what we supply. By no means is this an exhaustive product supply, catalogue, on many occasions we can adapt existing product to meet your requirements, ie, special paint finishes/colours, unusual lengths of profile, whatever it may be, please ask and we will do our utmost to accommodate your request. Wherever possible products are designed from scratch, thermal and lumen testing are a constant part of this development, as well as a great desire to create something unique and special. info@duluce.co.uk | www.duluce.co.uk Contents Interior lighting Lighting systems Page 6-20 Downlights Page 22-51 Ceiling/wall Page 52-59 In-ground Page 60-68 info@duluce.co.uk | www.duluce.co.uk Lighting systems Alternative lines of light…. 6 info@duluce.co.uk | www.duluce.co.uk 2cude system -Suspended extruded aluminium profile -Anodized or painted finish. -Small outline size of 77mm x 41mm -Suitable for linear LED direct or indirect -Up to 3 circuit track -Custom lengths for system design. -90 degree corner pieces, T joints, X joints -Dimmable available, 1-10v or DALI -Emergency options also available. -Height adjustment via clutch suspension barrels Duluce reserve the right to change product specification without notice info@duluce.co.uk | www.duluce.co.uk 7 building the system…. Direct LED light * Photometric data online - - - - - - - - 8 3000k or 4000k colour options CRI 80+ standard, CRI 90 available Up to 105 system lumens per watt Efficient Low glare filter diffusor Individual module length of 552mm Continuous versions available End tab fixing for end of LED line -Dimming available with DALI or 1-10v Length Colour k lumens System lumens System, wattage current 552mm 4000k 1950 1460 13.8 700ma 552mm 3000k 1825 1365 13.8 700ma Duluce reserve the right to change product specification without notice info@duluce.co.uk | www.duluce.co.uk Indirect LED * Photometric data online -4000k or 3000k colour options -CRI 80+ as standard 90+ available -Module lengths 250mm and 500mm -Continuous versions available -Up to 125 lumens per watt -Switchable only -Constant voltage supply to board System lumen data is excluding any diffusor cover Length Colour k lumens System lumens System wattage voltage 500mm 4000k 450 445 3.7 24v 500mm 3000k 425 421 3.7 24v 3 Circuit track - 240v ,16 amp track -Up to 3 separate circuits -white black or silver -jointing accessories available -widely compatible -Dali option -Standard 1,2 and 3 meter lengths -lengths cut to size Duluce reserve the right to change product specification without notice info@duluce.co.uk | www.duluce.co.uk 9 Profile and accessories -White 2cude profile cut to length, max single length 3m CODE 2C-P01.W -Anodised 2cude profile cut to length, max single length 3m-CODE 2C-P01.AS -90 degree with either 3 circuit track or blank -T shape with either 3 circuit track or blank -X shape with either 3 circuit track or blank -Single mid length suspension wire -Coupling suspension unit -End cap -Emergency recessed micro downlight 10 Duluce reserve the right to change product specification without notice info@duluce.co.uk | www.duluce.co.uk Assembly The 2cude system is pre assembled in the factory as much as possible to make site installation as straight forward as possible. Duluce reserve the right to change product specification without notice info@duluce.co.uk | www.duluce.co.uk 11 Profile Dual -Extruded aluminium profile in silver anodized or painted finish. -Suitable for linear LED or linear T5. -Available in standard suspension lengths. -Custom lengths available for system design. -Accessories available such as 90 degree corner pieces, T joints, X joints and L joint pieces -Recessed 3 circuit track. -Dimmable available, 1-10v, DSI or DALI -Emergency options also available. Harris Museum Preston, using Dual profile, special white finish, linear T5 inserts, with recessed 3 circuit track, integral LED emergency lighting, special exit signs, T ,X and L joint pieces. Standard lengths with MPO diffusor 12 Duluce reserve the right to change product specification without notice info@duluce.co.uk | www.duluce.co.uk Profile dual Standard lengths with Opal diffusor Accessories X joint 3 circuit track insert T joint L joint Portland Gate, Leeds Metropolitan University, Dual system mounted Vertically on an angle, with T5 front and back and integral emergency Duluce reserve the right to change product specification without notice info@duluce.co.uk | www.duluce.co.uk 13 Barr-C profile -Suspended or wall mounted extruded aluminium profile -Available in raw aluminium, anodized silver, or powder coated finish. -T5 or LED downlight , 7w pm LED indirect light. -Available in standard suspension lengths of 1.2m, 1.5m, 1.7m, 2.25m, 2.8m -Custom lengths available for system design. -T5 HF and DALI dimmable. -LED dimmable and non dimmable -LED indirect light non dimmable -Emergency version via Micro LED downlight -Blank aluminium modules available for infill -Photocell sensor mounted in 62mm end plates -Laser cut end caps with countersunk holes -Wall mounted version available Luminaire data A * Photometric data online T5 downlight efficiency with white Opal Lumeio diffusor A LOR- 61% DLOR-61% Without diffusor B LOR-82% DLOR-82% LED downlight efficiency( 4000k) with white Opal Lumeio diffusor B LOR-71% DLOR-71% Without diffusor LOR-93% DLOR-93% LED indirect light always 3000k LOR-99% ULOR-99% Other diffusors available upon request 14 Duluce reserve the right to change product specification without notice info@duluce.co.uk | www.duluce.co.uk T5 direct/LED indirect 1200mm length – 28w/54w direct 7w 3000k LED indirect 1500mm length- 35/49w direct 7w 3000k LED indirect Larger sizes available as system design, i.e. 2400mm, 2800mm, 80w T5 also available upon request. LED direct( 3000k, 4000k)/indirect (3000k) 1200mm length- 26w direct( 3300 lumen), 7w indirect 1700mm length- 39w direct (4950 lumen), 11w indirect Larger sizes available for system design, i.e. 2250mm, 2800mm Accessories 4 way ball claw Specially designed 4 way suspension point for joining neatly 2 pieces of Bar C, doing away with the need for 2 ceiling suspension wires. Additional bridging tab and Tension springs to keep profile joints in line. 2 way standard suspension Wall mounted adjustable arm Duluce reserve the right to change product specification without notice info@duluce.co.uk | www.duluce.co.uk 15 3 hour integral emergency 3 hour emergency unit including battery, module and miniature LED downlight. 2 lumen outputs; 3w- 132 lumens 1.5w 65 lumens Daylight linking and PIR Fully programmable presence detection And daylight linking Care and installation When raw aluminium is installed. - Clean gloves must be worn when installing the product, finger prints will show and should be removed. - Any maintenance or cleaning must carried out when the power is switched off. - For cleaning the aluminium , a dry paper cloth should be used initially, if tougher marks need removing use ‘Lotoxane’ (on a dry clean cloth) which is a degreasing agent. If in doubt please ask us, as using the wrong cleaning fluid could damage the surface of the aluminium. Do not use water!! - The light fitting should be cleaned regularly to keep dust off the top of the product, a dry cloth should be used for this . - Failure to clean regularly could result in marks on the aluminium and the loss of light form the top of the profile. 16 Duluce reserve the right to change product specification without notice info@duluce.co.uk | www.duluce.co.uk S line 150 -Linear LED graze wash-light -Surface mounted -Formed metal housing painted -RGB or single colour white -Dimmable via DMX OR DALI -Adjustable LED mount for tailoring -Special project designed luminaire * Photometric data online Code LED type Dimming type Supply to LED length SL150.OO.RGB RGB DMX Constant voltage 1500mm SL150.00.WW 3000K DALI Current or voltage 1500mm SL150.00.CW 4000K DALI Current or voltage 1500mm Duluce reserve the right to change product specification without notice info@duluce.co.uk | www.duluce.co.uk 17 Line 24 common -Extruded aluminium profile base -Small outline size of 21mm width 18mm height -3000k or 4000k -110 lumen per watt efficiency -Suitable for linear LED as cove or direct light -Custom lengths for system design. -Non dimmable as standard -Clear frosted or milky white diffusing options Luminaire data * Photometric data online Duluce constant voltage board available as 3000k or 4000k cri 80< approximate lumens per watt at 110 at 3000k. LED life estimated at 50,000 hours Type Description 420B 3.7w 800B 7.4w 450 lumens 500mm module length Power 900 lumens 1000mm module length Diffusor transmission values Type Clear Frosted Milk Transmission of light 92% 82% 62% Accessories Plastic mount clip 18 Duluce reserve the right to change product specification without notice 24v LED driver 18w, 30w 50w 60w. info@duluce.co.uk | www.duluce.co.uk Lighting Systems 5029 – Surface Mount Three-Circuit Track Product Codes - Surface 5029.001.1 5029.001.2 5029.001.3 5029.002.1 5029.002.2 5029.002.3 5029.003.1 5029.003.2 5029.003.3 5029.004.1 5029.004.2 5029.004.3 - 1000mm length surface mounted track, white 1000mm length surface mounted track, black 1000mm length surface mounted track, alu 2000mm length surface mounted track, white 2000mm length surface mounted track, black 2000mm length surface mounted track, alu 3000mm length surface mounted track, white 3000mm length surface mounted track, black 3000mm length surface mounted track, alu 4000mm length surface mounted track, white 4000mm length surface mounted track, black 4000mm length surface mounted track, alu 5030 – Recess Mount Product Codes - Recess 5030.001.1 5030.001.2 5030.001.3 5030.002.1 5030.002.2 5030.002.3 5030.003.1 5030.003.2 5030.003.3 5030.004.1 5030.004.2 5030.004.3 - 1000mm length recess mounted track, white 1000mm length recess mounted track, black 1000mm length recess mounted track, alu 2000mm length recess mounted track, white 2000mm length recess mounted track, black 2000mm length recess mounted track, alu 3000mm length recess mounted track, white 3000mm length recess mounted track, black 3000mm length recess mounted track, alu 4000mm length recess mounted track, white 4000mm length recess mounted track, black 4000mm length recess mounted track, alu 5029.005 5029.006 Product Codes – Accessories 5029.005.1 5029.005.2 5029.005.3 5029.006.1 5029.006.2 5029.006.3 5029.007.1 5029.007.2 5029.007.3 5029.008.1 5029.008.2 5029.008.3 5029.009.1 5029.009.2 5029.009.3 5029.010.1 5029.010.2 5029.010.3 - End Feed, white End Feed, black End Feed, alu Middle Feed, white Middle Feed, black Middle Feed, alu End Cap, white End Cap, black End Cap, alu Straight Connector, white Straight Connector, black Straight Connector, alu Adjustable corner, white Adjustable corner, black Adjustable corner, alu Flexible corner, white Flexible corner, black Flexible corner, alu Duluce reserve the right to change product specification without notice 5029.007 5029.009 5029.008 5029.010 info@duluce.co.uk | www.duluce.co.uk 19 Lighting Systems Three-Circuit Track Product Codes – Accessories 5029.011.1 - ‘L’ connector (left), white 5029.011.2 - ‘L’ connector (left), black 5029.011.3 - ‘L’ connector (left), alu 5029.012.1 - ‘L’ connector (right), white 5029.012.2 - ‘L’ connector (right), black 5029.012.3 - ‘L’ connector (right), alu 5029.013.1 - ‘T’ connector, white 5029.013.2 - ‘T’ connector, black 5029.013.3 - ‘T’ connector, alu 5029.014.1 - ‘X’ connector, white 5029.014.2 - ‘X’ connector, black 5029.014.3 - ‘X’ connector, alu 5029.015 - Rod Suspension set, 1000mm, 200N max. 5029.016 - Wire Suspension set, 1500mm, 150N max. 5029.017.1 - Ceiling clamp, white 5029.017.2 - Ceiling clamp, black 5029.017.3 - Ceiling clamp, alu 5029.018.1 - Suspension clamp, white 5029.018.3 - Suspension clamp, alu 5029.019.3 - Wall bracket, alu 5030.005.1 - Cover plate for recessed track feeds, white 5030.005.2 - Cover plate for recessed track feeds, black 5030.006.1 - Cover plate for ‘L’ ‘T’ & ‘X’ connector for recess track, white 5030.006.2 - Cover plate for ‘L’ ‘T’ & ‘X’ connector for recess track, black 5029.TL - Bending tool for installing 5029.015 20 5029.011 & 5029.012 5029.013 5029.014 5029.017 5029.018 5030.005 5030.006 5029.019 5029.016 Duluce reserve the right to change product specification without notice info@duluce.co.uk | www.duluce.co.uk Downlights info@duluce.co.uk | www.duluce.co.uk 21 Duluce’s own MR-MT LED engine The MR-MT engine is compatible with all the downlights except the soft 40. Currently the MR-MT can produce up to 1200 lumens, for higher lumen packages please contact us. 22 info@duluce.co.uk | www.duluce.co.uk MR-MT-2 Overview -LED insert for downlight modules -Narrow, medium and wide beam options -Cold pressed pure aluminium heat sink -Constant current design -Cree LED -CRI options >80/>90 -3000k, 4000k. -Single point LED for smoother beam -Drive options from 185ma – 350ma -Lumens output from 500- 1100. Dimensions -Reflector diameter at front 50mm -heat sink diameter 70mm -total height 77mm Technical data -Forward voltage- 36v -Cree MTG-2 LED -Maximum drive current 350ma -Beam angles 17, 36 and 50 degree -70% lumen maintenance at 40000 hours( 350ma version) -Dimmable driver options 1-10v, DALI -Independently tested by LUX TSI Performance data- inclusive of driver, module and reflector 3000k 200ma version -10w – module efficacy 60-61 lumens p/watt * Photometric data online Beam width 17 35 50 Lumens 611 606 600 350ma version- 15.7w- module efficacy 60 lumens per watt 17 degree 36 degree * Photometric data online Beam width 17 35 50 Lumens 948 939 935 Duluce reserve the right to change product specification without notice 50 degree info@duluce.co.uk | www.duluce.co.uk 23 Soft Trimless 40 Trimless miniature downlight for plaster ceilings Die cast aluminium plaster installation kit Small aperture 40mm Deep recessed lamp for minimal glare Easy re-lamping with twist and lock action Perma white or matt black internal finish Overall diameter 40mm Ceiling cut out 47mm Maximum height 95mm Transformer to be ordered separately WH = Perma White finish BK = Matt Black finish Fixing Lamp Orientation Colour 1012. 11 - MR11 (low voltage) fixed .01 - White MR11 LED .02 black Ref Number: 1012.colour/lamp Lamp MR11( low voltage or LED Lamp holder GU4 Lamp wattage 20-25w or 5w LED 24 Duluce reserve the right to change product specification without notice info@duluce.co.uk | www.duluce.co.uk Soft Trimless 40 angled Trimless miniature downlight for plaster ceilings Die cast aluminium plaster installation kit Pre angled to 25° Small aperture 40mm Deep recessed lamp for minimal glare Easy re-lamping with twist and lock action Perma white or matt black internal finish Overall diameter 40mm Ceiling cut out 47mm Maximum height 95mm Transformer to be ordered separately WH = Perma White finish BK = Matt Black finish Fixing Lamp Orientation Internal Colour 1012.A. 11 - MR11 (low voltage) Fixed angle .01 White MR11 LED .02 black Ref Number: 1012.A.coloiur/Lamp Lamp QR-CBC 35/LED Lamp holder GU4/LED Lamp wattage 20-35/5w Duluce reserve the right to change product specification without notice info@duluce.co.uk | www.duluce.co.uk 25 Soft Trimless 70 Trimless downlight for plaster ceilings Die cast aluminium plaster installation kit Deep recessed lamp for minimal glare Easy re-lamping with twist and lock action Perma white or matt black internal finish Overall diameter 70mm Ceiling cut out 79mm Maximum height 160mm Control gear to be ordered separately Accessories to be ordered separately WH = Perma White finish BK = Matt Black finish Fixing Lamp Orientation Trim Color IP rating 1013. MR - MR16 (low voltage) Fixed .01 White .IP- IP44 rating MH - CMH/ (Metal Halide) .02 Black MR50-LED Ref Number: 1013.colour/lamp/IP Lamp MR16 (low voltage) or metal halide or LED Lamp holder GU5.3 or GX10 or LED Lamp wattage 20-50W OR 20-35W OR 8-18W 26 Duluce reserve the right to change product specification without notice info@duluce.co.uk | www.duluce.co.uk Soft Trimless 70 adjustable Trimless downlight for plaster ceilings Adjustable to 15° Die cast aluminium plaster installation kit Deep recessed lamp for minimal glare Easy re-lamping with twist and lock action Perma white or matt black internal finish Overall diameter 70mm Ceiling cut out 79mm Maximum height 160mm Control gear to be ordered separately Accessories to be ordered separately WH = Perma White finish BK = Matt Black finish Fixing Lamp Orientation l Colour IP rating 1014. MR - MR16 (low voltage) Adjustable .01 White IP- IP44 rating CMH (Metal Halide) .02 Black MR50 LED Ref Number: 1014.colour/lamp/IP Lamp M16 (low voltage) or metal halide or LED Lamp holder GU5.3 or GX10 or LED Lamp wattage 20-50w or 20-35w or 8-18w Duluce reserve the right to change product specification without notice info@duluce.co.uk | www.duluce.co.uk 27 Soft Trimless 70 square Square Trimless downlight for plaster ceilings Die cast aluminium plaster installation kit Deep recessed lamp for minimal glare Easy re-lamping with twist and lock action Perma white or matt black internal finish Overall size 70mm x 70mm Ceiling cut out 84 x 84mm Maximum height 160mm Control gear to be ordered separately Accessories to be ordered separately WH = Perma White finish BK = Matt Black finish Fixing Lamp Orientation Colour Pirating 1013.SQ MR - MR16 (low voltage) Fixed .01 White IP-IP44 rating CMH (Metal Halide) .02 black MR50 LED Ref Number: 1013.SQ/colour/lamp/IP Lamp MR16 (low voltage) or metal halide or LED Lamp holder GU5.3 or GX10 or LED Lamp wattage 20-50w or 20-35w or LED 28 Duluce reserve the right to change product specification without notice info@duluce.co.uk | www.duluce.co.uk Soft Trimless 70 square adjustable Adjustable square Trimless downlight for plaster ceilings Die cast aluminium plaster installation kit Adjustable to15° Deep recessed lamp for minimal glare Die cast body Easy re-lamping with removable body Perma white or matt black internal finish Overall size 70mm x 70mm Ceiling cut out 84 x 84mm Maximum height 160mm Transformer to be ordered separately Accessories to be ordered separately Fixing Lamp Orientation Colour IP rating 1014.SQ MR - MR16 (low voltage) Adjustable .01 White .IP- IP44 rating CMH (Metal Halide) .02 Black MR50-LED Ref Number: 1014.SQ.colour/lamp/IP Lamp MR16(low voltage) or metal halide or LED Lamp holder GU5.3 or GX10 or LED Lamp wattage 20-50w or 20-35w or 8-18w Duluce reserve the right to change product specification without notice info@duluce.co.uk | www.duluce.co.uk 29 Focus 90 adjustable Focus 90 adjustable downlight Deep recessed lamp for minimal glare Black internal baffle Adjustable to 30° with rotation through 350° White and black finish available Easy re-lamping with magnetic front Overall diameter 90mm Ceiling cut out 73mm Maximum height 85mm Transformer to be ordered separately Accessories to be ordered separately WH = White finish BK = Black finish Fixing Lamp Trim Colour IP Rating 1016 MR - MR16 (low voltage) WH White IP - IP44 MH - CMH/MR16 (Metal Halide) BK Black LED -MR-50-LED engine Ref Number: 1016.01-WH 1016.02-BK Lamp QR-CBC 51 or LED or CMH/MR16 Lamp holder GU5.3 or GX10 or LED Lamp wattage 20-50w or 20-35W or 8-18wLED 30 Duluce reserve the right to change product specification without notice info@duluce.co.uk | www.duluce.co.uk 100 fixed Fixed low luminance downlight with bezel trim. Deep recessed lamp position for minimal glare. Always white ceiling trim Reflector with colour options( see below) Overall diameter of ceiling trim 100mm. Ceiling cut out 90mm Maximum height 115mm with MR50 LED module Control gear to be ordered separately. Please consult duluce for details Fixing Lamp Optic Colour IP Rating 100. MR16 ( low voltage) Sppolished IP- IP54 CMH- Metal halide SA- satin silver MR50 LED WH-white BL- black Ref Number 100.colour/lamp/ip Lamp MR16 ( halogen),metal halide or LED Lamp holder GU5.3, GX10 or LED Lamp wattage 20-50w(halogen) 20-35(metal halide) 6-15w LED. Duluce reserve the right to change product specification without notice info@duluce.co.uk | www.duluce.co.uk 31 100 wall wash Fixed lensed wall wash low luminance downlight with bezel trim. Deep recessed lamp position for minimal glare. Always white ceiling trim Overall diameter of ceiling trim 100mm. Ceiling cut out 90mm Maximum height 150mm with MR50 LED module Control gear to be ordered separately. Please consult duluce for details IP54 available from ceiling underside not above Maximum ceiling thickness 25mm Fixing Lamp Optic Colour IP Rating 100. MR16 ( low voltage) Sppolished IP- IP54 CMH- Metal halide SA- satin silver MR50 LED WH-white BL- black 32 Ref Number 100.colour/lamp/ip Lamp MR16 ( halogen),metal halide or LED Lamp holder GU5.3, GX10 or LED Lamp wattage 20-50w(halogen) 20-35(metal halide) 6-15w LED. Duluce reserve the right to change product specification without notice info@duluce.co.uk | www.duluce.co.uk Pinhole 90 fixed Fixed pinhole downlight with overlap flange for installation into already finished ceilings. Deep recessed lamp position for minimal glare. Easy re-lamping with ball catch mechanism. Front plate white finish, with the aperture edge finished matt black as standard. Other colour finishes to order Overall diameter of ceiling trim 89mm. Overall diameter of luminaire 92mm. Ceiling cut out 83mm Maximum height 90mm Luminaire can accept an additional 2 accessories to be specified separately. Kit for multi lamp option available Control gear to be ordered separately. Please consult duluce for details Fixing Lamp Trim Colour IP Rating 1001. MR16 ( low voltage) .01-white IP- IP44 CMH- Metal halide .02 -black MR50 LED Ref Number: 1001.colour/lamp/ip Lamp MR16(low voltage) or metal halide or LED Lamp holder GU5.3 or GX10 or LED Lamp wattage 20-50w or 20-35w or 8-18w Duluce reserve the right to change product specification without notice info@duluce.co.uk | www.duluce.co.uk 33 Pinhole 90 plaster-in Fixed pinhole downlight with plaster kit for seamless flush installation. Deep regressed lamp position for minimal glare. Easy re-lamping with ball catch mechanism. Front plate white finish, with the aperture edge finished matt black as standard. Other colour finishes to order. Overall diameter of ceiling trim 94mm. Overall size of mesh plate 175 x 175mm. Overall diameter of luminaire 92mm. Ceiling cut out 83mm. Maximum height 90mm. Luminaire can accept an additional 2 accessories. To be specified separately. Control gear to be ordered separately. Kit for multi-lamp versions available Please consult Duluce Lighting for details. Fixing Lamp Trim Colour IP Rating 1001.PI MR16 ( low voltage) .01-white IP- IP44 CMH- Metal halide .02 -black MR50 LED Ref Number: 1001.PI.colour/lamp/ip Lamp MR16(low voltage) or metal halide or LED Lamp holder GU5.3 or GX10 or LED Lamp wattage 20-50w or 20-35w or 8-18w 34 Duluce reserve the right to change product specification without notice info@duluce.co.uk | www.duluce.co.uk Pinhole 90 adj Accent pinhole downlight with overlap flange for installation into already finished ceilings 35° tilt and 360° rotation Deep regressed lamp position for minimal glare. Easy re-lamping with ball catch mechanism. Front plate white finish, with the aperture edge finished matt black as standard. Other colour finishes to order. Overall diameter of ceiling trim 94mm. Overall diameter of luminaire 92mm. Ceiling cut out 83mm. Maximum height 90mm. Luminaire can accept an additional 2 accessories. To be specified separately. Control gear to be ordered separately. Kit for multi-lamp versions available Please consult Duluce Lighting for details. Fixing Lamp Trim Colour IP Rating 1002. MR16- low voltage .01 white IP-IP44 CMH metal halide .02 black MR50 LED Ref Number: 1002.colour/IP/lamp Lamp MR16( low voltage) or metal halide or LED Lamp holder GU5.3 or GX10 or LED Lamp wattage 20-50w or 20-35w or 8-18w Duluce reserve the right to change product specification without notice info@duluce.co.uk | www.duluce.co.uk 35 Pinhole 90 adj plaster-in Accent pinhole downlight with plaster kit for seamless flush installation. 35° tilt and 360° rotation Deep regressed lamp position for minimal glare. Easy re-lamping with ball catch mechanism. Front plate white finish, with the aperture edge finished matt black as standard. Other colour finishes to order. Overall diameter of ceiling trim 94mm. Overall size of mesh plate 175 x 175mm. Overall diameter of luminaire 92mm. Ceiling cut out 83mm. Maximum height 90mm. Luminaire can accept an additional 2 accessories. To be specified separately. Control gear to be ordered separately. Kit for multi-lamp versions available Please consult Duluce Lighting for details. Fixing Lamp Trim Colour IP Rating 1002.PI MR16 low voltage .01 white IP-IP44 CMH metal halide .02 black MR50 LED Ref Number: 1002.PI/colour/lamp/IP Lamp MR16 (low voltage) or metal halide or LED Lamp holder GU5.3 or GX10 or LED Lamp wattage 20-50w or 20-35w or 8-18w 36 Duluce reserve the right to change product specification without notice info@duluce.co.uk | www.duluce.co.uk Pinhole 90 sq Adjustable square aperture downlight. 35° tilt and 360° rotation. Deep regressed lamp position for minimal glare. Easy re-lamping. Magnetic front cover plate and removable lamp housing with ball catch mechanism. Mounting ring for installation into existing ceilings, minimal visible trim. Other finishes to order - white as standard. Ceiling trim 90 x 90mm. Ceiling cut out 83 x 83mm. Maximum height 110mm Control gear to be ordered separately. Accessories to be ordered separately. Fixture Lamp Trim colour IP rating 1004. MR - MR16 (low voltage) .01 white IP-IP44 MH - CMH/MR16 (Metal Halide) .02 black MR50 LED Ref Number: 1004.colour/lamp/IP Lamp MR16(low voltage) or metal halide or LED Lamp holder GU5.3 or GX10 or LED Lamp wattage 20-50w or 20-35w or 8-18w Duluce reserve the right to change product specification without notice info@duluce.co.uk | www.duluce.co.uk 37 Pinhole 90 sq adj plaster in Adjustable square aperture downlight. 35° tilt and 360° rotation. Deep regressed lamp position for minimal glare. Easy re-lamping. Magnetic front cover plate and removable lamp housing with ball catch mechanism. Flush trim with mesh plate for plaster installation. Other finishes to order - white as standard. Overall diameter of ceiling trim 90x90mm Overall size of mesh plate 175mm x 175mm Ceiling cut out 83 x 83mm. Maximum height 110mm Control gear to be ordered separately. Accessories to be ordered separately. Fixture Lamp Trim Colour IP rating 1004.PI MR - MR16 (low voltage) .01 white IP-IP44 MH - CMH/MR16 (Metal Halide) .02 black MR50 LED Ref Number: 1004.PI.colour/lamp/IP Lamp MR16 ( low voltage) or metal halide or LED Lamp holder GU5.3 or GX10 or LED Lamp wattage 20-50w or 20-35w or 8-18w 38 Duluce reserve the right to change product specification without notice info@duluce.co.uk | www.duluce.co.uk Prospex plus round fix flat plaster in Recessed round fixed downlight with one piece die cast pinhole plate for trimless. Easy to install with separate plaster-in installation kit and pinhole plate. Components installed with ball-catches. Luminaire is standard with a clear safety glass. IP44 as standard. White standard finish. Black available to order. Overall diameter 100mm Aperture diameter 55mm Ceiling cut out 102mm Maximum height 100mm Luminaire can accept an additional 2 accessories. To be specified separately. Specify lamp wattage and beam angle separately. Control gear to be specified separately. Fixture Orientation Lamp Trim Colour 1020.04 Fixed MR16 (low voltage) White as standard Metal halide Other colours available MR50 LED Ref Number: 1020.04/lamp Lamp MR16 ( low voltage) or metal halide or LED Lamp holder GU5.3 or GX10 or LED Lamp wattage 20-50w or 20-35w or 8-18w Duluce reserve the right to change product specification without notice info@duluce.co.uk | www.duluce.co.uk 39 Prospex plus round adj flat plaster in Recessed round adjustable downlight with one piece die cast pinhole plate for trimless. Easy to install with separate plaster-in installation kit, adjustable cartridge and pinhole plate. Components installed with ball-catches. Hot aiming, allows focusing while the lamp is on and installed. 45° tilt, 360° rotation. Keyed installation of the adjustable cartridge ensures correct alignment after maintenance. Luminaire is standard with a clear safety glass. IP44 as standard. White standard finish. Black available to order. Overall diameter 100mm Aperture diameter 55mm Ceiling cut out 102mm Maximum height 115mm Luminaire can accept an additional 2 accessories. To be specified separately. Specify lamp wattage and beam angle separately. Control gear to be specified separately. Fixture Orientation Lamp Trim Colour 1020.05 adjustable MR16 halogen White as standard Metal halide Other finishes available MR50 LED Ref Number: 1020.05/lamp Lamp MR16(low voltage) or metal halide or LED Lamp holder GU5.3 or GX10 or LED Lamp wattage 20-50w or 20-35w or 8-18w 40 Duluce reserve the right to change product specification without notice info@duluce.co.uk | www.duluce.co.uk Prospex plus round conical fix plaster in Recessed round fixed downlight with one piece die cast conical front plate for trimless installation. Easy to install with separate plaster-in installation kit and conical front plate. Components installed with ball-catches. Luminaire is standard with a clear safety glass. IP44 as standard. White standard finish. Black available to order. Overall diameter 100mm Aperture diameter 90mm Ceiling cut out 102mm Maximum height 110mm. Luminaire can accept an additional 2 accessories. To be specified separately. Specify lamp wattage and beam angle separately. Control gear to be specified separately. Fixture Orientation Lamp Trim Colour 1020.01 Fixed M16 ( low voltage) White as standard CMH- metal halide Other colours available MR50 LED Ref Number: 1020.01/lamp Lamp MR16 (low voltage) or metal halide or LED Lamp holder GU5.3 or GX10 or LED Lamp wattage 20-50w or 20-35w or 8-18w Duluce reserve the right to change product specification without notice info@duluce.co.uk | www.duluce.co.uk 41 Prospex plus round conical adj plaster in Recessed round adjustable downlight with one piece die cast conical front plate for trimless installation. Easy to install with separate plaster-in installation kit, adjustable cartridge and conical front plate. Components installed with ball-catches. Hot aiming, allows focusing while the lamp is on and installed. 45° tilt, 350° rotation. Keyed installation of the adjustable cartridge ensures correct alignment after maintenance. Luminaire is standard with a clear safety glass. IP44 as standard. White standard finish. Black available to order. Overall diameter 100mm Aperture diameter 90mm Ceiling cut out 102mm Maximum height 125mm Luminaire can accept an additional 2 accessories. To be specified separately. Specify lamp wattage and beam angle separately. Control gear to be specified separately. Fixture Orientation Lamp Trim Colour 1020.02 adjustable MR16 (low voltage) White as standard CMH- Metal halide Other colour available MR50 LED Ref Number: 1020.02/lamp Lamp MR16(low voltage) or metal halide or LED Lamp holder GU5.3or GX10 or LED Lamp wattage 20-50w/20-35w or 8-18w 42 Duluce reserve the right to change product specification without notice info@duluce.co.uk | www.duluce.co.uk Prospex plus round wall wash plaster in Recessed round wall wash downlight with one piece die cast wall wash front plate for trimless installation. Easy to install with separate plaster-in installation kit and wall wash front plate. Internal reflector and linear spread lens for even illumination both horizontally and vertically. Components installed with ball-catches. IP44 as standard. White standard finish. Black available to order. Overall diameter 100mm Ceiling cut out 102mm Maximum height 115mm Specify lamp wattage and beam angle separately. Control gear to be specified separately. Fixture Orientation Lamp Trim Colour 1020.03 Fixed MR16 (low voltage) White as standard CMH metal halide Other colours available MR50 LED Ref Number: 1020.03/lamp Lamp MR16 (low voltage) or metal halide or LED Lamp holder GU5.3 or GX10 or LED Lamp wattage 20-50w or 20-35w or 8-18w Duluce reserve the right to change product specification without notice info@duluce.co.uk | www.duluce.co.uk 43 Prospex plus square flat fix plaster in Recessed square fixed downlight with one piece die cast flat front plate for trimless. Easy to install with separate plaster-in installation kit and flat front plate. Components installed with ball-catches. Luminaire is standard with a clear safety glass. IP44 as standard. White standard finish. Black available to order. Overall dimension 100 x 100mm Aperture dimension 55 x 55mm Ceiling cut out 102 x 102mm Maximum height 100mm Luminaire can accept an additional 2 accessories. To be specified separately. Specify lamp wattage and beam angle separately. Control gear to be specified separately. Fixture Orientation Lamp Trim Colour 1018.04 Fixed 16 - MR16 (low voltage) White as standard CMH Metal Halide Other colours available MR50 LED Ref Number: 1018.04/lamp Lamp MR16(low voltage) or metal halide or LED Lamp holder GU5.3 or GX10 or LED Lamp wattage 20-50w or 20-35w or 8-18w 44 Duluce reserve the right to change product specification without notice info@duluce.co.uk | www.duluce.co.uk Prospex plus square flat adj plaster in Recessed square adjustable downlight with one piece die cast flat front plate for trimless installation. Easy to install with separate plaster-in installation kit, adjustable cartridge and flat front plate. Components installed with ball-catches. Hot aiming, allows focusing while the lamp is on and installed. 45° tilt, 360° rotation. Keyed installation of the adjustable cartridge ensures correct alignment after maintenance. Luminaire is standard with a clear safety glass. IP44 as standard. White standard finish. Black available to order. Overall dimension 100 x 100mm Aperture dimension 55 x 55mm Ceiling cut out 102 x 102mm Maximum height 115mm Luminaire can accept an additional 2 accessories. To be specified separately. Specify lamp wattage and beam angle separately. Control gear to be specified separately. Fixture Orientation Lamp Colour 1018.05 Adjustable 16 - MR16 (low voltage) White as standard CMH metal halide Other colours available MR50 LED Ref Number: 1018.05 Lamp MR16(low voltage) or metal halide or LED Lamp holder GU5.3 or GX10 or LED Lamp wattage 20-50w or 20-35w or 8-18w Duluce reserve the right to change product specification without notice info@duluce.co.uk | www.duluce.co.uk 45 Prospex plus square pyramidal fix plaster in Recessed square fixed downlight with one piece die cast pyramidal front plate for trimless installation. Easy to install with separate plaster-in installation kit and pyramidal front plate. Components installed with ball-catches. Luminaire is standard with a clear safety glass. IP44 as standard. White standard finish. Black available to order. Overall dimension 100 x 100mm Aperture dimension 90 x 90mm Ceiling cut out 102 x 102mm Maximum height 110mm Luminaire can accept an additional 2 accessories. To be specified separately. Specify lamp wattage and beam angle separately. Control gear to be specified separately. Fixture Orientation lamp Trim Colour 1018.01 Fixed MR16 (low voltage) White as standard CMH metal halide Other colours available MR50 LED Ref Number: 1018.01/lamp Lamp MR16(low voltage) or metal halide or LED Lamp holder GU5.3or GX10 or LED Lamp wattage 20-50w or 20-35w or 8-18w 46 Duluce reserve the right to change product specification without notice info@duluce.co.uk | www.duluce.co.uk Prospex plus square pyramidal adj plaster in Recessed square adjustable downlight with one piece die cast pyramidal front plate for trimless installation. Easy to install with separate plaster-in installation kit, adjustable cartridge and pyramidal front plate. Components installed with ball-catches. Hot aiming, allows focusing while the lamp is on and installed 45° tilt, 350° rotation Keyed installation of the adjustable cartridge ensures correct alignment after maintenance. Luminaire is standard with a clear safety glass. IP44 as standard. White standard finish. Black available to order. Overall dimension 100 x 100mm Aperture dimension 90 x 90mm Ceiling cut out 102 x 102mm Maximum height 125mm Luminaire can accept an additional 2 accessories. To be specified separately. Specify lamp wattage and beam angle separately. Control gear to be specified separately. Fixture Orientation Lamp Trim Colour 1018.02 Adjustable 16 - MR16 (low voltage) White as standard CMH metal halide Other colours available MR50 LED Ref Number: 1018.02/lamp Lamp MR16 (low voltage) or metal halide or LED Lamp holder GU5.3 or GX10 or LED Lamp wattage 20-50w or 20-35w or 8-18w Duluce reserve the right to change product specification without notice info@duluce.co.uk | www.duluce.co.uk 47 Prospex plus square wall wash plaster in Recessed square wall wash downlight with one piece die cast wallwash front plate for trimless installation Easy to install with separate plaster-in installation kit and wall wash front plate. Internal reflector and linear spread lens for even illumination both horizontally and vertically. Components installed with ball-catches. IP44 as standard. White standard finish. Black available to order. Overall dimension 100 x 100mm Ceiling cut out 102 x 102mm Maximum height 115mm Luminaire can accept an additional 2 accessories. To be specified separately. Specify lamp wattage and beam angle separately. Control gear to be specified separately. Fixture Orientation Lamp Colour 1018.03 Fixed MR16 (low voltage) White as standard CMH Metal Halide Other colours available MR50 LED Ref Number: 1018.03 Lamp MR16(low voltage) or metal halide or LED Lamp holder GU5.3 or GX10 or LED Lamp wattage 20-50w or 20-35w or 8-18w 48 Duluce reserve the right to change product specification without notice info@duluce.co.uk | www.duluce.co.uk Box Mini 1 way trimless Trimless directional single gimbal luminaire. Trimless version with plaster frame. 45° stop on both directions. Anti glare snoot as standard. Front loading louvres, glass colour filters and lenses Specify colour for gimbals (XX), Housing (YY) and Plaster Trim (ZZ) Colours available black (BK) or white (WH) Overall 101 x 101mm Ceiling cut out 108 x 108mm Maximum height 150mm MR50-LED to be specified separately Maximum 12w per element for LED Fixture Lamp 1009min TL MR16 (low voltage) MH - CMH/MR16 (Metal Halide) Mounting TL Trimless LED- MR50-LED Ref Number: Lamp Lamp holder Lamp wattage Gimbal Colour Housing Colour Trim Colour WH - White WH - White WH - White BK - Black BK - Black BK - Black SA Special SA - Special SA Special 1009minTL/lamp /XX-YY-ZZ MR16 (low voltage)or CMH/MR16 or MR50-LED CBC-51 or GX10 or LED CBC-51 or GX10 or LED Duluce reserve the right to change product specification without notice info@duluce.co.uk | www.duluce.co.uk 49 Box Mini 2 way trimless Trimless directional twin lamp gimbal luminaire. Trimless version with plaster frame. 45° stop on both directions. Anti glare snoot as standard. Front loading louvres, glass colour filters and lenses Specify colour for gimbals (XX), Housing (YY) and Plaster Trim (ZZ) Colours available black (BK) or white (WH) Overall 228 x 101mm Ceiling cut out 235 x 108mm Maximum height 150mm MR50-LED to be specified separately Maximum 12w LED per item Fixture Lamp 1010min TL 16 - MR16 (low voltage) MH - CMH/MR16 (Metal Halide) Mounting TL Trimless LED Box Colour Gimbal Colour Trim Colour WH - White WH - White WH - White BK - Black BK - Black BK - Black SA Special SA - Special SA Special Ref Number: 1010minTL/lamp/-XX-YY-ZZ Lamp M16(low voltage) or metal halide or LED Lamp holder cbc 51or GX10 or LED Lamp wattage 20-50 or 20-35w or 8-12w 50 Duluce reserve the right to change product specification without notice info@duluce.co.uk | www.duluce.co.uk Box Mini 3 way trimless Trimless directional three lamp gimbal luminaire. Trimless version with plaster frame. 45° stop on both directions. Anti glare snoot as standard. Front loading louvres, glass colour filters and lenses Specify colour for gimbals (XX), Housing (YY) and Plaster Trim (ZZ) Colours available black (BK) or white (WH) Overall 328 x 101mm Ceiling cut out 335 x 108mm Maximum height 150mm Mini Box for 3 x MR50 LED, white Gimbal, Black Housing & White MR50-LED to specified separately Max wattage 12w per item Fixture Lamp 1011min TL MR16 (low voltage) MH - CMH/MR16 (Metal Halide) Mounting TL Trimless MR50 LED Box Colour Gimbal Colour Trim Colour WH - White WH - White WH - White BK - Black BK - Black BK - Black SA Special SA - Special SA Special Ref Number: 1011minTL/lamp/-XX-YY-ZZ Lamp M16 low voltage) or metal halide or LED Lamp holder cbc 51 or GX10 or LED Lamp wattage 20-50w or 20-35w or 8-12w Duluce reserve the right to change product specification without notice info@duluce.co.uk | www.duluce.co.uk 51 Ceiling and wall 52 info@duluce.co.uk | www.duluce.co.uk ERF P The Erf Pendant is hewn from solid aluminium and is a small sized pendant ideal for highlighting dining tables reception desks or meeting tables. It would also be suited for clustering into larger arrangements. The natural aesthetic of the product is enhanced by the finish, variable as polished aluminium, anodized or shot blasted then anodized. -Machined aluminium body -Anodized, shot blasted or polished finish. -Small scale 77mm height -Low energy high efficiency LED inside -coloured cable options -Different beam angles available -LED replacement available -Flat plate discreet ceiling rose for ceiling fixing -Remote LED driver with dimmable options Finish options Shot blasted natural/black anodized/polished/natural anodized/blue anodized Other finishes available upon request minimum orders apply. Duluce reserve the right to change product specification without notice info@duluce.co.uk | www.duluce.co.uk 53 Technical data -Forward voltage- 9v -Cree MTG-2 LED -Maximum drive current 350ma -Remote mounted driver -Beam angles 17, 36 and 50 degree -70% lumen maintenance at 50000 hours( 350ma version) -Dimmable driver options 1-10v, DALI -Lumen output 350 lumens at 3000k -6w power consumption -Colour temperature, 2700, 3000k.Other colours on request Pendant Finish LED colour Cable colour Beam angle P1 SAN-shot blast anodize natural SAG-shot blast anodize grey SAB- shot blast anodize black P- Polished natural AN- Anodize natural AG-Anodize grey AB-Anodize black 30-3000k 27-2700k TR- transparent OR-Orange BL-Royal blue TE-Teal BL-Black Narrow- 17 degree Medium – 35 degree Wide- 50 degree Beam options (guide only) 17 degree, (as shown above) 35 degree 50 degree 54 info@duluce.co.uk | www.duluce.co.uk Ringo Duluce reserve the right to change product specification without notice info@duluce.co.uk | www.duluce.co.uk 55 Basic 56 Duluce reserve the right to change product specification without notice info@duluce.co.uk | www.duluce.co.uk Duluce reserve the right to change product specification without notice info@duluce.co.uk | www.duluce.co.uk 57 Roam Surface mounted LED spotlight 355 degree rotation 90 degree tilt Machined from aluminium Powder coated finish Special finishes available upon request Narrow, medium and wide beam Remote driver with dimmable options Deep set LED for low glare Honeycomb and glass filter accessories 10w available as standard Technical data 600 lumen output approx. 61 lumens per watt system approx. 3000-4000k colour temperature CRI 80+ as standard. Drive current 200ma remote Forward voltage 36v Dali or analogue dimming Special finishes available upon request 70% light output at 40,000 hours 17 degree 35 degree 58 Duluce reserve the right to change product specification without notice 50 degree info@duluce.co.uk | www.duluce.co.uk Performance data- inclusive of driver, module and reflector 3000k 200ma version -10w – module efficacy 60-61 lumens p/watt * Photometric data online Beam width 17 35 50 Lumens 611 606 600 Product detail Product Finish LED colour Beam angle Dimming Roam Powder coat –white Powder coat -black Special finish-SP 30-3000k 40-4000k Na-17 degree M- 35 degree Wi-50 degree DALI- Dali dimming 1-10V analogue dimming info@duluce.co.uk | www.duluce.co.uk 59 Inground 60 Duluce reserve the right to change product specification without notice info@duluce.co.uk | www.duluce.co.uk Duluce reserve the right to change product specification without notice info@duluce.co.uk | www.duluce.co.uk 61 62 Duluce reserve the right to change product specification without notice info@duluce.co.uk | www.duluce.co.uk Duluce reserve the right to change product specification without notice info@duluce.co.uk | www.duluce.co.uk 63 64 Duluce reserve the right to change product specification without notice info@duluce.co.uk | www.duluce.co.uk Module 1 Duluce reserve the right to change product specification without notice info@duluce.co.uk | www.duluce.co.uk 65 Module 2 66 Duluce reserve the right to change product specification without notice info@duluce.co.uk | www.duluce.co.uk Module 4 Duluce reserve the right to change product specification without notice info@duluce.co.uk | www.duluce.co.uk 67 Exterior lighting Modux 2 and 4 Accessories 68 Duluce reserve the right to change product specification without notice info@duluce.co.uk | www.duluce.co.uk Duluce reserve the right to change product specification without notice info@duluce.co.uk | www.duluce.co.uk Duluce Suite 2, 2nd floor 60 Green Road LEEDS LS6 4JP 0845-200-1300 www.duluce.co.uk info@duluce.co.uk