XVIIth International Conference on Electrical Machines, Chania, Crete Island, Greece, September 2 – 5, 2006
Activities Schedule
Monday, September 4th, 2006
Saturday, September 2nd, 2006
08:00-09:00
09:00-10:00
Registration
Plenary Oral Session OSK2
Tuesday, September 5th, 2006
08:00-09:00
09:00-10:00
Keynote presentation on traction motors
11:00-13:30
Registration
10:00-10:20
10:20-11:30
Coffee Break
Poster Sessions PMM
Keynote presentation on generators for WT
10:00-10:20
10:20-11:30
PMM1: Permanent Magnet Machines
PMM2: Drives of Induction Machines
PMM3: Design of Electric Machines and
Teaching
PMM4: Testing, Measurements, Acoustic Noise
and Vibration Aspects
11:40-13:20
Oral Sessions OMM
Opening Ceremony
Plenary Oral Session OSK1
13:20-1430
14:30-15:40
Keynote presentation on power transformers
15:10-15:30
15:30-16:40
Coffee Break
Poster Sessions PSA
11:40-13:20
15:40-16:00
16:00-17:40
20:00-22:00
Coffee Break
Oral Sessions OMA
13:20-1430
14:30-15:40
15:40-16:00
16:00-17:40
Departure from Minoa Palace Hotel for the
Official Dinner
Sunday, September 3rd, 2006
Registration
07:00-07:45
Departure from Minoa Palace Hotel for the
08:00
One Day Cultural Visit to Knossos
Archaelogical Site
1/34
Coffee Break
Oral Sessions OTA
OTA1: Power Generation by Renewable Sources
OTA2: Variable Reluctance Machines
OTA3: Theory, Modeling and Simulation
OTA4: Losses, Thermal Phenomena and Cooling
17:50-18:20
19:30
Lunch
Poster Sessions PTA
PTA1: Power Generation by Renewable Sources
- Flywheels
PTA2: Variable Reluctance Machines
PTA3: Theory, Modeling and Simulation
PTA4: Monitoring and Diagnostics
PTA5: Thermal Phenomena and Cooling
OMA1: Monitoring and Diagnostics
OMA2: Drives of Variable Reluctance
Machines
OMA3: Electric Vehicles and Power Electronics
OMM4: DC Machines and Actuators
Oral Sessions OSA
OSA1: Permanent Magnet Machines
OSA2: Synchronous Machines
OSA3: Induction Machines
OSA4: Special Machines
Welcome Reception at Minoa Palace Hotel
Oral Sessions OTM
OTM1: Power Generation by Renewable Sources
OTM2: Drives of Synchronous Machines
OTM3: Transformers
OTM4: Testing, Measurements, Acoustic Noise
and Vibration Aspects
PMA1: Permanent Magnet Machines
PMA2: Drives of Variable Reluctance Machines
and Particular Control Techniques
PMA3: Induction Machines
PMA4: DC Machines and Actuators
PMA5: Materials and Losses
PSA1: Permanent Magnet Machines
PSA2: Synchronous Machines
PSA3: Induction Machines
PSA4: Special Machines
PSA5: Superconducting Machines
16:50-18:30
Lunch
Poster Sessions PMA
Coffee Break
Poster Sessions PTM
PTM1: Power Generation by Renewable Sources
PTM2: Drives of Synchronous, PM and DC
Machines
PTM3: Transformers and Inductors
PTM4: Electric Vehicles and Power Electronics
OMM1: Permanent Magnet Machines
OMM2: Drives of Induction Machines
OMM3: Design of Electric Machines
OMM4: Teaching
13:30-14:10
14:10-15:10
Registration
Plenary Oral Session OSK3
Closing Ceremony
XVII International Conference on Electrical Machines
Minoa Palace Hotel, Chania, Crete Island, Greece, September 2 – 5, 2006
Web-site: http://www.ntua.gr/ICEM2006/
Saturday, September 2nd 2006
11:00-13:30 : Registration
13:30-14:10 : OPENING CEREMONY (Athina1 Room)
14:10-15:10 : PLENARY ORAL SESSION OSK1 (Athina1 Room)
Keynote presentation by D. Spiliopoulos, (Schneider Electric SA) Greece, on description of
activities of the company and on “Recent advances on power transformers”
15:10-15:30 Coffee Break
15:30-16:40 POSTER (DIALOGUE) SESSION PSA1: PERMANENT MAGNET
MACHINES
Saturday, September 2nd 2006
No
Ref
PSA1-1
141
PSA1-2
313
PSA1-3
163
PSA1-4
180
PSA1-5
234
PSA1-6
244
Paper title
Authors
A Permanent Magnet Generator for Small Scale
Wind Turbines
A Method for Dynamic Analysis of an Interior
Permanent Magnet Motor Based on Nonlinear
Magnetic Circuit
High-speed permanent magnet generators design
and testing
An Attempt to Extend the Flux Weakening Range of
a Single Stator Dual Rotor PM Machine
Numerical design of DC brush motor with rareearth magnets for ABS system including
tolerances of input parameters
A Stator Turn Fault Tolerant Strategy for Interior PM
Synchronous Motor Drives in Safety Critical
Applications
PSA1-7
245
PSA1-8
249
PSA1-9
250
Comparative Evaluation of Axial Flux versus Radial
Flux Permanent Magnet Synchronous Machines
Design and Implementation of a Tubular Brushless
DC Motor for Direct-Drive Applications
Design of Interior Permanent Magnet Motors for
Smoothening Back-EMF Waveform
251
Development of the Discontinuous Primary
Permanent Magnet Linear Synchronous Motor
PSA1-10
PSA1-11
254
PSA1-12
266
PSA1-13
267
PSA1-14
274
PSA1-15
276
PSA1-16
311
PSA1-17
312
PSA1-18
346
PSA1-20
284
Optimised design of concentrated winding PM
brushless motors
Evaluation of Eddy Current Loss in Tubular
Permanent Magnet Motors by Three-Dimensional
Finite Element Analysis
Magnetic Field Distribution in Brushless Permanent
Magnet AC Motors with Interior Permanent
Magnets (IPM) and Slotted Stator
A Brushless Permanent Magnet Motor with Hybrid
Windings
Torque ripple reduction design of Multi-layer Interior
Permanent Magnet Synchronour Motor by using
Response Surface Methodology
Reluctance Network Analysis Model of a Permanent
Magnet Generator Considering an Overhang
Structure
Multipolar Reluctance Generator Using Stator Core
with Permanent Magnet
Distribution, coil-span and winding factors for AFPM
with concentrated windings
Application of a Toroidal Harmonic Expansion for
Computing the Magnetic Field from a Balanced 6Pole Permanent-Magnet Motor
2/34
J.R. Bumby, N. Stannard and R.
Martin
K. Nakamura, M. Ishihara, and
O. Ichinokura
Country of the
corresponding
author
UK
Japan
Russia
Yanush Danilevich, Victor Antipov
Imen Abdennadher, Ahmed
Masmoudi and Ahmed Elantably
Tunisia
G. Ombach, J. Junak and A. Ackva
Germany
Youngkook Lee, Hyung-Bin Ihm, TaeHoon Lee and T.G. Habetler
M. Krishnamurthy, B. Fahimi and K.
D. Oglesby
USA
USA
S.H. Mao, B.J. Lin, and M.C. Tsai
Taiwan
H.S. Chen and M.C. Tsai
Kenji Suzuki, Yong-Jae Kim, Masaya
Watada and Hideo Dohmeki
A. Castagnini, P. Faure Ragani, G.
Secondo
Taiwan
J. Chai, J. Wang and D. Howe
Japan
Italy
UK
F. Poltschak, W.Amrhein
Austria
L. Y. Hsu and M. C. Tsai
Taiwan
Liang Fang, Soon-O Kwon, Peng
Zhang, Jung-Pyo Hong
K. Nakamura, M. Ishihara, and O.
Ichinokura
O. Ichinokura, T. Ono, T. Tashiro, K.
Nakamura, and A. Takahashi
S. E. Skaar, Ø. Krøvel
J. Selvaggi, S. Salon, O. Kwon, and
M.V.K. Chari
China
Japan
Japan
Norway
USA
XVII International Conference on Electrical Machines
Minoa Palace Hotel, Chania, Crete Island, Greece, September 2 – 5, 2006
Web-site: http://www.ntua.gr/ICEM2006/
15:30-16:40 POSTER (DIALOGUE) SESSION PSA2: SYNCHRONOUS
MACHINES
Saturday, September 2nd 2006
No
Ref
PSA2-1
135
PSA2-2
188
PSA2-3
213
PSA2-4
214
New Approach to Identification of Turbogenerator
Rotor Quantities
About Currents from the Damping Winding Bars of
Three-phase Synchronous Generator Connected
on Rectifier
Time-stepping FEM Based Modeling of a
Synchronous Generator connected to infinite bus
via a Delta-star Transformer
The Analysis and Validation of Saturation Curve
Series of Synchronous Generators
217
Half-order modelling of turboalternators - An
adapted method of parameter identification
221
Computation of Forces and Stresses in the Winding
Overhang of Large Hydrogenerators at Faulty
Conditions
PSA2-5
PSA2-6
Paper title
Authors
PSA2-7
229
PSA2-8
233
PSA2-9
247
PSA2-11
293
PSA2-12
294
PSA2-13
329
On the Identification of the Synchronous Machine
Parameters Using Standstill DC Decay Test
A Comprehensive Algorithm for the estimation of
Synchronous Generator Parameters
Damping Shaft Torsional Oscillation of
Synchronous Generator by Fuzzy Logic-Controlled
SMES
Special consideration in On-line Partial Discharge
(PD) Monitoring for Stator Insulation Condition
Assessment of Large Steam-Turbo Generators
Stochastic Evaluation of Turbine-Generator Shaft
Torsional Torques in a Six-Phase Power System
Design of A Steam-resistant Insulation System for
the Stator of A Low-voltage Turbo-Generator
PSA2-14
338
Numerical Modelling of Large Solid Pole
Synchronous Motors
372
A Method of Eddy Current Calculation for Stator
Core Ends of Turbine Generators
PSA2-15
PSA2-16
383
PSA2-17
408
PSA2-18
437
PSA2-19
486
PSA2-20
PSA2-21
492
497
PSA2-22
498
PSA2-23
508
PSA2-24
PSA2-25
436
604
PSA2-26
639
PSA2-27
685
PSA2-28
687
PSA2-29
691
The Nonlinear Characteristics of Turbo-generator
under Abnormal Operating Conditions
Pulsating torques during starting of synchronous
motors: Implementation and comparative analysis
of different measurement methods
On the Design of a Remote Intelligent Excitation
Controller for a Synchronous Generator
The influence of magnetic saturation towards the
induced voltage for homopolar synchronous
generator
Analysis of Unbalanced Magnetic Pull in TrainLighting Brushless Alternators with Skewed Rotor
under Static Eccentricity and Conical Rotor Motion
Rotor monitoring tool for turbogenerators
Permeance network method coupling with
experimental design in order to optimize turboalternators
Line-Switching Test Based Practical Approach for
Identification of Synchronous Machine Parameters
Behavior of Syncronous Generators with Rotor
Excentricity Evaluated by the Polarization Fixed
Point Method
Limits of turbine generator’s underexcited operation
Surface currents in solid poles of large
synchronous machines at direct start
Magnetic Unbalance in a Hydrogenerator's rotor
and its effects on the Synchronous machine
Steady-State Performance of a Hybrid Excitation
Single-Phase Synchronous Generator
A BAS application of a Series Magnetized
Synchronous Machine
3/34
G. Rogozin, N. Pjatlina
C. Nica, S. Enache, M. A. Enache
Country of the
corresponding
author
Ukraine
Romania
Luo Ying-li, Zhang Xinli Meng Liang
China
Zhang Xinli, Luo Yingli, Liu Xiaofang
S. Racewicz, D. Riu, N. Retiere, P.
Chrzan
Georg Traxler-Samek, Axel Fuerst,
Alexander Schwery and Carlos
Ramirez
L. Vicol, M. Tu Xuan, J.-J. Simond,
I.A. Viorel
China
Poland
Switzerland
Switzerland
Elias Kyriakides
Cyprus
Mohd. Hasan Ali, Toshiaki Murata,
and Junji Tamura
Japan
E. Sharifi, S. Amini, K. Rahmani
Iran
S.O. Faried and S. Aboreshaid
Canada
V. Sihvo, J. Pyrhönen
Ling Luo, Chunting Mi, Haran
Karmaker, Peter Zong and George
Gao
Katsumi Yamazaki and Yuta
Watanabe
Kang Jinping, Luo Yingli, Wang Jing,
Liu Xiaofang, MengLiang
Finland
Christer Danielsson, Holger Persson
Yannis L. Karnavas, Nicolaos P.
Polyzos, Demetrios P. Papadopoulos
Sweden
Sorin Deaconu, Lucian Tutelea,
Gabriel N. Popa, Iosif Popa
K.P.P. Pillai, Achuthsankar S. Nair,
G.R. Bindu
E. Guillot
Dmitry Petrichenko, Michel Hecquet,
Pascal Brochet, Vyacheslav
Kuznetsov, Daniel Laloy
USA
Japan
China
Greece
Romania
India
France
France
R. Wamkeue, J. Christian, I. Kamwa
Canada
I.R.Ciric, F.Hantila, M.Maricaru, and
S.Marinescu
Z. Maljkovic, M. Pavlica
Romania
Croatia
Yujing Liu, Holger Persson
Sweden
A. Millan, A. Romero
Nobuyuki Naoe, Tadashi Fukami,
Akiyuki Minamide, Kazuya Takemata
D. Hagstedt, M. Alakula, T. Bergh
Venezuela
Japan
Sweden
XVII International Conference on Electrical Machines
Minoa Palace Hotel, Chania, Crete Island, Greece, September 2 – 5, 2006
Web-site: http://www.ntua.gr/ICEM2006/
15:30-16:40 POSTER (DIALOGUE) SESSION PSA3: INDUCTION MACHINES
Saturday, September 2nd 2006
No
Ref
Paper title
Authors
PSA3-1
584
PSA3-2
119
Radial forces and torque ripples in split-phase
induction motors
A Complete Induction Motor Model for Low and
High Frequency Analysis
202
A New Posibility for the Determination of the
Induction Machines Parameters
203
Influence of Magnetic Saturation on Induction
Motor Model Selection
PSA3-3
PSA3-4
PSA3-5
246
PSA3-6
252
A Comparison of 3D Models for Determining Skin
Effect in Induction Motor End Rings
The Comparison Study of Different Models Used
for Calculation of the Transient Processes of an
Induction Motor During Frequency and Soft Starting
269
Energy Efficiency of small Induction Machines:
Comparison between Motor and Generator Mode
279
Electromagnetic Excitation Forces in Small
Induction Motors
PSA3-7
PSA3-8
PSA3-9
289
PSA3-10
298
Analysis of Induction Motor Static Eccentricity using
Time Stepping Finite Element
Using Improved Winding Function Theory and 2D
Finite Element Method to Model Air-Gap
Eccentricity in Induction Motors
326
Detailed Transient Analysis of Self Excited
Induction Generator Feeding Induction Motor
PSA3-11
PSA3-12
358
PSA3-13
365
Die-cast Copper Rotor Motors via Simple
Substitution and Motor Redesign for Copper
The complete electrical supply characterization of
an induction motor that operates under a given
NEMA unbalance
PSA3-14
384
PSA3-15
390
PSA3-16
391
The Influence of Stochastic Properties on the Motor
Parameters of an Induction Machine
Optimization-Based Steady State Analysis of
Parallel-Operated Three Phase Induction
Generators and Motors
Steady-State Analysis of a Mixed Faults Threephase Squirrel-cage Induction Motor using Time
Stepping Finite Element Method
PSA3-17
393
FE Torque Analysis of a Shaded-Pole Motor
PSA3-18
453
PSA3-19
458
Stator-Tooth Optimization of an Induction Machine
with Squirrel-Cage Rotor
Behaviour Analysis of Induction Machine Under
Broken Bars and Distorted Voltage Input
PSA3-20
463
PSA3-21
200
Insulation Aging in AC motors due to mechanical
stresses
Parallel Scheme for Estimation of Rotor Position
and Stator Resistance in Sensorless Speed Control
of a Doubly Fed Induction Machine
196
The influence of the frame and windings on the
natural frequencies of stator of induction motors
104
A solid rotor induction machine for turbo-assist
operation
PSA3-22
PSA3-23
4/34
Lieven Vandevelde, Claus B.
Rasmussen and Jan A. A.
Melkebeek
A. Boglietti, A. Cavagnino
S. Enache, A. Campeanu, I. Vlad, M.
A. Enache
Marko Hinkkanen, Anna-Kaisa Repo,
Jorma Luomi
C. del Perugia, R.D. Findlay, N.
Stranges
Maria Dems, Krzysztof Komeza
Wim Deprez, Annick Dexters, Johan
Driesen, Ronnie Belmans
Y. Yoshikuwa, A. Imagi, H. Kometani
and J. Okada
M.B.B. Sharifian, J. Faiz, B.M.
Ebrahimi
E. Khosrowshahli, E. Sharifi
Ghazvini, S. Shamloo
Mehmet Akbaba, Amin M. Sultan,
Ebrahim Al-Gallaf
R. Kimmich, M. Doppelbauer, D.T.
Peters, J.G. Cowie, E.F. Brush
L. F. Mantilla, M. A. Rodríguez
C. Bastiaensen, W. Deprez, S.
Stevens, J. Driesen
Alolah and Alkanhal
B.M. Ebrahimi, J. Faiz and M.B.B.
Sharifian
L. Petkovska, G. Cvetkovski, V.
Sarac
C. Schlensok, S. Felgentrager, D.
van Riesen, K. Hameyer
J. Kappatou, A. Safacas
J-Ph. Lecointe, S. Duchesne, R.
Romary, J-F. Brudny, P. Schlupp
R. Ghosn, M. Pietrzak-David and B.
de Fornel
S. L. Nau, B. C. Bork, H. L. V. dos
Santos, N. Sadowski and R. Carlson
J.R. Bumby, E Spooner and M.
Jagiela
Country of the
corresponding
author
Belgium
Italy
Romania
Finland
Canada
Poland
Belgium
Japan
Iran
Iran
Bahrain
Germany
Spain
Belgium
Saudi Arabia
Iran
FYROM
Germany
Greece
France
Lebanon
Brazil
UK
XVII International Conference on Electrical Machines
Minoa Palace Hotel, Chania, Crete Island, Greece, September 2 – 5, 2006
Web-site: http://www.ntua.gr/ICEM2006/
15:30-16:40 POSTER (DIALOGUE) SESSION PSA4: SPECIAL MACHINES
Saturday, September 2nd 2006
No
PSA4-1
Ref
Paper title
130
Revisiting the MMF Analysis of Asymmetrical TwoPhase Induction Motors
A New Hybrid Brushless dc Motor without
Permanent Magnet
Modeling Techniques for Hybrid Excited Doubly
Salient Motor with Rotor Skewing
A New Claw Pole Synchronous Machine with DC
Excitation in the Stator:a Comparison with the
Conventional Claw Pole Alternator
Magnetic Anisotropy considered for Synchronous
Claw-Pole Alternators with Axial Flux Component
Model to Evaluate the Influence of the Winding
Data on the Brush Wear in Universal Motors
PSA4-2
169
PSA4-3
175
PSA4-4
191
PSA4-5
193
PSA4-6
207
PSA4-7
PSA4-8
211
264
PSA4-9
361
Electrostatic Hysteresis Motor
Some types of unconventional electromechanical
energy converters: application and classification
404
2D-FEM Modeling of an Axial-Flux Solid-Rotor
Induction Motor
PSA4-10
PSA4-11
412
PSA4-12
421
PSA4-13
PSA4-14
439
531
PSA4-15
578
Performance of a Dual-Winding Reluctance
Generator With Multiple-Barrier Rotor
Clawpole Transverse-Flux Machine with Hybrid
Stator
Light Structures for Low-Speed Multi-Pole
Machines for Direct-Drive Applications
Rotor Design and Performance for a BDFM
Limits and Advantages of Scaling as a Fast
Procedure for Designing Transverse Flux Motors
Developement of Tubular Type Linear Generator
for Free-Piston Engine
PSA4-16
581
PSA4-17
589
PSA4-18
606
Brushless DC Motor with Frequency Generator
Substituted for Position Sensor
Comparative Study on the equivalent circuit of the
electric motor and traveling wave piezoelectric
ultrasonic motor
High torque motor (vernier reluctance magnet
machine) for specific systems
647
Performance Comparison of Three and Four-Phase
Linear Tubular Stepping Motors
PSA4-19
5/34
Authors
Country of the
corresponding
author
L. M. de Castro Neto, J. R.
Camacho, H. R. de Azevedo, S. C.
Guimaraes, C. H. Salerno
E. Afjei, M.M. Nezamabadi and M.A.
Saati
Brazil
Xiaoyong Zhu, Ming Cheng
China
Iran
H. Aloui, A. Masmoudi, M. Lecrivain
and M. Gabsi
Tunisia
S. Schulte, F. Henrotte, K. Hameyer
Germany
A. Di Gerlando, R. Perini
Tadashi Fukami, Masatoshi
Momiyama, Kazuo Shima, Ryoichi
Hanaoka, and Shinzo Takata
M. Crivii and M. Jufer
I. Shvedchikova
M. Valtonen, A. Parviainen and J.
Pyrhönen,
M. R. Dubois, H. Polinder, D.
Massicotte
P.J.Tavner, E. Spooner
P J Tavner, R A McMahon, P
Roberts, E Abdi-Jalebi, X Wang
Kang D H, Chang J H, Viorel I -A,
Viorel Alina Cristina, Strete Larisa
Jaewon Lim, Ho-Yong Choi, Sun-Ki
Hong, Dong-Hyeok Cho and HyunKyo Jung
Hiro Takano, Mikihiro Kishio, Hideaki
Nanko
Mircea Ignat, George Zarnescu
Ph. Enrici, J. Jac, N. Ziegler, D. Matt
W. Missaoui, L. El Amraoui Ouni, F.
Gillon, M. Benrejeb, P. Brochet
Italy
Japan
Switzerland
Ukraine
Finland
Canada
UK
UK
Korea
Korea
Japan
Romania
France
France
XVII International Conference on Electrical Machines
Minoa Palace Hotel, Chania, Crete Island, Greece, September 2 – 5, 2006
Web-site: http://www.ntua.gr/ICEM2006/
15:30-16:40 POSTER (DIALOGUE) SESSION PSA5: SUPERCONDUCTING
MACHINES
Saturday, September 2nd 2006
No
Ref
Paper title
Authors
PSA5-1
348
Development of Synchronous Alternator with HTSC
Armature
PSA5-2
347
Development of Three-Phase Transformer with
HTSC Windings and Amorphous Alloy Cores
PSA5-3
544
PSA5-4
610
Introducing complex engineering approach into
curricula by superconductivity
Design of permanent motors/generators for energy
storage flywheels with Superconducting magnetic
bearings
PSA5-5
633
Nondestructive evaluation of electrical machines
using superconductor windings
PSA5-6
744
HTS HIA Generator and Motor for Marine
Applications
E.N. Andreev, L.I. Chubraeva, M.V.
Manzuk, M.Yu. Platonova, S.S.
Timofeyev
E.N. Andreev, L.I. Chubraeva, D.A.
Korotkov, M.Yu. Platonova, D.A.
Volkov
I. Vajda, L. Farkas, S. C. Kashyap, D.
K. Pandya
Z.Kohari
Raimond Grimberg, Adriana Savin,
Rozina Steigmann, Sorin Leitoiu,
Alina Bruma
K. Sivasubramaniam, E.T. Laskaris,
M. R. Shah, J. W. Bray, N. R.
Garrigan
Country of the
corresponding
author
Russia
Russia
Hungary
Hungary
Romania
USA
16:50-18:30 ORAL SESSION OSA1: PERMANENT MAGNET MACHINES
Saturday, September 2nd 2006
Athina1 Room
No
Ref
OSA1-1
235
Electromagnetic Design Analysis of Tooth Coil,
Voltage Regulated, PM Synchronous Generators
156
Maximum Efficiency Operation of Interior
Permanent Magnet Synchronous Generator Based
on State Space Model
OSA1-2
OSA1-3
352
OSA1-4
426
OSA1-5
457
Paper title
Authors
Analysis of a High Pole Number Motor with
Assymetries Using a Reduced Model
Unbalanced Magnetic Pull in High-Speed
Brushless Permanent Magnet Motors –
Experimental Observations and Results
Magnet Loss Analysis of Permanent-Magnet
Synchronous Motors with concentrated windings
6/34
A. Di Gerlando, G. M. Foglia, R.
Perini, M. Ubaldini
Toshiaki Murata, Kazuhito
Nakamura, Junji Tamura and
Takeshi Tsuchiya
S. J. Salon, O-Mun Kwon, M.V.K.
Chari
U.M. Hoefer, A.G. Jack, B.C. Mecrow
C. Deak, A. Binder, K. Magyari
Country of the
corresponding
author
Italy
Japan
USA
UK
Germany
XVII International Conference on Electrical Machines
Minoa Palace Hotel, Chania, Crete Island, Greece, September 2 – 5, 2006
Web-site: http://www.ntua.gr/ICEM2006/
16:50-18:30 ORAL SESSION OSA2: SYNCHRONOUS MACHINES
Saturday, September 2nd 2006
Athina2 Room
No
Ref
OSA2-1
216
OSA2-2
287
Paper title
Authors
Study on Frequency Characteristics of
Synchronous Generator Damper Circuit
Connection to Weak Electrical Supply Network of
Two Synchronous Machines Operating in Recovery
Regime
OSA2-3
343
OSA2-4
413
Development of High-Temperature
Superconducting Electrical Machines at Siemens
AG
Effect of Voltage Swells on the Transient
Performance of Saturated Synchronous Motors
OSA2-5
562
Simplified 3D-effects modeling for low L/D Aspect
Synchronous Motors
M.Kakiuchi, T.Otaka, S.Nagano,
T.Tokumasu, M.Fujita, K.Nagakura,
J. Shiina, H.Ito, H.Shimada, D.
Hiramatsu, K. Nagasaka
A. Campeanu, Mihai Radulescu,
Marian Badica, Razvan Prejbeanu
Gunar Klaus, Wolfgang Nick, HeinzWerner Neumüller, Georg Nerowski
and William McCown
Ahmed M. El-Serafi, Narayan C. Kar
Di Wu, Haran Karmaker, Peter
Zhong, Colin Sun, Hengfeng Chen,
George Gao
Country of the
corresponding
author
Japan
Romania
Germany
Canada
USA
16:50-18:30 ORAL SESSION OSA3: INDUCTION MACHINES
Saturday, September 2nd 2006
Athina3 Room
No
Ref
Paper title
OSA3-1
345
The Effect of Practical Operating Conditions on the
Performance of Induction Machines
OSA3-2
367
OSA3-3
518
OSA3-4
614
OSA3-5
206
Authors
Cast Copper Induction Motor Inter-bar Resistance
Measurements
Induction Machine Analysis for the Diagnosis of
Rotor Faults Using the Leakage Magnetic Field
Estimating circuit models for a deep-bar Induction
Motor using the harmonic finite element analysis
DTC vs. FOC for an induction machine-based
flywheel energy storage system associated to a
variable-speed wind generator – Experimental
results
7/34
Wim Deprez, Cindy Bastiaensen,
Stijn Stevens, Ronnie Belmans
S. Englebretson, J.L. Kirtley Jr., K.
Molina
Country of the
corresponding
author
Belgium
USA
J. Kappatou, C. Marchand, A. Razek
Greece
A.-K. Repo, A. Niemenmaa, A. Arkkio
Finland
Gabriel Cimuca, Stefan Breban,
Mircea M. Radulescu,Christophe
Saudemont, Benoît Robyns
Romania
XVII International Conference on Electrical Machines
Minoa Palace Hotel, Chania, Crete Island, Greece, September 2 – 5, 2006
Web-site: http://www.ntua.gr/ICEM2006/
16:50-18:30 ORAL SESSION OSA4: SPECIAL MACHINES
Saturday, September 2nd 2006
Ariadne Room
No
Ref
OSA4-1
110
OSA4-2
731
OSA4-3
323
OSA4-4
434
OSA4-5
535
Paper title
Authors
Estimation of the Boundaries for the Claw-pole
Geometry in Electrical Water Pump Applications
An Innovative Axial-Flux Multi-Stack Homopolar
SRM
Numerical Modeling of 3-D Comb Drive
Electrostatic Accelerometers Structure - Field And
Mechanical Models
Soft Magnetic Composite Axial flux seven-phase
machine
Dynamic Characteristics Analysis of 3D Conveyer
System Linear Induction Motor for Control
Algorithm Developments
H. Hembach, D. Gerling, S. Beyer
P. Bolognesi, O. Bruno, L.
Taponecco
Germany
Italy
S. Wiak, K. Smółka
Poland
F. Locment, E.Semail and F. Piriou
France
Su jin Jeon, Sun bum Kwon, and
Jung ho Lee
Korea
20:00-22:00 : Welcome Reception at Minoa Palace Hotel
8/34
Country of the
corresponding
author
XVII International Conference on Electrical Machines
Minoa Palace Hotel, Chania, Crete Island, Greece, September 2 – 5, 2006
Web-site: http://www.ntua.gr/ICEM2006/
Sunday, September 3rd 2006
08:00 : Departure from Minoa Palace Hotel for the One Day Cultural Visit to
Knossos Archaelogical Site
Monday, September 4th 2006
09:00-10:00 : PLENARY ORAL SESSION OSK2 (Athina1 Room)
Keynote presentation by R. Periot, (ALSTOM Transport) France, on description of activities
of the company and on “Traction motors : some technological aspects”
10:00-10:20 Coffee Break
10:20-11:30 POSTER (DIALOGUE) SESSION PMM1: PERMANENT
MAGNET MACHINES
Monday, September 4th 2006
No
Ref
PMM1-1
340
PMM1-2
351
PMM1-3
353
PMM1-4
363
PMM1-5
368
PMM1-6
369
PMM1-7
382
PMM1-8
398
PMM1-9
406
Paper title
Authors
Effect of Back-EMF Constraints on Fractional-Slot
Surface PM Machines Designed for Wide
Constant-Power Speed Range Operation
Torque ripple improvement with IPMSM rotor
shape modification
A Backstepping Controller for Sensorless Speed
Control of DC Servo Motor Using Adaptive
Backstepping Observer
Torque ripple and cogging torque of surface
mounted PM machines with concentrated windings
Harmonic Current Injection Approach To Cogging
Torque Suppression In Axial Flux PM Synchronous
Machines
Experimental Validation of an Axial Flux PM
Machine with Field Weakening Capability
An analytical equation for cogging torque
calculation in surface mounted permanent magnet
motors
Toward Accurate Torque Calculation in Brushless
Permanent Magnet and Reluctance Motors
Iron Loss Calculation in a Reciprocating Tubular
Permanent Magnet Motor with Soft Magnetic
Composite
PMM1-10
444
PMM1-11
455
PMM1-12
456
PMM1-13
477
PMM1-14
566
Determination of d and q reactances of permanentmagnet synchronous motors using FEM
Design parameters for directly network connected
non-salient permanent magnet synchronous
generator
Disk Built-in DC Motor With High Coercive Nd-Fe-B
Magnets
Analytical vs. Numerical calculation of magnetic
circuits of PM Machines at no-load and load
Optimization Elements of the PM Excited
Transverse Flux Linear Motors
509
Experimental Tests on a 9-phase Direct Drive PM
Axial-Flux Synchronous Generator
PMM1-15
PMM1-16
529
PMM1-17
545
Comparison of non-salient pole permanent magnet
motors structures for traction application
Modeling and controlling attractive forces in
permanent magnet machines
9/34
Ayman M. EL-Refaie, Thomas M.
Jahns, John W. McKeever
S. Vivier, V. Lanfranchi, G. Friedrich
A. Farrokh Payam, B. Mirzaeian
Dehkordi, M. Keivanfard
P. Salminen, H. Jussila, M. Niemelä
and J. Pyrhönen
J.A. Tapia, D. Soto, A. Valenzuela,
R. Wallace
J. A. Tapia, D. Gonzalez, R. R.
Wallace, M. A. Valenzuela
K. Y. Lu, P. O. Rasmussen, E.
Ritchie
John Simkin, Christopher P. Riley,
and Alexandros M. Michaelides
T. Ibrahim, J. Wang, and D. Howe
J. A. Güemes, A. M. Iraolagoitia and
P. Fernández
Country of the
corresponding
author
USA
France
Iran
Finland
Chili
Chili
Denmark
UK
UK
Spain
J. Kinnunen, J. Pyrhφnen, O.
Liukkonen, P. Kurronen
Finland
M. Zagirnyak, P. Belyi, D. Miljavec
Ukraine
A. Rastogi, A. Binder
D. H. Kang and P. Curiac
D. Vizireanu, X. Kestelyn, S.Brisset,
P. Brochet, E.Semail
J. Figueroa, L.Radaorozandry,
J.Cros, P. Viarouge
H. Polinder, M. Huizer, M. Scuotto
Germany
Korea
France
Canada
Netherlands
XVII International Conference on Electrical Machines
Minoa Palace Hotel, Chania, Crete Island, Greece, September 2 – 5, 2006
Web-site: http://www.ntua.gr/ICEM2006/
PMM1-18
551
Cogging torque elimination in permanent magnet
machines
Bernard Laporte
France
10:20-11:30 POSTER (DIALOGUE) SESSION PMM2: DRIVES OF
INDUCTION MACHINES
Monday, September 4th 2006
No
Ref
Paper title
PMM2-1
120
PMM2-2
133
PMM2-3
172
Induction Motor Control using Predictive Algorithm
Closed-Form Analytical Investigation of
Electromagnetic Torque-Ripple Components in
Induction Motor Drive Fed from PWM VSI with DCLink Voltage Pulsation
Robust Sensorless Operation of Vector Controlled
AC motors using Extended Kalman Filter trained
neural networks
Authors
PMM2-4
189
PMM2-5
258
Control Limits of Three Phase AC Controller under
Induction Motor Load
Improved Rotor Flux Linkage Oriented Control of
an Induction Motor with Included Magnetic
Saturation
PMM2-6
322
High Performance Field Oriented Rotor Control of
Induction Generators
PMM2-7
357
PMM2-8
438
PMM2-9
447
PMM2-10
449
PMM2-11
423
PMM2-12
465
PMM2-13
485
PMM2-14
488
PMM2-15
489
PMM2-16
496
PMM2-17
539
PMM2-18
554
Induction Motor Control using Variable Structure
Approach
Computer investigation of the dynamic behaviour of
an asynchronous motor using fuzzy logic for
immediate torque control
Microscopic Investigation of Energy Conversion in
a Squirrel-Cage Induction Motor Drive under FieldOriented Control
In Wind-Unwind Application the Comparative
Realization of Tension Control with Induction
Motors Which are Run by Different Controlled
Techniques
Optimal speed trajectory tracking of an AC motor
drive system with simultaneous fuzzy logic
minimization of its electromechanical losses
Adaptive Fuzzy Control of Reversible Rectifier
Feeding Induction Motor with Improved Power
Factor
Development of a Wavelet theory-based FieldOriented Control method for small power Electrical
Machines
Robust Parameter Estimation Procedures for
Vector Controlled Induction Machine Drives
Robust Flux Weakening Operation of Induction
Motor Drives Based on Stator Flux Vector Control
Inverter Nonlinearities Compensation in a Double
Fed Induction Motor Drive close to Synchronous
Speed
Design of a Robust voltage controller for an
induction generator in an autonomous power
system
Design of Transient Excitation Sequences for
Sensorless Control of AC Machines
PMM2-19
588
PMM2-20
594
PMM2-21
662
Vectored Direct Torque Control for Induction Motor
under Losses Minimization
Transient states of polymerizer drive including real
load of specially designed induction motor
Modified Field Oriented Control of Induction
Machine
736
PWM Waveform impact on Induction Motor Drive
Efficiency
803
Power factor monitoring of induction machines by
using rotor flux oriented vector control
PMM2-22
PMM2-23
10/34
E.S. de Santana, E. Bim and W.C. do
Amaral
J. Klima
Vedam Subrahmanyam
A.I. Alolah, R.M. Hamouda and A.
Eltamely
D. Dolinar, G. Stumberger, P. Ljusev
V. Cecconi, V. Di Dio, A. O. Di
Tommaso, D. La Cascia, R. Miceli
Amar Golea, Abdelhakim Saiad,
Noureddine Golea, Naziha
Benounnas
Z. Koutsogiannis, G. Adamidis, A.
Fyntanakis,
M. Krishnamurthy and B. Fahim
Country of the
corresponding
author
Brazil
Czech
Republic
India
Saudi Arabia
Slovenia
Italy
Algeria
Greece
USA
N. Bekiroglu and E. Aycicek
Turkey
Eleftheria S. Sergaki, George S.
Stavrakakis,
Greece
M.T. Benchouia , A. Golea, S.E.
Zouzou and A. Ghamri
Algeria
E. Mitronikas
Carlos H. S. De Vasconcelos, Zelia
M. Assis Peixoto
Greece
D.Casadei, G. Serra, A. Tani, L.Zarri
Italy
M.S. Carmeli, F. Castelli Dezza, R.
Perini
Italy
Alon Kuperman, Vitaly Spitsa, Raul
Rabinovici, Ezra Zeev, George Weiss
Brazil
Israel
Austria
Th.M. Wolbank, J.L. Machl
Hmidet Ali, Bacha Faouzi, Dhifaoui
Rachid
Tunisia
A. Rusek, A. Popenda
Poland
Samir Moulahoum, Omar Touhami
Z. Papazacharopoulos, I. Xydis, I.
Tsakirakis
D. Raptis, A. Kladas and J.
Tegopoulos
France
Greece
Greece
XVII International Conference on Electrical Machines
Minoa Palace Hotel, Chania, Crete Island, Greece, September 2 – 5, 2006
Web-site: http://www.ntua.gr/ICEM2006/
10:20-11:30 POSTER (DIALOGUE) SESSION PMM3: DESIGN OF
ELECTRIC MACHINES AND TEACHING
Monday, September 4th 2006
No
Ref
PMM3-1
362
PMM3-2
385
PMM3-3
386
PMM3-4
464
PMM3-5
555
PMM3-6
726
PMM3-7
716
PMM3-8
134
PMM3-9
192
PMM3-10
204
PMM3-11
333
PMM3-12
450
PMM3-13
514
PMM3-14
692
PMM3-15
661
PMM3-16
630
PMM3-17
650
PMM3-18
171
Authors
Country of the
corresponding
author
M. Cistelecan, B. Cosan, M. Popescu
Romania
Paper title
Tooth Concentrated Fractional Windings for Low
Speed Three Phase a.c. Machines
The Implementation of Computational Fluid
Dynamics and Electromagnetic Finite Element
Methods as Standard Design Tools for Large
Synchronous Generators
Design of Plastic Bounded Iron Powder Core
Motors
Optimum designed induction motors with die-cast
aluminum and copper cages – a comparative
study
A Rational Way Combining Analytical and
Numerical Models with Deterministic Global
Optimization Algorithms for the Design of Electrical
Machines
Preliminary Design and FEM Analysis of a RotaryLinear Brushless Machine
On the optimal choice of the end ring resistance for
one slot per pole per phase single phase induction
motors
Hegel’s Dialectical Method as a Means for
Activating the Students’ Thinking during Delivering
the Lectures on the Transients in Induction Motors
Real Time Phasor Diagram of Synchronous
Machine as an Educational Tool
Development of Wind Turbines Prototyping
Software Under Matlab/Simulink®Through
Undergraduate Student Projects
Development and implementation of an automated
computer aided laboratory exercise integrated in
electrical drives courses
Free Fall Attraction as a Practical and Theoretical
Project in Electrical Engineering Education
Teaching numeric modeling and design of electrical
devices
Education modernization of Electric Power
Engineering Education at Budapest University of
Technology and Economics
Animation Model bank for Electrical Machinery
Teaching
Preparation measurements scripts, analysis,
selection of measuring apparatus units for
education process aims diagnostics of rotary
machines on example car alternator
Design Considerations for a High Performance
Electric Drive for an Unmanned Helicopter Main
Rotor
Skew Effect Parameters of AC Machines with
Skewed Slots
11/34
B. Streibl, E. Schlemmer, J.
Schönauer and F. Ramsauer
Austria
A. Reinap, M. Alaküla
Sweden
W. Jazdzynski
Poland
J. Fontchastagner, F. Messine, Y.
Lefevre
France
P. Bolognesi, L. Taponecco
Italy
M. Poloujadoff
France
G. Rogozin
D. Makuc, M. Berlec, M. Bugeza, K.
Lenasi
Ukraine
Slovenia
M.E.H. Benbouzid, D. Diallo, Y.
Amirat, H. Mangel and A. Mamoune
France
I. Tsoumas, A. Safacas
Greece
Carlsson, J. Soulard
Sweden
A.Reinap
Estonia
I. Vajda, S. Halasz
Luo Yingli, Chen Xiqiang, Wang Hao,
Wang Jing, Niu Yinsuo, Ma Bo, Liu
Xiaofang, Zhang Jianhua
Hungary
Konrad Skowronek, Artur Wozniak
Sam J. Nall and Phil H. Mellor
Vedam Subrahmanyam
China
Poland
UK
India
XVII International Conference on Electrical Machines
Minoa Palace Hotel, Chania, Crete Island, Greece, September 2 – 5, 2006
Web-site: http://www.ntua.gr/ICEM2006/
10:20-11:30 POSTER (DIALOGUE) SESSION PMM4: TESTING,
MEASUREMENTS, ACOUSTIC NOISE AND VIBRATION ASPECTS
Monday, September 4th 2006
No
Ref
PMM4-1
105
PMM4-2
114
PMM4-3
115
Paper title
Authors
Digital Calculation of Frequency of Sinusoidal
Signal
A Simplified Online-technique for the Detection of
Eccentricity in Induction Motor
Wavelet Analysis for the Detection of Inter-turn
Short-circuits and Broken Rotor Bars in Induction
Machines
PMM4-4
157
PMM4-5
220
PMM4-6
230
Development of a Small Spherical AC Servo Motor
for Laser Tracker
A new approach for EMI simulation of complex
electrical systems
Modified Method to Determine Rotor-Bar-Iron
Resistance in Three-Phase Copper Squirrel-Cage
Induction Motors
PMM4-7
304
Electromechanical system for static force
measurements on keyboard musical instruments
PMM4-8
178
PMM4-9
394
PMM4-10
487
Test-Bench for High-Speed High-Power Electrical
Drives
Stator Winding Resistance Measurement of
Inverter- Fed Induction Machines
Measurement and detection of Barkhausen Noise:
the time-domain approach
PMM4-11
542
PMM4-12
154
PMM4-13
577
PMM4-14
611
PMM4-15
506
PMM4-16
704
A Hybrid Algorithm for the Non Destructive Testing
of the Magnetic Materials
Vibration Sparking, an unrecognized damage
mechanism of High Voltage Windings
Validity of numerical impulse response test in
studying unbalanced magnetic pull in electrical
machines with parallel stator windings
On-line monitoring of the induction motor stator
windings temperature by using the modulating
function approach
Impedance Vector Monitoring strategy for on-line
detection of eccentricity in induction motors
An Effective Technique on Extracting Negative
Sequence Harmonic Information in Stator Current
Based Induction Motor Condition Monitoring
PMM4-17
710
Detection of Broken Rotor Bars in Induction Motor
Drives Using Run-up Test
PMM4-18
127
PMM4-19
131
PMM4-20
144
PMM4-21
305
PMM4-22
335
PMM4-23
359
Space Flux Pattern of DC-brushless Motor
Comparison of Vibration Characteristics of 3-phase
Permanent Magnet Machines with Concentrated,
Distributed and Modular Windings
Acoustic Optimization of a Switched Reluctance
Machine using Numerical Simulation
A New Structure for Stator Pole to Reduce Torque
Ripple and Acoustic Noise in Switched Reluctance
Motor
Vibrations optimization of brushless power steering
motor with taking into account magnetostriction
effects
Noise Reduction using Multi-Phase Windings for
Synchronous Machines
PMM4-24
387
PMM4-25
388
A coupled magnetic, structural and acoustic model
of the alternator
Modeling and verification of magnetic forces in the
alternator
468
Acoustic Measurement for detecting Manufacturing
Faults in Electrical Machines
PMM4-26
PMM4-27
601
PMM4-28
694
Permanent magnet synchronous machine
simulations to predict vibrations and acoustic noise
Vibroacoustic Methods in the Diagnosis of the
Electric Machines
12/34
T. Benslimane, B. Chetate
Pedro V. Jover Rodriguez, J. A.
Antonino, Antero Arkkio
Country of the
corresponding
author
Algeria
Finland
J. A. Antonino, P. Jover, M. Riera, A.
Arkkio, J. Roger-Folch
T. Yano, T.Takatuji, S.Osawa,
Y.Motomura, T.Itabe, T.Suzuki
Japan
E. Napieralska, D. Roger, K. Komeza
France
Konrad Dabala
Emmanuel Baudet, Patrick Ragot,
Miroslav Markovic and Yves Perriard
Dieter Gerling, Rainer Hildebrand,
Harald Hofmann, Kathrin Jungnickel,
Benno Lange
Poland
Spain
Switzerland
Germany
Y. Plotkin, M. Stiebler, M. Centner
Germany
B. Guinand, R.Goyet, O. Garrigues
A.Nouicer , M.E.H.Latreche and
M.Feliachi
France
Manfred Liese
Andrej Burakov and Antero Arkkio
A. Balestrino, O. Bruno, A. Landi, L.
Sani
Andreas Stavrou
Long Wu, Zhi Gao, Thomas G.
Habetler, and Ronald G. Harley
Rastko Fiser, Miroslav Bugeza,
Primoz Bajec, Henrik Lavric
F. Ishibashi, T.Takemasa,
T.Nishizawa, S.Noda
J. Wang, Z. P. Xia and D. Howe
B. Schmulling, K. Hameyer
M. Bahramgiri, M. Babaei, M.
Sahebzamani
Algeria
Germany
Finland
Italy
Cyprus
USA
Slovenia
Japan
UK
Germany
Iran
G. Ombach, J. Junak and A. Ackva
Germany
S. Schulte, K. Hameyer
M. Furlan, R.Rebec, A. Černigoj, D.
Čelič, M. Boltežar
Germany
A. Černigoj, M. Furlan
D. van Riesen, C. Schlensok, F.
Henrotte, K. Hameyer
S. Bujacz, M. Hecquet, M.
Goueygou, P. Brochet, J. Nieznanski
Slovenia
H. Balan, R.Tirnovan, P.Karaissas
Romania
Slovenia
Belgium
Poland
XVII International Conference on Electrical Machines
Minoa Palace Hotel, Chania, Crete Island, Greece, September 2 – 5, 2006
Web-site: http://www.ntua.gr/ICEM2006/
PMM4-29
712
PMM4-30
728
A fast noise predictive multiphysical model of the
PWM-controlled Asynchronous Machine
Magneto-elastic Coupling model for the study of
Vibrations in a Thin Plate
709
An effective test bench for PM synchronous motor
characterization
PMM4-31
J. Le Besnerais, A. Fasquelle, M.
Hecquet, A. Ait-Hammouda, V.
Lanfranchi, P. Brochet, A. Randria
F. Hocini, H. Mohellebi
L. Sgarbossa, M. Dai Pre, S.
Bolognani
France
Algeria
Italy
11:40-13:20 ORAL SESSION OMM1: PERMANENT MAGNET MACHINES
Monday, September 4th 2006
Athina1 Room
No
OMM1-1
Ref
137
OMM1-2
467
OMM1-3
397
OMM1-4
399
OMM1-5
684
Paper title
Authors
Comparative study of 2-phase Flux-Switching and
Doubly-Salient Permanent Magnet Brushless
Machines
Cogging Torque Analysis on PMSM Machines by
Simulation and Measurement
A general design strategy for multiphase machine
applied to the design of a 7-phase fractional slot
concentrated winding PM Machine
Maximum torque and inductances of surface
mounted PM machines
Physical Modeling of PM Synchronous Machine
With Short Circuit Winding Faults Based on CircuitField Coupled FE Analysis
Wei Hua, Ming Cheng, Z.Q. Zhu and
D. Howe
D. van Riesen, C. Schlensok, B.
Schmulling, K. Hameyer
F. Scuiller, JF Charpentier, E.
Semail, S. Clenet
P. Salminen, A. Parviainen, and J.
Pyrhönen
O. A. Mohammed, S. Liu, and Z. Liu
Country of the
corresponding
author
China
Germany
France
Finland
USA
11:40-13:20 ORAL SESSION OMM2: DRIVES OF INDUCTION MACHINES
Monday, September 4th 2006
Athina2 Room
No
Ref
OMM2-1
100
OMM2-2
673
OMM2-3
261
OMM2-4
371
OMM2-5
563
Paper title
Authors
Stator Winding Design for Multi-Phase Two-Motor
Drives with Single VSI Supply
Field Oriented Control of self-excited Induction
Generator
Dynamic behaviour of Low Power and Low Cost
Induction Machine Drives with Single Shunt
Operational Behaviour of a Vector Controlled
Induction Machine Drive System fed by a ThreePhase Space-Vector Modulated Matrix Converter
Self–Tuning Speed Controller Of Indirect Field–
Oriented Induction Machine Drives
13/34
E.Levi, M.Jones, S.N.Vukosavic and
H.A.Toliyat
A. Bellini, G. Franceschini, E.
Lorenzani, C. Iori, C. Tassoni
K. Kanelis, W. Zeng
Country of the
corresponding
author
UK
Italy
Germany
P. Potamianos, E. Mitronikas, A.
Safacas
Greece
M. Masiala and A. Knight
Canada
XVII International Conference on Electrical Machines
Minoa Palace Hotel, Chania, Crete Island, Greece, September 2 – 5, 2006
Web-site: http://www.ntua.gr/ICEM2006/
11:40-13:20 ORAL SESSION OMM3: DESIGN OF ELECTRIC MACHINES
Monday, September 4th 2006
Athina3 Room
No
Ref
OMM3-1
OMM3-2
113
212
OMM3-3
265
OMM3-4
OMM3-5
525
695
Paper title
Authors
Design Studies on Squirrel Cage Induction Motors
with Transient Finite Element Calculations and
Directly Coupled Circuits
Advancements in Electric Machines
Optimization of a Toothless BLDC Motor with
Faulhaber Winding using a Multiphysic Analytical
Model
Innovating engineering-focused software solution
for rotating electrical machines
Calculation of Stator Slot Harmonic Fields
C. Grabner
Jacek F. Gieras
P. Ragot, M. Markovic, Y. Perriard
G. Lacombe, A. Foggia, Y. Maréchal,
X. Brunotte
S. Williamson and Y.N. Feng
Country of the
corresponding
author
Germany
USA
Switzerland
France
UK
11:40-13:20 ORAL SESSION OMM4: TEACHING
Monday, September 4th 2006
Ariadne Room
No
Ref
OMM4-1
282
OMM4-2
519
OMM4-3
617
OMM4-4
570
A novel Web platform dedicated to teach Power
Electronics laboratory exercises
Teaching Electrical Engineering Students in
Creative Design
Java applets of electrical machines support
laboratory work
Computational Electromagnetics in the Teaching
Environment of an Electrical Machines Laboratory
– A Small Magnetic Levitator
648
Teaching Electric Drives: a Comparison of Basic
Modeling and Real Industrial A.C. Drives
OMM4-5
Paper title
Authors
13:20-14:30 Lunch at Minoa Palace Restaurant
14/34
Country of the
corresponding
author
I.C Kobougias, A.C. Nanakos, N.P.
Filippas, E.C. Tatakis
Greece
T.Jokinen
Finland
M. Centner, R. Hanitsch
Paulo G. Pereirinha and Carlos
Lemos Antunes
A. Molina-Garcia, E. Gomez, J.A.
Fuentes and J.A. Villarejo
Germany
Portugal
Spain
XVII International Conference on Electrical Machines
Minoa Palace Hotel, Chania, Crete Island, Greece, September 2 – 5, 2006
Web-site: http://www.ntua.gr/ICEM2006/
14:30-15:40 POSTER (DIALOGUE) SESSION PMA1: PERMANENT
MAGNET MACHINES
Monday, September 4th 2006
No
Ref
PMA1-1
572
PMA1-2
580
Paper title
Authors
Development of a shaft-mounted permanent
magnet generator for brushless excitation systems
of turbo-generators
Effect of the Presence of Magnetic Wedges on
Saturated Self and Cross-Coupling Inductances of
Permanent Magnet Synchronous Motors
PMA1-3
590
PMA1-4
591
PMA1-5
609
PMA1-6
615
PMA1-7
629
PMA1-8
683
PMA1-9
698
Efficiency Comparison of In-wheel PM Motors for
Bus Propulsion
Study on Optimal Design of Concentrated Winding
IPMSM with Wide Speed Range
Comparison of permanent magnet synchronous
machines with distributed and concentrated
windings
Steady-State and Transient Performance Analysis
for Line-Start Permanent-Magnet Synchronous
Motors with Skewed Slots
Permanent Magnet 3 MW Low-Speed Generator
Development
A Method for Time-Domain Analysis of PermanentMagnet Brushless Motors Using Permeance
Network Approach
Performance Evaluation of PM DC Commutator
Motor Based on FE Analysis
725
Vector Control of a Trapezoidal Back-EMF PMSM
Machine for High Speed Applications
PMA1-10
PMA1-11
635
PMA1-12
636
Performance comparison of IPMSM with distributed
and concentrated windings
Reduction of the cogging torques of permanentmagnet excited motors with radial flux by the poleshifting method
667
Study and Optimisation of an Electrical Generator
with Original Structure
696
Influence of magnetic materials on maximum power
limits of permanent magnet synchronous machines
703
Design Guidelines for the Optimisation of a
Switched Permanent Magnet Motor
PMA1-13
PMA1-14
PMA1-15
PMA1-16
706
PMA1-17
740
PMA1-18
735
Optimal design based on 2D analytical model of
axial flux permanent magnet synchronous machine
Permanent Magnet Machines with Concentrated
Windings
Integrated Design Process and Experimental
Verification of a 50 kW Interior Permanent Magnet
Synchronous Machine
15/34
A. Nakahara, K. Takahashi, A.
Semba, F.Goto, K. Hattori, and
M.Saeki
R. Lateb, F. Meïbody-Tabar, N.
Takorabet, J. Enon, A. Sarribouette
M. Andriollo, G. Bettanini, A. Morini,
G. Martinelli, A. Tortella
S. I. Kim, J. H. Bhan, J. P. Hong
R. Nuscheler
K. Kurihara, T. Monzen, and M. Hori
Country of the
corresponding
author
Japan
France
Italy
Korea
Germany
Japan
J. Pyrhönen and P. Kurronen
Finland
L. Ovacik, S. Alkan, B. Kemence
Turkey
G. Cvetkovski and L. Petkovska
A. Lidozzi, L. Solero, P. Kshirsagar
and D. Boroyevich
Soon O Kwon, Sung Il Kim, Jung Pyo
Hong
Marlene Marinescu, Nicolae
Marinescu, Wolfgang Wagner
M. Benseti, P. Dessante, P. Vidal,
J.C. Vannier, C. Marchand
R. Missoum, N. Bernard, M.E Zaim,
J. Bonnefous
D. Andessner, W. Amrhein, M.
Huber, G. Jungmayr
J. Azzouzi, N. Abdel Karim, G.
Barakat, B. Dakyo
Ekkehard Bolte, Burghard Kipp
M. Aydin, M. K. Guven, Seok-Hee
Han and T. M. Jahns
FYROM
Italy
Korea
Germany
France
France
Austria
France
Germany
USA
XVII International Conference on Electrical Machines
Minoa Palace Hotel, Chania, Crete Island, Greece, September 2 – 5, 2006
Web-site: http://www.ntua.gr/ICEM2006/
14:30-15:40 POSTER (DIALOGUE) SESSION PMA2: DRIVES OF VARIABLE
RELUCTANCE MACHINES AND PARTICULAR CONTROL TECHNIQUES
Monday, September 4th 2006
No
PMA2-1
PMA2-2
Ref
Paper title
Authors
332
Mathematical Modeling and Numerical Simulation
of the H2 Robust Controlled Stepping Motor-based
Systems
582
Sensorless Direct Torque Control of Switched
Reluctance Motor Using Artificial Neural Networks
PMA2-3
583
PMA2-4
538
PMA2-5
587
A Novel Position Sensorless Drive of SR Motors
Based on Direct Torque Control
A Real-Time environment for industrial electrical
drive control board testing
A Drive Circuit of Switched Reluctance Motors
using Three-phase Power Modules
116
A New Converter Topology for a Hybrid Brushless
dc Motor without Permanent Magnet
PMA2-6
PMA2-7
PMA2-8
201
330
PMA2-9
401
PMA2-10
435
PMA2-11
442
Wide Speed Control of a Hybrid Excited
Synchronous Machine
Human Brain Modeling of Motor Control
Variable Current Control of A Five Axis
Magnetically Levitated Turbomolecular Pump
A vector controlled axial flux seven-phase machine
in default mode
Modeling resolvers for their application in high
performance drives
Influence of the drive system on the performance of
a magnetic levitated disk
PMA2-12
PMA2-13
443
451
PMA2-14
495
PM excited polyphase machine with low inertia
Mechatronics traction control design to improve
comfort of a tyred electrical tramcar
504
An Efficient Kiln Drive System For The Cement
Industry
275
An Integrated Drive Circuit for Travelling Wave
Ultrasonic Motor
PMA2-15
PMA2-16
PMA2-17
314
PMA2-18
574
PMA2-19
729
Electrical Drive Assisted Mobility of Paraplegic
Patients
On a Control System Design Using the Partial
Model Model Maching of Controlled Processes
A Parallel-Connected Vector-Controlled Five-Phase
Two-Motor Drive
732
Simulation of common-bus drivers with use of
Object Oriented Programming
PMA2-21
16/34
Szász Csaba
Fuat Kucuk Hiroki Goto Hai-Jiao Guo
Osamu Ichinokura
M. Mitani, H. Goto, H. J. Guo and O.
Ichinokura
G. Bucca, F.L. Mapelli,M. Mauri
H. Goto, H. J. Guo
E. Afjei, M.A. Saati and M.M.
Nezamabadi
D. Fodorean, I.-A. Viorel, A. Djerdir,
A. Miraoui
Akshay S. Patwal
M. N. Şahinkaya, A. E. Hartavi and
R. N. Tuncay
F. Locment, E.Semail and X.
Kestelyn
J.-Ph. Conard, F. Labrique, P. Sente
H. Polinder, C.S.P. Tol, P.M.
Overschie, J.W. Spronck
W.-R. Canders, M. R. Rezaei
G. Bucca, F.L. Mapelli, M. Mauri
George A. Christopoulos and
Athanasios N. Safacas
Ch. Patsios, C. Efstathiou, E. C.
Tatakis, A. Tzes
Harald Hofmann, Dieter Gerling,
Johann Szecsi
F.F.Shoji, N.Takazaki and H.H.Lee
M.Jones, E.Levi and S.N.Vukosavic
Krystyna Macek-Kaminska, Marcin
Kaminski
Country of the
corresponding
author
Romania
Japan
Japan
Italy
Japan
Iran
France
India
Turkey
France
Belgium
Netherlands
Germany
Italy
Greece
Greece
Germany
Japan
UK
Poland
XVII International Conference on Electrical Machines
Minoa Palace Hotel, Chania, Crete Island, Greece, September 2 – 5, 2006
Web-site: http://www.ntua.gr/ICEM2006/
14:30-15:40 POSTER (DIALOGUE) SESSION PMA3: INDUCTION
MACHINES
Monday, September 4th 2006
No
Ref
Paper title
Authors
PMA3-1
507
PMA3-2
512
Artificial Neural Network Based Identification of
Nonlinear Model of Induction Machines
Thrust ripple reduction of linear induction motor by
using additional inductances
PMA3-3
521
Modeling of Split-Phase Induction Machine using
Rotating Field Theory
PMA3-4
523
A Novel Energy Saving Control Method of Motors
Used for Multi-mode Gravity load
PMA3-5
527
PMA3-6
532
PMA3-7
549
PMA3-8
550
PMA3-9
552
PMA3-10
565
PMA3-11
586
PMA3-12
618
Analysis of the three-phase induction motor with
spiral sheet rotor
Characteristics of End-effect Compensator using
Magnet Rotator for Linear Induction Motor
Three-Phase Induction Motor Simulation Model
Based on a Multifrequency Per-Phase Equivalent
Circuit Considering Stator-Winding MMF Spatial
Harmonics and Thermal Parameters
Considerations on the Custom Design of the
Stator-Winding of Low-Voltage, Three-Phase, Cage
Induction Motors to Improve their Efficiency and
Reliability
Torsional Dynamics of Generator-Units During The
Start-up of The Induction Motor
Notes About Inductances Calculation of Induction
Motor Under Radial And Axial Air-gap Eccentricity
Improving Three-Phase Induction Motor Efficiency
by the Optimized Design With Copper Rotor Cage
Finite – Element techniques enhancing the
traditional analytical induction motor design
procedure
620
Study on the Bearing Currents Activity in Cage
Induction Motors using Finite-Element Method
PMA3-13
PMA3-14
627
PMA3-15
631
PMA3-16
672
Modelling of a Squirrel-cage Linear Induction Motor
by Space Harmonics
Reduction of Harmincs of Single Phase Induction
Motors with a Small Power Range by Specified
Design Steps
Frequential modelling of induction machine in view
of phase currents simulation
677
Analysis of rotor slot harmonics rotation in squirrel
cage induction machines
PMA3-17
PMA3-18
678
PMA3-19
717
An Analytical Analysis for Self-Excited Induction
Generator
Full-Load and Half-Load Efficiency as
Characteristics of Energy Efficiency Induction
Motors at all Loads
17/34
R. Wamkeue, N. Kandil, D. Aguglia
Country of the
corresponding
author
Canada
T. Utsumi and I. Yamaguchi
P. Scavenius Anderson and D. G
Dorrell
Cui Xueshen, Luo yingli, Liu
xiaofang, Zhang liancheng,
Wangyilong
Ramon Mujal-Rosas, Oriol BoixAragones
Japan
N. Fujii and T. Yoshihara
Japan
UK
China
Spain
F. J. T. E. Ferreira, A. T. de Almeida,
and G. Baoming
Portugal
F. J. T. E. Ferreira and A. T. de
Almeida
Portugal
M. Mirosevic, Z. Maljkovic
Croatia
A. Ghoggal , S.E. Zouzou
Algeria
P-W. Han, Y-D.Chun, D-H. Koo
Korea
M. Centner, R. Hanitsch
F. J. T. E. Ferreira , P. Pereirinha
and A. T de Almeida
Ana Julia Escalada, Javier Poza,
Sergio Luri, Antonio González
Germany
Portugal
Spain
J. P. Bacher, HJ. Köfler
Austria
M. Belhaj, P. Guérin, M.E. Zaim
M.Y. Kaikaa, A. Khezzar, M.
Boucherma and M.E.K. Oumaamar
L. Louze, A. Khezzar and M.
Boucherma
France
M. Kostic
Serbia
Algeria
Algeria
XVII International Conference on Electrical Machines
Minoa Palace Hotel, Chania, Crete Island, Greece, September 2 – 5, 2006
Web-site: http://www.ntua.gr/ICEM2006/
14:30-15:40 POSTER (DIALOGUE) SESSION PMA4: DC MACHINES AND
ACTUATORS
Monday, September 4th 2006
No
Ref
PMA4-1
231
PMA4-2
602
PMA4-3
656
PMA4-4
272
PMA4-5
402
Paper title
Authors
Study of dynamic regimes at direct current motors
by numerical methods
Estimation of the electrical and mechanical
parameters of a permanent magnet dc motor model
taking into account the oscillations of the induced
voltage
Spectral Analysis of Signals of Commutator DC
Motor
Computer Simulation of Actuators Working on
Principle of Thermoelasticity
PM Tube machine designed for a controlled vehicle
shock-absorber suited for energy recuperative
operation
PMA4-6
416
PMA4-7
472
StackedType Electrostatic Actuator with Squared
Thick Electrodes
Promoting the Virtual Work Principle as the
General Way to Compute a Magnetic Force:
Application to Voice-coil Type Actuators
480
Two cogging force minimization applied to a linear
actuator
PMA4-8
PMA4-9
490
PMA4-10
522
PMA4-11
612
PMA4-12
641
Integrated Electromagnetic-Thermal-Mechanical
Design of Tubular Permanent Magnet Actuators
Electromagnetic Valve Controlled Internal
Combustion Engines: a Comparison Between Two
Major Topologies
Smart BLDC actuator with an integrated
mechanical clutch
A multi-air-gaps linear electric actuator design
using finite elements methods
642
Selection of the Soft Magnetic Materials for a High
Precision Positioning System Design
645
Passive and Active Constant Force-Displacement
Characteristics of a Long-Stroke Linear Actuator
697
Design and optimization of a clutch magnet
actuator
658
Torque Analysis of Various Microshutter Actuators
Using Virtual Work Principle
659
Development of microspeaker with a linear air gap
in mobile phones
PMA4-13
PMA4-14
PMA4-15
PMA4-16
PMA4-17
Country of the
corresponding
author
I. Vlad, A. Campeanu, S. Enache
Romania
Roland R. Seebacher, Guenther
Dannerer, Klaus Krischan, Georg
Ofner
Austria
Z. Głowacz and A. Zdrojewski
I. Dolezel, M. Mach, B. Ulrych
Istvan Zador, Daniel Horvath, Istvan
Vajda
Kazuo Okuda, Yoshiyuki Hata and
Keiji Saneyoshi
D. Ladas, V. Mazauric and P.
Pruvost
G.Krebs, A.Tounzi, B.Pauwels,
D.Willemot, F.Piriou
D.Casadei, F. Milanesi, G. Serra, A.
Tani, L.Zarri
Poland
Czech
Republic
Hungary
Japan
France
France
Italy
H. Aloui, M. Gabsi,H. Ben Ahmed
and M. Lecrivain
France
J. Tbatou, D. Prudham, L. Billet
France
N. Ziegler, D.Matt, J.Jac ,P. Enrici
A. Lebedev, E. Lomonova, D. Laro,
A. Vandenput
L. Encica, J. Paulides, E. Lomonova,
A. Vandenpu
V. Pauvert, N. Bernard, M.E. Zaοm,
J. Bonnefous
Hong-Joo Lee, Sang-Moon Hwang
and Tae-Soon Kim
Sang-Moon Hwang , Joong-Hak
Kwon and Yong-Chang Yang
France
Netherlands
Netherlands
France
Korea
Korea
14:30-15:40 POSTER (DIALOGUE) SESSION PMA5: MATERIALS AND
LOSSES
Monday, September 4th 2006
No
Ref
Paper title
PMA5-1
378
Adjustable-Angle Triangular Lossy DNG Slabs with
Enhanced Focusing Capabilities
PMA5-2
411
Effect of Machining on the Properties of ResinBased Soft Magnetic Composites
PMA5-3
417
Eddy Current Losses and Demagnetization in
Permanent Magnets
PMA5-4
730
PMA5-5
741
Authors
Optimization Material Distribution in Ferromagnetic
Electromagnet
Variation of Magnetic Flux Density with Distance
from the Cut Edge of Grain Oriented Electrical
Steel
18/34
D. L. Sounas, N. V. Kantartzis, and
T. D. Tsiboukis
M. R. Dubois, P. Lemieux, D.
Massicotte
C. da Silva, Z. Makni, M. Besbes, C.
Marchand, Adel Razek and Renato
Carlson
P. Boissoles, H. Ben Ahmed, M.
Pierre, B. Multon
G. Loizos, A. J. Moses
Country of the
corresponding
author
Greece
Canada
Brazil
France
Greece
XVII International Conference on Electrical Machines
Minoa Palace Hotel, Chania, Crete Island, Greece, September 2 – 5, 2006
Web-site: http://www.ntua.gr/ICEM2006/
Investigation of thermal ageing process of NdFeB
magnets
PMA5-6
334
PMA5-7
259
PMA5-8
271
PMA5-9
297
Interlaminar Losses Evaluation in Electrical
Machines Stators
Additional Eddy Current Losses in the Stator
Clamping System of Large Hydro Generators
caused by the Third Harmonic of the Airgap Field
Calculation of losses in retaining sleeves of high
speed permanent magnet brushless machines:
simple analytical approach versus finite element
method
PMA5-10
302
Influence of Perpendicular Flux in Laminated Core
and Core Losses
PMA5-11
500
PMA5-12
548
PMA5-13
556
PMA5-14
569
PMA5-15
623
Iron losses distribution in a railway traction
induction motor
Circulating Currents in the Parallel Stator
Conductors of Electrical Machines
Modeling the eddy currents in conducting sleeves
by an analytical field calculation method
Polarization Effect on Iron Losses in Induction
Motors
Influence of the values of the coefficients in
Bertotti’s statistical expression on the loss figure
computation in induction motors
Istvan Meszaros
E. J. Meurer, N. J. Batistela, R.
Carlson, N. Sadowski, L. Von
Dokonal, A. A. de Espindola
Erich Schmidt, Georg Traxler-Samek,
Alexander Schwery
Hungary
Brazil
Austria
Dan M. Saban, Jacek F. Gieras, and
Thomas A. Lipo
H. Mogi, C. Kaido, S. Kanao,
Y.Mishima, K. Yamazaki, Y.
Watanabe A. Nakahara, K.
Takahashi, K. Ide, K. Hattori, and T.
Watanabe
A. Fasquelle, A. Ansel, S. Brisset, P.
Brochet, A. Randria
France
M. J. Islam, A. Arkkio
Finland
M. Leroy, C. Henaux , B. Nogarede
L. T. Ergene, S. J. Salon, R.C.
Degeneff,
France
P. Arboleya, G. Díaz, C. GonzálezMorán, J. Gómez-Aleixandre
USA
Japan
Turkey
Spain
15:40-16:00 Coffee Break
16:00-17:40 ORAL SESSION OMA1: MONITORING AND DIAGNOSTICS
Monday, September 4th 2006
Athina1 Room
No
OMA1-1
Ref
Paper title
671
Accurate Monitoring of Rotor Modulating Signals
for Doubly-Fed Induction Machines Fault Diagnosis
OMA1-2
553
OMA1-3
253
OMA1-4
478
OMA1-5
655
New multipole decomposition method for the
measured magnetic signal
Multi-Slice FE Modelling of Induction Motors
havinga Broken Bar–Influence of Inter-Bar Currents
and Bar Breakage Location
Test bed for virtual inertia variation to induction
machines diagnostic aims
Fault detection in the subsynchronous cascade
drive via time and frequency analysis of the rotor
current space vector
19/34
Authors
Country of the
corresponding
author
A.Yazidi, G.A. Capolino, A. Bellini, F.
Filippetti, C. Rossi, A. Stefani, D.
Casadei
O-Mun Kwon, Sheppard J. Salon,
M.V.K. Chari, and Jerry P. Selvaggi
France
J. Gyselinck and X.M. LopezFernandez
A. Bellini, C. Concari, G.
Franceschini, E. Lorenzani, D.
Schiavi, C. Tassoni, A. Toscani
I. Tsoumas, A. Safacas
USA
Belgium
Italy
Greece
XVII International Conference on Electrical Machines
Minoa Palace Hotel, Chania, Crete Island, Greece, September 2 – 5, 2006
Web-site: http://www.ntua.gr/ICEM2006/
16:00-17:40 ORAL SESSION OMA2: DRIVES OF VARIABLE RELUCTANCE
MACHINES
Monday, September 4th 2006
Athina2 Room
No
Ref
OMA2-1
161
OMA2-2
167
OMA2-3
493
OMA2-4
541
OMA2-5
743
Paper title
Authors
Calculation of the Optimal Fire Angles in SinglePulse Controlled Switched Reluctance Generator
Drives
Evaluation of Switched Reluctance Motor Drives for
Wide Speed Range Drive Applications
A Novel Suggestion of High Efficency Servo Drive
Method for The Stepping Motor By The Sensorless
Control
Sensorless Vector Control Parameters Estimation
of Synchronous Reluctance Motor Using a Coupled
FEM & Preisach Model
Speed Control of Axial Laminations Switched
Reluctance Motor Provided with Digital Pole
Placement Controller
Country of the
corresponding
author
Christos Mademlis and Iordanis
Kioskeridis
Greece
Cuneyt Karacan, H. Bülent Ertan
Turkey
M. Yoneda , H.Dohmeki
Hong Seok Kim, Jung Ho Lee, Jung
Min Park, Min Myung Lee and JangSung Chun
Japan
H.M.Hasanien, N.H. Saad, M.A.
Mostfa and M.A.Badr
Korea
Egypt
16:00-17:40 ORAL SESSION OMA3: ELECTRIC VEHICLES AND POWER
ELECTRONICS
Monday, September 4th 2006
Athina3 Room
No
Ref
OMA3-1
273
OMA3-2
592
OMA3-3
613
OMA3-4
355
OMA3-5
670
Paper title
Authors
Traction Drive Technology at Voith - Design
Aspects and Solutions
Development of Multi-layer Buried Permanent
Magnet Synchronous Machine for Vehicle
Application
Global Optimal Design of a Traction Motor by a
Systemic Approach of the Electric Drive Train
A Three-Level Shunt Active Power Filter Controlled
with the Space Vector Pulse Width Modulation
Analysis and Minimization of Output Current Ripple
of Five Phase PWM Inverters
20/34
Country of the
corresponding
author
Andreas Lange
Sang-Yeop Kwak, Jae-Kwang Kim,
Sang-Yong Jung, Cheol-Gyun Lee
and Hyun-Kyo Jung
Germany
V. Mester, F. Gillon and P. Brochet
France
H. Djeghloud, H. Benalla
Algeria
Pekik Argo Dahono
Korea
Indonesia
XVII International Conference on Electrical Machines
Minoa Palace Hotel, Chania, Crete Island, Greece, September 2 – 5, 2006
Web-site: http://www.ntua.gr/ICEM2006/
16:00-17:40 ORAL SESSION OMA4: DC MACHINES AND ACTUATORS
Monday, September 4th 2006
Ariadne Room
No
Ref
OMA4-1
528
OMA4-2
405
OMA4-3
471
OMA4-4
632
Brush DC motor simulation with Cassie arc model
Development of Fish Robot Using Stacked-type
Electrostatic Actuators
From Electromagnetic Modeling to Life Cycle
Assessment: A Complete Framework for Actuator
Designing
Optimal Design of a Linear Permanent Magnet
Actuator for Active Roll Control in Automotive
Applications
646
A Power Line Communication Approach for
Automotive Electromechanical Actuators
OMA4-5
Paper title
Authors
J. Cros, N. Fontaines, V. Masson, J.
Jeuvrey, J. Figueroa, P. Viarouge
Canada
Y.Hata, K.Saneyoshi, K. Okuda
Japan
D. Ladas and V. Mazauric
France
L. Encica, J. Paulides, E. Lomonova,
A. Vandenput
E. Arabia, A. Consoli, C. Ciofi, R.
Merlino, A. Testa
19:30 Departure from Minoa Palace Hotel for the Official Dinner
21/34
Country of the
corresponding
author
Netherlands
Italy
XVII International Conference on Electrical Machines
Minoa Palace Hotel, Chania, Crete Island, Greece, September 2 – 5, 2006
Web-site: http://www.ntua.gr/ICEM2006/
Tuesday, September 5th 2006
09:00-10:00 : PLENARY ORAL SESSION OSK3 (Athina1 Room)
Keynote presentation by J. Donoso, (Gamesa) Spain, on description of activities of the
company and on “Recent advances on generators for wind-turbines”
10:00-10:20 Coffee Break
10:20-11:30 POSTER (DIALOGUE) SESSION PTM1: POWER GENERATION
BY RENEWABLE SOURCES
Tuesday, September 5th 2006
No
Ref
Paper title
Authors
PTM1-1
PTM1-2
164
168
PTM1-3
173
A Stochastic Model for Isolated Eolian Installations
Design Aspects and Performance Simulations of
Wind Turbine Generators
PTM1-4
198
Application of Fuzzy Logic Control based Statcom
to stabilize Wind Turbine Generator System
An electrical machine approach to power flow
control in power systems with wind integrations
PTM1-5
227
PTM1-6
242
Integration of Wind Energy in Competitive
Electricity Markets
Steady State Equivalent Model of PM Generators
Feeding Capacitor Loaded Diode Bridges, for
Wind Energy Generation
243
The State of the Art of Generators for Wind Energy
Conversion Systems
PTM1-7
PTM1-8
248
Wind Generator Stabilization by PWM Voltage
Source Converter and Chopper controlled SMES
A Study of Cooperative Operation of Flywheel
Generator and Hydrogen Electrolyzer with Wind
Generator
PTM1-9
316
PTM1-10
317
PTM1-11
328
PTM1-12
PTM1-13
349
396
PTM1-14
366
Sources of harmonics in wind farms
Simulation Analysis of 2 MW Doubly Fed Induction
Generator Wind Turbine with Active Crowbar under
Network Disturbance
PTM1-15
375
A Grid-connected Photovolatic System using
Current-Source Inverter
403
Influence of distributed generators on the harmonic
level of a 20 kV distribution network
PTM1-16
PTM1-17
448
PTM1-18
649
PTM1-19
723
PTM1-20
737
Fundamental Research of Hydrogen Production
System Using Variable Speed Wind Generator
Dynamic Contribution Of DFIG Based Wind Plants
To System Frequency Disturbances
Smoothing of the wind power production by a
geographical spreading of the wind farm:
application to asynchronous doubly-fed wind
generators
Impacts of Distributed Generators on the Inrush
Transient of Distribution Power Transformers
Optimal Matching Between a Permanent Magnet
Synchronous Machine and a Wind Turbine –
Statistical Approach
Robust Nonlinear Control for Vibration Attenuation
in Variable Speed Wind Turbines
Simple control schemes for grid-connected threephase voltage-source inverters of DG units
22/34
Marta Molinas, Tore Undeland
J. Fouladgar
X. Feng, G. Rupertus and H. Chen
S.M. Muyeen, Mohammad Abdul
Mannan, Mohammad Hasan Ali, Rion
Takahashi, Toshiaki Murata and Junji
Tamura
S. N. Singh and Demetrios P.
Papadopoulos
A. Di Gerlando, G. M. Foglia, R.
Perini, M. Ubaldini
Y. Amirat, M.E.H. Benbouzid, B.
Bensaker and H. Mangel
Mohd. Hasan Ali, Toshiaki Murata,
and Junji Tamura
Masaaki Nobuta, Rion Takahashi,
Toshiaki Murata, Junji Tamura
Hideyuki Nakabayashi, Rion
Takahashi, Toshiaki Murata, Junji
Tamura
M. Kayıkçı, J.V. Milanović
Country of the
corresponding
author
Norway
France
USA
Japan
India
Italy
France
Japan
Japan
Japan
UK
F. Vallée, J. Lobry and O. Deblecker
Y. Plotkin, D. Schulz, R. Hanitsch
Belgium
Germany
S. Seman, J. Niiranen, and A. Arkkio
Joung-Min Lim, Sang-Hun Lee,
Sung-Jun Park, Chae-Joo Moon,
Man-Hyung Lee
A. Dagoumas, A. Marinopoulos, F.
Kinis, C. Demoulias, P. Dokopoulos
M.B.B. Sharifian, A. Yazdanpanah
Ghoharrizy
Finland
D. Morales, M. López, J-C. Vannier
A. G. Soldatos, S. A.
Papathanassiou, M. P.
Papadopoulos and A. G. Kladas
France
Greece
F. Gakis, S.Papathanassiou
Greece
Korea
Greece
Iran
XVII International Conference on Electrical Machines
Minoa Palace Hotel, Chania, Crete Island, Greece, September 2 – 5, 2006
Web-site: http://www.ntua.gr/ICEM2006/
10:20-11:30 POSTER (DIALOGUE) SESSION PTM2: DRIVES OF
SYNCHRONOUS, PM AND DC MACHINES
Tuesday, September 5th 2006
No
Ref
Paper title
Authors
PTM2-1
526
PTM2-3
344
PTM2-4
702
Operational Behaviour of Industrial DC Drives in
Paper Machines in Relation to Elastic Shafts
Characteristics
Accurate Torque Control of VSI Fed Synchronous
Machine Under Normal or Fault Conditions Using
Discrete Modelling of Airgap Flux
Brushless, Self-Excited Synchronous Field-Winding
Machine for Variable-Speed Drive Applications
128
The New Methodology Of The Power Loss
Calculation Under Deformed Flux Conditions
PTM2-5
PTM2-6
415
PTM2-7
341
PTM2-8
379
PTM2-9
342
AC High Dynamometer for testing motor drive
system
Fast Prototyping of Vector Controllers for Interior
PM Synchronous Motors
Current Waveform Analysis of PWM Inverter-Fed
Permanent Magnet Synchronous Machine
Accounting for Cross-Magnetization
Sensorless Control of PM Synchronous Motors with
Luenberger Observer: Theoretical Issues and
Implementation Results
PTM2-10
460
PTM2-11
626
Speed Control of Permanent Magnet Synchronous
Motors by Current Vector Control
Line-Start Permanent-Magnet Chemical Pump
Drives
237
Versatile High Torque Direct Drive with PMExcitation and Duplex Stator Arrangement
PTM2-12
PTM2-13
257
PTM2-14
129
PTM2-15
155
PTM2-16
307
A Novel Drive Strategy for Vibration Suppression in
Permanent Magnet Brushless DC Motor
Implementation of an active converter for high
quality dc drive performance
Controlled DC Electric Drive Based on Stochastic
Calculation Techniques
Determination of the Optimum Power Factor and
Efficiency of a Characteristic DC Drive System via
Simulation
440
Optimal Integral State Feedback controller for a DC
motor
255
Simplified sensorless control technique for wound
rotor synchronous motor
PTM2-17
PTM2-18
23/34
Country of the
corresponding
author
C. Michael, A. Safacas
Greece
M. Bekemans, F. Labrique, E.
Matagne
Belgium
Alexander Rovnan, Heath Hofmann
Z. Gmyrek, A. Boglietti, A.
Cavagnino
Gildong Kim, Hanmin Lee, Sehchan
Oh, Sunghyuk Park
M. Tursini, A. Scotti
M. Kimura, K. Ide, H. Mikami
M. Tursini, A. Scafati, R. Petrella
P. Fernandez, J. A. Goemes and A.
M. Iraolagoitia
USA
Poland
Korea
Italy
Japan
Italy
Spain
UK
A.C.Smith and E.Peralta Sanchez
W.-R. Canders, H. Mosebach, M. R.
Rezaei
Tao. Sun, Gen-Ho Lee, Jeng-Pyo
Hong
Germany
N.N. Barsoum, S.K. Wong
Malaysia
Achmad Alyan and Raul Rabinovici
K. Georgakas, A. Safacas, I.
Georgakopoulos
H. Delavari, GH. Alizadh,
M.Sharifian,
F. Chabour, J. P. Vilain, P. Macret, P.
Masson, L. Kobylansky
Korea
Israel
Greece
Iran
France
XVII International Conference on Electrical Machines
Minoa Palace Hotel, Chania, Crete Island, Greece, September 2 – 5, 2006
Web-site: http://www.ntua.gr/ICEM2006/
10:20-11:30 POSTER (DIALOGUE) SESSION PTM3: TRANSFORMERS AND
INDUCTORS
Tuesday, September 5th 2006
No
PTM3-1
Ref
Paper title
170
Design and Built of on - Load Fully Electronic TapChanger with Triac Switch: Simulation and
Practical Results
PTM3-2
209
PTM3-3
PTM3-4
291
325
PTM3-5
407
PTM3-6
431
PTM3-7
470
PTM3-8
510
PTM3-9
596
PTM3-10
599
PTM3-11
643
PTM3-12
PTM3-13
663
708
PTM3-14
714
PTM3-15
664
PTM3-16
715
Authors
Core Effects Modeling For Three Phase
PowerTransformers
Finite Element Calculation of Winding type Effect
on Leakage Flux and Electromagnetic Forces in
Distribution Transformers
Stray Losses in Transformer Clamping Plate
Fuzzy Logic for Diagnostic in Power Transformers
Reduction of Winding Leakage Flux and
Electromagnetic Forces in Single Phase Shell Type
Transformers Using Genetic Algorithms
Methodology for the Optimum Design of Power
Transformers using minimum number of input
parameters
Finite Element Based Methodology for the Accurate
Prediction and Minimization of No Load Loss in
Power Transformers
A Detailed Single-Phase Core-Type Transformer
Model Based on Jiles-Atherton Theory of
Ferromagnetic Hysteresis
Executable Heterogeneous Model of an Adaptive
Fuzzy Logic Controller and Switchable Engergy
Efficient Distribution Transformer
Exposure to magnetic fields in the vicinity of
transformers
An Analytic Method for Optimal Location of Internal
Shield within A Disk Winding
Variable Frequency Transformer Concept
Zero-sequence flux protection of a three-limb core
power transformer
A General Method for Including Core Losses in a
Lumped Parameter Transformer Models
A New Method for Estimation of Loss of Life of
Power Transformer Supplying Nonlinear Loads
PTM3-17
148
PTM3-18
219
Design of Permanet Magnet Compact Inductor for
Frequency Converter
Application of pattern recognition method to the
diagnosis in induction machine
PTM3-19
268
Contactless Energy Transfer for Office and
Domestic Applications
PTM3-20
310
PTM3-21
603
Three-dimensional Reluctance Network Analysis of
an EIE-Core Variable Inductor and Application to
Automatic Voltage Regulator
Design and study of a saturated DC reactor fault
current limiter (FCL)
690
An Optimized Design of Solenoids in an Intake
Valve Train System
PTM3-22
24/34
M. Ardebili, K. Abbaszadeh, A.R.
Alaei
Jorge Pleite, Carlos Gonzalez, Juan
Vazquez, Antonio Lazaro
M.B.B. Sharifian, J. Faiz, M.
Ghadimi, G. Ahrabian
Z. Janic, Z. Valkovic, Z. Stih
M.Z.Fortes, H.P. Amorim Junior,
A.C.Dominguetti Junior and
R.M.Abrota
A.M. Kashtiban, M.B.B Sharifian, A.
Vahedi
Eleftherios I. Amoiralis, Erion Litsos,
and Pavlos S. Georgilakis
AnastasiaJ. Tsivgouli, Marina A. Tsili,
Pavlos S. Georgilakis, Antonios G.
Kladas, A. T. Souflaris and D. G.
Paparigas
A. D. Theocharis, J. Milias-Argitis,
Th. Zacharias
R. Kiefer and Sam Ali
E. Mimos D. Tsanakas A. Tzinevrakis
R.C.Degeneff , S. J. Salon , L.T.
Ergene
Arezki Merkhouf
M.A.Tsili, S.A.Papathanassiou
R.C.Degeneff , S. J. Salon , N.
Yaghi, L.T. Ergene
Ali Farshidnia
A. Belahcen, P. Pieteris, P.
Virolainen
O. Ondel, E. Boutleux, G. Clerc
C.L.W. Sonntag, E.A. Lomonova, J.L.
Duarte, A.J.A. Vandenput, and
A.J.M. Pemen
K. Nakamura, T. Tomonaga, S.
Akatsuka, T. Ohinata, Y. Sato, and
O. Ichinokura
M. Abapour, M.T. Haque
Long Wu, Aristidis Zachas, Ronald
G. Harley, and J. Rhett Mayor
Country of the
corresponding
author
Iran
Spain
Iran
Croatia
Brazil
Iran
Greece
Greece
Greece
Australia
Greece
USA
Canada
Greece
USA
Iran
Finland
France
Netherlands
Japan
Iran
USA
XVII International Conference on Electrical Machines
Minoa Palace Hotel, Chania, Crete Island, Greece, September 2 – 5, 2006
Web-site: http://www.ntua.gr/ICEM2006/
10:20-11:30 POSTER (DIALOGUE) SESSION PTM4: ELECTRIC VEHICLES
AND POWER ELECTRONICS
Tuesday, September 5th 2006
No
Ref
PTM4-1
101
PTM4-2
147
Paper title
Authors
PTM4-3
319
PTM4-4
336
PTM4-5
350
Mathematical Model of the Electric Vehicle
Autonomy
Design of Permanent Magnet Synchronous
Machine for Electrical Vehicle
Integration of an Induction Machine Synthesis in a
Multiphysic Simulation tool for Automotive
Applications
Comparing the Conventional Control Method and
the Fuzzy Control Method in Hybrid Fuel cell
Electric Vehicle
A Self-Reconfigurable and Fault-Tolerant Induction
Motor Control Architecture for Hybrid Electric
Vehicles
400
Sliding Mode Control of EV Electric Differential
System
PTM4-6
PTM4-7
414
PTM4-8
476
PTM4-9
104
PTM4-10
107
PTM4-11
162
PTM4-12
377
PTM4-13
395
PTM4-14
420
PTM4-15
543
PTM4-16
560
PTM4-17
568
PTM4-19
625
PTM4-20
644
PTM4-21
670
PTM4-22
721
PTM4-23
724
Analysis of Voltage Unbalance on Korean Railway
System
Comparison of the Field Oriented and Direct
Torque Control Methods for Induction Motors used
in Electric Vehicles
Voltage and Current Disturbance Elimination with
Reactive Power Compensation Using Unified
Power Quality Conditioner
Design of Fixed-Gain PID Controller for Use with a
Static Var Compensator
Off-Line Fuzzy Compensation Technique Applied
on the Load Characteristics of a DC to DC
Converter Using Microcontroller
The operating system of high-power LED module
with Back-Boost mode
DC Offset at PWM-Inverter Output due to
Tolerances of the Optical Link Junction for IGBTControl Signals
Analysis and design of a current fed resonant
converter applied to high-frequency magnetic cores
measurements
Modeling of synchronous motor fed loadcommutated converter considering the subtransient quantities
Design Solutions for High Current Fast Switching
Power Stage with Paralleled MOSFETs for Dual
Axes PMSM Drives
Active Harmonic Filter Behaviour in a Twelve-Pulse
Front-End Rectifier Under Faulty Conditions
Current THD Improvement using predictive control
of 3-level PWM Rectifier in DTC high power
Induction Motor Drives using 3-level Inverters
Requirements and Implementation of an AC-to-DC
Power Converter for Micro Wind Turbine
Analysis and Minimization of Output Current Ripple
of Five Phase PWM Inverters
On Power Factor Correction considering Energy
losses, in Medium Size Industrial Plants with Non
Linear Loads
Converter for Switched Reluctance Generator With
Variable DC-Link Voltage for High Speed
Applications
25/34
Country of the
corresponding
author
S. Tounsi, R. Neji and F. Sellami
Tunisia
A. Belahcen, J. Perho, S-Y Jung
Finland
J. Legranger, G. Friedrich, R. Trigui,
F. Badin
France
M. Amirabadi, Sh. Farhangi
M. Zeraoulia, M.E.H. Benbouzid and
D. Diallo
A. Haddoun, M.E.H. Benbouzid, R.
Abdessemed, J. Ghouili and K. Srairi
Hanmin Lee, Gildong Kim, Sehchan
Oh, Sunghyuk Park
A.D. Karlis, K. Kiriakopoulos, D.P.
Papadopoulos and E.L. Bibeau
T. Benslimane, K. Aliouane, B.
Chetate
John Ch. Dermentzoglou, Demetrios
P. Papadopoulos
Iran
France
France
Korea
Greece
Algeria
Greece
Ahmed Massoud, Mahmoud Masoud,
and Mohamed El-Hawary
Sung Geun Song, Sung Jun Park,
Hae kon Nam, Chae Ju Moon, Ji
Hyun Chung
Korea
Y. Plotkin, M. Centner, D. Schulz, R.
Hanitsch
Germany
G. Tselos, G. Dimitrakakis, E.C.
Tatakis
V. Manoliu
Egypt
Greece
Romania
R. Nalepa, J. Muckian, H. Levy, M.
Kearney
Adérito N. Alcaso, A. J. Marques
Cardoso
Portugal
G. Brando, A. Dannier, A. Del Pizzo
Italy
O-P.Laitinen T.Lindh J.Ahola
Pekik Argo Dahono
Ireland
Finland
Indonesia
P. Vallianatos, N. Tasios, S.Manias
Greece
Lipták, M., Rafajdus, P., Hrabovcová,
V
Slovakia
XVII International Conference on Electrical Machines
Minoa Palace Hotel, Chania, Crete Island, Greece, September 2 – 5, 2006
Web-site: http://www.ntua.gr/ICEM2006/
11:40-13:20 ORAL SESSION OTM1: POWER GENERATION BY
RENEWABLE SOURCES
Tuesday, September 5th 2006
Athina1 Room
No
Ref
OTM1-1
152
Detection of winding faults in windmill generators
using the Wavelet Transform Analysis method
360
Comparison of generator topologies for direct-drive
wind turbines including structural mass
OTM1-2
Paper title
Authors
OTM1-3
424
OTM1-4
499
Analysis of A Novel Transverse Flux Generator in
Direct-driven Wind Turbines
Design criteria and analysis of a 75 kW brushless
doubly-fed asynchronous generator prototype for
wind power systems
733
Generic Model and Control Modes for a FullConverter Synchronous Wind Generator
OTM1-5
Zacharias Getsis, Michalis Zervakis
and George Stavrakakis
A.S. McDonald, M.A. Mueller and H.
Polinder
D. Svechkarenko, J. Soulard, and C.
Sadarangani
R. Carlson, F. Runcos, H. Voltolini,
P. Kuo-Peng, N. J. Batistela
G. Tsourakis, E. Farantatos, and C.
D. Vournas
Country of the
corresponding
author
Greece
UK
Sweeden
Brazil
Greece
11:40-13:20 ORAL SESSION OTM2: DRIVES OF SYNCHRONOUS
MACHINES
Tuesday, September 5th 2006
Athina2 Room
No
Ref
Paper title
Authors
OTM2-1
339
OTM2-2
153
OTM2-3
138
OTM2-4
491
Comparison of Synchronous PM Machine Types
for Wide Constant-Power Speed Range Operation:
Converter Performance
Fault Detection and Isolation based PI Controllers
On-Line Tuning for Permanent Magnet
Synchronous Machines
Inductance Harmonics in Permanent Magnet
Synchronous Motors and Reduction of Their
Effects in Sensorless Control
Interactive Modeling and Simulation of a six step
continuous current mode Inverter fed Permanent
Magnet Synchronous Motor Drive using Simulink
524
On the Influence of Saturation and Mutual Coupling
of both Orthogonal Magnetic Axes on a MTPA
Controlled Interior PMSM Drive
OTM2-5
26/34
Ayman M. EL-Refaie, Thomas M.
Jahns
Country of the
corresponding
author
USA
E. Altamiranda, E. S. Hamdi
Sweden
A. Piippo and J. Luomi
Finland
Narayanaswamy. P.R. Iyer, Jianguo
Zhu
Frederik M.L.L. De Belie, Thomas J.
Vyncke, Jan A.A. Melkebeek, Kristof
R. Geldhof, Lieven Vandevelde and
Ren´e K. Boel
Australia
Belgium
XVII International Conference on Electrical Machines
Minoa Palace Hotel, Chania, Crete Island, Greece, September 2 – 5, 2006
Web-site: http://www.ntua.gr/ICEM2006/
11:40-13:20 ORAL SESSION OTM3: TRANSFORMERS
Tuesday, September 5th 2006
Athina3 Room
No
Ref
OTM3-1
281
OTM3-2
210
A Novel Approach to Reducing Inrush Current in
Power Transformer
Assessment of ELF- Magnetic Field Exposure in
Power Transformer Rooms
209
Core Effects Modeling For Three Phase
PowerTransformers
OTM3-3
OTM3-4
370
OTM3-5
533
Paper title
Authors
Time Domain Analysis of Power Transformers by a
Hybrid Quasi-Static FD – FE Technique
Characteristics of Transformer using Wound Type
of Linear Induction Motor
M.B.B. Sharifian, M. Abapour
Carlos F. R. Lemos Antunes
Jorge Pleite, Carlos Gonzalez, Juan
Vazquez, Antonio Lazaro
T. I. Kosmanis, T. V. Yioultsis and T.
D. Tsiboukis
N. Fujii, K. Hayashi and T. Mizuma
Country of the
corresponding
author
Iran
Portugal
Spain
Greece
Japan
11:40-13:20 ORAL SESSION OTM4: TESTING, MEASUREMENTS,
ACOUSTIC NOISE AND VIBRATION ASPECTS
Tuesday, September 5th 2006
Ariadne Room
No
Ref
OTM4-1
320
OTM4-2
197
Paper title
Authors
Testing of Electric Machines with a Dedicated
System for Data Acquisition and Processing
The increase of the magnetic noise of induction
motors due to the low order excitation modes
generated by the rotor eccentricity
OTM4-3
452
OTM4-4
505
Monitoring of Induction Motors Rotor Faults by non
invasive sensors
Acoustic Noise and Displacement Analysis of a 3phase Transformer Core Under Sinusoidal and
PWM Excitations
546
Optimal Design to reduce Acoustic Noise in Interior
Permanent Magnet Motor using Response Surface
Methodology
OTM4-5
13:20-14:30 Lunch at Minoa Palace Restaurant
27/34
Voicu Groza, Marius Biriescu,
Vladimir Creţu, Gheorghe Liuba,
Marţian Moţ , Gheorghe Madescu
S.L. Nau, R. Beck, H.L.V. dos
Santos, N. Sadowski, R. Carlson
A. Bellini, C. Concari, G.
Franceschini, C. Tassoni, A. Toscani
X G Yao, Thant P P Phway, A J
Moses, F Anayi
Sang-Ho Lee, Ji-Young Lee, SukHee Lee, Jung-Pyo Hong, and
Young-Kyoun Kim
Country of the
corresponding
author
Romania
Brazil
Italy
UK
Korea
XVII International Conference on Electrical Machines
Minoa Palace Hotel, Chania, Crete Island, Greece, September 2 – 5, 2006
Web-site: http://www.ntua.gr/ICEM2006/
14:30-15:40 POSTER (DIALOGUE) SESSION PTA1: POWER GENERATION
BY RENEWABLE SOURCES - FLYWHEELS
Tuesday, September 5th 2006
No
Ref
PTA1-1
389
PTA1-2
356
PTA1-3
429
PTA1-4
PTA1-5
432
441
PTA1-6
428
PTA1-7
547
PTA1-8
593
Paper title
Authors
Analysis of a PM Generator-Rectifier System for
Wind Energy Applications
Combined Field and Circuit Theory for Non Linear
Material Applied on Wind Turbine Generators
Modeling a Fuel Cell Generator set for DC
Transient-State studies
Study and Accomplishment of a checked model for
an Outer-Rotor PM Synchronous Generator for
Wind Turbines
PTA1-9
597
PTA1-10
607
PTA1-11
651
Condition Monitoring of Wind Turbine Drive Trains
Contribution of wind farms to active and reactive
power control requirements set by system operator
Genetic Algorithm Model for Profit Maximization of
Generating Companies in Deregulated Electricity
Markets
Simulation and control of a variable speed wind
turbine equipped with a multi-pole synchronous
generator
Reliability and Economic Evaluation of Small
Autonomous Power Systems containing only
Renewable Energy Sources
Use of a variable-reluctance magnet machine
(VRMM) for a direct driven wind generator.
Analytical design
Torque and Speed Control of Pitch Regulated
Doubly Fed Induction Generator
785
Dynamic Modelling of an Experimental Power
Plant from Sea Waves
PTA1-13
814
Control Considerations for a Grid Connected
Variable Speed Wind Turbine
PTA1-14
283
PTA1-15
182
PTA1-16
616
PTA1-12
Simulation Models of Fuel Cell Systems
Stabilization of rotor shaft of fly wheel energy
storage system by controlling armature currents of
motor generator
Design considerations for die-cast rotor inductionmotors operating at a speed of 30.000 rpm
PTA1-17
301
PTA1-18
315
PTA1-19
364
Short Time Voltage Build up Method of Induction
Generator for Flywheel UPS
Frequency Stabilization of Small Power System by
using Flywheel Energy Storage System
Experimental Performance Evaluation of a High
Speed Permanent Magnet Synchronous Motor and
Drive for a Flywheel Application at Different
Frequencies
473
On starting-up large power motors rotating high
inertia loads in autonomous systems
699
Wind Diesel System for DC bus coupling with
Battery and Flywheel Storage
PTA1-20
PTA1-21
28/34
M. Andriollo, G. Bettanini, A. Morini,
G. Martinelli, A. Tortella
Country of the
corresponding
author
Italy
Oliver Drubel, Sven Exnowski
Germany
G. Petropoulos, J. Prousalidis
Greece
A. Olano, V. Moreno, J. Molina, I.
Zubia
M. R. Wilkinson and P. J. Tavner
Spain
UK
I. Zubia, X. Ostolaza
Spain
P.Georgilakis
Greece
S. Papaefthymiou and S.
Papathanassiou
Greece
Yiannis A. Katsigiannis, Pavlos S.
Georgilakis
Greece
I Mény, J.R. Didat, P. Enrici, D. Matt
France
Bouaouiche T, Machmoum M
C.M. Pournaras, N.M. Kimoulakis,
A.G. Kladas and J.A. Tegopoulos
Antonios E. Haniotis, Antonios G.
Kladas and John A. Tegopoulos
Chiara Boccaletti, Gerardo Duni,
Gianluca Fabbri, Ezio Santini
France
O. Tsukamoto, A. Utsunomiya and T.
Fu
M. Centner, R. Hanitsch
Takeshi Shibayama, Ismet Rahmad
Kartono, Hideo Dohmeki
Rion Takahashi, Junji Tamura
A.S. Nagorny
P. Vallianatos, J. Prousalidis and E.
Styvaktakis
M. El Mokadem, C. Nichita, P.
Reghem and B. Dakyo
Greece
Greece
Italy
Japan
Germany
Japan
Japan
USA
Greece
France
XVII International Conference on Electrical Machines
Minoa Palace Hotel, Chania, Crete Island, Greece, September 2 – 5, 2006
Web-site: http://www.ntua.gr/ICEM2006/
14:30-15:40 POSTER (DIALOGUE) SESSION PTA2: VARIABLE
RELUCTANCE MACHINES
Tuesday, September 5th 2006
No
Ref
Paper title
PTA2-1
143
PTA2-2
208
PTA2-3
226
Developing an Iron Loss Model for SR Machines
A New and Fast Design Methodology for a New
Linear Switched Reluctance Motor Taking
Performance Evaluation and Track Constraints into
account
Dynamic Performance Analysis on Switched
Reluctance Motors and Iron Loss Calculation using
the Finite Element Method
240
Design and Analysis of a SRM for a Hybrid Electric
Vehicle
PTA2-4
Authors
PTA2-5
286
PTA2-6
300
PTA2-7
309
PTA2-8
241
PTA2-9
425
PTA2-10
479
PTA2-11
564
Performance Estimation of Switched Reluctance
Motor by Using Decision Tree Learning Algorithms
Consideration of 8/6 Switched Reluctance
Generator Excited by Suppression Resider
Converter
Reluctance Network Analysis of an SR motor
Considering Iron loss characteristics and Optimum
Direction of the Excitation
Effect of Space Harmonics on the Transient and
Steady-State Behavior of a Line-Start Synchronous
Reluctance Machine
Optimization of the size of the meshed zone for the
coupling FEM-PNM: Example on a switched
reluctance motor
Rotor cage currents during line-start of 3 phase
synchronous reluctance motor
Assessment of Linear Variable Reluctance Motor
Performance Limits via Finite Element Modeling
PTA2-12
530
Saturated Double Salient Reluctance Motors
PTA2-13
534
Rotor Design on Torque Ripple Reduction for a
Synchronous Reluctance Motor with Concentrated
Winding using Response Surface Methodology
PTA2-14
536
Anisotropy Rotor Design of Synchronous
Reluctance Motor Using a Coupled FEM &
Preisach Model
PTA2-15
537
PTA2-16
558
Rotor design functional standard of Synchronous
Reluctance Motor according to torque/volume using
FEM & SUMT
Nonlinear Magnetic Circuit Model of a Linear
Variable Reluctance Motor Using Boundary
Element Methods
PTA2-17
573
PTA2-18
619
PTA2-19
657
Effects on Reducing Torque Ripple of SR Motors
Using Freewheeling Mode
An analytical approach to the magnetizing
inductance computation for the synchronous
reluctance motor with axially laminated rotor
On The Performance improvement of a Low Speed
Switched Reluctance Machine With Permanent
Magnet Excitation
PTA2-20
668
Using Salient AC Machines as Virtual Resolvers
29/34
J. T. Charton, J. Corda, J. M.
Stephenson and S. P. Randall
D.S.B. Fonseca, C.P. Cabrita and
M.R.A. Calado
Alexandros Michaelides and Christos
Mademlis
Jaewon Moon, S. J. Salon, Lale
Ergene
Behzad Mirzaeian Dehkordi, Reza
Zafarani, Payman Moallem
Country of the
corresponding
author
UK
Portugal
UK
USA
Iran
A. Takahashi, H. Goto and O.
Ichinokura
Japan
K. Nakamura, S. Fujio, and O.
Ichinokura
Japan
T. Lubin, T. Hamiti, H. Razik and A.
Rezzoug
France
Binjie Dong, Fabien Sixdenier,
Laurent Morel, Benjamin Guinand
France
D. Miljavec, B. Zidaric M. Zagirnjak
Slovenia
Raga Ahmed and David G. Taylor
Chang J H, Kang D H, Viorel I-A,
Tomescu Ilinca, Strete Larisa
Jung-Min Park, Seong-June Park,
Min-Myung Lee, Jang-Sung Chun
,Jung-Ho Lee
Rae hwa Lee, Su Jin Jeon,Sun Bum
Kwon, Jang Sung Chun, Min Myung
Lee and Jung Ho Lee,
Rae hwa Lee, Su Jin Jeon,Sun Bum
Kwon, Jang Sung Chun, Min Myung
Lee and Jung Ho Lee
Nattapon Chayopitak and David G.
Taylor
Mirai Sato, Hiroki Goto, H. J. Guo,
Osamu Ichinokura
I.Torac
R.Saou, K. Alitouche,M.E.Zaim
A. Consoli, G. Scarcella, G. Scelba,
A. Testa, D. Triolo
USA
Korea
Korea
Korea
Korea
USA
Japan
Romania
France
Italy
XVII International Conference on Electrical Machines
Minoa Palace Hotel, Chania, Crete Island, Greece, September 2 – 5, 2006
Web-site: http://www.ntua.gr/ICEM2006/
14:30-15:40 POSTER (DIALOGUE) SESSION PTA3: THEORY, MODELING
AND SIMULATION
Tuesday, September 5th 2006
No
PTA3-1
PTA3-2
Ref
Paper title
112
Volume and Surface Force Densities of Interacting
Electromagnetic and Mechanical Sub–Systems and
their Visualization
132
Shielding Effectiveness of Static and Low
Frequency Electric and MagneticFields
PTA3-3
139
PTA3-4
146
PTA3-5
150
PTA3-6
184
PTA3-7
195
PTA3-8
271
PTA3-9
381
PTA3-10
454
PTA3-11
680
PTA3-12
481
PTA3-13
483
PTA3-14
484
PTA3-15
503
PTA3-16
515
PTA3-17
520
PTA3-18
PTA3-19
567
722
PTA3-20
634
PTA3-21
142
PTA3-22
222
Authors
The electromagnetic field as a base for
determination of the main AC machines parameters
Analysis of Rotating Magnetic Device by Surface
Current method
The Partial Element Equivalent Circuit – PEEC –
modelling : the problem of capacitance integration
Space phasor diagrams and equivalent circuits to
analyze synchronous machines steady states
Space Vector Modulation in abc Coordinates:
Simplifing the Algorithm
3D Field-Circuit Coupled Finite Element Analysis of
a Plunger Core Reactor
Analysis of Field Currents and Reactances for
Adjustable-Speed Pumped-Storage Generators
Considering Rotor Duct Pieces
Structure-Dynamic Analysis of an Induction
Machine with Eccentric Rotor Movement
Multiple Coupled Circuit Modeling of squirrel-cage
Induction Motors Including Space Harmonics and
Line Neutral Voltage
Automatic Simulating System of Gearbox Service
Load
Dysfunctions of rotating magnetic density sorters
induced by the distribution of the magnetic field and
the dynamic behavior of particles
Availability Analysis of 700 kVA Generating set
Using FMECA and Fault Tree Methods
Differential Leakage Reactance in Multiphase
Induction Machines
High performance 2D finite element modelling of
rotating electrical machines
Combined 2D – 1D Time-Harmonic Model for
Analysis of Rotating Electrical Machines
Instantaneous Electromagnetic Torque/Force
Estimation in Electrical Motors using the Finite
Element Method – a Review
AC Tacho-Generator Finite element analysis
Utilization of rotating magnetic field as power tool in
electromagnetic nondestructive evaluation
Induction Motor Model for Taking Into Account
Additional Losses
3-Dimensional Calculation of the Magnetic Field in
the End Region of Hydrogenerators at Various
Steady-State Operation Conditions
30/34
Country of the
corresponding
author
C. Grabner
Jordi-Roger Riba, Xavier Alabern
Morera
Janush B. Danilevich, Irina Yu.
Kruchinina, Yuvenaliy Ph. Khozikov
Germany
M. Arehpanahi and J. Milimonfared
Iran
C. Gillot, R. Scorretti and G. Rojat
Miguel Angel Rodriguez Pozueta,
Luis Fernando Mantilla Penalba
France
G. Varsamis, A. Safacas
Greece
Erich Schmidt, Peter Hamberger
Austria
K. Shima, K. Ide, M. Takahashi, M.
Okada, and O. Nagura
C. Schlensok, D. van Riesen, K.
Hameyer
F. Babaa, M.E.K. Oumaamar, A.
Khezzar and M. Boucherma
Spain
Russia
Spain
Japan
Germany
V. Dynybyl, P. Žák
Algeria
Czech
Republic
J.P. Vilain, S. Vivier
France
B. Nadji
Algeria
G. Joksimovic
C. Doucet, G. Lacombe, I.
Charpentier, J.-L. Coulomb, C.
Guérin
Serbia
France
J. Pippuri and A. Arkkio
Finland
M. Popescu, D. G Dorrell and M. I.
McGilp
Virgiliu Fireteanu, Oana Turcanu
Raimond Grimberg, Lalita Udpa,
Adriana Savin, Rozina Steigmann,
Alina Bruma, Satish S.Udpa
A. Boglietti, A. Cavagnino, M. Lazzari
Georg Traxler-Samek, Alexander
Schwery and Daho Taghezout
UK
Romania
Romania
Italy
Switzerland
XVII International Conference on Electrical Machines
Minoa Palace Hotel, Chania, Crete Island, Greece, September 2 – 5, 2006
Web-site: http://www.ntua.gr/ICEM2006/
14:30-15:40 POSTER (DIALOGUE) SESSION PTA4: MONITORING AND
DIAGNOSTICS
Tuesday, September 5th 2006
No
Ref
Paper title
PTA4-1
179
Diagnosis of Broken Bars in Large Induction Motors
by Leakage Flux Perturbation
PTA4-2
186
PTA4-3
224
PTA4-4
331
PTA4-5
392
PTA4-6
422
PTA4-7
430
PTA4-8
462
PTA4-9
466
PTA4-10
502
PTA4-11
600
PTA4-12
628
PTA4-13
666
PTA4-14
738
Authors
Fault Diagnostics of Voltage-Fed Inverter System
for Induction Motor Drive-A Review
Detection of mechanical faults in asynchronous
machines based on wavelet analysis of the stator
current
Induction Motors Bearing Failures Detection and
Diagnosis Using a RBF ANN Park Pattern Based
Method
Time Stepping Finite Element Analysis of Rotor
Broken Bars Three-phase Squirrel-cage Induction
Motor
Intelligent Fault Diagnosing of Bearings in Rotating
Machinery (a Novel Approach)
Induction Motor Broken Bar Diagnosis by
Simultaneous Current and Vibration Sampling
Synchronous Machine Diagnosis Using an External
Magnetic Flux Sensor
Real Behavior of Induction Motor Bar Breakage
Indicators and Mathematical Model
Instantaneous Real Power Signature Analysis as a
Tool for Airgap Eccentricity Diagnostics in ThreePhase Induction Motors
Practical Evaluation of the Welch, Burg and
Multiple Signal Classification Methods applied to
the Detection of Rotor Broken Bars of Induction
Motors
Assessment of Bar Current in Induction Machines
with Broken Bars Using a Multi-Sliced Fınite
Element Model
A comparative investigation of electrical
parameters for fault detection and condition
monitoring in induction motors - stator winding
current and electromagnetic flux
Analysis and diagnosis of induction motor faults in
high-performance drives
PTA4-15
679
PTA4-16
686
PTA4-17
700
PTA4-18
701
PTA4-19
711
PTA4-20
665
PTA4-21
675
PTA4-22
681
Diagnostics of Broken Rotor Bars in Induction
Machines Using the Neutral Voltage
Detection of the Combination of Static and
Dynamic Air gap Eccentricity in 3-Phase Induction
Motors using Stator Current Monitoring
Comparative Study of Voltage Sag Effects on
Complete and Reduced-Order, Single and DoubleCage Models of Induction Motor
Impact of harmonic voltage distortion on the
voltage sag behaviour of adjustable speed drives
Diagnostic System for On-line Monitoring of
Induction Motor Drives
Analysis of an Axial flux PM Machine with Field
Weakening Capability under Symmetric Fault
Condition
Design Characteristics of a Real Time Fault
Classifier for Generators and Transformers in
Power Plants
Comparative Study between Inter-turn ShortCircuits and Unbalanced Voltage Supply in
Induction Machines
561
Low Frequency Filtering for the Diagnosis of Cage
Asymmetries in Induction Machines
PTA4-23
31/34
C.G. Dias, I.E. Chabu, J.R. Cardoso
Ibrahim F. El-Arabawy, Mahmoud
Masoud, Mohamed A. Awadallah and
Gamal M. Mahmoud
Country of the
corresponding
author
Brazil
Egypt
I. Tsoumas, E. Mitronikas, A.
Safacas
Greece
I.Y. Önel, I. Şenol and M.E.H.
Benbouzid
France
Jawad Faiz and B.M. Ebrahimi
Alireza Sadoughi, Soheil Tashakkor,
Mohammad Ebrahimi
Iran
M. Ebrahimi, A. Sadoughi, M. Bayat
D. Thailly, R. Romary, J.-Ph.
Lecointe, J. F. Brudny, P. Suau
Iran
Iran
France
C. Bruzzese - O. Honorati - E. Santini
Italy
M’hamed Drif A. J. Marques Cardoso
Portugal
Luís A. Pereira, Dênis Fernandes,
Daniel S. Gazzana, Fausto B. Líbano
Brazil
P. J. Holik and D. G Dorrell
UK
M. Negrea, P. Jover, A. Arkkio
Finland
S. M. A. Cruz, A. J. M. Cardoso
M.E.K. Omaamar, F. Babaa, A.
Khezzar and M. Boucherma
Portugal
Irahis Rodriguez, Roberto Alves
Venezuela
H. Martín, J. Pedra, J. Llaverías, R.
Bargalló
Algeria
Spain
K. Stockman, J. Desmet, R. Belmans
Belgium
R. Fiser, M. Bugeza, H. Lavric
Slovenia
Álvaro Letelier, Juan A. Tapia, Rogel
Wallace, Anibal Valenzuela
C.C. Kontogiannis, A.N.Safacas
F. Babaa, M. Y. Kaikaa, A. Khezzar
and M. Boucherma
J. A. Antonino, J. Rusek, M. Riera, J.
Roger-Folch
Chile
Greece
Algeria
Spain
XVII International Conference on Electrical Machines
Minoa Palace Hotel, Chania, Crete Island, Greece, September 2 – 5, 2006
Web-site: http://www.ntua.gr/ICEM2006/
14:30-15:40 POSTER (DIALOGUE) SESSION PTA5: THERMAL
PHENOMENA AND COOLING
Tuesday, September 5th 2006
No
Ref
Paper title
Authors
PTA5-1
158
PTA5-2
159
PTA5-3
160
The temperature distribution of the stator bar in the
evaporative cooling system of the large hydrogenerators
A Thermal Hydraulic Model and its Application on
Electrical Machines
Dynamic thermal analysis of an induction
servomotor with coupled electromagnetic-thermal
model
194
Drive of Nonconvectional Stator Winding Slot
Cooling by Water
PTA5-4
PTA5-5
236
PTA5-6
324
Cooling and Thermal Modelling Aspects of Tooth
Coil, Permanent Magnet Synchronous Machines
A Novel Lumped Parameter Thermal Model for
Electrical Machines
418
Investigation of the Thermal Behavior of a Salient
Pole Synchronous Machine
PTA5-7
PTA5-8
474
PTA5-9
494
PTA5-10
559
PTA5-11
707
CFD Validation and Air Cooling Design
Methodology for Large Hydro Generators
Measurements of Thermal Resistance on Readymade Induction Motors
Thermal Analysis of a Linear Permanent-Magnet
Motor with Concentrated Windings
Thermal characterisation of electrical steels and
thermal sensitivity analysis of a 7.5 kW induction
machine
Country of the
corresponding
author
Feihui Liu, Lin Ruan, Guobiao Gu
China
F. Bachinger, P. Hamberger
Austria
J. Puranen, J. Pyrhonen
R. Vlach
A. Di Gerlando, G. M. Foglia, R.
Perini, M. Ubaldini
G. Dajaku, D. Gerling
H. Lang, C. Kral, A. Haumer, H.
Kapeller, M. Haigis, R. Schulz
R. Dépraz, F. Avellan,A. Schwery, R.
Zickermann
Jerzy Mukosiej
Nattapon Chayopitak and David G.
Taylor
E. Hoferlin, B. Soenen, M. De Wulf,
S. Jacobs
Finland
Czech
Republic
Italy
Germany
Austria
Switzerland
Poland
USA
Belgium
15:40-16:00 Coffee Break
16:00-17:40 ORAL SESSION OTA1: POWER GENERATION BY RENEWABLE
SOURCES
Tuesday, September 5th 2006
Athina1 Room
No
Ref
Paper title
Authors
OTA1-1
111
A new approach for securing efficient operation of a
water-pumping system fed by a PV generator
OTA1-2
376
OTA1-3
705
High efficient the load dispersion a new PV
tracking system
A Maximum Power Point Tracking algorithm for
photovoltaic power systems with the control of the
output voltage
Demetrios P. Papadopoulos, Sotirios
B. Skretas
Hyung-lae Choi, Sung-jun Park, Haekon Nam, Joon-Ho choi, Chae-ju
Moon
256
Control of Linear Electrical Generators for Direct
Drive Wave Energy Conversion
461
Design methodology of an electromagnetic
generator for wave energy conversion
OTA1-4
OTA1-5
32/34
F. Esposito, S. Meo, L. Piegari
J.K.H. Shek, D.E. Macpherson, M.A.
Mueller
M. Ruellan, H. Ben Ahmed, B.
Multon, A. Babarit, A. Clement
Country of the
corresponding
author
Greece
Korea
Italy
UK
France
XVII International Conference on Electrical Machines
Minoa Palace Hotel, Chania, Crete Island, Greece, September 2 – 5, 2006
Web-site: http://www.ntua.gr/ICEM2006/
16:00-17:40 ORAL SESSION OTA2: VARIABLE RELUCTANCE MACHINES
Tuesday, September 5th 2006
Athina2 Room
No
Ref
OTA2-1
409
OTA2-2
321
Rotor Shape Design of a Switched Reluctance
Motor
Calculation of Characteristics of an SR Motor with
Divided Stator Cores Made of Grain-oriented
Silicon Steel
410
Multi-Objective Optimal Design of Linear Variable
Reluctance Motors Using Genetic Algorithms
OTA2-3
OTA2-4
608
OTA2-5
501
Paper title
Authors
The Use of Segmental Rotors for 2 Phase FluxSwitching Motors
Design of High Performance Synchronous
Reluctance Motors by Finite Element Analysis and
Optimization Algorithm: Prototype And Test
I. Gourragui, F. Léonard, G. Abba,
and J-C. Vivalda
K. Murota, K. Nakamura, and O.
Ichinokura
Matthew B. Hortman, Nattapon
Chayopitak, and David G. Taylor
B.C. Mecrow, T.J. Bedford, J.
Bennett and T. Celik
E. Chiricozzi, F Parasiliti, M. Tursini,
M. Villani
Country of the
corresponding
author
France
Japan
USA
UK
Italy
16:00-17:40 ORAL SESSION OTA3: THEORY, MODELING AND
SIMULATION
Tuesday, September 5th 2006
Athina3 Room
No
Ref
OTA3-1
228
Paper title
Authors
A simulation tool linking hydroelectric production
sites and electrical networks
OTA3-2
308
OTA3-3
576
OTA3-4
713
Simulation of Small Hydro Generators in Islanding
Operation in weak Distribution Networks
Finite Element Assisted Study of Magnetic
Configurations of Flat Pickups for Inductively
Coupled Power Transfer Systems
Generalized Analysis of Electromechanical Devices
Using Pseudo-Linear Transformations
718
Theoretıcal Analysıs of the ELCID Method Usıng
QuıckFıeld FEA package
OTA3-5
33/34
J.-J. Simond, Ph. Allenbach, C.
Nicolet, F. Avellan
A. Dagoumas, A. Marinopoulos, G.
Papagiannis, P. Dokopoulos
Country of the
corresponding
author
Switzerland
Greece
D. Kacprzak, J. K. Sykulski
UK
P. Bolognes
V. M. Gandshu, V.V.Gorodov, S.D.
Dubitsky, V.G. Podnos
Italy
Canada
XVII International Conference on Electrical Machines
Minoa Palace Hotel, Chania, Crete Island, Greece, September 2 – 5, 2006
Web-site: http://www.ntua.gr/ICEM2006/
16:00-17:40 ORAL SESSION OTA4: LOSSES, THERMAL PHENOMENA AND
COOLING
Tuesday, September 5th 2006
Ariadne Room
No
Ref
OTA4-1
622
OTA4-2
624
OTA4-3
117
OTA4-4
380
OTA4-5
688
Paper title
Authors
On stator yoke rotational iron losses in permanent
magnet machines
Analysis of the core loss data fitting alternatives for
induction motor loss computation
Experimental Approach to the End-Windings
Cooling Effects in Induction Motors
Comparison of Measurements with a CFD Analysis
and a Thermal Equivalent Circuit Model of a TEFC
Induction Machine
A Complex Space Vector Approach to Rotor
Temperature Estimation for Induction Machines
with Impaired Cooling and Unbalanced Supply
T. Modeer
P. Arboleya, G. Díaz, C. GonzálezMorán, J. Gómez-Aleixandre
A. Boglietti, A. Cavagnino
Country of the
corresponding
author
Sweden
Spain
Italy
C. Kral, A. Haumer, M. Haigis, H.
Lang, H. Kapeller
Austria
Zhi Gao, Thomas G. Habetler and
Ronald G. Harley
USA
17:50-18:30 CLOSING CREMONY AND CONCLUDING REMARKS
Tuesday, September 5th 2006
Athina1 Room
34/34