2010 XIX International
Conference on Electrical
Machines
(ICEM 2010)
Rome, Italy
6-8 September 2010
Pages 1-830
IEEE Catalog Number:
ISBN:
1 / 4
CFP1090B-PRT
978-1-4244-4174-7
TABLE OF CONTENTS
The Dynamic Interaction of Independent Power Producer Synchronous Machines Connected to a Distribution
Network in ATP-EMPTF .................................................................................................................................................................................. 1
A. M. Moura, J. R. Camacho, M. L. R. Chaves, G. C. Guimarães
Detection of Inter-coil Short Circuits in Synchronous Machine Armature Winding on the Basis of Analysis of
Machine Magnetic Field .................................................................................................................................................................................... 7
Ante Elez, Stjepan Car, Zlatko Maljkovic
Simulation of Wind Power Generation with Fractional Controllers: Harmonics Analysis..................................................................... 13
R. Melício, V. M. F. Mendes, J. P. S. Catalão
FEM Study of Asynchronous Cage Motors Combining NEMA’s Classes A and D Slot Geometry ....................................................... 18
Kostas Gyftakis, Joya Kappatou, Athanasios Safacas
Salient Pole Shoe Shapes of Interior Permanent Magnet Synchronous Machines ................................................................................... 24
Steven A. Evans
The Rotating Field Method Applied to Damper Loss Calculation in Large Hydrogenerators ............................................................... 30
M. Ranlöf, U. Lundin
A New Space Vector Modulation Strategy for Multilevel Inverters........................................................................................................... 36
E. D. Karatsivos, G. A. Adamidis, T. G. Nathenas
Rotor Fault Detection of Induction Motors by Sensorless Irregularity Revolution Analysis.................................................................. 43
Ivan Jaksch, Jan Zalud
Considerations Regarding the Behaviour of Power Transformers in Transient Regimes at No-load and Shortcircuit Connection ............................................................................................................................................................................................ 49
Eng. G. Curcanu
Study of a Simple Control Strategy for Grid Connected VSI Using SVPWM and p-q Theory .............................................................. 53
Georgios A. Tsengenes, Georgios A. Adamidis
Induction Motor Response to Periodical Voltage Fluctuations................................................................................................................... 59
Jose Baptista, Jose Goncalves, Salviano Soares, Antonio Valente, Raul Morais, Jose Bulas-Cruz, Manuel J. C. S. Reis
Variable Voltage Variable Frequency Control of Tubular Linear Permanent Magnet Synchronous Machine for
Drilling Applications ........................................................................................................................................................................................ 65
Shujun Zhang, Lars Norum, Robert Nilssen
Analytical Design of a High-Torque Flux-Switching Permanent Magnet Machine by a Simplified Lumped
Parameter Magnetic Circuit Model ............................................................................................................................................................... 70
Anyuan Chen, Robert Nilssen, Arne Nysveen
Multi-Physical QuasiStatic Modelling of an Axial Flux Permanent Magnet Machine ............................................................................ 76
O. Maloberti, C. Marchand, Y. Choua, D. Condamin, L. Kobilansky, E. Bomme
Sensorless Control Strategy for Permanent Magnet Synchronous Motor Fed By AC/DC/AC Converter ............................................ 82
F. Benchabane, A.Titaouine, O. Bennis, K. Yahia, D. Taibi
Proposal of 3D-Stator Structure Using Soft Magnetic Composite for PM Motor .................................................................................... 88
Yoshiki Okada, Hideo Dohmeki, Shinji Konushi
A Nonlinear Observer-Based Fault Tolerant Concept in IPMSM Drive................................................................................................... 94
H. Nademi, B. Moghimian Hoosh, L. Norum
DC-Bus Utilisation in Series-Connected Multi-Phase Machines Supplied from a VSI with a Composite Phase
Number ............................................................................................................................................................................................................ 100
D. Dujic, M. Jones, E. Levi, O. Lopez
Assessment of Fractional and Small Power Three Phase Induction Motors for Conveyor Applications ............................................ 106
A. Boglietti, A. Cavagnino, S. Jennings, M. Popescu, D. A. Staton
Exit End Effect Reduction of a Linear Induction Motor for the Deep-underground GTX................................................................... 112
H.-W. Lee, C. B. Park, B. S. Lee, H.-J. Park
A Study on the Design and Characteristic Analysis of LIM for the Deep-underground GTX Propulsion System ............................ 116
C. B. Park, H. W. Lee, B. B. Kang, J. Lee
Stability Study of a Complete Hydroelectric Production Site by Eigenvalues Analysis Method Based on Phase
Variables.......................................................................................................................................................................................................... 121
P. C. O. Silva, B. Kawkabani, S. Alligné, C. Nicolet, J.-J. Simond, F. Avellan
Efficiency Determination Taking Into Account the Sensitivity of Losses and Measurement System .................................................. 127
R. Bargalló, J. Sust, J. Moron, J. C. Pujolras
Thermal Analysis of a High-Speed PM Machine Using Numerical and Thermal-Network Method ................................................... 132
Z. Kolondzovski, P. Sallinen, A. Arkkio
Transformer Design as a Key for Efficiency Optimization ....................................................................................................................... 138
Joseph El Hayek
Design and Analysis of a Brushless Doubly Fed Induction Machine with Rotary Transformer .......................................................... 142
M. Ruviaro, F. Rüncos, N. Sadowski, I. M. Borges
High Performance Direct Driven Hydroelectric Generators for Mini-Micro Power Stations .............................................................. 148
M. De Bortoli, M. Groppo, G. Stanic
Determination of Air-Gap Flux Density due to Magnets using the New Analytical Model................................................................... 154
Gurakuq Dajaku, Dieter Gerling
Theory of the Doubly-Fed Induction Machine in the Steady State........................................................................................................... 160
T. J. E. Miller
Calculation of the Armature Inductance of the Universal AC Commutator Motor .............................................................................. 166
T. J. E. Miller, M. Willig
Improved Lumped Parameter Thermal Model and Sensitivity Analysis for SR Drives........................................................................ 172
Q. Yu, C. Laudensack, D. Gerling
Alternator Contribution to CO2 Emission Reduction Policies ................................................................................................................. 178
Ludovic Doffe, Mostafa Kadiri
Toroidally Wound Induction Machines ....................................................................................................................................................... 183
Bogi B. Jensen, Alan G. Jack
Modeling and Bi-Criterial Optimization of a Line Start Permanent Magnet Synchronous Machine to Find an IE4
Class High-Efficiency Motor ......................................................................................................................................................................... 188
W. Jazdzynski, M. Bajek
Comparison of Losses and Efficiency in Alternate Flux-Switching Permanent Magnet Machines...................................................... 194
J. T. Chen, Z. Q. Zhu, S. Iwasaki, R. Deodhar
A New Design Method for the Clawpole Transverse Flux Machine. Application to the Machine No-Load Flux
optimization. Part I: Accurate Magnetic Model with Error Compensation. ......................................................................................... 200
Nicolas Dehlinger, Maxime R. Dubois
A New Design Method for the Clawpole Transverse Flux Machine. Application to the Machine No-Load Flux
optimization. Part II: Optimization Aspects. ............................................................................................................................................. 207
Nicolas Dehlinger, Maxime R. Dubois
Theoretical Modeling and Corroborative Experiments for Electro-conjugate Fluid Flow ................................................................... 214
K. Mori, H. Yamamoto, K. Takemura, S. Yokota, K. Edamura
Analysis and Classification of Bearingless Machines with Symmetric 3-Phase Concentrated Windings ............................................ 220
Wolf-Rüdiger Canders, Dennis Hülsmann
Investigation of Different Parameters on the Performance of Switched Reluctance Machines ............................................................ 226
C. Laudensack, Q. Yu, D. Gerling
Calculation of a Linear Generator for a Hybrid Vehicle Concept ........................................................................................................... 232
Frank Rinderknecht, Hans-Georg Herzog
Observer-based Speed Tracking Control for Sensorless Permanent Magnet Synchronous Motors with Unknown
Load Torque.................................................................................................................................................................................................... 237
P. Tomei, C. M. Verrelli
Influence of Magnet Thickness and Magnet Orientation on the Performance of IPMSM .................................................................... 243
F. Hetemi, G. Dajaku, D. Gerling
Bi Input-Extended Kalman Filter Based Speed-Sensorless Direct Torque Control of Ims ................................................................... 247
Murat Barut, Ridvan Demir
Eddy Current Losses in PM Canned Motors .............................................................................................................................................. 252
Y. Burkhardt, G. Huth, S. Urschel
Influence of Inverter Nonlinearity on Parameter Estimation in Permanent Magnet Synchronous Machines ................................... 259
K. Liu, Z. Q. Zhu, Q. Zhang, J. Zhang, A. W. Shen
Comparison of Analytical Models for Predicting Cogging Torque in Surface-Mounted PM Machines ............................................. 264
L. J. Wu, Z. Q. Zhu, D. Staton, M. Popescu, D. Hawkins
Grid Fault Ride-Through Capabilities of Diesel-Electric Systems ........................................................................................................... 270
C. Blome, M. De Bortoli, G. Stanic
An Induction Motor Model for Transient Simulation................................................................................................................................ 276
N. Gibo, T. Noda, K. Takenaka
Harmonic Diversity and Determining Factors of Radial Forces in External Rotor Permanent Magnet Synchronous
Motors with Concentrated Windings ........................................................................................................................................................... 282
Jens Krotsch, Bernhard Piepenbreier
A New Method to Detect Inter-Turn Short-Circuit in Induction Motors................................................................................................ 289
M. Sahraoui, S. E. Zouzou, A. Ghoggal, S. Guedidi
Analysis of a Series Augmented Railgun Launching Process.................................................................................................................... 295
Zhenchun Wang, Huiguang Li, Yintang Wen, Zaiji Zhan, Xiaoting Peng, Wenkui Wang
Modeling of Saturated Synchronous Generator Based on Steady-State Operating Data...................................................................... 299
Marin Despalatovic, Martin Jadric, Božo Terzic
The Commutator Optimization due to Electrically Caused Wear ........................................................................................................... 305
France Pavlovcic
Minimization of Energy Dissipated in Power Mechatronic System by Considering the Electric Conversion Loss............................ 311
Teruyuki Izumi, Abdul Rahim, Zuowei Li
Investigation of a Rotary-linear Switched Reluctance Motor ................................................................................................................... 317
J. F Pan, N. C. Cheung, Guang-zhong Cao
Real-time On-line Parameter Estimation of Linear Switched Reluctance Motor .................................................................................. 321
N. C. Cheung, J. F. Pan, Jin-quan Li
Proposal of a Truncatedoctahedron-Dodecahedron Based Spherical Stepping Motor.......................................................................... 326
Tomoaki Yano
Experimental Verification of Performance of a Switched Reluctance Motor Made of Permendur ..................................................... 332
Y. Hasegawa, K. Nakamura, O. Ichinokura
Influence of Model Simplifications and Parameters on Dynamic Performance of Grid Connected Fixed Speed
Wind Turbines ................................................................................................................................................................................................ 336
S. Tohidi, A. Rabiee, M. Parniani
Influence of a Delta-Connected Winding on Magnetizing Currents of a Five-Limb Core Power Transformer................................. 343
Franjo Kelemen, Leonardo Štrac, Sead Berberovic
Special Features on Synchronous Generators for Essential and Emergency Services ........................................................................... 348
M. De Bortoli, F. Savegnago, G. Stanic
A Robot Finger Using Electro-conjugate Fluid........................................................................................................................................... 353
A. Yamaguchi, K. Takemura, S. Yokota, K. Edamura
The Iron Losses Calculation in the Armature of the Electromagnetic Torque Converter .................................................................... 359
K. Walecki, K. Zakrzewski
Two-Generator-Concepts for Electric Power Generation in More Electric Aircraft Engine ............................................................... 365
K. Muehlbauer, D. Gerling
Super-Capacitors Based Hybrid Converter in Marine Electric Propulsion System .............................................................................. 370
Wenjie Chen, Alf Kåre Ådnanses, Jan Fredrik Hansen, John Olav Lindtjørn, Tianhao Tang
A Non-linear Simulation Model of an Active Magnetic Bearings Supported Rotor System ................................................................. 376
S. Myburgh, G. van Schoor, E. O. Ranft
Sensorless Electric Traction Drive with 500 Nm Outer Rotor Permanent Magnet Synchronous Machine ........................................ 382
Florian Demmelmayr, Andreas Eilenberger, Manfred Schroedl
Starting Winding Optimization in Single-Phase Induction Motor Design .............................................................................................. 389
D. Lin, P. Zhou, N. Lambert
Critical Wavelength of Eddy Currents and Its Influence on Harmonic Losses in Solid Poles.............................................................. 395
Yujing Liu
Hardware Emulation of Transverse Flux Machines Based on an Analytical Model Considering Saturation Effects ....................... 401
Manuel Gartner, Nejila Parspour, Tobias Burgstaller
Fractional Horsepower DC Motor Tests in Virtual Laboratory by Internet Access.............................................................................. 407
A. Váradi, L. Szentirmai, T. Szarka
Case Studies of Acoustic Noise Emission from Inverter-Fed Asynchronous Machines ......................................................................... 413
H. Tischmacher, I. P. Tsoumas, B. Eichinger, U. Werner
Fuel Cell Power Regulation Based-on Differential Flatness Theory for High-Power Converter Applications................................... 421
Phatiphat Thounthong, Suwat Sikkabut, Panarit Sethakul, Serge Pierfederici, Bernard Davat
Application of Feed Forward Control in the Excitation System of Pulse Rectified Generator............................................................. 427
Xiaofei Zhai, Weiming Ma, Dezhi Liu, Bin Ouyang
Permanent Magnet Brushless Drives Controlled by Sensorless Predictive Algorithm .......................................................................... 431
G. Brando, A. Del Pizzo, G. Gatto, I. Marongiu, A. Serpi
Comparison of Radial Vibration Forces in 10-pole/12-slot Fractional-Slot Surface-mounted and Interior PM
Brushless AC Machines ................................................................................................................................................................................. 437
Z. P. Xia, Z. Q. Zhu, L. J. Wu, G. W. Jewell
Recommendations to Improve the Efficiency of Drying Processes in Power Transformer ................................................................... 443
Diego F. Garcia, Belen Garcia, Juan Carlos Burgos
Brushless DC Motor with a Bonded Permanent Magnet and Powder Magnetic Core .......................................................................... 449
M. Przybylski, B. Slusarek, J. Gromek
MEMS-based Tube-type Micropump by Using Electro-conjugated Fluid (ECF) .................................................................................. 453
J.-W. Kim, T. V. X. Nguyen, S. Yokota, K. Edamura
A Robust Position Control for Induction Machines ................................................................................................................................... 458
Oscar Barambones, Jose Maria Gonzalez de Durana, Luis Miguel Camarero
Comparison of Non-Overlap Winding Radial Flux PM Hub Drives for Evs .......................................................................................... 464
Arnold J. Rix, Maarten. J. Kamper
Effect of PMSM Sizing on the Energy Efficiency of an Electro-Hydraulic Forklift............................................................................... 470
T. A. Minav, P. A. Immonen, J. J. Pyrhönen, L. I. E. Laurila
A New Sensorless Torque and Reactive Power Controller for Doubly-Fed Machines........................................................................... 476
Hamza Chaal, Milutin Jovanovic
Bearing Currents in Converter Operation .................................................................................................................................................. 482
H. Tischmacher, S. Gattermann
Prediction of Motor Bearing Currents for Converter Operation ............................................................................................................. 490
M. Kriese, E. Wittek, S. Gattermann, H. Tischmacher, G. Poll, B. Ponick
Capacitances and Lubricant Film Thicknesses of Motor Bearings Under Different Operating Conditions....................................... 496
E. Wittek, M. Kriese, H. Tischmacher, S. Gattermann, B. Ponick, G. Poll
Transmission Torque Characteristics in a Magnetic Gear........................................................................................................................ 502
Noboru Niguchi, Katsuhiro Hirata, Masari Muramatsu, Yuichi Hayakawa
Steady and Dynamic Performance Analyses of a Linear Induction Machine ......................................................................................... 508
Wei Xu, Jianguo Zhu, Yongchang Zhang, Youguang Guo, Guangyong Sun
Modeling and Parameter Measurement Scheme For Double Primaries Coupling Linear Induction Motors .................................... 514
Zhaolong SUN, Weiming MA, Dezhi LIU, Junyong LU, Jin XU, Yuxing ZHANG
Theoretical and Technological Aspects on the Inverse Structure in the Fields of High Speed Electric Machines ............................. 519
M. Ignat, T. Paraschiv, I. C. Haraguta,V. Stoica
A Novel Sensorless Control of PMSG Based On Sliding Mode Observer ............................................................................................... 525
Fei Xiao, Hao-xiong Wang, Min-liang Chen, Yong Liu
DTC IM Drive Losses – Simulation and Measurements............................................................................................................................ 529
L. Aarniovuori, L. Laurila, M. Niemelä, J. Pyrhönen
Design of a Novel Air-Cored Permanent Magnet Linear Generator for Wave Energy Conversion .................................................... 535
Rieghard Vermaak, Maarten J. Kamper
Service Continuity of an Induction Machine Railway Traction System .................................................................................................. 541
Tahar Achour, Maria Pietrzak-David, Marcel Grandpierre
New Type of Starters...................................................................................................................................................................................... 548
V. Hajek, H. Kuchynkova
DC Motor Speed Regulation Using Repetitive Control.............................................................................................................................. 553
Wei Wu
Start-up and Synchronization of a Variable Speed Pump-Turbine Unit in Pumping Mode................................................................. 559
Y. Pannatier, B. Kawkabani, C. Nicolet, A. Schwery, J.-J. Simond
Predetermination of Dynamical Stresses of Asynchronous Traction Motors ......................................................................................... 565
Aurel Campeanu, Mihai Radulescu, Razvan Prejbeanu, Ioan Cautil, Toma Cimpeanu
Induction Motor Eccentricity Diagnosis Using Impedance Spectrum and Shaft Voltage ..................................................................... 571
G. G. Rogozin, D. Y. Osipov
Prospective Permanent Magnet Turbogenerator Design for Local Power Engineering........................................................................ 574
J. B. Danilevich, V. N. Antipov, I. Yu. Kruchinina, Yu. Ph. Khozikov, A. V. Ivanova
Improving the Rotor Position Estimation in Permanent-Magnet Synchronous Machines with a Low-Resolution
Position Sensor................................................................................................................................................................................................ 578
Hendrik Vansompel, Frederik De Belie, Jan Melkebeek
Dynamic Characteristics of a Linear Permanent Magnet Brushless DC Launcher by Finite-element Analysis ................................ 584
Junyong Lu, Weiming Ma, Zhaolong Sun, Jin Xu, Yuxing Zhang
Computing End-Turn Leakage Inductance of Concentric Coil Windings by Asymptotical Series Approximation of
Neumann Integrals ......................................................................................................................................................................................... 588
A. Tessarolo
A Strator Winding Design with Unequally-Sized Coils for Adjusting Air-Gap Space Harmonic Content of
Induction Machines ........................................................................................................................................................................................ 594
A. Tessarolo, M. Mezzarobba, A. Contin
Rotor Geometry Design of an Interior Permanent-Magnet Synchronous Machine for More Accurate Sensorless
Control ............................................................................................................................................................................................................. 601
Peter Sergeant, Frederik De Belie, Jan Melkebeek
Mitigation of Cross-Saturation Effects in Resonance-Based Sensorless Switched Reluctance Drives ................................................. 607
K. R. Geldhof, A. Van den Bossche, J. A. A. Melkebeek
Power Transformers Behavior Under the Occurrence of Inrush Currents and Turn-To-Turn Winding Insulation
Faults................................................................................................................................................................................................................ 613
Luís M. R. Oliveira, A. J. Marques Cardoso
A New Wind Generation System Cooperatively Controlled with Hydrogen Electrolyzer .................................................................... 620
Rion Takahashi, Yuusuke Otsuki, Junji Tamura, Masatoshi Sugimasa, Akiyoshi Komura, Motoo Futami, Masaya Ichinose,
Kazumasa Ide
Efficiency Calculation of Wind Turbine Generation System with Doubly-Fed Induction Generator ................................................. 626
Rion Takahashi, Hajime Ichita, Junji Tamura, Mamoru Kimura, Masaya Ichinose, Moto-o Futami, Kazumasa Ide
Assist Effects of Additional Permanent Magnets in Salient-Pole Synchronous Generators.................................................................. 630
Katsumi Yamazaki, Kei Ando, Kazuyoshi Nishioka, Kazuo Shima, Tadashi Fukami, Keisuke Shirai
Improved Modelling of PMSMs Taking into Account Conductive Rotor Parts ..................................................................................... 636
Kristof Vandemergel, Frederik De Belie, Tine Vandoorn, Thomas Vyncke, Philippe Lataire, Jan Melkebeek
Simulations of Fluxes in Diseased Coronary Network Using an Electrical Model ................................................................................. 642
M. Maasrani, I. Abouliatim, V. G. Ruggieri, H. Corbineau, J. Ph. Verhoye, A. Drochon
Investigation of Surface Velocity Pattern of Power Transformers Tanks ............................................................................................... 648
Alexander Hackl, Peter Hamberger
An Active Way Linear Synchronous Motor with Multiphase Independent Supply ............................................................................... 651
Tazio Beltrami, Mauro Carpita, Serge Gavin, David Moser
Fast-and-easy Acoustic Optimization of PMSM by Means of Hybrid Modeling and FEM-to-measurement Transfer
Functions ......................................................................................................................................................................................................... 657
M. van der Giet, D. Franck, R. Rothe, K. Hameyer
Study and Optimization of a Small Tubular Linear Motor with Permanent Magnet............................................................................ 663
C. Pompermaier, F. J. H. Kalluf, M. V. Ferreira da Luz, N. Sadowski
Intuitive Interface for a Quicker Electromagnetic Motor Design............................................................................................................. 669
L. G. Frigoli, A. Tassi
Force Calculation of Electric Machines with a Flat Air-Gap Using Hybrid Finite Element Mesh ...................................................... 674
Rong-Jie Wang, Maarten J. Kamper
Design of Single-Phase Induction Motors with Fully Processed Steel ...................................................................................................... 677
C. A. da Silva, G. B. Gibelli, H. D. Queiros, R. Carlson, F. J. G. Landgraf
A New Method for Calculating Iron Loss Based On Hilbert Transform................................................................................................. 681
Junquan Chen, Weiming Ma, Dong Wang, Fuhua Li, Yunjun Guo
Small Disturbance Stability Analysis of Multiphase Inverter-fed Induction Motor Drive System ...................................................... 686
Yunjun Guo, Dong Wang, Dezhi Liu, Junquan Chen
Bearing Lubrication Assessment using an Statistical Analysis of the Stator Current Spectrum.......................................................... 692
Daniel Morinigo-Sotelo, Oscar Duque-Perez, Luis Angel Garcia-Escudero, Marcelo Perez-Alonso
Generalized Representation of Transformer Electrical Steels Working Under Heavily Saturated Conditions ................................. 698
Themistoklis D. Kefalas, George Loizos, Antonios G. Kladas
A Dynamic Model for Inertia Energy Stored Generator with Rectifier System..................................................................................... 704
D. H. Guo, W. M. Ma
Investigation of a Three-Phase Flux-Switching Permanent Magnet Machine for Downhole Applications ......................................... 707
Anyuan Chen, Robert Nilssen, Arne Nysveen
Research of Zero-Crossing Detection Technology in Linear Induction Motor....................................................................................... 712
Shiguang Geng, Weiming Ma, An Hu, Weichao Li, Denghua Guo, Junyong Lu, Jianqing Shen
Feasibility Studies on On-line Monitoring of Transformer Winding Mechanical Damage Using UWB Sensors ............................... 717
M. A. Hejazi, J. Ebrahimi, G. B. Gharehpetian, R. Faraji-Dana, M. Dabir
Classification of Field-weakening Solutions and Novel PM Machine with Adjustable Excitation ....................................................... 723
H. Woehl-Bruhn, W.-R. Canders, N. Domann
A Novel Control Scheme for Double-sided Long Primary Linear Motor................................................................................................ 729
Li Weichao, Ma Weiming, Hu An, Geng Shiguang, He Na, Guo Denghua
Development of FE-based Computer-assisted Design System for Induction Machines ......................................................................... 734
Mariusz Jagiela, Krystyna Macek-Kaminska
Analysis of BLDC Motor with Zigzag and Rhombic Winding.................................................................................................................. 740
Bruno Dehez, Miroslav Markovic, Yves Perriard
Studies on Electrical Stresses in Rotating Rectifiers for Brushless Exciter............................................................................................. 745
D. R. Gomes, I. E. Chabu
Experimental Identification of Induction Motor Broken Bar Characteristic Frequencies Using a Programmable
Power Source................................................................................................................................................................................................... 751
Oscar Duque-Perez, Daniel Morinigo-Sotelo, Alicia Rodriguez-Carrascal , Luis A. Garcia-Escudero, Marcelo Perez-Alonso
Polynomial Control Strategy of the DC/DC Converter for Energy Share Between Supercapacitors and Battery............................. 757
M. B. Camara, B. Dakyo, C. Nichita
A Hybrid Stand Alone Power System for Telecom Applications in Minor Islands ................................................................................ 763
G. Fabbri, C. Boccaletti, A. J. Marques Cardoso
Characteristics in Transformer Operation Mode of Linear Motor-Transformer Apparatus .............................................................. 769
N. Fujii, S. Kanamitsu, T. Mizuma
MPI Parallelization of Magnetic Field Analysis for Rotating Machines on PC Cluster ........................................................................ 775
T. Nakano, Y. Kawase, T. Yamaguchi, K. Tanaka
Characteristics Analysis of IPM Motor Driven by Voltage Source Inverter with Parallel Computing ............................................... 779
Y. Kawase, T. Yamaguchi, M. Mizuno, T. Nakano, K. Tanaka
Effects of Eddy Current on Dynamic Characteristics of Electromagnets Using 3-D Finite Element Method .................................... 784
Y. Kawase, T. Yamaguchi, J. Inuzuka, Y. Shibayama
Simulation of On-Line Monitoring of Transformer Winding Axial Displacement ................................................................................ 788
G. Mokhtari, G. B. Gharehpetian, M. A. Hejazi, J. Ebrahimi
Thermographic Diagnostic of Electrical Machines .................................................................................................................................... 792
M. Baranski, A. Polak
Diagnostic Tests of Turn-To-Turn Insulation ............................................................................................................................................. 795
A. Decner, A. Polak
Bi-Objective Sizing Optimization of a PM Machine Drive on an Operating Profile.............................................................................. 798
J. Aubry, H. Ben Ahmed, B. Multon
Doubly-fed Asynchronous Machine for Low Voltage Drives .................................................................................................................... 805
M. Stiebler
Peculiar Design of Permanent Magnet Synchronous Motor ..................................................................................................................... 811
J. B. Danilevich, V. N. Antipov, I. Yu. Kruchinina, Y. Ph. Khozikov, A. A. Ponomareva, L. Yu. Shtainle
Electrical Ageing in Lifetime Estimation of Hydroelectric Generator Stator Windings ....................................................................... 815
Voitto I. J. Kokko
Permanent Magnet Technology in Wind Power Generators..................................................................................................................... 820
J. Pyrhönen, J. Nerg, P. Kurronen, J. Puranen, M. Haavisto
Effect of BLDC Motor Commutation Schemes on Inverter Capacitor Size Selection ........................................................................... 826
Syed A. Hossain, Rodrigo Pedro
Energy Management Strategies for an Embedded Fuel Cell System on Agricultural Vehicles............................................................ 831
P. J. Tritschler, S. Bacha, E. Rullière, G. Husson
Modeling Demagnetization Effects in Permanent Magnet Synchronous Machines ............................................................................... 837
Christian Kral, Ruud Sprangers, Jeroen Waarma, Anton Haumer, Oliver Winter, Elena Lomonova
Grid Interface for a Wind Turbine-Fuel Cell System ................................................................................................................................ 843
E. Ribeiro, A. J. M. Cardoso, C. Boccaletti
A Design Approach for an Axial-flux Permanent Magnet Motor ............................................................................................................ 849
Florian Dumas, Daniel Matt, Julien Jac, Philippe Enrici
Fault Frequency Tracking During Transient Operation of Wind Turbine Generators ........................................................................ 855
C. J. Crabtree, S. Djurovic, P. J. Tavner, A. C. Smith
Attenuation of Power Fluctuations in Wind Diesel Hybrid System – Using Ultracapacitors and Batteries........................................ 860
M. A. Tankari, M. B.Camara, B. Dakyo, C. Nichita
Discussion of a New Rocking Buoy Reaction Based Wave Energy Converter Topology....................................................................... 866
R. E. Gemmell, A. Muetze
Discussion of Three Different Algebraic Manipulations and Their Influences on Deterministic Optimization ................................. 872
M. Cheung, A. Muetze
Iterative FEM-BEM Technique for an Efficient Computation of Magnetic Fields in Regions with Ferromagnetic
Bodies ............................................................................................................................................................................................................... 878
I. R. Ciric, M. Maricaru, I. F. Hantila, S. Marinescu
Emulation of Fuel Cell Systems .................................................................................................................................................................... 884
P. J. Tritschler, E. Rullière, S. Bacha
Theoretical Considerations in Numerical Analysis in View of Modeling a Pulsatile Magnetoactive Pump for
Medical Circulatory Support ........................................................................................................................................................................ 889
N. Martinez, Y. Lefevre
Fault-Tolerant PM Brushless DC Drive for Aerospace Application ........................................................................................................ 895
M. Villani, M. Tursini, G. Fabri, L. Castellini
Shaping the HIPWM-FMTC Strategy to Reduce Acoustic Noise Radiated by Inverter-Fed Induction Motors ................................ 902
Antonio Ruiz-González, Mario J. Meco-Gutiérrez, Francisco Vargas-Merino, Francisco Pérez-Hidalgo, Juan Ramón Heredia
Larrubia
Carrier Based PWM Technique for a Novel Three-to-Seven Phase Matrix Converter......................................................................... 908
Sk. Moin Ahmed, Atif Iqbal, Haitham Abu-Rub, M. Rizwan Khan
An Analytical Approach to the Thermal Design of a Double-sided Linear Switched Reluctance Motor ............................................ 914
J. G. Amoros, P. Andrada, B. Blanque
High Speed Surface Permanent Magnet Synchronous Machines for a Screwdriver Application ........................................................ 918
N. Bernard, F. Martin, M. E. Zaïm
Parameterless Rotor Position Estimation in a Direct-Torque Controlled Salient-Pole PMSM without Using
Additional Test Signals .................................................................................................................................................................................. 924
Frederik De Belie, Thomas Vyncke, Jan Melkebeek
Design Criteria and Operation Analysis of a High Speed Brushless PM Micro-Motor......................................................................... 930
A. Di Gerlando, G. Foglia, M. Iacchetti, R. Perini
Analytical Model and Implementation by Equations of Three-Phase Diode Bridge Rectifiers Operation ......................................... 938
A. Di Gerlando, G. Foglia, M. Iacchetti, R. Perini
Analysis and Comparison of Different Diode Rectifiers Solutions in Grid Connected WECS Employing Modular
PMSGs ............................................................................................................................................................................................................. 944
A. Di Gerlando, G. Foglia, M. F. Iacchetti, R. Perini
Field and Circuit Calculation of the Core Losses in the Energy-saving Small-size Induction Motor .................................................. 950
Krzysztof Komeza, Maria Dems
Scalable, Low-Cost, High Performance IPM Motor for Hybrid Vehicles ............................................................................................... 956
Ayman M. EL-Refaie, James P. Alexander, Steven Galioto, Manoj R. Shah, Kum-Kang Huh, William D. Gerstler, Jagadeesh
Tangudu, Thomas M. Jahns
A Position Detecting Method Using Hall Element for Discontinuous Stator Permanent Magnet Linear
Synchronous Motor ........................................................................................................................................................................................ 962
Takuya Sugimoto, Kenji Suzuki, Hideo Dohmeki
The Transient Thermal Characteristics of Periodic Pulse-type Linear Induction Motor ..................................................................... 968
Yuxing ZHANG, Weiming MA, Junyong LU, Zhaolong SUN, Jin XU
Permanent Magnets Synchronous Machine with Rotor Poles Supported by Magnets .......................................................................... 973
Jere Kolehmainen
An H2 Linearizing and Decoupling Control of a Permanent Magnet Synchronous Machine ............................................................... 979
S. Machmoum, L. Loron, N. Bernard
Weight and Efficiency Optimization of Auxiliary Drives Used in Automobile ....................................................................................... 985
G. Ombach, J. Junak
Fault Tolerant Permanent Magnet Machines used in Automobile Applications .................................................................................... 991
D. Fodorean, M. Ruba, D. C. Popa, A. Miraoui
Analysis of the AC-Contactor Electrical Behavior under Voltage Dips................................................................................................... 997
A. Honrubia Escribano, E. Gomez-Lazaro, G. Jimenez-Moreno, A. Molina-Garcia
Low Speed Synchronous Generator with PM Excitation ........................................................................................................................ 1002
G. Madescu, M. Biriescu, O. Prostean, T. Mihut, M. Greconici, M. Mot, L. Augustinov
Dynamic and Steady-State Performance of Line-Starting Permanent Magnet Motors....................................................................... 1007
Akeshi Takahashi, Satoshi Kikuchi, Kenji Miyata, Shin’ichi Wakui, Hiroyuki Mikami, Kazumasa Ide, Andreas Binder
Performance Analysis of a PMSM Drive for Hybrid Electric Vehicles ................................................................................................. 1013
Jorge O. Estima, A. J. Marques Cardoso
Strategy to Detect and Prevent the Current Zero-Crossing for Inverter Powered Drives .................................................................. 1019
Fabien Gabriel, Frederik De Belie, Pascal Druyts, Xavier Neyt
Analytical Calculation of Rotor Magnet Eddy-Current Losses for High Speed IPMSM .................................................................... 1025
Adel Bettayeb, Xavier Jannot, Jean-Claude Vannier
Power Converter Fault Diagnosis in SRM Drives Based on DC Bus Current Analysis....................................................................... 1031
Natalia S. Gameiro, A. J. Marques Cardoso
Comparison of Field and Circuit Generator Models in Single Machine Infinite Bus System Simulations ....................................... 1037
Johan Lidenholm, Martin Ranlof, Urban Lundin
Transformer Modeling Approaches for Frequency Response Analysis................................................................................................. 1043
Carlos González, Jorge Pleite
Vehicles to Grid (V2G) Concept Applied to a Virtual Power Plant Structure...................................................................................... 1049
M. Musio, P. Lombardi, A. Damiano
Dynamic Analysis of Linear Electromagnetic Solenoid for Electric Vehicle Relay .............................................................................. 1055
Hyun-Woo Joo, Young-Hwan Eum, Hong-Tae Park, Seokweon Park
Field Expansion of Low Speed in Sensorless 120-degree Conduction Drives of Brushless DC Motor ............................................... 1059
Takahiro Ichikawa, Hideo Dohmeki
Position Sensorless Control for Interior Permanent Magnet Synchronous Motor Using Adaptive Flux Observer ......................... 1065
Kenji Hanamura, Hideo Dohmeki
Influence of Synchronous Generator’s Stator Core on Partial Discharge On-line Measurement ...................................................... 1071
Zoran Bertalanic, Milutin Pavlica, Zlatko Maljkovic
Modeling of Interior Permanent Magnet Machine using Combined Field-Circuit Analysis .............................................................. 1076
Panagiotis E. Kakosimos, Antonios G. Kladas
Improvement of a Claw Pole Motor Using Additional Ferrite Magnets for Hybrid Electric Vehicles .............................................. 1082
Y. Kuroda, M. Morita, M. Hazeyama, M. Azuma, M. Inoue
Advanced Iteration for a Magnetic Equivalent Circuit and Modeling a 3-Phase Transformer ......................................................... 1085
M. G. Ortner, R. R. Seebacher, K. Krischan
Steady State Modeling of Doubly Fed Induction Generators for Mega Watt Class Wind Turbines.................................................. 1091
Georg Ofner, Oliver Koenig, Guenther Dannerer, Roland Seebacher
Impact of Slot Geometry and Rotor Position on AC Armature Losses of Interior PM Synchronous Machines .............................. 1097
S. Hahlbeck, D. Gerling
Permanent Magnets Models and Losses in 2D FEM Simulation of Electrical Machines .................................................................... 1100
Anouar Belahcen, Antero Arkkio
Power Flow Analysis for Plug in Hybrid Electric Vehicles ..................................................................................................................... 1106
C. Polini, F. Crescimbini, A. Di Napoli, A. Lidozzi, L. Solero
Hybrid Excitation Synchronous Generators for Island Operation ........................................................................................................ 1112
Katteden Kamiev, Janne Nerg, Juha Pyrhönen, Valeriy Zaboin
An Integrated Design of SM2c Core Motor for Vehicular Applications ................................................................................................ 1118
Avo Reinap, Conny Högmark, Mats Alaküla, Tord Cedell, Mats Andersson
Magnetic Bearings and Some New Applications....................................................................................................................................... 1124
Peter Klaus Budig
Influence of Supply Harmonic Voltages on DFIG Stator Current and Power Spectrum.................................................................... 1131
S. Djurovic, S. Williamson
Comparison Between Models for Eddy-Current Loss Calculations in Rotor Surface-Mounted Permanent Magnets .................... 1137
J. Alexandrova, H. Jussila, J. Nerg, J. Pyrhönen
Upgrade of a Kÿln Drÿve System For Cement Industry.......................................................................................................................... 1143
George A. Christopoulos, Athanasios N. Safacas
Study of Synchronous Generator Eccentricities using Analytical Approach and FEM ...................................................................... 1148
B. A. T. Iamamura, Y. Le Menach, A. Tounzi, N. Sadowski, E. Guillot
Identifying the Heat Transfer Coefficients on the End-windings of an Electrical Machine by Measurements and
Simulations .................................................................................................................................................................................................... 1154
Martin Hettegger, Bernhard Streibl, Oszkár Bíró, Harald Neudorfer
The Microturbogenerator Prototype: Design and Testing ...................................................................................................................... 1159
I. Yu. Kruchinina, V. N. Antipov, V. V. Moskovskaja, Y. Ph. Khozikov, A. V. Ivanova
Optimal Number of Strands in Electrical Medium-Frequerncy Machines ........................................................................................... 1163
H. Kasten, W. Hofmann
Comparison of Iron Losses Evaluations by Different Testing Procedures ............................................................................................ 1169
Aleandro A. de Espíndola, Fabrício Tristão, Jean Paul Schlegel, Nelson Jhoe Batistela, Nelson Sadowski, Patrick Kuo-Peng,
Mauricio Rigoni
Flexible Power Converters for the Fault Tolerant Operation of Micro-Grids...................................................................................... 1173
F. Genduso, R. Miceli, G. Ricco Galluzzo
Main Fuel Cells Mathematical Models: Comparison and Analysis in Terms of Free Parameters..................................................... 1179
D. Bonanno, F. Genduso, R. Miceli, C. Rando
Search for Optimization of Synchronous Generator Excitation Machine by Analyzing the Rectifier Commutation
Angle .............................................................................................................................................................................................................. 1185
Abdallah Barakat, Slim Tnani, Gerard Champenois, Emile Mouni
Analytical Description of a Single-stator Axialflux Induction Machine with Squirrel Cage............................................................... 1191
Jakob Igelspacher, H.-G. Herzog
Analysis of Magnetic Field Distribution and Parameter Calculation of Linear Induction Motor with Novel
Winding Construction.................................................................................................................................................................................. 1197
Jin Xu, Weiming Ma, Junyong Lu, Zhaolong Sun, Yuxing Zhang
Cogging Torque Sensitivity in Design Optimisation of Low Cost Non-overlap Winding PM Wind Generator ............................... 1203
Johannes H. J. Potgieter, Maarten J. Kamper
TRANSFO_EMF.ELF – A 3D Magnetic Leakage Flux Simulator for Dry Cast Transformers......................................................... 1209
C. Lemos Antunes, A. Jácomo Ramos
On line Partial Discharges Test on Rotating Machines Supplied by IFDs............................................................................................. 1215
Daniel F. Ortega, Francesco Castelli-Dezza
Shear Stress Concentrations in Permanent Magnet Rotor Sleeves ........................................................................................................ 1219
D. J. B. Smith, B. C. Mecrow, G. J. Atkinson, A. G. Jack, A. A. A. Mehna
Finite Element Analysis of an External Rotor Permanent Magnet Synchronous Machine with Star- and DeltaConnected Tooth Coil Windings................................................................................................................................................................. 1225
Erich Schmidt, Marko Susic, Andreas Eilenberger
FEM-Data based Model for fast Simulation of a Transverse Flux Machine ......................................................................................... 1231
M. Siatkowski, J. Schüttler, B. Orlik
Finite Element Analysis of a Transverse Flux Machine with an External Rotor for Wheel Hub Drives........................................... 1237
Erich Schmidt, Daniel Brunnschweiler, Stefan Berchten
Investigation of End-Winding Proximity Losses in Electromagnetic Devices....................................................................................... 1243
R. Wrobel, A. Mlot, P. H. Mellor
Analysis of the Effect of Asymmetrical Phase Parameters in a 3-phase Permanent Magnet Synchronous Motor........................... 1249
X. D. Zhao, J. Corda, T. X. Mei
On Line Tuning of the Stator Inductance in a MRAS Observer for Sensorless DFIM Drives ........................................................... 1255
M. F. Iacchetti
Sensorless Low Range Speed Estimation and Parameter Identification of Induction Motor Drives Devoted to Lifts
Automatic Rescue Devices ........................................................................................................................................................................... 1261
A. O. Di Tommaso, R. M. Ferrigno
A Flux and Speed Observer for Sensorless SPIM Applications.............................................................................................................. 1267
M. Caruso, V. Cecconi, A. O. Di Tommaso, R. Rocha
Braking Torque Analysis of the Single Phase Linestart Permanent Magnet Synchronous Motor..................................................... 1273
F. J. H. Kalluf, C. Pompermaier, M. V. Ferreira da Luz, N. Sadowski
Development of a Low-Speed Multi-Pole Synchronous Machine with a Field Winding on the Stator Side...................................... 1278
Tadashi Fukami, Yoshitaka Matsuura, Kazuo Shima, Masatoshi Momiyama, Mitsuhiro Kawamura
3-D Finite Element Analysis of Dynamic Characteristics of Spherical Resonant Actuator................................................................. 1284
Satoshi Suzuki, Yoshihiro Kawase, Tadashi Yamaguchi, Yoshiyasu Shibayama, Katsuhiro Hirata, Tomohiro Ota
Development of Ironless Type Surface Motor........................................................................................................................................... 1288
Hideyuki Kajiyama, Kenji Suzuki, Hideo Dohmeki
Demagnetization Analysis of Additional Permanent Magnets in Salient-Pole Synchronous Machines under Sudden
Short Circuits................................................................................................................................................................................................ 1294
Tatsuya Hosoi, Hiroya Watanabe, Kazuo Shima, Tadashi Fukami, Ryoichi Hanaoka, Shinzo Takata
Stator Current Harmonics in Saturated Cage and Wound Rotor Induction Motors .......................................................................... 1300
Gojko Joksimovic
Wireless Instantaneous Torque Measurement, Application to Induction Motors................................................................................ 1306
Lotfi Baghli, Jean François Pautex, Smail Mezani
Reduction of Force Ripples in PM Planar Actuator................................................................................................................................. 1312
G. Krebs, A. Tounzi, F. Piriou, B. Pauwels, D. Willemot
A New Harmony Search Method in Optimal Wind Generator Design.................................................................................................. 1318
Xiao-Zhi Gao, Tapani Jokinen, Xiaolei Wang, Seppo Jari Ovaska, Antero Arkkio
Switched Reluctance Machines for Hybrid Electric Vehicles ................................................................................................................. 1324
S. Smaka, Š. Mašic, M. Cosovic, I. Salihbegovic
Fault-Tolerant Control of Multi-phase Permanent Magnetic Bearingless Motors............................................................................... 1330
X. L. Wang, Q.-C. Zhong, Z. Q. Deng, S. Z. Yue
Direct Active and Reactive Power Control of Variable-Speed Doubly-Fed Induction Generator on Micro-Hydro
Energy Conversion System.......................................................................................................................................................................... 1336
Stefan BREBAN, Mircea M. RADULESCU, Benoît ROBYNS
Influence of Diode Commutation Processes on Rectifier Transformers Operation ............................................................................. 1342
Andrzej Sikora, Barbara Kulesz
Torque Ripple Minimization in Direct Torque Control of Six-Phase Induction Machines Using Fuzzy Inference
Systems........................................................................................................................................................................................................... 1347
M. Moghadasian, R. Kianinezhad, F. Betin, G. A. Capolino
Comparison of an Axial Flux and a Radial Flux Permanent Magnet Motor for Solar Race Cars ..................................................... 1353
R. Al Zaher, S. de Groot, H. Polinder, P. Wieringa
Computing and Measuring Dynamic Characteristics of the Induction Motor ..................................................................................... 1359
A. Bosovic, Š. Mašic, S. Smaka
Ageing Study of a Supercapacitor-battery Storage System..................................................................................................................... 1364
B. Vulturescu, S. Butterbach, Ch. Forgez, G. Coquery, G. Friedrich
Analytical Calculation of Inductances of Windings in Electrical Machines with Slot Skew ............................................................... 1370
Bin Ouyang, Dezhi Liu, Xiaofei Zhai, Weiming Ma
Evaluation of Oscillatory Actuator for Optical Scanner.......................................................................................................................... 1376
Tsutomu Mizuno, Yoshinori Teramae, Yuki Hattori, Tatsuya Horio
Two Theorems About Electromagnetic Force in Activate Anisotropic Regions ................................................................................... 1382
D. Spalek
A New Hybrid Excitation Doubly Salient Brushless DC Generator with Dual Terminal Output ...................................................... 1388
Zhuoran Zhang, Yangyang Tao, Yangguang Yan
Comparative Study of PMSM with Integer-slot and Fractional-slot Windings.................................................................................... 1393
J. A. Güemes, A. M. Iraolagoitia, P. Fernández, M. P. Donsión
Analysis of Radial Forces Based on Rotor Eccentricity of Bearingless Switched Reluctance Motors ............................................... 1399
L. Chen, W. Hofmann
Tolerance Allocation in Electric Machine Based on Stochastic Response Surface Methodology ....................................................... 1405
Young-Kyoun Kim, Sung-Il Kim, Se-Hyun Rhyu, In-Soung Jung
The Research on the Parameters of Multi-phase Synchronous Machines with AC and DC Output ................................................. 1409
Xusheng WU, Wei GAO, Junhong ZHANG
Analysis of Transient Phenomena of a Salient Pole Synchronous Machine During Inter-turn Stator Short-Circuits
Using FEM..................................................................................................................................................................................................... 1415
S. E. Dallas, J. C. Kappatou, A. N. Safacas
A New RPWM Technique with Harmonics Injection and Frequency Randomized Modulation ....................................................... 1421
J. Ruiz-Pérez, A. Ruiz-González, F. Pérez-Hidalgo
A New Linear Voice-coil Motor for Ironless Loudspeakers: Analytical Study..................................................................................... 1426
Valerie Lemarquand, Romain Ravaud, Guy Lemarquand
A 7-Level Single DC Source Cascaded H-Bridge Multilevel Inverters Control Using Hybrid Modulation ...................................... 1431
F. Khoucha, A. Ales, A. Khoudiri, K. Marouani, M. E. H. Benbouzid, A. Kheloui
Slotless Tubular Linear Synchronous Motor Model ................................................................................................................................ 1436
A. D. P. Juliani, D. P. Gonzaga, M. L. Aguiar, J. R. B. A. Monteiro
3D-FEM Calculation of Electromagnetic Properties of Single Phase Induction Machines ................................................................. 1441
J. Bacher, F. Waldhart, Ch. Grabner
3D Analysis of Circumferential and Axial Segmentation Effect on Magnet Eddy Current Losses in Permanent
Magnet Synchronous Machines with Concentrated Windings ............................................................................................................... 1447
M. Mirzaei, A. Binder, C. Deak
Efficiency Determination of Standard Asynchronous Machines from Start-Up Data ......................................................................... 1453
J. Bacher, F. Waldhart
Design, Optimization and Construction of an Electric Motor for an Electric Rear Wheel Drive Unit Application
for a Hybrid Passenger Car......................................................................................................................................................................... 1459
F. Márquez-Fernández, A. Reinap, M. Alaküla
Optimal Value of Air Gap Induction in an Induction Motor .................................................................................................................. 1465
M. N. Benallal, M. A. Vaganov, D. S. Pantouhov, E. Ailam, K. Hamouda
Tubular Linear Induction Motor Analysis by Using Finite Elements and Current Filament Models ............................................... 1469
Y. BENCHEIKH, Y. OUAZIR, R. IBTIOUEN
Exploring a Vibration Synthesis Process for the Acoustic Characterization of Electric Drives ......................................................... 1475
Matthias Boesing, Rik W. De Doncker
A New Optimization Approach for the Design of IPM Synchronous Motor with Wide Constant-Power Region............................ 1481
Francesco Parasiliti, Marco Villani, Stefano Lucidi, Francesco Rinaldi
Structure and Theoretical Analysis of a Novel Rotary-Linear Isotropic Brushless Machine ............................................................. 1488
P. Bolognesi
Detection of Broken Rotor Bar in Squirrel-Cage Induction Machines Using Stator Zero-Components........................................... 1494
Goran Petrovic, Martin Jadric, Marin Despalatovic
A Three Level NPC Inverter with Neutral Point Voltage Balancing for Induction Motors Direct Torque Control........................ 1500
Hamza Alloui, Abderrahmane Berkani, Hacene Rezine
Investigations of No-Load and Load Losses in Amorphous Core Dry-Type Transformers................................................................ 1506
Thorsten Steinmetz, Bogdan Cranganu-Cretu, Jasmin Smajic
Performance Analysis of a Linear Synchronous Motor with HTS Bulk Magnets ................................................................................ 1512
Youguang Guo, Jianxun Jin, Jianguo Zhu, Haiyan Lu, Wei Xu
An Optimal Motor Drive Current Model and Its Application to Reluctance Motor ........................................................................... 1517
C. BI, N. P. Hla, C.S. Soh, Q. Jiang
Optimizing the Performance of a Switched Reluctance Generator by Simulation............................................................................... 1523
Hoang Le-Huy, Mohamed Chakir
Voltage Dip Immunity of PWM Drives with Ride-Through Capabilities.............................................................................................. 1529
Pierre Angers, François Lévesque
Parasitic Forces in Large Synchronous Machines Considering Tooth Ripple Effects ......................................................................... 1534
Georg Traxler-Samek, Thomas Lugand, Mauro Uemori
Concentrated Winding Axial Flux Permanent Magnet Motor for Industrial Use................................................................................ 1540
Hanne Jussila, Janne Nerg, Juha Pyrhönen, Asko Parviainen
Time-rotating Switching Surface for Robust Position Control of a Six Phase Induction Machine .................................................... 1545
F. Betin, A. Yazidi, G. A. Capolino
Design Aspects on the Vibration Magnetostrictive Actuators................................................................................................................. 1551
Mircea Ignat, Ioan Puflea, Alexandru-Laurentiu Catanescu, Adrian Vintila
Incipient Bearing Fault Diagnostics for Inverter Fed Induction Motor Drive using ANFIS .............................................................. 1556
Haitham Abu-Rub, Sk. Moin Ahmed, Atif Iqbal, M. Rahimian, H. A. Toliyat
Design and Analysis of Enclosed Rotor Halbach Array Brushless DC Motor for Spacecraft Applications...................................... 1561
R. P. Praveen, M. H. Ravichandran, V. T. Sadasivan Achari, V. P. Jagathy Raj, G. Madhu, G. R. Bindu
Analytical Calculation Model for Stator Winding Faults in Synchronous Machines .......................................................................... 1567
Jens Rosendahl, Hendrik Steins
Three Phase Tooth-concentrated Interspersed Windings with Low Space Harmonic Content.......................................................... 1572
Mihail V. Cistelecan, Fernando J. T. E. Ferreira, Mihail Popescu
Liquid Internal Cooling of Electric Machine Windings in Arctic Conditions....................................................................................... 1578
P. Röyttä, M. Polikarpova, J. Nerg, J. Pyrhönen
Identification of Synchronous Machine by Standstill Frequency Response (SSFR) Method - Influence of the Stator
Resistance -.................................................................................................................................................................................................... 1583
H. Radjeai, A. Barakat, S. Tnani, G. Champenois
The SCR Transient Model and Its Applications into Three-phase Rectifier System ........................................................................... 1588
Na He, An Hu, Qiang Gao, Gaofei Xue
Torque-to-Weight Ratio Maximization in PMSM Using Topology Optimization.............................................................................. 1594
Thibaut Labbre, Bruno Dehez, M. Markovic, Y. Perriard
Control Strategy with Minimal Controller Reconfiguration of Fault Tolerant Polyphase PMSM Drives Under
Open Circuit Fault of One Phase................................................................................................................................................................ 1599
F. Baudart, B. Dehez, F. Labrique, E. Matagne, D. Telteu, P. Alexandre
Review of Failures and Condition Monitoring in Wind Turbine Generators ....................................................................................... 1605
Z. Daneshi-Far, G. A. Capolino, H. Henao
Analytical and FEM Magnetic Optimization of a Limited Motion Actuator for Automotive Application ....................................... 1611
C. Gutfrind, X. Jannot, J. C. Vannier, P. Vidal, D. Sadarnac
Integrated Chargers for EV’s and PHEV’s: Examples and New Solutions .......................................................................................... 1617
Saeid Haghbin, Kashif Khan, Sonja Lundmark, Mats Alaküla, Ola Carlson, Mats Leksell, Oskar Wallmark
FPGA-Based Voltage Measurements in AC Drives.................................................................................................................................. 1623
Luca Peretti, Mauro Zigliotto
Analysis of Synchronous Generator End-Winding Deformations Using 3-D Time-Harmonic FEM................................................. 1629
Andrej Stermecki, Oszkár Bíró, Hermann Lang, Georg Ofner, Kurt Preis, Siegfried Rainer
Influence of Space Harmonics on Properties of Six-Phase Induction Machine - Part I. Analysis ...................................................... 1634
L. Schreier, J. Bendl, M. Chomat
Optimized Power-feedback with an 8.7 kNm-Transverse Flux Generator ........................................................................................... 1640
Holger Groke, Jochen Schüttler, Johannes Adler, Bernd Orlik
Influence of Space Harmonics on Properties of Six-Phase Induction Machine - Part II. Simulation and
Experiments .................................................................................................................................................................................................. 1646
L. Schreier, J. Bendl, M. Chomat, M. Skalka
Transient Finite-Element Analysis and Testing of a Salient-Pole Synchronous Generator with Different Damper
Winding Design Solutions............................................................................................................................................................................ 1652
C. Bassi, D. Giulivo, A. Tessarolo
HIL Simulation of a Mixed Islanded Power Network with External DSP Regulator .......................................................................... 1659
N. Junod, P. Allenbach, S. Robert, B. Kawkabani, A. Hodder, G. Banyai
Feedback Control of Electromagnetic Spherical Acuator with Three-Degree-of-Freedom ................................................................ 1665
Shuhei Maeda, Katsuhiro Hirata, Shohei Ikejiri, Mingyu Tong
Simulation and Test Results of Grid Connected WECSs with Diode Rectifiers and Modular PMSGs ............................................. 1671
A. Di Gerlando, G. Foglia, M. F. Iacchetti, R. Perini
Generator Requirements and Functionality for Ocean Energy Converters.......................................................................................... 1677
Dara L. O’Sullivan, Anthony W. Lewis
Design Criteria of Axial Flux PM Machines for Direct Drive Wind Energy Generation .................................................................... 1684
A. Di Gerlando, G. Foglia, M. F. Iacchetti, R. Perini
Reduction of Motor Overvoltage fed by PWM AC Drives using a Universal Model ........................................................................... 1690
F. Castelli-Dezza, M. M. Maglio, G. Marchegiani, D. F. Ortega, D. Rosati
The Synchronous Generator with Permanent Magnets and Excitation Winding ................................................................................ 1696
J. P. Bernatt, S. A. Gawron
L∞-norm and Clipped l2-norm Based Commutation for Ironless Over-actuated Electromagnetic Actuators .................................. 1700
M. Gajdušek, A. A. H. Damen, P. P. J. van den Bosch
Segmented Switched Reluctance Motor with Novel Winding and Excitation Strategy ....................................................................... 1706
R. Vandana, B. G. Fernandes
Effect of Local Residual Stress in Rotating Machine Core on Vector Magnetic Property .................................................................. 1710
Yuichiro Kai, Yuji Tsuchida, Takashi Todaka, Masato Enokizono
Advanced Doubly Fed Induction Machine Diagnosis Under Time–varying Condition ....................................................................... 1716
Y. Gritli, A. Stefani, C. Rossi, F. Filippetti, A. Chatti
A Novel Axial Flux Segmented SRM for Electric Vehicle Application .................................................................................................. 1723
R. Madhavan, B. G. Fernandes
Design and Development of a Three-Phase Permanent Magnet Claw Pole Synchronous ................................................................... 1729
Florin Nicolae Jurca, Claudia Martis, Karoly Biro, Claudiu Opera
Simulating Real DSP Code Using a DLL, Application to a 3-level VSI SVC ........................................................................................ 1735
A. Hodder, R. Wetter, G. Banyai, J.-J. Simond
Design Methodology of IPMSM Using Synthetic Flux Linkage.............................................................................................................. 1741
Youngjun Ahn, Seungho Lee, Sang-Yong Jung
Robust Speed and Force Control of Electrical Drives using Self-Adjusting Sliding Mode ................................................................. 1746
U. Kreutzer, D. Gerling
Axial Flux Machines Modelling with the Combination of 2D FEM and Analytic Tools...................................................................... 1752
A. Egea, G. Almandoz, J. Poza, A. Gonzalez
Validation of a Comprehensive Analytic Approach to Determine the Noise Behaviour of Induction Machines.............................. 1758
Bernhard Weilharter, Oszkar Biro, Hermann Lang, Georg Ofner, Siegfried Rainer
Analytical Computation of Stator Iron Losses in Interior Permanent-Magnet Synchronous Machine ............................................ 1764
X. Jannot, J.-C. Vannier, A. Kedous-Lebouc, C. Marchand, M. Gabsi, J. Saint-Michel
Comparison of PMSG and DFIG for Marine Current Turbine Applications ...................................................................................... 1770
S. Benelghali, M. E. H. Benbouzid, J. F. Charpentier
Performance Evaluation of Differential Flatness Based-Control of Fuel Cell/Supercapacitor Hybrid Power Source .................... 1776
Phatiphat Thounthong, Serge Pierfederici, Bernard Davat
A Single-Phase Reluctance Generator with Permanent Magnets between Stator Teeth ..................................................................... 1782
K. Kurihara, T. Kubota, T. Kosaka, T. Nakamura
Study of a Real Time Emulator for Marine Current Energy Conversion............................................................................................. 1788
G. Caraiman, C. Nichita, V. Minzu, B. Dakyo, C. H. Jo
Modelling and Design of a Contactless Energy Transfer System for a Notebook Battery Charger ................................................... 1794
Pascal Meyer, Paolo Germano, Yves Perriard
Multi-fault Diagnosis of Rolling-element Bearings in Electric Machines .............................................................................................. 1800
Guido Del Vescovo, Maurizio Paschero, Antonello Rizzi, Roberto Di Salvo, Fabio Massimo Frattale Mascioli
Assessment of a Multilevel Converter for a PHEV Charge and Traction Application ........................................................................ 1806
Oskar Josefsson, Anders Lindskog, Sonja Lundmark, Torbjörn Thiringer
Prototype of Electric Driveline with Magnetically Levitated Double Wound Motor ........................................................................... 1812
Johan Abrahamsson, Juan de Santiago, Janaina G. Oliveira, Johan Lundin, Hans Bernhoff
Classification of Symmetrical Non-Overlapping Three-Phase Windings .............................................................................................. 1817
Johannes J. Germishuizen, Maarten J. Kamper
Development and Optimization of a Tubular Linear Synchronous Motor Considering Various Skewing Methods
and Eddy Current Losses ............................................................................................................................................................................ 1823
A. D. P. Juliani, M. Leβmann, D. P. Gonzaga, K. Hameyer
Extending the Speed Range of Surface Permanent-Magnet Axial-Flux Motors by Flux-Weakening Characteristic
Modification .................................................................................................................................................................................................. 1829
Fabio Luise, Antonio Odorico, Alberto Tessarolo
Experimental and Numerical Evaluation of Iron Losses in a Claw Pole Car Generator..................................................................... 1836
A. Gimeno, G. Friedrich, K. El-kadri-benkara
Fault Tolerant Winding Technology Comparison for Flux Switching Machine................................................................................... 1842
Tsarafidy Raminosoa, Chris Gerada
Inter-laminar Flux and Eddy Current Losses in a Circumferentially Cooled Stator Core................................................................. 1848
M. Festa, H.-D. Eberhardt, W. Hofmann
Modeling and Analysis of a Multistage Linear Induction Motor Fed by a Permanent Magnet Flywheel MotorGenerator ...................................................................................................................................................................................................... 1854
G. Becherini, S. Di Fraia, B. Tellini
Design and Construction of a Synchronous Generator Test Setup ........................................................................................................ 1860
Mattias Wallin, Martin Ranlöf, Urban Lundin
Vector Controlled Permanent Magnet Synchronous Motor (PMSM) Drive with Stator Turn Fault ................................................ 1865
M. Hadef, M. R. Mekideche, A. Djerdir
Analysis of Hydro-Generator’s Losses Determined by Calorimetric Method ...................................................................................... 1871
Zoran Bertalanic, Milutin Pavlica, Zlatko Maljkovic
Influence of Mounting Temperature Probes on the Excitation Winding on its Temperature Field................................................... 1877
Zlatko Hanic, Marinko Kovacic, Mario Vražic
Super Premium Efficient Line Start-up Permanent Magnet Synchronous Motor............................................................................... 1883
X. Feng, L. Liu, J. Kang, Y. Zhang
Automatic and Robust Diagnosis of Broken Rotor Bars Fault in Induction Motor ............................................................................. 1889
M. BOUZID, G. CHAMPENOIS, N. BELLAAJ, K. JELASSI
Induction Generator with Vienna Rectifier: Feasibility Study for Wind Power Generation............................................................. 1896
Hao Chen, Dionysios C. Aliprantis
The Analysis of the Infrared Excitation Winding Surface Temperature Measurement on a Synchronous Hydrogenerator in Rotation ................................................................................................................................................................................... 1902
Stjepan Stipetic, Marinko Kovacic, Zlatko Hanic
Comparison of Expected and Measured Values of Luminance Sensors in Dual-axis Photovoltaic Positioning
System ............................................................................................................................................................................................................ 1908
I. Petrovic, I. Gašparac, M. Vražic
Impact of Radial Force Nonlinearities on Decentralized Control of Magnetic Bearings..................................................................... 1912
Boštjan Polajžer, Jože Ritonja, Drago Dolinar
Advanced Calculation of Eddy Current Losses in PMSM with Tooth Windings................................................................................. 1916
C. Bode, W.-R. Canders
New Scheme for High-Efficiency Operation of PWM Inverter-Driven Hysteresis Motor with Short-Duration
Overexcitation............................................................................................................................................................................................... 1922
Tomotsugu Kubota, Takahiro Tamura, Kazumi Kurihara
Design Methodology for Complex FPGA-based Controllers – Application to an EKF Sensorless AC Drive ................................... 1928
L. Idkhajine, E. Monmasson
Control and Analysis of a Hybrid Renewable Energy-based Power System......................................................................................... 1934
C. Patsios, M. Antonakopoulos, A. Chaniotis, A. Kladas
Extended EMF Observer for Wide Speed Range Sensorless Control of Salient-pole Synchronous Motor Drives .......................... 1940
Takumi Ohnuma, Shinji Doki, Shigeru Okuma
Reactive Power Control for Variable Speed Wind Turbines to Low Voltage Ride Through Grid Code Compliance..................... 1946
A. Teninge, D. Roye, S. Bacha
Numerical Integration of ODEs in Real Time Systems like State Observers: Stability Aspects......................................................... 1952
N. Bressan, S. Carmeli, F. Castelli–Dezza, M. F. Iacchetti, R. Perini
Exploitation of a New Iron B-H Phenomenon for the Standstill Position Detection of PM Motors ................................................... 1959
O. Scaglione, M. Markovic, Y. Perriard
Optimal Design of a Rotating Transverse Flux Motor (TFM) with Permanent Magnets in Rotor .................................................... 1963
Larisa Strete, L.Tutelea, I. Boldea, Claudia Martis, I.-A. Viorel
Performance Analysis of Transformless Single Switch Quadratic Boost Converter for Grid Connected
Photovoltaic Systems .................................................................................................................................................................................... 1969
Riad Kadri, Jean-Paul Gaubert, Gerard Champenois, Mohamed Mostefai
High Voltage Machine Mainwall Insulation Material Behavior when Exposed to Raw Natural Gas................................................ 1976
V. Sihvo, J. Nerg, J. Pyrhönen, L. Brenne
Harmonic Torque Suppression by Manual Voltage Injection ................................................................................................................ 1982
I. Karkkainen, A. Arkkio
Parameter Determionation of the BLDC Motor Considering the Dynamic Equation of Vehicle....................................................... 1988
Young-Kyoun Kim, Se-Hyun Rhyu, In-Soung Jung
Bearing Fault Detection in DFIG-Based Wind Turbines Using the First Intrinsic Mode Function................................................... 1992
Y. Amirat, V. Choqueuse, M. E. H. Benbouzid, J. F. Charpentier
Fuzzy Logic Control for Motor Flux Reduction during Steady States and for Flux Recovery in Transient States of
Indirect-FOC AC Drives.............................................................................................................................................................................. 1998
Eleftheria S. Sergaki, Najib Essounbouli, Kostas C. Kalaitzakis, George S. Stavrakakis
Modeling and Design of a Hybrid MEMS Motor ..................................................................................................................................... 2004
Christian Koechli, Sebastiano Merzaghi, Yves Perriard
Power Estimation of Electromechanical Systems Controllability........................................................................................................... 2010
M. V. Zagirnyak, T. V. Korenkova
Simple Analytical Models of the Switched Reluctance Motors, Case Study.......................................................................................... 2016
L. E. Somesan, E. Padurariu, I.-A. Viorel, Claudia Martis, O. Cornea
Elimination of the Influence of Supply Mains Low-Quality Parameters on the Results of Induction Motor
Diagnostics..................................................................................................................................................................................................... 2022
M. V. Zagirnyak, D. G. Mamchur, A. P. Kalinov
Analysis of Total Power Extracted with Common Converter Wind Farm Topology .......................................................................... 2028
Lluis Trilla, Oriol Gomis-Bellmunt, Adria Junyent-Ferre, Antoni Sudria-Andreu
Structure Deformation Analysis caused by Magnetostriction of Magnetic Steel Sheet using Combination of
Electromagnetic and Structure Analysis ................................................................................................................................................... 2034
Wataru Kitagawa, Koji Fujiwara, Yoshiyuki Ishihara
Evaluation of a Hybrid Finite Element Analysis Package Featuring Dual Air-gap Elements ............................................................ 2040
S. Gerber, J. M. Strauss, P. J. Randewijk
Design of a High Force Density Tubular Permanent Magnet Motor ..................................................................................................... 2046
M. Galea, C. Gerada, T. Raminosoa, P. Wheeler
Standstill Frequency Response Tests for Model Identification of a Synchronous Machine ................................................................ 2052
R. Grune, H. Einfeld, U. Schäfer
Average and Oscillating Torque Determination in Fractional–Slot PM Motors .................................................................................. 2058
Massimo Barcaro, Nicola Bianchi, Freddy Magnussen
Simplified Model of Induction Machine with Electrical Rotor Asymmetry.......................................................................................... 2065
Mitja Nemec, Danilo Makuc, Vanja Ambrožic, Rastko Fišer
Variable Speed Drive Air Compressors: an Analytic Approach to Energy Saving Evaluation......................................................... 2071
N. Anglani, F. Benzi
Two-Dimensional Analytical Model for Eddy-Current Rotor Loss Calculation of PMS Machines with
Concentrated Stator Windings and a Conductive Shield for the Magnets ............................................................................................ 2077
R. Nuscheler
Rotor Temperature Monitoring System .................................................................................................................................................... 2083
Martin Ganchev, Bernhard Kubicek, Hansjoerg Kappeler
Sensitivity Analysis of a Linear Model for a Vector Controlled Hybrid Stepping Motor ................................................................... 2088
S. Derammelaere, B. Vervisch, F. De Belie, J. Cottyn, G. Van den Abeele, P. Cox, K. Stockman, L. Vandevelde
A Remote Access Platform for Evaluating Electric Motors .................................................................................................................... 2093
Michael-Anthony Tedesco, M. Reza Emami
Additional Asynchronous and Pulsating Torque Analysis of 3-Phase Induction Machine ................................................................. 2099
Miroslav Skalka, Ludek Schreier, Cestmir Ondrusek, Marcel Janda
Optimal Utilization of the Bulk Material Transportation System based on Speed Controlled Drives............................................... 2104
B. Jeftenic, L. Ristic, M. Bebic, S. Štatkic, I. Mihailovic, D. Jevtic
Modelling and FE Parameter Identification of Permanent Magnet Synchronous Machines in Consideration of
Spatial Harmonics ........................................................................................................................................................................................ 2110
A. Brune, K.-H. Dempewolf, B. Ponick
A Trigonometric Technique for Characterizing Magnetic Saturation in Electrical Machines........................................................... 2116
S. Hamidifar, Narayan C. Kar
Parameter Identification of an Axial-Flux Induction Machine by Winding Functions ....................................................................... 2122
Q. Hecker, J. Igelspacher, H.-G. Herzog
Analysis of Rotor Eddy Current Loss in Fractional Slot Permanent Magnet Machine with Solid Rotor Back-Iron ...................... 2128
G. Ugalde, Z. Q. Zhu, J. Poza, A. Gonzalez
Estimation of Lithium Polymer Cell Characteristic Parameters Through Genetic Algorithms......................................................... 2134
Maurizio Paschero, Vito Di Giacomo, Guido Del Vescovo, Antonello Rizzi, Fabio Massimo Frattale Mascioli
An Iron Loss Model (Loss Surface) for FeCo Sheet and Its Application in Machine Design.............................................................. 2140
L. Li, A. Kedous-Lebouc, A. Foggia, J. C. Mipo
Automated Design of Tubular Linear Generator for Use Within Optimization Tool.......................................................................... 2146
A. Oswald, H.-G. Herzog
Assessment and Optimization of Induction Electric Motors Aiming Energy Efficiency in Industrial Applications........................ 2152
M. A. Saidel, M. C. E. S. Ramos, S. S. Alves
Prediction of Performance of a Wound-field Segmented-Rotor Flux-Switching Synchronous Motor Using a dqEquivalent Model.......................................................................................................................................................................................... 2158
A. Zulu, B. C. Mecrow, M. Armstrong
Iso Efficiency Contour Measurement Results for Variable Speed Drives ............................................................................................. 2164
Kurt Stockman, Steve Dereyne, Dirk Vanhooydonck, Wim Symens, Joris Lemmens, Wim Deprez
Noise Diagnostic of Induction Machine...................................................................................................................................................... 2170
M. Janda, O. Vitek, M. Skalka
Behavior Analysis of a DC Brush Machine by Space Vector Theory..................................................................................................... 2174
Jean-Paul Vilain, Aurelien Vauquelin, Stephane Vivier, Nicolas Labbe, Benoit Dupeux
Rotor Fault Detection in Inverter Drive Systems Using Inverter Input Current Analysis.................................................................. 2180
I. P. Georgakopoulos, E. D. Mitronikas, A. N. Safacas, I. P. Tsoumas
An Adaptive Feedback Linearization Control for Induction Motor ...................................................................................................... 2185
Cristiane Cauduro Gastaldini, Rodrigo Padilha Vieira, Rodrigo Zelir Azzolin, Hilton Abilio Grundling
Hybrid Pickup Project ................................................................................................................................................................................. 2191
S. Sgreccia, F. M. Frattale Mascioli, V. Di Giacomo, L. Martellucci, F. Calenne
A New 4/6 Pole-Changing Double Layer Winding for Three Phase Electrical Machines.................................................................... 2197
Leonard M. MELCESCU, Mihail V. CISTELECAN, Ovidiu CRAIU, H. Baris COSAN
Modeling, Analysis and Detection of Rotor Field Winding Faults in Synchronous Generators ......................................................... 2203
Rastko Fišer, Danilo Makuc, Henrik Lavric, Damijan Miljavec, Miroslav Bugeza
The Application of High-efficiency Motors for Fan Mill Drives ............................................................................................................. 2209
J. Hickiewicz, K. Macek-Kaminska, M. Kaminski, A. Gardecki
Multiple IGBTs Open Circuit Faults Diagnosis in Voltage Source Inverter Fed Induction Motor Using Modified
Slope Method................................................................................................................................................................................................. 2214
M. Trabelsi, M. Boussak, M. Gossa
Studying Rotor Eddy Current Loss of PM Machines Using Nonlinear FEM Including Rotor Motion............................................. 2220
Hung Vu Xuan, D. Lahaye, M. J. Hoeijmakers, H. Polinder, J. A. Ferreira
3-D Methodology for the Heating Hazard Assessment on Transformer Covers................................................................................... 2227
Xose M. Lopez-Fernandez, Patricia Penabad-Duran, Janusz Turowski
Analysis of a Torus Machine with Different Formats of Permanent Magnets...................................................................................... 2233
J. O. M. Osorio, A. F. Flores Filho, A. M. Tavares, L. T. R. Loureiro
Armature Reaction Field of Tubular Linear Surface-Inset Permanent Magnet Machines................................................................. 2239
Yacine Amara, Georges Barakat, Pascal Reghem
Modeling and Insulation Design Methodology in Power Transformer under Fast Transients........................................................... 2245
Xose. M. Lopez-Fernandez, C. Alvarez-Marino, D. Couto, R. Lopes, A. Jacomo-Ramos
Design of Six-phase Synchronous and Induction Machines for EPS...................................................................................................... 2251
Arthur Matyas, Gerard Aroquiadassou, Claudia Martis, Augustin Mpanda-Mabwe, Karoly Biro
Vector Control of Squirrel Cage Induction Generator for Wind Power ............................................................................................... 2257
Jose Luis Dominguez-Garcia, Oriol Gomis-Bellmunt, Lluis Trilla-Romero, Adria Junyent-Ferre
Dead-Time Compensation for PWM Amplifiers using Simple Feed-forward Techniques.................................................................. 2263
J. M. Schellekens, R. A. M. Bierbooms, J. L. Duarte
Analysis of Capacitively Driven Electromagnetic Coil Guns .................................................................................................................. 2269
Y. BENCHEIKH, Y. OUAZIR, R. IBTIOUEN
Tooth Contour Method Implementation for the Flux-Switching PM Machines................................................................................... 2274
E. Ilhan, J. Paulides, L. Encica, E. Lomonova
Internal Resonance Caused by Subharmonic Resonance of a Rotor Supported by a High-Tc Superconducting
Bearing........................................................................................................................................................................................................... 2280
Shintarou Kobayashi, Tatsuya Suda, Toshihiko Sugiura
Analysis of a Novel Double Sided Flux Switching Linear Motor Topology........................................................................................... 2286
D. C. J. Krop, L. Encica, E. A. Lomonova
Mathematical Analysis of Oscillation Characteristics of Permanent Magnet Synchronous Motor ................................................... 2291
A. Oswald, H.-G. Herzog, A. Haas
Performance Optimisation of the Brushless Motor with IPM Rotor for Automotive Applications ................................................... 2296
J. Junak, G. Ombach
Analysis of a DC XY-Actuator .................................................................................................................................................................... 2301
Aly F. Flores Filho, Nolvi F. Baggio Filho
Comparison of Permanent Magnet Brushless Motor with Outer and Inner Rotor Used in E-bike ................................................... 2307
W. Chlebosz, G. Ombach, J. Junak
Diagnosis of Induction Machines under Transient Conditions through the Instantaneous Frequency of the Fault
Components................................................................................................................................................................................................... 2312
M. Pineda-Sanchez, M. Riera-Guasp, J. Pons-Llinares, V. Climente-Alarcon, J. Perez-Cruz
Design and Testing of a Four-sided Permanent Magnet Linear Generator Prototype ........................................................................ 2318
Claudiu A. Oprea, Claudia S. Martis, Karoly A. Biro, Florin N. Jurca
Comparative Loss Analysis of Small Three-Phase Cage Induction Motors .......................................................................................... 2324
D. L. Irimie, M. M. Radulescu, J. Saint-Michel, F. Peltier
A Method to Determine the Capacitance Required by the Operation of a Grid-Connected Induction Generator.......................... 2328
Aly Ferreira Flores Filho, Carlos Sonier C. do Nascimento
A Compact Variable Speed Drive for Mobile Flywheel Energy Storage Systems ................................................................................ 2332
A. M. Knight, J. Salmon, H. Syed, B. Vafakhah, J. Ewanchuk
On the Torsional Dynamics of the Subsynchronous Cascade Drive....................................................................................................... 2338
I. P. Tsoumas, A. N. Safacas
A Simple Induction Motor Speed Estimator: Performance Evaluation from Low Speed to Field Weakening
Region ............................................................................................................................................................................................................ 2346
Matteo Carpaneto, Mario Marchesoni
Design and Comparison of Different Switched Reluctance Machine Topologies for Electric Vehicle Propulsion ........................... 2352
V. Petrus, A. C. Pop, C. S. Martis, J. Gyselinck, V. Iancu
Eccentricity and Broken Rotor Bars Faults – Effects on the External Axial Field............................................................................... 2358
A. Ceban, R. Pusca, R. Romary
Thermal Analysis of a Winding Turn-to-Turn Fault in PM Synchronous Machine ............................................................................ 2364
J. P. C. Smeets, J. Soulard, E. A. Lomonova
Influence of the Positive Sequence Voltage on the Temperature of Three-Phase Induction Motors ................................................. 2370
A. M. S. Mendes, E. C. Quispe, X. M. López Fernández, A. J. Marques Cardoso
Magnet Shape Optimization of A Slotted Surface-Mounted Axial Gap PM Motor For Reducing Cogging Torque ....................... 2376
E. Yolacan, E. Ozyurt, M. Aydin
Using Trajectory Sensitivity for Different Models and Operation Conditions for Synchronous Generator
Parameter Estimation .................................................................................................................................................................................. 2382
M. T. Mendoza, E. Ruppert, Juan C. Peqqueña Suni
Application of Data Mining and Feature Extraction on Intelligent Fault Diagnosis by Artificial Neural Network
and k-Nearest Neighbor ............................................................................................................................................................................... 2388
Behrad Bagheri, Hojat Ahmadi, Reza Labbafi
Slot-Embedded Partial Electrostatic Shield for High-Frequency Bearing Current Mitigation in Inverter-Fed
Induction Motors .......................................................................................................................................................................................... 2395
Fernando J. T. E. Ferreira, Mihail V. Cistelecan, Anibal T. de Almeida
A Guide for Synchronous Generator Parameters Determination Using Dynamic Simulations Based on IEEE
Standards....................................................................................................................................................................................................... 2401
Juan C. Peqqueña Suni, E. Ruppert, F. Fajoni
Steady-State Performance Analysis of Interior Permanent Magnet Synchronous Machines Using the Classical D-Q
Model ............................................................................................................................................................................................................. 2407
James E. Kettlewell, Narayan C. Kar
Analytical Modelling of the Magnetic Field in Axial Flux Permanent Magnet Machines with Semi-Closed Slots at
No Load ......................................................................................................................................................................................................... 2412
A. Bellara, Y. Amara, G. Barakat, P. Reghem
Performances Study of Direct coupled PM Generator based Small Wind Converters........................................................................ 2418
M. Druga, C. Nichita, G. Barakat
Design of an Efficient Distribution Transformer Based on an Expert System and FE........................................................................ 2424
C. Hernandez, M. A. Arjona
Iso Efficiency Contours as a Concept to Characterize Variable Speed Drive Efficiency..................................................................... 2429
W. Deprez, J. Lemmens, D. Vanhooydonck, W. Symens, K. Stockman, S. Dereyne, J. Driesen
Calculating Energy Consumption of Motor Systems with Varying Load using Iso Efficiency Contours.......................................... 2435
Dirk Vanhooydonck, Wim Symens, Wim Deprez, Joris Lemmens, Kurt Stockman, Steve Dereyne
Reducing PM Eddy Current Rotor Losses by Partial Magnet and Rotor Yoke Segmentation .......................................................... 2441
Dominic A. Wills, Maarten J. Kamper
Electrical Parameters Identification of Hermetic Refrigeration Compressors with Single-Phase Induction
Machines using RLS Algorithm.................................................................................................................................................................. 2447
Rodrigo Padilha Vieira, Rodrigo Zelir Azzolin, Cristiane Cauduro Gastaldini, Hilton Abilio Grundling
EHV/HV Autotransformers Modeling for Electromagnetic Transients Simulation of Power Systems............................................. 2453
L. Colla, V. Iuliani, F. Palone, M. Rebolini, C. Taricone
A RMRAC Parameter Identification Algorithm Applied to SPIM ........................................................................................................ 2459
R. Z. Azzolin, R. P. Vieira, C. C. Gastaldini, H. A. Grundling
Simple PWM Approach for Modulation of Three-leg Inverters Driving Two-phase Symmetrical and Asymmetrical
Machines........................................................................................................................................................................................................ 2465
Rodrigo Padilha Vieira, Cristiane Cauduro Gastaldini, Rodrigo Zelir Azzolin, Humberto Pinheiro, Hilton Abilio Grundling
Emulation of a Single Phase dsPIC based Grid-Connected Wind Energy Conversion System .......................................................... 2471
F. A. Ramirez, M. A. Arjona, C. Hernandez
Modeling and Experimental Set-up of an Automotive Electrical Network for Transient Studies...................................................... 2477
Marc Petit, Philippe Dessante
FEA-Based Calculation of Load Characteristics of Stand-Alone PM Generators with Inner or Outer Rotor
Constructions ................................................................................................................................................................................................ 2483
Robert Rossa, Emil Krol
Novel Modular Switched Reluctance Machine for Safety-Critical Applications .................................................................................. 2488
Mircea Ruba, Ioana Bentia, Loránd Szabó
Energy-Efficient Control of Induction Motors for Automotive Applications ....................................................................................... 2494
D. Casadei, M. Mengoni, G. Serra, A. Tani, L. Zarri, M. F. Cabanas
Load Characteristic Analysis of Three-phase Induction Motor Considering Two-dimensional Vector Magnetic
Properties ...................................................................................................................................................................................................... 2500
Naoki Kunihiro, Takashi Todaka, Masato Enokizono
Investigation of Backlash Phenomena Appearing in a Twin AC Cement Kiln Drive .......................................................................... 2506
I. X. Bogiatzidis, E. D. Mitronikas, A. N. Safacas
Field-circuit Coupled System Simulation of a PMSM Servo Drive and Comparison with Measurements ....................................... 2512
Thomas Herold, Enno Lange, Kay Hameyer
Motor Flux Minimization Controller based on Fuzzy Logic Control for DTC AC Drives.................................................................. 2517
Eleftheria S. Sergaki
Open Phase Faults Detection in PMSM Drives Based on Current Signature Analysis........................................................................ 2523
A. Khlaief, M. Boussak, M. Gossa
Review of Position Estimation Methods for IPMSM Drives Without a Position Sensor Part I: Nonadaptive
Methods ......................................................................................................................................................................................................... 2529
O. Benjak, D. Gerling
Robustness of Fuzzy Controller Based Adaptation Mechanism for MRAS Sensorless IM drives ..................................................... 2535
Z. Boulghasoul, A. Elbacha, E. Elwarraki, D. Yousfi
Review of Position Estimation Methods for IPMSM Drives Without a Position Sensor Part II: Adaptive Methods ...................... 2541
O. Benjak, D. Gerling
Failure Mechanisms and Design Considerations for Fault Tolerant Aerospace Drives ...................................................................... 2547
J. W. Bennett, B. C. Mecrow, D. J. Atkinson, G. J. Atkinson
Strong Coupling of Circuit and Field Solvers for Simulation of Rotating Electrical Machines.......................................................... 2553
Enrique Melgoza, Vicente Venegas, Rafael Escarela-Perez, Jose L. Guardado, Maximo Hernandez
Cogging Torque Reduction Methods for Internal Permanent Magnet Motors: Review and Comparison ....................................... 2559
Claudio Bianchini, Fabio Immovilli, Alberto Bellini, Matteo Davoli
Magnetic Equivalent Circuit Applied to a Unipolar PMSM ................................................................................................................... 2565
B. Nedjar, S. Hlioui, L. Vido, M. Gabsi, Y. Amara, A. Miraoui
Analytical Circuit-based Model of PMSM under Stator Inter-turn Short-circuit Fault Validated by Time-stepping
Finite Element Analysis ............................................................................................................................................................................... 2571
B. Vaseghi, N. Takorabet, F. Meibody-Tabar
Analysis of Spatial Harmonics in a Polyphase Electrostatic Induction Micromotor............................................................................ 2577
F. J. Santana–Martin, J. M. Monzon–Verona, S. Garcia–Alonso, J. A. Montiel–Nelson
Insulation Characteristics of Various Conditions for Eco-friendly High Voltage Switchgear............................................................ 2583
J. H. Lee, J. S. Ryu, H. W. Joo, S. J. Tak, S. W. Park, J. H. Lee
Analysis of an Induction Planar Actuator ................................................................................................................................................. 2587
Aly F. Flores Filho, Nolvi F. Baggio Filho
PMSM Optimal Parameters for a Specification Sheet Including Motor and Generator Operation .................................................. 2593
L. Vido, M. Ruellan, Y. Amara, H. Ben Ahmed, Mohamed GABSI
Modeling and Simulation of a Peak Current Controlled PFC Converter in Chaotic Regime ............................................................ 2599
M. Merhy, E. Chauveau, C. Morel, M. Machmoum
Impact of Voltage Sags and Continuous Unbalance on Variable-Speed Drives ................................................................................... 2605
Fernando J. T. E. Ferreira, Anibal T. de Almeida, Ge Baoming
Modern Magnetic Materials in Permanent Magnet Synchronous Motors ............................................................................................ 2611
Emil Król, Robert Rossa
Synchronous and Contouring Control for Gantry-Type Feed Drive Systems ...................................................................................... 2614
Naoki Uchiyama, Takaya Nakamura, Shigenori Sano
Bizzarrini P538 Eco Targa Project Desing and Construction of a Parallel Hybrid ............................................................................. 2619
Vito Di Giacomo, Leone Martellucci, Frattale Mascioli,Simone Sgreccia
Adaptive Input-Output Control of Linear Induction Motor Considering the End Effect................................................................... 2625
M. Abbasian
A Nonlinear Control Approach to the Energy Management of Solar Power Plant with Supercapacitor for GridIndependent Applications............................................................................................................................................................................ 2630
Phatiphat Thounthong, Pongsiri Mungporn, Bernard Davat
Fault-tolerant Characteristic Analysis of a New 12-phase PM Brushless DC Generator.................................................................... 2636
Zhuoran Zhang, Jianbin Han, Yangguang Yan
Eccentricity Diagnosis in Inverter – Fed Induction Motors via the Analytic Wavelet Transform of Transient
Currents......................................................................................................................................................................................................... 2641
J. Pons-Llinares, J. Antonino-Daviu, J. Roger-Folch, D. Moríñigo-Sotelo, O. Duque-Pérez
3D Computer Field Model of Power Transformer - Magnetic Field and Power Losses Computation .............................................. 2647
S. Wiak, P. Drzymala, H. Welfle
Research of the Turbogenerator Stability Using Field-Circuit Modeling.............................................................................................. 2653
P. Kisielewski, L. Antal
Impact of Winding Arrangement in Dual 3–phase Induction Motor for Fault Tolerant Applications.............................................. 2657
Luigi Alberti, Nicola Bianchi
Impact of Low Voltage Bushings Diameter on Single-Phase Distribution Transformers Losses ....................................................... 2663
J. C. Olivares-Galván, S. Magdaleno-Adame, E. Campero-Littlewood, P. S. Georgilakis, R. Escarela Pérez
A New Method to Discern Mechanical Unbalances from Rotor Faults in Induction Machines.......................................................... 2669
C. Concari, C. Tassoni, A. Toscani
Dynamic Force Distribution in the Magnet Array of a Commutated Magnetically Levitated Planar Actuator .............................. 2677
J. M. M. Rovers, J. W. Jansen, E. A. Lomonova
Static Ecentricity Detection in Synchronous Generators by Field Current and Stator Voltage Signature Analysis –
Part I Theory................................................................................................................................................................................................. 2683
G. Koksimovic, C. Bruzzese, E. Santini
Static Ecentricity Detection in Synchronous Generators by Field Current and Stator Voltage Signature Analysis –
Part II Measurements .................................................................................................................................................................................. 2689
G. Koksimovic, C. Bruzzese, E. Santini
Low-cost Embedded System for the IM Fault Detection using Neural Networks ................................................................................ 2694
M. Pawlak, C. T. Kowalski
Development and Analysis of a Five-Phase Pancake Shaped Switched Reluctance Motor ................................................................. 2699
Anas Labak, Narayan C. Kar
A Comparative Study for Single and Multiplayer Neural Networks Applied to Speed Estimation in Induction
Motors............................................................................................................................................................................................................ 2705
A. Goedtel, C. Graciola, S. A. O. Silva, C. F. Nascimento, M. Suetake
Basic Experiments for High-Torque, Low-Speed Permanent Magnet Synchronous Motor and a Technique for
Reducing Cogging Torque........................................................................................................................................................................... 2711
Kouichi Sato, Jung-Seob Shin, Takafumi Koseki, Yasuaki Aoyama
Adaptive Direct-Tuning Control for Diesel-Electric Power Supply Units............................................................................................. 2717
A. Lidozzi, L. Solero, F. Crescimbini
Compensation of Magnetic Core Saturation for Grid Connected Single-phase Power Converters ................................................... 2723
G. Franceschini, E. Lorenzani, A. Bellini, A. Fratta
Compensation Strategy of Actual Commutations for PV Transformerless Grid-Connected Converters ......................................... 2729
G. Buticchi, G. Franceschini, E. Lorenzani
The Current Distribution on the Elementary Conductors of the Roebel Bar ....................................................................................... 2734
Toma Dordea, Ileana Torac, Gheorghe Madescu, Victor Proca, Martian Mot, Lucian Ocolisan
Effects of Rotor Faults in Squirrel-Cage Induction Motors on the Torque-speed Curve.................................................................... 2739
Hayri Arabaci, Osman Bilgin
Design Considerations to Maximize Performance of an IPM Motor for a Wide Flux–Weakening Region ...................................... 2744
Massimo Barcaro, Nicola Bianchi, Freddy Magnussen
Control of a DC-DC Z-Source Driver used as a Synchronous Machine Excitation System ................................................................ 2751
S. J. Amodeo, H. G. Chiacchiarini, A. R. Oliva
General Formulation for the Newton-Raphson Method and the Fixed-Point Method in Finite-Element Programs ....................... 2757
Emad Dlala, Antero Arkkio
Rotor Inter-turn Short Circuit Fault Detection in Wound Rotor Induction Machines ....................................................................... 2762
A. Yazidi, H. Henao, G.A. Capolino, F. Betin
A High Performance Control Technique of Power Electronic Transformers in Medium Voltage Grid-Connected
PV Plants ....................................................................................................................................................................................................... 2768
G. Brando, A. Dannier, A. Del Pizzo, R. Rizzo
A MCSA Procedure to Diagnose Low Frequency Mechanical Unbalances in Induction Machines................................................... 2774
C. Concari, G. Franceschini, C. Tassoni
Supercapacitor-Based Ride-Through System for a 10 kW Drive Application...................................................................................... 2780
L. Mir, H. Gaztañaga, A. Lopez-de-Heredia, C. Calleja, I. Etxeberria-Otadui
Sliding Mode Control of DFIG based Variable Speed WECS with Flywheel Energy Storage ........................................................... 2786
D. Kairous, R. Wamkeue, B. Belmadani
Economic Evaluation of Transformer Selection in Electrical Power Systems ...................................................................................... 2792
Eleftherios I. Amoiralis, Marina A. Tsili, Antonios G. Kladas
Design and Performance Analysis of a Permanent-Magnet Assisted Synchronous Reluctance Machine for an
Integrated Charger Application ................................................................................................................................................................. 2797
Kashif Khan, Saeid Haghbin, Mats Leksell, Oskar Wallmark
Fundamental Saliency based Encoderless Control for Reluctance Synchronous Machines................................................................ 2803
P. Landsmann, R. Kennel, H. W. de Kock, M. J. Kamper
Comparison of Analytical and Finite Element Calculation of Eddy-Current Losses in PM Machines ............................................. 2810
A. Jassal, H. Polinder, D. Lahaye,J. A.Ferreira
Characterising Rotors for Brushless Doubly-Fed Machines (BDFM).................................................................................................... 2817
Richard McMahon, Peter Tavner, Ehsan Abdi, Paul Malliband, Darren Barker
Total Current Harmonic Distortion Analyses of Industrial UPS’s with SCR Input Converter Working in
Redundant Mode .......................................................................................................................................................................................... 2823
L. Bõjan
Load Influence on Torque and Stator Current for Induction Machines Running a Planetary Gearbox .......................................... 2827
S. M. J. Rastegar Fatemi, H. Henao, G. A. Capolino, S. Sieg-Zieba
Comparison Between SPM and IPM Motor Drives for EV Application ............................................................................................... 2834
A. Vagati, G. Pellegrino, P. Guglielmi
A Co-Simulation Platform for Evaluation of Sensorless Control Techniques for IPMSMs................................................................ 2840
G. Scelba, G. De Donato, F. Giulii Capponi, A. Consoli, O. Honorati
An Experimental Study on Stator and Rotor Defects of Squirrel Cage Induction Machines ............................................................. 2847
A. Bouzida, S. Hamdani, O. Touhami, R. Ibtiouen, M. Fadel, A. Rezzoug
A New Fuzzy Logic Direct Torque Control Scheme of Induction Motor for Electrical Vehicles Application .................................. 2852
Lamia YOUB, Aurelian CRACIUNESCU, Gloria CIUMBULEA
Designing Wind Plants for Extreme Ambient Conditions ....................................................................................................................... 2858
C. Boccaletti, P. Di Felice, E. Santini
Modeling and Control of a 6-DOF Contactless Electromagnetic Suspension System with Passive Gravity
Compensation................................................................................................................................................................................................ 2864
Chenyang Ding, J. L. G. Janssen, A. A. H. Damen, P. P. J. van den Bosch
Synchronous Operation of Dual-Inverter-Based Photovoltaic System with Low DC-Voltages .......................................................... 2870
G. Griva, V. Oleschuk
Rotor Losses in Fractional–Slot Three–Phase and Five–Phase PM Machines...................................................................................... 2876
Emanuele Fornasiero, Nicola Bianchi, Silverio Bolognani
Study of a Topology Optimization Tool Associating a Hybrid Algorithm with a Voronoï-based Formalism for the
Design of Electromagnetic Devices ............................................................................................................................................................. 2881
J. Denies, H. Ben Ahmed, F. Glineur, B. Dehez
Solution Framework for Knowledge Driven Systems in the Field of Electrical Machines .................................................................. 2887
I. Zagradišnik, M. Hadžiselimovic, B. Slemnik
Stray Losses in Power Transformer Tank Walls and Construction Parts ............................................................................................ 2891
Lenart Kralj, Damijan Miljavec
Realization of the I/f Control Method for a High-Speed Permanent Magnet Motor ........................................................................... 2895
A. Borisavljevic, H. Polinder, J. A. Ferreira
A Combined Electromagnetic and Thermal Optimisation of an Aerospace Electric Motor ............................................................... 2901
G. M. Gilson, T. Raminosoa, S. J. Pickering, C. Gerada, D. B. Hann
Prototype Based Study of Different Winding Configurations with SM2C Core................................................................................... 2908
Avo Reinap, Conny Högmark, Mats Alaküla, Tord Cedell, Mats Andersson
Design and Experimental Verification of a Sensorless-Oriented Concentrated-Winding IPMSM .................................................... 2914
Y. Kano, T. Kosaka, N. Matsui, T. Nakanishi
Instantaneous Torque Ripple Control and Maximum Power Extraction in a Permanent Magnet Reluctance
Generator Driven Wind Energy Conversion System ............................................................................................................................... 2920
Erkan Sunan, Kazmi Syed Muhammad Raza, Hiroki Goto, Hai-Jiao Guo, Osamu Ichinokura
Fourier Series Based Chacterization of Switched Reluctance Motor Using Runtime Data ................................................................ 2926
F. Kucuk, H. Goto, H. J. Guo, O. Ichinokura
Analytical Calculation of Permanent-Magnet Synchronous Machines Using Saturation-Dependent Poleform
Coefficients .................................................................................................................................................................................................... 2932
R. Helmer, B. Ponick
SPWM on DSP: Frequency Control in Feed Signal to Study the Acoustic Noise in Electrical Motors.............................................. 2938
F. R. Lara, F.J. Jiménez, V. Barranco
Analysis and Design of a Position Observer With Stator-Resistance Adaptation for PMSM Drives................................................. 2942
Marko Hinkkanen, Toni Tuovinen, Lennart Harnefors, Jorma Luomi
Single-Phase Axial Flux Claw Pole Motor for High Effieiency Applications ........................................................................................ 2948
M. Andriollo, G. Bettanini, A. Tortella
Analysis of Split-Phase Electric Machines with Unequally-Loaded Stator Windings and Distorted Phase Currents ..................... 2954
A. Tessarolo
Nonlinear Model of a Wound Iron Core Traction Transformer with the Account of Magnetic ........................................................ 2961
A. Wilk, J. Nieznanski, I. Moson
Detection of Inter-Turn Short-Circuit and Broken Rotor Bars in Induction Motors Using the Partial Relative
Indexes: Application on the MCSA ............................................................................................................................................................ 2968
S. E. Zouzou, M. Sahraoui, A. Ghoggal, S. Guedidi
A Permanent-Magnet Synchronous Motor Drive for Reaction Wheel Application ............................................................................. 2974
M. C. Chou, C. M. Liaw
Efficiency Compensation of Multi-phase PM Motor with Redundant Structure ................................................................................. 2980
Ho-Yong Choi, Sun Jung Park, Man Li Lee, Y. K. Kong, J. G. Bin
A Comparison Between Transverse Flux and Conventional Switched Reluctance Machines ............................................................ 2983
H. M. Amreiz
Design and Analysis of a Medium Voltage DC Wind Farm with a Transformer-less Wind Turbine Generator............................. 2991
Maria Stefania Carmeli, Francesco Castelli-Dezza, Gabriele Marchegiani, Marco Mauri, Daniele Rosati
A Vehicle with Very Low Fuel Consumption: Realization, Analysis and Optimization ..................................................................... 2997
Maria Stefania Carmeli, Francesco Castelli Dezza, Gianmarco Galmarini, Marco Mauri, Luigi Piegari
Torque and Losses in the Metallic Shell of a Dual Mechanical Port PM Electrical Machine, for Dangerous Fluid
Pumps............................................................................................................................................................................................................. 3003
A. Di Gerlando, G. Foglia, M. Iacchetti, R. Perini, F. Gatelli, L. Armellin
Modeling of Microwave Absorbing Structure using Winning Particle Optimization Applied on Electrically
Conductive Nanostructured Composite Material..................................................................................................................................... 3009
Davide Micheli, Carmelo Apollo, Roberto Pastore, Mario Marchetti
High Performance Traction Motor Design and Construction for Small Passenger Electric Car ....................................................... 3019
Konstantinos I. Laskaris, Antonios Chaniotis, Antonios G. Kladas
Simultaneous Estimation of Speed and Rotor Resistance in Sensorless ISFOC Induction Motor Drive Based on
MRAS Scheme .............................................................................................................................................................................................. 3025
Y. Agrebi Zorgani, Y. Koubaa, M. Boussak
Optimization of a Transverse Flux Linear PM Generator Using 3D Finite Element Analysis ........................................................... 3031
J. Schutte, J. M. Strauss
Simulation of a DFIG-Based Wind Turbine with Active Filtering Function using Matlab/Simulink................................................ 3037
H. Djeghloud, A. Bentounsi, H. Benalla
Speed & Position Estimation by Demodulating Rotor Slot Harmonics ................................................................................................. 3044
Ozan Keysan, H. Bulent Ertan
A New Analytical Model of IPM Motor based on Magnetic Reluctance Matrix .................................................................................. 3050
H. Goto, O. Ichinokura
Optimal Design of PM Motors to Achieve Efficient Flux Weakening Strategy in Variable Speed Control
Applications................................................................................................................................................................................................... 3054
S. Chaithongsuk, B. Nahid-Mobarakeh, N. Takorabet, J. P. Caron, F. Meibody-Tabar
Hand-on Experiments and Computer-aided Simulations for Sustaining the IM Course .................................................................... 3060
A. Bentounsi, H. Djeghloud
Optimized Control Approach Applied to a Linear Step Actuator.......................................................................................................... 3066
R. Saadaoui, I. Amdouni, L. El Amraoui, F. Gillon, P. Brochet
A Reduced Losses Field Oriented Control for Plug-in Hybrid Electrical Vehicle................................................................................ 3071
M. Mauri, F. L. Mapelli, D. Tarsitano
Axial Flux PM Machine for Low Wind Power Generation ..................................................................................................................... 3077
Werner Jara, Alejandro Martin, Juan A. Tapia
Combined BLDCM and Encoderless PMSM Control for Electric Hub Motor Drives........................................................................ 3082
Driss Yousfi, Abdellah Ait Ouahman, Abdelhadi Elbacha, Zakaria Boulghasoul
A Ferrite Permanent Magnet Axial Gap Motor with Segmented Rotor Structure for the Next Generation Hybrid
Vehicle............................................................................................................................................................................................................ 3088
Takahiko Miura, Shinji Chino, Masatsugu Takemoto, Satoshi Ogasawara, Akira Chiba, Nobukazu Hoshi
High Performance Power Converter for Combined Batteries-Supercapacitor Systems ..................................................................... 3094
C. Attaianese, M. Di Monaco, G. Tomasso
An Improved PWMwm for a Dual Two-level Inverter Fed Open-end Winding Induction Motor Drive.......................................... 3100
K. Ramachandrasekhar, Shravan Mohan, S. Srinivas
Analytical Prediction of Eddy Current Losses in Retaining Sleeves for Surface Mounted PM Synchronous
Machines........................................................................................................................................................................................................ 3106
M. Lazzari, A. Miotto, A. Tenconi, S. Vaschetto
A Comparison of the Vibration Characteristics of a Rotating Machine with a Linear and a Keyed Shaft....................................... 3112
F. Oliveira, G. Peláez, M. P. Donsión
Design of a Wavelet Multiresolution Controller for a Fuel Cell Powered Motor Drive System ......................................................... 3116
S. Tsotoulidis, E. Mitronikas, A. Safacas
Linear Generator for Direct Drive Wave Energy Applications .............................................................................................................. 3122
Neil Hodgins, Ozan Keysan, Alasdair McDonald, Markus Mueller
Comparison between an Analytic Method and a Numerical Calculation to Determine the End Winding
Inductances of a Turbo Generator ............................................................................................................................................................. 3128
M. Freese
Consequent-Pole Brushless Machines Featuring Uneven Magnet-Pole Width Ratio .......................................................................... 3133
P. Bolognesi, F. Papini, V. Biagini
On-Line Tracking of the MTPA Trajectory in IPM Motors Via Active Power Measurement........................................................... 3139
Silverio Bolognani, Roberto Petrella, Antonio Prearo, Luca Sgarbossa
An Integrated Electromechanical Actuator for High Dynamic Pump Application.............................................................................. 3146
E. Chiricozzi, M. Tursini, M. Villani, L. Castellini
Current Transformer Analysis under Transient Conditions .................................................................................................................. 3152
P. Rafajdus, P. Bracinik, V. Hrabovcova, J. Saitz, L. Kankula
Optimal Design of Electromagnetic Acoustic Transducer....................................................................................................................... 3158
Eiji Matsumoto, Shinji Kitamura, Jun Abe
Continuation Method Applied to a Power System Analysis of Voltage Stability.................................................................................. 3164
H. Aloui, F. Bacha, M. Gasmi
Skewing Effect on Interior Type BLDC Motors ....................................................................................................................................... 3170
Y. Dönmezer, L. T. Ergene
Definition of the Magnetic Circuit Topology of a Dental Attachment ................................................................................................... 3175
Valérie LASMOLLES, Bertrand NOGAREDE
Design of Robust Optimal Linear Parameter Varying (LPV) Controller for DC Servo System ........................................................ 3179
Yucel Aydin
Design of Power-Assisted Motor for Vehicle Air-Conditioning Systems ............................................................................................... 3185
Yee-Pien Yang, Hsing-Feng Liu, Jieng-Jang Liu
Theoretic and Experimental Preliminary Approach to the Adoption of Bonded Magnets in Fractional Machines ........................ 3190
L. Ferraris, P. Ferraris, E. Poškovic, A. Tenconi
An Experimental Switched-Reluctance Generator based Distributed Power System.......................................................................... 3196
Y. C. Chang, C. H. Cheng, L. Y. Lu, C. M. Liaw
Simulation of Saturated Salient Pole Synchronous Machines................................................................................................................. 3202
M. Stiebler, A. Campeanu
Instrumentation and Experimental Investigation of Industrial DC Machines for Condition Monitoring Purposes ....................... 3208
Galina Mirzaeva, Terrence J.Summers, Robert E.Betz
Performance Evaluation of Space Vector Modulation Controlled Inverter Fed Variable Speed Wind Generator
During Permanent Fault.............................................................................................................................................................................. 3214
S. M. Muyeen, J. Tamura
Ballistic Characterization og Nanocomposite Materials by Means of “Coil Gun” Electromagnetic Accelerator ............................ 3221
Davide Micheli, Gabriele Gradoni, Roberto Pastore, Carmelo Apollo, Mario Marchetti
Thermal Design of Linear Generators for Wave Energy Converters .................................................................................................... 3227
Ciro Attaianese, Silvio Carbone, Fabrizio Marignetti
Grid Interfacing of a Small Scale DC-based Wind Farm using Fuzzy Logic Controlled Inverter System........................................ 3235
S. M. Muyeen
Design of a Turbo-Expander Driven Generator for Energy Recovery in Automotive Systems.......................................................... 3241
F. Mergiotti, F. Crescimbini, L. Solero, A. Lidozzi
Indirect Discrete–Time Sliding Mode Torque Control of Induction Motors ........................................................................................ 3247
B. Castillo–Toledo, S. Di Gennaro, M. I. Galicia, A. G. Loukianov, J. Rivera
Theoritical and Experimental Results of Tubular Linear Induction Generator for Stirling Cogenerator System .......................... 3253
Thu Thuy Dang, P. Francois, L. Prevond, H. Ben Ahmed
Complex Dynamic Model of a Multi-phase Asynchronous Motor ......................................................................................................... 3260
Roberto Zanasi, Giovanni Azzone
Study of Inductor Effects in a Bidirectional DC-DC Converter for Electrical Vehicle........................................................................ 3266
João P. Trovão, Paulo G. Pereirinha, Fernando J. T. E. Ferreira, Humberto M. Jorge
Synchronous Generators for All Electric Cruise Liners: Evolution, Requirements and Future Trends........................................... 3272
Massimo Baret, Aldo da Rin, Giorgio Sulligoi
Discussion about Formulations and Resolution Techniques of Electrical Machine Design Problems ............................................... 3277
Sonia Cafieri, Leo Liberti, Frederic Messine, Bertrand Nogarede
D-Q Axis Theory of Thermomagnetic Curie Motor ................................................................................................................................. 3282
Marco Trapanese
Fast Steady-State Parallel Solution of the Induction Machine................................................................................................................ 3286
Rafael Peña, Aurelio Medina
FEM Modeling and Analysis of a Novel Rotary-Linear Isotropic Brushless Machine ........................................................................ 3291
P. Bolognesi, F. Papini
Modeling and Control of a Rotary-Linear Drive Using a Novel Isotropic Brushless Machine........................................................... 3297
P. Bolognesi, V. Biagini
Design Criteria of On-board Propulsion for Hybrid Electric Boats....................................................................................................... 3303
A. Del Pizzo, R. M. Polito, R. Rizzo, P. Tricoli
Observer-based Sensorless Control of a Five-phase Brushless DC Motor ............................................................................................ 3309
G. Fabri, C. Olivieri, M. Tursini
Optimal Size Selection of Step-up Transformers in Pv Plants ................................................................................................................ 3315
A. Testa, S. De Caro, R. La Torre, T. Scimone
Author Index