The Signal Source continues to provide customers with the largest selection and highest quality audible and visual signaling products engineered to deliver uncompromising levels of performance and reliability. Fire Alarm and Special Hazard Signaling, our specialty! The Signal Source has the industry’s most extensive line of unique audible and synchronized visual signals specifically configured and listed for use with fire alarm and suppression supervised control panels and power boosters. SYNCRONIZED HAZARDOUS LOCATION STROBE LIGHTS The Signal Source can supply you with a complete offering of “ Public Mode” UL1971 and UL1638 “Private Mode” synchronized strobes lights suitable for Class 1 Division 1 Explosion proof, Class 1 Division 2 Hazardous locations and NEMA 4X rated strobe light suitable for wet and corrosive environments. HIGH OUTPUT HAZARDOUS LOCATION SPEAKERS and AMPLIFIED SPEAKERS To complement our strobe light offering is our comprehensive offering of 15 and 30 watt Amplified Speakers & Speakers suitable for Class 1 Division 1 Explosion proof, Class 1 Division 2 Hazardous locations and NEMA 3R & 4X rated devices suitable for wet and corrosive environments. Whether your needs require a Marine rated NEMA 4X UL1971 listed strobe light or a UL1971 listed Class 1 Division 1 Explosion-proof strobe light, The Signal Source can meet your requirements. Our warehouses are well stocked with listed Class 1 Division Explosion proof and Class 1 Division 2 strobe lights, horns, speakers and pull stations. Our applications specialists are waiting to provide you assistance in determining and recommending the best products at reasonable cost for your application. The Signal Source • P.O. Box 10330, Palm Desert CA 92255‐0330 • 866‐548‐2331 / 760‐341‐3609 • www.TheSignalSource.com 0 0 7 Sync. Strobe Lights – NEMA 4X - FB24ST, 224XT, 154XST Sync. Strobe Lights – FSEX, Sync Mod. SSM, MPEX pull Sync. Strobe Light – Exp. Proof FSEX-HI, UL1971 Sync. Strobe Light – Class 1 Div. 2, 224XST-HI, UL1971 Sync. Strobe Light – FB24STHI, NEMA 4X, UL1971 Sync. Strobe Light – Exp. Proof FSEX, UL1638 Sync. Strobe Light – Class 1 Div. 2, 224XST UL1638 Strobe Light – Class 1 Div. 2,, NEMA 4X ,UL1638 Sync. Strobe Light – FB24ST, NEMA 4X ,UL1638 Amplified Speakers – ASLP.ASHP.ASHH, ASHX Amplified Speakers –.ASUP.ASUH, ASUX EXP. HORN – FHEX-24SMR Speakers – AM50R, AM300R, AM300GCX-R, AM300X-R Speakers – AM302R, AM302GCX-R, AM302X-R Yodalex YL60 – Exp. Horn / Strobe, UL464 & 1638 Exp. Proof Heat Detectors Standard Fire Alarm Models & Custom Exp. Proof Pull Honeywell HPFF 12 amp NAC Expander ALTRONIX 6,8 & 10 amp NAC Expanders Synchronized, NEMA 4X Federal Signal strobe lights are designed for heavy duty use in a variety of environments…indoors, outdoors, hazardous locations and explosion proof environments. Superior optics and state of the art printed circuit board designs ensure long life. Strobe lights are available for use in UL1971 Hearing Impaired applications. To synchronize these strobes, purchase the Federal Signal SSM Synchronous Strobe Module. The 24VDC strobe lights feature an in-rush limiting PCB design for greater compatibility with control systems. STROBE LIGHTS TO INDEX FB24ST FB24ST-HI 224XST / 224XST-HI 154XST INDOOR / OUTDOOR HAZARDOUS AREAS HAZARDOUS AREAS • 4-wire, 24VDC • 4-wire, 24VDC • 4-wire, 24VDC • FB24ST-HI - clear dome • 224XST-HI - clear dome • FB24ST - amber, blue, green or red domes • 224XST - amber, blue, green or red domes • Available with amber, blue, green or red glass domes • Synchronize w/SSM Module • Synchronize w/SSM Module • 10,000 hour lamp • Integrated 1/2” pipe and surface mounts • 1/2” pipe mount • 3/4” pipe mount • In-rush limiting PCB • Dome guard included • UL Listed, CSFM Approved, 224XST-HI is UL1971 Listed • UL Listed, CSA Certified, CSFM • Type 4X, IP66 • Class I, Div. 2, Groups A, B, C & D; Class II, Div. 1, Groups E, F & G; Class III • In-rush limiting PCB • UL Listed, CSFM Approved, FB24ST-HI is UL1971 Listed • Type 4X, IP66 • Type 4X, IP66 • Class I, Div. 2, Groups A, B, C & D; Class II, Div. 2, Groups F & G; Class III STROBE LIGHTS Model Voltage Operating Current Peak In-Rush UL Listing UL1971 OnAxis Candelas Effective Candlepower1 Flash Rate/ Minute FB24ST 24VDC 0.75 amps 2.0 amps UL1638 - 300 80 FB24ST-HI 24VDC 0.75 amps 2.0 amps UL1971 15 300 80 224XST 24VDC 0.75 amps 2.0 amps UL1638 - 240 80 224XST-HI 24VDC 0.75 amps 2.0 amps UL1971 15 240 80 154XST 12-24VDC 1.3-0.60 amps - UL1638 - 165 80 FSEX 24VDC 1.0 amps 1.9 amps UL1638 - 850 80 FSEX-HI 24VDC 1.9 amps 3.0 amps UL1971 150 850 80 1 Effective candlepower is the intensity that would appear to an observer if the light was burning steadily. HORNS FSEX / FSEX-HI Federal Signal horns produce a loud and distinctive tone by the electromechanical vibration of a stainless steel diaphragm. SSM FHEX EXPLOSION PROOF • 4-wire, 24VDC • FSEX-HI - 150cd per UL1971 • FSEX - amber and red domes • Synchronize w/SSM Module • 3/4” pendant mount std., Wall mount - WMXC-R • In-rush limiting PCB • UL Listed, CSFM Approved, FSEX-HI is UL1971 Listed SYNCHRONOUS STROBE MODULE • Synchronize Federal Signal strobes EXPLOSION PROOF VIBRATING HORN • Screw terminal capacity to #18AWG • Mounts to 4” square electrical box • 4-wire, 24VDC • 3/4” conduit • Low profile installation • Type 4X • UL Listed, CSFM • UL Listed, CSFM • Cast aluminum housing • Class I, Div. 1, Groups C & D; Class II, Div. 1, Groups E, F & G; Class III • Type 4X, IP66 • Class I, Div. 1, Groups C & D; Class II, Div. 1, Groups E, F & G; Class III MPEX Explosion Proof Pull Station • Lift cover and pull down to activate • 3/4” conduit • UL Listed, CSFM Approved • NEMA Type 7 and 9 • Class I, Div. 1, Groups C & D; Class II, Div. 1, Groups E, F & G; Class III HORNS Model Voltage Operating Current FHEX 24VDC 1.20 amps UL dB(A) Sound Pressure dB(A) Sound Power 94 109 INDEX DGXC CMXC WMXC-R 760-341-3609 / 866-548-2331 WWW.THESIGNALSOURCE.COM F E D E R A L S I G N A L C O R P O R A T I O N VISUAL SIGNALING DEVICE (FSEX) 4.5"/ 114.3 mm 3/4” Pendant 4"/101.6 mm Electrical Connection Block Cast Aluminum Corrosion Resistant Explosion Proof Housing 15.63"/397 mm High Intensity Strobe Tube Glass Dome 6.36"/162 mm 8.82"/224 mm S P E C I F I C AT I O N S Operating Temperature: Lamp Life*: Lamp Style: Net Weight: Shipping Weight: Height: Diameter: -13°F to 149°F 10,000 hours Strobe 14 lbs. 18.1 lbs. 15.63" 8.82" DISTRIBUTOR * Optimal hours under ideal conditions. HOW TO ORDER -25°C to 65°C 10,000 hours Strobe 6.4 kg 8.2 kg 397 mm 224 mm • Specify model number • Specify options: CMXC, Ceiling Mount WMXC, Wall Mount SSM, Synchronization Module INDEX ELECTRARAY ® HAZARDOUS LOCATION WARNING LIGHT (224XSTHI) 5.5"/139.7 mm Outer Dome Strobe Tube Inner Fresnel Lens 7.5"/190.5 mm Retaining Screw 1/2" Pipe Mount S P E C I F I C AT I O N S Lamp Life*: Lamp Style: Operating Temperature: Net Weight: Shipping Weight: Height: Diameter: HOW TO ORDER 10,000 Hours Strobe -31°F to 150°F 1.5 lbs. 2.0 lbs. 7.5" 5.5" 10,000 Hours Strobe -35°C to 66°C 0.68 kg 0.9 kg 190.5 mm 139.7 mm • Specify model, voltage and color • Please refer to Model Number Index 224XSTHI beginning on page 381 * Optimal hours under ideal conditions. R E P L A C E M E N T PA RT S Description Exterior Dome, Clear Interior Lens, Clear Strobe Tube Part Number K8444D219C-04 K8550C095A K8107177A 2645 Federal Signal Dr., University Park, IL 60466 Tel: 708.534.4756 Description Part Number PC Assembly, 24VDC Fax: 708.534.4852 K2001202C-01 www.federalsignal-indust.com 327_368_62362_FedSig.qxd 2/1/08 4:59 PM Page 350 FEDERAL SIGNAL CORPORATION INDEX Fireball ® Super vised Hearing Impaired Strobe Warning Light Model FB24STHI LIGHT DUTY STROBE LIGHT • Available in 24VDC • Four wires and supervisory diode • Clear dome • 10,000 hour strobe tube • Integrated 1/2 - inch pipe mount and surface mount • Type 4X, IP66 enclosure • In-rush protected • UL1971 Listed • UL Listed and CSFM Approved Federal Signal’s brightest and most compact strobe light, this supervised FireBall® emits a powerful "lightning bolt" flash of light. Approximately five inches tall and four inches in diameter and rated at 300 effective candela, the FB24STHI is economical and effective. The Fireball is available in 24VDC, this model is UL Listed and CSFM Approved. The FB24PSTHI features a voltage in-rush limiting PCB design that provides greater compatibility with control systems and panels and less electrical interference with in-rush sensitive devices. The FB24STHI features a clear dome that twists off easily for quick dome and lamp replacements. The newly redesigned base features an integrated 1/2" pipe mount boss as well as the three holes required for surface mount configurations. Black epoxy paint is electrostatically applied to the base for superior corrosion resistance. The Fireball dome and base design provides a watertight, dust-tight and corrosion resistant Type 4X rating. The Fireball FB24STHI contains a supervisory diode and four wire leads, for use in fire alarm applications. This strobe is UL 1971 listed, for hearing impaired applications. Model Voltage Operating Current Flash Rate/ Minute Candela Peak1 ECP2 FB24STHI 24VDC 0.7 amps 80 1,000,000 (2.0 amp, in-rush) 1 2 5 yyr WA RRANT Y Peak candela is the maximum light intensity generated by a flashing light during its light pulse ECP (Effective Candela) is the intensity that would appear to an observer if the light were burning steadily 300 Mount /2" Pipe/Surface 1 327_368_62362_FedSig.qxd 1/27/08 1:30 PM Page 351 FIREBALL ® STROBE WARNING LIGHT (FB24STHI) 4.1"/100.1 mm Impact-Resistant Fresnel Dome High-Powered Strobe Tube 5.25"/133.4 mm Easy-Access Twist-off Dome Built-In Strobe Power Supply 1/2" Pipe Mount and 3-hole Surface Mount S P E C I F I C AT I O N S Lamp Life*: Lamp Style: Operating Temperature: Net Weight: Shipping Weight: Height: Diameter: HOW TO ORDER 10,000 Hours Strobe -31°F to 150°F 1.45 lbs. 1.7 lbs. 5.25" 4.1" 10,000 Hours Strobe -35˚C to 66˚C 0.7 kg 0.8 kg 133.4 mm 100.1 mm • Specify model, voltage and color • Specify options: Corner Bracket (LCMB2)* Wall Bracket (LWMB2)* • Please refer to Model Number Index FS24STHI beginning on page 381 * Brackets not Type 4X rated. * Optimal hours under ideal conditions. R E P L A C E M E N T PA RT S Description PC Assembly, 24VDC Dome, Clear Strobe Tube Part Number K2001202C K8550320A-02 K8107177A 2645 Federal Signal Dr., University Park, IL 60466 Tel: 708.534.4756 Fax: 708.534.4852 www.federalsignal-indust.com INDEX DGXC CMXC WMXC-R 760-341-3609 / 866-548-2331 WWW.THESIGNALSOURCE.COM F E D E R A L S I G N A L C O R P O R A T I O N VISUAL SIGNALING DEVICE (FSEX) 4.5"/ 114.3 mm 3/4” Pendant 4"/101.6 mm Electrical Connection Block Cast Aluminum Corrosion Resistant Explosion-Proof Housing 15.63"/397 mm High Intensity Strobe Tube Fresnel Lens Glass Dome 6.36"/162 mm 8.82"/224 mm S P E C I F I C AT I O N S -13°F to 149°F 10,000 hours Strobe 14 lbs. 18.1 lbs. 15.63" 8.82" DISTRIBUTOR Operating Temperature: Lamp Life*: Lamp Style: Net Weight: Shipping Weight: Height: Diameter: HOW TO ORDER -25°C to 65°C 10,000 hours Strobe 6.4 kg 8.2 kg 397 mm 224 mm • Specify model number • Specify options: CMXC, Ceiling Mount WMXC, Wall Mount INDEX ELECTRARAY ® HAZARDOUS LOCATION WARNING LIGHT (224XST) 5.5”/139.7 mm Outer Dome Strobe Tube Inner Fresnel Lens 7.5”/190.5 mm Retaining Screw 1/2” Pipe Mount SPECIFICATIONS Lamp Life*: Lamp Style: Operating Temperature: Net Weight: Shipping Weight: Height: Diameter: HOW TO ORDER 10,000 Hours Strobe -31°F to 104°F 1.5 lbs. 2.0 lbs. 7.5” 5.5” 10,000 Hours Strobe -35°C to 40°C 0.68 kg 0.9 kg 190.5 mm 139.7 mm • Specify model, voltage and color • Please refer to Model Number Index 224XST beginning on page 381 * Optimal hours under ideal conditions. REPLACEMENT PARTS Description Interior Lens Amber Blue Clear Green Magenta Red Part Number K8550C095A-02 K8550C095A-01 K8550C095A K8550C095A-04 K8550C095A-07 K8550C095A-03 Description Exterior Dome, Clear PC Assembly, 24VDC Strobe Tube 2645 Federal Signal Dr., University Park, IL 60484 Tel: 708.534.4756 Fax: 708.534.4852 Part Number K8444D219C-04 K2001202C-01 K8107177A www.federalsignal-indust.com INDEX LHWB Class 1 Div 2 Wall Bracket HAZARDOUS LOCATION STROBE LIGHT (154XST) 5.5”/139.7 mm Dome Guard (Included) Glass Dome Strobe Tube 9.25”/ 235 mm Gasket 3/4” Pipe Mount Aluminum Base Power Wires SPECIFICATIONS Lamp Life1: Lamp Style: Operating Temperature2: Op. Temp. Factory Tested3: Net Weight: Shipping Weight: Height: Diameter: HOW TO ORDER 10,000 Hours Strobe -31°F to 104°F -67°F to 104°F 3.8 lbs. 4.5 lbs. 9.25” 5.5” 10,000 Hours Strobe -35°C to 40°C -55°C to 40°C 1.7 kg 2.0 kg 235 mm 139.7 mm • Specify model, voltage and color • Please refer to Model Number Index 151XST beginning on page 376 1 Optimal hours under ideal conditions. 2 Tested to UL and cUL Standards. 3 Tested according to ULC test procedures. REPLACEMENT PARTS Description Series C Dome and Ring Assembly* Dome & Ring Assembly, Amber Dome & Ring Assembly, Blue Dome & Ring Assembly, Clear Dome & Ring Assembly, Green Dome & Ring Assembly, Red Dome & Ring Assembly, Magenta Part Number K8449078C-01 K8449078C-02 K8449078C-04 K8449078C-03 K8449078C K8449078C-05 Description PC Assembly, 24VDC Strobe Tube Dome Gaskets Guard Part Number K2001173A K149122B K8449080B K8449090B * Call the factory for Series A and B part numbers. 2645 Federal Signal Dr., University Park, IL 60484 Tel: 708.534.4756 Fax: 708.534.4852 www.federalsignal-indust.com 327_368_62362_FedSig.qxd 2/7/08 3:55 PM Page 348 FEDERAL SIGNAL CORPORATION INDEX Fireball ® Super vised Strobe Warning Light Model FB24ST LIGHT DUTY STROBE LIGHT • Available in 24VDC • Four wires and supervisory diode • Six dome colors • 10,000 hour strobe tube • Integrated 1/2 - inch pipe and surface mount • Type 4X, IP66 enclosure • CSFM Approved • CSA Certified • UL and cUL Listed Federal Signal’s brightest and most compact strobe light, the Fireball® Supervised Warning Light emits a powerful "lightning bolt" flash of light. Approximately five inches tall and four inches in diameter and rated at 300 effective candela, the FB24ST is an economical solution to a wide variety of stationary requirements. The Fireball is available in 24VDC. All models are UL and cUL Listed, CSA Certified and CSFM Approved. The 24VDC FB24ST features a voltage in-rush limiting PCB design that provides greater compatibility with control systems and less electrical interference with in-rush sensitive devices. The FB24ST features a unique dome that twists off easily for quick dome and lamp replacements. The newly redesigned base features an integrated 1/2-inch pipe mount boss as well as the three holes required for surface mount configurations. Black epoxy paint is electrostatically applied to the base for superior corrosion resistance. The Fireball dome and base design provides a watertight, dust-tight and corrosion resistant Type 4X rating. The FB24ST contains a supervisory diode and four wire leads, for use in fire alarm applications. The FB24ST can be used in any application where a superior visual signal is needed. It is especially effective in the warning of industrial hazards, process control, status indication and in areas with high ambient noise levels. Federal Signal’s Fireball Supervised Strobe is a very lowmaintenance warning light for industrial applications where a vibration-resistant light is required to signal an emergency or process status. 5 yyr WA RRANT Y Model Voltage Operating Current Flash Rate/ Minute Candela Peak1 ECP2 FB24ST 24VDC 0.7 amps 80 1,000,000 300 (2.0 amp, in-rush) 1 2 Peak candela is the maximum light intensity generated by a flashing light during its light pulse ECP (Effective Candela) is the intensity that would appear to an observer if the light were burning steadily Mount /2" Pipe/Surface 1 327_368_62362_FedSig.qxd 1/27/08 1:29 PM Page 349 FIREBALL ® STROBE WARNING LIGHT (FB24ST) 4.1"/100.1 mm Impact-Resistant Fresnel Dome High-Powered Strobe Tube 5.25"/133.4 mm Easy-Access Twist-off Dome Built-In Strobe Power Supply 1/2" Pipe Mount and 3-hole Surface Mount S P E C I F I C AT I O N S Lamp Life*: Lamp Style: Operating Temperature: Net Weight: Shipping Weight: Height: Diameter: HOW TO ORDER 10,000 Hours Strobe -31°F to 150°F 1.45 lbs. 1.7 lbs. 5.25" 4.1" 10,000 Hours Strobe -35˚C to 66˚C 0.7 kg 0.8 kg 133.4 mm 100.1 mm • Specify model, voltage and color • Specify options: Corner Bracket (LCMB2)* Wall Bracket (LWMB2)* • Please refer to Model Number Index FB24ST beginning on page 381 * Brackets not Type 4X rated. * Optimal hours under ideal conditions. R E P L A C E M E N T PA RT S Description Dome, Amber Dome, Blue Dome, Clear Dome, Green Dome, Red Dome, Magenta Part Number K8550320A K8550320A-01 K8550320A-02 K8550320A-03 K8550320A-04 K8550320A-05 2645 Federal Signal Dr., University Park, IL 60466 Tel: 708.534.4756 Description Part Number PC Assembly, 24VDC Strobe Tube, Series A, A1, A2, A3 Strobe Tube, Series A4, A5, B Fax: 708.534.4852 K2001202C Call Factory K8107177A www.federalsignal-indust.com Factories…refineries…offices….hazardous areas….Federal Signal offers an Amplified Speaker for every environment. Federal Signal Amplified Speakers are designed to produce crisp, clear tones in supervised alarm notification systems. They are compatible with fire alarm and suppression supervised control panels and power boosters. Amplified Speakers can broadcast tones generated by a Tone Card installed into the speaker or by a central tone source in a 25 or 70VRMS voice evacuation or paging system. Models are available with and without UL1971 Strobes. All amplified speakers are UL 1480 certified. AMPLIFIED SPEAKERS INDEX ASLP ASHH / ASUH ASHP / ASUP ASHP ASLP ASUH INDOOR AND OUTDOOR USE INDOOR AND OUTDOOR USE HAZARDOUS LOCATIONS • 24VDC; filtered and unfiltered • 24VDC; filtered and unfiltered • 24VDC; filtered and unfiltered • UL 1480 certified • UL 1480 certified • UL 1480 certified • UL Listed, CSA Certified, CSFM Approved • UL Listed, CSA Certified, CSFM Approved • UL Listed, CSA Certified, CSFM Approved • Flush or surface mount • Surface mount • Type 4X • Type 3R with WB-R weatherproof back box • Type 3R • Class I, Div. 2, Groups A,B,C,D; Class II, Div. 2, Groups F,G; Class III • 97dB(A) AMPLIFIED SPEAKERS • External mounting tabs • Choice of two models ASHP – 112dB(A) ASUP – 118dB(A) • Choice of two models ASHH – 112dB(A) ASUH – 118dB(A) System Standby Current UL dB(A) Sound Pressure dB(A) Sound Power UTM Universal Tone Module Model Voltage Operating Current ASLP 24VDC 0.07 amps 0.025 amps 82 97 ASHP 24VDC 0.7 amps 0.06 amps 97 112 ASUP 24VDC 1.10 amps 0.03 amps 103 118 ASHH 24VDC 0.7 amps 0.06 amps 97 112 • 32 tones ASUH 24VDC 1.10 amps 0.03 amps 103 118 ASHX 24VDC 0.7 amps 0.06 amps 97 112 • Plugs into each Amplified Speaker ASUX 24VDC 1.10 amps 0.03 amps 103 118 • RFI and EMI shielded Note: 1 Sound & current ratings reflect ratings taken at nominal 24VDC. 2 Nominal voltage of amplified speakers is 24VDC. Voltage range at 24VDC, -15%, +10%. • Tone only applications INDEX F E D E R A L S I G N A L C O R P O R A T I O N EXPLOSION PROOF VIBRATING HORN Model FHEX The Federal Signal Model FHEX Explosion Proof Vibrating Horn produces a loud and distinctive tone by the electromechanical vibration of a diaphragm. This horn is designed for use in alarm notification systems and is compatible with fire alarm and suppression supervised control panels and power boosters. The Model FHEX operates on 24VDC and produces a very loud 100dB at ten feet (110dB at one meter). The FHEX is UL Listed for Class I, Division 1, Groups C & D; Class II, Division 1, Groups E, F, and G; and Class III. DESIGNED FOR USE IN EXPLOSION-PROOF ATMOSPHERES The FHEX is housed in a heavy duty, copper free cast aluminum housing tapped for 3/4” conduit. The housing is sealed with red powder coat paint and utilizes a stainless steel diaphragm for long life. • Available in 24VDC • Cast aluminum housings • Produces 100dB @ 10' (110dB @ 1m) • NEMA 4X, IP66 enclosure • UL and cUL Listed, CSA Certified • Supervisory diode and four wires Model Voltage Operating Current FHEX 24VDC 1.20 amps Decibels @ 10' 1m 100 110 Electrical Products 708.534.4756 fax 708.534.4852 elp@fedsig.com www.federalsignal-indust.com F E D E R A L S I G N A L C O R P O R A T I O N AUDIBLE SIGNALING DEVICE (FHEX) 61/2" 61/2"/ 165.1 mm 165.1mm 75/8" 193.68 mm Die Cast Zinc Grille Cast Aluminum Corrosion- Resistant Housing 3 /4" NPT S P E C I F I C AT I O N S -31°F to 150°F 9.0 lbs. 10.3 lbs. 7.63" 6.5" 6.5" DISTRIBUTOR Operating Temperature: Net Weight: Shipping Weight: Height: Depth: Diameter: 3 /4" NPT HOW TO ORDER -35°C to 66°C 4.1 kg 4.7 kg 193.8 mm 165.1 mm 165 mm • Specify model number SPEAKERS INDEX Regardless of the environment, Federal Signal has the speaker to meet your specification. Our product line includes indoor, outdoor, weatherproof, hazardous area and explosion proof speakers. A choice of two-, fifteen- and thirty-watt models is available. Each speaker can be configured to operate in a 25 or 70VRMS system. Models are available with and without UL1971 strobes. All models are UL 1480 certified. AM50-R AM300GCX-R / AM302GCX-R AM300-R / AM302-R INDOOR AND OUTDOOR USE HAZARDOUS LOCATIONS INDOOR AND OUTDOOR USE • 25 and 70Vrms • UL Listed, CSFM UL 1480 certified • 25 and 70Vrms • 25 and 70Vrms • UL Listed, CSFM Approved • UL Listed, CSFM Approved2 • UL 1480 certified • Flush or surface mount • UL 1480 certified • Type 3R • Type 3R with WB-R weatherproof back box • 101dBA @ 10’ • Choice of two models AM300-R – 15 watts AM302-R – 30 watts • 2 watts • Multiple taps • Type 4X • Choice of two models AM300GCX-R – 15 watts AM302GCX-R – 30 watts • Multiple taps • Multiple taps • Class I, Div. 2, Groups A,B,C,D; Class II, Div. 2, Groups F,G; Class III SPEAKERS Input 25 or 70Vrms Frequency Response 400-4000Hz 25 or 70Vrms 400-4000Hz - - - 94 - 96 - 100 102 - 25 or 70Vrms 400-4000Hz - - - - - - - 1 99 102 1051 25 or 70Vrms 400-4000Hz - - - 94 - 96 - 100 102 - AM302GCX-R 25 or 70Vrms 400-4000Hz - - - - - - - 99 102 1051 AM300X-R 25 or 70Vrms 400-4000Hz - 87 90 - 93 - 99 - 99 - 25 or 70Vrms 400-4000Hz - - - - - - - - 99 1021 Model AM50-R AM300-R 1 AM302-R AM300GCX-R 1 1 AM302X-R UL dB(A) Sound Pressure at Wattage Taps 0.25 0.50 1.0 1.5 2.0 3.0 7.0 9.0 15 78 81 84 87 - 1 UL Fire Listing and CSFM Approval is pending on 30-watt models, call The Signal Source for current listing information. For these models, UL sound pressure ratings are estimated from Federal Signal test data. 1 30 1 1 1 Explosion Proof Sounders & Beacons Clifford & Snell Yodalex • • • • • • • ATEX IECEx GOST-R DIMENSIONS mm 276 (10.9”) 288 (11.3”) Mounting Bracket provided. 2 holes x M8 clearance 75 (3”) 145 (5.7”) 420 (16.5”) All dimensions quoted are approximate only and subject to change without notice as are technical features resulting from continual development and improvement. CONFIGURATOR Unit Type Strobe V6 Sounder YO6 Combined Sounder Strobe YL6 EU / RU / IN IIB IIB+H2 UL Gas Group C,D Gas group B 115Vac V6 & YL6 5 Joule 24Vdc 48Vdc V6 Only 10 Joule or 115Vac 230Vac or European USA/Canada Russian International Telephone Initiate V6 Y06 7 Lens colours in flame retardant polycarbonate, Clear (C), Opal (O), Yellow (Y), Red (R), Amber (A), Blue (B), Green (G). Telephone Initiate option available - contact Sales Office 32 selectable tones meeting international regulations Sound selection via DIL switches. Temperature class T4 Standard, Class T6 Optional TECHNICAL SPECIFICATION IP66 NEMA 4X Sounder/Strobe 24Vdc (YL6) (UL, ATEX, GOST, IECEx) 570mA Sounder 24Vdc (YO6) (UL, ATEX, GOST, ECEx) 350mA Strobe 24Vdc (V6) 5 J (UL, ATEX, GOST, ECEx) 220mA 24Vdc (V6) 10J ( ATEX, GOST, IECEx) 500mA 24Vdc (V6) 20J ( ATEX, GOST, IECEx) 1.1A 48Vdc (V6) 5J (UL, ATEX, GOST, ECEx) 135mA 48Vdc (V6) 10J ( ATEX, GOST, IECEx) 300mA 48Vdc (V6) 20J ( ATEX, GOST, IECEx) 560mA (UL, ATEX, GOST, IECEx) 110mA Sounder 115Vac (YO6) Strobe 115Vac (V6) 5 J (UL, ATEX, GOST, ECEx) 90mA 115Vac (V6) 10J ( ATEX, GOST, IECEx) 105mA 115Vac (V6) 20J ( ATEX, GOST, IECEx) 260mA Sounder/Strobe 115Vac (YL6) 5J (UL, ATEX, GOST, IECEx) 200mA Sounder 230Vac (YO6) (UL, ATEX, GOST, IECEx) 55mA Strobe 230Vac (V6) 5J (UL, ATEX, GOST, ECEx) 45mA 230Vac (V6) 10J ( ATEX, GOST, IECEx) 53mA 230Vac (V6) 20J ( ATEX, GOST, IECEx) 170mA YL6 IIB only Clifford & Snell a division of Signature Industries Ltd part of the Digital Angel Corporation or or OPTIONAL T6 (-35º to +40ºC) T6 (-20º to +40ºC) Underwriters Laboratories UL Standards UL 464, UL 1203, UL 1638 Control No.8N30 (Sounder YO6 and Combined Unit YL6) Control No.13JM (Strobe V6 only) UL Classifications Class I Division 1, Gas Group BCD Class II Division 1, Gas Group EFG (Strobe V6 only) CUL Canada CSA C22.2 No.25-M1966, CSA C22.2 No. 30-M1986 European Standards EN60079-0:2004 (EN50014:1997+Amendments 1 and 2) EN60079-1:2004 (EN50018:2000) EN50281-1-1:1998. ATEX Directive 94/9/EC Baseefa02ATEX0212X II2 GD Ex d IIB T4 (or T6 see above) Baseefa02ATEX0222X II2 GD Ex d IIB+H2T4 (or T6 see above) Russian Approval International Certification GOST-R IECEx 20 Joule Lens Colour Certification Dual cable entry, cable in - cable out: c/w ATEX certified plug and dustcover as standard on ATEX models; UL models supplied with 2 x 1/2 inch NPT adaptors. Aluminium enclosure with stainless steel fasteners. Lens guard provided as standard Flash rate 1 per second. Weather proof flame retardant ABS horn APPROVAL SPECIFICATION 230Vac Sounder/Strobe YL6 Strobe only V6 Omni Direc ional high output sounder 110dB max @ 1 meter 2 stage alarm, independently selectable 2nd stage All units share a common explosion proof housing Meets UL, CSA, GOST, ATEX and IECEx Approvals ATEX / IECEx Approved for Gas & Dust Zone 1 & 2, 21 & 22. STANDARD European IIB T4 (-35º to +60ºC European IIB+H2 T4 (-20º to +60ºC For T6 Class refer to Sales Office 48Vdc Supply Voltage • • • • • • • • • • • • • • • • • • MAIN FEATURES OPERATING TEMPERATURES 24Vdc Sounders only YO6 • • • • • • • • • Tom Cr bb Road, Thamesmead, London SE28 0BH Tel: +44 (0)20 8316 4477 INDEX or (0)20 8317 1717 Fax: +44 (0)20 8317 2400 Email: sales@cliffordandsnell.com Web Site: www.cliffordandsnell.com IIB+H2 Controlled document No. D7385-01-06 (CN100301)\\ My Documents\ SALES DATA\ data sheets\Yodalex 7+(502)/(; $8720$7,& 7+(50267$76 )25 ),5( $/$50 6<67(06 6SHF 6KHHW ([SORVLRQ 3URRI 'HWHFWRU $ FDVW DOXPLQXP KRXVLQJ HQFORVHV D VWDQGDUG 7+(502)/(; KHDW GHWHFWRU PDNLQJ LW VXLWDEOH IRU XVH LQ +D]DUGRXV /RFDWLRQV LQFOXGLQJ WKRVH UHTXLULQJ GHWHFWRUV WKDW DUH ([SORVLRQ SURRI :DWHU DQG GXVW 7LJKW 7KH VXIIL[ (:7 GHQRWHV D XQLW WKDW LV VXLWDEOH IRU DUHDV GHVFULEHG DV x x x x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¶P IRU WKH 5DWHRI5LVH ¶ P IRU )L[HG 7HPSHUDWXUH SRUWLRQ 'LVWDQFH IURP DQ\ ZDOO RU SDUWLWLRQ LV ¶ P DQG ¶ P UHVSHFWLYHO\ 1RWH 7KH GHVLJQDWLRQ ³&)´ LQ WKH PRGHO QXPEHU GHQRWHV ³)L[HG 7HPSHUDWXUH 2QO\´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ò´ ULJLG FRQGXLW 7KH XQLW LV IDVWHQHG WR WKH FHLOLQJ VXUIDFH E\ PHDQV RI WZR PRXQWLQJ KROHV WKDW DUH ´ PP LQ GLDPHWHU 3LJWDLO OHDGV DUH SURYLGHG IRU FRQQHFWLRQ WR WKH )LUH $ODUP LQLWLDWLQJ FLUFXLW DQGRU DQ\ DQFLOODU\ GHYLFH $IWHU FRQQHFWLRQV DUH PDGH WKH XQLW LV UHDVVHPEOHG XVLQJ WKH VL[ PDFKLQHWKUHDG EROWV SURYLGHG 7KH EODFN ZLUHV DUH VROGHU FRQQHFWHG LQWHUQDOO\ WR RQH VLGH RI WKH FRQWDFWV DQG WKH ZKLWH ZLUHV DUH FRQQHFWHG WR WKH RWKHU VLGH LQ WKH VDPH ZD\ &RQWDFW 5DWLQJ $ # 9$& $ # 9'& $ # 9'& $ # 9'& 'LPHQVLRQV 'LDPHWHU ´ FP +HLJKW ´ FP :HLJKW OE JP 1RODQ &RXUW 8QLW 0DUNKDP 21 /5 / 7HO )D[ (PDLO LQIR#ILUHGHWHFWLRQGHYLFHVFRP ZHE VLWH ZZZILUHGHWHFWLRQGHYLFHVFRP INDEX T H E S I G N A L S O U R C E RMS-EXP SERIES EXPLOSION PROOF MANUAL PULL STATION WEATHER PROOF — NEMA 4X The RMS series explosion proof, weather proof pull stations are constructed of the finest materials and workmanship available. Made of high strength metal die-cast alloy. The RMS series explosion proof, weather proof pull stations come standard with options similar devices offer separately. A UL rating of Class I group B (hydrogen) C&D, class II groups E,F,G, class III and an outdoor rating of type 4X, these stations offer unmatched placement flexibility. Terminal block connections, D.P.D.T. contacts rated at 10 amps 120/250VAC, meets most electrical requirements for either indoor or outdoor applications. Customizing your RMS-EXP pull station to meet your exact application requirements is one more example of the flexibility of the RMS-EXP series. Optionally offered is the key reset (many key codes available ), Lift & Pull Dual Action cover ( LP ), and break glass adapter with solid brass hammer and chain. ( Break glass adaptor cover design allows glass to fall out before activating for safety). The RMS-EXP series pull stations are also offered in special colors, Orange, Blue, Green, Yellow are a few examples. Add an LP cover with your custom message in any language, silk screened in your specified color. Engraving directly on the pull station is also offered, allowing the device to be customized for each of your applications unique requirements. The Signal Source P.O. Box 10330 Palm Desert, CA 92255-0330 Fax 888-436-4277 - 760-436-0763 Tel 866-548-2331 - 760-341-3609 Sales@TheSignalSource.com WWW.TheSignalSource.com INDEX HPFF12, HPFF12CM, HPFF12E, HPFF12CME NAC Expander/Power Supply The Honeywell HPFF12(E) and HPFF12CM(E) are Notification Appliance Circuit (NAC) Expander Power Supplies designed to extend the power capabilities of existing NACs and provide power for auxiliary devices. The HPFF12 and HPFF12CM connects to any 12 or 24V Fire Alarm Control Panel (FACP) or operates stand-alone. HPFF12 60547cov.jpg Description They provide regulated and filtered 24VDC power to four NAC's and an auxiliary output. The NAC outputs are rated at 3.0 amps each and the auxiliary output is rated at 2.0 amps (this output is continuously supplied, even in alarm, and therefore must be taken into account for power supply loading and battery size calculations). The combined output cannot exceed 12.0 amps. The HPFF12 and HPFF12CM provide independent output circuit supervision so in the event of a NAC fault they can notify the attached FACP. In addition they have a trouble memory feature that displays past troubles (by NAC) for rapid diagnostics. Synchronization is built in for five appliance brands. The HPFF12 and HPFF12CM have two fully independent supervised initiating circuits that can be used for synchronized strobes and coded horns. Their NAC outputs may be configured as any of the following: • four Class B (Style Y) • two Class A (Style Z) • two Class B and one Class A • four Class A with the optional HPP31076 Class A adapter These power supplies contain an internal Battery charger capable of charging up to 26.0 amp-hour (AH) batteries. HPFF12CM: Three modules in EQBB-D4 The HPFF12 is mounted in a lockable wall cabinet that can accommodate up to two 18AH batteries. The HPFF12CM is designed to mount in Honeywell’s large equipment enclosure (EQBB-D4; order separately). Up to three HPFF12CM supplies can be mounted in a D-sized EQ cabinet in positions 2, 3, and 4. Each HPFF12CM can accommodate two 12AH batteries. One of the most challenging aspects of a retrofit application is locating the existing End-of-Line (EOL) resistor. In these applications that have EOL values other than the 3.9k normally used with the HPFF12, a single resistor matching the existing EOL can be used as a reference for all the outputs. This feature speeds installation and system checkout because the actual EOL does not need to be located and changed in the circuit. The reference resistor must be within the range of 1.9k to 25k. • • NOTE: 4 separate programming resistors for the HPFF12 are provided in the hardware kit shipped with each HPFF12(E) and HPFF12CM(E). They are 3.9K (5 of these are provided, need only 1 for programming), 2.2K (1 each), 4.7K (1 each) and 10K (1 each) Features • Listed to UL Standard 864, 9th edition. • Four (4) power limited supervised notification application circuits (NAC's) capable of supplying +24VDC at 3.0 amp maximum each. • NAC output circuits may be configured as any of the following: – Four Class B (Style Y). • • • • • • – Two Class B & one Class A. – Two Class A (Style Z). – Four Class A (requires the HPP31076 Class A adapter). Four field-programmable operational modes: – Pass-through. – Temporal generator. – Sync generator. – Pass-through Filtered. Temporal coding and sync protocols compatible with the following notification appliance brands: – System Sensor. – Faraday. – Amseco. – Cooper-Wheelock. – Gentex. Protocol pass-through for synchronizing large systems. Two fully independent supervised input/output control circuits. Redundant activation operation for survivability. Supports FACP’s Selectable Silence ability. 2.0 amp auxiliary continuously supplied output. Eight status LEDs. AL642ULADA, AL842ULADA, AL1042ULADA NAC Power Extenders Rev. AL642/842/1042ULADA - A09F Overview • The AL642ULADA, AL842ULADA and AL1042ULADA are extremely cost effective voltage regulated remote NAC Power Extenders. They may be connected to any 12 or 24 volt Fire Alarm Control Panel (FACP). Primary applications include Notification Appliance Circuit (NAC) expansion (supports ADA requirements) and will provide auxiliary power to support system accessories. AL642ULADA • 24VDC or 12VDC rated @ 6.5 amp max. • Four (4) Class A or four (4) Class B outputs. AL842ULADA • 24VDC or 12VDC rated @ 8 amp max. • Four (4) Class A or four (4) Class B outputs. AL1042ULADA • 24VDC rated @ 10 amp max. • Four (4) Class A or four (4) Class B outputs. Specifications • Two (2) Class A or two (2) Class B FACP inputs. • Two (2) NC dry contact trigger inputs. • Four (4) Class A or four (4) Class B indicating circuits. • Two (2) Class B outputs may be paralleled for more power on an indicating circuit. • One (1) Aux. Power Output @ 1 amp supply current (w/battery back up). • One (1) Aux. Power Output @ 1 amp supply current (w/o battery back up). • Signal Circuit Trouble Memory - facilitates quickly locating intermittent system trouble and eliminates costly and unnecessary service calls. LEDs indicate a prior fault (short, open, ground) has occurred on one or more signaling circuit outputs. • 2-wire Horn/Strobe Sync mode allows audible notification appliances (Horns) to be silenced while visual notification appliances (Strobes) continue to operate. • Horn/Strobe sync protocols include: Gentex®, System Sensor®, Faraday, Amseco. • Temporal Code 3 Mode. • Steady Mode. • Input to Output Follower Mode (maintains synchronization of notification appliance circuits). • March Time. • Compatible with 24VDC or 12VDC fire panels. • Ground fault detection. • Input 115VAC. • AC fail supervision (form "C" contacts). • Low battery supervision (form "C" contacts). • Battery presence supervision (form “C” contacts). • Power supply, logic board, red enclosure, cam lock, transformer & battery leads. • Enclosure: - Combination knockouts re 1/2” and 3/4” - Accommodates up to two (2) 12VDC/12AH batteries. Agency Approvals UL Listed Control Units and Accessories for Fire Alarm Systems (UL 864), UL Listed Standard for Safety for Fire Protective Signaling Systems (UL 1481). California State Fire Marshal Approved. Factory Mutual Approved. NYC Department of Buildings Approved. INDEX THE SIGNAL SOURCE HAS YOU COVERED FOR ALL OF YOUR SPEAKERS SYNCHRONIZED STROBE LIGHTS AMPLIFIED SPEAKERS SPECIAL APPLICATION SIGNALING NEEDS ASHP ASUP • 24VDC; filtered & unfiltered • UL 1480 certified • UL Listed, ULC Approved, CSFM Approved • Type 3R • ASHP - 112dB(A) ASUP - 118dB(A) ASHH ASUH • 24VDC; filtered & unfiltered • UL 1480 certified • UL Listed, ULC Approved, CSFM Approved • Type 4X • Class I, Div. 2 - A, B, C, D Class II, Div. 2 - F, G; Class III • ASHH - 112dB(A) ASUH - 118dB(A) FB24ST-HI • 4 wire, 24VDC • 10,000 hour lamp • UL Listed, CSFM Approved, UL1971 Listed • Type 4X, IP66 25 and 70Vrms UL 1480 certified Type 3R AM300-R - 15 watts - 102dB(A) AM302-R - 30 watts - 105dB(A) Ordinary Locations • 24VDC; filtered & unfiltered • UL 1480 certified • UL Listed, ULC Approved, CSFM Approved • Type 3R • Class I, Div. 1 - B,C,D • ASHX - 112dB(A) ASUX - 118dB(A) 224XST-HI • 4 wire, 24VDC • 10,000 hour lamp • UL Listed, CSFM Approved, UL1971 Listed • Type 4X • Class I, Div. 2 - A, B, C, D Class II, Div. 2 - F, G; Class III AM300-R AM302-R • • • • ASHX ASUX FSEX-HI - 150cd • • • • New - 150cd per UL1971 4 wire, 24VDC 10,000 hour lamp UL Listed, CSFM Approved, UL1971 Listed • Type 4X, IP66 • Class I, Div. 1 - C, D Class II, Div. 1 - F, G; Class III AM300X-R AM302X-R AM300GCX-R AM302GCX-R • • • • 25 and 70Vrms UL 1480 certified Type 4x Class I, Div. 2 - A, B, C, D Class II, Div. 2 - F, G; Class III • AM300GCX-R - 15 watts - 102dB(A) AM302GCX-R - 30 watts - 105dB(A) Hazardous Locations • • • • • 25 and 70Vrms UL 1480 certified Type 3R Class I, Div. 1 - B, C, D AM300X-R - 15 watts - 99dB(A) AM302X-R - 30 watts - 102dB(A) Explosion Proof Locations PO Box 10330 • Palm Desert, CA 9225-0330 phone 866-548-2331• fax 888-436-4277 • international phone 760-341-3609 • international fax 760-346-0763 www.thesignalsource.com