Hardware/Accessories
Grounding Kits
See drawings shown below for
configurations. Note that
towers and guy configuration
shown are for general
examples only and may not
duplicate all possible
installations.
Not all towers listed are current
models.
Models 36 and 48 and D are
discontinued.
AGK requires one guy wire
ground clamp for each guy
wire. These clamps are not
included in kit, and must be
ordered separately
Description
Base grounding kit consisting of:
one 5/8" x 8' hot dip galvanized ground rod
one brass tower attachment lug with hardware
one brass rod clamp
ten feet of #4 solid copper wire
For 80, 90 and C towers
For J, 55G and 65G towers
For 25G, 26KD and 45G towers
For 1/2 inch anchor bolts
For 5/8 inch anchor bolts
For 3/4 inch anchor bolts
For 7/8 inch anchor bolts
For 1 inch anchor bolts
Part Number
Anchor wire grounding kit for 3 anchors consisting of:
three 5/8" x 8' hot dip galvanized ground rods
three brass rod clamps
45 feet of #6 stranded copper wire
Note: Requires nine guy wire ground clamps - not included
BGK1G
BGK2G
BGK3G
BGK4G
BGK5G
BGK6G
BGK7G
BGK8G
11
11
11
11
11
11
12
12
AGK1G
33
BGK
BGK
Tower Base
Tower Leg
Tower Leg
Ground Rod
Top of
Ground Rod
6" Min. below
ground
Ground Rod
Clamp
Ground Rod
Clamp
Ground Rod
25G, 45G, 55G 36, 48, 80, 90, C
and D towers with flat base
Self-Supporting towers and guyed
towers with anchor bolts
AGK requires one guy wire ground clamp for each guy wire. Clamps are
not included in kit, and must be ordered separately based on guy wire size.
Guy Wire Size
3/16 through 1/2
9/16 through 3/4
7/8 and 1
Ground Wire
Attachment Lug
Copper Wire
(No. 4 max.)
Top of
Ground Rod
6" Min. below
ground
Top of
Ground Rod
6" Min. below
ground
25G, 45G and 55G towers with
flat base
Ground lug
(if provided)
Copper Wire
(No. 4 max.)
Copper Wire
(No. 4 max.)
Ground Rod
Clamp
BGK
Anchor bolt mustbe staked
if Pal nut is omitted
Attach to leg if round
member ground clamp
is provided. Attach to
joint bolt if ground wire
attachment lug is
Ground Rod
Weight
Tower Base
Round Member
Ground Clamp
Ground Clamp
340028
340029
9842L
Copper Wire
(No. 4 max.)
Top of
Ground Rod
6" Min. below
ground
Copper Wire
(No. 4 max.)
Ground Rod
Clamp
Ground Rod
Top of Ground Rod
6" Min. below ground
Ground Rod
Clamp
Guy Wire Grounding
Ground Rod
AGK
343
65G and J Towers with
tapered base
BGK
HA-14