CAUTION: Static electricity can damage electronic components. Repair only at static–free station. Refer to SDB 5955 ITEM PART NO. NO. DESCRIPTION QTY 1 807721–01 Motor & Pinion φ2 807690–00 Gear Box Assembly 3 4 φ7 8 9 10 φ11 13 14 φ15 17 18 φ19 φ20 21 22 23 24 25 27 30 371188–00 371098–00 807481–00 807476–00 807477–00 812973–00 807483–00 798699–00 798486–00 152347–00 799024–00 799025–05 371079–08 807478–00 798723–12 805434–00 733886–00 807774–00 330013–04 330045–00 807706–00 Form No. 234072 V.S.R. Switch Assembly Heatsink Clutch Housing Support Plate Bearing Plate Ball Screw Spring Spring High/Low Slider Clamshell Set Adjusting Ring Keyless Chuck Special Screw Screw Adaptor Screw Screw Forward/Reverse Slider Engr: RWA 1 1 1 1 1 1 1 1 1 1 4 6 1 1 1 1 1 1 6 1 7 3 1 ITEM PART NO. NO. 35 43 44 50 52 53 54 371076–03 807482–00 372599–02 372210–00 807479–00 807496–00 859441–00 DESCRIPTION Identification Label Spindle Assembly Nameplate Connector Thrust Washer Spring Washer Thrust Bearin QTY 1 1 1 1 2 1 1 φ NOTES: 2 Available as complete assemblies only and should not be dismantled. 7,11,20 REFITTING THE NOSE RING – Align the FIGURE 1 on nose ring (Item 20) with notch on module housing (item 7). Secure with retaining Plate (item 11) and test rotation of nose ring. 11,15,19,20 To avoid nose ring (item 20) and clutch springs (item 15) from flying out of the unit, do not remove the retaining plate (item 11) until the module/gearbox assembly has been lifted out of the clamshell (item 19). (Jul96–TS–DP) PARTS NOT SHOWN: (Supplied with Unit) 381369–01 Kit Box 97046 Battery Pack (Acc.) 97014 Charger (Acc.) IMPORTANT! To assure product SAFETY and RELIABILITY, repairs, maintenance and adjustment should be performed by BLACK & DECKER Service Centers or other qualified service organizations, always using BLACK & DECKER replacement parts. 3/8” ADJUSTABLE CLUTCH DRILL DRIVER Cat. no. Type 2821 1 2821K–2 1 Volts 9.6 DC 9.6 DC RPM 0–350/1100 0–350/1100 Black & Decker (U.S.), Inc. Product Service Division Hampstead, Maryland 21074 Printed in U.S.A./Mexico Bulletin No. 11831