TYPE:
CATALOG #:
ARCHITECTURAL
NOTES:
US
Mini-Revelation Series
™
The Unseen Solution
Virtually Invisible Emergency Lighting
Features
Suggested Specification
•Each unit comes with two (2) MR16 halogen lamps or 2 MR16 style LED lamps
•The Self-Powered battery unit is contained in a heavy-duty galvanized
steel back box that can be concealed in the wall or ceiling and includes a
combined test switch and pilot light that is accessible through the frame
•The normally exposed parts of the unit (flat door and frame) are covered with
a high-quality powder-coated, textured off-white finish that integrates well
with most wall and ceiling paints. The surface finish can also be customized
on site with paint, wallpaper or other coverings
•Power requirements: 120/277VAC, 60Hz, 0.25/0.12A
•PulsePlus Charger - this automatic charger is built around a microcontroller integrated circuit. Circuit standard features include current limiting,
temperature-compensated cut-off voltage, brownout transfer, low-voltage
battery disconnect and battery lock out (prevents activation in DC mode until
initial AC activation)
•The equipment includes an electrical junction box and can be installed on a
wall stud or ceiling beam with a simple U-shape bracket.
•Evaluated to UL 924 Standard
•5-year warranty on electrical parts (motor, electronic circuitry). Each unit is
fully computer-tested and aligned mechanically for optimum operation
•AD or ADNA options include includes a Time Delay function. If needed, it can
be enabled/disabled in the field or it can be preset at the factory by including
the suffix AD-D_ or ADNA-D_
Supply and install Emergi-Lite®® Series Mini-Revelation: MRT___.
The unit shall be designed to be completely concealed in walls with a
cavity. The equipment shall consist of a metal housing containing two
modules joined by a flexible bracket and electric conduit. One module
contains the battery, charger circuitry and electrical connection box;
the other module contains the emergency lights installed on the back
of a door able to rotate several t urns of 360°. The unit equipment
shall be completely concealed in the wall, after the installation through
a rectangular opening not larger than 8.25-in by 5.75-in. In stand-by
mode, the only visible parts of the unit shall be the flat door and trim
plate, coated with a highquality off-white finish that can be customized
on site with paint or ot her suitable wall covering. Upon a power failure
the unit will expose the emergency heads by rotating its door 180° and
then will power the lamps. At the restoration of the AC power or at the
end of the battery discharge, the lamps will turn off and the unit will
retract the heads by rotating the door 180° in the same direction. The
unit shall not require the presence of AC power in order to close the
door and conceal the lights. The door of the unit shall be easy to forceturn (open or close) by hand, in any rotation direction. The light source
shall be 12V MR16 halogen lamps of specified wattage and light output.
The unit shall supply the rated load for a minimum of 90 minutes or until
the battery is discharged to 87½ % of its nominal voltage (whichever
duration is longer). The charger circuitry shall utilize a micro-controller
IC that samples the batter y in relation to the ambient temperature,
state of charge, and input voltage fluctuations. The charger shall be
current limited, temperature compensated, shortcircuit proof, and
reversepolarity protected. The circuit all be furnished with a recessed,
illuminated push button serving as test switch and status indicator light.
Diagnostic/Self Test Feature (optional)
DThe unit will come complete with the Emergi-lite® series of advanced
diagnostic micro-controller circuitry that will ensure the equipment
readiness and reliability by continuously monitoring every critical
function of the unit. If a component failure occurs, the pilot light located
on the front of the unit will change co lor from green to red and will flash
indicating a fault. A detailed diagnostic legend shall be available on
the back side of the door and shall provide fault identification (battery,
charger circuitry, lamps) for the maintenance personnel. The self-test
shall simulate a power loss for minimum 30 seconds every 30 days, 30
minutes every 6 months, and 90 minutes annually.
The
equipment
shall
be
EMERGI-LITE ® catalog
The unit shall be Emergi-Lite® model:
Battery Warranty*
Unit carries a 5-year full warranty.
number:
Battery Warranty*
.
Sealed Nickel Cadmium Battery has a 10 year life expectancy and
carries a 5-year Full Warranty, plus a 5-year pro rata warranty.
Dimensions
Dimensions are approximate and subject to change.
* Subject to proper installation and maintenance.
Mounting Bracket
17-5/8”
5-1/4”
7”
9-1/8”
7-3/4”
Complete Unit
.
Installed Unit
9
Unit Rating
DESCRIPTION
SUFFIX
Remote Test Switch (metal face plate)
RTS
Remote Text Switch (plastic face plate)
RTS-1
Watts to 87-1/2% of rated battery voltage*
Model
MRT-40
1-1/2 hrs
40
2 hrs
3 hrs
30
24
4 hrs
-
* National Electrical Code Specification
Power Consumption
Model
Maximum
AC Input
MRT40
MRTG
Stand-By (Ni-Cd, NiMH)*
Input Current
Input Power
Input Current
Input Power
120VAC
0.25A
30W
0.1A
11W
277VAC
0.12A
30W
0.05A
11W
120VAC
0.95A
110W**
–
–
277VAC
0.45A
110W**
–
–
* Stand-by power consumption is 50% lower for Lead-Calcium batteries
** Maximum power when equipped with 2 x 50W lamps (generator unit)
How to Order
SERIES
Battery
Unit= MRT
BATTERY TYPE
M= Lead-Calcium
N= Nickel-Cadmium
H= Nickel-Metal Hydride
UNIT CAPACITY
40= 12V-40W
AC INPUT
Blank= 120/277VAC
LAMP TYPE/WATTAGE
-2 (12)= 12W each head
-2 (20)= 20W each head
-2 (20H)= 20W, high lumen output
-2 (LG)= MR16 LED, 12V-4W
-2 (LI)= MR16 LED, 12V-5W
-2 (LJ)= MR16 LED, 12V-6W
OPTIONS
-AD= Advanced Diagnostics (audible)*
-ADNA= Advanced Diagnostics (non-audible)*
-D1= Time Delay (5 minutes)
-D2= Time Delay (10 minutes)
-D3= Time Delay (15 minutes)
-DL= Damp Location (only MRTN40, MRTH40)**
* AD & ADNA include a time delay feature that can be
enable/disable in the field or set by the factory
** Available on all models except Ni-Cd 100W
Generator
Unit= MRT
G= Remote AC generator
Blank= Max. 100W
1= 120VAC
2= 277VAC
-2 (12)= 12W each head
-2 (20)= 20W each head
-2 (35)= 35W each head
-2 (50)= 50W each head
-2 (20H)= 20W, high lumen output
-2 (35H)= 35W, high lumen output
-2 (50H)= 50W, high lumen output
-2 (LG)= 12V-4W, MR16 LED
-2 (LI)= 12V-5W, MR16 LED
-2 (LJ)= 12V-6W, MR16 LED
-DL= Damp Location
Example: MRTM40-2(20)-ADNA
All information and specifications contained in this specsheet are subject to change due to engineer design, errors and omissions.
Illustrations and diagrams within this specsheet may vary from actual products.
11
2016© Thomas & Betts Limited. All rights reserved.
ARCHITECTURAL
Accessories (order as a separate item)