Page 1 of 12
Caterpillar Electronic Technician 2012C v1.0
Product Status Report
1/14/2015 1:09 PM
Product Status Report
Parameter
Product ID
Equipment ID
Comments
Value
00000000
NOT PROGRAMMED
Caterpillar 950H
Implement 950H
Parameter
Product ID
Equipment ID
ECM Part Number
ECM Serial Number
Software Group Part Number
Software Group Release Date
Software Group Description
Active Diagnostic Codes Present
Value
J5J00257
ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ
2621408-01
06866052JT
2981356-00
AUG2006
MWL 950H IMPLEMENT
Yes
Logged Diagnostic Codes [Diagnostic Clock = 6043 hours] - Implement 950H
Code
Description
351- 3 Tilt Linkage Position Sensor : Voltage Above Normal
351- 4 Tilt Linkage Position Sensor : Voltage Below Normal
351-13 Tilt Linkage Position Sensor : Out of Calibration
Occ. First Last
4
3
2
6042 6042
6042 6042
5205 5244
Logged Event Codes [Diagnostic Clock = 6043 hours] - Implement 950H
Code
Description
E350 (1) Tilt Linkage Movement Detected w/ no Command Given
E352 (1) Tilt Linkage Movement Detected in Wrong Direction
file://C:\ProgramData\Caterpillar\Electronic Technician\temp\STPLReport1.HTM
Occ. First Last
50
4396 5243
1
5675 5675
1/14/2015
Page 2 of 12
Active Diagnostic Codes - Implement 950H
Code
Description
351-13
Tilt Linkage Position Sensor : Out of Calibration
Configuration - Implement 950H
Description
Implement Linkage Configuration
Implement Tool Configuration
Lift Linkage Sensor Configuration
Tilt Linkage Sensor Configuration
Joystick Installation Status
Tilt Function Enable Status
3rd Function Enable Status
Raise Kickout Enable Status
Lower Kickout Enable Status
Rackback Kickout Enable Status
Dump Kickout Enable Status
Lift Cylinder Snubbing Enable Status
Lift Linkage Float Enable Status
Lift Linkage Feather Catch Enable Status
Dump Rate Control Enable Status
Full Rack Angle Control Enable Status
Dump Stop Snubbing Enable Status
Implement Fine Modulation Control Enable Status
Autodig Installation Status
Security System Immobilizer Installation Status
Raise Solenoid #1 Start Current
Lower Solenoid #1 Start Current
Rackback Solenoid #1 Start Current
Dump Solenoid #1 Start Current
3rd Function Rearward Solenoid Start Current
3rd Function Forward Solenoid Start Current
Raise Solenoid #1 Maximum Current
Lower Solenoid #1 Maximum Current
Rackback Solenoid #1 Maximum Current
Value
Standard
Bucket
Rotary Position Sensor
Rotary Position Sensor
Not Installed
Enabled
Disabled
Disabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Disabled
Disabled
Disabled
Enabled
Not Installed
Disabled or Not Installed
0.724
0.682
0.709
0.696
Disabled or Not Installed
Disabled or Not Installed
1.240
1.240
1.198
file://C:\ProgramData\Caterpillar\Electronic Technician\temp\STPLReport1.HTM
Unit
Amps
Amps
Amps
Amps
Amps
Amps
Amps
Amps
Amps
1/14/2015
Page 3 of 12
Dump Solenoid #1 Maximum Current
3rd Function Rearward Solenoid Maximum Current
3rd Function Forward Solenoid Maximum Current
1.181
Disabled or Not Installed
Disabled or Not Installed
Amps
Amps
Amps
Cat Monitor System 950H
Parameter
Product ID
Equipment ID
ECM Part Number
ECM Serial Number
Software Group Part Number
Software Group Release Date
Software Group Description
Active Diagnostic Codes Present
Value
J5J00257
ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ
2524501-01
0746D515ED
2480015-00
NOV05
950G MWL CAT MON SYSTEM
No
Logged Diagnostic Codes [Diagnostic Clock = 6043 hours] - Cat Monitor System
950H
Code
Description
Occ.
First
Last
No Logged Diagnostic Codes
Active Diagnostic Codes - Cat Monitor System 950H
Code
Description
No Active Codes
Current Totals - Cat Monitor System 950H
Description
Total Operating Hours
Total Distance
Value
6043
19298.60
Unit
hours
km
Configuration - Cat Monitor System 950H
Description
Product ID
Value
J5J00257
file://C:\ProgramData\Caterpillar\Electronic Technician\temp\STPLReport1.HTM
Unit
1/14/2015
Page 4 of 12
Equipment ID
Information Units Status
ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ
Metric
Transmission 950H
Parameter
Product ID
Equipment ID
Transmission Serial Number
ECM Part Number
ECM Serial Number
Software Group Part Number
Software Group Release Date
Software Group Description
Active Diagnostic Codes Present
Value
J5J00257
ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ
BYY00205
2621408-01
06966123JT
2921990-00
MAR2006
MWL 950
No
Logged Diagnostic Codes [Diagnostic Clock = 6043.4259 hours] - Transmission
950H
Code
Description
Occ.
First
Last
No Logged Diagnostic Codes
Logged Event Codes [Diagnostic Clock = 6043.4259 hours] - Transmission 950H
Code
No Logged Events
Description
Occ.
First
Last
Active Diagnostic Codes - Transmission 950H
Code
Description
No Active Codes
Active Event Codes - Transmission 950H
Code
No Active Events
Description
file://C:\ProgramData\Caterpillar\Electronic Technician\temp\STPLReport1.HTM
1/14/2015
Page 5 of 12
Current Totals - Transmission 950H
Description
Total Forward Distance
Total First Forward Gear Operating Hours
Total First Reverse Gear Operating Hours
Total Second Forward Gear Operating Hours
Total Second Reverse Gear Operating Hours
Total Third Forward Gear Operating Hours
Total Third Reverse Gear Operating Hours
Total Fourth Forward Gear Operating Hours
Total Fourth Reverse Gear Operating Hours
Total Neutral Gear Operating Hours
Total Hours Coasting In Neutral
Cumulative Travel Time
Total Reverse Distance
Total Powertrain Oil Filter Bypass Hours
Transmission Lifetime Hours
Value
12280.50
614
272
1175
681
137
18
60
1
2514
158
3096.9
5670.60
3
5927
Unit
km
hours
hours
hours
hours
hours
hours
hours
hours
hours
hours
hours
km
hours
hours
Configuration - Transmission 950H
Description
Transmission Serial Number
Transmission Maximum Forward Gear
Transmission Maximum Reverse Gear
Ground Speed Limiter Installation Status
Forward to Reverse Desired Gear
Reverse to Forward Desired Gear
CTS Enabled
Tire Rolling Radius
Transmission Direction Switch #2 Type
Ride Control Configuration
Ride Control Forward Activation Speed
Ride Control Reverse Activation Speed
Ride Control Pressure Equalization Time
Secondary Steering
Command Control Steering Installation Status
Integrated Braking System Manual Mode Enable Status
Value
BYY00205
4
4
Not Installed
2
2
Enabled
Unavailable
Unavailable
Standard (1-valve)
9.7
9.7
3
Installed
Not Installed
Disabled
file://C:\ProgramData\Caterpillar\Electronic Technician\temp\STPLReport1.HTM
Unit
mm
km/h
km/h
sec
1/14/2015
Page 6 of 12
Left Front Brake Measurement
Right Front Brake Measurement
Right Rear Brake Measurement
Left Rear Brake Measurement
Brake Measurement Hour Meter Reading
Advanced Machine Security System Installation Status
Sunday Security System Bypass Start Time
Sunday Security System Bypass Stop Time
Monday Security System Bypass Start Time
Monday Security System Bypass Stop Time
Tuesday Security System Bypass Start Time
Tuesday Security System Bypass Stop Time
Wednesday Security System Bypass Start Time
Wednesday Security System Bypass Stop Time
Thursday Security System Bypass Start Time
Thursday Security System Bypass Stop Time
Friday Security System Bypass Start Time
Friday Security System Bypass Stop Time
Saturday Security System Bypass Start Time
Saturday Security System Bypass Stop Time
23.60
23.55
23.69
23.38
0
Not Installed
Disabled or Not
Disabled or Not
Disabled or Not
Disabled or Not
Disabled or Not
Disabled or Not
Disabled or Not
Disabled or Not
Disabled or Not
Disabled or Not
Disabled or Not
Disabled or Not
Disabled or Not
Disabled or Not
mm
mm
mm
mm
hours
Installed
Installed
Installed
Installed
Installed
Installed
Installed
Installed
Installed
Installed
Installed
Installed
Installed
Installed
Shift Count Matrix - Transmission 950H
To
From
N
R1
R2
R3
R4
1
2
3
4
N
R1
R2
R3
R4
1
2
3
4
--16485
36132
1132
49
56108
77775
4906
532
34020
--31571
122
8
60599
982
83
5
78911
10269
--2277
57
103335
186256
2028
141
1199
110
6896
--62
26
5
1379
0
52
7
7
206
--2
1
0
42
24926
69884
3039
41
3
--134247
2609
228
52300
30619
305568
4034
90
14001
--20520
1477
1708
33
71
1864
1
841
29156
--5153
142
2
1
1
49
17
73
7299
---
C7 950H (KHX02067)
Parameter
Value
file://C:\ProgramData\Caterpillar\Electronic Technician\temp\STPLReport1.HTM
1/14/2015
Page 7 of 12
Engine Serial Number
ECM Part Number
ECM Serial Number
Software Group Part Number
Software Group Release Date
Software Group Description
Active Diagnostic Codes Present
KHX02067
2622879-01
08266467JM
3073086-00
JAN07
C7-950H MLIT
No
Logged Diagnostic Codes [Diagnostic Clock = 6043.3871 hours] - C7 950H
(KHX02067)
Code
Description
Occ. First Last
100-10 Engine Oil Pressure Sensor : Abnormal Rate of Change
8
5879 6019
Logged Event Codes [Diagnostic Clock = 6043.3871 hours] - C7 950H (KHX02067)
Code
E360 (1)
Description
Low Engine Oil Pressure
Occ.
8
First
5879
Last
6019
Active Diagnostic Codes - C7 950H (KHX02067)
Code
Description
No Active Codes
Active Event Codes - C7 950H (KHX02067)
Code
No Active Events
Description
Current Totals - C7 950H (KHX02067)
Description
Total Idle Time
Total Fuel
Total Idle Fuel
Total Max Fuel
Total Operating Hours
Value
3514:06
67635
15724
263039
6043
file://C:\ProgramData\Caterpillar\Electronic Technician\temp\STPLReport1.HTM
Unit
hours
L
L
L
hours
1/14/2015
Page 8 of 12
Engine Starts
Lifetime Total Engine Revolutions
Total Engine Idle Shutdown Count
Total Engine Idle Shutdown Overrides Count
Average RPM
Percentage Idle Time
Average Fuel Rate
Overall Load Factor
8500
462476744
Unavailable
Unavailable
1275.52
58.15
11.19
25
rev
rpm
%
L/h
%
Configuration - C7 950H (KHX02067)
Description
Engine Serial Number
ECM Part Number
ECM Serial Number
Software Group Part Number
Software Group Release Date
Software Group Description
Engine Fan Control
Low System Battery Voltage Elevated Idle
Ether Solenoid Configuration
Engine Fan Reversing Feature
Engine Fan Purge Cycle Interval
Security System Immobilizer Installation Status
Engine Warmup Elevated Idle Feature Enable Status
Machine Working Engine Low Idle Speed Configuration
Machine Hibernating Engine Low Idle Speed Configuration
Engine Idle Shutdown Enable Status
Engine Idle Shutdown Delay Time
FLS
FTS
Total Tattletale
Value
Unit
KHX02067
2622879-01
08266467JM
3073086-00
JAN07
C7-950H MLIT
On
Enabled
Not Installed
Disabled
Unavailable
sec
Disabled or Not Installed
Enabled
1000.0
rpm
825.0
rpm
Unavailable
Unavailable
min
-34
28
2
Lifetime: Time vs Engine Coolant Temperature - C7 950H (KHX02067)
Engine Coolant Temperature( Deg C )
<50
50-54
hours
153.35
137.50
file://C:\ProgramData\Caterpillar\Electronic Technician\temp\STPLReport1.HTM
%
2.51
2.25
1/14/2015
Page 9 of 12
55-59
60-64
65-69
70-74
75-79
80-84
85-89
90-94
95-99
100-104
105-109
110-114
115-119
>120
243.95
389.45
525.95
633.35
757.85
2722.40
526.95
10.40
0.10
0.00
0.00
0.00
0.00
0.00
4.00
6.38
8.62
10.38
12.42
44.62
8.64
0.17
0.00
0.00
0.00
0.00
0.00
0.00
Lifetime: Time vs Inlet Air Temperature - C7 950H (KHX02067)
Inlet Air Temperature( Deg C )
<40
40-44
45-49
50-54
55-59
60-64
65-69
70-74
75-79
80-84
85-89
90-94
95-99
>100
hours
187.95
20.35
8.30
0.65
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
%
86.51
9.37
3.82
0.30
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
Lifetime: Time vs Boost Pressure - C7 950H (KHX02067)
Boost Pressure( kPa )
<80
80-89
hours
11.40
6.40
file://C:\ProgramData\Caterpillar\Electronic Technician\temp\STPLReport1.HTM
%
5.25
2.95
1/14/2015
Page 10 of 12
90-99
100-109
110-119
120-129
130-139
140-149
150-159
160-169
170-179
180-189
190-199
>200
7.35
9.05
16.60
91.80
73.60
0.95
0.00
0.00
0.00
0.00
0.00
0.00
3.38
4.17
7.64
42.27
33.89
0.44
0.00
0.00
0.00
0.00
0.00
0.00
Lifetime: Time vs Engine Speed And Engine Load Factor - C7 950H (KHX02067)
11001299
13001499
15001699
17001899
19002099
21002299
>2300 Total
44.11
9.51
9.68
7.38
3.65
1.85
0.58
0.01
76.77
0.32
0.49
0.83
1.11
1.24
0.53
0.21
0.01
4.74
0.13
0.30
0.59
0.85
1.15
0.66
0.27
0.02
3.97
0.07
0.12
0.26
0.54
0.88
0.81
0.40
0.03
3.11
0.02
0.05
0.11
0.32
0.79
1.62
1.00
0.07
3.98
0.02
44.67
0.03
10.50
0.09
11.56
0.70
10.89
2.33
10.03
2.92
8.39
1.29
3.74
0.06
0.21
7.43
100.00
rpm <1100
%
<50
5060
6070
7080
8090
>90
Total
Lifetime: Total Occurrences vs Engine Speed - C7 950H (KHX02067)
Engine Speed( rpm )
<2500
2500-2599
2600-2699
2700-2799
2800-2899
2900-2999
0.00
0.00
0.00
0.00
1.00
0.00
file://C:\ProgramData\Caterpillar\Electronic Technician\temp\STPLReport1.HTM
%
0.00
0.00
0.00
0.00
33.33
0.00
1/14/2015
Page 11 of 12
3000-3099
3100-3199
3200-3299
>3300
1.00
0.00
0.00
1.00
33.33
0.00
0.00
33.33
Injector Trim Calibration - C7 950H (KHX02067)
Injector
Injector1
Injector2
Injector3
Injector4
Injector5
Injector6
Serial Number
000000003B1100910926
000000003B11009089E5
000000003B110090711E
000000003B1100910821
000000003B1100910502
000000003B1100910019
File Version
0
0
0
0
0
0
Tattletale
0
0
0
0
0
0
Monitoring System - C7 950H (KHX02067)
Description
Engine Overspeed
Least Severe (1)
Moderate Severity (2)
High Air Filter Restriction Pressure
Least Severe (1)
Moderate Severity (2)
High Engine Coolant Temperature
Least Severe (1)
Moderate Severity (2)
High Engine Inlet Air Temperature
Least Severe (1)
Moderate Severity (2)
High Fuel Filter Pressure Restriction
Least Severe (1)
Moderate Severity (2)
High Fuel Pressure
Least Severe (1)
Low Engine Oil Pressure
Least Severe (1)
Moderate Severity (2)
State
Trip Point
Delay Time
Always On
Always On
2600 rpm
2800 rpm
0 sec
0 sec
Always On
Always On
7.5 kPa
9.0 kPa
10 sec
10 sec
Always On
Always On
108 Deg C
111 Deg C
10 sec
10 sec
Always On
Always On
75.0 Deg C
79.0 Deg C
8 sec
8 sec
Always On
Always On
None
None
3600 sec
14400 sec
Always On
758.0 kPa
8 sec
Always On
Always On
None
None
8 sec
4 sec
file://C:\ProgramData\Caterpillar\Electronic Technician\temp\STPLReport1.HTM
1/14/2015
Page 12 of 12
file://C:\ProgramData\Caterpillar\Electronic Technician\temp\STPLReport1.HTM
1/14/2015