CSS-ARCH5
QMT®5 Series Architectural Shade Hardware
>> Hardware series for mounting Crestron® roller shades
>> Adjustable brackets for shade leveling without any hardware
removal
>> Designed for use with Crestron CSM-QMTDC-250-4
Digital QMT® motors [1]
>> Optional brackets for manually operated shading solutions
>> Optional bracket for angled coupled shade installations
Single Roll Shades Versus Dual Roll Shades
Single roll shades are perfect for mounting shades in compact areas as
small as 5” by 5” (127 mm x 127 mm). Dual shades hardware supports
the installation of two roller shades with one set of brackets, allowing
light-filtering and blackout fabrics within the same system for
multipurpose rooms. Dual shades hardware requires an area 9” high
by 6” deep (229 mm high x 153 mm deep).
>> Fascia, top/back covers, and matching endcaps
>> Aluminum pockets available for recessed mounting
>> Single roll shade brackets that fit into pockets as small as 5” x 5”
(127 mm x 127 mm)
>> Blackout hardware for creating blackout scenarios in a room
>> Single roll or dual roll shade applications
NOTE: “CSS-ARCH5” is sold as part of a custom-configured product
and orders are placed via the Crestron® Design Tool for Crestron
Shading Solutions. This specification page is for informational
purposes and shows the available parts for QMT®5 Series
Architectural Shade Hardware. To configure shades or order shading
parts and accessories, please use the Crestron Design Tool for
Crestron Shading Solutions or call 1-855-53-S-H-A-D-E (537-4233)
for support.
QMT®5 Series Architectural Shade Hardware from Crestron® is a
mounting system that allows Crestron shades to be mounted on a wall or
ceiling or in a pocket or window jamb. The hardware offers solutions for
both single roll and dual roll shade applications. Motorized operation is
provided by the nearly silent Crestron CSM-QMTDC-250-4 Digital QMT
motor.[1] The motor integrates with a Crestron control system through
wireless communication, enabling the shades to be easily adjusted from
remote controls, keypads, and touch screens.
The QMT motor snaps into its bracket and has a Quick Release button
that makes installation and removal without any special tools quick and
easy. Brackets that are left/right and up/down adjustable ensure mounting
precision and shorten installation time by allowing the installer to make
changes without removing and reinstalling the entire bracket.
The QMT5 Series Architectural Hardware lineup also includes single
roll shade brackets for manual operation. Manually operated shades
are a cost-effective solution for any shading application. Whether for
installations in which motorized shades are unnecessary or not feasible
or as a stop-gap before upgrading to motorized shades, manual shades
offer the small profile and reliable, easy-to-install hardware of a Crestron
shading solution with minimum effort.
Angled Coupler
A specially designed coupler vastly increases the ease with which
tandem shade configurations are installed. Unique to the QMT5 Series
Architectural Hardware, the angled coupler simplifies even the most
complex of angular installation spaces. It has the ability to hold two
shades in tandem at any angle, making every bay window installation a
breeze.
Fascia
Decorative fascia conceals the front and bottom of the roller shade
from view in non-pocket mounting applications. Sporting a clean look, it
comes in square or curved options and features a variety of finishes to
complement any décor. An optional top/back cover provides coverage for
the top and back of the roller shade, perfect for when mounting shades
inside window jambs. Installation of each part is easy because the fascia
and top/back cover are tensioned fit and simply snap onto the mounting
brackets. Stylish end caps also snap into place onto the brackets and
match the color of the fascia.
Pocket
The pocket is a U-shaped extrusion that covers the front, top, and back
of the shade roller. It is not intended for a direct wall mount application. A
flap attaches to the inside of the pocket, covering as much of the shade
roller’s underside from view as possible while still letting the shade fabric
move up and down smoothly.
If the application is using a customer-provided pocket and it requires a
flap, a flap hanger is needed to hang the flap. The flap hanger is drilled
into the inside surface of the customer-provided pocket, thereby giving the
flap a place to mount.
Blackout Accessories
For an inside or outside mount installation, side channels enable blackout
conditions by helping to prevent light leaks between the window jamb and
shade fabric. Crestron offers two channel styles, the U-Channel and the
H-Channel,[2] which are available in same finish colors as the fascia.
The U-Channel is designed for a single window opening and is installed on
the left and right sides of the shade. The H-Channel[2] installs between two
adjacent shades, where it cuts down on light leaks between shades and
provides a smooth path for shade fabric to travel as it unrolls.
A sill angle helps to complete blackout treatments by reducing light leaks
along the bottom of the window. Channel Caps provide a finished edge for
smooth travel where the fabric enters the side channels.
Hembars
Crestron offers three hembar options: open pockets, sealed pockets, or
blackout.
• Open pockets are an appropriate choice when a designer does not
want to add an additional architectural element to a partially drawn
Page 1 of 9
crestron.com
| 800.237.2041
CSS-ARCH5 QMT®5 Series Architectural Shade Hardware
shade. In this style, the hem pocket has an opening at each end.
Hem bar end caps are supplied with an open pocket hem bar order,
providing a finished look to the ends of the shade fabric.
• Sealed pockets are most commonly found in commercial applications.
The sealed ends have a pinched look and are less desirable in
residential applications.
• Blackout hembars are used for blackout scenarios. They have a liner
across the bottom that helps to block light from entering a room when
the shade is down.
Notes:
1. Available in models CSM-QMTDC-250-4-CN and CSM-QMTDC-250-4-EX.
2. Because the H-Channel pertains to multiple window openings, it can only be ordered as an
accessory, not as part of a shade.
The specific patents that cover Crestron products are listed online at: patents.crestron.com.
Crestron, the Crestron logo, Cresnet, infiNET EX, QMT, and Quiet Motor Technology are either
trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and/or
other countries. Other trademarks, registered trademarks, and trade names may be used in this
document to refer to either the entities claiming the marks and names or their products. Crestron
disclaims proprietary interest in the marks and names of others. Crestron is not responsible for
errors in typography or photography. Specifications are subject to change without notice.
©2016 Crestron Electronics, Inc.
MOUNTING CONDITIONS
The shade mounting system allows Crestron shades to be mounted on a wall or ceiling or in a window jamb or pocket.
Inside Mount
Outside Mount
Pocket Mount
Page 2 of 9
crestron.com
| 800.237.2041
CSS-ARCH5 QMT®5 Series Architectural Shade Hardware
MOUNTING BRACKETS (MOTORIZED)
Available Finishes: White only
4.51
in
4.510
114.3 mm
1.75 in
44.5 mm
4.50
4.500in
114.6 mm
Single Mounting Bracket, Motor Side
(CSA-ARCH5-BRKT)*
Available Finishes: White only
4.51 in
4.510
114.3
mm
1.75 in
44.5 mm
4.50
in
4.500
114.6 mm
Single Mounting Bracket, Idler Side
(CSA-ARCH5-BRKT)*
* Mounting brackets are sold in pairs. The CSA-ARCH5-BRKT includes both the motor side bracket and the idler side bracket.
Page 3 of 9
crestron.com
| 800.237.2041
CSS-ARCH5 QMT®5 Series Architectural Shade Hardware
Available Finishes: White only
6.00 in
152.4 mm
1.75 in
44.5 mm
9.00 in
228.6 mm
Dual Mounting Bracket, Motor Side
(CSA-ARCH5-BRKT-DUAL)*
Available Finishes: White only
6.00 in
152.4 mm
1.75 in
44.5 mm
9.00 in
228.6 mm
Dual Mounting Bracket, Idler Side
(CSA-ARCH5-BRKT-DUAL)*
* Mounting brackets are sold in pairs. The CSA-ARCH5-BRKT-DUAL includes both the motor side bracket and the idler side bracket.
Page 4 of 9
crestron.com
| 800.237.2041
CSS-ARCH5 QMT®5 Series Architectural Shade Hardware
MOUNTING BRACKETS (MANUAL)
Available Finishes: White only
4.51
in
4.510
114.3 mm
1.75 in
44.5 mm
4.50 in
4.500
114.6
mm
Single Mounting Bracket, Clutch Side
(CSA-ARCH5-BRKT-MAN)*
Available Finishes: White only
4.51 in
4.510
114.3
mm
1.75 in
44.5 mm
4.50
in
4.500
114.6 mm
Single Mounting Bracket, Idler Side
(CSA-ARCH5-BRKT-MAN)*
* Mounting brackets are sold in pairs. The CSA-ARCH5-BRKT-MAN includes both the clutch side bracket and the idler side bracket.
Page 5 of 9
crestron.com
| 800.237.2041
CSS-ARCH5 QMT®5 Series Architectural Shade Hardware
ANGLED COUPLER
Available Finishes: White only
3.63
in
3.623
[ 92,03mm
92.0
4.44
4.440 in
[ 112,78
112.8 mm
4.017
4.02
in
102,03
[
102.0 mm
Single Roll Angled Coupler
(CSA-ARCH5-ANGLED-COUPLER)
FASCIA & END CAPS
Maximum Length: 16 ft (4.877 m)
Available Finishes: White, Black,
Gray, Brown, Almond
Single Square End Caps (Qty. 2)
(CSA-ARCH5-BRKT-CAP-SQR)
Available Finishes: White, Black, Gray, Brown, Almond
4.68 in
118.9 mm
4.68
[ 118,9
Single Curved End Caps (Qty. 2)
(CSA-ARCH5-BRKT-CAP-CRV)
3.10 in
78.7 mm
3.10
[ 78,7
Available Finishes: White, Black, Gray, Brown, Almond
]
Single Square Fascia
(CSA-ARCH5-FASCIA-SQR)
Dual Square End Caps (Qty. 2)
(CSA-ARCH5-BRKT-DUAL-CAP-SQR)
Maximum Length: 16 ft (4.877 m)
Available Finishes: White, Black, Gray, Brown, Almond
Available Finishes: White, Black,
Gray, Brown, Almond
4.68 in
118.9 mm
4.68
[ 118,9
3.10 in
78.7 mm
3.10
[ 78,7
Single Curved Fascia
(CSA-ARCH5-FASCIA-CRV)
]
Dual Curved End Caps (Qty. 2)
(CSA-ARCH5-BRKT-DUAL-CAP-CRV)
Available Finishes: White, Black, Gray, Brown, Almond
Page 6 of 9
crestron.com
| 800.237.2041
CSS-ARCH5 QMT®5 Series Architectural Shade Hardware
Maximum Length: 16 ft (4.877 m)
Maximum Length: 16 ft (4.877 m)
Available Finishes: White, Black,
Gray, Brown, Almond
Available Finishes: White, Black,
Gray, Brown, Almond
9.059.05in
[ 229,9
229.9 mm
9.059.05
in
[ 229,9
229.9 mm
3.29
3.29
in
[ 83,4 ]
83.4 mm
Dual Square Fascia
(CSA-ARCH5-FASCIA-DUAL-SQR)
3.29
3.29
in
[ 83,4 ]
83.4 mm
Dual Curved Fascia
(CSA-ARCH5-FASCIA-DUAL-CRV)
TOP/BACK COVERS
6.05 in
6.05
153.7
[ 153,7 mm
]
4.51 in
4.51
[ 114,6 mm
]
114.6
4.57
in
4.57
116.1[ 116,1
mm
Maximum Length: 16 ft (4.877 m)
Available Finishes: White, Black,
Gray, Brown, Almond
9.12
in
9.12
[ 231,5
231.5
mm
Maximum Length: 16 ft (4.877 m)
Single Top/Back Cover
(CSA-ARCH5-TBC)
Available Finishes: White, Black,
Gray, Brown, Almond
Dual Top/Back Cover
(CSA-ARCH5-TBC-DUAL)
Page 7 of 9
crestron.com
| 800.237.2041
CSS-ARCH5 QMT®5 Series Architectural Shade Hardware
POCKETS
Maximum Length: 16 ft (4.877 m)
Maximum Length: 16 ft (4.877 m)
Available Finishes: White, Black,
Gray, Brown, Almond
Available Finishes: White, Black,
Gray, Brown, Almond
3.28
in
3.28
[ 83,2
83.2 mm
5.19 in
131.7 mm
0.59 in
14.9 mm
Pocket Flap
(CSA-ARCH5-FLAP)
5.19
131,7
Maximum Length: 16 ft (4.877 m)
5.37 in
136.3 mm
5.37
[ 136,3
Available Finishes: White, Black,
Gray, Brown, Almond
1.20
1.20in
30.5
mm
[ 30,5
0.23 in
.23
5.7
5,7mm
Single Pocket
(CSA-ARCH5-POCKET)
Pocket Flap Hanger
(CSA-ARCH-FLAP-HANGER)
Maximum Length: 16 ft (4.877 m)
1.20 in
30.5 mm
Available Finishes: White, Black,
Gray, Brown, Almond
0.88 in
22.2 mm
Maximum Length: 16 ft (4.877 m)
Available Finishes: White, Black,
Gray, Brown, Almond
0.92 in
22.3 mm
Pocket Flap Hanger Tile Lip
(CSA-ARCH-FLAP-HANGER-TLIP)
5.19 in
131.7 mm
91.5
7,131
5.37 in
136.3 mm
73.5
3,631 [
0.69 in
17.6mm
Single Pocket w/Tile Lip
(CSA-ARCH5-POCKET-TLIP)
Page 8 of 9
crestron.com
| 800.237.2041
CSS-ARCH5 QMT®5 Series Architectural Shade Hardware
BLACKOUT ACCESSORIES
CSA-ARCH-BO-CHANNEL-U
[ 25,4
]
1.0
1.00 in
25.4 mm
5.0
in
5.00
[ 127 ]
127
mm
[ 63,5 ]
2.5 in
2.50
63.5 mm
1.0 in
1.00
[ 25,4
25.4
mm]
Available Finishes: White, Black,
Gray, Brown,
Almond
CSA-ARCH-BO-CHANNEL-H
Available Finishes: White, Black,
Gray, Brown, Almond
U-Channel
(CSA-ARCH-BO-CHANNEL-U)
H-Channel
(CSA-ARCH-BO-CHANNEL-H)
1.75 in
1.75
[ 44,5 mm
]
44.5
1.09 in
27.8 mm
Available Finishes: White, Black,
Gray, Brown, Almond
CSA-ARCH-BO-SILL
Sill Angle
(CSA-ARCH-BO-SILL)
Available Finishes: White, Black,
Gray, Brown, Almond
Channel Cap
(CSA-ARCH-BO-CHANNEL-CAP)
Page 9 of 9
|
Crestron Electronics, Inc. 15 Volvo Drive Rockleigh, NJ 07647
Tel: 800.237.2041 / 201.767.3400
www.crestron.com
| Fax: 201.767.1903
All brand names, product names and trademarks are the property of their respective owners.
©2016 Crestron Electronics, Inc.
Specifications subject to change without notice. Revised 03/15/16