NEXION Commercial
Lighting Controls
Project Name:
Prepared By:
Project Number:
Date:
Catalog Number:
Type:
Ceiling Mount Occupancy Sensor
with InstinctTM Technology
Dual Technology
10-30 V/DC
IN
Commercial Specification Grade Dual Tech Occupancy Sensor
FEATURES
• California Title 24 compliant.
• Self-adjusting Auto Off delay of 10 minutes
to 30 minutes.
• Dual technology Ultrasonic & Passive
Infrared (PIR) sensing eliminates false
activations or deactivations for additional
energy savings.
• Self-adapting sensors with Instinct
Technology drastically simplify and reduce a
contractor’s installation and adjustment time
period.
• Sensors will automatically reset time delay to
a 10-minute default when left at the installer
setting.
• Microprocessor-based airflow tolerant
technology features patented rate of change
technology, making these sensors ideal for
spaces with increased airflow due to higher
occupancy levels.
• Exclusive Energy-Saver mode for 2-level
lighting environments.
• BAS compatible.
• Manual ON/OFF feature when wired to a
normally open momentary pushbutton switch.
• Complete no-gap coverage; NEMA WD7
Guide robotic method utilized to verify
coverage patterns.
• Paintable off-white ABS molded housing.
INSTINCT
6.5"
(154mm)
3.75"
(100mm)
AHOMC-DT-0701-R
Wire Leads – Ceiling Mount
Frequency
Coverage Area
Description
Catalog No.
32 kHz
300-700 sq. ft.
(27.87-65.03 sq. m)
180º One Way Dual Tech
Occ. Sensor, Isolated Relay
■ AHOMC-DT-0701-R
Coverage Areas
AHOMC-DT-0701-R
300-700 sq. ft.
Max. mounting height: 12 ft.
TESTING & CODE COMPLIANCE
MATERIAL CHARACTERISTICS
• Listed to UL 508
• California Title 24 Energy Code compliant
• Environmental: Flammability meets UL94
requirements; V0 rated
• Temperature Rating: 15ºC to 26ºC (60ºF to 80ºF)
www.cooperwiringdevices.com
TM
1.46"
(37mm)
IN
Occupancy Sensor
Specification & Performance Data
Project Name:
Prepared By:
Project Number:
Date:
Catalog Number:
Type:
Ceiling Mount Occupancy Sensor
with InstinctTM Technology
Dual Technology
10-30 V/DC
Application
The Dual Tech sensor’s combination of Ultrasonic and Passive Infrared technologies with Instinct Technology offers the most
complete sensing equipment available today. This pairing helps eliminate false activations or deactivations for additional energy
savings. The OMC-DT sensors are also equipped with Instinct Technology which provides a revolutionary adaptive and airflow
tolerant technology, making them ideal for spaces which have increased airflow due to higher occupant levels. Dual Tech sensors
with Instinct Technology drastically simplify and reduce a contractor’s installation and adjustment time period. These self-adapting,
dual technology sensors truly offer some of the most advanced technology available. These sensors are ideal for offices, conference
rooms, storage areas, common areas, hallways and other indoor office spaces.
Device Type
Ceiling Mount Occupancy Sensor,
AHOMC-DT Series
Wiring Type
Pre-stripped wire leads
Specifications:
Environmental
Testing & Code
Compliance
ptional Switch for
Manual ON/OFF
apability. Use 3A
4VDC Momentary
Wall Switch.
• Listed to UL 508
• California Title 24 Energy Code
compliant
Warranty
5-year limited warranty
Flammability
Meets UL 94 requirements; V0 rated
Temperature Rating
m-Energy Saver Option/Dual Level Operation
Switchpack Wiring Diagram
Optional Switch for
Manual ON/OFF
Capability. Use 3A
24VDC Momentary
Wall Switch.
15ºC to 26ºC (60°F to 80°F)
Humidity Rating
Relative humidity less than 95%,
non-condensing
Operating Areas
For indoor ceiling use only
Specifications:
Materials
Specifications:
Operation
Specifications:
Mechanical
Specifications:
Electrical
Power Requirements 10-30 VDC from switchpack
Maximum Current
Per Sensor
25mA
Output
Open collector output to switch up to
10 switchpacks
Isolated Form C
Relay
Available in -R models; ratings: 1A,
30 VDC/VAC
Available
Frequencies
32 kHz
Detection
Technology
Passive Infrared and Ultrasonic
Mounting
NEMA double-gang box (use
#AHACMP), mounting post & washer,
placed at least 6 feet away from HVAC
registers
Energy-Saver Option / Dual Level Operation Wiring Diagram
Red indicates Passive Infrared
LED Indicating Lamp detection; green indicates Ultrasonic
detection
Time Delay
Self-adjusting from 10 min. to 30 min.
Coverage
Up to 700 sq ft. in 180° field of view
DIP Switch
Accessed by removable cover plate
Lens
Fresnel lens
Housing
Medium-impact injection molded ABS
resin housing, paintable
Specifications subject to
change without notice.
Classroom-Energy Saver Option/Dual Level Operation
Optional Switch for
Manual ON/OFF
Capability. Use 3A
24VDC Momentary
Wall Switch.
www.cooperwiringdevices.com
2-COSSPSH1-1210