COOPER LIGHTING - SURE-LITES
DESCRIPTION
Catalog #
Versatile “mini-system” features electronic reliability, quality metal
construction, surprising economy, optimum illumination and attractive
compact appearance.
Type
Project
The popular choice for commercial, institutional and public facilities where
moderate loads, economy, ease of installation, safety and reliability are
important. Maximum emergency lighting efficiency is combined with low
profile appearance.
Comments
Prepared by
Date
A P P L I C AT I O N
The unit of choice for installations where the size and cost of emergency
lighting must be kept to a minimum without sacrificing dependability or light output.
S P E C I F I C AT I O N F E AT U R E S
Electronic
Knockout, Conduit or Cord Set
Code Compliance
Dual Voltage Input 120/277 VAC, 60
Hz
Universal J-Box
Mounting Pattern
UL 924 Listed
Line-latching
Keyhole Mounting Slots
NEC/OSHA
Solid-state Voltage
Limited Charger
White Finish
Most State and Local Codes
Solid-state Switching
Battery
Warranty
Low Voltage Disconnect
Sealed Lead Calcium,
Recombination (LM1, AA1)
Unit – 1 year
Brownout Circuit
Life Safety NFPA 101
Head/Lamp Data
Maintenance Free, Long Life
Test Switch/Power
Indicator Light
Two Heads Standard
Full Recharge Time,
24 hrs. (max.)
Glare-Free Lens
Fully Adjustable
Polarized Battery Terminals
Housing Construction
AA SERIES
Battery – 5 year pro-rata
Sealed Nickel Cadmium Battery
(AA8)
Overload/Short Circuit
Protection
DOUBLE HEAD
High Impact – Thermoplastic
22 Gauge Die-Formed Steel
Matches Housing Finish
M E TA L B O D Y
EMERGENCY LIGHT
Emergency Lighting
9 1/8"
[232mm]
4 1/2"
[114mm]
2 1/4"
[57mm]
4 1/4" [108mm]
2 1/4"
[57mm]
5" max.
[127mm]
4" [102mm]
6 1/8" [156mm]
12 1/4" [311mm]
E L E C T R I C A L R AT I N G S
R a t e d W a t t a g e to 87 1/2% of Rated D.C. Voltage
Model
AA1
Battery
DC Voltage
SLC3 6
1 1/2 Hours
18
2 Hours
15
Lamp Information
3 Hours
10
4 Hours
8
Type
Wattage
Number
Incandescent
9
29-84
E N E R G Y D AT A
O R D E R I N G I N F O R M AT I O N
Input Current (Max.):
120V= .12A
277V= .05A
SAMPLE NUMBER: AA1V
AA1
Model
AA1
O p t i o n s (add as suffix)
A=Ammeter 2
SD=Self-Diagnostics
TDM=Time Delay Monitor
V=Voltmeter 2
Alternate Lamps 1
Other Finishes 1
Other Options 1
COOPER LIGHTING
A c c e s s o r i e s (order separately)
1BRWH =Mounting Brackets
NOTES:
(2) White
(1) Consult your Cooper Lighting
1MSWH=Mounting Shelf, White
VK1=Voltmeter
Representative.
WG1 =Wire Guard
(2) Provision for one meter only.
CSK120=Cord Set (120VAC)
(3) SLC=Sealed Lead Calcium
CSK277=Cord Set (277VAC)
VS1=Polycarbonate Vandal Shield
VS1WP=Polycarbonate Vandal Shield - Weatherproof
ADX040995
®
A A SERIES
PHOTOMETRICS
Horizontal Distribution
Ve r t i c a l D i s t r i b u t i o n
10
FEET
LEFT
10
FEET
LEFT
1FC
0
0.5
0.3
0.2
0.1
LAMP
AXIS
1FC
0
FEET
RIGHT
10
0.5
0.3
0.2
0.1
LAMP
AXIS
FEET
RIGHT
10
0
10
20
30
40
50
60
70
0
FEET FROM LAMP (Measured on axis)
Lamp No. 29-84
Initial Lumens – 29-84 @ 132
10
20
30
40
50
60
70
FEET FROM LAMP (Measured on axis)
Lamp No. 29-84
T E C H N I C A L D AT A
Heads
Line-Latched
The lamp housing is constructed
of flame-resistant and impactresistant polycarbonate injection
molded thermoplastic with
matching finish. The three
dimensional swivel assembly
permits approximate aiming
adjustment from 80° vertical and
358° rotation. The placement
is secured with a lockable pivot
mounted on a rotating base ring.
Sure-Lites’ line-latched
electronic circuitry makes
installation easy and
economical. A labor efficient
AC-activated load switch
prevents the lamps from
turning on during installation
to a non-energized AC circuit.
Line-latching eliminates the
need for a contractor’s return
to a job site to connect the
batteries when the building’s
main power is permanently
turned on.
Lamps
Designed specifically for
emergency lighting applications,
the PAR 36 sealed beam type
design insures optimum glarefree trapezoidal light distribution
along with horizontal and
vertical adjustment by rotating
the lens within the housing.
Housing
The rugged 22 gauge dieformed steel housing is finished
with white corrosion-resistant
polyester powder coat paint.
Cabinet has keyhole mounting
slots and knockouts in rear
and side for AC/DC wiring
connections and has universal
mounting pattern.
Overload and Short
Circuit Protection
The solid-state overload
monitoring device in the DC
circuit disconnects the lamp
load from the battery should
excessive wattage demands be
made and automatically resets
when the overload or short
circuit is removed. This
overload current protective
feature eliminates the need
for fuses or circuit breakers
for the DC load.
Brownout Circuit
Solid-State Charger
Supplied with a 120/277 VAC,
voltage regulated solid-state
charger. Immediately upon
restoration of AC current after
a power failure, the charger
provides a high charge rate.
The charge circuit reacts to the
condition of the battery and
alters the rate of charge in
order to maintain peak battery
capacity and maximize battery
life. Solid-state construction
recharges the battery following
a power failure in accordance
with UL 924.
The brownout circuit in SureLites’ units monitors the flow
of AC current to the unit and
activates the emergency
lighting system when a
predetermined reduction
of AC power occurs. This
dip in voltage will cause most
ballasted fixtures to extinguish
causing loss of normal lighting
even though a total power
failure has not occurred.
S o l i d - S t a t e Tr a n s f e r
The unit incorporates a solidstate switching transistor which
eliminates corroded and pitted
contacts or mechanical failures
associated with relays. The
switching circuit is designed
to detect a loss of AC voltage
and automatically energizes
the lamps. Upon restoration of
the AC power, the emergency
lamps will switch off and the
charger will automatically
recharge the battery.
L o w Vo l t a g e D i s c o n n e c t
When the battery’s terminal
voltage falls below 80% of the
rated voltage, the low voltage
circuitry disconnects the
lighting load. The disconnect
remains in effect until normal
utility power is restored,
preventing deep battery
discharge.
Te s t S w i t c h / P o w e r I n d i c a t o r
Light
Conveniently located
combination Test Switch/Power
Indicator Light allows for
manual verification of proper
operation of the transfer circuit
and emergency lamps.
Sealed Lead Calcium Battery
The fully sealed, long life,
maintenance free lead calcium
battery is ideal for emergency
lighting applications. These
recombinant cycle batteries
typically provide eight to ten
years of life and may be
operated in any position.
Warranty
All Sure-Lites’ units are backed
by a firm one year warranty
against defect in material
and workmanship (excluding
lamps). Maintenance free,
long life, sealed lead calcium
batteries carry a five-year
pro-rata warranty.
N O T E S : See option/accessories or technical sections for additional detailed product data. Specifications and Dimensions subject to change without notice.
Customer First Center 1121 Highway 74 South, Peachtree City, GA 30269 770.486.4800 Fax 770.486.4801 ADX040995