SRUB Self-Contained Air Cooled SRUB Model 7.5-20 Tons 50 Hz Self-Contained Air Cooled, 50 Hz No Water Required Quality and Reliability You will find the efficiency, flexibility, and unobtrusive styling of the SRUB models. The SRUBs are hard to be beaten especially for the scarely water in the local area, and high-rise office buildings. The SRUB get along fine without cooling by water. And this is another kind of Trane products which can serve the requirement in nearly every application. • Scroll compressors are available from 7.5 to 20 tons with excellent reliability and high efficiency. • Dual compressors and independent circuits are standard in the SRUB160-SRUB250 models. • All units are 100 percent run tested prior to leaving the production line. Designed For You • Light and compact. • Available in 7.5, 9, 10.5, 13.5, 16, 18 and 20 ton capacity. • The cabinet is thermally and acoustically insulated to make it even quieter. Maximum Efficiency • Lower noise operation and higher efficiency with the new generation higher EER Scroll Compressor. • 64% fewer parts than a comparable capacity reciprocating compressor. • Single rotating assembly minimizes the friction and mechanical losses. • Smooth operation, similar to a centrifugal compressor, give low torque variation and extend motor life, and minimal vibration reducing wear. • Solid mount with no internal suspension to be worn out. • Integral inlet dirt separator removes contaminants. • Rolling element bearings for higher efficiency reduced friction. No suction or discharge valves for improved efficiency compared to a reciprocating compressor. System Advantage • Factory assembly reduces installation costs - no field assembly is needed. • No need for external heat ex-changers, water towers and other space requirement. • Simply choose the location, install properly ducting, arrange drain piping and make electrical connection. • Horizontal and vertical discharge arrangement. • Quick-access panels for fast and easy servicing. • Fully refrigerant charge R22. System Performance Matrix Model Evaporator CFM Condenser CFM Total Capacity (MBH) Sensible Capacity (MBH) SRUB 080 SRUB 110 SRUB 130 SRUB 160 SRUB 190 SRUB 220 SRUB 250 2,800 3,600 4,400 5,200 6,200 7,200 8,300 4,500 5,500 5,500 8,000 9,000 10,000 11,000 87 110 127 165 194 213 251 61 73 92 113 141 159 184 Note: 1. Matched system ratings are per ARI condition. Full load ratings are at 95oF entering condenser air temperature, and 80/67oF air dry bulb/wet bulb entering the air handler coil. 2. Evaporator fan power accounts for ARI condition required external static pressure, and losses associated with air filters, casing and wet evaporator coil pressure drop. UNT-SLB005-EN Product Specifications UNIT MODELS POWER CONNECTION MCA1 SYSTEM DATA Refrigerant Type No. Refrigerant Circuits EVAPORATOR COIL Face Area Tube Size OD Rows Fins per inch Refrigerant Flow Control Drain Connection Size Drain Connection Type EVAPORATOR FAN Fan Type No. used Diameter Width Drive Type Nominal Airflow2 EVAPORATOR MOTOR Motor Type No. of Motor Motor hp V/ph/Hz RLA/LRA COMPRESSOR Compressor Type No. Used RLA/LRA CONDENSER COIL Face Area Tube Size OD Rows Fins per inch CONDENSER FAN Fan Type No. used Diameter Width Drive Type Nominal Airflow2 CONDENSER MOTOR Motor Type No. of Motor Motor hp No. of Speed Motor Speed V/ph/Hz RLA/LRA FILTER Type No. used Size (WxLxD) DIMENSION (HxWxD) Crated (Shipping) Uncrated (Net) WEIGHT Uncrated (Net) SRUB080AD 380-415/3/50 26.15 SRUB110AD 380-415/3/50 32.74 SRUB130AD 380-415/3/50 36.37 SRUB160BD 380-415/3/50 33.61 SRUB190BD 380-415/3/50 57.61 SRUB220BD 380-415/3/50 61.11 SRUB250BD 380-415/3/50 75.28 R22 1 R22 1 R22 1 R22 2 R22 2 R22 2 R22 2 7.22 (0.67) 3/8 (9.5) 3 12 Expansion valve 1 (25.4) Steel - MPT 10.83 (1.0) 3/8 (9.5) 3 12 Expansion valve 1 (25.4) Steel - MPT 10.83 (1.0) 3/8 (9.5) 3 12 Expansion valve 1 (25.4) Steel - MPT 12.92 (1.20) 3/8 (9.5) 3 12 Expansion valve 1 (25.4) Steel - MPT 12.92 (1.20) 3/8 (9.5) 4 12 Expansion valve 1 (25.4) Steel - MPT 15 (1.39) 3/8 (9.5) 4 12 Expansion valve 1 (25.4) Steel - MPT 15 (1.39) 3/8 (9.5) 4 14 Expansion valve 1 (25.4) Steel - MPT in (mm) in (mm) 1 12 (304.8) 15 (381.0) 1 12 (304.8) 15 (381.0) cfm (cmh) 2800 (4757) V/ph/Hz A sq ft (m2) in (mm) in (mm) 2 15 (381.0) 12 (304.8) 2 15 (381.0) 12 (304.8) 3600 (6116) Double Inlet Centrifugal with Forward Curved Wheel 1 1 1 12 (304.8) 15 (381.0) 15 (381.0) 15 (381.0) 15 (381.0) 15 (381.0) Belt - adjustable drive 4400 (7476) 5200 (8835) 6200 (10534) 7200 (12233) 8300 (14102) 1 1 (0.75) 380-415/3/50 1.99 - 11.0 1 2 (1.5) 380-415/3/50 3.66 - 21.0 Totally Enclosed-Fan Cooled, Three Phase Induction Motor 1 1 1 2 (1.5) 3 (2.2) 3 (2.2) 380-415/3/50 380-415/3/50 380-415/3/50 3.66 - 21.0 5.08-34.0 5.08-34.0 1 3 (2.2) 380-415/3/50 5.08-34.0 1 5 (3.7) 380-415/3/50 8.03 - 63.0 1 16.4 - 95.0 1 19.2 - 125.0 1 22.1 - 125.0 2 19.2 - 125.0 2 22.1 - 125.0 9.06 (0.84) 3/8 (9.5) 4 12 12.5 (1.16) 3/8 (9.5) 4 12 12.5 (1.16) 3/8 (9.5) 5 12 20.14 (1.87) 3/8 (9.5) 5 12 20.14 (1.87) 3/8 (9.5) 5 14 in (mm) in (mm) 1 15 (381.0) 15 (381.0) 2 12 (304.8) 15 (381.0) cfm (cmh) 4500 (7646) 1 2 (1.5) 1 1405 380-415/3/50 3.66 - 21.0 hp (kW) sq ft (m2) in (mm) hp (kW) rpm in Hermetic Scroll 2 1-1 16.4 - 95.0 16.4 - 95.0/19.2 - 125.0 17.22 (1.6) 3/8 (9.5) 4 12 17.22 (1.6) 3/8 (9.5) 5 12 2 15 (381.0) 15 (381.0) 2 15 (381.0) 15 (381.0) 5500 (9345) Double Inlet Centrifugal with Forward Curved Wheel 2 2 2 12 (304.8) 15 (381.0) 15 (381.0) 15 (381.0) 15 (381.0) 15 (381.0) Belt - adjustable drive 5500 (9345) 8000 (13592) 9000 (15291) 10000 (16990) 11000 (18689) 1 3 (2.2) 1 1425 380-415/3/50 5.08 - 34.0 Totally Enclosed-Fan Cooled, Three Phase Induction Motor 1 1 1 3 (2.2) 5 (3.7) 5 (3.7) 1 1 1 1425 1440 1440 380-415/3/50 380-415/3/50 380-415/3/50 5.08 - 34.0 8.03 - 63.0 8.03 - 63.0 1 5 (3.7) 1 1440 380-415/3/50 8.03 - 63.0 1 7.5 (5.5) 1 1445 380-415/3/50 12.0 - 79.0 Washable Aluminum Air Filter 2 1+2 1+2 3 3 25-3/4 x 21-1/4 x 1 25-3/4 x 20-1/4 x 1 25-3/4 x 20-1/4 x 1 30-3/4 x 21-3/4 x 1 30-3/4 x 21-3/4 x 1 25-3/4 x 21-1/4 x 1 25-3/4 x 21-1/4 x 1 3 3 30-3/4 x 25-1/4 x 1 30-3/4 x 25-1/4 x 1 mm mm 2083x1320x965 1955x1295x965 2083x1740x850 1955x1700x845 2083x1740x850 1955x1700x845 2502x1790x965 2375x1765x965 2502x1790x965 2375x1765x965 2502x2057x965 2375x2030x965 2502x2057x965 2375x2030x965 lb (kg) 1150.8 (522) 1406.5 (638) 1494.7 (678) 1794.6 (814) 2134.1 (968) 2341.3 (1062) 2358.9 (1070) 1 MCA - Minimum Circuit Ampacity 2 CFM is rated with standard air-dry coil Unit Arrangement (1) UNT-SLB005-EN (2) (3) (4) 3 Feature Summary G A 2 5 16 11 4 I J D 11 2 E K E 1 2 Evaporator Section B 9 16 13 16 H START BOTTON ø 34 F.P.T. ø 1 14 KNOCKOUT C PILOT RED LAMP CONDENSATE DRAIN CONN. (THIS END) FOR UNIT POWER (BOTH ENDS) 41 8 STOP BOTTON F ø 34 KNOCKOUT FOR CONTROL WIRING (BOTH ENDS) 10 5 16 7 13 16 Condensing Section 1213 16 5 1 2 1 G Evaporator Section For SRUB 080, 110, 130, 160, 190, with 1 Evaporator Blower. Except SRUB 220, 250 with 2 Evaporator Blowers. Condensing Section For SRUB 110, 130, 190, 220, 250 with 2 Condenser Blowers. Except SRUB 080 with 1 Condenser Blower. MODEL SRUB 080 SRUB 110/130 SRUB 160/190 SRUB 220/250 A 1 50 /2 67 69 79 1/2 B 1 29 /2 29 1/2 34 3/4 34 3/4 C 54 47 58 58 D 1 16 /16 24 1/16 25 1/16 17 1/16 E 7 F 18 /8 18 7/8 18 7/8 16 1 29 /8 29 1/8 39 1/16 39 1/16 G 7 36 /16 31 3/4 36 3/4 36 1/4 H 9 9 10 10 I J 7 13 /8 13 7/8 16 1/4 16 1/4 1 7 /2 7 1/2 9 7/8 8 7/8 K - 13 3/8 Note: All dimensional data are in inch. Product Specifications Evaporator Section Condensing Section • • • • • • • Single compressor for SRUB 080-130. • Dual compressors for SRUB 160-250 with 2- step capacity control. • Filter driers, sight glasses and service valves. • Factory leak tested at 400 psig air pressure. • Copper tube, aluminum plate fin coil with integral subcooled circuit. • Suction gas cooled, temperature and current-sensitive motor overload for compressor motor. • Double inlet, double width, forward curve, centrifugal type fan(s) with adjustable belt drive. • Build in current and thermal overload protection or condenser fan motors. • External high and low pressure cut-out devices. • Completely factory wired with 220 volt control circuit. • Plus or minus 10 percents of name plate voltage for utilization range. Convertible horizontal or vertical air discharge. Evaporator coil with leak tested. Single refrigeration circuit for SRUB 080-130. Dual refrigeration circuits for SRUB 160-250. Thermal expansion valve(s), factory installed. Double inlet, double width, forward curve, centrifugal type evaporator fan(s) with adjustable belt drive. • Thermal overload protection for evaporator fan motor. • Completely insulated with fire-retardant, fire retardant polyethylene foam. • 1” aluminum cleanable filter. Literature Order Number: Trane Thailand 1126/2, 30th- 31st Floor, Vanit Building II, New Petchburi Road, Makkasan, Ratchathewi, Bangkok 10400 Amair Limited 999/1 Mu 9, Bangna-Trad Km.19 Road, Bangchalong, Bangplee, Samutprakarn Bangkok 10540 http://www.tranethailand.com UNT-SLB005-EN Date: Dec 2008 Supersedes: Jun 2008 Stocking Location: Bangkok, Thailand Trane has a policy of continuous product and product data improvement and reserves the right to change design and specifications without notice.