PROJECT INFORMATION
PROJECT:
TYPE TYPE:
PROJECT
CATALOG#:
CATALOG#
8" Architectural Housing (Non-IC) w/ Self-Flanged Reflector
LVH8 SERIES - 8" ARCHITECTURAL CFL RECESSED LIGHTING
10 1/2"
7 1/2"
9"
14 3/4"
13 1/2"
SPECIFICATION
FEATURE:
Ceiling cut-out: 8 1/8"
Application:
Application:Architectural-grade recessed downlight housing for medium to high ceilings for
commercial installations. A variety of trims, compatible styles and finishes are available to
achieve the proper décor and illumination.
Housing Frame: 16 gauge galvanized plaster ring with powder coat finish, six friction clips
secure trim to housing for ceilings up to 2 1/4" thick. Triple slot bat-wing hanger brackets
accommodate multiple bar hanger systems.
Mounting: Housing suitable for new construction installations only, Bat-Wing bar hanger
brackets adjust vertically 3 1/4" for multiple ceiling types and accepts 1/2" EMT. 26" CChannel Strut for T-bar ceilings and 27" adjustable linear hanger bars for plaster ceilings or
wood/metal joists. Heavy duty 16-gauge, die-formed galvanized steel. Bar hangers
optional.
Ballast: Electronic Class P 60Hz Ballast with Inherent thermal protection. For Double Twin
Tube (DTT) or Triple Twin Tube Lamps (TTT). Sound A rated. Micro-Processor controlled.
Min. starting temperature -10ºC. Accessible from above or below the ceiling. Contact
factory for detailed technical information on ballast specifications. Note: For dimming
applications must use compatible dimmer switch. Consult specific ballast manufacturer for
up-to-date compatibility list.
Socket Cap: Extruded aluminum socket cap, 1 1/4" vertically adjustable socket arm with set
screw which enables the use of multiple lamp types and repositioning to optimize lamp
performance. Furnished with heat sink fins to vent lamp heat and extend lamp life. Accepts
compatible reflector trims.
Application: Architectural-grade recessed downlight reflector in
high ceilings for commercial and architectural installations.
Reflector designed for minimal glare from lamp without
sacrificing lumen output.
Construction:
Construction:One piece self-flanged design enables a clean trim
finish, without the need for a secondary trim ring. Heavy-gauge
aluminum reflector prevents ugly dents during shipping and
installation. Iridescent-free reflective coating minimizes unsightly
rainbow effect.
Mounting: Pre-punched key holes allow mounting of socket cap
assembly for housing, with vertically adjustable socket cap.
Reflector held in place with 6 steel pressure springs mounted on
housing frame.
Warranty: Covered by a 3 Year Warranty to be free of defects in
materials and craftsmanship.
Label: UL Listed, cETL Listed
Assembled in USA
2016.6.15
Junction Box: 16 gauge pre-wired galvanized steel Junction Box, 32 cubic-inch for a
maximum of (8) #12 AWG wires. Furnished with (6) 3/4" and (4) Romex knock-outs. Strain
clamps to install or remove covers for easy access and ground wire. Equipped with safety
standard fitting for flex-conduit.
Insulation Contact: Non-IC rated housing must be kept 3” from insulation.
Safety Labels: UL/CUL listed for through-branch wiring (8) No.12 AWG 90°C and suitable
for damp locations. NYC approved: Calendar #41937.
7 3/8"
8" ARCHITECTURAL HOUSING
LVH81 CFL 70W Max
UD
UE
ADV-SM
ADV-M7
ADV-M10
LUT-HL
LUT-TW
UE-347
E
BALLAST
:0-10V Dimming (120V/277V)
:120V/277V Electronic
:120V/277V Smart Mate
:120V/277V Mark VII Dimming
:120V Mark X Dimming*
:120V/277V Lutron 3-Wire Dimming
:120V Tu-wire Dimming
:347V Electronic
:120V Electronic
OPTIONS
Blank :None
-EM :Emergency (Remote)
-EMA :Emergency (Trim)
-FS :Fuse
Ordering example: LVH8118UD-EMA/LR801WWF
REFLECTOR / FLANGE FINISH
OPTION
LR801WWF :White Reflector/White Flange
Blank :None
LR801CNF :Clear Reflector/Natural Flange
-EMA :Integral EM Switch
LR801CWF :Clear Reflector/White Flange
LR801CCF :Clear Reflector/Clear Flange
LR801SSF :Satin Haze Reflector/Satin Haze Flange
ID#: 406_409
WATTAGE
LVH8113 :13W
LVH8118 :18W
LVH8126 :26W
LVH8126-42 :26W-42W**
LVH8132 :32W
LVH8142 :42W
LVH8157 :57W
LVH8170 :70W
SELF-FLANGED REFLECTOR
LR801 CFL 70W TTT, 26W DTT
9"
* **Multi-Watt Option Not Available for LUTRON Ballasts
Not available for 13W option.
A
Tel: 323.904.0200
Product specifications subject to change without notice.
www.liton.com
D I V I S I O N
L I G H T I N G
File Located online www.liton.com/spec
Socket: Thermo-plastic socket UL Listed rated for high temperature and provides nickel
plated contacts. Either accepts 2-Pin lamps for use with magnetic ballast or 4-Pin lamps
with electronic ballast selection. Vertically adjustable galvanized steel plate enables lamp
repositioning to optimize performance.
O F
G R O U P